| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Microchip CSI2 Demux Controller (CSI2DC) driver | |
| * | |
| * Copyright (C) 2018 Microchip Technology, Inc. | |
| * | |
| * Author: Eugen Hristev <eugen.hristev@microchip.com> | |
| * | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/module.h> | |
| #include <linux/of_graph.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/videodev2.h> | |
| #include <media/v4l2-fwnode.h> | |
| #include <media/v4l2-subdev.h> | |
| /* Global configuration register */ | |
| #define CSI2DC_GCFG 0x0 | |
| /* MIPI sensor pixel clock is free running */ | |
| #define CSI2DC_GCFG_MIPIFRN BIT(0) | |
| /* GPIO parallel interface selection */ | |
| #define CSI2DC_GCFG_GPIOSEL BIT(1) | |
| /* Output waveform inter-line minimum delay */ | |
| #define CSI2DC_GCFG_HLC(v) ((v) << 4) | |
| #define CSI2DC_GCFG_HLC_MASK GENMASK(7, 4) | |
| /* SAMA7G5 requires a HLC delay of 15 */ | |
| #define SAMA7G5_HLC (15) | |
| /* Global control register */ | |
| #define CSI2DC_GCTLR 0x04 | |
| #define CSI2DC_GCTLR_SWRST BIT(0) | |
| /* Global status register */ | |
| #define CSI2DC_GS 0x08 | |
| /* SSP interrupt status register */ | |
| #define CSI2DC_SSPIS 0x28 | |
| /* Pipe update register */ | |
| #define CSI2DC_PU 0xc0 | |
| /* Video pipe attributes update */ | |
| #define CSI2DC_PU_VP BIT(0) | |
| /* Pipe update status register */ | |
| #define CSI2DC_PUS 0xc4 | |
| /* Video pipeline Interrupt Status Register */ | |
| #define CSI2DC_VPISR 0xf4 | |
| /* Video pipeline enable register */ | |
| #define CSI2DC_VPE 0xf8 | |
| #define CSI2DC_VPE_ENABLE BIT(0) | |
| /* Video pipeline configuration register */ | |
| #define CSI2DC_VPCFG 0xfc | |
| /* Data type */ | |
| #define CSI2DC_VPCFG_DT(v) ((v) << 0) | |
| #define CSI2DC_VPCFG_DT_MASK GENMASK(5, 0) | |
| /* Virtual channel identifier */ | |
| #define CSI2DC_VPCFG_VC(v) ((v) << 6) | |
| #define CSI2DC_VPCFG_VC_MASK GENMASK(7, 6) | |
| /* Decompression enable */ | |
| #define CSI2DC_VPCFG_DE BIT(8) | |
| /* Decoder mode */ | |
| #define CSI2DC_VPCFG_DM(v) ((v) << 9) | |
| #define CSI2DC_VPCFG_DM_DECODER8TO12 0 | |
| /* Decoder predictor 2 selection */ | |
| #define CSI2DC_VPCFG_DP2 BIT(12) | |
| /* Recommended memory storage */ | |
| #define CSI2DC_VPCFG_RMS BIT(13) | |
| /* Post adjustment */ | |
| #define CSI2DC_VPCFG_PA BIT(14) | |
| /* Video pipeline column register */ | |
| #define CSI2DC_VPCOL 0x100 | |
| /* Column number */ | |
| #define CSI2DC_VPCOL_COL(v) ((v) << 0) | |
| #define CSI2DC_VPCOL_COL_MASK GENMASK(15, 0) | |
| /* Video pipeline row register */ | |
| #define CSI2DC_VPROW 0x104 | |
| /* Row number */ | |
| #define CSI2DC_VPROW_ROW(v) ((v) << 0) | |
| #define CSI2DC_VPROW_ROW_MASK GENMASK(15, 0) | |
| /* Version register */ | |
| #define CSI2DC_VERSION 0x1fc | |
| /* register read/write helpers */ | |
| #define csi2dc_readl(st, reg) readl_relaxed((st)->base + (reg)) | |
| #define csi2dc_writel(st, reg, val) writel_relaxed((val), \ | |
| (st)->base + (reg)) | |
| /* supported RAW data types */ | |
| #define CSI2DC_DT_RAW6 0x28 | |
| #define CSI2DC_DT_RAW7 0x29 | |
| #define CSI2DC_DT_RAW8 0x2a | |
| #define CSI2DC_DT_RAW10 0x2b | |
| #define CSI2DC_DT_RAW12 0x2c | |
| #define CSI2DC_DT_RAW14 0x2d | |
| /* YUV data types */ | |
| #define CSI2DC_DT_YUV422_8B 0x1e | |
| /* | |
| * struct csi2dc_format - CSI2DC format type struct | |
