| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * I2C access driver for the following TI PMICs: | |
| * - LP8764 | |
| * - TPS65224 | |
| * - TPS652G1 | |
| * - TPS6593 | |
| * - TPS6594 | |
| * | |
| * Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/ | |
| */ | |
| #include <linux/crc8.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/of_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/mfd/tps6594.h> | |
| static bool enable_crc; | |
| module_param(enable_crc, bool, 0444); | |
| MODULE_PARM_DESC(enable_crc, "Enable CRC feature for I2C interface"); | |
| DECLARE_CRC8_TABLE(tps6594_i2c_crc_table); | |
| static int tps6594_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) | |
| { | |
| int ret = i2c_transfer(adap, msgs, num); | |
| if (ret == num) | |
| return 0; | |
| else if (ret < 0) | |
| return ret; | |
| else | |
| return -EIO; | |
| } | |
| static int tps6594_i2c_reg_read_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 *val) | |
| { | |
| struct i2c_msg msgs[2]; | |
| u8 buf_rx[] = { 0, 0 }; | |
| /* I2C address = I2C base address + Page index */ | |
| const u8 addr = client->addr + page; | |
| /* | |
| * CRC is calculated from every bit included in the protocol | |
| * except the ACK bits from the target. Byte stream is: | |
| * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 | |
| * - B1: reg | |
| * - B2: (I2C_addr_7bits << 1) | RD_bit, with RD_bit = 1 | |
| * - B3: val | |
| * - B4: CRC from B0-B1-B2-B3 | |
| */ | |
| u8 crc_data[] = { addr << 1, reg, addr << 1 | 1, 0 }; | |
| int ret; | |
| /* Write register */ | |
| msgs[0].addr = addr; | |
| msgs[0].flags = 0; | |
| msgs[0].len = 1; | |
| msgs[0].buf = ® | |
| /* Read data and CRC */ | |
| msgs[1].addr = msgs[0].addr; | |
| msgs[1].flags = I2C_M_RD; | |
| msgs[1].len = 2; | |
| msgs[1].buf = buf_rx; | |
| ret = tps6594_i2c_transfer(client->adapter, msgs, 2); | |
| if (ret < 0) | |
| return ret; | |
| crc_data[sizeof(crc_data) - 1] = *val = buf_rx[0]; | |
| if (buf_rx[1] != crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE)) | |
| return -EIO; | |
| return ret; | |
| } | |
| static int tps6594_i2c_reg_write_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 val) | |
| { | |
| struct i2c_msg msg; | |
| u8 buf[] = { reg, val, 0 }; | |
| /* I2C address = I2C base address + Page index */ | |
| const u8 addr = client->addr + page; | |
| /* | |
| * CRC is calculated from every bit included in the protocol | |
| * except the ACK bits from the target. Byte stream is: | |
| * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 | |
| * - B1: reg | |
| * - B2: val | |
| * - B3: CRC from B0-B1-B2 | |
| */ | |
| const u8 crc_data[] = { addr << 1, reg, val }; | |
| /* Write register, data and CRC */ | |
| msg.addr = addr; | |
| msg.flags = client->flags & I2C_M_TEN; | |
| msg.len = sizeof(buf); | |
| msg.buf = buf; | |
| buf[msg.len - 1] = crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE); | |
| return tps6594_i2c_transfer(client->adapter, &msg, 1); | |
| } | |
| static int tps6594_i2c_read(void *context, const void *reg_buf, size_t reg_size, | |
| void *val_buf, size_t val_size) | |
| { | |
| struct i2c_client *client = context; | |
| struct tps6594 *tps = i2c_get_clientdata(client); | |
| struct i2c_msg msgs[2]; | |
| const u8 *reg_bytes = reg_buf; | |
| u8 *val_bytes = val_buf; | |
| const u8 page = reg_bytes[1]; | |
| u8 reg = reg_bytes[0]; | |
| int ret = 0; | |
| int i; | |
| if (tps->use_crc) { | |
| /* | |
| * Auto-increment feature does not support CRC protocol. | |
| * Converts the bulk read operation into a series of single read operations. | |
| */ | |
| for (i = 0 ; ret == 0 && i < val_size ; i++) | |
| ret = tps6594_i2c_reg_read_with_crc(client, page, reg + i, val_bytes + i); | |
| return ret; | |
| } | |
| /* Write register: I2C address = I2C base address + Page index */ | |
