| // SPDX-License-Identifier: GPL-2.0 | |
| #define pr_fmt(fmt) "DMAR-IR: " fmt | |
| #include <linux/interrupt.h> | |
| #include <linux/dmar.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/hpet.h> | |
| #include <linux/pci.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqchip/irq-msi-lib.h> | |
| #include <linux/acpi.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/crash_dump.h> | |
| #include <asm/io_apic.h> | |
| #include <asm/apic.h> | |
| #include <asm/smp.h> | |
| #include <asm/cpu.h> | |
| #include <asm/irq_remapping.h> | |
| #include <asm/pci-direct.h> | |
| #include <asm/posted_intr.h> | |
| #include "iommu.h" | |
| #include "../irq_remapping.h" | |
| #include "../iommu-pages.h" | |
| struct ioapic_scope { | |
| struct intel_iommu *iommu; | |
| unsigned int id; | |
| unsigned int bus; /* PCI bus number */ | |
| unsigned int devfn; /* PCI devfn number */ | |
| }; | |
| struct hpet_scope { | |
| struct intel_iommu *iommu; | |
| u8 id; | |
| unsigned int bus; | |
| unsigned int devfn; | |
| }; | |
| struct irq_2_iommu { | |
| struct intel_iommu *iommu; | |
| u16 irte_index; | |
| u16 sub_handle; | |
| u8 irte_mask; | |
| bool posted_msi; | |
| bool posted_vcpu; | |
| }; | |
| struct intel_ir_data { | |
| struct irq_2_iommu irq_2_iommu; | |
| struct irte irte_entry; | |
| union { | |
| struct msi_msg msi_entry; | |
| }; | |
| }; | |
| #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0) | |
| #define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8) | |
| static int __read_mostly eim_mode; | |
| static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; | |
| static struct hpet_scope ir_hpet[MAX_HPET_TBS]; | |
| /* | |
| * Lock ordering: | |
| * ->dmar_global_lock | |
| * ->irq_2_ir_lock | |
| * ->qi->q_lock | |
| * ->iommu->register_lock | |
| * Note: | |
| * intel_irq_remap_ops.{supported,prepare,enable,disable,reenable} are called | |
| * in single-threaded environment with interrupt disabled, so no need to tabke | |
| * the dmar_global_lock. | |
| */ | |
| DEFINE_RAW_SPINLOCK(irq_2_ir_lock); | |
| static const struct irq_domain_ops intel_ir_domain_ops; | |
| static void iommu_disable_irq_remapping(struct intel_iommu *iommu); | |
| static int __init parse_ioapics_under_ir(void); | |
| static const struct msi_parent_ops dmar_msi_parent_ops; | |
| static bool ir_pre_enabled(struct intel_iommu *iommu) | |
| { | |
| return (iommu->flags & VTD_FLAG_IRQ_REMAP_PRE_ENABLED); | |
| } | |
| static void clear_ir_pre_enabled(struct intel_iommu *iommu) | |
| { | |
| iommu->flags &= ~VTD_FLAG_IRQ_REMAP_PRE_ENABLED; | |
| } | |
| static void init_ir_status(struct intel_iommu *iommu) | |
| { | |
| u32 gsts; | |
| gsts = readl(iommu->reg + DMAR_GSTS_REG); | |
| if (gsts & DMA_GSTS_IRES) | |
| iommu->flags |= VTD_FLAG_IRQ_REMAP_PRE_ENABLED; | |
| } | |
| static int alloc_irte(struct intel_iommu *iommu, | |
| struct irq_2_iommu *irq_iommu, u16 count) | |
| { | |
| struct ir_table *table = iommu->ir_table; | |
| unsigned int mask = 0; | |
| unsigned long flags; | |
| int index; | |
| if (!count || !irq_iommu) | |
| return -1; | |
| if (count > 1) { | |
| count = __roundup_pow_of_two(count); | |
| mask = ilog2(count); | |
| } | |
| if (mask > ecap_max_handle_mask(iommu->ecap)) { | |
| pr_err("Requested mask %x exceeds the max invalidation handle" | |
| " mask value %Lx\n", mask, | |
| ecap_max_handle_mask(iommu->ecap)); | |
| return -1; | |
| } | |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); | |
| index = bitmap_find_free_region(table->bitmap, | |
| INTR_REMAP_TABLE_ENTRIES, mask); | |
| if (index < 0) { | |
| pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id); | |
| } else { | |
| irq_iommu->iommu = iommu; | |
| irq_iommu->irte_index = index; | |
| irq_iommu->sub_handle = 0; | |
| irq_iommu->irte_mask = mask; | |
| } | |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); | |