| * @mbus_code: Media bus code for the format | |
| * @dt: Data type constant for this format | |
| */ | |
| struct csi2dc_format { | |
| u32 mbus_code; | |
| u32 dt; | |
| }; | |
| static const struct csi2dc_format csi2dc_formats[] = { | |
| { | |
| .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, | |
| .dt = CSI2DC_DT_RAW8, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, | |
| .dt = CSI2DC_DT_RAW8, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, | |
| .dt = CSI2DC_DT_RAW8, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, | |
| .dt = CSI2DC_DT_RAW8, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, | |
| .dt = CSI2DC_DT_RAW10, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, | |
| .dt = CSI2DC_DT_RAW10, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, | |
| .dt = CSI2DC_DT_RAW10, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, | |
| .dt = CSI2DC_DT_RAW10, | |
| }, { | |
| .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, | |
| .dt = CSI2DC_DT_YUV422_8B, | |
| }, | |
| }; | |
| enum mipi_csi_pads { | |
| CSI2DC_PAD_SINK = 0, | |
| CSI2DC_PAD_SOURCE = 1, | |
| CSI2DC_PADS_NUM = 2, | |
| }; | |
| /* | |
| * struct csi2dc_device - CSI2DC device driver data/config struct | |
| * @base: Register map base address | |
| * @csi2dc_sd: v4l2 subdevice for the csi2dc device | |
| * This is the subdevice that the csi2dc device itself | |
| * registers in v4l2 subsystem | |
| * @dev: struct device for this csi2dc device | |
| * @pclk: Peripheral clock reference | |
| * Input clock that clocks the hardware block internal | |
| * logic | |
| * @scck: Sensor Controller clock reference | |
| * Input clock that is used to generate the pixel clock | |
| * @format: Current saved format used in g/s fmt | |
| * @cur_fmt: Current state format | |
| * @try_fmt: Try format that is being tried | |
| * @pads: Media entity pads for the csi2dc subdevice | |
| * @clk_gated: Whether the clock is gated or free running | |
| * @video_pipe: Whether video pipeline is configured | |
| * @parallel_mode: The underlying subdevice is connected on a parallel bus | |
| * @vc: Current set virtual channel | |
| * @notifier: Async notifier that is used to bound the underlying | |
| * subdevice to the csi2dc subdevice | |
| * @input_sd: Reference to the underlying subdevice bound to the | |
| * csi2dc subdevice | |
| * @remote_pad: Pad number of the underlying subdevice that is linked | |
| * to the csi2dc subdevice sink pad. | |
| */ | |
| struct csi2dc_device { | |
| void __iomem *base; | |
| struct v4l2_subdev csi2dc_sd; | |
| struct device *dev; | |
| struct clk *pclk; | |
| struct clk *scck; | |
| struct v4l2_mbus_framefmt format; | |
| const struct csi2dc_format *cur_fmt; | |
| const struct csi2dc_format *try_fmt; | |
| struct media_pad pads[CSI2DC_PADS_NUM]; | |
| bool clk_gated; | |
| bool video_pipe; | |
| bool parallel_mode; | |
| u32 vc; | |
| struct v4l2_async_notifier notifier; | |
| struct v4l2_subdev *input_sd; | |
| u32 remote_pad; | |
| }; | |
| static inline struct csi2dc_device * | |
| csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd) | |
| { | |
| return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd); | |
| } | |
| static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_mbus_code_enum *code) | |
| { | |
| if (code->index >= ARRAY_SIZE(csi2dc_formats)) | |
| return -EINVAL; | |
