| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Synopsys DesignWare PCIe host controller driver | |
| * | |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. | |
| * https://www.samsung.com | |
| * | |
| * Author: Jingoo Han <jg1.han@samsung.com> | |
| */ | |
| #include <linux/align.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/irqchip/chained_irq.h> | |
| #include <linux/irqchip/irq-msi-lib.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/msi.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_pci.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_regs.h> | |
| #include <linux/platform_device.h> | |
| #include "../pci-host-common.h" | |
| #include "../../pci.h" | |
| #include "pcie-designware.h" | |
| static struct pci_ops dw_pcie_ops; | |
| static struct pci_ops dw_pcie_ecam_ops; | |
| static struct pci_ops dw_child_pcie_ops; | |
| #ifdef CONFIG_SMP | |
| static void dw_irq_noop(struct irq_data *d) { } | |
| #endif | |
| static bool dw_pcie_init_dev_msi_info(struct device *dev, struct irq_domain *domain, | |
| struct irq_domain *real_parent, struct msi_domain_info *info) | |
| { | |
| if (!msi_lib_init_dev_msi_info(dev, domain, real_parent, info)) | |
| return false; | |
| #ifdef CONFIG_SMP | |
| info->chip->irq_ack = dw_irq_noop; | |
| info->chip->irq_pre_redirect = irq_chip_pre_redirect_parent; | |
| #else | |
| info->chip->irq_ack = irq_chip_ack_parent; | |
| #endif | |
| return true; | |
| } | |
| #define DW_PCIE_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS | \ | |
| MSI_FLAG_USE_DEF_CHIP_OPS | \ | |
| MSI_FLAG_PCI_MSI_MASK_PARENT) | |
| #define DW_PCIE_MSI_FLAGS_SUPPORTED (MSI_FLAG_MULTI_PCI_MSI | \ | |
| MSI_FLAG_PCI_MSIX | \ | |
| MSI_GENERIC_FLAGS_MASK) | |
| #define IS_256MB_ALIGNED(x) IS_ALIGNED(x, SZ_256M) | |
| static const struct msi_parent_ops dw_pcie_msi_parent_ops = { | |
| .required_flags = DW_PCIE_MSI_FLAGS_REQUIRED, | |
| .supported_flags = DW_PCIE_MSI_FLAGS_SUPPORTED, | |
| .bus_select_token = DOMAIN_BUS_PCI_MSI, | |
| .prefix = "DW-", | |
| .init_dev_msi_info = dw_pcie_init_dev_msi_info, | |
| }; | |
| /* MSI int handler */ | |
| void dw_handle_msi_irq(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| unsigned int i, num_ctrls; | |
| num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL; | |
| for (i = 0; i < num_ctrls; i++) { | |
| unsigned int reg_off = i * MSI_REG_CTRL_BLOCK_SIZE; | |
| unsigned int irq_off = i * MAX_MSI_IRQS_PER_CTRL; | |
| unsigned long status, pos; | |
| status = dw_pcie_readl_dbi(pci, PCIE_MSI_INTR0_STATUS + reg_off); | |
| if (!status) | |
| continue; | |
| for_each_set_bit(pos, &status, MAX_MSI_IRQS_PER_CTRL) | |
| generic_handle_demux_domain_irq(pp->irq_domain, irq_off + pos); | |
| } | |
| } | |
| /* Chained MSI interrupt service routine */ | |
| static void dw_chained_msi_isr(struct irq_desc *desc) | |
| { | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| struct dw_pcie_rp *pp; | |
| chained_irq_enter(chip, desc); | |
| pp = irq_desc_get_handler_data(desc); | |
| dw_handle_msi_irq(pp); | |
| chained_irq_exit(chip, desc); | |
| } | |
| static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg) | |
| { | |
| struct dw_pcie_rp *pp = irq_data_get_irq_chip_data(d); | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| u64 msi_target = (u64)pp->msi_data; | |
| msg->address_lo = lower_32_bits(msi_target); | |
| msg->address_hi = upper_32_bits(msi_target); | |
| msg->data = d->hwirq; | |
| dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n", | |
| (int)d->hwirq, msg->address_hi, msg->address_lo); | |
| } | |
| static void dw_pci_bottom_mask(struct irq_data *d) | |
| { | |
| struct dw_pcie_rp *pp = irq_data_get_irq_chip_data(d); | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| unsigned int res, bit, ctrl; | |
| guard(raw_spinlock)(&pp->lock); | |
| ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL; | |
| res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; | |
| bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; | |
| pp->irq_mask[ctrl] |= BIT(bit); | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res, pp->irq_mask[ctrl]); | |
| } | |
| static void dw_pci_bottom_unmask(struct irq_data *d) | |
| { | |
| struct dw_pcie_rp *pp = irq_data_get_irq_chip_data(d); | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| unsigned int res, bit, ctrl; | |
| guard(raw_spinlock)(&pp->lock); | |
| ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL; | |
| res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; | |
| bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; | |
| pp->irq_mask[ctrl] &= ~BIT(bit); | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res, pp->irq_mask[ctrl]); | |
| } | |
| static void dw_pci_bottom_ack(struct irq_data *d) | |
| { | |
| struct dw_pcie_rp *pp = irq_data_get_irq_chip_data(d); | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| unsigned int res, bit, ctrl; | |
| ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL; | |
| res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; | |
| bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_STATUS + res, BIT(bit)); | |
| } | |
| static struct irq_chip dw_pci_msi_bottom_irq_chip = { | |
| .name = "DWPCI-MSI", | |
| .irq_compose_msi_msg = dw_pci_setup_msi_msg, | |
| .irq_mask = dw_pci_bottom_mask, | |
| .irq_unmask = dw_pci_bottom_unmask, | |
| #ifdef CONFIG_SMP | |
| .irq_ack = dw_irq_noop, | |
| .irq_pre_redirect = dw_pci_bottom_ack, | |
| .irq_set_affinity = irq_chip_redirect_set_affinity, | |
| #else | |
| .irq_ack = dw_pci_bottom_ack, | |
| #endif | |
| }; | |
| static int dw_pcie_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs, void *args) | |
| { | |
| struct dw_pcie_rp *pp = domain->host_data; | |
| int bit; | |
| scoped_guard (raw_spinlock_irq, &pp->lock) { | |
| bit = bitmap_find_free_region(pp->msi_irq_in_use, pp->num_vectors, | |
| order_base_2(nr_irqs)); | |
| } | |
| if (bit < 0) | |
| return -ENOSPC; | |
| for (unsigned int i = 0; i < nr_irqs; i++) { | |
| irq_domain_set_info(domain, virq + i, bit + i, pp->msi_irq_chip, | |
| pp, handle_edge_irq, NULL, NULL); | |
| } | |
| return 0; | |
| } | |
| static void dw_pcie_irq_domain_free(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs) | |
| { | |
| struct irq_data *d = irq_domain_get_irq_data(domain, virq); | |
| struct dw_pcie_rp *pp = domain->host_data; | |
| guard(raw_spinlock_irq)(&pp->lock); | |
| bitmap_release_region(pp->msi_irq_in_use, d->hwirq, order_base_2(nr_irqs)); | |
| } | |
| static const struct irq_domain_ops dw_pcie_msi_domain_ops = { | |
| .alloc = dw_pcie_irq_domain_alloc, | |
| .free = dw_pcie_irq_domain_free, | |
| }; | |
| int dw_pcie_allocate_domains(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct irq_domain_info info = { | |
| .fwnode = dev_fwnode(pci->dev), | |
| .ops = &dw_pcie_msi_domain_ops, | |
| .size = pp->num_vectors, | |
| .host_data = pp, | |
| }; | |
| pp->irq_domain = msi_create_parent_irq_domain(&info, &dw_pcie_msi_parent_ops); | |
| if (!pp->irq_domain) { | |
| dev_err(pci->dev, "Failed to create IRQ domain\n"); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_allocate_domains); | |
| void dw_pcie_free_msi(struct dw_pcie_rp *pp) | |
| { | |
| u32 ctrl; | |
| for (ctrl = 0; ctrl < MAX_MSI_CTRLS; ctrl++) { | |
| if (pp->msi_irq[ctrl] > 0) | |
| irq_set_chained_handler_and_data(pp->msi_irq[ctrl], NULL, NULL); | |
| } | |
| irq_domain_remove(pp->irq_domain); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_free_msi); | |
| void dw_pcie_msi_init(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| u64 msi_target = (u64)pp->msi_data; | |
| u32 ctrl, num_ctrls; | |
| if (!pci_msi_enabled() || !pp->use_imsi_rx) | |
| return; | |
| num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL; | |
| /* Initialize IRQ Status array */ | |
| for (ctrl = 0; ctrl < num_ctrls; ctrl++) { | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + | |
| (ctrl * MSI_REG_CTRL_BLOCK_SIZE), | |
| pp->irq_mask[ctrl]); | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_ENABLE + | |
| (ctrl * MSI_REG_CTRL_BLOCK_SIZE), | |
| ~0); | |
| } | |
| /* Program the msi_data */ | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_LO, lower_32_bits(msi_target)); | |
| dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_HI, upper_32_bits(msi_target)); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_msi_init); | |
| static int dw_pcie_parse_split_msi_irq(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct device *dev = pci->dev; | |
| struct platform_device *pdev = to_platform_device(dev); | |
| u32 ctrl, max_vectors; | |
| int irq; | |
| /* Parse any "msiX" IRQs described in the devicetree */ | |
| for (ctrl = 0; ctrl < MAX_MSI_CTRLS; ctrl++) { | |
| char msi_name[] = "msiX"; | |
| msi_name[3] = '0' + ctrl; | |
| irq = platform_get_irq_byname_optional(pdev, msi_name); | |
| if (irq == -ENXIO) | |
| break; | |
| if (irq < 0) | |
| return dev_err_probe(dev, irq, | |
| "Failed to parse MSI IRQ '%s'\n", | |
| msi_name); | |
| pp->msi_irq[ctrl] = irq; | |
| } | |
| /* If no "msiX" IRQs, caller should fallback to "msi" IRQ */ | |
| if (ctrl == 0) | |
| return -ENXIO; | |
| max_vectors = ctrl * MAX_MSI_IRQS_PER_CTRL; | |
| if (pp->num_vectors > max_vectors) { | |
| dev_warn(dev, "Exceeding number of MSI vectors, limiting to %u\n", | |
| max_vectors); | |
| pp->num_vectors = max_vectors; | |
| } | |
| if (!pp->num_vectors) | |
| pp->num_vectors = max_vectors; | |
| return 0; | |
| } | |
| int dw_pcie_msi_host_init(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct device *dev = pci->dev; | |
| struct platform_device *pdev = to_platform_device(dev); | |
| u64 *msi_vaddr = NULL; | |
| int ret; | |
| u32 ctrl, num_ctrls; | |
| for (ctrl = 0; ctrl < MAX_MSI_CTRLS; ctrl++) | |
| pp->irq_mask[ctrl] = ~0; | |