| msgs[0].addr = client->addr + page; | |
| msgs[0].flags = 0; | |
| msgs[0].len = 1; | |
| msgs[0].buf = ® | |
| /* Read data */ | |
| msgs[1].addr = msgs[0].addr; | |
| msgs[1].flags = I2C_M_RD; | |
| msgs[1].len = val_size; | |
| msgs[1].buf = val_bytes; | |
| return tps6594_i2c_transfer(client->adapter, msgs, 2); | |
| } | |
| static int tps6594_i2c_write(void *context, const void *data, size_t count) | |
| { | |
| struct i2c_client *client = context; | |
| struct tps6594 *tps = i2c_get_clientdata(client); | |
| struct i2c_msg msg; | |
| const u8 *bytes = data; | |
| u8 *buf; | |
| const u8 page = bytes[1]; | |
| const u8 reg = bytes[0]; | |
| int ret = 0; | |
| int i; | |
| if (tps->use_crc) { | |
| /* | |
| * Auto-increment feature does not support CRC protocol. | |
| * Converts the bulk write operation into a series of single write operations. | |
| */ | |
| for (i = 0 ; ret == 0 && i < count - 2 ; i++) | |
| ret = tps6594_i2c_reg_write_with_crc(client, page, reg + i, bytes[i + 2]); | |
| return ret; | |
| } | |
| /* Setup buffer: page byte is not sent */ | |
| buf = kzalloc(--count, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| buf[0] = reg; | |
| for (i = 0 ; i < count - 1 ; i++) | |
| buf[i + 1] = bytes[i + 2]; | |
| /* Write register and data: I2C address = I2C base address + Page index */ | |
| msg.addr = client->addr + page; | |
| msg.flags = client->flags & I2C_M_TEN; | |
| msg.len = count; | |
| msg.buf = buf; | |
| ret = tps6594_i2c_transfer(client->adapter, &msg, 1); | |
| kfree(buf); | |
| return ret; | |
| } | |
| static struct regmap_config tps6594_i2c_regmap_config = { | |
| .reg_bits = 16, | |
| .val_bits = 8, | |
| .max_register = TPS6594_REG_DWD_FAIL_CNT_REG, | |
| .volatile_table = &tps6594_volatile_table, | |
| .read = tps6594_i2c_read, | |
| .write = tps6594_i2c_write, | |
| }; | |
| static const struct of_device_id tps6594_i2c_of_match_table[] = { | |
| { .compatible = "ti,tps6594-q1", .data = (void *)TPS6594, }, | |
| { .compatible = "ti,tps6593-q1", .data = (void *)TPS6593, }, | |
| { .compatible = "ti,lp8764-q1", .data = (void *)LP8764, }, | |
| { .compatible = "ti,tps65224-q1", .data = (void *)TPS65224, }, | |
| { .compatible = "ti,tps652g1", .data = (void *)TPS652G1, }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, tps6594_i2c_of_match_table); | |
| static int tps6594_i2c_probe(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| struct tps6594 *tps; | |
| const struct of_device_id *match; | |
| tps = devm_kzalloc(dev, sizeof(*tps), GFP_KERNEL); | |
| if (!tps) | |
| return -ENOMEM; | |
| i2c_set_clientdata(client, tps); | |
| tps->dev = dev; | |
| tps->reg = client->addr; | |
| tps->irq = client->irq; | |
| match = of_match_device(tps6594_i2c_of_match_table, dev); | |
| if (!match) | |
| return dev_err_probe(dev, -EINVAL, "Failed to find matching chip ID\n"); | |
| tps->chip_id = (unsigned long)match->data; | |
| if (tps->chip_id == TPS65224 || tps->chip_id == TPS652G1) | |
| tps6594_i2c_regmap_config.volatile_table = &tps65224_volatile_table; | |
| tps->regmap = devm_regmap_init(dev, NULL, client, &tps6594_i2c_regmap_config); | |
| if (IS_ERR(tps->regmap)) | |
| return dev_err_probe(dev, PTR_ERR(tps->regmap), "Failed to init regmap\n"); | |
| crc8_populate_msb(tps6594_i2c_crc_table, TPS6594_CRC8_POLYNOMIAL); | |
| return tps6594_device_init(tps, enable_crc); | |
| } | |
| static struct i2c_driver tps6594_i2c_driver = { | |
| .driver = { | |
| .name = "tps6594", | |
| .of_match_table = tps6594_i2c_of_match_table, | |
| }, | |
| .probe = tps6594_i2c_probe, | |
| }; | |
| module_i2c_driver(tps6594_i2c_driver); | |
| MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>"); | |
| MODULE_DESCRIPTION("I2C Interface Driver for TPS65224, TPS6594/3, and LP8764"); | |
| MODULE_LICENSE("GPL"); |