| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * cxd2099.c: Driver for the Sony CXD2099AR Common Interface Controller | |
| * | |
| * Copyright (C) 2010-2013 Digital Devices GmbH | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/i2c.h> | |
| #include <linux/regmap.h> | |
| #include <linux/wait.h> | |
| #include <linux/delay.h> | |
| #include <linux/mutex.h> | |
| #include <linux/io.h> | |
| #include "cxd2099.h" | |
| static int buffermode; | |
| module_param(buffermode, int, 0444); | |
| MODULE_PARM_DESC(buffermode, "Enable CXD2099AR buffer mode (default: disabled)"); | |
| static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount); | |
| struct cxd { | |
| struct dvb_ca_en50221 en; | |
| struct cxd2099_cfg cfg; | |
| struct i2c_client *client; | |
| struct regmap *regmap; | |
| u8 regs[0x23]; | |
| u8 lastaddress; | |
| u8 clk_reg_f; | |
| u8 clk_reg_b; | |
| int mode; | |
| int ready; | |
| int dr; | |
| int write_busy; | |
| int slot_stat; | |
| u8 amem[1024]; | |
| int amem_read; | |
| int cammode; | |
| struct mutex lock; /* device access lock */ | |
| u8 rbuf[1028]; | |
| u8 wbuf[1028]; | |
| }; | |
| static int read_block(struct cxd *ci, u8 adr, u8 *data, u16 n) | |
| { | |
| int status = 0; | |
| if (ci->lastaddress != adr) | |
| status = regmap_write(ci->regmap, 0, adr); | |
| if (!status) { | |
| ci->lastaddress = adr; | |
| while (n) { | |
| int len = n; | |
| if (ci->cfg.max_i2c && len > ci->cfg.max_i2c) | |
| len = ci->cfg.max_i2c; | |
| status = regmap_raw_read(ci->regmap, 1, data, len); | |
| if (status) | |
| return status; | |
| data += len; | |
| n -= len; | |
| } | |
| } | |
| return status; | |
| } | |
| static int read_reg(struct cxd *ci, u8 reg, u8 *val) | |
| { | |
| return read_block(ci, reg, val, 1); | |
| } | |
| static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n) | |
| { | |
| int status; | |
| u8 addr[2] = {address & 0xff, address >> 8}; | |
| status = regmap_raw_write(ci->regmap, 2, addr, 2); | |
| if (!status) | |
| status = regmap_raw_read(ci->regmap, 3, data, n); | |
| return status; | |
| } | |
| static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n) | |
| { | |
| int status; | |
| u8 addr[2] = {address & 0xff, address >> 8}; | |
| status = regmap_raw_write(ci->regmap, 2, addr, 2); | |
| if (!status) { | |
| u8 buf[256]; | |
| memcpy(buf, data, n); | |
| status = regmap_raw_write(ci->regmap, 3, buf, n); | |
| } | |
| return status; | |
| } | |
| static int read_io(struct cxd *ci, u16 address, unsigned int *val) | |
| { | |
| int status; | |
| u8 addr[2] = {address & 0xff, address >> 8}; | |
| status = regmap_raw_write(ci->regmap, 2, addr, 2); | |
| if (!status) | |
| status = regmap_read(ci->regmap, 3, val); | |
| return status; | |
| } | |
| static int write_io(struct cxd *ci, u16 address, u8 val) | |
| { | |
| int status; | |
| u8 addr[2] = {address & 0xff, address >> 8}; | |
| status = regmap_raw_write(ci->regmap, 2, addr, 2); | |
| if (!status) | |
| status = regmap_write(ci->regmap, 3, val); | |
| return status; | |
| } | |
| static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask) | |
| { | |
| int status = 0; | |
| unsigned int regval; | |
