| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright 2018-2020 Broadcom. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/fs.h> | |
| #include <linux/hash.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/overflow.h> | |
| #include <linux/poll.h> | |
| #include <linux/sizes.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/timer.h> | |
| #include "bcm_vk.h" | |
| #include "bcm_vk_msg.h" | |
| #include "bcm_vk_sg.h" | |
| /* functions to manipulate the transport id in msg block */ | |
| #define BCM_VK_MSG_Q_SHIFT 4 | |
| #define BCM_VK_MSG_Q_MASK 0xF | |
| #define BCM_VK_MSG_ID_MASK 0xFFF | |
| #define BCM_VK_DMA_DRAIN_MAX_MS 2000 | |
| /* number x q_size will be the max number of msg processed per loop */ | |
| #define BCM_VK_MSG_PROC_MAX_LOOP 2 | |
| /* module parameter */ | |
| static bool hb_mon = true; | |
| module_param(hb_mon, bool, 0444); | |
| MODULE_PARM_DESC(hb_mon, "Monitoring heartbeat continuously.\n"); | |
| static int batch_log = 1; | |
| module_param(batch_log, int, 0444); | |
| MODULE_PARM_DESC(batch_log, "Max num of logs per batch operation.\n"); | |
| static bool hb_mon_is_on(void) | |
| { | |
| return hb_mon; | |
| } | |
| static u32 get_q_num(const struct vk_msg_blk *msg) | |
| { | |
| u32 q_num = msg->trans_id & BCM_VK_MSG_Q_MASK; | |
| if (q_num >= VK_MSGQ_PER_CHAN_MAX) | |
| q_num = VK_MSGQ_NUM_DEFAULT; | |
| return q_num; | |
| } | |
| static void set_q_num(struct vk_msg_blk *msg, u32 q_num) | |
| { | |
| u32 trans_q; | |
| if (q_num >= VK_MSGQ_PER_CHAN_MAX) | |
| trans_q = VK_MSGQ_NUM_DEFAULT; | |
| else | |
| trans_q = q_num; | |
| msg->trans_id = (msg->trans_id & ~BCM_VK_MSG_Q_MASK) | trans_q; | |
| } | |
| static u32 get_msg_id(const struct vk_msg_blk *msg) | |
| { | |
| return ((msg->trans_id >> BCM_VK_MSG_Q_SHIFT) & BCM_VK_MSG_ID_MASK); | |
| } | |
| static void set_msg_id(struct vk_msg_blk *msg, u32 val) | |
| { | |
| msg->trans_id = (val << BCM_VK_MSG_Q_SHIFT) | get_q_num(msg); | |
| } | |
| static u32 msgq_inc(const struct bcm_vk_sync_qinfo *qinfo, u32 idx, u32 inc) | |
| { | |
| return ((idx + inc) & qinfo->q_mask); | |
| } | |
| static | |
| struct vk_msg_blk __iomem *msgq_blk_addr(const struct bcm_vk_sync_qinfo *qinfo, | |
| u32 idx) | |
| { | |
| return qinfo->q_start + (VK_MSGQ_BLK_SIZE * idx); | |
| } | |
| static u32 msgq_occupied(const struct bcm_vk_msgq __iomem *msgq, | |
| const struct bcm_vk_sync_qinfo *qinfo) | |
| { | |
| u32 wr_idx, rd_idx; | |
| wr_idx = readl_relaxed(&msgq->wr_idx); | |
| rd_idx = readl_relaxed(&msgq->rd_idx); | |
| return ((wr_idx - rd_idx) & qinfo->q_mask); | |
| } | |
| static | |
| u32 msgq_avail_space(const struct bcm_vk_msgq __iomem *msgq, | |
| const struct bcm_vk_sync_qinfo *qinfo) | |
| { | |
| return (qinfo->q_size - msgq_occupied(msgq, qinfo) - 1); | |
| } | |
| /* number of retries when enqueue message fails before returning EAGAIN */ | |
| #define BCM_VK_H2VK_ENQ_RETRY 10 | |
| #define BCM_VK_H2VK_ENQ_RETRY_DELAY_MS 50 | |
| bool bcm_vk_drv_access_ok(struct bcm_vk *vk) | |
| { | |
| /* Pair with the release store after message queue initialization. */ | |
| return !!atomic_read_acquire(&vk->msgq_inited); | |
| } | |
| void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask) | |
| { | |
| struct bcm_vk_alert *alert = &vk->host_alert; | |
| unsigned long flags; | |
| /* use irqsave version as this maybe called inside timer interrupt */ | |
| spin_lock_irqsave(&vk->host_alert_lock, flags); | |
| alert->notfs |= bit_mask; | |
| spin_unlock_irqrestore(&vk->host_alert_lock, flags); | |
| if (test_and_set_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload) == 0) | |
| queue_work(vk->wq_thread, &vk->wq_work); | |
| } | |
| /* | |
| * Heartbeat related defines | |
| * The heartbeat from host is a last resort. If stuck condition happens | |
| * on the card, firmware is supposed to detect it. Therefore, the heartbeat | |
| * values used will be more relaxed on the driver, which need to be bigger | |
| * than the watchdog timeout on the card. The watchdog timeout on the card | |
| * is 20s, with a jitter of 2s => 22s. We use a value of 27s here. | |
| */ | |
| #define BCM_VK_HB_TIMER_S 3 | |
| #define BCM_VK_HB_TIMER_VALUE (BCM_VK_HB_TIMER_S * HZ) | |
| #define BCM_VK_HB_LOST_MAX (27 / BCM_VK_HB_TIMER_S) | |
| static void bcm_vk_hb_poll(struct work_struct *work) | |
| { | |
| u32 uptime_s; | |
| struct bcm_vk_hb_ctrl *hb = container_of(to_delayed_work(work), struct bcm_vk_hb_ctrl, | |
| work); | |
| struct bcm_vk *vk = container_of(hb, struct bcm_vk, hb_ctrl); | |
| if (bcm_vk_drv_access_ok(vk) && hb_mon_is_on()) { | |
| /* read uptime from register and compare */ | |
| uptime_s = vkread32(vk, BAR_0, BAR_OS_UPTIME); | |
| if (uptime_s == hb->last_uptime) | |
| hb->lost_cnt++; | |
| else /* reset to avoid accumulation */ | |
| hb->lost_cnt = 0; | |
| dev_dbg(&vk->pdev->dev, "Last uptime %d current %d, lost %d\n", | |
| hb->last_uptime, uptime_s, hb->lost_cnt); | |
| /* | |
| * if the interface goes down without any activity, a value | |