| if (!pp->msi_irq[0]) { | |
| ret = dw_pcie_parse_split_msi_irq(pp); | |
| if (ret < 0 && ret != -ENXIO) | |
| return ret; | |
| } | |
| if (!pp->num_vectors) | |
| pp->num_vectors = MSI_DEF_NUM_VECTORS; | |
| num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL; | |
| if (!pp->msi_irq[0]) { | |
| pp->msi_irq[0] = platform_get_irq_byname_optional(pdev, "msi"); | |
| if (pp->msi_irq[0] < 0) { | |
| pp->msi_irq[0] = platform_get_irq(pdev, 0); | |
| if (pp->msi_irq[0] < 0) | |
| return pp->msi_irq[0]; | |
| } | |
| } | |
| dev_dbg(dev, "Using %d MSI vectors\n", pp->num_vectors); | |
| pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip; | |
| ret = dw_pcie_allocate_domains(pp); | |
| if (ret) | |
| return ret; | |
| for (ctrl = 0; ctrl < num_ctrls; ctrl++) { | |
| if (pp->msi_irq[ctrl] > 0) | |
| irq_set_chained_handler_and_data(pp->msi_irq[ctrl], | |
| dw_chained_msi_isr, pp); | |
| } | |
| /* | |
| * Even though the iMSI-RX Module supports 64-bit addresses some | |
| * peripheral PCIe devices may lack 64-bit message support. In | |
| * order not to miss MSI TLPs from those devices the MSI target | |
| * address has to be within the lowest 4GB. | |
| * | |
| * Per DWC databook r6.21a, section 3.10.2.3, the incoming MWr TLP | |
| * targeting the MSI_CTRL_ADDR is terminated by the iMSI-RX and never | |
| * appears on the AXI bus. So MSI_CTRL_ADDR address doesn't need to be | |
| * mapped and can be any memory that doesn't get allocated for the BAR | |
| * memory. Since most of the platforms provide 32-bit address for | |
| * 'config' region, try cfg0_base as the first option for the MSI target | |
| * address if it's a 32-bit address. Otherwise, try 32-bit and 64-bit | |
| * coherent memory allocation one by one. | |
| */ | |
| if (!(pp->cfg0_base & GENMASK_ULL(63, 32))) { | |
| pp->msi_data = pp->cfg0_base; | |
| return 0; | |
| } | |
| ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); | |
| if (!ret) | |
| msi_vaddr = dmam_alloc_coherent(dev, sizeof(u64), &pp->msi_data, | |
| GFP_KERNEL); | |
| if (!msi_vaddr) { | |
| dev_warn(dev, "Failed to allocate 32-bit MSI address\n"); | |
| dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); | |
| msi_vaddr = dmam_alloc_coherent(dev, sizeof(u64), &pp->msi_data, | |
| GFP_KERNEL); | |
| if (!msi_vaddr) { | |
| dev_err(dev, "Failed to allocate MSI address\n"); | |
| dw_pcie_free_msi(pp); | |
| return -ENOMEM; | |
| } | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_msi_host_init); | |
| static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct resource_entry *win; | |
| struct resource *res; | |
| win = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM); | |
| if (win) { | |
| res = devm_kzalloc(pci->dev, sizeof(*res), GFP_KERNEL); | |
| if (!res) | |
| return; | |
| /* | |
| * Allocate MSG TLP region of size 'region_align' at the end of | |
| * the host bridge window. | |
| */ | |
| res->start = win->res->end - pci->region_align + 1; | |
| res->end = win->res->end; | |
| res->name = "msg"; | |
| res->flags = win->res->flags | IORESOURCE_BUSY; | |
| if (!devm_request_resource(pci->dev, win->res, res)) | |
| pp->msg_res = res; | |
| } | |
| } | |
| static int dw_pcie_config_ecam_iatu(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct dw_pcie_ob_atu_cfg atu = {0}; | |
| resource_size_t bus_range_max; | |
| struct resource_entry *bus; | |
| int ret; | |
| bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS); | |
| /* | |
| * Root bus under the host bridge doesn't require any iATU configuration | |
| * as DBI region will be used to access root bus config space. | |
| * Immediate bus under Root Bus, needs type 0 iATU configuration and | |
| * remaining buses need type 1 iATU configuration. | |
| */ | |
| atu.index = 0; | |
| atu.type = PCIE_TLP_TYPE_CFG0_RDWR; | |
| atu.parent_bus_addr = pp->cfg0_base + SZ_1M; | |
| /* 1MiB is to cover 1 (bus) * 32 (devices) * 8 (functions) */ | |
| atu.size = SZ_1M; | |
| atu.ctrl2 = PCIE_ATU_CFG_SHIFT_MODE_ENABLE; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) | |
| return ret; | |
| bus_range_max = resource_size(bus->res); | |
| if (bus_range_max < 2) | |
| return 0; | |
| /* Configure remaining buses in type 1 iATU configuration */ | |
| atu.index = 1; | |
| atu.type = PCIE_TLP_TYPE_CFG1_RDWR; | |
| atu.parent_bus_addr = pp->cfg0_base + SZ_2M; | |
| atu.size = (SZ_1M * bus_range_max) - SZ_2M; | |
| atu.ctrl2 = PCIE_ATU_CFG_SHIFT_MODE_ENABLE; | |
| return dw_pcie_prog_outbound_atu(pci, &atu); | |
| } | |
| static int dw_pcie_create_ecam_window(struct dw_pcie_rp *pp, struct resource *res) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct device *dev = pci->dev; | |
| struct resource_entry *bus; | |
| bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS); | |
| if (!bus) | |
| return -ENODEV; | |
| pp->cfg = pci_ecam_create(dev, res, bus->res, &pci_generic_ecam_ops); | |
| if (IS_ERR(pp->cfg)) | |
