| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * adv7175 - adv7175a video encoder driver version 0.0.3 | |
| * | |
| * Copyright (C) 1998 Dave Perks <dperks@ibm.net> | |
| * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> | |
| * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> | |
| * - some corrections for Pinnacle Systems Inc. DC10plus card. | |
| * | |
| * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> | |
| * - moved over to linux>=2.4.x i2c protocol (9/9/2002) | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/i2c.h> | |
| #include <linux/videodev2.h> | |
| #include <media/v4l2-device.h> | |
| MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); | |
| MODULE_AUTHOR("Dave Perks"); | |
| MODULE_LICENSE("GPL"); | |
| #define I2C_ADV7175 0xd4 | |
| #define I2C_ADV7176 0x54 | |
| static int debug; | |
| module_param(debug, int, 0); | |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); | |
| /* ----------------------------------------------------------------------- */ | |
| struct adv7175 { | |
| struct v4l2_subdev sd; | |
| v4l2_std_id norm; | |
| int input; | |
| }; | |
| static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd) | |
| { | |
| return container_of(sd, struct adv7175, sd); | |
| } | |
| static char *inputs[] = { "pass_through", "play_back", "color_bar" }; | |
| static u32 adv7175_codes[] = { | |
| MEDIA_BUS_FMT_UYVY8_2X8, | |
| MEDIA_BUS_FMT_UYVY8_1X16, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value) | |
| { | |
| struct i2c_client *client = v4l2_get_subdevdata(sd); | |
| return i2c_smbus_write_byte_data(client, reg, value); | |
| } | |
| static inline int adv7175_read(struct v4l2_subdev *sd, u8 reg) | |
| { | |
| struct i2c_client *client = v4l2_get_subdevdata(sd); | |
| return i2c_smbus_read_byte_data(client, reg); | |
| } | |
| static int adv7175_write_block(struct v4l2_subdev *sd, | |
| const u8 *data, unsigned int len) | |
| { | |
| struct i2c_client *client = v4l2_get_subdevdata(sd); | |
| int ret = -1; | |
| u8 reg; | |
| /* the adv7175 has an autoincrement function, use it if | |
| * the adapter understands raw I2C */ | |
| if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | |
| /* do raw I2C, not smbus compatible */ | |
| u8 block_data[32]; | |
| int block_len; | |
| while (len >= 2) { | |
| block_len = 0; | |
| block_data[block_len++] = reg = data[0]; | |
| do { | |
| block_data[block_len++] = data[1]; | |
| reg++; | |
| len -= 2; | |
| data += 2; | |
| } while (len >= 2 && data[0] == reg && block_len < 32); | |
| ret = i2c_master_send(client, block_data, block_len); | |
| if (ret < 0) | |
| break; | |
| } | |
| } else { | |
| /* do some slow I2C emulation kind of thing */ | |
| while (len >= 2) { | |
| reg = *data++; | |
| ret = adv7175_write(sd, reg, *data++); | |
| if (ret < 0) | |
| break; | |
| len -= 2; | |
| } | |
| } | |
| return ret; | |
| } | |
| static void set_subcarrier_freq(struct v4l2_subdev *sd, int pass_through) | |
| { | |
| /* for some reason pass_through NTSC needs | |
| * a different sub-carrier freq to remain stable. */ | |
| if (pass_through) | |
| adv7175_write(sd, 0x02, 0x00); | |
| else | |
| adv7175_write(sd, 0x02, 0x55); | |
| adv7175_write(sd, 0x03, 0x55); | |
| adv7175_write(sd, 0x04, 0x55); | |
| adv7175_write(sd, 0x05, 0x25); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* Output filter: S-Video Composite */ | |
| #define MR050 0x11 /* 0x09 */ | |
| #define MR060 0x14 /* 0x0c */ | |
| /* ----------------------------------------------------------------------- */ | |
| #define TR0MODE 0x46 | |
| #define TR0RST 0x80 | |
| #define TR1CAPT 0x80 | |
| #define TR1PLAY 0x00 | |
| static const unsigned char init_common[] = { | |
| 0x00, MR050, /* MR0, PAL enabled */ | |
| 0x01, 0x00, /* MR1 */ | |
| 0x02, 0x0c, /* subc. freq. */ | |
| 0x03, 0x8c, /* subc. freq. */ | |
| 0x04, 0x79, /* subc. freq. */ | |
| 0x05, 0x26, /* subc. freq. */ | |
| 0x06, 0x40, /* subc. phase */ | |
