| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * vimc-sensor.c Virtual Media Controller Driver | |
| * | |
| * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> | |
| */ | |
| #include <linux/v4l2-mediabus.h> | |
| #include <linux/vmalloc.h> | |
| #include <media/v4l2-ctrls.h> | |
| #include <media/v4l2-event.h> | |
| #include <media/v4l2-subdev.h> | |
| #include <media/tpg/v4l2-tpg.h> | |
| #include "vimc-common.h" | |
| static const struct v4l2_mbus_framefmt fmt_default = { | |
| .width = 640, | |
| .height = 480, | |
| .code = MEDIA_BUS_FMT_RGB888_1X24, | |
| .field = V4L2_FIELD_NONE, | |
| .colorspace = V4L2_COLORSPACE_SRGB, | |
| }; | |
| static int vimc_sensor_init_state(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(sd, struct vimc_sensor_device, sd); | |
| struct v4l2_mbus_framefmt *mf; | |
| mf = v4l2_subdev_state_get_format(sd_state, 0); | |
| *mf = fmt_default; | |
| vsensor->hw.size.width = fmt_default.width; | |
| vsensor->hw.size.height = fmt_default.height; | |
| return 0; | |
| } | |
| static int vimc_sensor_enum_mbus_code(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_mbus_code_enum *code) | |
| { | |
| u32 mbus_code = vimc_mbus_code_by_index(code->index); | |
| if (!mbus_code) | |
| return -EINVAL; | |
| code->code = mbus_code; | |
| return 0; | |
| } | |
| static int vimc_sensor_enum_frame_size(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_frame_size_enum *fse) | |
| { | |
| const struct vimc_pix_map *vpix; | |
| if (fse->index) | |
| return -EINVAL; | |
| /* Only accept code in the pix map table */ | |
| vpix = vimc_pix_map_by_code(fse->code); | |
| if (!vpix) | |
| return -EINVAL; | |
| fse->min_width = VIMC_FRAME_MIN_WIDTH; | |
| fse->max_width = VIMC_FRAME_MAX_WIDTH; | |
| fse->min_height = VIMC_FRAME_MIN_HEIGHT; | |
| fse->max_height = VIMC_FRAME_MAX_HEIGHT; | |
| return 0; | |
| } | |
| static void vimc_sensor_tpg_s_format(struct vimc_sensor_device *vsensor, | |
| const struct v4l2_mbus_framefmt *format) | |
| { | |
| const struct vimc_pix_map *vpix = vimc_pix_map_by_code(format->code); | |
| tpg_reset_source(&vsensor->tpg, format->width, format->height, | |
| format->field); | |
| tpg_s_bytesperline(&vsensor->tpg, 0, format->width * vpix->bpp); | |
| tpg_s_buf_height(&vsensor->tpg, format->height); | |
| tpg_s_fourcc(&vsensor->tpg, vpix->pixelformat); | |
| /* TODO: add support for V4L2_FIELD_ALTERNATE */ | |
| tpg_s_field(&vsensor->tpg, format->field, false); | |
| tpg_s_colorspace(&vsensor->tpg, format->colorspace); | |
| tpg_s_ycbcr_enc(&vsensor->tpg, format->ycbcr_enc); | |
| tpg_s_quantization(&vsensor->tpg, format->quantization); | |
| tpg_s_xfer_func(&vsensor->tpg, format->xfer_func); | |
| } | |
| static void vimc_sensor_update_frame_timing(struct v4l2_subdev *sd, | |
| u32 width, u32 height) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(sd, struct vimc_sensor_device, sd); | |
| u64 pixel_rate = vsensor->pixel_rate->val; | |
| u32 hts = width + vsensor->hblank->val; | |
| u32 vts = height + vsensor->vblank->val; | |
| u64 total_pixels = (u64)hts * vts; | |
| u64 frame_interval_ns; | |
