| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * This is for all the tests related to logic bugs (e.g. bad dereferences, | |
| * bad alignment, bad loops, bad locking, bad scheduling, deep stacks, and | |
| * lockups) along with other things that don't fit well into existing LKDTM | |
| * test source files. | |
| */ | |
| #include "lkdtm.h" | |
| #include <linux/cpu.h> | |
| #include <linux/efi.h> | |
| #include <linux/list.h> | |
| #include <linux/hrtimer.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/slab.h> | |
| #include <linux/stop_machine.h> | |
| #include <linux/uaccess.h> | |
| #if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML) | |
| #include <asm/desc.h> | |
| #endif | |
| struct lkdtm_list { | |
| struct list_head node; | |
| }; | |
| /* | |
| * Make sure our attempts to over run the kernel stack doesn't trigger | |
| * a compiler warning when CONFIG_FRAME_WARN is set. Then make sure we | |
| * recurse past the end of THREAD_SIZE by default. | |
| */ | |
| #if defined(CONFIG_FRAME_WARN) && (CONFIG_FRAME_WARN > 0) | |
| #define REC_STACK_SIZE (_AC(CONFIG_FRAME_WARN, UL) / 2) | |
| #else | |
| #define REC_STACK_SIZE (THREAD_SIZE / 8UL) | |
| #endif | |
| #define REC_NUM_DEFAULT ((THREAD_SIZE / REC_STACK_SIZE) * 2) | |
| static int recur_count = REC_NUM_DEFAULT; | |
| static DEFINE_SPINLOCK(lock_me_up); | |
| /* | |
| * Make sure compiler does not optimize this function or stack frame away: | |
| * - function marked noinline | |
| * - stack variables are marked volatile | |
| * - stack variables are written (memset()) and read (buf[..] passed as arg) | |
| * - function may have external effects (memzero_explicit()) | |
| * - no tail recursion possible | |
| */ | |
| static int noinline recursive_loop(int remaining) | |
| { | |
| volatile char buf[REC_STACK_SIZE]; | |
| volatile int ret; | |
| memset((void *)buf, remaining & 0xFF, sizeof(buf)); | |
| if (!remaining) | |
| ret = 0; | |
| else | |
| ret = recursive_loop((int)buf[remaining % sizeof(buf)] - 1); | |
| memzero_explicit((void *)buf, sizeof(buf)); | |
| return ret; | |
| } | |
| /* If the depth is negative, use the default, otherwise keep parameter. */ | |
| void __init lkdtm_bugs_init(int *recur_param) | |
| { | |
| if (*recur_param < 0) | |
| *recur_param = recur_count; | |
| else | |
| recur_count = *recur_param; | |
| } | |
| static void lkdtm_PANIC(void) | |
| { | |
| panic("dumptest"); | |
| } | |
| static int panic_stop_irqoff_fn(void *arg) | |
| { | |
| atomic_t *v = arg; | |
| /* | |
| * As stop_machine() disables interrupts, all CPUs within this function | |
| * have interrupts disabled and cannot take a regular IPI. | |
| * | |
| * The last CPU which enters here will trigger a panic, and as all CPUs | |
| * cannot take a regular IPI, we'll only be able to stop secondaries if | |
| * smp_send_stop() or crash_smp_send_stop() uses an NMI. | |
| */ | |
| if (atomic_inc_return(v) == num_online_cpus()) | |
| panic("panic stop irqoff test"); | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| static void lkdtm_PANIC_STOP_IRQOFF(void) | |
| { | |
| atomic_t v = ATOMIC_INIT(0); | |
| stop_machine(panic_stop_irqoff_fn, &v, cpu_online_mask); | |
| } | |
