| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * intel-pasid.c - PASID idr, table and entry manipulation | |
| * | |
| * Copyright (C) 2018 Intel Corporation | |
| * | |
| * Author: Lu Baolu <baolu.lu@linux.intel.com> | |
| */ | |
| #define pr_fmt(fmt) "DMAR: " fmt | |
| #include <linux/bitops.h> | |
| #include <linux/cpufeature.h> | |
| #include <linux/dmar.h> | |
| #include <linux/iommu.h> | |
| #include <linux/memory.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci-ats.h> | |
| #include <linux/spinlock.h> | |
| #include "iommu.h" | |
| #include "pasid.h" | |
| #include "../iommu-pages.h" | |
| /* | |
| * Intel IOMMU system wide PASID name space: | |
| */ | |
| u32 intel_pasid_max_id = PASID_MAX; | |
| /* | |
| * Per device pasid table management: | |
| */ | |
| /* | |
| * Allocate a pasid table for @dev. It should be called in a | |
| * single-thread context. | |
| */ | |
| int intel_pasid_alloc_table(struct device *dev) | |
| { | |
| struct device_domain_info *info; | |
| struct pasid_table *pasid_table; | |
| struct pasid_dir_entry *dir; | |
| u32 max_pasid = 0; | |
| int order, size; | |
| might_sleep(); | |
| info = dev_iommu_priv_get(dev); | |
| if (WARN_ON(!info || !dev_is_pci(dev))) | |
| return -ENODEV; | |
| if (WARN_ON(info->pasid_table)) | |
| return -EEXIST; | |
| pasid_table = kzalloc_obj(*pasid_table); | |
| if (!pasid_table) | |
| return -ENOMEM; | |
| if (info->pasid_supported) | |
| max_pasid = min_t(u32, pci_max_pasids(to_pci_dev(dev)), | |
| intel_pasid_max_id); | |
| size = max_pasid >> (PASID_PDE_SHIFT - 3); | |
| order = size ? get_order(size) : 0; | |
| dir = iommu_alloc_pages_node_sz(info->iommu->node, GFP_KERNEL, | |
| 1 << (order + PAGE_SHIFT)); | |
| if (!dir) { | |
| kfree(pasid_table); | |
| return -ENOMEM; | |
| } | |
| pasid_table->table = dir; | |
| pasid_table->max_pasid = 1 << (order + PAGE_SHIFT + 3); | |
| info->pasid_table = pasid_table; | |
| if (!ecap_coherent(info->iommu->ecap)) | |
| clflush_cache_range(pasid_table->table, (1 << order) * PAGE_SIZE); | |
| return 0; | |
| } | |
| void intel_pasid_free_table(struct device *dev) | |
| { | |
| struct device_domain_info *info; | |
| struct pasid_table *pasid_table; | |
| struct pasid_dir_entry *dir; | |
| struct pasid_entry *table; | |
| int i, max_pde; | |
| info = dev_iommu_priv_get(dev); | |
| if (!info || !dev_is_pci(dev) || !info->pasid_table) | |
| return; | |
| pasid_table = info->pasid_table; | |
| info->pasid_table = NULL; | |
| /* Free scalable mode PASID directory tables: */ | |
| dir = pasid_table->table; | |
| max_pde = pasid_table->max_pasid >> PASID_PDE_SHIFT; | |
| for (i = 0; i < max_pde; i++) { | |
| table = get_pasid_table_from_pde(&dir[i]); | |
| iommu_free_pages(table); | |
| } | |
| iommu_free_pages(pasid_table->table); | |
| kfree(pasid_table); | |
| } | |
| struct pasid_table *intel_pasid_get_table(struct device *dev) | |
| { | |
| struct device_domain_info *info; | |
| info = dev_iommu_priv_get(dev); | |
| if (!info) | |
| return NULL; | |
| return info->pasid_table; | |
| } | |
| static int intel_pasid_get_dev_max_id(struct device *dev) | |
| { | |
| struct device_domain_info *info; | |
| info = dev_iommu_priv_get(dev); | |
| if (!info || !info->pasid_table) | |
| return 0; | |
| return info->pasid_table->max_pasid; | |
| } | |
| static struct pasid_entry *intel_pasid_get_entry(struct device *dev, u32 pasid) | |
| { | |
| struct device_domain_info *info; | |
| struct pasid_table *pasid_table; | |
| struct pasid_dir_entry *dir; | |
| struct pasid_entry *entries; | |
| int dir_index, index; | |
| pasid_table = intel_pasid_get_table(dev); | |