| /* Sanity check, pixel rate is fixed and fits in 32 bits. */ | |
| if (WARN_ON(pixel_rate >= 0x100000000)) | |
| return; | |
| frame_interval_ns = total_pixels * NSEC_PER_SEC; | |
| do_div(frame_interval_ns, (u32)pixel_rate); | |
| vsensor->hw.fps_jiffies = nsecs_to_jiffies(frame_interval_ns); | |
| if (vsensor->hw.fps_jiffies == 0) | |
| vsensor->hw.fps_jiffies = 1; | |
| } | |
| static void vimc_sensor_adjust_fmt(struct v4l2_mbus_framefmt *fmt) | |
| { | |
| const struct vimc_pix_map *vpix; | |
| /* Only accept code in the pix map table */ | |
| vpix = vimc_pix_map_by_code(fmt->code); | |
| if (!vpix) | |
| fmt->code = fmt_default.code; | |
| fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH, | |
| VIMC_FRAME_MAX_WIDTH) & ~1; | |
| fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT, | |
| VIMC_FRAME_MAX_HEIGHT) & ~1; | |
| /* TODO: add support for V4L2_FIELD_ALTERNATE */ | |
| if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE) | |
| fmt->field = fmt_default.field; | |
| vimc_colorimetry_clamp(fmt); | |
| } | |
| static u32 vimc_calc_vblank(u32 width, u32 height, | |
| s64 pixel_rate, s32 hblank) | |
| { | |
| u32 hts = width + hblank; | |
| u32 target_fps; | |
| u64 vts; | |
| target_fps = (width * height <= VIMC_PIXELS_THRESHOLD_30FPS) ? 30 : 10; | |
| vts = (u64)pixel_rate; | |
| do_div(vts, target_fps * hts); | |
| if (vts > height) | |
| return clamp((u32)(vts - height), VIMC_VBLANK_MIN, VIMC_VBLANK_MAX); | |
| return VIMC_VBLANK_MIN; | |
| } | |
| static int vimc_sensor_set_fmt(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *fmt) | |
| { | |
| struct vimc_sensor_device *vsensor = v4l2_get_subdevdata(sd); | |
| struct v4l2_mbus_framefmt *mf; | |
| /* Do not change the format while stream is on */ | |
| if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE && vsensor->frame) | |
| return -EBUSY; | |
| mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); | |
| /* Set the new format */ | |
| vimc_sensor_adjust_fmt(&fmt->format); | |
| dev_dbg(vsensor->ved.dev, "%s: format update: " | |
| "old:%dx%d (0x%x, %d, %d, %d, %d) " | |
| "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsensor->sd.name, | |
| /* old */ | |
| mf->width, mf->height, mf->code, | |
| mf->colorspace, mf->quantization, | |
| mf->xfer_func, mf->ycbcr_enc, | |
| /* new */ | |
| fmt->format.width, fmt->format.height, fmt->format.code, | |
| fmt->format.colorspace, fmt->format.quantization, | |
| fmt->format.xfer_func, fmt->format.ycbcr_enc); | |
| *mf = fmt->format; | |
| if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { | |
| u32 vblank_def = vimc_calc_vblank(fmt->format.width, | |
| fmt->format.height, | |
| vsensor->pixel_rate->val, | |
| vsensor->hblank->val); | |
| vsensor->hw.size.width = fmt->format.width; | |
| vsensor->hw.size.height = fmt->format.height; | |
| __v4l2_ctrl_modify_range(vsensor->vblank, | |
| VIMC_VBLANK_MIN, | |
| VIMC_VBLANK_MAX, | |
| VIMC_VBLANK_STEP, | |
| vblank_def); | |
| __v4l2_ctrl_s_ctrl(vsensor->vblank, vblank_def); | |
| } | |
| return 0; | |
| } | |
| static const struct v4l2_subdev_pad_ops vimc_sensor_pad_ops = { | |
| .enum_mbus_code = vimc_sensor_enum_mbus_code, | |