| static bool wait_for_panic; | |
| static enum hrtimer_restart panic_in_hardirq(struct hrtimer *timer) | |
| { | |
| panic("from hard IRQ context"); | |
| wait_for_panic = false; | |
| return HRTIMER_NORESTART; | |
| } | |
| static void lkdtm_PANIC_IN_HARDIRQ(void) | |
| { | |
| struct hrtimer timer; | |
| wait_for_panic = true; | |
| hrtimer_setup_on_stack(&timer, panic_in_hardirq, | |
| CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD); | |
| hrtimer_start(&timer, us_to_ktime(100), HRTIMER_MODE_REL_HARD); | |
| while (READ_ONCE(wait_for_panic)) | |
| cpu_relax(); | |
| hrtimer_cancel(&timer); | |
| } | |
| static void lkdtm_BUG(void) | |
| { | |
| BUG(); | |
| } | |
| static bool wait_for_bug; | |
| static enum hrtimer_restart bug_in_hardirq(struct hrtimer *timer) | |
| { | |
| BUG(); | |
| wait_for_bug = false; | |
| return HRTIMER_NORESTART; | |
| } | |
| static void lkdtm_BUG_IN_HARDIRQ(void) | |
| { | |
| struct hrtimer timer; | |
| wait_for_bug = true; | |
| hrtimer_setup_on_stack(&timer, bug_in_hardirq, | |
| CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD); | |
| hrtimer_start(&timer, us_to_ktime(100), HRTIMER_MODE_REL_HARD); | |
| while (READ_ONCE(wait_for_bug)) | |
| cpu_relax(); | |
| hrtimer_cancel(&timer); | |
| } | |
| static int warn_counter; | |
| static void lkdtm_WARNING(void) | |
| { | |
| WARN_ON(++warn_counter); | |
| } | |
| static void lkdtm_WARNING_MESSAGE(void) | |
| { | |
| WARN(1, "Warning message trigger count: %d\n", ++warn_counter); | |
| } | |
| static void lkdtm_EXCEPTION(void) | |
| { | |
| *((volatile int *) 0) = 0; | |
| } | |
| static void lkdtm_LOOP(void) | |
| { | |
| for (;;) | |
| ; | |
| } | |
| static void lkdtm_EXHAUST_STACK(void) | |
| { | |
| pr_info("Calling function with %lu frame size to depth %d ...\n", | |
| REC_STACK_SIZE, recur_count); | |
| recursive_loop(recur_count); | |
| pr_info("FAIL: survived without exhausting stack?!\n"); | |
| } | |
| static noinline void __lkdtm_CORRUPT_STACK(void *stack) | |
| { | |
| memset(stack, '\xff', 64); | |
| } | |
| /* This should trip the stack canary, not corrupt the return address. */ | |
| static noinline void lkdtm_CORRUPT_STACK(void) | |
| { | |
| /* Use default char array length that triggers stack protection. */ | |
| char data[8] __aligned(sizeof(void *)); | |
| pr_info("Corrupting stack containing char array ...\n"); | |
| __lkdtm_CORRUPT_STACK((void *)&data); | |
| } | |
| /* Same as above but will only get a canary with -fstack-protector-strong */ | |
| static noinline void lkdtm_CORRUPT_STACK_STRONG(void) | |
| { | |
| union { | |
| unsigned short shorts[4]; | |
| unsigned long *ptr; | |
| } data __aligned(sizeof(void *)); | |
| pr_info("Corrupting stack containing union ...\n"); | |
| __lkdtm_CORRUPT_STACK((void *)&data); | |
| } | |
| static pid_t stack_pid; | |
| static unsigned long stack_addr; | |
| static void lkdtm_REPORT_STACK(void) | |
| { | |
| volatile uintptr_t magic; | |
| pid_t pid = task_pid_nr(current); | |
| if (pid != stack_pid) { | |
| pr_info("Starting stack offset tracking for pid %d\n", pid); | |
| stack_pid = pid; | |
| stack_addr = (uintptr_t)&magic; | |
| } | |
| pr_info("Stack offset: %d\n", (int)(stack_addr - (uintptr_t)&magic)); | |