| if (WARN_ON(!pasid_table || pasid >= intel_pasid_get_dev_max_id(dev))) | |
| return NULL; | |
| dir = pasid_table->table; | |
| info = dev_iommu_priv_get(dev); | |
| dir_index = pasid >> PASID_PDE_SHIFT; | |
| index = pasid & PASID_PTE_MASK; | |
| retry: | |
| entries = get_pasid_table_from_pde(&dir[dir_index]); | |
| if (!entries) { | |
| u64 tmp; | |
| entries = iommu_alloc_pages_node_sz(info->iommu->node, | |
| GFP_ATOMIC, SZ_4K); | |
| if (!entries) | |
| return NULL; | |
| if (!ecap_coherent(info->iommu->ecap)) | |
| clflush_cache_range(entries, VTD_PAGE_SIZE); | |
| /* | |
| * The pasid directory table entry won't be freed after | |
| * allocation. No worry about the race with free and | |
| * clear. However, this entry might be populated by others | |
| * while we are preparing it. Use theirs with a retry. | |
| */ | |
| tmp = 0ULL; | |
| if (!try_cmpxchg64(&dir[dir_index].val, &tmp, | |
| (u64)virt_to_phys(entries) | PASID_PTE_PRESENT)) { | |
| iommu_free_pages(entries); | |
| goto retry; | |
| } | |
| if (!ecap_coherent(info->iommu->ecap)) | |
| clflush_cache_range(&dir[dir_index].val, sizeof(*dir)); | |
| } | |
| return &entries[index]; | |
| } | |
| /* | |
| * Interfaces for PASID table entry manipulation: | |
| */ | |
| static void | |
| intel_pasid_clear_entry(struct device *dev, u32 pasid, bool fault_ignore) | |
| { | |
| struct pasid_entry *pe; | |
| pe = intel_pasid_get_entry(dev, pasid); | |
| if (WARN_ON(!pe)) | |
| return; | |
| if (fault_ignore && pasid_pte_is_present(pe)) | |
| pasid_clear_entry_with_fpd(pe); | |
| else | |
| pasid_clear_entry(pe); | |
| } | |
| static void | |
| pasid_cache_invalidation_with_pasid(struct intel_iommu *iommu, | |
| u16 did, u32 pasid) | |
| { | |
| struct qi_desc desc; | |
| desc.qw0 = QI_PC_DID(did) | QI_PC_GRAN(QI_PC_PASID_SEL) | | |
| QI_PC_PASID(pasid) | QI_PC_TYPE; | |
| desc.qw1 = 0; | |
| desc.qw2 = 0; | |
| desc.qw3 = 0; | |
| qi_submit_sync(iommu, &desc, 1, 0); | |
| } | |
| static void | |
| devtlb_invalidation_with_pasid(struct intel_iommu *iommu, | |
| struct device *dev, u32 pasid) | |
| { | |
| struct device_domain_info *info; | |
| u16 sid, qdep, pfsid; | |
| info = dev_iommu_priv_get(dev); | |
| if (!info || !info->ats_enabled) | |
| return; | |
| if (!pci_device_is_present(to_pci_dev(dev))) | |
| return; | |
| sid = PCI_DEVID(info->bus, info->devfn); | |
| qdep = info->ats_qdep; | |
| pfsid = info->pfsid; | |
| /* | |
| * When PASID 0 is used, it indicates RID2PASID(DMA request w/o PASID), | |
| * devTLB flush w/o PASID should be used. For non-zero PASID under | |
| * SVA usage, device could do DMA with multiple PASIDs. It is more | |
| * efficient to flush devTLB specific to the PASID. | |
| */ | |
| if (pasid == IOMMU_NO_PASID) | |
| qi_flush_dev_iotlb(iommu, sid, pfsid, qdep, 0, 64 - VTD_PAGE_SHIFT); | |
| else | |
| qi_flush_dev_iotlb_pasid(iommu, sid, pfsid, pasid, qdep, 0, 64 - VTD_PAGE_SHIFT); | |
| } | |
| void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev, | |
| u32 pasid, bool fault_ignore) | |
| { | |
| struct pasid_entry *pte; | |
| u16 did, pgtt; | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (WARN_ON(!pte)) { | |
| spin_unlock(&iommu->lock); | |
| return; | |
| } | |
| if (!pasid_pte_is_present(pte)) { | |
| if (!pasid_pte_is_fault_disabled(pte)) { | |
| WARN_ON(READ_ONCE(pte->val[0]) != 0); | |
| spin_unlock(&iommu->lock); | |
| return; | |
| } | |
| /* | |
| * When a PASID is used for SVA by a device, it's possible | |
| * that the pasid entry is non-present with the Fault | |
| * Processing Disabled bit set. Clear the pasid entry and | |
| * drain the PRQ for the PASID before return. | |