| return index; | |
| } | |
| static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask) | |
| { | |
| struct qi_desc desc; | |
| desc.qw0 = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask) | |
| | QI_IEC_SELECTIVE; | |
| desc.qw1 = 0; | |
| desc.qw2 = 0; | |
| desc.qw3 = 0; | |
| return qi_submit_sync(iommu, &desc, 1, 0); | |
| } | |
| static int modify_irte(struct irq_2_iommu *irq_iommu, | |
| struct irte *irte_modified) | |
| { | |
| struct intel_iommu *iommu; | |
| unsigned long flags; | |
| struct irte *irte; | |
| int rc, index; | |
| if (!irq_iommu) | |
| return -1; | |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); | |
| iommu = irq_iommu->iommu; | |
| index = irq_iommu->irte_index + irq_iommu->sub_handle; | |
| irte = &iommu->ir_table->base[index]; | |
| if ((irte->pst == 1) || (irte_modified->pst == 1)) { | |
| /* | |
| * We use cmpxchg16 to atomically update the 128-bit IRTE, | |
| * and it cannot be updated by the hardware or other processors | |
| * behind us, so the return value of cmpxchg16 should be the | |
| * same as the old value. | |
| */ | |
| u128 old = irte->irte; | |
| WARN_ON(!try_cmpxchg128(&irte->irte, &old, irte_modified->irte)); | |
| } else { | |
| WRITE_ONCE(irte->low, irte_modified->low); | |
| WRITE_ONCE(irte->high, irte_modified->high); | |
| } | |
| __iommu_flush_cache(iommu, irte, sizeof(*irte)); | |
| rc = qi_flush_iec(iommu, index, 0); | |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); | |
| return rc; | |
| } | |
| static struct intel_iommu *map_hpet_to_iommu(u8 hpet_id) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_HPET_TBS; i++) { | |
| if (ir_hpet[i].id == hpet_id && ir_hpet[i].iommu) | |
| return ir_hpet[i].iommu; | |
| } | |
| return NULL; | |
| } | |
| static struct intel_iommu *map_ioapic_to_iommu(int apic) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_IO_APICS; i++) { | |
| if (ir_ioapic[i].id == apic && ir_ioapic[i].iommu) | |
| return ir_ioapic[i].iommu; | |
| } | |
| return NULL; | |
| } | |
| static struct irq_domain *map_dev_to_ir(struct pci_dev *dev) | |
| { | |
| struct dmar_drhd_unit *drhd = dmar_find_matched_drhd_unit(dev); | |
| return drhd ? drhd->iommu->ir_domain : NULL; | |
| } | |
| static int clear_entries(struct irq_2_iommu *irq_iommu) | |
| { | |
| struct irte *start, *entry, *end; | |
| struct intel_iommu *iommu; | |
| int index; | |
| if (irq_iommu->sub_handle) | |
| return 0; | |
| iommu = irq_iommu->iommu; | |
| index = irq_iommu->irte_index; | |
| start = iommu->ir_table->base + index; | |
| end = start + (1 << irq_iommu->irte_mask); | |
| for (entry = start; entry < end; entry++) { | |
| WRITE_ONCE(entry->low, 0); | |
| WRITE_ONCE(entry->high, 0); | |
| } | |
| bitmap_release_region(iommu->ir_table->bitmap, index, | |
| irq_iommu->irte_mask); | |
| return qi_flush_iec(iommu, index, irq_iommu->irte_mask); | |
| } | |
| /* | |
| * source validation type | |
| */ | |
| #define SVT_NO_VERIFY 0x0 /* no verification is required */ | |
| #define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fields */ | |
| #define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */ | |
| /* | |
| * source-id qualifier | |
| */ | |
| #define SQ_ALL_16 0x0 /* verify all 16 bits of request-id */ | |
| #define SQ_13_IGNORE_1 0x1 /* verify most significant 13 bits, ignore | |
| * the third least significant bit | |
| */ | |
| #define SQ_13_IGNORE_2 0x2 /* verify most significant 13 bits, ignore | |
| * the second and third least significant bits | |
| */ | |
| #define SQ_13_IGNORE_3 0x3 /* verify most significant 13 bits, ignore | |
| * the least three significant bits | |
| */ | |
| /* | |
| * set SVT, SQ and SID fields of irte to verify | |
| * source ids of interrupt requests | |
| */ | |
| static void set_irte_sid(struct irte *irte, unsigned int svt, | |
| unsigned int sq, unsigned int sid) | |
| { | |
| if (disable_sourceid_checking) | |