| .enum_frame_size = vimc_sensor_enum_frame_size, | |
| .get_fmt = v4l2_subdev_get_fmt, | |
| .set_fmt = vimc_sensor_set_fmt, | |
| }; | |
| static void *vimc_sensor_process_frame(struct vimc_ent_device *ved, | |
| const void *sink_frame) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(ved, struct vimc_sensor_device, ved); | |
| const unsigned int line_height = 16; | |
| u8 *basep[TPG_MAX_PLANES][2]; | |
| unsigned int line = 1; | |
| char str[100]; | |
| tpg_fill_plane_buffer(&vsensor->tpg, 0, 0, vsensor->frame); | |
| tpg_calc_text_basep(&vsensor->tpg, basep, 0, vsensor->frame); | |
| switch (vsensor->hw.osd_value) { | |
| case VIMC_SENSOR_OSD_SHOW_ALL: { | |
| const char *order = tpg_g_color_order(&vsensor->tpg); | |
| tpg_gen_text(&vsensor->tpg, basep, line++ * line_height, | |
| 16, order); | |
| snprintf(str, sizeof(str), | |
| "brightness %3d, contrast %3d, saturation %3d, hue %d ", | |
| vsensor->tpg.brightness, | |
| vsensor->tpg.contrast, | |
| vsensor->tpg.saturation, | |
| vsensor->tpg.hue); | |
| tpg_gen_text(&vsensor->tpg, basep, line++ * line_height, 16, str); | |
| snprintf(str, sizeof(str), "sensor size: %dx%d", | |
| vsensor->hw.size.width, vsensor->hw.size.height); | |
| tpg_gen_text(&vsensor->tpg, basep, line++ * line_height, 16, str); | |
| fallthrough; | |
| } | |
| case VIMC_SENSOR_OSD_SHOW_COUNTERS: { | |
| unsigned int ms; | |
| ms = div_u64(ktime_get_ns() - vsensor->hw.start_stream_ts, 1000000); | |
| snprintf(str, sizeof(str), "%02d:%02d:%02d:%03d", | |
| (ms / (60 * 60 * 1000)) % 24, | |
| (ms / (60 * 1000)) % 60, | |
| (ms / 1000) % 60, | |
| ms % 1000); | |
| tpg_gen_text(&vsensor->tpg, basep, line++ * line_height, 16, str); | |
| break; | |
| } | |
| case VIMC_SENSOR_OSD_SHOW_NONE: | |
| default: | |
| break; | |
| } | |
| return vsensor->frame; | |
| } | |
| static int vimc_sensor_s_stream(struct v4l2_subdev *sd, int enable) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(sd, struct vimc_sensor_device, sd); | |
| if (enable) { | |
| const struct v4l2_mbus_framefmt *format; | |
| struct v4l2_subdev_state *state; | |
| const struct vimc_pix_map *vpix; | |
| unsigned int frame_size; | |
| state = v4l2_subdev_lock_and_get_active_state(sd); | |
| format = v4l2_subdev_state_get_format(state, 0); | |
| /* Configure the test pattern generator. */ | |
| vimc_sensor_tpg_s_format(vsensor, format); | |
| /* Calculate the frame size. */ | |
| vpix = vimc_pix_map_by_code(format->code); | |
| frame_size = format->width * vpix->bpp * format->height; | |
| vsensor->hw.size.width = format->width; | |
| vsensor->hw.size.height = format->height; | |
| vimc_sensor_update_frame_timing(sd, format->width, | |
| format->height); | |
| v4l2_subdev_unlock_state(state); | |
| /* | |
| * Allocate the frame buffer. Use vmalloc to be able to | |
| * allocate a large amount of memory | |
| */ | |
| vsensor->frame = vmalloc(frame_size); | |
| if (!vsensor->frame) | |
| return -ENOMEM; | |
| vsensor->hw.start_stream_ts = ktime_get_ns(); | |
| } else { | |
| vfree(vsensor->frame); | |
| vsensor->frame = NULL; | |
| } | |
| return 0; | |
| } | |