| */ | |
| pasid_clear_entry(pte); | |
| spin_unlock(&iommu->lock); | |
| intel_iommu_drain_pasid_prq(dev, pasid); | |
| return; | |
| } | |
| did = pasid_get_domain_id(pte); | |
| pgtt = pasid_pte_get_pgtt(pte); | |
| pasid_clear_present(pte); | |
| spin_unlock(&iommu->lock); | |
| if (!ecap_coherent(iommu->ecap)) | |
| clflush_cache_range(pte, sizeof(*pte)); | |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); | |
| if (pgtt == PASID_ENTRY_PGTT_PT || pgtt == PASID_ENTRY_PGTT_FL_ONLY) | |
| qi_flush_piotlb_all(iommu, did, pasid); | |
| else | |
| iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH); | |
| devtlb_invalidation_with_pasid(iommu, dev, pasid); | |
| intel_pasid_clear_entry(dev, pasid, fault_ignore); | |
| if (!ecap_coherent(iommu->ecap)) | |
| clflush_cache_range(pte, sizeof(*pte)); | |
| if (!fault_ignore) | |
| intel_iommu_drain_pasid_prq(dev, pasid); | |
| } | |
| /* | |
| * This function flushes cache for a newly setup pasid table entry. | |
| * Caller of it should not modify the in-use pasid table entries. | |
| */ | |
| static void pasid_flush_caches(struct intel_iommu *iommu, | |
| struct pasid_entry *pte, | |
| u32 pasid, u16 did) | |
| { | |
| if (!ecap_coherent(iommu->ecap)) | |
| clflush_cache_range(pte, sizeof(*pte)); | |
| if (cap_caching_mode(iommu->cap)) { | |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); | |
| qi_flush_piotlb_all(iommu, did, pasid); | |
| } else { | |
| iommu_flush_write_buffer(iommu); | |
| } | |
| } | |
| /* | |
| * This function is supposed to be used after caller updates the fields | |
| * except for the SSADE and P bit of a pasid table entry. It does the | |
| * below: | |
| * - Flush cacheline if needed | |
| * - Flush the caches per Table 28 ”Guidance to Software for Invalidations“ | |
| * of VT-d spec 5.0. | |
| */ | |
| static void intel_pasid_flush_present(struct intel_iommu *iommu, | |
| struct device *dev, | |
| u32 pasid, u16 did, | |
| struct pasid_entry *pte) | |
| { | |
| if (!ecap_coherent(iommu->ecap)) | |
| clflush_cache_range(pte, sizeof(*pte)); | |
| /* | |
| * VT-d spec 5.0 table28 states guides for cache invalidation: | |
| * | |
| * - PASID-selective-within-Domain PASID-cache invalidation | |
| * - PASID-selective PASID-based IOTLB invalidation | |
| * - If (pasid is RID_PASID) | |
| * - Global Device-TLB invalidation to affected functions | |
| * Else | |
| * - PASID-based Device-TLB invalidation (with S=1 and | |
| * Addr[63:12]=0x7FFFFFFF_FFFFF) to affected functions | |
| */ | |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); | |
| qi_flush_piotlb_all(iommu, did, pasid); | |
| devtlb_invalidation_with_pasid(iommu, dev, pasid); | |
| } | |
| /* | |
| * Set up the scalable mode pasid table entry for first only | |
| * translation type. | |
| */ | |
| static void pasid_pte_config_first_level(struct intel_iommu *iommu, | |
| struct pasid_entry *pte, | |
| phys_addr_t fsptptr, u16 did, | |
| int flags) | |
| { | |
| lockdep_assert_held(&iommu->lock); | |
| pasid_clear_entry(pte); | |
| /* Setup the first level page table pointer: */ | |
| pasid_set_flptr(pte, fsptptr); | |
| if (flags & PASID_FLAG_FL5LP) | |
| pasid_set_flpm(pte, 1); | |
| if (flags & PASID_FLAG_PAGE_SNOOP) | |
| pasid_set_pgsnp(pte); | |
| pasid_set_domain_id(pte, did); | |
| pasid_set_address_width(pte, iommu->agaw); | |
| pasid_set_page_snoop(pte, flags & PASID_FLAG_PWSNP); | |
| /* Setup Present and PASID Granular Transfer Type: */ | |
| pasid_set_translation_type(pte, PASID_ENTRY_PGTT_FL_ONLY); | |
| pasid_set_present(pte); | |
| } | |
| int intel_pasid_setup_first_level(struct intel_iommu *iommu, struct device *dev, | |