| * of 0xFFFFFFFF will be continuously read, and the detection | |
| * will be happened eventually. | |
| */ | |
| hb->last_uptime = uptime_s; | |
| } else { | |
| /* reset heart beat lost cnt */ | |
| hb->lost_cnt = 0; | |
| } | |
| /* next, check if heartbeat exceeds limit */ | |
| if (hb->lost_cnt > BCM_VK_HB_LOST_MAX) { | |
| dev_err(&vk->pdev->dev, "Heartbeat Misses %d times, %d s!\n", | |
| BCM_VK_HB_LOST_MAX, | |
| BCM_VK_HB_LOST_MAX * BCM_VK_HB_TIMER_S); | |
| bcm_vk_blk_drv_access(vk); | |
| bcm_vk_set_host_alert(vk, ERR_LOG_HOST_HB_FAIL); | |
| } | |
| /* re-arm timer */ | |
| schedule_delayed_work(&hb->work, BCM_VK_HB_TIMER_VALUE); | |
| } | |
| void bcm_vk_hb_init(struct bcm_vk *vk) | |
| { | |
| struct bcm_vk_hb_ctrl *hb = &vk->hb_ctrl; | |
| INIT_DELAYED_WORK(&hb->work, bcm_vk_hb_poll); | |
| schedule_delayed_work(&hb->work, BCM_VK_HB_TIMER_VALUE); | |
| } | |
| void bcm_vk_hb_deinit(struct bcm_vk *vk) | |
| { | |
| struct bcm_vk_hb_ctrl *hb = &vk->hb_ctrl; | |
| cancel_delayed_work_sync(&hb->work); | |
| } | |
| static void bcm_vk_msgid_bitmap_clear(struct bcm_vk *vk, | |
| unsigned int start, | |
| unsigned int nbits) | |
| { | |
| spin_lock(&vk->msg_id_lock); | |
| bitmap_clear(vk->bmap, start, nbits); | |
| spin_unlock(&vk->msg_id_lock); | |
| } | |
| /* | |
| * allocate a ctx per file struct | |
| */ | |
| static struct bcm_vk_ctx *bcm_vk_get_ctx(struct bcm_vk *vk, const pid_t pid) | |
| { | |
| u32 i; | |
| struct bcm_vk_ctx *ctx = NULL; | |
| u32 hash_idx = hash_32(pid, VK_PID_HT_SHIFT_BIT); | |
| spin_lock(&vk->ctx_lock); | |
| /* check if it is in reset, if so, don't allow */ | |
| if (vk->reset_pid) { | |
| dev_err(&vk->pdev->dev, | |
| "No context allowed during reset by pid %d\n", | |
| vk->reset_pid); | |
| goto in_reset_exit; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(vk->ctx); i++) { | |
| if (!vk->ctx[i].in_use) { | |
| vk->ctx[i].in_use = true; | |
| ctx = &vk->ctx[i]; | |
| break; | |
| } | |
| } | |
| if (!ctx) { | |
| dev_err(&vk->pdev->dev, "All context in use\n"); | |
| goto all_in_use_exit; | |
| } | |
| /* set the pid and insert it to hash table */ | |
| ctx->pid = pid; | |
| ctx->hash_idx = hash_idx; | |
| list_add_tail(&ctx->node, &vk->pid_ht[hash_idx].head); | |
| /* increase kref */ | |
| kref_get(&vk->kref); | |
| /* clear counter */ | |
| atomic_set(&ctx->pend_cnt, 0); | |
| atomic_set(&ctx->dma_cnt, 0); | |
| init_waitqueue_head(&ctx->rd_wq); | |
| all_in_use_exit: | |
| in_reset_exit: | |
| spin_unlock(&vk->ctx_lock); | |
| return ctx; | |
| } | |
| static u16 bcm_vk_get_msg_id(struct bcm_vk *vk) | |
| { | |
| u16 rc = VK_MSG_ID_OVERFLOW; | |
| u16 test_bit_count = 0; | |
| spin_lock(&vk->msg_id_lock); | |
| while (test_bit_count < (VK_MSG_ID_BITMAP_SIZE - 1)) { | |
| /* | |
| * first time come in this loop, msg_id will be 0 | |
| * and the first one tested will be 1. We skip | |
| * VK_SIMPLEX_MSG_ID (0) for one way host2vk | |
| * communication | |
| */ | |
| vk->msg_id++; | |
| if (vk->msg_id == VK_MSG_ID_BITMAP_SIZE) | |
| vk->msg_id = 1; | |
| if (test_bit(vk->msg_id, vk->bmap)) { | |
| test_bit_count++; | |
| continue; | |
| } | |
| rc = vk->msg_id; | |
| bitmap_set(vk->bmap, vk->msg_id, 1); | |
| break; | |
| } | |
| spin_unlock(&vk->msg_id_lock); | |
| return rc; | |
| } | |
| static int bcm_vk_free_ctx(struct bcm_vk *vk, struct bcm_vk_ctx *ctx) | |
| { | |
| u32 idx; | |
| u32 hash_idx; | |
| pid_t pid; | |
| struct bcm_vk_ctx *entry; | |
| int count = 0; | |
| if (!ctx) { | |
| dev_err(&vk->pdev->dev, "NULL context detected\n"); | |
| return -EINVAL; | |
| } | |
| idx = ctx->idx; | |
| pid = ctx->pid; | |
| spin_lock(&vk->ctx_lock); | |
| if (!vk->ctx[idx].in_use) { | |
| dev_err(&vk->pdev->dev, "context[%d] not in use!\n", idx); | |
| } else { | |
| vk->ctx[idx].in_use = false; | |
| vk->ctx[idx].miscdev = NULL; | |
| /* Remove it from hash list and see if it is the last one. */ | |
| list_del(&ctx->node); | |
| hash_idx = ctx->hash_idx; | |
| list_for_each_entry(entry, &vk->pid_ht[hash_idx].head, node) { | |
| if (entry->pid == pid) | |
| count++; | |
| } | |
| } | |
| spin_unlock(&vk->ctx_lock); | |
| return count; | |
| } | |
| static void bcm_vk_free_wkent(struct device *dev, struct bcm_vk_wkent *entry) | |
| { | |
| int proc_cnt; | |
| bcm_vk_sg_free(dev, entry->dma, VK_DMA_MAX_ADDRS, &proc_cnt); | |
| if (proc_cnt) | |
| atomic_dec(&entry->ctx->dma_cnt); | |
| kfree(entry->to_h_msg); | |
| kfree(entry); | |
| } | |
| static void bcm_vk_drain_all_pend(struct device *dev, | |
| struct bcm_vk_msg_chan *chan, | |
| struct bcm_vk_ctx *ctx) | |
| { | |
| u32 num; | |
| struct bcm_vk_wkent *entry, *tmp; | |
| struct bcm_vk *vk; | |
| struct list_head del_q; | |
| if (ctx) | |
| vk = container_of(ctx->miscdev, struct bcm_vk, miscdev); | |
| INIT_LIST_HEAD(&del_q); | |
| spin_lock(&chan->pendq_lock); | |
| for (num = 0; num < chan->q_nr; num++) { | |
| list_for_each_entry_safe(entry, tmp, &chan->pendq[num], node) { | |
| if ((!ctx) || (entry->ctx->idx == ctx->idx)) { | |
