| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner | |
| * | |
| * Copyright (C) 2010 Malcolm Priestley | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/dvb/frontend.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include "ix2505v.h" | |
| static int ix2505v_debug; | |
| #define dprintk(level, args...) do { \ | |
| if (ix2505v_debug & level) \ | |
| printk(KERN_DEBUG "ix2505v: " args); \ | |
| } while (0) | |
| #define deb_info(args...) dprintk(0x01, args) | |
| #define deb_i2c(args...) dprintk(0x02, args) | |
| struct ix2505v_state { | |
| struct i2c_adapter *i2c; | |
| const struct ix2505v_config *config; | |
| u32 frequency; | |
| }; | |
| /* | |
| * Data read format of the Sharp IX2505V B0017 | |
| * | |
| * byte1: 1 | 1 | 0 | 0 | 0 | MA1 | MA0 | 1 | |
| * byte2: POR | FL | RD2 | RD1 | RD0 | X | X | X | |
| * | |
| * byte1 = address | |
| * byte2; | |
| * POR = Power on Reset (VCC H=<2.2v L=>2.2v) | |
| * FL = Phase Lock (H=lock L=unlock) | |
| * RD0-2 = Reserved internal operations | |
| * | |
| * Only POR can be used to check the tuner is present | |
| * | |
| * Caution: after byte2 the I2C reverts to write mode continuing to read | |
| * may corrupt tuning data. | |
| * | |
| */ | |
| static int ix2505v_read_status_reg(struct ix2505v_state *state) | |
| { | |
| u8 addr = state->config->tuner_address; | |
| u8 b2[] = {0}; | |
| int ret; | |
| struct i2c_msg msg[1] = { | |
| { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } | |
| }; | |
| ret = i2c_transfer(state->i2c, msg, 1); | |
| deb_i2c("Read %s ", __func__); | |
| return (ret == 1) ? (int) b2[0] : -1; | |
| } | |
| static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count) | |
| { | |
| struct i2c_msg msg[1] = { | |
| { .addr = state->config->tuner_address, .flags = 0, | |
| .buf = buf, .len = count }, | |
| }; | |
| int ret; | |
| ret = i2c_transfer(state->i2c, msg, 1); | |
| if (ret != 1) { | |
| deb_i2c("%s: i2c error, ret=%d\n", __func__, ret); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static void ix2505v_release(struct dvb_frontend *fe) | |
| { | |
| struct ix2505v_state *state = fe->tuner_priv; | |
| fe->tuner_priv = NULL; | |
| kfree(state); | |
| } | |
| /* | |
| * Data write format of the Sharp IX2505V B0017 | |
| * | |
| * byte1: 1 | 1 | 0 | 0 | 0 | 0(MA1)| 0(MA0)| 0 | |
| * byte2: 0 | BG1 | BG2 | N8 | N7 | N6 | N5 | N4 | |
| * byte3: N3 | N2 | N1 | A5 | A4 | A3 | A2 | A1 | |
| * byte4: 1 | 1(C1) | 1(C0) | PD5 | PD4 | TM | 0(RTS)| 1(REF) | |
| * byte5: BA2 | BA1 | BA0 | PSC | PD3 |PD2/TS2|DIV/TS1|PD0/TS0 | |
| * | |
| * byte1 = address | |
| * | |
| * Write order | |
| * 1) byte1 -> byte2 -> byte3 -> byte4 -> byte5 | |
| * 2) byte1 -> byte4 -> byte5 -> byte2 -> byte3 | |
| * 3) byte1 -> byte2 -> byte3 -> byte4 | |
| * 4) byte1 -> byte4 -> byte5 -> byte2 | |
| * 5) byte1 -> byte2 -> byte3 | |
| * 6) byte1 -> byte4 -> byte5 | |
| * 7) byte1 -> byte2 | |
| * 8) byte1 -> byte4 | |
| * | |
| * Recommended Setup | |
| * 1 -> 8 -> 6 | |
| */ | |
| static int ix2505v_set_params(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| struct ix2505v_state *state = fe->tuner_priv; | |
| u32 frequency = c->frequency; | |
| u32 b_w = (c->symbol_rate * 27) / 32000; | |
| u32 div_factor, N , A, x; | |
| int ret = 0, len; | |
| u8 gain, cc, ref, psc, local_osc, lpf; | |
| u8 data[4] = {0}; | |
| if ((frequency < fe->ops.info.frequency_min_hz / kHz) | |
| || (frequency > fe->ops.info.frequency_max_hz / kHz)) | |
| return -EINVAL; | |
| if (state->config->tuner_gain) | |
| gain = (state->config->tuner_gain < 4) | |
| ? state->config->tuner_gain : 0; | |
| else | |
| gain = 0x0; | |
| if (state->config->tuner_chargepump) | |
| cc = state->config->tuner_chargepump; | |
| else | |
| cc = 0x3; | |
| ref = 8; /* REF =1 */ | |
| psc = 32; /* PSC = 0 */ | |
| div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */ | |
| x = div_factor / psc; | |
| N = x/100; | |
| A = ((x - (N * 100)) * psc) / 100; | |