| if (ci->lastaddress != reg) | |
| status = regmap_write(ci->regmap, 0, reg); | |
| if (!status && reg >= 6 && reg <= 8 && mask != 0xff) { | |
| status = regmap_read(ci->regmap, 1, ®val); | |
| ci->regs[reg] = regval; | |
| } | |
| ci->lastaddress = reg; | |
| ci->regs[reg] = (ci->regs[reg] & (~mask)) | val; | |
| if (!status) | |
| status = regmap_write(ci->regmap, 1, ci->regs[reg]); | |
| if (reg == 0x20) | |
| ci->regs[reg] &= 0x7f; | |
| return status; | |
| } | |
| static int write_reg(struct cxd *ci, u8 reg, u8 val) | |
| { | |
| return write_regm(ci, reg, val, 0xff); | |
| } | |
| static int write_block(struct cxd *ci, u8 adr, u8 *data, u16 n) | |
| { | |
| int status = 0; | |
| u8 *buf = ci->wbuf; | |
| if (ci->lastaddress != adr) | |
| status = regmap_write(ci->regmap, 0, adr); | |
| if (status) | |
| return status; | |
| ci->lastaddress = adr; | |
| while (n) { | |
| int len = n; | |
| if (ci->cfg.max_i2c && (len + 1 > ci->cfg.max_i2c)) | |
| len = ci->cfg.max_i2c - 1; | |
| memcpy(buf, data, len); | |
| status = regmap_raw_write(ci->regmap, 1, buf, len); | |
| if (status) | |
| return status; | |
| n -= len; | |
| data += len; | |
| } | |
| return status; | |
| } | |
| static void set_mode(struct cxd *ci, int mode) | |
| { | |
| if (mode == ci->mode) | |
| return; | |
| switch (mode) { | |
| case 0x00: /* IO mem */ | |
| write_regm(ci, 0x06, 0x00, 0x07); | |
| break; | |
| case 0x01: /* ATT mem */ | |
| write_regm(ci, 0x06, 0x02, 0x07); | |
| break; | |
| default: | |
| break; | |
| } | |
| ci->mode = mode; | |
| } | |
| static void cam_mode(struct cxd *ci, int mode) | |
| { | |
| u8 dummy; | |
| if (mode == ci->cammode) | |
| return; | |
| switch (mode) { | |
| case 0x00: | |
| write_regm(ci, 0x20, 0x80, 0x80); | |
| break; | |
| case 0x01: | |
| if (!ci->en.read_data) | |
| return; | |
| ci->write_busy = 0; | |
| dev_info(&ci->client->dev, "enable cam buffer mode\n"); | |
| write_reg(ci, 0x0d, 0x00); | |
| write_reg(ci, 0x0e, 0x01); | |
| write_regm(ci, 0x08, 0x40, 0x40); | |
| read_reg(ci, 0x12, &dummy); | |
| write_regm(ci, 0x08, 0x80, 0x80); | |
| break; | |
| default: | |
| break; | |
| } | |
| ci->cammode = mode; | |
| } | |
| static int init(struct cxd *ci) | |
| { | |
| int status; | |
| mutex_lock(&ci->lock); | |
| ci->mode = -1; | |
| do { | |
| status = write_reg(ci, 0x00, 0x00); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x01, 0x00); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x02, 0x10); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x03, 0x00); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x05, 0xFF); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x06, 0x1F); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x07, 0x1F); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x08, 0x28); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x14, 0x20); | |
| if (status < 0) | |
| break; | |
| /* TOSTRT = 8, Mode B (gated clock), falling Edge, | |
| * Serial, POL=HIGH, MSB | |
| */ | |
| status = write_reg(ci, 0x0A, 0xA7); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x0B, 0x33); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x0C, 0x33); | |
| if (status < 0) | |
| break; | |