| svt = SVT_NO_VERIFY; | |
| irte->svt = svt; | |
| irte->sq = sq; | |
| irte->sid = sid; | |
| } | |
| /* | |
| * Set an IRTE to match only the bus number. Interrupt requests that reference | |
| * this IRTE must have a requester-id whose bus number is between or equal | |
| * to the start_bus and end_bus arguments. | |
| */ | |
| static void set_irte_verify_bus(struct irte *irte, unsigned int start_bus, | |
| unsigned int end_bus) | |
| { | |
| set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, | |
| (start_bus << 8) | end_bus); | |
| } | |
| static int set_ioapic_sid(struct irte *irte, int apic) | |
| { | |
| int i; | |
| u16 sid = 0; | |
| if (!irte) | |
| return -1; | |
| for (i = 0; i < MAX_IO_APICS; i++) { | |
| if (ir_ioapic[i].iommu && ir_ioapic[i].id == apic) { | |
| sid = PCI_DEVID(ir_ioapic[i].bus, ir_ioapic[i].devfn); | |
| break; | |
| } | |
| } | |
| if (sid == 0) { | |
| pr_warn("Failed to set source-id of IOAPIC (%d)\n", apic); | |
| return -1; | |
| } | |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, sid); | |
| return 0; | |
| } | |
| static int set_hpet_sid(struct irte *irte, u8 id) | |
| { | |
| int i; | |
| u16 sid = 0; | |
| if (!irte) | |
| return -1; | |
| for (i = 0; i < MAX_HPET_TBS; i++) { | |
| if (ir_hpet[i].iommu && ir_hpet[i].id == id) { | |
| sid = PCI_DEVID(ir_hpet[i].bus, ir_hpet[i].devfn); | |
| break; | |
| } | |
| } | |
| if (sid == 0) { | |
| pr_warn("Failed to set source-id of HPET block (%d)\n", id); | |
| return -1; | |
| } | |
| /* | |
| * Should really use SQ_ALL_16. Some platforms are broken. | |
| * While we figure out the right quirks for these broken platforms, use | |
| * SQ_13_IGNORE_3 for now. | |
| */ | |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_13_IGNORE_3, sid); | |
| return 0; | |
| } | |
| struct set_msi_sid_data { | |
| struct pci_dev *pdev; | |
| u16 alias; | |
| int count; | |
| int busmatch_count; | |
| }; | |
| static int set_msi_sid_cb(struct pci_dev *pdev, u16 alias, void *opaque) | |
| { | |
| struct set_msi_sid_data *data = opaque; | |
| if (data->count == 0 || PCI_BUS_NUM(alias) == PCI_BUS_NUM(data->alias)) | |
| data->busmatch_count++; | |
| data->pdev = pdev; | |
| data->alias = alias; | |
| data->count++; | |
| return 0; | |
| } | |
| static int set_msi_sid(struct irte *irte, struct pci_dev *dev) | |
| { | |
| struct set_msi_sid_data data; | |
| if (!irte || !dev) | |
| return -1; | |
| data.count = 0; | |
| data.busmatch_count = 0; | |
| pci_for_each_dma_alias(dev, set_msi_sid_cb, &data); | |
| /* | |
| * DMA alias provides us with a PCI device and alias. The only case | |
| * where the it will return an alias on a different bus than the | |
| * device is the case of a PCIe-to-PCI bridge, where the alias is for | |
| * the subordinate bus. In this case we can only verify the bus. | |
| * | |
| * If there are multiple aliases, all with the same bus number, | |
| * then all we can do is verify the bus. This is typical in NTB | |
| * hardware which use proxy IDs where the device will generate traffic | |
| * from multiple devfn numbers on the same bus. | |
| * | |
| * If the alias device is on a different bus than our source device | |
| * then we have a topology based alias, use it. | |
| * | |
| * Otherwise, the alias is for a device DMA quirk and we cannot | |
| * assume that MSI uses the same requester ID. Therefore use the | |
| * original device. | |
| */ | |
| if (PCI_BUS_NUM(data.alias) != data.pdev->bus->number) | |
| set_irte_verify_bus(irte, PCI_BUS_NUM(data.alias), | |
| dev->bus->number); | |
| else if (data.count >= 2 && data.busmatch_count == data.count) | |
| set_irte_verify_bus(irte, dev->bus->number, dev->bus->number); | |
| else if (data.pdev->bus->number != dev->bus->number) | |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias); | |
| else | |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, | |