| } | |
| static pid_t stack_canary_pid; | |
| static unsigned long stack_canary; | |
| static unsigned long stack_canary_offset; | |
| static noinline void __lkdtm_REPORT_STACK_CANARY(void *stack) | |
| { | |
| int i = 0; | |
| pid_t pid = task_pid_nr(current); | |
| unsigned long *canary = (unsigned long *)stack; | |
| unsigned long current_offset = 0, init_offset = 0; | |
| /* Do our best to find the canary in a 16 word window ... */ | |
| for (i = 1; i < 16; i++) { | |
| canary = (unsigned long *)stack + i; | |
| #ifdef CONFIG_STACKPROTECTOR | |
| if (*canary == current->stack_canary) | |
| current_offset = i; | |
| if (*canary == init_task.stack_canary) | |
| init_offset = i; | |
| #endif | |
| } | |
| if (current_offset == 0) { | |
| /* | |
| * If the canary doesn't match what's in the task_struct, | |
| * we're either using a global canary or the stack frame | |
| * layout changed. | |
| */ | |
| if (init_offset != 0) { | |
| pr_err("FAIL: global stack canary found at offset %ld (canary for pid %d matches init_task's)!\n", | |
| init_offset, pid); | |
| } else { | |
| pr_warn("FAIL: did not correctly locate stack canary :(\n"); | |
| pr_expected_config(CONFIG_STACKPROTECTOR); | |
| } | |
| return; | |
| } else if (init_offset != 0) { | |
| pr_warn("WARNING: found both current and init_task canaries nearby?!\n"); | |
| } | |
| canary = (unsigned long *)stack + current_offset; | |
| if (stack_canary_pid == 0) { | |
| stack_canary = *canary; | |
| stack_canary_pid = pid; | |
| stack_canary_offset = current_offset; | |
| pr_info("Recorded stack canary for pid %d at offset %ld\n", | |
| stack_canary_pid, stack_canary_offset); | |
| } else if (pid == stack_canary_pid) { | |
| pr_warn("ERROR: saw pid %d again -- please use a new pid\n", pid); | |
| } else { | |
| if (current_offset != stack_canary_offset) { | |
| pr_warn("ERROR: canary offset changed from %ld to %ld!?\n", | |
| stack_canary_offset, current_offset); | |
| return; | |
| } | |
| if (*canary == stack_canary) { | |
| pr_warn("FAIL: canary identical for pid %d and pid %d at offset %ld!\n", | |
| stack_canary_pid, pid, current_offset); | |
| } else { | |
| pr_info("ok: stack canaries differ between pid %d and pid %d at offset %ld.\n", | |
| stack_canary_pid, pid, current_offset); | |
| /* Reset the test. */ | |
| stack_canary_pid = 0; | |
| } | |
| } | |
| } | |
| static void lkdtm_REPORT_STACK_CANARY(void) | |
| { | |
| /* Use default char array length that triggers stack protection. */ | |
| char data[8] __aligned(sizeof(void *)) = { }; | |
| __lkdtm_REPORT_STACK_CANARY((void *)&data); | |
| } | |
| static void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void) | |
| { | |
| static u8 data[5] __attribute__((aligned(4))) = {1, 2, 3, 4, 5}; | |
| u32 *p; | |
| u32 val = 0x12345678; | |
| p = (u32 *)(data + 1); | |
| if (*p == 0) | |
| val = 0x87654321; | |
| *p = val; | |
| if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)) | |
| pr_err("XFAIL: arch has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS\n"); | |
| } | |
| static void lkdtm_SOFTLOCKUP(void) | |
| { | |
| preempt_disable(); | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| static void lkdtm_HARDLOCKUP(void) | |