| 0x07, TR0MODE, /* TR0, 16bit */ | |
| 0x08, 0x21, /* */ | |
| 0x09, 0x00, /* */ | |
| 0x0a, 0x00, /* */ | |
| 0x0b, 0x00, /* */ | |
| 0x0c, TR1CAPT, /* TR1 */ | |
| 0x0d, 0x4f, /* MR2 */ | |
| 0x0e, 0x00, /* */ | |
| 0x0f, 0x00, /* */ | |
| 0x10, 0x00, /* */ | |
| 0x11, 0x00, /* */ | |
| }; | |
| static const unsigned char init_pal[] = { | |
| 0x00, MR050, /* MR0, PAL enabled */ | |
| 0x01, 0x00, /* MR1 */ | |
| 0x02, 0x0c, /* subc. freq. */ | |
| 0x03, 0x8c, /* subc. freq. */ | |
| 0x04, 0x79, /* subc. freq. */ | |
| 0x05, 0x26, /* subc. freq. */ | |
| 0x06, 0x40, /* subc. phase */ | |
| }; | |
| static const unsigned char init_ntsc[] = { | |
| 0x00, MR060, /* MR0, NTSC enabled */ | |
| 0x01, 0x00, /* MR1 */ | |
| 0x02, 0x55, /* subc. freq. */ | |
| 0x03, 0x55, /* subc. freq. */ | |
| 0x04, 0x55, /* subc. freq. */ | |
| 0x05, 0x25, /* subc. freq. */ | |
| 0x06, 0x1a, /* subc. phase */ | |
| }; | |
| static int adv7175_init(struct v4l2_subdev *sd, u32 val) | |
| { | |
| /* This is just for testing!!! */ | |
| adv7175_write_block(sd, init_common, sizeof(init_common)); | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| return 0; | |
| } | |
| static int adv7175_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) | |
| { | |
| struct adv7175 *encoder = to_adv7175(sd); | |
| if (std & V4L2_STD_NTSC) { | |
| adv7175_write_block(sd, init_ntsc, sizeof(init_ntsc)); | |
| if (encoder->input == 0) | |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| } else if (std & V4L2_STD_PAL) { | |
| adv7175_write_block(sd, init_pal, sizeof(init_pal)); | |
| if (encoder->input == 0) | |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| } else if (std & V4L2_STD_SECAM) { | |
| /* This is an attempt to convert | |
| * SECAM->PAL (typically it does not work | |
| * due to genlock: when decoder is in SECAM | |
| * and encoder in in PAL the subcarrier can | |
| * not be synchronized with horizontal | |
| * quency) */ | |
| adv7175_write_block(sd, init_pal, sizeof(init_pal)); | |
| if (encoder->input == 0) | |
| adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| } else { | |
| v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", | |
| (unsigned long long)std); | |
| return -EINVAL; | |
| } | |
| v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); | |
| encoder->norm = std; | |
| return 0; | |
| } | |
| static int adv7175_s_routing(struct v4l2_subdev *sd, | |
| u32 input, u32 output, u32 config) | |
| { | |
| struct adv7175 *encoder = to_adv7175(sd); | |
| /* RJ: input = 0: input is from decoder | |
| input = 1: input is from ZR36060 | |
| input = 2: color bar */ | |
| switch (input) { | |
| case 0: | |
| adv7175_write(sd, 0x01, 0x00); | |
| if (encoder->norm & V4L2_STD_NTSC) | |
| set_subcarrier_freq(sd, 1); | |
| adv7175_write(sd, 0x0c, TR1CAPT); /* TR1 */ | |
| if (encoder->norm & V4L2_STD_SECAM) | |
| adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ | |
| else | |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| /*udelay(10);*/ | |
| break; | |
| case 1: | |
| adv7175_write(sd, 0x01, 0x00); | |
| if (encoder->norm & V4L2_STD_NTSC) | |
| set_subcarrier_freq(sd, 0); | |
| adv7175_write(sd, 0x0c, TR1PLAY); /* TR1 */ | |
| adv7175_write(sd, 0x0d, 0x49); | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| /* udelay(10); */ | |
| break; | |
| case 2: | |
| adv7175_write(sd, 0x01, 0x80); | |
| if (encoder->norm & V4L2_STD_NTSC) | |
| set_subcarrier_freq(sd, 0); | |
| adv7175_write(sd, 0x0d, 0x49); | |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| adv7175_write(sd, 0x07, TR0MODE); | |
| /* udelay(10); */ | |
| break; | |
| default: | |
| v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); | |
| return -EINVAL; | |
| } | |
| v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); | |
| encoder->input = input; | |
| return 0; | |
| } | |
| static int adv7175_enum_mbus_code(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_mbus_code_enum *code) | |