| return PTR_ERR(pp->cfg); | |
| return 0; | |
| } | |
| static bool dw_pcie_ecam_enabled(struct dw_pcie_rp *pp, struct resource *config_res) | |
| { | |
| struct resource *bus_range; | |
| u64 nr_buses; | |
| /* Vendor glue drivers may implement their own ECAM mechanism */ | |
| if (pp->native_ecam) | |
| return false; | |
| /* | |
| * PCIe spec r6.0, sec 7.2.2 mandates the base address used for ECAM to | |
| * be aligned on a 2^(n+20) byte boundary, where n is the number of bits | |
| * used for representing 'bus' in BDF. Since the DWC cores always use 8 | |
| * bits for representing 'bus', the base address has to be aligned to | |
| * 2^28 byte boundary, which is 256 MiB. | |
| */ | |
| if (!IS_256MB_ALIGNED(config_res->start)) | |
| return false; | |
| bus_range = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS)->res; | |
| if (!bus_range) | |
| return false; | |
| nr_buses = resource_size(config_res) >> PCIE_ECAM_BUS_SHIFT; | |
| return nr_buses >= resource_size(bus_range); | |
| } | |
| static int dw_pcie_host_get_resources(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct device *dev = pci->dev; | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct resource_entry *win; | |
| struct resource *res; | |
| int ret; | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); | |
| if (!res) { | |
| dev_err(dev, "Missing \"config\" reg space\n"); | |
| return -ENODEV; | |
| } | |
| pp->cfg0_size = resource_size(res); | |
| pp->cfg0_base = res->start; | |
| pp->ecam_enabled = dw_pcie_ecam_enabled(pp, res); | |
| if (pp->ecam_enabled) { | |
| ret = dw_pcie_create_ecam_window(pp, res); | |
| if (ret) | |
| return ret; | |
| pp->bridge->ops = &dw_pcie_ecam_ops; | |
| pp->bridge->sysdata = pp->cfg; | |
| pp->cfg->priv = pp; | |
| } else { | |
| pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res); | |
| if (IS_ERR(pp->va_cfg0_base)) | |
| return PTR_ERR(pp->va_cfg0_base); | |
| /* Set default bus ops */ | |
| pp->bridge->ops = &dw_pcie_ops; | |
| pp->bridge->child_ops = &dw_child_pcie_ops; | |
| pp->bridge->sysdata = pp; | |
| } | |
| ret = dw_pcie_get_resources(pci); | |
| if (ret) { | |
| if (pp->cfg) | |
| pci_ecam_free(pp->cfg); | |
| return ret; | |
| } | |
| /* Get the I/O range from DT */ | |
| win = resource_list_first_type(&pp->bridge->windows, IORESOURCE_IO); | |
| if (win) { | |
| pp->io_size = resource_size(win->res); | |
| pp->io_bus_addr = win->res->start - win->offset; | |
| pp->io_base = pci_pio_to_address(win->res->start); | |
| } | |
| /* | |
| * visconti_pcie_cpu_addr_fixup() uses pp->io_base, so we have to | |
| * call dw_pcie_parent_bus_offset() after setting pp->io_base. | |
| */ | |
| pci->parent_bus_offset = dw_pcie_parent_bus_offset(pci, "config", | |
| pp->cfg0_base); | |
| return 0; | |
| } | |
| int dw_pcie_host_init(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct device *dev = pci->dev; | |
| struct device_node *np = dev->of_node; | |
| struct pci_host_bridge *bridge; | |
| int ret; | |
| raw_spin_lock_init(&pp->lock); | |
| bridge = devm_pci_alloc_host_bridge(dev, 0); | |
| if (!bridge) | |
| return -ENOMEM; | |
| pp->bridge = bridge; | |
| ret = dw_pcie_host_get_resources(pp); | |
| if (ret) | |
| return ret; | |
| if (pci_msi_enabled()) { | |
| pp->use_imsi_rx = !(pp->ops->msi_init || | |
| of_property_present(np, "msi-parent") || | |
| of_property_present(np, "msi-map")); | |
| } | |
| if (pp->ops->init) { | |
| ret = pp->ops->init(pp); | |
| if (ret) | |
| goto err_free_ecam; | |
| } | |
| if (pci_msi_enabled()) { | |
| /* | |
| * For the use_imsi_rx case the default assignment is handled | |
| * in the dw_pcie_msi_host_init(). | |
| */ | |
| if (!pp->use_imsi_rx && !pp->num_vectors) { | |
| pp->num_vectors = MSI_DEF_NUM_VECTORS; | |
| } else if (pp->num_vectors > MAX_MSI_IRQS) { | |
| dev_err(dev, "Invalid number of vectors\n"); | |
| ret = -EINVAL; | |
| goto err_deinit_host; | |
| } | |
| if (pp->ops->msi_init) { | |
| ret = pp->ops->msi_init(pp); | |
| if (ret < 0) | |
| goto err_deinit_host; | |
| } else if (pp->use_imsi_rx) { | |
| ret = dw_pcie_msi_host_init(pp); | |
| if (ret < 0) | |
| goto err_deinit_host; | |
| } | |
| } | |
| dw_pcie_version_detect(pci); | |
| dw_pcie_iatu_detect(pci); | |
| if (pci->num_lanes < 1) | |
| pci->num_lanes = dw_pcie_link_get_max_link_width(pci); | |
| ret = of_pci_get_equalization_presets(dev, &pp->presets, pci->num_lanes); | |
| if (ret) | |
| goto err_free_msi; | |
| /* | |
| * Allocate the resource for MSG TLP before programming the iATU | |
| * outbound window in dw_pcie_setup_rc(). Since the allocation depends | |
| * on the value of 'region_align', this has to be done after | |
| * dw_pcie_iatu_detect(). | |
| * | |
| * Glue drivers need to set 'use_atu_msg' before dw_pcie_host_init() to | |
| * make use of the generic MSG TLP implementation. | |
| */ | |
| if (pp->use_atu_msg) | |