| list_move_tail(&entry->node, &del_q); | |
| } | |
| } | |
| } | |
| spin_unlock(&chan->pendq_lock); | |
| /* batch clean up */ | |
| num = 0; | |
| list_for_each_entry_safe(entry, tmp, &del_q, node) { | |
| list_del(&entry->node); | |
| num++; | |
| if (ctx) { | |
| struct vk_msg_blk *msg; | |
| int bit_set; | |
| bool responded; | |
| u32 msg_id; | |
| /* if it is specific ctx, log for any stuck */ | |
| msg = entry->to_v_msg; | |
| msg_id = get_msg_id(msg); | |
| bit_set = test_bit(msg_id, vk->bmap); | |
| responded = entry->to_h_msg ? true : false; | |
| if (num <= batch_log) | |
| dev_info(dev, | |
| "Drained: fid %u size %u msg 0x%x(seq-%x) ctx 0x%x[fd-%d] args:[0x%x 0x%x] resp %s, bmap %d\n", | |
| msg->function_id, msg->size, | |
| msg_id, entry->seq_num, | |
| msg->context_id, entry->ctx->idx, | |
| msg->cmd, msg->arg, | |
| responded ? "T" : "F", bit_set); | |
| if (responded) | |
| atomic_dec(&ctx->pend_cnt); | |
| else if (bit_set) | |
| bcm_vk_msgid_bitmap_clear(vk, msg_id, 1); | |
| } | |
| bcm_vk_free_wkent(dev, entry); | |
| } | |
| if (num && ctx) | |
| dev_info(dev, "Total drained items %d [fd-%d]\n", | |
| num, ctx->idx); | |
| } | |
| void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk) | |
| { | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_v_msg_chan, NULL); | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_h_msg_chan, NULL); | |
| } | |
| /* | |
| * Function to sync up the messages queue info that is provided by BAR1 | |
| */ | |
| int bcm_vk_sync_msgq(struct bcm_vk *vk, bool force_sync) | |
| { | |
| struct bcm_vk_msgq __iomem *msgq; | |
| struct device *dev = &vk->pdev->dev; | |
| u32 msgq_off; | |
| u32 num_q; | |
| struct bcm_vk_msg_chan *chan_list[] = {&vk->to_v_msg_chan, | |
| &vk->to_h_msg_chan}; | |
| struct bcm_vk_msg_chan *chan; | |
| int i, j; | |
| int ret = 0; | |
| /* | |
| * If the driver is loaded at startup where vk OS is not up yet, | |
| * the msgq-info may not be available until a later time. In | |
| * this case, we skip and the sync function is supposed to be | |
| * called again. | |
| */ | |
| if (!bcm_vk_msgq_marker_valid(vk)) { | |
| dev_info(dev, "BAR1 msgq marker not initialized.\n"); | |
| return -EAGAIN; | |
| } | |
| msgq_off = vkread32(vk, BAR_1, VK_BAR1_MSGQ_CTRL_OFF); | |
| /* each side is always half the total */ | |
| num_q = vkread32(vk, BAR_1, VK_BAR1_MSGQ_NR) / 2; | |
| if (!num_q || (num_q > VK_MSGQ_PER_CHAN_MAX)) { | |
| dev_err(dev, | |
| "Advertised msgq %d error - max %d allowed\n", | |
| num_q, VK_MSGQ_PER_CHAN_MAX); | |
| return -EINVAL; | |
| } | |
| vk->to_v_msg_chan.q_nr = num_q; | |
| vk->to_h_msg_chan.q_nr = num_q; | |
| /* first msgq location */ | |
| msgq = vk->bar[BAR_1] + msgq_off; | |
| /* | |
| * if this function is called when it is already inited, | |
| * something is wrong | |
| */ | |
| if (bcm_vk_drv_access_ok(vk) && !force_sync) { | |
| dev_err(dev, "Msgq info already in sync\n"); | |
| return -EPERM; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(chan_list); i++) { | |
| chan = chan_list[i]; | |
| memset(chan->sync_qinfo, 0, sizeof(chan->sync_qinfo)); | |
| for (j = 0; j < num_q; j++) { | |
| struct bcm_vk_sync_qinfo *qinfo; | |
| u32 msgq_start; | |
| u32 msgq_size; | |
| u32 msgq_nxt; | |
| u32 msgq_db_offset, q_db_offset; | |
| chan->msgq[j] = msgq; | |
| msgq_start = readl_relaxed(&msgq->start); | |
| msgq_size = readl_relaxed(&msgq->size); | |
| msgq_nxt = readl_relaxed(&msgq->nxt); | |
| msgq_db_offset = readl_relaxed(&msgq->db_offset); | |
| q_db_offset = (msgq_db_offset & ((1 << DB_SHIFT) - 1)); | |
| if (q_db_offset == (~msgq_db_offset >> DB_SHIFT)) | |
| msgq_db_offset = q_db_offset; | |
| else | |
| /* fall back to default */ | |
| msgq_db_offset = VK_BAR0_Q_DB_BASE(j); | |
| dev_info(dev, | |
| "MsgQ[%d] type %d num %d, @ 0x%x, db_offset 0x%x rd_idx %d wr_idx %d, size %d, nxt 0x%x\n", | |
| j, | |
| readw_relaxed(&msgq->type), | |
| readw_relaxed(&msgq->num), | |
| msgq_start, | |
| msgq_db_offset, | |
| readl_relaxed(&msgq->rd_idx), | |
| readl_relaxed(&msgq->wr_idx), | |
| msgq_size, | |
| msgq_nxt); | |
| qinfo = &chan->sync_qinfo[j]; | |
| /* formulate and record static info */ | |
| qinfo->q_start = vk->bar[BAR_1] + msgq_start; | |
| qinfo->q_size = msgq_size; | |
| /* set low threshold as 50% or 1/2 */ | |
| qinfo->q_low = qinfo->q_size >> 1; | |
| qinfo->q_mask = qinfo->q_size - 1; | |
| qinfo->q_db_offset = msgq_db_offset; | |
| msgq++; | |
| } | |
| } | |
| /* Publish message queue info before allowing driver access. */ | |
| atomic_set_release(&vk->msgq_inited, 1); | |
| return ret; | |
| } | |
| static int bcm_vk_msg_chan_init(struct bcm_vk_msg_chan *chan) | |
| { | |
| u32 i; | |
| mutex_init(&chan->msgq_mutex); | |
| spin_lock_init(&chan->pendq_lock); | |
| for (i = 0; i < VK_MSGQ_MAX_NR; i++) | |
| INIT_LIST_HEAD(&chan->pendq[i]); | |
| return 0; | |
| } | |
| static void bcm_vk_append_pendq(struct bcm_vk_msg_chan *chan, u16 q_num, | |
| struct bcm_vk_wkent *entry) | |
| { | |
| struct bcm_vk_ctx *ctx; | |