| { | |
| if (code->pad || code->index >= ARRAY_SIZE(adv7175_codes)) | |
| return -EINVAL; | |
| code->code = adv7175_codes[code->index]; | |
| return 0; | |
| } | |
| static int adv7175_get_fmt(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *format) | |
| { | |
| struct v4l2_mbus_framefmt *mf = &format->format; | |
| u8 val = adv7175_read(sd, 0x7); | |
| if (format->pad) | |
| return -EINVAL; | |
| if ((val & 0x40) == (1 << 6)) | |
| mf->code = MEDIA_BUS_FMT_UYVY8_1X16; | |
| else | |
| mf->code = MEDIA_BUS_FMT_UYVY8_2X8; | |
| mf->colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| mf->width = 0; | |
| mf->height = 0; | |
| mf->field = V4L2_FIELD_ANY; | |
| return 0; | |
| } | |
| static int adv7175_set_fmt(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *format) | |
| { | |
| struct v4l2_mbus_framefmt *mf = &format->format; | |
| u8 val = adv7175_read(sd, 0x7); | |
| int ret = 0; | |
| if (format->pad) | |
| return -EINVAL; | |
| switch (mf->code) { | |
| case MEDIA_BUS_FMT_UYVY8_2X8: | |
| val &= ~0x40; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY8_1X16: | |
| val |= 0x40; | |
| break; | |
| default: | |
| v4l2_dbg(1, debug, sd, | |
| "illegal v4l2_mbus_framefmt code: %d\n", mf->code); | |
| return -EINVAL; | |
| } | |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) | |
| ret = adv7175_write(sd, 0x7, val); | |
| return ret; | |
| } | |
| static int adv7175_s_power(struct v4l2_subdev *sd, int on) | |
| { | |
| if (on) | |
| adv7175_write(sd, 0x01, 0x00); | |
| else | |
| adv7175_write(sd, 0x01, 0x78); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static const struct v4l2_subdev_core_ops adv7175_core_ops = { | |
| .init = adv7175_init, | |
| .s_power = adv7175_s_power, | |
| }; | |
| static const struct v4l2_subdev_video_ops adv7175_video_ops = { | |
| .s_std_output = adv7175_s_std_output, | |
| .s_routing = adv7175_s_routing, | |
| }; | |
| static const struct v4l2_subdev_pad_ops adv7175_pad_ops = { | |
| .enum_mbus_code = adv7175_enum_mbus_code, | |
| .get_fmt = adv7175_get_fmt, | |
| .set_fmt = adv7175_set_fmt, | |
| }; | |
| static const struct v4l2_subdev_ops adv7175_ops = { | |
| .core = &adv7175_core_ops, | |
| .video = &adv7175_video_ops, | |
| .pad = &adv7175_pad_ops, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| static int adv7175_probe(struct i2c_client *client) | |
| { | |
| int i; | |
| struct adv7175 *encoder; | |
| struct v4l2_subdev *sd; | |
| /* Check if the adapter supports the needed features */ | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| v4l_info(client, "chip found @ 0x%x (%s)\n", | |
| client->addr << 1, client->adapter->name); | |
| encoder = devm_kzalloc(&client->dev, sizeof(*encoder), GFP_KERNEL); | |
| if (encoder == NULL) | |
| return -ENOMEM; | |
| sd = &encoder->sd; | |
| v4l2_i2c_subdev_init(sd, client, &adv7175_ops); | |
| encoder->norm = V4L2_STD_NTSC; | |
| encoder->input = 0; | |
| i = adv7175_write_block(sd, init_common, sizeof(init_common)); | |
| if (i >= 0) { | |
| i = adv7175_write(sd, 0x07, TR0MODE | TR0RST); | |
| i = adv7175_write(sd, 0x07, TR0MODE); | |
| i = adv7175_read(sd, 0x12); | |
| v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); | |
| } | |
| if (i < 0) | |
| v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); | |
| return 0; | |
| } | |
| static void adv7175_remove(struct i2c_client *client) | |
| { | |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); | |
| v4l2_device_unregister_subdev(sd); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static const struct i2c_device_id adv7175_id[] = { | |
| { .name = "adv7175" }, | |
| { .name = "adv7176" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, adv7175_id); | |
| static struct i2c_driver adv7175_driver = { | |
| .driver = { | |
| .name = "adv7175", | |
| }, | |
| .probe = adv7175_probe, | |
| .remove = adv7175_remove, | |
| .id_table = adv7175_id, | |
| }; | |
| module_i2c_driver(adv7175_driver); |