| { | |
| local_irq_disable(); | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| static void __lkdtm_SMP_CALL_LOCKUP(void *unused) | |
| { | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| static void lkdtm_SMP_CALL_LOCKUP(void) | |
| { | |
| unsigned int cpu, target; | |
| cpus_read_lock(); | |
| cpu = get_cpu(); | |
| target = cpumask_any_but(cpu_online_mask, cpu); | |
| if (target >= nr_cpu_ids) { | |
| pr_err("FAIL: no other online CPUs\n"); | |
| goto out_put_cpus; | |
| } | |
| smp_call_function_single(target, __lkdtm_SMP_CALL_LOCKUP, NULL, 1); | |
| pr_err("FAIL: did not hang\n"); | |
| out_put_cpus: | |
| put_cpu(); | |
| cpus_read_unlock(); | |
| } | |
| static void lkdtm_SPINLOCKUP(void) | |
| { | |
| /* Must be called twice to trigger. */ | |
| spin_lock(&lock_me_up); | |
| /* Let sparse know we intended to exit holding the lock. */ | |
| __release(&lock_me_up); | |
| } | |
| static void __noreturn lkdtm_HUNG_TASK(void) | |
| { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| schedule(); | |
| BUG(); | |
| } | |
| static volatile unsigned int huge = INT_MAX - 2; | |
| static volatile unsigned int ignored; | |
| static void lkdtm_OVERFLOW_SIGNED(void) | |
| { | |
| int value; | |
| value = huge; | |
| pr_info("Normal signed addition ...\n"); | |
| value += 1; | |
| ignored = value; | |
| pr_info("Overflowing signed addition ...\n"); | |
| value += 4; | |
| ignored = value; | |
| } | |
| static void lkdtm_OVERFLOW_UNSIGNED(void) | |
| { | |
| unsigned int value; | |
| value = huge; | |
| pr_info("Normal unsigned addition ...\n"); | |
| value += 1; | |
| ignored = value; | |
| pr_info("Overflowing unsigned addition ...\n"); | |
| value += 4; | |
| ignored = value; | |
| } | |
| /* Intentionally using unannotated flex array definition. */ | |
| struct array_bounds_flex_array { | |
| int one; | |
| int two; | |
| char data[]; | |
| }; | |
| struct array_bounds { | |
| int one; | |
| int two; | |
| char data[8]; | |
| int three; | |
| }; | |
| static void lkdtm_ARRAY_BOUNDS(void) | |
| { | |
| struct array_bounds_flex_array *not_checked; | |
| struct array_bounds *checked; | |
| volatile int i; | |
| not_checked = kmalloc(sizeof(*not_checked) * 2, GFP_KERNEL); | |
| checked = kmalloc(sizeof(*checked) * 2, GFP_KERNEL); | |
| if (!not_checked || !checked) { | |
| kfree(not_checked); | |
| kfree(checked); | |
| return; | |
| } | |
| pr_info("Array access within bounds ...\n"); | |
| /* For both, touch all bytes in the actual member size. */ | |
| for (i = 0; i < sizeof(checked->data); i++) | |
| checked->data[i] = 'A'; | |
| /* | |
| * For the uninstrumented flex array member, also touch 1 byte | |
| * beyond to verify it is correctly uninstrumented. | |
| */ | |
| for (i = 0; i < 2; i++) | |
| not_checked->data[i] = 'A'; | |
| pr_info("Array access beyond bounds ...\n"); | |
| for (i = 0; i < sizeof(checked->data) + 1; i++) | |
| checked->data[i] = 'B'; | |
| kfree(not_checked); | |
| kfree(checked); | |
| pr_err("FAIL: survived array bounds overflow!\n"); | |
| if (IS_ENABLED(CONFIG_UBSAN_BOUNDS)) | |
| pr_expected_config(CONFIG_UBSAN_TRAP); | |
| else | |
| pr_expected_config(CONFIG_UBSAN_BOUNDS); | |