| phys_addr_t fsptptr, u32 pasid, u16 did, | |
| int flags) | |
| { | |
| struct pasid_entry *pte; | |
| if (!ecap_flts(iommu->ecap)) { | |
| pr_err("No first level translation support on %s\n", | |
| iommu->name); | |
| return -EINVAL; | |
| } | |
| if ((flags & PASID_FLAG_FL5LP) && !cap_fl5lp_support(iommu->cap)) { | |
| pr_err("No 5-level paging support for first-level on %s\n", | |
| iommu->name); | |
| return -EINVAL; | |
| } | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (!pte) { | |
| spin_unlock(&iommu->lock); | |
| return -ENODEV; | |
| } | |
| if (pasid_pte_is_present(pte)) { | |
| spin_unlock(&iommu->lock); | |
| return -EBUSY; | |
| } | |
| pasid_pte_config_first_level(iommu, pte, fsptptr, did, flags); | |
| spin_unlock(&iommu->lock); | |
| pasid_flush_caches(iommu, pte, pasid, did); | |
| return 0; | |
| } | |
| /* | |
| * Set up the scalable mode pasid entry for second only translation type. | |
| */ | |
| static void pasid_pte_config_second_level(struct intel_iommu *iommu, | |
| struct pasid_entry *pte, | |
| struct dmar_domain *domain, u16 did) | |
| { | |
| struct pt_iommu_vtdss_hw_info pt_info; | |
| lockdep_assert_held(&iommu->lock); | |
| pt_iommu_vtdss_hw_info(&domain->sspt, &pt_info); | |
| pasid_clear_entry(pte); | |
| pasid_set_domain_id(pte, did); | |
| pasid_set_slptr(pte, pt_info.ssptptr); | |
| pasid_set_address_width(pte, pt_info.aw); | |
| pasid_set_translation_type(pte, PASID_ENTRY_PGTT_SL_ONLY); | |
| pasid_set_fault_enable(pte); | |
| pasid_set_page_snoop(pte, !(domain->sspt.vtdss_pt.common.features & | |
| BIT(PT_FEAT_DMA_INCOHERENT))); | |
| if (domain->dirty_tracking) | |
| pasid_set_ssade(pte); | |
| pasid_set_present(pte); | |
| } | |
| int intel_pasid_setup_second_level(struct intel_iommu *iommu, | |
| struct dmar_domain *domain, | |
| struct device *dev, u32 pasid) | |
| { | |
| struct pasid_entry *pte; | |
| u16 did; | |
| /* | |
| * If hardware advertises no support for second level | |
| * translation, return directly. | |
| */ | |
| if (!ecap_slts(iommu->ecap)) { | |
| pr_err("No second level translation support on %s\n", | |
| iommu->name); | |
| return -EINVAL; | |
| } | |
| did = domain_id_iommu(domain, iommu); | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (!pte) { | |
| spin_unlock(&iommu->lock); | |
| return -ENODEV; | |
| } | |
| if (pasid_pte_is_present(pte)) { | |
| spin_unlock(&iommu->lock); | |
| return -EBUSY; | |
| } | |
| pasid_pte_config_second_level(iommu, pte, domain, did); | |
| spin_unlock(&iommu->lock); | |
| pasid_flush_caches(iommu, pte, pasid, did); | |
| return 0; | |
| } | |
| /* | |
| * Set up dirty tracking on a second only or nested translation type. | |
| */ | |
| int intel_pasid_setup_dirty_tracking(struct intel_iommu *iommu, | |
| struct device *dev, u32 pasid, | |
| bool enabled) | |
| { | |
| struct pasid_entry *pte; | |
| u16 did, pgtt; | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (!pte) { | |
| spin_unlock(&iommu->lock); | |
| dev_err_ratelimited( | |
| dev, "Failed to get pasid entry of PASID %d\n", pasid); | |
| return -ENODEV; | |
| } | |
| did = pasid_get_domain_id(pte); | |
| pgtt = pasid_pte_get_pgtt(pte); | |
| if (pgtt != PASID_ENTRY_PGTT_SL_ONLY && | |
| pgtt != PASID_ENTRY_PGTT_NESTED) { | |
| spin_unlock(&iommu->lock); | |
| dev_err_ratelimited( | |
| dev, | |
| "Dirty tracking not supported on translation type %d\n", | |
| pgtt); | |
| return -EOPNOTSUPP; | |
| } | |
| if (pasid_get_ssade(pte) == enabled) { | |
| spin_unlock(&iommu->lock); | |
| return 0; | |
| } | |
| if (enabled) | |
| pasid_set_ssade(pte); | |
| else | |