| status = write_regm(ci, 0x14, 0x00, 0x0F); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x15, ci->clk_reg_b); | |
| if (status < 0) | |
| break; | |
| status = write_regm(ci, 0x16, 0x00, 0x0F); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x17, ci->clk_reg_f); | |
| if (status < 0) | |
| break; | |
| if (ci->cfg.clock_mode == 2) { | |
| /* bitrate*2^13/ 72000 */ | |
| u32 reg = ((ci->cfg.bitrate << 13) + 71999) / 72000; | |
| if (ci->cfg.polarity) { | |
| status = write_reg(ci, 0x09, 0x6f); | |
| if (status < 0) | |
| break; | |
| } else { | |
| status = write_reg(ci, 0x09, 0x6d); | |
| if (status < 0) | |
| break; | |
| } | |
| status = write_reg(ci, 0x20, 0x08); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x21, (reg >> 8) & 0xff); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x22, reg & 0xff); | |
| if (status < 0) | |
| break; | |
| } else if (ci->cfg.clock_mode == 1) { | |
| if (ci->cfg.polarity) { | |
| status = write_reg(ci, 0x09, 0x6f); /* D */ | |
| if (status < 0) | |
| break; | |
| } else { | |
| status = write_reg(ci, 0x09, 0x6d); | |
| if (status < 0) | |
| break; | |
| } | |
| status = write_reg(ci, 0x20, 0x68); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x21, 0x00); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x22, 0x02); | |
| if (status < 0) | |
| break; | |
| } else { | |
| if (ci->cfg.polarity) { | |
| status = write_reg(ci, 0x09, 0x4f); /* C */ | |
| if (status < 0) | |
| break; | |
| } else { | |
| status = write_reg(ci, 0x09, 0x4d); | |
| if (status < 0) | |
| break; | |
| } | |
| status = write_reg(ci, 0x20, 0x28); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x21, 0x00); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x22, 0x07); | |
| if (status < 0) | |
| break; | |
| } | |
| status = write_regm(ci, 0x20, 0x80, 0x80); | |
| if (status < 0) | |
| break; | |
| status = write_regm(ci, 0x03, 0x02, 0x02); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x01, 0x04); | |
| if (status < 0) | |
| break; | |
| status = write_reg(ci, 0x00, 0x31); | |
| if (status < 0) | |
| break; | |
| /* Put TS in bypass */ | |
| status = write_regm(ci, 0x09, 0x08, 0x08); | |
| if (status < 0) | |
| break; | |
| ci->cammode = -1; | |
| cam_mode(ci, 0); | |
| } while (0); | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int read_attribute_mem(struct dvb_ca_en50221 *ca, | |
| int slot, int address) | |
| { | |
| struct cxd *ci = ca->data; | |
| u8 val; | |
| mutex_lock(&ci->lock); | |
| set_mode(ci, 1); | |
| read_pccard(ci, address, &val, 1); | |
| mutex_unlock(&ci->lock); | |
| return val; | |
| } | |
| static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, | |
| int address, u8 value) | |
| { | |
| struct cxd *ci = ca->data; | |
| mutex_lock(&ci->lock); | |
| set_mode(ci, 1); | |
| write_pccard(ci, address, &value, 1); | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int read_cam_control(struct dvb_ca_en50221 *ca, | |
| int slot, u8 address) | |
| { | |
| struct cxd *ci = ca->data; | |
| unsigned int val; | |
| mutex_lock(&ci->lock); | |
| set_mode(ci, 0); | |
| read_io(ci, address, &val); | |
| mutex_unlock(&ci->lock); | |
| return val; | |
| } | |