| } | |
| struct lkdtm_cb_fam { | |
| unsigned long flags; | |
| int count; | |
| int array[] __counted_by(count); | |
| }; | |
| static volatile int element_count = 4; | |
| static void lkdtm_FAM_BOUNDS(void) | |
| { | |
| struct lkdtm_cb_fam *inst; | |
| inst = kzalloc_flex(*inst, array, element_count + 1); | |
| if (!inst) { | |
| pr_err("FAIL: could not allocate test struct!\n"); | |
| return; | |
| } | |
| inst->count = element_count; | |
| pr_info("Array access within bounds ...\n"); | |
| inst->array[1] = element_count; | |
| ignored = inst->array[1]; | |
| pr_info("Array access beyond bounds ...\n"); | |
| inst->array[element_count] = element_count; | |
| ignored = inst->array[element_count]; | |
| kfree(inst); | |
| pr_err("FAIL: survived access of invalid flexible array member index!\n"); | |
| if (!IS_ENABLED(CONFIG_CC_HAS_COUNTED_BY)) | |
| pr_warn("This is expected since this %s was built with a compiler that does not support __counted_by\n", | |
| lkdtm_kernel_info); | |
| else if (IS_ENABLED(CONFIG_UBSAN_BOUNDS)) | |
| pr_expected_config(CONFIG_UBSAN_TRAP); | |
| else | |
| pr_expected_config(CONFIG_UBSAN_BOUNDS); | |
| } | |
| struct lkdtm_extra { | |
| short a, b; | |
| u16 sixteen; | |
| u32 bigger; | |
| u64 biggest; | |
| }; | |
| struct lkdtm_cb_ptr { | |
| int a, b, c; | |
| int nr_extra; | |
| char *buf __counted_by_ptr(len); | |
| size_t len; | |
| struct lkdtm_extra *extra __counted_by_ptr(nr_extra); | |
| }; | |
| static noinline void check_ptr_len(struct lkdtm_cb_ptr *p, size_t len) | |
| { | |
| if (__member_size(p->buf) != len) | |
| pr_err("FAIL: could not determine size of inst->buf: %zu\n", | |
| __member_size(p->buf)); | |
| else | |
| pr_info("good: inst->buf length is %zu\n", len); | |
| } | |
| static void lkdtm_PTR_BOUNDS(void) | |
| { | |
| struct lkdtm_cb_ptr *inst; | |
| inst = kzalloc_obj(*inst); | |
| if (!inst) { | |
| pr_err("FAIL: could not allocate struct lkdtm_cb_ptr!\n"); | |
| return; | |
| } | |
| inst->buf = kzalloc(element_count, GFP_KERNEL); | |
| if (!inst->buf) { | |
| pr_err("FAIL: could not allocate inst->buf!\n"); | |
| return; | |
| } | |
| inst->len = element_count; | |
| /* Double element_count */ | |
| inst->extra = kzalloc_objs(*inst->extra, element_count * 2); | |
| inst->nr_extra = element_count * 2; | |
| pr_info("Pointer access within bounds ...\n"); | |
| check_ptr_len(inst, 4); | |
| /* All 4 bytes */ | |
| inst->buf[0] = 'A'; | |
| inst->buf[1] = 'B'; | |
| inst->buf[2] = 'C'; | |
| inst->buf[3] = 'D'; | |
| /* Halfway into the array */ | |
| inst->extra[element_count].biggest = 0x1000; | |
| pr_info("Pointer access beyond bounds ...\n"); | |
| ignored = inst->extra[inst->nr_extra].b; | |
| kfree(inst->extra); | |
| kfree(inst->buf); | |
| kfree(inst); | |
| pr_err("FAIL: survived access of invalid pointer member offset!\n"); | |
| if (!IS_ENABLED(CONFIG_CC_HAS_COUNTED_BY_PTR)) | |
| pr_warn("This is expected since this %s was built with a compiler that does not support __counted_by_ptr\n", | |
| lkdtm_kernel_info); | |
| else if (IS_ENABLED(CONFIG_UBSAN_BOUNDS)) | |
| pr_expected_config(CONFIG_UBSAN_TRAP); | |
| else | |
| pr_expected_config(CONFIG_UBSAN_BOUNDS); | |