| pci_dev_id(dev)); | |
| return 0; | |
| } | |
| static int iommu_load_old_irte(struct intel_iommu *iommu) | |
| { | |
| struct irte *old_ir_table; | |
| phys_addr_t irt_phys; | |
| unsigned int i; | |
| size_t size; | |
| u64 irta; | |
| /* Check whether the old ir-table has the same size as ours */ | |
| irta = readq(iommu->reg + DMAR_IRTA_REG); | |
| if ((irta & INTR_REMAP_TABLE_REG_SIZE_MASK) | |
| != INTR_REMAP_TABLE_REG_SIZE) | |
| return -EINVAL; | |
| irt_phys = irta & VTD_PAGE_MASK; | |
| size = INTR_REMAP_TABLE_ENTRIES*sizeof(struct irte); | |
| /* Map the old IR table */ | |
| old_ir_table = memremap(irt_phys, size, MEMREMAP_WB); | |
| if (!old_ir_table) | |
| return -ENOMEM; | |
| /* Copy data over */ | |
| memcpy(iommu->ir_table->base, old_ir_table, size); | |
| __iommu_flush_cache(iommu, iommu->ir_table->base, size); | |
| /* | |
| * Now check the table for used entries and mark those as | |
| * allocated in the bitmap | |
| */ | |
| for (i = 0; i < INTR_REMAP_TABLE_ENTRIES; i++) { | |
| if (iommu->ir_table->base[i].present) | |
| bitmap_set(iommu->ir_table->bitmap, i, 1); | |
| } | |
| memunmap(old_ir_table); | |
| return 0; | |
| } | |
| static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode) | |
| { | |
| unsigned long flags; | |
| u64 addr; | |
| u32 sts; | |
| addr = virt_to_phys((void *)iommu->ir_table->base); | |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); | |
| writeq((addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE, | |
| iommu->reg + DMAR_IRTA_REG); | |
| /* Set interrupt-remapping table pointer */ | |
| writel(iommu->gcmd | DMA_GCMD_SIRTP, iommu->reg + DMAR_GCMD_REG); | |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, | |
| readl, (sts & DMA_GSTS_IRTPS), sts); | |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); | |
| /* | |
| * Global invalidation of interrupt entry cache to make sure the | |
| * hardware uses the new irq remapping table. | |
| */ | |
| if (!cap_esirtps(iommu->cap)) | |
| qi_global_iec(iommu); | |
| } | |
| static void iommu_enable_irq_remapping(struct intel_iommu *iommu) | |
| { | |
| unsigned long flags; | |
| u32 sts; | |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); | |
| /* Enable interrupt-remapping */ | |
| iommu->gcmd |= DMA_GCMD_IRE; | |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); | |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, | |
| readl, (sts & DMA_GSTS_IRES), sts); | |
| /* Block compatibility-format MSIs */ | |
| if (sts & DMA_GSTS_CFIS) { | |
| iommu->gcmd &= ~DMA_GCMD_CFI; | |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); | |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, | |
| readl, !(sts & DMA_GSTS_CFIS), sts); | |
| } | |
| /* | |
| * With CFI clear in the Global Command register, we should be | |
| * protected from dangerous (i.e. compatibility) interrupts | |
| * regardless of x2apic status. Check just to be sure. | |
| */ | |
| if (sts & DMA_GSTS_CFIS) | |
| WARN(1, KERN_WARNING | |
| "Compatibility-format IRQs enabled despite intr remapping;\n" | |
| "you are vulnerable to IRQ injection.\n"); | |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); | |
| } | |
| static int intel_setup_irq_remapping(struct intel_iommu *iommu) | |
| { | |
| struct irq_domain_info info = { | |
| .ops = &intel_ir_domain_ops, | |
| .parent = arch_get_ir_parent_domain(), | |
| .domain_flags = IRQ_DOMAIN_FLAG_ISOLATED_MSI, | |
| .size = INTR_REMAP_TABLE_ENTRIES, | |
| .host_data = iommu, | |
| }; | |
| struct ir_table *ir_table; | |
| unsigned long *bitmap; | |
| void *ir_table_base; | |
| if (iommu->ir_table) | |
| return 0; | |
| ir_table = kzalloc_obj(struct ir_table); | |
| if (!ir_table) | |
| return -ENOMEM; | |
| /* 1MB - maximum possible interrupt remapping table size */ | |
| ir_table_base = | |
| iommu_alloc_pages_node_sz(iommu->node, GFP_KERNEL, SZ_1M); | |