| static int write_cam_control(struct dvb_ca_en50221 *ca, int slot, | |
| u8 address, u8 value) | |
| { | |
| struct cxd *ci = ca->data; | |
| mutex_lock(&ci->lock); | |
| set_mode(ci, 0); | |
| write_io(ci, address, value); | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int slot_reset(struct dvb_ca_en50221 *ca, int slot) | |
| { | |
| struct cxd *ci = ca->data; | |
| if (ci->cammode) | |
| read_data(ca, slot, ci->rbuf, 0); | |
| mutex_lock(&ci->lock); | |
| cam_mode(ci, 0); | |
| write_reg(ci, 0x00, 0x21); | |
| write_reg(ci, 0x06, 0x1F); | |
| write_reg(ci, 0x00, 0x31); | |
| write_regm(ci, 0x20, 0x80, 0x80); | |
| write_reg(ci, 0x03, 0x02); | |
| ci->ready = 0; | |
| ci->mode = -1; | |
| { | |
| int i; | |
| for (i = 0; i < 100; i++) { | |
| usleep_range(10000, 11000); | |
| if (ci->ready) | |
| break; | |
| } | |
| } | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot) | |
| { | |
| struct cxd *ci = ca->data; | |
| dev_dbg(&ci->client->dev, "%s\n", __func__); | |
| if (ci->cammode) | |
| read_data(ca, slot, ci->rbuf, 0); | |
| mutex_lock(&ci->lock); | |
| write_reg(ci, 0x00, 0x21); | |
| write_reg(ci, 0x06, 0x1F); | |
| msleep(300); | |
| write_regm(ci, 0x09, 0x08, 0x08); | |
| write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */ | |
| write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */ | |
| ci->mode = -1; | |
| ci->write_busy = 0; | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) | |
| { | |
| struct cxd *ci = ca->data; | |
| mutex_lock(&ci->lock); | |
| write_regm(ci, 0x09, 0x00, 0x08); | |
| set_mode(ci, 0); | |
| cam_mode(ci, 1); | |
| mutex_unlock(&ci->lock); | |
| return 0; | |
| } | |
| static int campoll(struct cxd *ci) | |
| { | |
| u8 istat; | |
| read_reg(ci, 0x04, &istat); | |
| if (!istat) | |
| return 0; | |
| write_reg(ci, 0x05, istat); | |
| if (istat & 0x40) | |
| ci->dr = 1; | |
| if (istat & 0x20) | |
| ci->write_busy = 0; | |
| if (istat & 2) { | |
| u8 slotstat; | |
| read_reg(ci, 0x01, &slotstat); | |
| if (!(2 & slotstat)) { | |
| if (!ci->slot_stat) { | |
| ci->slot_stat |= | |
| DVB_CA_EN50221_POLL_CAM_PRESENT; | |
| write_regm(ci, 0x03, 0x08, 0x08); | |
| } | |
| } else { | |
| if (ci->slot_stat) { | |
| ci->slot_stat = 0; | |
| write_regm(ci, 0x03, 0x00, 0x08); | |
| dev_info(&ci->client->dev, "NO CAM\n"); | |
| ci->ready = 0; | |
| } | |
| } | |
| if ((istat & 8) && | |
| ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) { | |
| ci->ready = 1; | |
| ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) | |
| { | |
| struct cxd *ci = ca->data; | |
| u8 slotstat; | |
| mutex_lock(&ci->lock); | |
| campoll(ci); | |
| read_reg(ci, 0x01, &slotstat); | |
| mutex_unlock(&ci->lock); | |
| return ci->slot_stat; | |
| } | |
| static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount) | |
| { | |
| struct cxd *ci = ca->data; | |
| u8 msb, lsb; | |
| u16 len; | |
| mutex_lock(&ci->lock); | |
| campoll(ci); | |
| mutex_unlock(&ci->lock); | |
| if (!ci->dr) | |
| return 0; | |
| mutex_lock(&ci->lock); | |
| read_reg(ci, 0x0f, &msb); | |
| read_reg(ci, 0x10, &lsb); | |
| len = ((u16)msb << 8) | lsb; | |
| if (len > ecount || len < 2) { | |
| /* read it anyway or cxd may hang */ | |