| spin_lock(&chan->pendq_lock); | |
| list_add_tail(&entry->node, &chan->pendq[q_num]); | |
| if (entry->to_h_msg) { | |
| ctx = entry->ctx; | |
| atomic_inc(&ctx->pend_cnt); | |
| wake_up_interruptible(&ctx->rd_wq); | |
| } | |
| spin_unlock(&chan->pendq_lock); | |
| } | |
| static u32 bcm_vk_append_ib_sgl(struct bcm_vk *vk, | |
| struct bcm_vk_wkent *entry, | |
| struct _vk_data *data, | |
| unsigned int num_planes) | |
| { | |
| unsigned int i; | |
| unsigned int item_cnt = 0; | |
| struct device *dev = &vk->pdev->dev; | |
| struct bcm_vk_msg_chan *chan = &vk->to_v_msg_chan; | |
| struct vk_msg_blk *msg = &entry->to_v_msg[0]; | |
| struct bcm_vk_msgq __iomem *msgq; | |
| struct bcm_vk_sync_qinfo *qinfo; | |
| u32 ib_sgl_size = 0; | |
| u8 *buf = (u8 *)&entry->to_v_msg[entry->to_v_blks]; | |
| u32 avail; | |
| u32 q_num; | |
| /* check if high watermark is hit, and if so, skip */ | |
| q_num = get_q_num(msg); | |
| msgq = chan->msgq[q_num]; | |
| qinfo = &chan->sync_qinfo[q_num]; | |
| avail = msgq_avail_space(msgq, qinfo); | |
| if (avail < qinfo->q_low) { | |
| dev_dbg(dev, "Skip inserting inband SGL, [0x%x/0x%x]\n", | |
| avail, qinfo->q_size); | |
| return 0; | |
| } | |
| for (i = 0; i < num_planes; i++) { | |
| if (data[i].address && | |
| (ib_sgl_size + data[i].size) <= vk->ib_sgl_size) { | |
| item_cnt++; | |
| memcpy(buf, entry->dma[i].sglist, data[i].size); | |
| ib_sgl_size += data[i].size; | |
| buf += data[i].size; | |
| } | |
| } | |
| dev_dbg(dev, "Num %u sgl items appended, size 0x%x, room 0x%x\n", | |
| item_cnt, ib_sgl_size, vk->ib_sgl_size); | |
| /* round up size */ | |
| ib_sgl_size = (ib_sgl_size + VK_MSGQ_BLK_SIZE - 1) | |
| >> VK_MSGQ_BLK_SZ_SHIFT; | |
| return ib_sgl_size; | |
| } | |
| void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val) | |
| { | |
| struct bcm_vk_msg_chan *chan = &vk->to_v_msg_chan; | |
| struct bcm_vk_sync_qinfo *qinfo = &chan->sync_qinfo[q_num]; | |
| vkwrite32(vk, db_val, BAR_0, qinfo->q_db_offset); | |
| } | |
| static int bcm_to_v_msg_enqueue(struct bcm_vk *vk, struct bcm_vk_wkent *entry) | |
| { | |
| static u32 seq_num; | |
| struct bcm_vk_msg_chan *chan = &vk->to_v_msg_chan; | |
| struct device *dev = &vk->pdev->dev; | |
| struct vk_msg_blk *src = &entry->to_v_msg[0]; | |
| struct vk_msg_blk __iomem *dst; | |
| struct bcm_vk_msgq __iomem *msgq; | |
| struct bcm_vk_sync_qinfo *qinfo; | |
| u32 q_num = get_q_num(src); | |
| u32 wr_idx; /* local copy */ | |
| u32 i; | |
| u32 avail; | |
| u32 retry; | |
| if (entry->to_v_blks != src->size + 1) { | |
| dev_err(dev, "number of blks %d not matching %d MsgId[0x%x]: func %d ctx 0x%x\n", | |
| entry->to_v_blks, | |
| src->size + 1, | |
| get_msg_id(src), | |
| src->function_id, | |
| src->context_id); | |
| return -EMSGSIZE; | |
| } | |
| msgq = chan->msgq[q_num]; | |
| qinfo = &chan->sync_qinfo[q_num]; | |
| mutex_lock(&chan->msgq_mutex); | |
| avail = msgq_avail_space(msgq, qinfo); | |
| /* if not enough space, return EAGAIN and let app handles it */ | |
| retry = 0; | |
| while ((avail < entry->to_v_blks) && | |
| (retry++ < BCM_VK_H2VK_ENQ_RETRY)) { | |
| mutex_unlock(&chan->msgq_mutex); | |
| msleep(BCM_VK_H2VK_ENQ_RETRY_DELAY_MS); | |
| mutex_lock(&chan->msgq_mutex); | |
| avail = msgq_avail_space(msgq, qinfo); | |
| } | |
| if (retry > BCM_VK_H2VK_ENQ_RETRY) { | |
| mutex_unlock(&chan->msgq_mutex); | |
| return -EAGAIN; | |
| } | |
| /* at this point, mutex is taken and there is enough space */ | |
| entry->seq_num = seq_num++; /* update debug seq number */ | |
| wr_idx = readl_relaxed(&msgq->wr_idx); | |
| if (wr_idx >= qinfo->q_size) { | |
| dev_crit(dev, "Invalid wr_idx 0x%x => max 0x%x!", | |
| wr_idx, qinfo->q_size); | |
| bcm_vk_blk_drv_access(vk); | |
| bcm_vk_set_host_alert(vk, ERR_LOG_HOST_PCIE_DWN); | |
| goto idx_err; | |
| } | |
| dst = msgq_blk_addr(qinfo, wr_idx); | |
| for (i = 0; i < entry->to_v_blks; i++) { | |
| memcpy_toio(dst, src, sizeof(*dst)); | |
| src++; | |
| wr_idx = msgq_inc(qinfo, wr_idx, 1); | |
| dst = msgq_blk_addr(qinfo, wr_idx); | |
| } | |
| /* flush the write pointer */ | |
| writel(wr_idx, &msgq->wr_idx); | |
| /* log new info for debugging */ | |
| dev_dbg(dev, | |
| "MsgQ[%d] [Rd Wr] = [%d %d] blks inserted %d - Q = [u-%d a-%d]/%d\n", | |
| readl_relaxed(&msgq->num), | |
| readl_relaxed(&msgq->rd_idx), | |
| wr_idx, | |
| entry->to_v_blks, | |
| msgq_occupied(msgq, qinfo), | |
| msgq_avail_space(msgq, qinfo), | |
| readl_relaxed(&msgq->size)); | |
| /* | |
| * press door bell based on queue number. 1 is added to the wr_idx | |
| * to avoid the value of 0 appearing on the VK side to distinguish | |
| * from initial value. | |
| */ | |
| bcm_to_v_q_doorbell(vk, q_num, wr_idx + 1); | |
| idx_err: | |
| mutex_unlock(&chan->msgq_mutex); | |
| return 0; | |
| } | |
| int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type, | |
| const pid_t pid, const u32 q_num) | |
| { | |
| int rc = 0; | |
| struct bcm_vk_wkent *entry; | |
| struct device *dev = &vk->pdev->dev; | |
| /* | |