| dw_pcie_host_request_msg_tlp_res(pp); | |
| ret = dw_pcie_edma_detect(pci); | |
| if (ret) | |
| goto err_free_msi; | |
| ret = dw_pcie_setup_rc(pp); | |
| if (ret) | |
| goto err_remove_edma; | |
| if (!dw_pcie_link_up(pci)) { | |
| ret = dw_pcie_start_link(pci); | |
| if (ret) | |
| goto err_remove_edma; | |
| } | |
| /* | |
| * Only fail on timeout error. Other errors indicate the device may | |
| * become available later, so continue without failing. | |
| */ | |
| ret = dw_pcie_wait_for_link(pci); | |
| if (ret == -ETIMEDOUT) | |
| goto err_stop_link; | |
| ret = pci_host_probe(bridge); | |
| if (ret) | |
| goto err_stop_link; | |
| if (pp->ops->post_init) | |
| pp->ops->post_init(pp); | |
| dwc_pcie_debugfs_init(pci, DW_PCIE_RC_TYPE); | |
| return 0; | |
| err_stop_link: | |
| dw_pcie_stop_link(pci); | |
| err_remove_edma: | |
| dw_pcie_edma_remove(pci); | |
| err_free_msi: | |
| if (pp->use_imsi_rx) | |
| dw_pcie_free_msi(pp); | |
| err_deinit_host: | |
| if (pp->ops->deinit) | |
| pp->ops->deinit(pp); | |
| err_free_ecam: | |
| if (pp->cfg) | |
| pci_ecam_free(pp->cfg); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_host_init); | |
| void dw_pcie_host_deinit(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| dwc_pcie_debugfs_deinit(pci); | |
| pci_lock_rescan_remove(); | |
| pci_stop_root_bus(pp->bridge->bus); | |
| pci_remove_root_bus(pp->bridge->bus); | |
| pci_unlock_rescan_remove(); | |
| dw_pcie_stop_link(pci); | |
| dw_pcie_edma_remove(pci); | |
| if (pp->use_imsi_rx) | |
| dw_pcie_free_msi(pp); | |
| if (pp->ops->deinit) | |
| pp->ops->deinit(pp); | |
| if (pp->cfg) | |
| pci_ecam_free(pp->cfg); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_host_deinit); | |
| static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus, | |
| unsigned int devfn, int where) | |
| { | |
| struct dw_pcie_rp *pp = bus->sysdata; | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct dw_pcie_ob_atu_cfg atu = { 0 }; | |
| int type, ret; | |
| u32 busdev; | |
| /* | |
| * Checking whether the link is up here is a last line of defense | |
| * against platforms that forward errors on the system bus as | |
| * SError upon PCI configuration transactions issued when the link | |
| * is down. This check is racy by definition and does not stop | |
| * the system from triggering an SError if the link goes down | |
| * after this check is performed. | |
| */ | |
| if (!dw_pcie_link_up(pci)) | |
| return NULL; | |
| busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | | |
| PCIE_ATU_FUNC(PCI_FUNC(devfn)); | |
| if (pci_is_root_bus(bus->parent)) | |
| type = PCIE_TLP_TYPE_CFG0_RDWR; | |
| else | |
| type = PCIE_TLP_TYPE_CFG1_RDWR; | |
| atu.type = type; | |
| atu.parent_bus_addr = pp->cfg0_base - pci->parent_bus_offset; | |
| atu.pci_addr = busdev; | |
| atu.size = pp->cfg0_size; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) | |
| return NULL; | |
| return pp->va_cfg0_base + where; | |
| } | |
| static int dw_pcie_rd_other_conf(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 *val) | |
| { | |
| struct dw_pcie_rp *pp = bus->sysdata; | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct dw_pcie_ob_atu_cfg atu = { 0 }; | |
| int ret; | |
| ret = pci_generic_config_read(bus, devfn, where, size, val); | |
| if (ret != PCIBIOS_SUCCESSFUL) | |
| return ret; | |
| if (pp->cfg0_io_shared) { | |
| atu.type = PCIE_TLP_TYPE_IO_RDWR; | |
| atu.parent_bus_addr = pp->io_base - pci->parent_bus_offset; | |
| atu.pci_addr = pp->io_bus_addr; | |
| atu.size = pp->io_size; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) | |
| return PCIBIOS_SET_FAILED; | |
| } | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| static int dw_pcie_wr_other_conf(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 val) | |
| { | |
| struct dw_pcie_rp *pp = bus->sysdata; | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct dw_pcie_ob_atu_cfg atu = { 0 }; | |
| int ret; | |
| ret = pci_generic_config_write(bus, devfn, where, size, val); | |
| if (ret != PCIBIOS_SUCCESSFUL) | |
| return ret; | |
| if (pp->cfg0_io_shared) { | |
| atu.type = PCIE_TLP_TYPE_IO_RDWR; | |
| atu.parent_bus_addr = pp->io_base - pci->parent_bus_offset; | |
| atu.pci_addr = pp->io_bus_addr; | |
| atu.size = pp->io_size; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) | |
| return PCIBIOS_SET_FAILED; | |
| } | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| static struct pci_ops dw_child_pcie_ops = { | |
| .map_bus = dw_pcie_other_conf_map_bus, | |
| .read = dw_pcie_rd_other_conf, | |
| .write = dw_pcie_wr_other_conf, | |
| }; | |
| void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus, unsigned int devfn, int where) | |
| { | |
| struct dw_pcie_rp *pp = bus->sysdata; | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| if (PCI_SLOT(devfn) > 0) | |
| return NULL; | |
| return pci->dbi_base + where; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_own_conf_map_bus); | |
