| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * NVMe I/O command implementation. | |
| * Copyright (c) 2015-2016 HGST, a Western Digital Company. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/blkdev.h> | |
| #include <linux/blk-integrity.h> | |
| #include <linux/memremap.h> | |
| #include <linux/module.h> | |
| #include "nvmet.h" | |
| void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) | |
| { | |
| /* Logical blocks per physical block, 0's based. */ | |
| const __le16 lpp0b = to0based(bdev_physical_block_size(bdev) / | |
| bdev_logical_block_size(bdev)); | |
| /* | |
| * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN, | |
| * NAWUPF, and NACWU are defined for this namespace and should be | |
| * used by the host for this namespace instead of the AWUN, AWUPF, | |
| * and ACWU fields in the Identify Controller data structure. If | |
| * any of these fields are zero that means that the corresponding | |
| * field from the identify controller data structure should be used. | |
| */ | |
| id->nsfeat |= 1 << 1; | |
| id->nawun = lpp0b; | |
| id->nawupf = lpp0b; | |
| id->nacwu = lpp0b; | |
| /* | |
| * OPTPERF = 11b indicates that the fields NPWG, NPWA, NPDG, NPDA, | |
| * NPDGL, NPDAL, and NOWS are defined for this namespace and should be | |
| * used by the host for I/O optimization. | |
| */ | |
| id->nsfeat |= 0x3 << NVME_NS_FEAT_OPTPERF_SHIFT; | |
| /* NPWG = Namespace Preferred Write Granularity. 0's based */ | |
| id->npwg = to0based(bdev_io_min(bdev) / bdev_logical_block_size(bdev)); | |
| /* NPWA = Namespace Preferred Write Alignment. 0's based */ | |
| id->npwa = id->npwg; | |
| /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */ | |
| id->npdg = to0based(bdev_discard_granularity(bdev) / | |
| bdev_logical_block_size(bdev)); | |
| /* NPDG = Namespace Preferred Deallocate Alignment */ | |
| id->npda = id->npdg; | |
| /* NOWS = Namespace Optimal Write Size */ | |
| id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); | |
| /* Set WZDS and DRB if device supports unmapped write zeroes */ | |
| if (bdev_write_zeroes_unmap_sectors(bdev)) | |
| id->dlfeat = (1 << 3) | 0x1; | |
| } | |
| void nvmet_bdev_set_nvm_limits(struct block_device *bdev, | |
| struct nvme_id_ns_nvm *id) | |
| { | |
| /* | |
| * NPDGL = Namespace Preferred Deallocate Granularity Large | |
| * NPDAL = Namespace Preferred Deallocate Alignment Large | |
| */ | |
| id->npdgl = id->npdal = cpu_to_le32(bdev_discard_granularity(bdev) / | |
| bdev_logical_block_size(bdev)); | |
| } | |
| void nvmet_bdev_ns_disable(struct nvmet_ns *ns) | |
| { | |
| if (ns->bdev_file) { | |
| fput(ns->bdev_file); | |
| ns->bdev = NULL; | |
| ns->bdev_file = NULL; | |
| } | |
| } | |
| static void nvmet_bdev_ns_enable_integrity(struct nvmet_ns *ns) | |
| { | |
| struct blk_integrity *bi = bdev_get_integrity(ns->bdev); | |
| if (!bi) | |
| return; | |
| if (bi->csum_type == BLK_INTEGRITY_CSUM_CRC) { | |
| ns->metadata_size = bi->metadata_size; | |
| if (bi->flags & BLK_INTEGRITY_REF_TAG) | |
| ns->pi_type = NVME_NS_DPS_PI_TYPE1; | |
| else | |
| ns->pi_type = NVME_NS_DPS_PI_TYPE3; | |
| } else { | |
| ns->metadata_size = 0; | |
| } | |
| } | |
| int nvmet_bdev_ns_enable(struct nvmet_ns *ns) | |
| { | |
| int ret; | |
| /* | |
| * When buffered_io namespace attribute is enabled that means user want | |
| * this block device to be used as a file, so block device can take | |
| * an advantage of cache. | |
| */ | |
| if (ns->buffered_io) | |