| * check if the marker is still good. Sometimes, the PCIe interface may | |
| * have gone done, and if so and we ship down thing based on broken | |
| * values, kernel may panic. | |
| */ | |
| if (!bcm_vk_msgq_marker_valid(vk)) { | |
| dev_info(dev, "PCIe comm chan - invalid marker (0x%x)!\n", | |
| vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY)); | |
| return -EINVAL; | |
| } | |
| entry = kzalloc_flex(*entry, to_v_msg, 1); | |
| if (!entry) | |
| return -ENOMEM; | |
| entry->to_v_blks = 1; /* always 1 block */ | |
| /* fill up necessary data */ | |
| entry->to_v_msg[0].function_id = VK_FID_SHUTDOWN; | |
| set_q_num(&entry->to_v_msg[0], q_num); | |
| set_msg_id(&entry->to_v_msg[0], VK_SIMPLEX_MSG_ID); | |
| entry->to_v_msg[0].cmd = shut_type; | |
| entry->to_v_msg[0].arg = pid; | |
| rc = bcm_to_v_msg_enqueue(vk, entry); | |
| if (rc) | |
| dev_err(dev, | |
| "Sending shutdown message to q %d for pid %d fails.\n", | |
| get_q_num(&entry->to_v_msg[0]), pid); | |
| kfree(entry); | |
| return rc; | |
| } | |
| static int bcm_vk_handle_last_sess(struct bcm_vk *vk, const pid_t pid, | |
| const u32 q_num) | |
| { | |
| int rc = 0; | |
| struct device *dev = &vk->pdev->dev; | |
| /* | |
| * don't send down or do anything if message queue is not initialized | |
| * and if it is the reset session, clear it. | |
| */ | |
| if (!bcm_vk_drv_access_ok(vk)) { | |
| if (vk->reset_pid == pid) | |
| vk->reset_pid = 0; | |
| return -EPERM; | |
| } | |
| dev_dbg(dev, "No more sessions, shut down pid %d\n", pid); | |
| /* only need to do it if it is not the reset process */ | |
| if (vk->reset_pid != pid) | |
| rc = bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_PID, pid, q_num); | |
| else | |
| /* put reset_pid to 0 if it is exiting last session */ | |
| vk->reset_pid = 0; | |
| return rc; | |
| } | |
| static struct bcm_vk_wkent *bcm_vk_dequeue_pending(struct bcm_vk *vk, | |
| struct bcm_vk_msg_chan *chan, | |
| u16 q_num, | |
| u16 msg_id) | |
| { | |
| struct bcm_vk_wkent *entry = NULL, *iter; | |
| spin_lock(&chan->pendq_lock); | |
| list_for_each_entry(iter, &chan->pendq[q_num], node) { | |
| if (get_msg_id(&iter->to_v_msg[0]) == msg_id) { | |
| list_del(&iter->node); | |
| entry = iter; | |
| bcm_vk_msgid_bitmap_clear(vk, msg_id, 1); | |
| break; | |
| } | |
| } | |
| spin_unlock(&chan->pendq_lock); | |
| return entry; | |
| } | |
| s32 bcm_to_h_msg_dequeue(struct bcm_vk *vk) | |
| { | |
| struct device *dev = &vk->pdev->dev; | |
| struct bcm_vk_msg_chan *chan = &vk->to_h_msg_chan; | |
| struct vk_msg_blk *data; | |
| struct vk_msg_blk __iomem *src; | |
| struct vk_msg_blk *dst; | |
| struct bcm_vk_msgq __iomem *msgq; | |
| struct bcm_vk_sync_qinfo *qinfo; | |
| struct bcm_vk_wkent *entry; | |
| u32 rd_idx, wr_idx; | |
| u32 q_num, msg_id, j; | |
| u32 num_blks; | |
| s32 total = 0; | |
| int cnt = 0; | |
| int msg_processed = 0; | |
| int max_msg_to_process; | |
| bool exit_loop; | |
| /* | |
| * drain all the messages from the queues, and find its pending | |
| * entry in the to_v queue, based on msg_id & q_num, and move the | |
| * entry to the to_h pending queue, waiting for user space | |
| * program to extract | |
| */ | |
| mutex_lock(&chan->msgq_mutex); | |
| for (q_num = 0; q_num < chan->q_nr; q_num++) { | |
| msgq = chan->msgq[q_num]; | |
| qinfo = &chan->sync_qinfo[q_num]; | |
| max_msg_to_process = BCM_VK_MSG_PROC_MAX_LOOP * qinfo->q_size; | |
| rd_idx = readl_relaxed(&msgq->rd_idx); | |
| wr_idx = readl_relaxed(&msgq->wr_idx); | |
| msg_processed = 0; | |
| exit_loop = false; | |
| while ((rd_idx != wr_idx) && !exit_loop) { | |
| u8 src_size; | |
| /* | |
| * Make a local copy and get pointer to src blk | |
| * The rd_idx is masked before getting the pointer to | |
| * avoid out of bound access in case the interface goes | |
| * down. It will end up pointing to the last block in | |
| * the buffer, but subsequent src->size check would be | |
| * able to catch this. | |
| */ | |
| src = msgq_blk_addr(qinfo, rd_idx & qinfo->q_mask); | |
| src_size = readb(&src->size); | |
| if ((rd_idx >= qinfo->q_size) || | |
| (src_size > (qinfo->q_size - 1))) { | |
| dev_crit(dev, | |
| "Invalid rd_idx 0x%x or size 0x%x => max 0x%x!", | |
| rd_idx, src_size, qinfo->q_size); | |
| bcm_vk_blk_drv_access(vk); | |
| bcm_vk_set_host_alert(vk, | |
| ERR_LOG_HOST_PCIE_DWN); | |
| goto idx_err; | |
| } | |
| num_blks = src_size + 1; | |
| data = kzalloc(num_blks * VK_MSGQ_BLK_SIZE, GFP_KERNEL); | |
| if (data) { | |
| /* copy messages and linearize it */ | |
| dst = data; | |
| for (j = 0; j < num_blks; j++) { | |
| memcpy_fromio(dst, src, sizeof(*dst)); | |
| dst++; | |
| rd_idx = msgq_inc(qinfo, rd_idx, 1); | |
| src = msgq_blk_addr(qinfo, rd_idx); | |
| } | |
| total++; | |
| } else { | |
| /* | |
| * if we could not allocate memory in kernel, | |
| * that is fatal. | |
| */ | |
| dev_crit(dev, "Kernel mem allocation failure.\n"); | |
| total = -ENOMEM; | |
| goto idx_err; | |
| } | |
| /* flush rd pointer after a message is dequeued */ | |