| pasid_clear_ssade(pte); | |
| spin_unlock(&iommu->lock); | |
| if (!ecap_coherent(iommu->ecap)) | |
| clflush_cache_range(pte, sizeof(*pte)); | |
| /* | |
| * From VT-d spec table 25 "Guidance to Software for Invalidations": | |
| * | |
| * - PASID-selective-within-Domain PASID-cache invalidation | |
| * If (PGTT=SS or Nested) | |
| * - Domain-selective IOTLB invalidation | |
| * Else | |
| * - PASID-selective PASID-based IOTLB invalidation | |
| * - If (pasid is RID_PASID) | |
| * - Global Device-TLB invalidation to affected functions | |
| * Else | |
| * - PASID-based Device-TLB invalidation (with S=1 and | |
| * Addr[63:12]=0x7FFFFFFF_FFFFF) to affected functions | |
| */ | |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); | |
| iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH); | |
| devtlb_invalidation_with_pasid(iommu, dev, pasid); | |
| return 0; | |
| } | |
| /* | |
| * Set up the scalable mode pasid entry for passthrough translation type. | |
| */ | |
| static void pasid_pte_config_pass_through(struct intel_iommu *iommu, | |
| struct pasid_entry *pte, u16 did) | |
| { | |
| lockdep_assert_held(&iommu->lock); | |
| pasid_clear_entry(pte); | |
| pasid_set_domain_id(pte, did); | |
| pasid_set_address_width(pte, iommu->agaw); | |
| pasid_set_translation_type(pte, PASID_ENTRY_PGTT_PT); | |
| pasid_set_fault_enable(pte); | |
| pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap)); | |
| pasid_set_present(pte); | |
| } | |
| int intel_pasid_setup_pass_through(struct intel_iommu *iommu, | |
| struct device *dev, u32 pasid) | |
| { | |
| u16 did = FLPT_DEFAULT_DID; | |
| struct pasid_entry *pte; | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (!pte) { | |
| spin_unlock(&iommu->lock); | |
| return -ENODEV; | |
| } | |
| if (pasid_pte_is_present(pte)) { | |
| spin_unlock(&iommu->lock); | |
| return -EBUSY; | |
| } | |
| pasid_pte_config_pass_through(iommu, pte, did); | |
| spin_unlock(&iommu->lock); | |
| pasid_flush_caches(iommu, pte, pasid, did); | |
| return 0; | |
| } | |
| /* | |
| * Set the page snoop control for a pasid entry which has been set up. | |
| */ | |
| void intel_pasid_setup_page_snoop_control(struct intel_iommu *iommu, | |
| struct device *dev, u32 pasid) | |
| { | |
| struct pasid_entry *pte; | |
| u16 did; | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (WARN_ON(!pte || !pasid_pte_is_present(pte))) { | |
| spin_unlock(&iommu->lock); | |
| return; | |
| } | |
| pasid_set_pgsnp(pte); | |
| did = pasid_get_domain_id(pte); | |
| spin_unlock(&iommu->lock); | |
| intel_pasid_flush_present(iommu, dev, pasid, did, pte); | |
| } | |
| static void pasid_pte_config_nested(struct intel_iommu *iommu, | |
| struct pasid_entry *pte, | |
| struct iommu_hwpt_vtd_s1 *s1_cfg, | |
| struct dmar_domain *s2_domain, | |
| u16 did) | |
| { | |
| struct pt_iommu_vtdss_hw_info pt_info; | |
| lockdep_assert_held(&iommu->lock); | |
| pt_iommu_vtdss_hw_info(&s2_domain->sspt, &pt_info); | |
| pasid_clear_entry(pte); | |
| if (s1_cfg->addr_width == ADDR_WIDTH_5LEVEL) | |
| pasid_set_flpm(pte, 1); | |
| pasid_set_flptr(pte, s1_cfg->pgtbl_addr); | |
| if (s1_cfg->flags & IOMMU_VTD_S1_SRE) { | |
| pasid_set_sre(pte); | |
| if (s1_cfg->flags & IOMMU_VTD_S1_WPE) | |
| pasid_set_wpe(pte); | |
| } | |
| if (s1_cfg->flags & IOMMU_VTD_S1_EAFE) | |
| pasid_set_eafe(pte); | |
| if (s2_domain->force_snooping) | |
| pasid_set_pgsnp(pte); | |
| pasid_set_slptr(pte, pt_info.ssptptr); | |
| pasid_set_fault_enable(pte); | |
| pasid_set_domain_id(pte, did); | |
| pasid_set_address_width(pte, pt_info.aw); | |
| pasid_set_page_snoop(pte, !(s2_domain->sspt.vtdss_pt.common.features & | |