| if (!ir_table_base) { | |
| pr_err("IR%d: failed to allocate 1M of pages\n", iommu->seq_id); | |
| goto out_free_table; | |
| } | |
| bitmap = bitmap_zalloc(INTR_REMAP_TABLE_ENTRIES, GFP_KERNEL); | |
| if (bitmap == NULL) { | |
| pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id); | |
| goto out_free_pages; | |
| } | |
| info.fwnode = irq_domain_alloc_named_id_fwnode("INTEL-IR", iommu->seq_id); | |
| if (!info.fwnode) | |
| goto out_free_bitmap; | |
| iommu->ir_domain = msi_create_parent_irq_domain(&info, &dmar_msi_parent_ops); | |
| if (!iommu->ir_domain) { | |
| pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id); | |
| goto out_free_fwnode; | |
| } | |
| ir_table->base = ir_table_base; | |
| ir_table->bitmap = bitmap; | |
| iommu->ir_table = ir_table; | |
| /* | |
| * If the queued invalidation is already initialized, | |
| * shouldn't disable it. | |
| */ | |
| if (!iommu->qi) { | |
| /* | |
| * Clear previous faults. | |
| */ | |
| dmar_fault(-1, iommu); | |
| dmar_disable_qi(iommu); | |
| if (dmar_enable_qi(iommu)) { | |
| pr_err("Failed to enable queued invalidation\n"); | |
| goto out_free_ir_domain; | |
| } | |
| } | |
| init_ir_status(iommu); | |
| if (ir_pre_enabled(iommu)) { | |
| if (!is_kdump_kernel()) { | |
| pr_info_once("IRQ remapping was enabled on %s but we are not in kdump mode\n", | |
| iommu->name); | |
| clear_ir_pre_enabled(iommu); | |
| iommu_disable_irq_remapping(iommu); | |
| } else if (iommu_load_old_irte(iommu)) | |
| pr_err("Failed to copy IR table for %s from previous kernel\n", | |
| iommu->name); | |
| else | |
| pr_info("Copied IR table for %s from previous kernel\n", | |
| iommu->name); | |
| } | |
| iommu_set_irq_remapping(iommu, eim_mode); | |
| return 0; | |
| out_free_ir_domain: | |
| irq_domain_remove(iommu->ir_domain); | |
| iommu->ir_domain = NULL; | |
| out_free_fwnode: | |
| irq_domain_free_fwnode(info.fwnode); | |
| out_free_bitmap: | |
| bitmap_free(bitmap); | |
| out_free_pages: | |
| iommu_free_pages(ir_table_base); | |
| out_free_table: | |
| kfree(ir_table); | |
| iommu->ir_table = NULL; | |
| return -ENOMEM; | |
| } | |
| static void intel_teardown_irq_remapping(struct intel_iommu *iommu) | |
| { | |
| struct fwnode_handle *fn; | |
| if (iommu && iommu->ir_table) { | |
| if (iommu->ir_domain) { | |
| fn = iommu->ir_domain->fwnode; | |
| irq_domain_remove(iommu->ir_domain); | |
| irq_domain_free_fwnode(fn); | |
| iommu->ir_domain = NULL; | |
| } | |
| iommu_free_pages(iommu->ir_table->base); | |
| bitmap_free(iommu->ir_table->bitmap); | |
| kfree(iommu->ir_table); | |
| iommu->ir_table = NULL; | |
| } | |
| } | |
| /* | |
| * Disable Interrupt Remapping. | |
| */ | |
| static void iommu_disable_irq_remapping(struct intel_iommu *iommu) | |
| { | |
| unsigned long flags; | |
| u32 sts; | |
| if (!ecap_ir_support(iommu->ecap)) | |
| return; | |
| /* | |
| * global invalidation of interrupt entry cache before disabling | |
| * interrupt-remapping. | |
| */ | |
| if (!cap_esirtps(iommu->cap)) | |
| qi_global_iec(iommu); | |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); | |
| sts = readl(iommu->reg + DMAR_GSTS_REG); | |
| if (!(sts & DMA_GSTS_IRES)) | |
| goto end; | |
| iommu->gcmd &= ~DMA_GCMD_IRE; | |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); | |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, | |
| readl, !(sts & DMA_GSTS_IRES), sts); | |
| end: | |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); | |
| } | |
| static int __init dmar_x2apic_optout(void) | |
| { | |
| struct acpi_table_dmar *dmar; | |
| dmar = (struct acpi_table_dmar *)dmar_tbl; | |
| if (!dmar || no_x2apic_optout) | |
| return 0; | |
| return dmar->flags & DMAR_X2APIC_OPT_OUT; | |
| } | |
| static void __init intel_cleanup_irq_remapping(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu; | |
| for_each_iommu(iommu, drhd) { | |
| if (ecap_ir_support(iommu->ecap)) { | |