| static const struct v4l2_subdev_core_ops vimc_sensor_core_ops = { | |
| .log_status = v4l2_ctrl_subdev_log_status, | |
| .subscribe_event = v4l2_ctrl_subdev_subscribe_event, | |
| .unsubscribe_event = v4l2_event_subdev_unsubscribe, | |
| }; | |
| static const struct v4l2_subdev_video_ops vimc_sensor_video_ops = { | |
| .s_stream = vimc_sensor_s_stream, | |
| }; | |
| static const struct v4l2_subdev_ops vimc_sensor_ops = { | |
| .core = &vimc_sensor_core_ops, | |
| .pad = &vimc_sensor_pad_ops, | |
| .video = &vimc_sensor_video_ops, | |
| }; | |
| static const struct v4l2_subdev_internal_ops vimc_sensor_internal_ops = { | |
| .init_state = vimc_sensor_init_state, | |
| }; | |
| static int vimc_sensor_s_ctrl(struct v4l2_ctrl *ctrl) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(ctrl->handler, struct vimc_sensor_device, hdl); | |
| switch (ctrl->id) { | |
| case VIMC_CID_TEST_PATTERN: | |
| tpg_s_pattern(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_HFLIP: | |
| tpg_s_hflip(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_VFLIP: | |
| tpg_s_vflip(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_BRIGHTNESS: | |
| tpg_s_brightness(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_CONTRAST: | |
| tpg_s_contrast(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_HUE: | |
| tpg_s_hue(&vsensor->tpg, ctrl->val); | |
| break; | |
| case V4L2_CID_SATURATION: | |
| tpg_s_saturation(&vsensor->tpg, ctrl->val); | |
| break; | |
| case VIMC_CID_OSD_TEXT_MODE: | |
| vsensor->hw.osd_value = ctrl->val; | |
| break; | |
| case V4L2_CID_PIXEL_RATE: | |
| break; | |
| case V4L2_CID_HBLANK: | |
| break; | |
| case V4L2_CID_VBLANK: | |
| vimc_sensor_update_frame_timing(&vsensor->sd, | |
| vsensor->hw.size.width, | |
| vsensor->hw.size.height); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static const struct v4l2_ctrl_ops vimc_sensor_ctrl_ops = { | |
| .s_ctrl = vimc_sensor_s_ctrl, | |
| }; | |
| static void vimc_sensor_release(struct vimc_ent_device *ved) | |
| { | |
| struct vimc_sensor_device *vsensor = | |
| container_of(ved, struct vimc_sensor_device, ved); | |
| v4l2_ctrl_handler_free(&vsensor->hdl); | |
| tpg_free(&vsensor->tpg); | |
| v4l2_subdev_cleanup(&vsensor->sd); | |
| media_entity_cleanup(vsensor->ved.ent); | |
| kfree(vsensor); | |
| } | |
| /* Image Processing Controls */ | |
| static const struct v4l2_ctrl_config vimc_sensor_ctrl_class = { | |
| .flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY, | |
| .id = VIMC_CID_VIMC_CLASS, | |
| .name = "VIMC Controls", | |
| .type = V4L2_CTRL_TYPE_CTRL_CLASS, | |
| }; | |
| static const struct v4l2_ctrl_config vimc_sensor_ctrl_test_pattern = { | |
| .ops = &vimc_sensor_ctrl_ops, | |
| .id = VIMC_CID_TEST_PATTERN, | |
| .name = "Test Pattern", | |
| .type = V4L2_CTRL_TYPE_MENU, | |
| .max = TPG_PAT_NOISE, | |
| .qmenu = tpg_pattern_strings, | |
| }; | |
| static const char * const vimc_ctrl_osd_mode_strings[] = { | |
| "All", | |
| "Counters Only", | |
| "None", | |
| NULL, | |
| }; | |
| static const struct v4l2_ctrl_config vimc_sensor_ctrl_osd_mode = { | |
| .ops = &vimc_sensor_ctrl_ops, | |
| .id = VIMC_CID_OSD_TEXT_MODE, | |