| BIT(PT_FEAT_DMA_INCOHERENT))); | |
| if (s2_domain->dirty_tracking) | |
| pasid_set_ssade(pte); | |
| pasid_set_translation_type(pte, PASID_ENTRY_PGTT_NESTED); | |
| pasid_set_present(pte); | |
| } | |
| /** | |
| * intel_pasid_setup_nested() - Set up PASID entry for nested translation. | |
| * @iommu: IOMMU which the device belong to | |
| * @dev: Device to be set up for translation | |
| * @pasid: PASID to be programmed in the device PASID table | |
| * @domain: User stage-1 domain nested on a stage-2 domain | |
| * | |
| * This is used for nested translation. The input domain should be | |
| * nested type and nested on a parent with 'is_nested_parent' flag | |
| * set. | |
| */ | |
| int intel_pasid_setup_nested(struct intel_iommu *iommu, struct device *dev, | |
| u32 pasid, struct dmar_domain *domain) | |
| { | |
| struct iommu_hwpt_vtd_s1 *s1_cfg = &domain->s1_cfg; | |
| struct dmar_domain *s2_domain = domain->s2_domain; | |
| u16 did = domain_id_iommu(domain, iommu); | |
| struct pasid_entry *pte; | |
| /* Address width should match the address width supported by hardware */ | |
| switch (s1_cfg->addr_width) { | |
| case ADDR_WIDTH_4LEVEL: | |
| break; | |
| case ADDR_WIDTH_5LEVEL: | |
| if (!cap_fl5lp_support(iommu->cap)) { | |
| dev_err_ratelimited(dev, | |
| "5-level paging not supported\n"); | |
| return -EINVAL; | |
| } | |
| break; | |
| default: | |
| dev_err_ratelimited(dev, "Invalid stage-1 address width %d\n", | |
| s1_cfg->addr_width); | |
| return -EINVAL; | |
| } | |
| if ((s1_cfg->flags & IOMMU_VTD_S1_SRE) && !ecap_srs(iommu->ecap)) { | |
| pr_err_ratelimited("No supervisor request support on %s\n", | |
| iommu->name); | |
| return -EINVAL; | |
| } | |
| if ((s1_cfg->flags & IOMMU_VTD_S1_EAFE) && !ecap_eafs(iommu->ecap)) { | |
| pr_err_ratelimited("No extended access flag support on %s\n", | |
| iommu->name); | |
| return -EINVAL; | |
| } | |
| spin_lock(&iommu->lock); | |
| pte = intel_pasid_get_entry(dev, pasid); | |
| if (!pte) { | |
| spin_unlock(&iommu->lock); | |
| return -ENODEV; | |
| } | |
| if (pasid_pte_is_present(pte)) { | |
| spin_unlock(&iommu->lock); | |
| return -EBUSY; | |
| } | |
| pasid_pte_config_nested(iommu, pte, s1_cfg, s2_domain, did); | |
| spin_unlock(&iommu->lock); | |
| pasid_flush_caches(iommu, pte, pasid, did); | |
| return 0; | |
| } | |
| /* | |
| * Interfaces to setup or teardown a pasid table to the scalable-mode | |
| * context table entry: | |
| */ | |
| static void device_pasid_table_teardown(struct device *dev, u8 bus, u8 devfn) | |
| { | |
| struct device_domain_info *info = dev_iommu_priv_get(dev); | |
| struct intel_iommu *iommu = info->iommu; | |
| struct context_entry *context; | |
| u16 did; | |
| spin_lock(&iommu->lock); | |
| context = iommu_context_addr(iommu, bus, devfn, false); | |
| if (!context) { | |
| spin_unlock(&iommu->lock); | |
| return; | |
| } | |
| did = context_domain_id(context); | |
| context_clear_present(context); | |
| __iommu_flush_cache(iommu, context, sizeof(*context)); | |
| spin_unlock(&iommu->lock); | |
| intel_context_flush_no_pasid(info, context, did, PCI_DEVID(bus, devfn)); | |
| context_clear_entry(context); | |
| __iommu_flush_cache(iommu, context, sizeof(*context)); | |
| } | |
| static int pci_pasid_table_teardown(struct pci_dev *pdev, u16 alias, void *data) | |
| { | |
| struct device *dev = data; | |
| if (dev == &pdev->dev) | |
| device_pasid_table_teardown(dev, PCI_BUS_NUM(alias), alias & 0xff); | |
| return 0; | |
| } | |
| void intel_pasid_teardown_sm_context(struct device *dev) | |
| { | |
| struct device_domain_info *info = dev_iommu_priv_get(dev); | |