| iommu_disable_irq_remapping(iommu); | |
| intel_teardown_irq_remapping(iommu); | |
| } | |
| } | |
| if (x2apic_supported()) | |
| pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n"); | |
| } | |
| static int __init intel_prepare_irq_remapping(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu; | |
| int eim = 0; | |
| if (irq_remap_broken) { | |
| pr_warn("This system BIOS has enabled interrupt remapping\n" | |
| "on a chipset that contains an erratum making that\n" | |
| "feature unstable. To maintain system stability\n" | |
| "interrupt remapping is being disabled. Please\n" | |
| "contact your BIOS vendor for an update\n"); | |
| add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); | |
| return -ENODEV; | |
| } | |
| if (dmar_table_init() < 0) | |
| return -ENODEV; | |
| if (!dmar_ir_support()) | |
| return -ENODEV; | |
| if (parse_ioapics_under_ir()) { | |
| pr_info("Not enabling interrupt remapping\n"); | |
| goto error; | |
| } | |
| /* First make sure all IOMMUs support IRQ remapping */ | |
| for_each_iommu(iommu, drhd) | |
| if (!ecap_ir_support(iommu->ecap)) | |
| goto error; | |
| /* Detect remapping mode: lapic or x2apic */ | |
| if (x2apic_supported()) { | |
| eim = !dmar_x2apic_optout(); | |
| if (!eim) { | |
| pr_info("x2apic is disabled because BIOS sets x2apic opt out bit."); | |
| pr_info("Use 'intremap=no_x2apic_optout' to override the BIOS setting.\n"); | |
| } | |
| } | |
| for_each_iommu(iommu, drhd) { | |
| if (eim && !ecap_eim_support(iommu->ecap)) { | |
| pr_info("%s does not support EIM\n", iommu->name); | |
| eim = 0; | |
| } | |
| } | |
| eim_mode = eim; | |
| if (eim) | |
| pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n"); | |
| /* Do the initializations early */ | |
| for_each_iommu(iommu, drhd) { | |
| if (intel_setup_irq_remapping(iommu)) { | |
| pr_err("Failed to setup irq remapping for %s\n", | |
| iommu->name); | |
| goto error; | |
| } | |
| } | |
| return 0; | |
| error: | |
| intel_cleanup_irq_remapping(); | |
| return -ENODEV; | |
| } | |
| /* | |
| * Set Posted-Interrupts capability. | |
| */ | |
| static inline void set_irq_posting_cap(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu; | |
| if (!disable_irq_post) { | |
| /* | |
| * If IRTE is in posted format, the 'pda' field goes across the | |
| * 64-bit boundary, we need use cmpxchg16b to atomically update | |
| * it. We only expose posted-interrupt when X86_FEATURE_CX16 | |
| * is supported. Actually, hardware platforms supporting PI | |
| * should have X86_FEATURE_CX16 support, this has been confirmed | |
| * with Intel hardware guys. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_CX16)) | |
| intel_irq_remap_ops.capability |= 1 << IRQ_POSTING_CAP; | |
| for_each_iommu(iommu, drhd) | |
| if (!cap_pi_support(iommu->cap)) { | |
| intel_irq_remap_ops.capability &= | |
| ~(1 << IRQ_POSTING_CAP); | |
| break; | |
| } | |
| } | |
| } | |
| static int __init intel_enable_irq_remapping(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu; | |
| bool setup = false; | |
| /* | |
| * Setup Interrupt-remapping for all the DRHD's now. | |
| */ | |
| for_each_iommu(iommu, drhd) { | |
| if (!ir_pre_enabled(iommu)) | |
| iommu_enable_irq_remapping(iommu); | |
| setup = true; | |
| } | |
| if (!setup) | |
| goto error; | |
| irq_remapping_enabled = 1; | |
| set_irq_posting_cap(); | |
| pr_info("Enabled IRQ remapping in %s mode\n", eim_mode ? "x2apic" : "xapic"); | |
| return eim_mode ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE; | |
| error: | |
| intel_cleanup_irq_remapping(); | |
| return -1; | |
| } | |
| static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope, | |
| struct intel_iommu *iommu, | |
| struct acpi_dmar_hardware_unit *drhd) | |
| { | |
| struct acpi_dmar_pci_path *path; | |
| u8 bus; | |
| int count, free = -1; | |
| bus = scope->bus; | |