| static void __iomem *dw_pcie_ecam_conf_map_bus(struct pci_bus *bus, unsigned int devfn, int where) | |
| { | |
| struct pci_config_window *cfg = bus->sysdata; | |
| struct dw_pcie_rp *pp = cfg->priv; | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| unsigned int busn = bus->number; | |
| if (busn > 0) | |
| return pci_ecam_map_bus(bus, devfn, where); | |
| if (PCI_SLOT(devfn) > 0) | |
| return NULL; | |
| return pci->dbi_base + where; | |
| } | |
| static struct pci_ops dw_pcie_ops = { | |
| .map_bus = dw_pcie_own_conf_map_bus, | |
| .read = pci_generic_config_read, | |
| .write = pci_generic_config_write, | |
| }; | |
| static struct pci_ops dw_pcie_ecam_ops = { | |
| .map_bus = dw_pcie_ecam_conf_map_bus, | |
| .read = pci_generic_config_read, | |
| .write = pci_generic_config_write, | |
| }; | |
| static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| struct dw_pcie_ob_atu_cfg atu = { 0 }; | |
| struct resource_entry *entry; | |
| int ob_iatu_index; | |
| int ib_iatu_index; | |
| int i, ret; | |
| if (!pci->num_ob_windows) { | |
| dev_err(pci->dev, "No outbound iATU found\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Ensure all out/inbound windows are disabled before proceeding with | |
| * the MEM/IO (dma-)ranges setups. | |
| */ | |
| for (i = 0; i < pci->num_ob_windows; i++) | |
| dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i); | |
| for (i = 0; i < pci->num_ib_windows; i++) | |
| dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i); | |
| /* | |
| * NOTE: For outbound address translation, outbound iATU at index 0 is | |
| * reserved for CFG IOs (dw_pcie_other_conf_map_bus()), thus start at | |
| * index 1. | |
| * | |
| * If using ECAM, outbound iATU at index 0 and index 1 is reserved for | |
| * CFG IOs. | |
| */ | |
| if (pp->ecam_enabled) { | |
| ob_iatu_index = 2; | |
| ret = dw_pcie_config_ecam_iatu(pp); | |
| if (ret) { | |
| dev_err(pci->dev, "Failed to configure iATU in ECAM mode\n"); | |
| return ret; | |
| } | |
| } else { | |
| ob_iatu_index = 1; | |
| } | |
| resource_list_for_each_entry(entry, &pp->bridge->windows) { | |
| resource_size_t res_size; | |
| if (resource_type(entry->res) != IORESOURCE_MEM) | |
| continue; | |
| atu.type = PCIE_TLP_TYPE_MEM_RDWR; | |
| atu.parent_bus_addr = entry->res->start - pci->parent_bus_offset; | |
| atu.pci_addr = entry->res->start - entry->offset; | |
| /* Adjust iATU size if MSG TLP region was allocated before */ | |
| if (pp->msg_res && pp->msg_res->parent == entry->res) | |
| res_size = resource_size(entry->res) - | |
| resource_size(pp->msg_res); | |
| else | |
| res_size = resource_size(entry->res); | |
| while (res_size > 0) { | |
| /* | |
| * Return failure if we run out of windows in the | |
| * middle. Otherwise, we would end up only partially | |
| * mapping a single resource. | |
| */ | |
| if (ob_iatu_index >= pci->num_ob_windows) { | |
| dev_err(pci->dev, "Cannot add outbound window for region: %pr\n", | |
| entry->res); | |
| return -ENOMEM; | |
| } | |
| atu.index = ob_iatu_index; | |
| atu.size = MIN(pci->region_limit + 1, res_size); | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) { | |
| dev_err(pci->dev, "Failed to set MEM range %pr\n", | |
| entry->res); | |
| return ret; | |
| } | |
| ob_iatu_index++; | |
| atu.parent_bus_addr += atu.size; | |
| atu.pci_addr += atu.size; | |
| res_size -= atu.size; | |
| } | |
| } | |
| if (pp->io_size) { | |
| if (ob_iatu_index < pci->num_ob_windows) { | |
| atu.index = ob_iatu_index; | |
| atu.type = PCIE_TLP_TYPE_IO_RDWR; | |
| atu.parent_bus_addr = pp->io_base - pci->parent_bus_offset; | |
| atu.pci_addr = pp->io_bus_addr; | |
| atu.size = pp->io_size; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) { | |
| dev_err(pci->dev, "Failed to set IO range %pr\n", | |
| entry->res); | |
| return ret; | |
| } | |
| ob_iatu_index++; | |
| } else { | |
| /* | |
| * If there are not enough outbound windows to give I/O | |
| * space its own iATU, the outbound iATU at index 0 will | |
| * be shared between I/O space and CFG IOs, by | |
| * temporarily reconfiguring the iATU to CFG space, in | |
| * order to do a CFG IO, and then immediately restoring | |
| * it to I/O space. This is only implemented when using | |
| * dw_pcie_other_conf_map_bus(), which is not the case | |
| * when using ECAM. | |
| */ | |
| if (pp->ecam_enabled) { | |
| dev_err(pci->dev, "Cannot add outbound window for I/O\n"); | |
| return -ENOMEM; | |
| } | |
| pp->cfg0_io_shared = true; | |
| } | |
| } | |
| if (pp->use_atu_msg) { | |
| if (ob_iatu_index >= pci->num_ob_windows) { | |
| dev_err(pci->dev, "Cannot add outbound window for MSG TLP\n"); | |
| return -ENOMEM; | |
| } | |
| pp->msg_atu_index = ob_iatu_index++; | |
| } | |
| ib_iatu_index = 0; | |
| resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) { | |
| resource_size_t res_start, res_size, window_size; | |