| } | |
| static void lkdtm_CORRUPT_LIST_ADD(void) | |
| { | |
| /* | |
| * Initially, an empty list via LIST_HEAD: | |
| * test_head.next = &test_head | |
| * test_head.prev = &test_head | |
| */ | |
| LIST_HEAD(test_head); | |
| struct lkdtm_list good, bad; | |
| void *target[2] = { }; | |
| void *redirection = ⌖ | |
| pr_info("attempting good list addition\n"); | |
| /* | |
| * Adding to the list performs these actions: | |
| * test_head.next->prev = &good.node | |
| * good.node.next = test_head.next | |
| * good.node.prev = test_head | |
| * test_head.next = good.node | |
| */ | |
| list_add(&good.node, &test_head); | |
| pr_info("attempting corrupted list addition\n"); | |
| /* | |
| * In simulating this "write what where" primitive, the "what" is | |
| * the address of &bad.node, and the "where" is the address held | |
| * by "redirection". | |
| */ | |
| test_head.next = redirection; | |
| list_add(&bad.node, &test_head); | |
| if (target[0] == NULL && target[1] == NULL) | |
| pr_err("Overwrite did not happen, but no BUG?!\n"); | |
| else { | |
| pr_err("list_add() corruption not detected!\n"); | |
| pr_expected_config(CONFIG_LIST_HARDENED); | |
| } | |
| } | |
| static void lkdtm_CORRUPT_LIST_DEL(void) | |
| { | |
| LIST_HEAD(test_head); | |
| struct lkdtm_list item; | |
| void *target[2] = { }; | |
| void *redirection = ⌖ | |
| list_add(&item.node, &test_head); | |
| pr_info("attempting good list removal\n"); | |
| list_del(&item.node); | |
| pr_info("attempting corrupted list removal\n"); | |
| list_add(&item.node, &test_head); | |
| /* As with the list_add() test above, this corrupts "next". */ | |
| item.node.next = redirection; | |
| list_del(&item.node); | |
| if (target[0] == NULL && target[1] == NULL) | |
| pr_err("Overwrite did not happen, but no BUG?!\n"); | |
| else { | |
| pr_err("list_del() corruption not detected!\n"); | |
| pr_expected_config(CONFIG_LIST_HARDENED); | |
| } | |
| } | |
| /* Test that VMAP_STACK is actually allocating with a leading guard page */ | |
| static void lkdtm_STACK_GUARD_PAGE_LEADING(void) | |
| { | |
| const unsigned char *stack = task_stack_page(current); | |
| const unsigned char *ptr = stack - 1; | |
| volatile unsigned char byte; | |
| pr_info("attempting bad read from page below current stack\n"); | |
| byte = *ptr; | |
| pr_err("FAIL: accessed page before stack! (byte: %x)\n", byte); | |
| } | |
| /* Test that VMAP_STACK is actually allocating with a trailing guard page */ | |
| static void lkdtm_STACK_GUARD_PAGE_TRAILING(void) | |
| { | |
| const unsigned char *stack = task_stack_page(current); | |
| const unsigned char *ptr = stack + THREAD_SIZE; | |
| volatile unsigned char byte; | |
| pr_info("attempting bad read from page above current stack\n"); | |
| byte = *ptr; | |
| pr_err("FAIL: accessed page after stack! (byte: %x)\n", byte); | |
| } | |
| static void lkdtm_UNSET_SMEP(void) | |
| { | |
| #if IS_ENABLED(CONFIG_X86_64) && !IS_ENABLED(CONFIG_UML) | |
| #define MOV_CR4_DEPTH 64 | |
| void (*direct_write_cr4)(unsigned long val); | |
| unsigned char *insn; | |
| unsigned long cr4; | |
| int i; | |
| cr4 = native_read_cr4(); | |
| if ((cr4 & X86_CR4_SMEP) != X86_CR4_SMEP) { | |