| path = (struct acpi_dmar_pci_path *)(scope + 1); | |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) | |
| / sizeof(struct acpi_dmar_pci_path); | |
| while (--count > 0) { | |
| /* | |
| * Access PCI directly due to the PCI | |
| * subsystem isn't initialized yet. | |
| */ | |
| bus = read_pci_config_byte(bus, path->device, path->function, | |
| PCI_SECONDARY_BUS); | |
| path++; | |
| } | |
| for (count = 0; count < MAX_HPET_TBS; count++) { | |
| if (ir_hpet[count].iommu == iommu && | |
| ir_hpet[count].id == scope->enumeration_id) | |
| return 0; | |
| else if (ir_hpet[count].iommu == NULL && free == -1) | |
| free = count; | |
| } | |
| if (free == -1) { | |
| pr_warn("Exceeded Max HPET blocks\n"); | |
| return -ENOSPC; | |
| } | |
| ir_hpet[free].iommu = iommu; | |
| ir_hpet[free].id = scope->enumeration_id; | |
| ir_hpet[free].bus = bus; | |
| ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function); | |
| pr_info("HPET id %d under DRHD base 0x%Lx\n", | |
| scope->enumeration_id, drhd->address); | |
| return 0; | |
| } | |
| static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope, | |
| struct intel_iommu *iommu, | |
| struct acpi_dmar_hardware_unit *drhd) | |
| { | |
| struct acpi_dmar_pci_path *path; | |
| u8 bus; | |
| int count, free = -1; | |
| bus = scope->bus; | |
| path = (struct acpi_dmar_pci_path *)(scope + 1); | |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) | |
| / sizeof(struct acpi_dmar_pci_path); | |
| while (--count > 0) { | |
| /* | |
| * Access PCI directly due to the PCI | |
| * subsystem isn't initialized yet. | |
| */ | |
| bus = read_pci_config_byte(bus, path->device, path->function, | |
| PCI_SECONDARY_BUS); | |
| path++; | |
| } | |
| for (count = 0; count < MAX_IO_APICS; count++) { | |
| if (ir_ioapic[count].iommu == iommu && | |
| ir_ioapic[count].id == scope->enumeration_id) | |
| return 0; | |
| else if (ir_ioapic[count].iommu == NULL && free == -1) | |
| free = count; | |
| } | |
| if (free == -1) { | |
| pr_warn("Exceeded Max IO APICS\n"); | |
| return -ENOSPC; | |
| } | |
| ir_ioapic[free].bus = bus; | |
| ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function); | |
| ir_ioapic[free].iommu = iommu; | |
| ir_ioapic[free].id = scope->enumeration_id; | |
| pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n", | |
| scope->enumeration_id, drhd->address, iommu->seq_id); | |
| return 0; | |
| } | |
| static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header, | |
| struct intel_iommu *iommu) | |
| { | |
| int ret = 0; | |
| struct acpi_dmar_hardware_unit *drhd; | |
| struct acpi_dmar_device_scope *scope; | |
| void *start, *end; | |
| drhd = (struct acpi_dmar_hardware_unit *)header; | |
| start = (void *)(drhd + 1); | |
| end = ((void *)drhd) + header->length; | |
| while (start < end && ret == 0) { | |
| scope = start; | |
| if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) | |
| ret = ir_parse_one_ioapic_scope(scope, iommu, drhd); | |
| else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) | |
| ret = ir_parse_one_hpet_scope(scope, iommu, drhd); | |
| start += scope->length; | |
| } | |
| return ret; | |
| } | |
| static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_HPET_TBS; i++) | |
| if (ir_hpet[i].iommu == iommu) | |
| ir_hpet[i].iommu = NULL; | |
| for (i = 0; i < MAX_IO_APICS; i++) | |
| if (ir_ioapic[i].iommu == iommu) | |
| ir_ioapic[i].iommu = NULL; | |
| } | |
| /* | |
| * Finds the assocaition between IOAPIC's and its Interrupt-remapping | |
| * hardware unit. | |
| */ | |
| static int __init parse_ioapics_under_ir(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu; | |
| bool ir_supported = false; | |
| int ioapic_idx; | |
| for_each_iommu(iommu, drhd) { | |
| int ret; | |
| if (!ecap_ir_support(iommu->ecap)) | |
| continue; | |
| ret = ir_parse_ioapic_hpet_scope(drhd->hdr, iommu); | |
| if (ret) | |
| return ret; | |