| if (resource_type(entry->res) != IORESOURCE_MEM) | |
| continue; | |
| res_size = resource_size(entry->res); | |
| res_start = entry->res->start; | |
| while (res_size > 0) { | |
| /* | |
| * Return failure if we run out of windows in the | |
| * middle. Otherwise, we would end up only partially | |
| * mapping a single resource. | |
| */ | |
| if (ib_iatu_index >= pci->num_ib_windows) { | |
| dev_err(pci->dev, "Cannot add inbound window for region: %pr\n", | |
| entry->res); | |
| return -ENOMEM; | |
| } | |
| window_size = MIN(pci->region_limit + 1, res_size); | |
| ret = dw_pcie_prog_inbound_atu(pci, ib_iatu_index, | |
| PCIE_TLP_TYPE_MEM_RDWR, res_start, | |
| res_start - entry->offset, window_size); | |
| if (ret) { | |
| dev_err(pci->dev, "Failed to set DMA range %pr\n", | |
| entry->res); | |
| return ret; | |
| } | |
| ib_iatu_index++; | |
| res_start += window_size; | |
| res_size -= window_size; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void dw_pcie_program_presets(struct dw_pcie_rp *pp, enum pci_bus_speed speed) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| u8 lane_eq_offset, lane_reg_size, cap_id; | |
| u8 *presets; | |
| u32 cap; | |
| int i; | |
| if (speed == PCIE_SPEED_8_0GT) { | |
| presets = (u8 *)pp->presets.eq_presets_8gts; | |
| lane_eq_offset = PCI_SECPCI_LE_CTRL; | |
| cap_id = PCI_EXT_CAP_ID_SECPCI; | |
| /* For data rate of 8 GT/S each lane equalization control is 16bits wide*/ | |
| lane_reg_size = 0x2; | |
| } else if (speed == PCIE_SPEED_16_0GT) { | |
| presets = pp->presets.eq_presets_Ngts[EQ_PRESET_TYPE_16GTS - 1]; | |
| lane_eq_offset = PCI_PL_16GT_LE_CTRL; | |
| cap_id = PCI_EXT_CAP_ID_PL_16GT; | |
| lane_reg_size = 0x1; | |
| } else if (speed == PCIE_SPEED_32_0GT) { | |
| presets = pp->presets.eq_presets_Ngts[EQ_PRESET_TYPE_32GTS - 1]; | |
| lane_eq_offset = PCI_PL_32GT_LE_CTRL; | |
| cap_id = PCI_EXT_CAP_ID_PL_32GT; | |
| lane_reg_size = 0x1; | |
| } else if (speed == PCIE_SPEED_64_0GT) { | |
| presets = pp->presets.eq_presets_Ngts[EQ_PRESET_TYPE_64GTS - 1]; | |
| lane_eq_offset = PCI_PL_64GT_LE_CTRL; | |
| cap_id = PCI_EXT_CAP_ID_PL_64GT; | |
| lane_reg_size = 0x1; | |
| } else { | |
| return; | |
| } | |
| if (presets[0] == PCI_EQ_RESV) | |
| return; | |
| cap = dw_pcie_find_ext_capability(pci, cap_id); | |
| if (!cap) | |
| return; | |
| /* | |
| * Write preset values to the registers byte-by-byte for the given | |
| * number of lanes and register size. | |
| */ | |
| for (i = 0; i < pci->num_lanes * lane_reg_size; i++) | |
| dw_pcie_writeb_dbi(pci, cap + lane_eq_offset + i, presets[i]); | |
| } | |
| static void dw_pcie_config_presets(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| enum pci_bus_speed speed = pcie_get_link_speed(pci->max_link_speed); | |
| /* | |
| * Lane equalization settings need to be applied for all data rates the | |
| * controller supports and for all supported lanes. | |
| */ | |
| if (speed >= PCIE_SPEED_8_0GT) | |
| dw_pcie_program_presets(pp, PCIE_SPEED_8_0GT); | |
| if (speed >= PCIE_SPEED_16_0GT) | |
| dw_pcie_program_presets(pp, PCIE_SPEED_16_0GT); | |
| if (speed >= PCIE_SPEED_32_0GT) | |
| dw_pcie_program_presets(pp, PCIE_SPEED_32_0GT); | |
| if (speed >= PCIE_SPEED_64_0GT) | |
| dw_pcie_program_presets(pp, PCIE_SPEED_64_0GT); | |
| } | |
| int dw_pcie_setup_rc(struct dw_pcie_rp *pp) | |
| { | |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); | |
| u32 val; | |
| int ret; | |
| /* | |
| * Enable DBI read-only registers for writing/updating configuration. | |
| * Write permission gets disabled towards the end of this function. | |
| */ | |
| dw_pcie_dbi_ro_wr_en(pci); | |
| dw_pcie_setup(pci); | |
| dw_pcie_msi_init(pp); | |
| /* Setup RC BARs */ | |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0x00000004); | |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0x00000000); | |
| /* Setup interrupt pins */ | |
| val = dw_pcie_readl_dbi(pci, PCI_INTERRUPT_LINE); | |
| val &= 0xffff00ff; | |
| val |= 0x00000100; | |
| dw_pcie_writel_dbi(pci, PCI_INTERRUPT_LINE, val); | |
| /* Setup bus numbers */ | |
| val = dw_pcie_readl_dbi(pci, PCI_PRIMARY_BUS); | |
| val &= 0xff000000; | |
| val |= 0x00ff0100; | |
| dw_pcie_writel_dbi(pci, PCI_PRIMARY_BUS, val); | |
| /* Setup command register */ | |
| val = dw_pcie_readl_dbi(pci, PCI_COMMAND); | |
| val &= 0xffff0000; | |
| val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | | |
| PCI_COMMAND_MASTER | PCI_COMMAND_SERR; | |
| dw_pcie_writel_dbi(pci, PCI_COMMAND, val); | |
| dw_pcie_hide_unsupported_l1ss(pci); | |
| dw_pcie_config_presets(pp); | |
| /* | |
| * If the platform provides its own child bus config accesses, it means | |
| * the platform uses its own address translation component rather than | |
| * ATU, so we should not program the ATU here. | |
| */ | |
| if (pp->bridge->child_ops == &dw_child_pcie_ops || pp->ecam_enabled) { | |