| code->code = csi2dc_formats[code->index].mbus_code; | |
| return 0; | |
| } | |
| static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *format) | |
| { | |
| struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd); | |
| struct v4l2_mbus_framefmt *v4l2_try_fmt; | |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) { | |
| v4l2_try_fmt = v4l2_subdev_state_get_format(sd_state, | |
| format->pad); | |
| format->format = *v4l2_try_fmt; | |
| return 0; | |
| } | |
| format->format = csi2dc->format; | |
| return 0; | |
| } | |
| static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *req_fmt) | |
| { | |
| struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd); | |
| const struct csi2dc_format *fmt, *try_fmt = NULL; | |
| struct v4l2_mbus_framefmt *v4l2_try_fmt; | |
| unsigned int i; | |
| /* | |
| * Setting the source pad is disabled. | |
| * The same format is being propagated from the sink to source. | |
| */ | |
| if (req_fmt->pad == CSI2DC_PAD_SOURCE) | |
| return -EINVAL; | |
| for (i = 0; i < ARRAY_SIZE(csi2dc_formats); i++) { | |
| fmt = &csi2dc_formats[i]; | |
| if (req_fmt->format.code == fmt->mbus_code) | |
| try_fmt = fmt; | |
| fmt++; | |
| } | |
| /* in case we could not find the desired format, default to something */ | |
| if (!try_fmt) { | |
| try_fmt = &csi2dc_formats[0]; | |
| dev_dbg(csi2dc->dev, | |
| "CSI2DC unsupported format 0x%x, defaulting to 0x%x\n", | |
| req_fmt->format.code, csi2dc_formats[0].mbus_code); | |
| } | |
| req_fmt->format.code = try_fmt->mbus_code; | |
| req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB; | |
| req_fmt->format.field = V4L2_FIELD_NONE; | |
| if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) { | |
| v4l2_try_fmt = v4l2_subdev_state_get_format(sd_state, | |
| req_fmt->pad); | |
| *v4l2_try_fmt = req_fmt->format; | |
| /* Trying on the sink pad makes the source pad change too */ | |
| v4l2_try_fmt = v4l2_subdev_state_get_format(sd_state, | |
| CSI2DC_PAD_SOURCE); | |
| *v4l2_try_fmt = req_fmt->format; | |
| /* if we are just trying, we are done */ | |
| return 0; | |
| } | |
| /* save the format for later requests */ | |
| csi2dc->format = req_fmt->format; | |
| /* update config */ | |
| csi2dc->cur_fmt = try_fmt; | |
| dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n", | |
| csi2dc->format.code, csi2dc->format.width, | |
| csi2dc->format.height); | |
| return 0; | |
| } | |
| static int csi2dc_power(struct csi2dc_device *csi2dc, int on) | |
| { | |
| int ret = 0; | |
| if (on) { | |
| ret = clk_prepare_enable(csi2dc->pclk); | |
| if (ret) { | |
| dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret); | |
| return ret; | |
| } | |
| ret = clk_prepare_enable(csi2dc->scck); | |
| if (ret) { | |
| dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret); | |
| clk_disable_unprepare(csi2dc->pclk); | |
| return ret; | |
| } | |
| /* if powering up, deassert reset line */ | |
| csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST); | |
| } else { | |
| /* if powering down, assert reset line */ | |
| csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0); | |
| clk_disable_unprepare(csi2dc->scck); | |
| clk_disable_unprepare(csi2dc->pclk); | |
| } | |
| return ret; | |
| } | |
| static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc) | |
| { | |
| struct v4l2_mbus_config mbus_config = { 0 }; | |
| int ret; | |
| ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config, | |