| return -ENOTBLK; | |
| ns->bdev_file = bdev_file_open_by_path(ns->device_path, | |
| BLK_OPEN_READ | BLK_OPEN_WRITE, NULL, NULL); | |
| if (IS_ERR(ns->bdev_file)) { | |
| ret = PTR_ERR(ns->bdev_file); | |
| if (ret != -ENOTBLK) { | |
| pr_err("failed to open block device %s: (%d)\n", | |
| ns->device_path, ret); | |
| } | |
| ns->bdev_file = NULL; | |
| return ret; | |
| } | |
| ns->bdev = file_bdev(ns->bdev_file); | |
| ns->size = bdev_nr_bytes(ns->bdev); | |
| ns->blksize_shift = blksize_bits(bdev_logical_block_size(ns->bdev)); | |
| ns->pi_type = 0; | |
| ns->metadata_size = 0; | |
| if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY)) | |
| nvmet_bdev_ns_enable_integrity(ns); | |
| if (bdev_is_zoned(ns->bdev)) { | |
| if (!nvmet_bdev_zns_enable(ns)) { | |
| nvmet_bdev_ns_disable(ns); | |
| return -EINVAL; | |
| } | |
| ns->csi = NVME_CSI_ZNS; | |
| } | |
| return 0; | |
| } | |
| void nvmet_bdev_ns_revalidate(struct nvmet_ns *ns) | |
| { | |
| ns->size = bdev_nr_bytes(ns->bdev); | |
| } | |
| u16 blk_to_nvme_status(struct nvmet_req *req, blk_status_t blk_sts) | |
| { | |
| u16 status = NVME_SC_SUCCESS; | |
| if (likely(blk_sts == BLK_STS_OK)) | |
| return status; | |
| /* | |
| * Right now there exists M : 1 mapping between block layer error | |
| * to the NVMe status code (see nvme_error_status()). For consistency, | |
| * when we reverse map we use most appropriate NVMe Status code from | |
| * the group of the NVMe status codes used in the nvme_error_status(). | |
| */ | |
| switch (blk_sts) { | |
| case BLK_STS_NOSPC: | |
| status = NVME_SC_CAP_EXCEEDED | NVME_STATUS_DNR; | |
| req->error_loc = offsetof(struct nvme_rw_command, length); | |
| break; | |
| case BLK_STS_TARGET: | |
| status = NVME_SC_LBA_RANGE | NVME_STATUS_DNR; | |
| req->error_loc = offsetof(struct nvme_rw_command, slba); | |
| break; | |
| case BLK_STS_NOTSUPP: | |
| status = NVME_SC_INVALID_OPCODE | NVME_STATUS_DNR; | |
| req->error_loc = offsetof(struct nvme_common_command, opcode); | |
| break; | |
| case BLK_STS_MEDIUM: | |
| status = NVME_SC_ACCESS_DENIED; | |
| req->error_loc = offsetof(struct nvme_rw_command, nsid); | |
| break; | |
| case BLK_STS_IOERR: | |
| default: | |
| status = NVME_SC_INTERNAL | NVME_STATUS_DNR; | |
| req->error_loc = offsetof(struct nvme_common_command, opcode); | |
| } | |
| switch (req->cmd->common.opcode) { | |
| case nvme_cmd_read: | |
| case nvme_cmd_write: | |
| req->error_slba = le64_to_cpu(req->cmd->rw.slba); | |
| break; | |
| case nvme_cmd_write_zeroes: | |
| req->error_slba = | |
| le64_to_cpu(req->cmd->write_zeroes.slba); | |
| break; | |
| default: | |
| req->error_slba = 0; | |
| } | |
| return status; | |
| } | |
| static void nvmet_bio_done(struct bio *bio) | |
| { | |
| struct nvmet_req *req = bio->bi_private; | |
| blk_status_t blk_status = bio->bi_status; | |
| nvmet_req_bio_put(req, bio); | |
| nvmet_req_complete(req, blk_to_nvme_status(req, blk_status)); | |
| } | |
| #ifdef CONFIG_BLK_DEV_INTEGRITY | |
| static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, | |
| struct sg_mapping_iter *miter) | |
| { | |
| struct blk_integrity *bi; | |
| struct bio_integrity_payload *bip; | |
| int rc; | |
| size_t resid, len; | |
| bi = bdev_get_integrity(req->ns->bdev); | |
| if (unlikely(!bi)) { | |
| pr_err("Unable to locate bio_integrity\n"); | |
| return -ENODEV; | |
| } | |
| bip = bio_integrity_alloc(bio, GFP_NOIO, | |
| bio_max_segs(req->metadata_sg_cnt)); | |
| if (IS_ERR(bip)) { | |