| data[0] = ((gain & 0x3) << 5) | (N >> 3); | |
| data[1] = (N << 5) | (A & 0x1f); | |
| data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/ | |
| deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A); | |
| if (frequency <= 1065000) | |
| local_osc = (6 << 5) | 2; | |
| else if (frequency <= 1170000) | |
| local_osc = (7 << 5) | 2; | |
| else if (frequency <= 1300000) | |
| local_osc = (1 << 5); | |
| else if (frequency <= 1445000) | |
| local_osc = (2 << 5); | |
| else if (frequency <= 1607000) | |
| local_osc = (3 << 5); | |
| else if (frequency <= 1778000) | |
| local_osc = (4 << 5); | |
| else if (frequency <= 1942000) | |
| local_osc = (5 << 5); | |
| else /*frequency up to 2150000*/ | |
| local_osc = (6 << 5); | |
| data[3] = local_osc; /* all other bits set 0 */ | |
| if (b_w <= 10000) | |
| lpf = 0xc; | |
| else if (b_w <= 12000) | |
| lpf = 0x2; | |
| else if (b_w <= 14000) | |
| lpf = 0xa; | |
| else if (b_w <= 16000) | |
| lpf = 0x6; | |
| else if (b_w <= 18000) | |
| lpf = 0xe; | |
| else if (b_w <= 20000) | |
| lpf = 0x1; | |
| else if (b_w <= 22000) | |
| lpf = 0x9; | |
| else if (b_w <= 24000) | |
| lpf = 0x5; | |
| else if (b_w <= 26000) | |
| lpf = 0xd; | |
| else if (b_w <= 28000) | |
| lpf = 0x3; | |
| else | |
| lpf = 0xb; | |
| deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf); | |
| deb_info("Data 0=[%4phN]\n", data); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| len = sizeof(data); | |
| ret |= ix2505v_write(state, data, len); | |
| data[2] |= 0x4; /* set TM = 1 other bits same */ | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| len = 1; | |
| ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */ | |
| msleep(10); | |
| data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */ | |
| data[3] |= (lpf & 0x3) << 2; | |
| deb_info("Data 2=[%x%x]\n", data[2], data[3]); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| len = 2; | |
| ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */ | |
| if (state->config->min_delay_ms) | |
| msleep(state->config->min_delay_ms); | |
| state->frequency = frequency; | |
| return ret; | |
| } | |
| static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency) | |
| { | |
| struct ix2505v_state *state = fe->tuner_priv; | |
| *frequency = state->frequency; | |
| return 0; | |
| } | |
| static const struct dvb_tuner_ops ix2505v_tuner_ops = { | |
| .info = { | |
| .name = "Sharp IX2505V (B0017)", | |
| .frequency_min_hz = 950 * MHz, | |
| .frequency_max_hz = 2175 * MHz | |
| }, | |
| .release = ix2505v_release, | |
| .set_params = ix2505v_set_params, | |
| .get_frequency = ix2505v_get_frequency, | |
| }; | |
| struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, | |
| const struct ix2505v_config *config, | |
| struct i2c_adapter *i2c) | |
| { | |
| struct ix2505v_state *state = NULL; | |
| int ret; | |
| if (NULL == config) { | |
| deb_i2c("%s: no config ", __func__); | |
| goto error; | |
| } | |
| state = kzalloc_obj(struct ix2505v_state); | |
| if (NULL == state) | |
| return NULL; | |
| state->config = config; | |
| state->i2c = i2c; | |
| if (state->config->tuner_write_only) { | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| ret = ix2505v_read_status_reg(state); | |
| if (ret & 0x80) { | |
| deb_i2c("%s: No IX2505V found\n", __func__); | |
| goto error; | |
| } | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); | |
| } | |
| fe->tuner_priv = state; | |
| memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops, | |
| sizeof(struct dvb_tuner_ops)); | |
| deb_i2c("%s: initialization (%s addr=0x%02x) ok\n", | |
| __func__, fe->ops.tuner_ops.info.name, config->tuner_address); | |
| return fe; | |
| error: | |
| kfree(state); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(ix2505v_attach); | |
| module_param_named(debug, ix2505v_debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); | |
| MODULE_DESCRIPTION("DVB IX2505V tuner driver"); | |
| MODULE_AUTHOR("Malcolm Priestley"); | |
| MODULE_LICENSE("GPL"); |