| csi2dc->remote_pad, &mbus_config); | |
| if (ret == -ENOIOCTLCMD) { | |
| dev_dbg(csi2dc->dev, | |
| "no remote mbus configuration available\n"); | |
| return 0; | |
| } | |
| if (ret) { | |
| dev_err(csi2dc->dev, | |
| "failed to get remote mbus configuration\n"); | |
| return 0; | |
| } | |
| dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc); | |
| csi2dc->clk_gated = mbus_config.bus.parallel.flags & | |
| V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK; | |
| dev_dbg(csi2dc->dev, "mbus_config: %s clock\n", | |
| csi2dc->clk_gated ? "gated" : "free running"); | |
| return 0; | |
| } | |
| static void csi2dc_vp_update(struct csi2dc_device *csi2dc) | |
| { | |
| u32 vp, gcfg; | |
| if (!csi2dc->video_pipe) { | |
| dev_err(csi2dc->dev, "video pipeline unavailable\n"); | |
| return; | |
| } | |
| if (csi2dc->parallel_mode) { | |
| /* In parallel mode, GPIO parallel interface must be selected */ | |
| gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG); | |
| gcfg |= CSI2DC_GCFG_GPIOSEL; | |
| csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg); | |
| return; | |
| } | |
| /* serial video pipeline */ | |
| csi2dc_writel(csi2dc, CSI2DC_GCFG, | |
| (SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) | | |
| (csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN)); | |
| vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK; | |
| vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK; | |
| vp &= ~CSI2DC_VPCFG_DE; | |
| vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12); | |
| vp &= ~CSI2DC_VPCFG_DP2; | |
| vp &= ~CSI2DC_VPCFG_RMS; | |
| vp |= CSI2DC_VPCFG_PA; | |
| csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp); | |
| csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE); | |
| csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP); | |
| } | |
| static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable) | |
| { | |
| struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd); | |
| int ret; | |
| if (enable) { | |
| ret = pm_runtime_resume_and_get(csi2dc->dev); | |
| if (ret < 0) | |
| return ret; | |
| csi2dc_get_mbus_config(csi2dc); | |
| csi2dc_vp_update(csi2dc); | |
| return v4l2_subdev_call(csi2dc->input_sd, video, s_stream, | |
| true); | |
| } | |
| dev_dbg(csi2dc->dev, | |
| "Last frame received: VPCOLR = %u, VPROWR= %u, VPISR = %x\n", | |
| csi2dc_readl(csi2dc, CSI2DC_VPCOL), | |
| csi2dc_readl(csi2dc, CSI2DC_VPROW), | |
| csi2dc_readl(csi2dc, CSI2DC_VPISR)); | |
| /* stop streaming scenario */ | |
| ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false); | |
| pm_runtime_put_sync(csi2dc->dev); | |
| return ret; | |
| } | |
| static int csi2dc_init_state(struct v4l2_subdev *csi2dc_sd, | |
| struct v4l2_subdev_state *sd_state) | |
| { | |
| struct v4l2_mbus_framefmt *v4l2_try_fmt = | |
| v4l2_subdev_state_get_format(sd_state, 0); | |
| v4l2_try_fmt->height = 480; | |
| v4l2_try_fmt->width = 640; | |
| v4l2_try_fmt->code = csi2dc_formats[0].mbus_code; | |
| v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB; | |
| v4l2_try_fmt->field = V4L2_FIELD_NONE; | |
| v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; | |
| v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT; | |
| v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; | |
| return 0; | |
| } | |
| static const struct media_entity_operations csi2dc_entity_ops = { | |