| writel(rd_idx, &msgq->rd_idx); | |
| /* log new info for debugging */ | |
| dev_dbg(dev, | |
| "MsgQ[%d] [Rd Wr] = [%d %d] blks extracted %d - Q = [u-%d a-%d]/%d\n", | |
| readl_relaxed(&msgq->num), | |
| rd_idx, | |
| wr_idx, | |
| num_blks, | |
| msgq_occupied(msgq, qinfo), | |
| msgq_avail_space(msgq, qinfo), | |
| readl_relaxed(&msgq->size)); | |
| /* | |
| * No need to search if it is an autonomous one-way | |
| * message from driver, as these messages do not bear | |
| * a to_v pending item. Currently, only the shutdown | |
| * message falls into this category. | |
| */ | |
| if (data->function_id == VK_FID_SHUTDOWN) { | |
| kfree(data); | |
| continue; | |
| } | |
| msg_id = get_msg_id(data); | |
| /* lookup original message in to_v direction */ | |
| entry = bcm_vk_dequeue_pending(vk, | |
| &vk->to_v_msg_chan, | |
| q_num, | |
| msg_id); | |
| /* | |
| * if there is message to does not have prior send, | |
| * this is the location to add here | |
| */ | |
| if (entry) { | |
| entry->to_h_blks = num_blks; | |
| entry->to_h_msg = data; | |
| bcm_vk_append_pendq(&vk->to_h_msg_chan, | |
| q_num, entry); | |
| } else { | |
| if (cnt++ < batch_log) | |
| dev_info(dev, | |
| "Could not find MsgId[0x%x] for resp func %d bmap %d\n", | |
| msg_id, data->function_id, | |
| test_bit(msg_id, vk->bmap)); | |
| kfree(data); | |
| } | |
| /* Fetch wr_idx to handle more back-to-back events */ | |
| wr_idx = readl(&msgq->wr_idx); | |
| /* | |
| * cap the max so that even we try to handle more back-to-back events, | |
| * so that it won't hold CPU too long or in case rd/wr idexes are | |
| * corrupted which triggers infinite looping. | |
| */ | |
| if (++msg_processed >= max_msg_to_process) { | |
| dev_warn(dev, "Q[%d] Per loop processing exceeds %d\n", | |
| q_num, max_msg_to_process); | |
| exit_loop = true; | |
| } | |
| } | |
| } | |
| idx_err: | |
| mutex_unlock(&chan->msgq_mutex); | |
| dev_dbg(dev, "total %d drained from queues\n", total); | |
| return total; | |
| } | |
| /* | |
| * init routine for all required data structures | |
| */ | |
| static int bcm_vk_data_init(struct bcm_vk *vk) | |
| { | |
| int i; | |
| spin_lock_init(&vk->ctx_lock); | |
| for (i = 0; i < ARRAY_SIZE(vk->ctx); i++) { | |
| vk->ctx[i].in_use = false; | |
| vk->ctx[i].idx = i; /* self identity */ | |
| vk->ctx[i].miscdev = NULL; | |
| } | |
| spin_lock_init(&vk->msg_id_lock); | |
| spin_lock_init(&vk->host_alert_lock); | |
| vk->msg_id = 0; | |
| /* initialize hash table */ | |
| for (i = 0; i < VK_PID_HT_SZ; i++) | |
| INIT_LIST_HEAD(&vk->pid_ht[i].head); | |
| return 0; | |
| } | |
| irqreturn_t bcm_vk_msgq_irqhandler(int irq, void *dev_id) | |
| { | |
| struct bcm_vk *vk = dev_id; | |
| if (!bcm_vk_drv_access_ok(vk)) { | |
| dev_err(&vk->pdev->dev, | |
| "Interrupt %d received when msgq not inited\n", irq); | |
| goto skip_schedule_work; | |
| } | |
| queue_work(vk->wq_thread, &vk->wq_work); | |
| skip_schedule_work: | |
| return IRQ_HANDLED; | |
| } | |
| int bcm_vk_open(struct inode *inode, struct file *p_file) | |
| { | |
| struct bcm_vk_ctx *ctx; | |
| struct miscdevice *miscdev = (struct miscdevice *)p_file->private_data; | |
| struct bcm_vk *vk = container_of(miscdev, struct bcm_vk, miscdev); | |
| struct device *dev = &vk->pdev->dev; | |
| int rc = 0; | |
| /* get a context and set it up for file */ | |
| ctx = bcm_vk_get_ctx(vk, task_tgid_nr(current)); | |
| if (!ctx) { | |
| dev_err(dev, "Error allocating context\n"); | |
| rc = -ENOMEM; | |
| } else { | |
| /* | |
| * set up context and replace private data with context for | |
| * other methods to use. Reason for the context is because | |
| * it is allowed for multiple sessions to open the sysfs, and | |
| * for each file open, when upper layer query the response, | |
| * only those that are tied to a specific open should be | |
| * returned. The context->idx will be used for such binding | |
| */ | |
| ctx->miscdev = miscdev; | |
| p_file->private_data = ctx; | |
| dev_dbg(dev, "ctx_returned with idx %d, pid %d\n", | |
| ctx->idx, ctx->pid); | |
| } | |
| return rc; | |
| } | |
| ssize_t bcm_vk_read(struct file *p_file, | |
| char __user *buf, | |
| size_t count, | |
| loff_t *f_pos) | |
| { | |
| ssize_t rc = -ENOMSG; | |
| struct bcm_vk_ctx *ctx = p_file->private_data; | |
| struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, | |
| miscdev); | |
| struct device *dev = &vk->pdev->dev; | |
| struct bcm_vk_msg_chan *chan = &vk->to_h_msg_chan; | |
| struct bcm_vk_wkent *entry = NULL, *iter; | |
| struct vk_msg_blk tmp_msg; | |
| u32 tmp_usr_msg_id; | |
| u32 tmp_blks; | |
| u32 q_num; | |
| u32 rsp_length; | |
| if (!bcm_vk_drv_access_ok(vk)) | |
| return -EPERM; | |
| dev_dbg(dev, "Buf count %zu\n", count); | |
| /* | |
| * search through the pendq on the to_h chan, and return only those | |
| * that belongs to the same context. Search is always from the high to | |
| * the low priority queues | |
| */ | |
| spin_lock(&chan->pendq_lock); | |
| for (q_num = 0; q_num < chan->q_nr; q_num++) { | |