| pr_err("FAIL: SMEP not in use\n"); | |
| return; | |
| } | |
| cr4 &= ~(X86_CR4_SMEP); | |
| pr_info("trying to clear SMEP normally\n"); | |
| native_write_cr4(cr4); | |
| if (cr4 == native_read_cr4()) { | |
| pr_err("FAIL: pinning SMEP failed!\n"); | |
| cr4 |= X86_CR4_SMEP; | |
| pr_info("restoring SMEP\n"); | |
| native_write_cr4(cr4); | |
| return; | |
| } | |
| pr_info("ok: SMEP did not get cleared\n"); | |
| /* | |
| * To test the post-write pinning verification we need to call | |
| * directly into the middle of native_write_cr4() where the | |
| * cr4 write happens, skipping any pinning. This searches for | |
| * the cr4 writing instruction. | |
| */ | |
| insn = (unsigned char *)native_write_cr4; | |
| OPTIMIZER_HIDE_VAR(insn); | |
| for (i = 0; i < MOV_CR4_DEPTH; i++) { | |
| /* mov %rdi, %cr4 */ | |
| if (insn[i] == 0x0f && insn[i+1] == 0x22 && insn[i+2] == 0xe7) | |
| break; | |
| /* mov %rdi,%rax; mov %rax, %cr4 */ | |
| if (insn[i] == 0x48 && insn[i+1] == 0x89 && | |
| insn[i+2] == 0xf8 && insn[i+3] == 0x0f && | |
| insn[i+4] == 0x22 && insn[i+5] == 0xe0) | |
| break; | |
| } | |
| if (i >= MOV_CR4_DEPTH) { | |
| pr_info("ok: cannot locate cr4 writing call gadget\n"); | |
| return; | |
| } | |
| direct_write_cr4 = (void *)(insn + i); | |
| pr_info("trying to clear SMEP with call gadget\n"); | |
| direct_write_cr4(cr4); | |
| if (native_read_cr4() & X86_CR4_SMEP) { | |
| pr_info("ok: SMEP removal was reverted\n"); | |
| } else { | |
| pr_err("FAIL: cleared SMEP not detected!\n"); | |
| cr4 |= X86_CR4_SMEP; | |
| pr_info("restoring SMEP\n"); | |
| native_write_cr4(cr4); | |
| } | |
| #else | |
| pr_err("XFAIL: this test is x86_64-only\n"); | |
| #endif | |
| } | |
| static void lkdtm_DOUBLE_FAULT(void) | |
| { | |
| #if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML) | |
| /* | |
| * Trigger #DF by setting the stack limit to zero. This clobbers | |
| * a GDT TLS slot, which is okay because the current task will die | |
| * anyway due to the double fault. | |
| */ | |
| struct desc_struct d = { | |
| .type = 3, /* expand-up, writable, accessed data */ | |
| .p = 1, /* present */ | |
| .d = 1, /* 32-bit */ | |
| .g = 0, /* limit in bytes */ | |
| .s = 1, /* not system */ | |
| }; | |
| local_irq_disable(); | |
| write_gdt_entry(get_cpu_gdt_rw(smp_processor_id()), | |
| GDT_ENTRY_TLS_MIN, &d, DESCTYPE_S); | |
| /* | |
| * Put our zero-limit segment in SS and then trigger a fault. The | |
| * 4-byte access to (%esp) will fault with #SS, and the attempt to | |
| * deliver the fault will recursively cause #SS and result in #DF. | |
| * This whole process happens while NMIs and MCEs are blocked by the | |
| * MOV SS window. This is nice because an NMI with an invalid SS | |
| * would also double-fault, resulting in the NMI or MCE being lost. | |
| */ | |
| asm volatile ("movw %0, %%ss; addl $0, (%%esp)" :: | |
| "r" ((unsigned short)(GDT_ENTRY_TLS_MIN << 3))); | |
| pr_err("FAIL: tried to double fault but didn't die\n"); | |
| #else | |
| pr_err("XFAIL: this test is ia32-only\n"); | |
| #endif | |
| } | |
| #ifdef CONFIG_ARM64 | |
| static noinline void change_pac_parameters(void) | |
| { | |
| if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL)) { | |