| .link_validate = v4l2_subdev_link_validate, | |
| }; | |
| static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = { | |
| .enum_mbus_code = csi2dc_enum_mbus_code, | |
| .set_fmt = csi2dc_set_fmt, | |
| .get_fmt = csi2dc_get_fmt, | |
| }; | |
| static const struct v4l2_subdev_video_ops csi2dc_video_ops = { | |
| .s_stream = csi2dc_s_stream, | |
| }; | |
| static const struct v4l2_subdev_ops csi2dc_subdev_ops = { | |
| .pad = &csi2dc_pad_ops, | |
| .video = &csi2dc_video_ops, | |
| }; | |
| static const struct v4l2_subdev_internal_ops csi2dc_internal_ops = { | |
| .init_state = csi2dc_init_state, | |
| }; | |
| static int csi2dc_async_bound(struct v4l2_async_notifier *notifier, | |
| struct v4l2_subdev *subdev, | |
| struct v4l2_async_connection *asd) | |
| { | |
| struct csi2dc_device *csi2dc = container_of(notifier, | |
| struct csi2dc_device, notifier); | |
| int pad; | |
| int ret; | |
| csi2dc->input_sd = subdev; | |
| pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode, | |
| MEDIA_PAD_FL_SOURCE); | |
| if (pad < 0) { | |
| dev_err(csi2dc->dev, "Failed to find pad for %s\n", | |
| subdev->name); | |
| return pad; | |
| } | |
| csi2dc->remote_pad = pad; | |
| ret = media_create_pad_link(&csi2dc->input_sd->entity, | |
| csi2dc->remote_pad, | |
| &csi2dc->csi2dc_sd.entity, 0, | |
| MEDIA_LNK_FL_ENABLED); | |
| if (ret) { | |
| dev_err(csi2dc->dev, | |
| "Failed to create pad link: %s to %s\n", | |
| csi2dc->input_sd->entity.name, | |
| csi2dc->csi2dc_sd.entity.name); | |
| return ret; | |
| } | |
| dev_dbg(csi2dc->dev, "link with %s pad: %d\n", | |
| csi2dc->input_sd->name, csi2dc->remote_pad); | |
| return ret; | |
| } | |
| static const struct v4l2_async_notifier_operations csi2dc_async_ops = { | |
| .bound = csi2dc_async_bound, | |
| }; | |
| static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc, | |
| struct fwnode_handle *input_fwnode) | |
| { | |
| struct v4l2_async_connection *asd; | |
| int ret = 0; | |
| v4l2_async_subdev_nf_init(&csi2dc->notifier, &csi2dc->csi2dc_sd); | |
| asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier, | |
| input_fwnode, | |
| struct v4l2_async_connection); | |
| fwnode_handle_put(input_fwnode); | |
| if (IS_ERR(asd)) { | |
| ret = PTR_ERR(asd); | |
| dev_err(csi2dc->dev, | |
| "failed to add async notifier for node %pOF: %d\n", | |
| to_of_node(input_fwnode), ret); | |
| v4l2_async_nf_cleanup(&csi2dc->notifier); | |
| return ret; | |
| } | |
| csi2dc->notifier.ops = &csi2dc_async_ops; | |
| ret = v4l2_async_nf_register(&csi2dc->notifier); | |
| if (ret) { | |
| dev_err(csi2dc->dev, "fail to register async notifier: %d\n", | |
| ret); | |
| v4l2_async_nf_cleanup(&csi2dc->notifier); | |
| } | |
| return ret; | |
| } | |
| static int csi2dc_of_parse(struct csi2dc_device *csi2dc, | |
| struct device_node *of_node) | |
| { | |
| struct fwnode_handle *input_fwnode, *output_fwnode; | |
| struct v4l2_fwnode_endpoint input_endpoint = { 0 }, | |
| output_endpoint = { 0 }; | |
| int ret; | |
| input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node), | |
| NULL); | |
| if (!input_fwnode) { | |
| dev_err(csi2dc->dev, | |
| "missing port node at %pOF, input node is mandatory.\n", | |
| of_node); | |
| return -EINVAL; | |
| } | |
| ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint); | |
| if (ret) { | |
| dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node); | |