| if (!dev_is_pci(dev)) { | |
| device_pasid_table_teardown(dev, info->bus, info->devfn); | |
| return; | |
| } | |
| pci_for_each_dma_alias(to_pci_dev(dev), pci_pasid_table_teardown, dev); | |
| } | |
| /* | |
| * Get the PASID directory size for scalable mode context entry. | |
| * Value of X in the PDTS field of a scalable mode context entry | |
| * indicates PASID directory with 2^(X + 7) entries. | |
| */ | |
| static unsigned long context_get_sm_pds(struct pasid_table *table) | |
| { | |
| unsigned long pds, max_pde; | |
| max_pde = table->max_pasid >> PASID_PDE_SHIFT; | |
| pds = find_first_bit(&max_pde, MAX_NR_PASID_BITS); | |
| if (pds < 7) | |
| return 0; | |
| return pds - 7; | |
| } | |
| static int context_entry_set_pasid_table(struct context_entry *context, | |
| struct device *dev) | |
| { | |
| struct device_domain_info *info = dev_iommu_priv_get(dev); | |
| struct pasid_table *table = info->pasid_table; | |
| struct intel_iommu *iommu = info->iommu; | |
| unsigned long pds; | |
| context_clear_entry(context); | |
| pds = context_get_sm_pds(table); | |
| context->lo = (u64)virt_to_phys(table->table) | context_pdts(pds); | |
| context_set_sm_rid2pasid(context, IOMMU_NO_PASID); | |
| if (info->ats_supported) | |
| context_set_sm_dte(context); | |
| if (info->pasid_supported) | |
| context_set_pasid(context); | |
| if (info->pri_supported) | |
| context_set_sm_pre(context); | |
| context_set_fault_enable(context); | |
| context_set_present(context); | |
| __iommu_flush_cache(iommu, context, sizeof(*context)); | |
| return 0; | |
| } | |
| static int device_pasid_table_setup(struct device *dev, u8 bus, u8 devfn) | |
| { | |
| struct device_domain_info *info = dev_iommu_priv_get(dev); | |
| struct intel_iommu *iommu = info->iommu; | |
| struct context_entry *context; | |
| spin_lock(&iommu->lock); | |
| context = iommu_context_addr(iommu, bus, devfn, true); | |
| if (!context) { | |
| spin_unlock(&iommu->lock); | |
| return -ENOMEM; | |
| } | |
| if (context_present(context) && !context_copied(iommu, bus, devfn)) { | |
| spin_unlock(&iommu->lock); | |
| return 0; | |
| } | |
| if (context_copied(iommu, bus, devfn)) { | |
| context_clear_present(context); | |
| __iommu_flush_cache(iommu, context, sizeof(*context)); | |
| /* | |
| * For kdump cases, old valid entries may be cached due to | |
| * the in-flight DMA and copied pgtable, but there is no | |
| * unmapping behaviour for them, thus we need explicit cache | |
| * flushes for all affected domain IDs and PASIDs used in | |
| * the copied PASID table. Given that we have no idea about | |
| * which domain IDs and PASIDs were used in the copied tables, | |
| * upgrade them to global PASID and IOTLB cache invalidation. | |
| */ | |
| iommu->flush.flush_context(iommu, 0, | |
| PCI_DEVID(bus, devfn), | |
| DMA_CCMD_MASK_NOBIT, | |
| DMA_CCMD_DEVICE_INVL); | |
| qi_flush_pasid_cache(iommu, 0, QI_PC_GLOBAL, 0); | |
| iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); | |
| devtlb_invalidation_with_pasid(iommu, dev, IOMMU_NO_PASID); | |
| context_clear_entry(context); | |
| __iommu_flush_cache(iommu, context, sizeof(*context)); | |
| /* | |
| * At this point, the device is supposed to finish reset at | |
| * its driver probe stage, so no in-flight DMA will exist, | |
| * and we don't need to worry anymore hereafter. | |
| */ | |
| clear_context_copied(iommu, bus, devfn); | |
| } | |
| context_entry_set_pasid_table(context, dev); | |
| spin_unlock(&iommu->lock); | |
| /* | |
| * It's a non-present to present mapping. If hardware doesn't cache | |
| * non-present entry we don't need to flush the caches. If it does | |