| /* Reset the keys of current task */ | |
| ptrauth_thread_init_kernel(current); | |
| ptrauth_thread_switch_kernel(current); | |
| } | |
| } | |
| #endif | |
| static noinline void lkdtm_CORRUPT_PAC(void) | |
| { | |
| #ifdef CONFIG_ARM64 | |
| #define CORRUPT_PAC_ITERATE 10 | |
| int i; | |
| if (!IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL)) | |
| pr_err("FAIL: kernel not built with CONFIG_ARM64_PTR_AUTH_KERNEL\n"); | |
| if (!system_supports_address_auth()) { | |
| pr_err("FAIL: CPU lacks pointer authentication feature\n"); | |
| return; | |
| } | |
| pr_info("changing PAC parameters to force function return failure...\n"); | |
| /* | |
| * PAC is a hash value computed from input keys, return address and | |
| * stack pointer. As pac has fewer bits so there is a chance of | |
| * collision, so iterate few times to reduce the collision probability. | |
| */ | |
| for (i = 0; i < CORRUPT_PAC_ITERATE; i++) | |
| change_pac_parameters(); | |
| pr_err("FAIL: survived PAC changes! Kernel may be unstable from here\n"); | |
| #else | |
| pr_err("XFAIL: this test is arm64-only\n"); | |
| #endif | |
| } | |
| static void __maybe_unused lkdtm_EFI_RUNTIME_CRASH(void) | |
| { | |
| static unsigned long size __ro_after_init = sizeof(efi_char16_t); | |
| efi_status_t status; | |
| if (!efi.get_next_variable || | |
| !efi_enabled(EFI_RUNTIME_SERVICES) || | |
| !efi_rt_services_supported(EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) { | |
| pr_err("FAIL: EFI GetNextVariableName() is not available\n"); | |
| return; | |
| } | |
| /* | |
| * Provoke a fault by asking the firmware to write to a read-only | |
| * variable. | |
| */ | |
| status = efi.get_next_variable(&size, L"", &(efi_guid_t){}); | |
| if (status != EFI_ABORTED || efi_enabled(EFI_RUNTIME_SERVICES)) | |
| pr_err("FAIL: EFI GetNextVariable() did not abort (%#lx)\n", | |
| status); | |
| } | |
| static struct crashtype crashtypes[] = { | |
| CRASHTYPE(PANIC), | |
| CRASHTYPE(PANIC_STOP_IRQOFF), | |
| CRASHTYPE(PANIC_IN_HARDIRQ), | |
| CRASHTYPE(BUG), | |
| CRASHTYPE(BUG_IN_HARDIRQ), | |
| CRASHTYPE(WARNING), | |
| CRASHTYPE(WARNING_MESSAGE), | |
| CRASHTYPE(EXCEPTION), | |
| CRASHTYPE(LOOP), | |
| CRASHTYPE(EXHAUST_STACK), | |
| CRASHTYPE(CORRUPT_STACK), | |
| CRASHTYPE(CORRUPT_STACK_STRONG), | |
| CRASHTYPE(REPORT_STACK), | |
| CRASHTYPE(REPORT_STACK_CANARY), | |
| CRASHTYPE(UNALIGNED_LOAD_STORE_WRITE), | |
| CRASHTYPE(SOFTLOCKUP), | |
| CRASHTYPE(HARDLOCKUP), | |
| CRASHTYPE(SMP_CALL_LOCKUP), | |
| CRASHTYPE(SPINLOCKUP), | |
| CRASHTYPE(HUNG_TASK), | |
| CRASHTYPE(OVERFLOW_SIGNED), | |
| CRASHTYPE(OVERFLOW_UNSIGNED), | |
| CRASHTYPE(ARRAY_BOUNDS), | |
| CRASHTYPE(FAM_BOUNDS), | |
| CRASHTYPE(PTR_BOUNDS), | |
| CRASHTYPE(CORRUPT_LIST_ADD), | |
| CRASHTYPE(CORRUPT_LIST_DEL), | |
| CRASHTYPE(STACK_GUARD_PAGE_LEADING), | |
| CRASHTYPE(STACK_GUARD_PAGE_TRAILING), | |
| CRASHTYPE(UNSET_SMEP), | |
| CRASHTYPE(DOUBLE_FAULT), | |
| CRASHTYPE(CORRUPT_PAC), | |
| #ifdef CONFIG_EFI | |
| CRASHTYPE(EFI_RUNTIME_CRASH), | |
| #endif | |
| }; | |
| struct crashtype_category bugs_crashtypes = { | |
| .crashtypes = crashtypes, | |
| .len = ARRAY_SIZE(crashtypes), | |
| }; |