| goto csi2dc_of_parse_err; | |
| } | |
| if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL || | |
| input_endpoint.bus_type == V4L2_MBUS_BT656) { | |
| csi2dc->parallel_mode = true; | |
| dev_dbg(csi2dc->dev, | |
| "subdevice connected on parallel interface\n"); | |
| } | |
| if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) { | |
| csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags & | |
| V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK; | |
| dev_dbg(csi2dc->dev, | |
| "subdevice connected on serial interface\n"); | |
| dev_dbg(csi2dc->dev, "DT: %s clock\n", | |
| csi2dc->clk_gated ? "gated" : "free running"); | |
| } | |
| output_fwnode = fwnode_graph_get_next_endpoint | |
| (of_fwnode_handle(of_node), input_fwnode); | |
| if (output_fwnode) | |
| ret = v4l2_fwnode_endpoint_parse(output_fwnode, | |
| &output_endpoint); | |
| fwnode_handle_put(output_fwnode); | |
| if (!output_fwnode || ret) { | |
| dev_info(csi2dc->dev, | |
| "missing output node at %pOF, data pipe available only.\n", | |
| of_node); | |
| } else { | |
| if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL && | |
| output_endpoint.bus_type != V4L2_MBUS_BT656) { | |
| dev_err(csi2dc->dev, | |
| "output port must be parallel/bt656.\n"); | |
| ret = -EINVAL; | |
| goto csi2dc_of_parse_err; | |
| } | |
| csi2dc->video_pipe = true; | |
| dev_dbg(csi2dc->dev, | |
| "block %pOF [%d.%d]->[%d.%d] video pipeline\n", | |
| of_node, input_endpoint.base.port, | |
| input_endpoint.base.id, output_endpoint.base.port, | |
| output_endpoint.base.id); | |
| } | |
| /* prepare async notifier for subdevice completion */ | |
| return csi2dc_prepare_notifier(csi2dc, input_fwnode); | |
| csi2dc_of_parse_err: | |
| fwnode_handle_put(input_fwnode); | |
| return ret; | |
| } | |
| static void csi2dc_default_format(struct csi2dc_device *csi2dc) | |
| { | |
| csi2dc->cur_fmt = &csi2dc_formats[0]; | |
| csi2dc->format.height = 480; | |
| csi2dc->format.width = 640; | |
| csi2dc->format.code = csi2dc_formats[0].mbus_code; | |
| csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB; | |
| csi2dc->format.field = V4L2_FIELD_NONE; | |
| csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; | |
| csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT; | |
| csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; | |
| } | |
| static int csi2dc_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct csi2dc_device *csi2dc; | |
| int ret = 0; | |
| u32 ver; | |
| csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL); | |
| if (!csi2dc) | |
| return -ENOMEM; | |
| csi2dc->dev = dev; | |
| csi2dc->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(csi2dc->base)) { | |
| dev_err(dev, "base address not set\n"); | |
| return PTR_ERR(csi2dc->base); | |
| } | |
| csi2dc->pclk = devm_clk_get(dev, "pclk"); | |
| if (IS_ERR(csi2dc->pclk)) { | |
| ret = PTR_ERR(csi2dc->pclk); | |
| dev_err(dev, "failed to get pclk: %d\n", ret); | |
| return ret; | |
| } | |
| csi2dc->scck = devm_clk_get(dev, "scck"); | |
| if (IS_ERR(csi2dc->scck)) { | |
| ret = PTR_ERR(csi2dc->scck); | |
| dev_err(dev, "failed to get scck: %d\n", ret); | |
| return ret; | |
| } | |
| v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops); | |
| csi2dc->csi2dc_sd.internal_ops = &csi2dc_internal_ops; | |
| csi2dc->csi2dc_sd.owner = THIS_MODULE; | |
| csi2dc->csi2dc_sd.dev = dev; | |
| snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name), | |
| "csi2dc"); | |
| csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | |
| csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; | |
| csi2dc->csi2dc_sd.entity.ops = &csi2dc_entity_ops; | |
| platform_set_drvdata(pdev, csi2dc); | |
| ret = csi2dc_of_parse(csi2dc, dev->of_node); | |
| if (ret) | |
| goto csi2dc_probe_cleanup_entity; | |
| csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK; | |
| if (csi2dc->video_pipe) | |
| csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; | |
| ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity, | |
| csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1, | |
| csi2dc->pads); | |
| if (ret < 0) { | |
| dev_err(dev, "media entity init failed\n"); | |
| goto csi2dc_probe_cleanup_notifier; | |
| } | |
| csi2dc_default_format(csi2dc); | |
| /* turn power on to validate capabilities */ | |
| ret = csi2dc_power(csi2dc, true); | |
| if (ret < 0) | |
| goto csi2dc_probe_cleanup_notifier; | |
| pm_runtime_set_active(dev); | |
| pm_runtime_enable(dev); | |
| ver = csi2dc_readl(csi2dc, CSI2DC_VERSION); | |
| /* | |
| * we must register the subdev after PM runtime has been requested, | |
| * otherwise we might bound immediately and request pm_runtime_resume | |
| * before runtime_enable. | |
| */ | |
| ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd); | |
| if (ret) { | |
| dev_err(csi2dc->dev, "failed to register the subdevice\n"); | |
| goto csi2dc_probe_cleanup_notifier; | |
| } | |
| dev_info(dev, "Microchip CSI2DC version %x\n", ver); | |
| return 0; | |
| csi2dc_probe_cleanup_notifier: | |
| v4l2_async_nf_cleanup(&csi2dc->notifier); | |
| csi2dc_probe_cleanup_entity: | |
| media_entity_cleanup(&csi2dc->csi2dc_sd.entity); | |
| return ret; | |
| } | |
| static void csi2dc_remove(struct platform_device *pdev) | |
| { | |
| struct csi2dc_device *csi2dc = platform_get_drvdata(pdev); | |
| pm_runtime_disable(&pdev->dev); | |
| v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd); | |
| v4l2_async_nf_unregister(&csi2dc->notifier); | |
| v4l2_async_nf_cleanup(&csi2dc->notifier); | |
| media_entity_cleanup(&csi2dc->csi2dc_sd.entity); | |
| } | |
| static int __maybe_unused csi2dc_runtime_suspend(struct device *dev) | |
| { | |
| struct csi2dc_device *csi2dc = dev_get_drvdata(dev); | |
| return csi2dc_power(csi2dc, false); | |
| } | |
| static int __maybe_unused csi2dc_runtime_resume(struct device *dev) | |
| { | |
| struct csi2dc_device *csi2dc = dev_get_drvdata(dev); | |
| return csi2dc_power(csi2dc, true); | |
| } | |
| static const struct dev_pm_ops csi2dc_dev_pm_ops = { | |
| SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL) | |
| }; | |
| static const struct of_device_id csi2dc_of_match[] = { | |
| { .compatible = "microchip,sama7g5-csi2dc" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, csi2dc_of_match); | |
| static struct platform_driver csi2dc_driver = { | |
| .probe = csi2dc_probe, | |
| .remove = csi2dc_remove, | |
| .driver = { | |
| .name = "microchip-csi2dc", | |
| .pm = &csi2dc_dev_pm_ops, | |
| .of_match_table = of_match_ptr(csi2dc_of_match), | |
| }, | |
| }; | |
| module_platform_driver(csi2dc_driver); | |
| MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>"); | |
| MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver"); | |
| MODULE_LICENSE("GPL v2"); |