| ret = dw_pcie_iatu_setup(pp); | |
| if (ret) | |
| return ret; | |
| } | |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); | |
| /* Program correct class for RC */ | |
| dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_PCI); | |
| val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); | |
| val |= PORT_LOGIC_SPEED_CHANGE; | |
| dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); | |
| dw_pcie_dbi_ro_wr_dis(pci); | |
| /* | |
| * The iMSI-RX module does not support receiving MSI or MSI-X generated | |
| * by the Root Port. If iMSI-RX is used as the MSI controller, remove | |
| * the MSI and MSI-X capabilities of the Root Port to allow the drivers | |
| * to fall back to INTx instead. | |
| */ | |
| if (pp->use_imsi_rx && !pp->keep_rp_msi_en) { | |
| dw_pcie_remove_capability(pci, PCI_CAP_ID_MSI); | |
| dw_pcie_remove_capability(pci, PCI_CAP_ID_MSIX); | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_setup_rc); | |
| static int dw_pcie_pme_turn_off(struct dw_pcie *pci) | |
| { | |
| struct dw_pcie_ob_atu_cfg atu = { 0 }; | |
| void __iomem *mem; | |
| int ret; | |
| if (pci->num_ob_windows <= pci->pp.msg_atu_index) | |
| return -ENOSPC; | |
| if (!pci->pp.msg_res) | |
| return -ENOSPC; | |
| atu.code = PCIE_MSG_CODE_PME_TURN_OFF; | |
| atu.routing = PCIE_MSG_TYPE_R_BC; | |
| atu.type = PCIE_TLP_TYPE_MSG; | |
| atu.size = resource_size(pci->pp.msg_res); | |
| atu.index = pci->pp.msg_atu_index; | |
| atu.parent_bus_addr = pci->pp.msg_res->start - pci->parent_bus_offset; | |
| ret = dw_pcie_prog_outbound_atu(pci, &atu); | |
| if (ret) | |
| return ret; | |
| mem = ioremap(pci->pp.msg_res->start, pci->region_align); | |
| if (!mem) | |
| return -ENOMEM; | |
| /* A dummy write is converted to a Msg TLP */ | |
| writel(0, mem); | |
| iounmap(mem); | |
| return 0; | |
| } | |
| int dw_pcie_suspend_noirq(struct dw_pcie *pci) | |
| { | |
| bool pme_capable = false; | |
| int ret = 0; | |
| u32 val; | |
| if (!dw_pcie_link_up(pci)) | |
| goto stop_link; | |
| if (!pci_host_common_d3cold_possible(pci->pp.bridge, &pme_capable)) | |
| return 0; | |
| if (pci->pp.ops->pme_turn_off) { | |
| pci->pp.ops->pme_turn_off(&pci->pp); | |
| } else { | |
| ret = dw_pcie_pme_turn_off(pci); | |
| if (ret) | |
| return ret; | |
| } | |
| /* | |
| * Some SoCs do not support reading the LTSSM register after | |
| * PME_Turn_Off broadcast. For those SoCs, skip waiting for L2/L3 Ready | |
| * state and wait 10ms as recommended in PCIe spec r6.0, sec 5.3.3.2.1. | |
| */ | |
| if (pci->pp.skip_l23_ready) { | |
| mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000); | |
| goto stop_link; | |
| } | |
| ret = read_poll_timeout(dw_pcie_get_ltssm, val, | |
| val == DW_PCIE_LTSSM_L2_IDLE || | |
| val <= DW_PCIE_LTSSM_DETECT_WAIT, | |
| PCIE_PME_TO_L2_TIMEOUT_US/10, | |
| PCIE_PME_TO_L2_TIMEOUT_US, false, pci); | |
| if (ret) { | |
| /* | |
| * Failure is non-fatal since spec r7.0, sec 5.3.3.2.1, | |
| * recommends proceeding with L2/L3 sequence even if one or more | |
| * devices do not respond with PME_TO_Ack after 10ms timeout. | |
| */ | |
| dev_warn(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val); | |
| ret = 0; | |
| } | |
| /* | |
| * Per PCIe r6.0, sec 5.3.3.2.1, software should wait at least | |
| * 100ns after L2/L3 Ready before turning off refclock and | |
| * main power. This is harmless when no endpoint is connected. | |
| */ | |
| udelay(1); | |
| stop_link: | |
| /* | |
| * TODO: "pme_capable" means some downstream device is wakeup- | |
| * enabled and is capable of generating PME from D3cold, which | |
| * requires auxiliary power. Instead of always skipping power off | |
| * if PME is supported from D3cold, query the pwrctrl core and skip | |
| * power off only if device supports PME from D3cold and Vaux is | |
| * not supported. | |
| */ | |
| pci->pp.skip_pwrctrl_off = pme_capable; | |
| dw_pcie_stop_link(pci); | |
| if (pci->pp.ops->deinit) | |
| pci->pp.ops->deinit(&pci->pp); | |
| pci->suspended = true; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_suspend_noirq); | |
| int dw_pcie_resume_noirq(struct dw_pcie *pci) | |
| { | |
| int ret; | |
| if (!pci->suspended) | |
| return 0; | |
| if (pci->pp.ops->init) { | |
| ret = pci->pp.ops->init(&pci->pp); | |
| if (ret) { | |
| dev_err(pci->dev, "Host init failed: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| dw_pcie_setup_rc(&pci->pp); | |
| ret = dw_pcie_start_link(pci); | |
| if (ret) | |
| goto err_deinit; | |
| ret = dw_pcie_wait_for_link(pci); | |
| if (ret == -ETIMEDOUT) | |
| goto err_stop_link; | |
| if (pci->pp.ops->post_init) | |
| pci->pp.ops->post_init(&pci->pp); | |
| pci->suspended = false; | |
| return 0; | |
| err_stop_link: | |
| dw_pcie_stop_link(pci); | |
| err_deinit: | |
| if (pci->pp.ops->deinit) | |
| pci->pp.ops->deinit(&pci->pp); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_pcie_resume_noirq); |