| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * StarFive Designware Mobile Storage Host Controller Driver | |
| * | |
| * Copyright (c) 2022 StarFive Technology Co., Ltd. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/module.h> | |
| #include <linux/of_address.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include "dw_mmc.h" | |
| #include "dw_mmc-pltfm.h" | |
| #define ALL_INT_CLR 0x1ffff | |
| #define MAX_DELAY_CHAIN 32 | |
| #define STARFIVE_SMPL_PHASE GENMASK(20, 16) | |
| static void dw_mci_starfive_set_ios(struct dw_mci *host, struct mmc_ios *ios) | |
| { | |
| int ret; | |
| unsigned int clock; | |
| if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing == MMC_TIMING_UHS_DDR50) { | |
| clock = (ios->clock > 50000000 && ios->clock <= 52000000) ? 100000000 : ios->clock; | |
| ret = clk_set_rate(host->ciu_clk, clock); | |
| if (ret) | |
| dev_dbg(host->dev, "Use an external frequency divider %uHz\n", ios->clock); | |
| host->bus_hz = clk_get_rate(host->ciu_clk); | |
| } else { | |
| dev_dbg(host->dev, "Using the internal divider\n"); | |
| } | |
| } | |
| static void dw_mci_starfive_set_sample_phase(struct dw_mci *host, u32 smpl_phase) | |
| { | |
| /* change driver phase and sample phase */ | |
| u32 reg_value = mci_readl(host, UHS_REG_EXT); | |
| /* In UHS_REG_EXT, only 5 bits valid in DRV_PHASE and SMPL_PHASE */ | |
| reg_value &= ~STARFIVE_SMPL_PHASE; | |
| reg_value |= FIELD_PREP(STARFIVE_SMPL_PHASE, smpl_phase); | |
| mci_writel(host, UHS_REG_EXT, reg_value); | |
| /* We should delay 1ms wait for timing setting finished. */ | |
| mdelay(1); | |
| } | |
| static int dw_mci_starfive_execute_tuning(struct dw_mci *host, | |
| u32 opcode) | |
| { | |
| static const int grade = MAX_DELAY_CHAIN; | |
| int smpl_phase, smpl_raise = -1, smpl_fall = -1; | |
| int ret; | |
| for (smpl_phase = 0; smpl_phase < grade; smpl_phase++) { | |
| dw_mci_starfive_set_sample_phase(host, smpl_phase); | |
| mci_writel(host, RINTSTS, ALL_INT_CLR); | |
| ret = mmc_send_tuning(host->mmc, opcode, NULL); | |
| if (!ret && smpl_raise < 0) { | |
| smpl_raise = smpl_phase; | |
| } else if (ret && smpl_raise >= 0) { | |
| smpl_fall = smpl_phase - 1; | |
| break; | |
| } | |
| } | |
| if (smpl_phase >= grade) | |
| smpl_fall = grade - 1; | |
| if (smpl_raise < 0) { | |
| smpl_phase = 0; | |
| dev_err(host->dev, "No valid delay chain! use default\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| smpl_phase = (smpl_raise + smpl_fall) / 2; | |
| dev_dbg(host->dev, "Found valid delay chain! use it [delay=%d]\n", smpl_phase); | |
| ret = 0; | |
| out: | |
| dw_mci_starfive_set_sample_phase(host, smpl_phase); | |
| mci_writel(host, RINTSTS, ALL_INT_CLR); | |
| return ret; | |
| } | |
| static const struct dw_mci_drv_data starfive_data = { | |
| .common_caps = MMC_CAP_CMD23, | |
| .set_ios = dw_mci_starfive_set_ios, | |
| .execute_tuning = dw_mci_starfive_execute_tuning, | |
| }; | |
| static const struct of_device_id dw_mci_starfive_match[] = { | |
| { .compatible = "starfive,jh7110-mmc", | |
| .data = &starfive_data }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, dw_mci_starfive_match); | |
| static int dw_mci_starfive_probe(struct platform_device *pdev) | |
| { | |
| return dw_mci_pltfm_register(pdev, &starfive_data); | |
| } | |
| static struct platform_driver dw_mci_starfive_driver = { | |
| .probe = dw_mci_starfive_probe, | |
| .remove = dw_mci_pltfm_remove, | |
| .driver = { | |
| .name = "dwmmc_starfive", | |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, | |
| .of_match_table = dw_mci_starfive_match, | |
| }, | |
| }; | |
| module_platform_driver(dw_mci_starfive_driver); | |
| MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver Extension"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:dwmmc_starfive"); |