| pr_err("Unable to allocate bio_integrity_payload\n"); | |
| return PTR_ERR(bip); | |
| } | |
| /* virtual start sector must be in integrity interval units */ | |
| bip_set_seed(bip, bio->bi_iter.bi_sector >> | |
| (bi->interval_exp - SECTOR_SHIFT)); | |
| resid = bio_integrity_bytes(bi, bio_sectors(bio)); | |
| while (resid > 0 && sg_miter_next(miter)) { | |
| len = min_t(size_t, miter->length, resid); | |
| rc = bio_integrity_add_page(bio, miter->page, len, | |
| offset_in_page(miter->addr)); | |
| if (unlikely(rc != len)) { | |
| pr_err("bio_integrity_add_page() failed; %d\n", rc); | |
| sg_miter_stop(miter); | |
| return -ENOMEM; | |
| } | |
| resid -= len; | |
| if (len < miter->length) | |
| miter->consumed -= miter->length - len; | |
| } | |
| sg_miter_stop(miter); | |
| return 0; | |
| } | |
| #else | |
| static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, | |
| struct sg_mapping_iter *miter) | |
| { | |
| return -EINVAL; | |
| } | |
| #endif /* CONFIG_BLK_DEV_INTEGRITY */ | |
| static void nvmet_bdev_execute_rw(struct nvmet_req *req) | |
| { | |
| unsigned int sg_cnt = req->sg_cnt; | |
| struct bio *bio; | |
| struct scatterlist *sg; | |
| struct blk_plug plug; | |
| sector_t sector; | |
| blk_opf_t opf; | |
| int i, rc; | |
| struct sg_mapping_iter prot_miter; | |
| unsigned int iter_flags; | |
| unsigned int total_len = nvmet_rw_data_len(req) + req->metadata_len; | |
| if (!nvmet_check_transfer_len(req, total_len)) | |
| return; | |
| if (!req->sg_cnt) { | |
| nvmet_req_complete(req, 0); | |
| return; | |
| } | |
| if (req->cmd->rw.opcode == nvme_cmd_write) { | |
| opf = REQ_OP_WRITE | REQ_SYNC | REQ_IDLE; | |
| if (req->cmd->rw.control & cpu_to_le16(NVME_RW_FUA)) | |
| opf |= REQ_FUA; | |
| iter_flags = SG_MITER_TO_SG; | |
| } else { | |
| opf = REQ_OP_READ; | |
| iter_flags = SG_MITER_FROM_SG; | |
| } | |
| if (req->cmd->rw.control & cpu_to_le16(NVME_RW_LR)) | |
| opf |= REQ_FAILFAST_DEV; | |
| if (is_pci_p2pdma_page(sg_page(req->sg))) | |
| opf |= REQ_NOMERGE; | |
| sector = nvmet_lba_to_sect(req->ns, req->cmd->rw.slba); | |
| if (nvmet_use_inline_bvec(req)) { | |
| bio = &req->b.inline_bio; | |
| bio_init(bio, req->ns->bdev, req->inline_bvec, | |
| ARRAY_SIZE(req->inline_bvec), opf); | |
| } else { | |
| bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt), opf, | |
| GFP_KERNEL); | |
| } | |
| bio->bi_iter.bi_sector = sector; | |
| bio->bi_private = req; | |
| bio->bi_end_io = nvmet_bio_done; | |
| blk_start_plug(&plug); | |
| if (req->metadata_len) | |
| sg_miter_start(&prot_miter, req->metadata_sg, | |
| req->metadata_sg_cnt, iter_flags); | |
| for_each_sg(req->sg, sg, req->sg_cnt, i) { | |
| while (bio_add_page(bio, sg_page(sg), sg->length, sg->offset) | |
| != sg->length) { | |
| struct bio *prev = bio; | |
| if (req->metadata_len) { | |
| rc = nvmet_bdev_alloc_bip(req, bio, | |
| &prot_miter); | |
| if (unlikely(rc)) { | |
| bio_io_error(bio); | |
| return; | |
| } | |
| } | |
| bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt), | |
| opf, GFP_KERNEL); | |
| bio->bi_iter.bi_sector = sector; | |
| bio_chain(bio, prev); | |
| submit_bio(prev); | |
| } | |
| sector += sg->length >> 9; | |
| sg_cnt--; | |
| } | |
| if (req->metadata_len) { | |
| rc = nvmet_bdev_alloc_bip(req, bio, &prot_miter); | |
| if (unlikely(rc)) { | |
| bio_io_error(bio); | |
| return; | |
| } | |
| } | |
| submit_bio(bio); | |
| blk_finish_plug(&plug); | |
| } | |
| static void nvmet_bdev_execute_flush(struct nvmet_req *req) | |
