| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * I2C driver for the X-Powers' Power Management ICs | |
| * | |
| * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC | |
| * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature | |
| * as well as configurable GPIOs. | |
| * | |
| * This driver supports the I2C variants. | |
| * | |
| * Copyright (C) 2014 Carlo Caione | |
| * | |
| * Author: Carlo Caione <carlo@caione.org> | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/mfd/axp20x.h> | |
| #include <linux/of.h> | |
| #include <linux/regmap.h> | |
| #include <linux/slab.h> | |
| static int axp20x_i2c_probe(struct i2c_client *i2c) | |
| { | |
| struct axp20x_dev *axp20x; | |
| int ret; | |
| axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); | |
| if (!axp20x) | |
| return -ENOMEM; | |
| axp20x->dev = &i2c->dev; | |
| axp20x->irq = i2c->irq; | |
| dev_set_drvdata(axp20x->dev, axp20x); | |
| ret = axp20x_match_device(axp20x); | |
| if (ret) | |
| return ret; | |
| axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); | |
| if (IS_ERR(axp20x->regmap)) { | |
| ret = PTR_ERR(axp20x->regmap); | |
| dev_err(&i2c->dev, "regmap init failed: %d\n", ret); | |
| return ret; | |
| } | |
| return axp20x_device_probe(axp20x); | |
| } | |
| static void axp20x_i2c_remove(struct i2c_client *i2c) | |
| { | |
| struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); | |
| axp20x_device_remove(axp20x); | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id axp20x_i2c_of_match[] = { | |
| { .compatible = "x-powers,axp152", .data = (void *)AXP152_ID }, | |
| { .compatible = "x-powers,axp192", .data = (void *)AXP192_ID }, | |
| { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, | |
| { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, | |
| { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, | |
| { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, | |
| { .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID }, | |
| { .compatible = "x-powers,axp323", .data = (void *)AXP323_ID }, | |
| { .compatible = "x-powers,axp717", .data = (void *)AXP717_ID }, | |
| { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, | |
| { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, | |
| { .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match); | |
| #endif | |
| static const struct i2c_device_id axp20x_i2c_id[] = { | |
| { "axp152" }, | |
| { "axp192" }, | |
| { "axp202" }, | |
| { "axp209" }, | |
| { "axp221" }, | |
| { "axp223" }, | |
| { "axp313a" }, | |
| { "axp717" }, | |
| { "axp803" }, | |
| { "axp806" }, | |
| { "axp15060" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id axp20x_i2c_acpi_match[] = { | |
| { | |
| .id = "INT33F4", | |
| .driver_data = AXP288_ID, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match); | |
| #endif | |
| static struct i2c_driver axp20x_i2c_driver = { | |
| .driver = { | |
| .name = "axp20x-i2c", | |
| .of_match_table = of_match_ptr(axp20x_i2c_of_match), | |
| .acpi_match_table = ACPI_PTR(axp20x_i2c_acpi_match), | |
| }, | |
| .probe = axp20x_i2c_probe, | |
| .remove = axp20x_i2c_remove, | |
| .id_table = axp20x_i2c_id, | |
| }; | |
| module_i2c_driver(axp20x_i2c_driver); | |
| MODULE_DESCRIPTION("PMIC MFD I2C driver for AXP20X"); | |
| MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); | |
| MODULE_LICENSE("GPL"); |