| list_for_each_entry(iter, &chan->pendq[q_num], node) { | |
| if (iter->ctx->idx == ctx->idx) { | |
| if (count >= | |
| (iter->to_h_blks * VK_MSGQ_BLK_SIZE)) { | |
| list_del(&iter->node); | |
| atomic_dec(&ctx->pend_cnt); | |
| entry = iter; | |
| } else { | |
| /* buffer not big enough */ | |
| tmp_msg = iter->to_h_msg[0]; | |
| tmp_usr_msg_id = iter->usr_msg_id; | |
| tmp_blks = iter->to_h_blks; | |
| rc = -EMSGSIZE; | |
| } | |
| goto read_loop_exit; | |
| } | |
| } | |
| } | |
| read_loop_exit: | |
| spin_unlock(&chan->pendq_lock); | |
| if (entry) { | |
| /* retrieve the passed down msg_id */ | |
| set_msg_id(&entry->to_h_msg[0], entry->usr_msg_id); | |
| rsp_length = entry->to_h_blks * VK_MSGQ_BLK_SIZE; | |
| if (copy_to_user(buf, entry->to_h_msg, rsp_length) == 0) | |
| rc = rsp_length; | |
| bcm_vk_free_wkent(dev, entry); | |
| } else if (rc == -EMSGSIZE) { | |
| /* | |
| * in this case, return just the first block, so | |
| * that app knows what size it is looking for. | |
| */ | |
| set_msg_id(&tmp_msg, tmp_usr_msg_id); | |
| tmp_msg.size = tmp_blks - 1; | |
| if (copy_to_user(buf, &tmp_msg, VK_MSGQ_BLK_SIZE) != 0) { | |
| dev_err(dev, "Error return 1st block in -EMSGSIZE\n"); | |
| rc = -EFAULT; | |
| } | |
| } | |
| return rc; | |
| } | |
| ssize_t bcm_vk_write(struct file *p_file, | |
| const char __user *buf, | |
| size_t count, | |
| loff_t *f_pos) | |
| { | |
| ssize_t rc; | |
| struct bcm_vk_ctx *ctx = p_file->private_data; | |
| struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, | |
| miscdev); | |
| struct bcm_vk_msgq __iomem *msgq; | |
| struct device *dev = &vk->pdev->dev; | |
| struct bcm_vk_wkent *entry; | |
| u32 sgl_extra_blks; | |
| u32 q_num; | |
| u32 msg_size; | |
| u32 msgq_size; | |
| size_t entry_size; | |
| if (!bcm_vk_drv_access_ok(vk)) | |
| return -EPERM; | |
| dev_dbg(dev, "Msg count %zu\n", count); | |
| /* first, do sanity check where count should be multiple of basic blk */ | |
| if (!count || count & (VK_MSGQ_BLK_SIZE - 1)) { | |
| dev_err(dev, "Failure with size %zu not a positive multiple of %zu\n", | |
| count, VK_MSGQ_BLK_SIZE); | |
| rc = -EINVAL; | |
| goto write_err; | |
| } | |
| if (check_add_overflow(sizeof(*entry), count, &entry_size) || | |
| check_add_overflow(entry_size, vk->ib_sgl_size, &entry_size)) { | |
| rc = -EOVERFLOW; | |
| goto write_err; | |
| } | |
| /* allocate the work entry + buffer for size count and inband sgl */ | |
| entry = kzalloc(entry_size, GFP_KERNEL); | |
| if (!entry) { | |
| rc = -ENOMEM; | |
| goto write_err; | |
| } | |
| entry->to_v_blks = count >> VK_MSGQ_BLK_SZ_SHIFT; | |
| /* now copy msg from user space, and then formulate the work entry */ | |
| if (copy_from_user(&entry->to_v_msg[0], buf, count)) { | |
| rc = -EFAULT; | |
| goto write_free_ent; | |
| } | |
| entry->ctx = ctx; | |
| /* do a check on the blk size which could not exceed queue space */ | |
| q_num = get_q_num(&entry->to_v_msg[0]); | |
| msgq = vk->to_v_msg_chan.msgq[q_num]; | |
| msgq_size = readl_relaxed(&msgq->size); | |
| if (entry->to_v_blks + (vk->ib_sgl_size >> VK_MSGQ_BLK_SZ_SHIFT) | |
| > (msgq_size - 1)) { | |
| dev_err(dev, "Blk size %d exceed max queue size allowed %d\n", | |
| entry->to_v_blks, msgq_size - 1); | |
| rc = -EINVAL; | |
| goto write_free_ent; | |
| } | |
| /* Use internal message id */ | |
| entry->usr_msg_id = get_msg_id(&entry->to_v_msg[0]); | |
| rc = bcm_vk_get_msg_id(vk); | |
| if (rc == VK_MSG_ID_OVERFLOW) { | |
| dev_err(dev, "msg_id overflow\n"); | |
| rc = -EOVERFLOW; | |
| goto write_free_ent; | |
| } | |
| set_msg_id(&entry->to_v_msg[0], rc); | |
| ctx->q_num = q_num; | |
| dev_dbg(dev, | |
| "[Q-%d]Message ctx id %d, usr_msg_id 0x%x sent msg_id 0x%x\n", | |
| ctx->q_num, ctx->idx, entry->usr_msg_id, | |
| get_msg_id(&entry->to_v_msg[0])); | |
| if (entry->to_v_msg[0].function_id == VK_FID_TRANS_BUF) { | |
| /* Convert any pointers to sg list */ | |
| unsigned int num_planes; | |
| int dir; | |
| struct _vk_data *data; | |
| /* | |
| * check if we are in reset, if so, no buffer transfer is | |
| * allowed and return error. | |
| */ | |
| if (vk->reset_pid) { | |
| dev_dbg(dev, "No Transfer allowed during reset, pid %d.\n", | |
| ctx->pid); | |
| rc = -EACCES; | |
| goto write_free_msgid; | |
| } | |
| num_planes = entry->to_v_msg[0].cmd & VK_CMD_PLANES_MASK; | |
| if ((entry->to_v_msg[0].cmd & VK_CMD_MASK) == VK_CMD_DOWNLOAD) | |
| dir = DMA_FROM_DEVICE; | |
| else | |
| dir = DMA_TO_DEVICE; | |
| /* Calculate vk_data location */ | |
| /* Go to end of the message */ | |
| msg_size = entry->to_v_msg[0].size; | |
| if (msg_size > entry->to_v_blks) { | |
| rc = -EMSGSIZE; | |
| goto write_free_msgid; | |
| } | |
| data = (struct _vk_data *)&entry->to_v_msg[msg_size + 1]; | |
| /* Now back up to the start of the pointers */ | |
| data -= num_planes; | |
| /* Convert user addresses to DMA SG List */ | |
| rc = bcm_vk_sg_alloc(dev, entry->dma, dir, data, num_planes); | |
| if (rc) | |
| goto write_free_msgid; | |