| { | |
| struct bio *bio = &req->b.inline_bio; | |
| if (!bdev_write_cache(req->ns->bdev)) { | |
| nvmet_req_complete(req, NVME_SC_SUCCESS); | |
| return; | |
| } | |
| if (!nvmet_check_transfer_len(req, 0)) | |
| return; | |
| bio_init(bio, req->ns->bdev, req->inline_bvec, | |
| ARRAY_SIZE(req->inline_bvec), REQ_OP_WRITE | REQ_PREFLUSH); | |
| bio->bi_private = req; | |
| bio->bi_end_io = nvmet_bio_done; | |
| submit_bio(bio); | |
| } | |
| u16 nvmet_bdev_flush(struct nvmet_req *req) | |
| { | |
| if (!bdev_write_cache(req->ns->bdev)) | |
| return 0; | |
| if (blkdev_issue_flush(req->ns->bdev)) | |
| return NVME_SC_INTERNAL | NVME_STATUS_DNR; | |
| return 0; | |
| } | |
| static void nvmet_bdev_execute_discard(struct nvmet_req *req) | |
| { | |
| struct nvmet_ns *ns = req->ns; | |
| struct nvme_dsm_range range; | |
| struct bio *bio = NULL; | |
| sector_t nr_sects; | |
| int i; | |
| u16 status = NVME_SC_SUCCESS; | |
| for (i = 0; i <= le32_to_cpu(req->cmd->dsm.nr); i++) { | |
| status = nvmet_copy_from_sgl(req, i * sizeof(range), &range, | |
| sizeof(range)); | |
| if (status) | |
| break; | |
| nr_sects = le32_to_cpu(range.nlb) << (ns->blksize_shift - 9); | |
| __blkdev_issue_discard(ns->bdev, | |
| nvmet_lba_to_sect(ns, range.slba), nr_sects, | |
| GFP_KERNEL, &bio); | |
| } | |
| if (bio) { | |
| bio->bi_private = req; | |
| bio->bi_end_io = nvmet_bio_done; | |
| if (status) | |
| bio_io_error(bio); | |
| else | |
| submit_bio(bio); | |
| } else { | |
| nvmet_req_complete(req, status); | |
| } | |
| } | |
| static void nvmet_bdev_execute_dsm(struct nvmet_req *req) | |
| { | |
| if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) | |
| return; | |
| switch (le32_to_cpu(req->cmd->dsm.attributes)) { | |
| case NVME_DSMGMT_AD: | |
| nvmet_bdev_execute_discard(req); | |
| return; | |
| case NVME_DSMGMT_IDR: | |
| case NVME_DSMGMT_IDW: | |
| default: | |
| /* Not supported yet */ | |
| nvmet_req_complete(req, 0); | |
| return; | |
| } | |
| } | |
| static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) | |
| { | |
| struct nvme_write_zeroes_cmd *write_zeroes = &req->cmd->write_zeroes; | |
| struct bio *bio = NULL; | |
| sector_t sector; | |
| sector_t nr_sector; | |
| int ret; | |
| if (!nvmet_check_transfer_len(req, 0)) | |
| return; | |
| sector = nvmet_lba_to_sect(req->ns, write_zeroes->slba); | |
| nr_sector = (((sector_t)le16_to_cpu(write_zeroes->length) + 1) << | |
| (req->ns->blksize_shift - 9)); | |
| ret = __blkdev_issue_zeroout(req->ns->bdev, sector, nr_sector, | |
| GFP_KERNEL, &bio, 0); | |
| if (bio) { | |
| bio->bi_private = req; | |
| bio->bi_end_io = nvmet_bio_done; | |
| submit_bio(bio); | |
| } else { | |
| nvmet_req_complete(req, errno_to_nvme_status(req, ret)); | |
| } | |
| } | |
| u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) | |
| { | |
| switch (req->cmd->common.opcode) { | |
| case nvme_cmd_read: | |
| case nvme_cmd_write: | |
| req->execute = nvmet_bdev_execute_rw; | |
| if (req->sq->ctrl->pi_support && nvmet_ns_has_pi(req->ns)) | |
| req->metadata_len = nvmet_rw_metadata_len(req); | |
| return 0; | |
| case nvme_cmd_flush: | |
| req->execute = nvmet_bdev_execute_flush; | |
| return 0; | |
| case nvme_cmd_dsm: | |
| req->execute = nvmet_bdev_execute_dsm; | |
| return 0; | |
| case nvme_cmd_write_zeroes: | |
| req->execute = nvmet_bdev_execute_write_zeroes; | |
| return 0; | |
| default: | |
| return nvmet_report_invalid_opcode(req); | |
| } | |
| } |