| .name = "Show Information", | |
| .type = V4L2_CTRL_TYPE_MENU, | |
| .max = ARRAY_SIZE(vimc_ctrl_osd_mode_strings) - 2, | |
| .qmenu = vimc_ctrl_osd_mode_strings, | |
| }; | |
| static struct vimc_ent_device *vimc_sensor_add(struct vimc_device *vimc, | |
| const char *vcfg_name) | |
| { | |
| struct v4l2_device *v4l2_dev = &vimc->v4l2_dev; | |
| struct vimc_sensor_device *vsensor; | |
| int ret; | |
| /* Allocate the vsensor struct */ | |
| vsensor = kzalloc_obj(*vsensor); | |
| if (!vsensor) | |
| return ERR_PTR(-ENOMEM); | |
| v4l2_ctrl_handler_init(&vsensor->hdl, 4); | |
| v4l2_ctrl_new_custom(&vsensor->hdl, &vimc_sensor_ctrl_class, NULL); | |
| v4l2_ctrl_new_custom(&vsensor->hdl, &vimc_sensor_ctrl_test_pattern, NULL); | |
| v4l2_ctrl_new_custom(&vsensor->hdl, &vimc_sensor_ctrl_osd_mode, NULL); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_VFLIP, 0, 1, 1, 0); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_HFLIP, 0, 1, 1, 0); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_CONTRAST, 0, 255, 1, 128); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_HUE, -128, 127, 1, 0); | |
| v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_SATURATION, 0, 255, 1, 128); | |
| /* Timing controls for frame interval configuration */ | |
| vsensor->pixel_rate = v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_PIXEL_RATE, | |
| VIMC_PIXEL_RATE_FIXED, VIMC_PIXEL_RATE_FIXED, | |
| 1, VIMC_PIXEL_RATE_FIXED); | |
| if (vsensor->pixel_rate) | |
| vsensor->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY; | |
| vsensor->hblank = v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_HBLANK, | |
| VIMC_HBLANK_FIXED, VIMC_HBLANK_FIXED, | |
| 1, VIMC_HBLANK_FIXED); | |
| if (vsensor->hblank) | |
| vsensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; | |
| vsensor->vblank = v4l2_ctrl_new_std(&vsensor->hdl, &vimc_sensor_ctrl_ops, | |
| V4L2_CID_VBLANK, | |
| VIMC_VBLANK_MIN, VIMC_VBLANK_MAX, | |
| VIMC_VBLANK_STEP, VIMC_VBLANK_DEFAULT); | |
| vsensor->sd.ctrl_handler = &vsensor->hdl; | |
| if (vsensor->hdl.error) { | |
| ret = vsensor->hdl.error; | |
| goto err_free_vsensor; | |
| } | |
| /* Initialize the test pattern generator */ | |
| tpg_init(&vsensor->tpg, fmt_default.width, fmt_default.height); | |
| ret = tpg_alloc(&vsensor->tpg, VIMC_FRAME_MAX_WIDTH); | |
| if (ret) | |
| goto err_free_hdl; | |
| /* Initialize ved and sd */ | |
| vsensor->pad.flags = MEDIA_PAD_FL_SOURCE; | |
| ret = vimc_ent_sd_register(&vsensor->ved, &vsensor->sd, v4l2_dev, | |
| vcfg_name, | |
| MEDIA_ENT_F_CAM_SENSOR, 1, &vsensor->pad, | |
| &vimc_sensor_internal_ops, &vimc_sensor_ops); | |
| if (ret) | |
| goto err_free_tpg; | |
| vsensor->ved.process_frame = vimc_sensor_process_frame; | |
| vsensor->ved.dev = vimc->mdev.dev; | |
| return &vsensor->ved; | |
| err_free_tpg: | |
| tpg_free(&vsensor->tpg); | |
| err_free_hdl: | |
| v4l2_ctrl_handler_free(&vsensor->hdl); | |
| err_free_vsensor: | |
| kfree(vsensor); | |
| return ERR_PTR(ret); | |
| } | |
| const struct vimc_ent_type vimc_sensor_type = { | |
| .add = vimc_sensor_add, | |
| .release = vimc_sensor_release | |
| }; |