| atomic_inc(&ctx->dma_cnt); | |
| /* try to embed inband sgl */ | |
| sgl_extra_blks = bcm_vk_append_ib_sgl(vk, entry, data, | |
| num_planes); | |
| entry->to_v_blks += sgl_extra_blks; | |
| entry->to_v_msg[0].size += sgl_extra_blks; | |
| } else if (entry->to_v_msg[0].function_id == VK_FID_INIT && | |
| entry->to_v_msg[0].context_id == VK_NEW_CTX) { | |
| /* | |
| * Init happens in 2 stages, only the first stage contains the | |
| * pid that needs translating. | |
| */ | |
| pid_t org_pid, pid; | |
| /* | |
| * translate the pid into the unique host space as user | |
| * may run sessions inside containers or process | |
| * namespaces. | |
| */ | |
| #define VK_MSG_PID_MASK 0xffffff00 | |
| #define VK_MSG_PID_SH 8 | |
| org_pid = (entry->to_v_msg[0].arg & VK_MSG_PID_MASK) | |
| >> VK_MSG_PID_SH; | |
| pid = task_tgid_nr(current); | |
| entry->to_v_msg[0].arg = | |
| (entry->to_v_msg[0].arg & ~VK_MSG_PID_MASK) | | |
| (pid << VK_MSG_PID_SH); | |
| if (org_pid != pid) | |
| dev_dbg(dev, "In PID 0x%x(%d), converted PID 0x%x(%d)\n", | |
| org_pid, org_pid, pid, pid); | |
| } | |
| /* | |
| * store work entry to pending queue until a response is received. | |
| * This needs to be done before enqueuing the message | |
| */ | |
| bcm_vk_append_pendq(&vk->to_v_msg_chan, q_num, entry); | |
| rc = bcm_to_v_msg_enqueue(vk, entry); | |
| if (rc) { | |
| dev_err(dev, "Fail to enqueue msg to to_v queue\n"); | |
| /* remove message from pending list */ | |
| entry = bcm_vk_dequeue_pending | |
| (vk, | |
| &vk->to_v_msg_chan, | |
| q_num, | |
| get_msg_id(&entry->to_v_msg[0])); | |
| goto write_free_ent; | |
| } | |
| return count; | |
| write_free_msgid: | |
| bcm_vk_msgid_bitmap_clear(vk, get_msg_id(&entry->to_v_msg[0]), 1); | |
| write_free_ent: | |
| kfree(entry); | |
| write_err: | |
| return rc; | |
| } | |
| __poll_t bcm_vk_poll(struct file *p_file, struct poll_table_struct *wait) | |
| { | |
| __poll_t ret = 0; | |
| int cnt; | |
| struct bcm_vk_ctx *ctx = p_file->private_data; | |
| struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev); | |
| struct device *dev = &vk->pdev->dev; | |
| poll_wait(p_file, &ctx->rd_wq, wait); | |
| cnt = atomic_read(&ctx->pend_cnt); | |
| if (cnt) { | |
| ret = (__force __poll_t)(POLLIN | POLLRDNORM); | |
| if (cnt < 0) { | |
| dev_err(dev, "Error cnt %d, setting back to 0", cnt); | |
| atomic_set(&ctx->pend_cnt, 0); | |
| } | |
| } | |
| return ret; | |
| } | |
| int bcm_vk_release(struct inode *inode, struct file *p_file) | |
| { | |
| int ret; | |
| struct bcm_vk_ctx *ctx = p_file->private_data; | |
| struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev); | |
| struct device *dev = &vk->pdev->dev; | |
| pid_t pid = ctx->pid; | |
| int dma_cnt; | |
| unsigned long timeout, start_time; | |
| /* | |
| * if there are outstanding DMA transactions, need to delay long enough | |
| * to ensure that the card side would have stopped touching the host buffer | |
| * and its SGL list. A race condition could happen if the host app is killed | |
| * abruptly, eg kill -9, while some DMA transfer orders are still inflight. | |
| * Nothing could be done except for a delay as host side is running in a | |
| * completely async fashion. | |
| */ | |
| start_time = jiffies; | |
| timeout = start_time + msecs_to_jiffies(BCM_VK_DMA_DRAIN_MAX_MS); | |
| do { | |
| if (time_after(jiffies, timeout)) { | |
| dev_warn(dev, "%d dma still pending for [fd-%d] pid %d\n", | |
| dma_cnt, ctx->idx, pid); | |
| break; | |
| } | |
| dma_cnt = atomic_read(&ctx->dma_cnt); | |
| cpu_relax(); | |
| cond_resched(); | |
| } while (dma_cnt); | |
| dev_dbg(dev, "Draining for [fd-%d] pid %d - delay %d ms\n", | |
| ctx->idx, pid, jiffies_to_msecs(jiffies - start_time)); | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_v_msg_chan, ctx); | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_h_msg_chan, ctx); | |
| ret = bcm_vk_free_ctx(vk, ctx); | |
| if (ret == 0) | |
| ret = bcm_vk_handle_last_sess(vk, pid, ctx->q_num); | |
| else | |
| ret = 0; | |
| kref_put(&vk->kref, bcm_vk_release_data); | |
| return ret; | |
| } | |
| int bcm_vk_msg_init(struct bcm_vk *vk) | |
| { | |
| struct device *dev = &vk->pdev->dev; | |
| int ret; | |
| if (bcm_vk_data_init(vk)) { | |
| dev_err(dev, "Error initializing internal data structures\n"); | |
| return -EINVAL; | |
| } | |
| if (bcm_vk_msg_chan_init(&vk->to_v_msg_chan) || | |
| bcm_vk_msg_chan_init(&vk->to_h_msg_chan)) { | |
| dev_err(dev, "Error initializing communication channel\n"); | |
| return -EIO; | |
| } | |
| /* read msgq info if ready */ | |
| ret = bcm_vk_sync_msgq(vk, false); | |
| if (ret && (ret != -EAGAIN)) { | |
| dev_err(dev, "Error reading comm msg Q info\n"); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| void bcm_vk_msg_remove(struct bcm_vk *vk) | |
| { | |
| bcm_vk_blk_drv_access(vk); | |
| /* drain all pending items */ | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_v_msg_chan, NULL); | |
| bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_h_msg_chan, NULL); | |
| } |