| * cache non-present entries, then it does so in the special | |
| * domain #0, which we have to flush: | |
| */ | |
| if (cap_caching_mode(iommu->cap)) { | |
| iommu->flush.flush_context(iommu, 0, | |
| PCI_DEVID(bus, devfn), | |
| DMA_CCMD_MASK_NOBIT, | |
| DMA_CCMD_DEVICE_INVL); | |
| iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH); | |
| } | |
| return 0; | |
| } | |
| static int pci_pasid_table_setup(struct pci_dev *pdev, u16 alias, void *data) | |
| { | |
| struct device *dev = data; | |
| if (dev != &pdev->dev) | |
| return 0; | |
| return device_pasid_table_setup(dev, PCI_BUS_NUM(alias), alias & 0xff); | |
| } | |
| /* | |
| * Set the device's PASID table to its context table entry. | |
| * | |
| * The PASID table is set to the context entries of both device itself | |
| * and its alias requester ID for DMA. | |
| */ | |
| int intel_pasid_setup_sm_context(struct device *dev) | |
| { | |
| struct device_domain_info *info = dev_iommu_priv_get(dev); | |
| if (!dev_is_pci(dev)) | |
| return device_pasid_table_setup(dev, info->bus, info->devfn); | |
| return pci_for_each_dma_alias(to_pci_dev(dev), pci_pasid_table_setup, dev); | |
| } | |
| /* | |
| * Global Device-TLB invalidation following changes in a context entry which | |
| * was present. | |
| */ | |
| static void __context_flush_dev_iotlb(struct device_domain_info *info) | |
| { | |
| if (!info->ats_enabled) | |
| return; | |
| /* | |
| * Skip dev-IOTLB flush for inaccessible PCIe devices to prevent the | |
| * Intel IOMMU from waiting indefinitely for an ATS invalidation that | |
| * cannot complete. | |
| */ | |
| if (!pci_device_is_present(to_pci_dev(info->dev))) | |
| return; | |
| qi_flush_dev_iotlb(info->iommu, PCI_DEVID(info->bus, info->devfn), | |
| info->pfsid, info->ats_qdep, 0, MAX_AGAW_PFN_WIDTH); | |
| /* | |
| * There is no guarantee that the device DMA is stopped when it reaches | |
| * here. Therefore, always attempt the extra device TLB invalidation | |
| * quirk. The impact on performance is acceptable since this is not a | |
| * performance-critical path. | |
| */ | |
| quirk_extra_dev_tlb_flush(info, 0, MAX_AGAW_PFN_WIDTH, IOMMU_NO_PASID, | |
| info->ats_qdep); | |
| } | |
| /* | |
| * Cache invalidations after change in a context table entry that was present | |
| * according to the Spec 6.5.3.3 (Guidance to Software for Invalidations). | |
| * This helper can only be used when IOMMU is working in the legacy mode or | |
| * IOMMU is in scalable mode but all PASID table entries of the device are | |
| * non-present. | |
| * | |
| * @sid identifies the context entry that was modified, which may be a DMA | |
| * alias of @info->dev rather than its own requester ID. | |
| */ | |
| void intel_context_flush_no_pasid(struct device_domain_info *info, | |
| struct context_entry *context, u16 did, u16 sid) | |
| { | |
| struct intel_iommu *iommu = info->iommu; | |
| /* | |
| * Device-selective context-cache invalidation. The Domain-ID field | |
| * of the Context-cache Invalidate Descriptor is ignored by hardware | |
| * when operating in scalable mode. Therefore the @did value doesn't | |
| * matter in scalable mode. | |
| */ | |
| iommu->flush.flush_context(iommu, did, sid, | |
| DMA_CCMD_MASK_NOBIT, DMA_CCMD_DEVICE_INVL); | |
| /* | |
| * For legacy mode: | |
| * - Domain-selective IOTLB invalidation | |
| * - Global Device-TLB invalidation to all affected functions | |
| */ | |
| if (!sm_supported(iommu)) { | |
| iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH); | |
| __context_flush_dev_iotlb(info); | |
| return; | |
| } | |
| __context_flush_dev_iotlb(info); | |
| } |