| read_block(ci, 0x12, ci->rbuf, len); | |
| mutex_unlock(&ci->lock); | |
| return -EIO; | |
| } | |
| read_block(ci, 0x12, ebuf, len); | |
| ci->dr = 0; | |
| mutex_unlock(&ci->lock); | |
| return len; | |
| } | |
| static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount) | |
| { | |
| struct cxd *ci = ca->data; | |
| if (ci->write_busy) | |
| return -EAGAIN; | |
| mutex_lock(&ci->lock); | |
| write_reg(ci, 0x0d, ecount >> 8); | |
| write_reg(ci, 0x0e, ecount & 0xff); | |
| write_block(ci, 0x11, ebuf, ecount); | |
| ci->write_busy = 1; | |
| mutex_unlock(&ci->lock); | |
| return ecount; | |
| } | |
| static const struct dvb_ca_en50221 en_templ = { | |
| .read_attribute_mem = read_attribute_mem, | |
| .write_attribute_mem = write_attribute_mem, | |
| .read_cam_control = read_cam_control, | |
| .write_cam_control = write_cam_control, | |
| .slot_reset = slot_reset, | |
| .slot_shutdown = slot_shutdown, | |
| .slot_ts_enable = slot_ts_enable, | |
| .poll_slot_status = poll_slot_status, | |
| .read_data = read_data, | |
| .write_data = write_data, | |
| }; | |
| static int cxd2099_probe(struct i2c_client *client) | |
| { | |
| struct cxd *ci; | |
| struct cxd2099_cfg *cfg = client->dev.platform_data; | |
| static const struct regmap_config rm_cfg = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| unsigned int val; | |
| int ret; | |
| ci = kzalloc_obj(*ci); | |
| if (!ci) { | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| ci->client = client; | |
| memcpy(&ci->cfg, cfg, sizeof(ci->cfg)); | |
| ci->regmap = regmap_init_i2c(client, &rm_cfg); | |
| if (IS_ERR(ci->regmap)) { | |
| ret = PTR_ERR(ci->regmap); | |
| goto err_kfree; | |
| } | |
| ret = regmap_read(ci->regmap, 0x00, &val); | |
| if (ret < 0) { | |
| dev_info(&client->dev, "No CXD2099AR detected at 0x%02x\n", | |
| client->addr); | |
| goto err_rmexit; | |
| } | |
| mutex_init(&ci->lock); | |
| ci->lastaddress = 0xff; | |
| ci->clk_reg_b = 0x4a; | |
| ci->clk_reg_f = 0x1b; | |
| ci->en = en_templ; | |
| ci->en.data = ci; | |
| init(ci); | |
| dev_info(&client->dev, "Attached CXD2099AR at 0x%02x\n", client->addr); | |
| *cfg->en = &ci->en; | |
| if (!buffermode) { | |
| ci->en.read_data = NULL; | |
| ci->en.write_data = NULL; | |
| } else { | |
| dev_info(&client->dev, "Using CXD2099AR buffer mode"); | |
| } | |
| i2c_set_clientdata(client, ci); | |
| return 0; | |
| err_rmexit: | |
| regmap_exit(ci->regmap); | |
| err_kfree: | |
| kfree(ci); | |
| err: | |
| return ret; | |
| } | |
| static void cxd2099_remove(struct i2c_client *client) | |
| { | |
| struct cxd *ci = i2c_get_clientdata(client); | |
| regmap_exit(ci->regmap); | |
| kfree(ci); | |
| } | |
| static const struct i2c_device_id cxd2099_id[] = { | |
| { .name = "cxd2099" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, cxd2099_id); | |
| static struct i2c_driver cxd2099_driver = { | |
| .driver = { | |
| .name = "cxd2099", | |
| }, | |
| .probe = cxd2099_probe, | |
| .remove = cxd2099_remove, | |
| .id_table = cxd2099_id, | |
| }; | |
| module_i2c_driver(cxd2099_driver); | |
| MODULE_DESCRIPTION("Sony CXD2099AR Common Interface controller driver"); | |
| MODULE_AUTHOR("Ralph Metzler"); | |
| MODULE_LICENSE("GPL v2"); |