| ir_supported = true; | |
| } | |
| if (!ir_supported) | |
| return -ENODEV; | |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { | |
| int ioapic_id = mpc_ioapic_id(ioapic_idx); | |
| if (!map_ioapic_to_iommu(ioapic_id)) { | |
| pr_err(FW_BUG "ioapic %d has no mapping iommu, " | |
| "interrupt remapping will be disabled\n", | |
| ioapic_id); | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int __init ir_dev_scope_init(void) | |
| { | |
| int ret; | |
| if (!irq_remapping_enabled) | |
| return 0; | |
| down_write(&dmar_global_lock); | |
| ret = dmar_dev_scope_init(); | |
| up_write(&dmar_global_lock); | |
| return ret; | |
| } | |
| rootfs_initcall(ir_dev_scope_init); | |
| static void disable_irq_remapping(void) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| struct intel_iommu *iommu = NULL; | |
| /* | |
| * Disable Interrupt-remapping for all the DRHD's now. | |
| */ | |
| for_each_iommu(iommu, drhd) { | |
| if (!ecap_ir_support(iommu->ecap)) | |
| continue; | |
| iommu_disable_irq_remapping(iommu); | |
| } | |
| /* | |
| * Clear Posted-Interrupts capability. | |
| */ | |
| if (!disable_irq_post) | |
| intel_irq_remap_ops.capability &= ~(1 << IRQ_POSTING_CAP); | |
| } | |
| static int reenable_irq_remapping(int eim) | |
| { | |
| struct dmar_drhd_unit *drhd; | |
| bool setup = false; | |
| struct intel_iommu *iommu = NULL; | |
| for_each_iommu(iommu, drhd) | |
| if (iommu->qi) | |
| dmar_reenable_qi(iommu); | |
| /* | |
| * Setup Interrupt-remapping for all the DRHD's now. | |
| */ | |
| for_each_iommu(iommu, drhd) { | |
| if (!ecap_ir_support(iommu->ecap)) | |
| continue; | |
| /* Set up interrupt remapping for iommu.*/ | |
| iommu_set_irq_remapping(iommu, eim); | |
| iommu_enable_irq_remapping(iommu); | |
| setup = true; | |
| } | |
| if (!setup) | |
| goto error; | |
| set_irq_posting_cap(); | |
| return 0; | |
| error: | |
| /* | |
| * handle error condition gracefully here! | |
| */ | |
| return -1; | |
| } | |
| /* | |
| * Store the MSI remapping domain pointer in the device if enabled. | |
| * | |
| * This is called from dmar_pci_bus_add_dev() so it works even when DMA | |
| * remapping is disabled. Only update the pointer if the device is not | |
| * already handled by a non default PCI/MSI interrupt domain. This protects | |
| * e.g. VMD devices. | |
| */ | |
| void intel_irq_remap_add_device(struct dmar_pci_notify_info *info) | |
| { | |
| if (!irq_remapping_enabled || !pci_dev_has_default_msi_parent_domain(info->dev)) | |
| return; | |
| dev_set_msi_domain(&info->dev->dev, map_dev_to_ir(info->dev)); | |
| } | |
| static void prepare_irte(struct irte *irte, int vector, unsigned int dest) | |
| { | |
| memset(irte, 0, sizeof(*irte)); | |
| irte->present = 1; | |
| irte->dst_mode = apic->dest_mode_logical; | |
| /* | |
| * Trigger mode in the IRTE will always be edge, and for IO-APIC, the | |
| * actual level or edge trigger will be setup in the IO-APIC | |
| * RTE. This will help simplify level triggered irq migration. | |
| * For more details, see the comments (in io_apic.c) explainig IO-APIC | |
| * irq migration in the presence of interrupt-remapping. | |
| */ | |
| irte->trigger_mode = 0; | |
| irte->dlvry_mode = APIC_DELIVERY_MODE_FIXED; | |
| irte->vector = vector; | |
| irte->dest_id = IRTE_DEST(dest); | |
| irte->redir_hint = 1; | |
| } | |
| static void prepare_irte_posted(struct irte *irte) | |
| { | |
| memset(irte, 0, sizeof(*irte)); | |
| irte->present = 1; | |
| irte->p_pst = 1; | |
| } | |
| struct irq_remap_ops intel_irq_remap_ops = { | |
| .prepare = intel_prepare_irq_remapping, | |
| .enable = intel_enable_irq_remapping, | |
| .disable = disable_irq_remapping, | |
| .reenable = reenable_irq_remapping, | |
| .enable_faulting = enable_drhd_fault_handling, | |
| }; | |
| #ifdef CONFIG_X86_POSTED_MSI | |
| static phys_addr_t get_pi_desc_addr(struct irq_data *irqd) | |
| { | |
| int cpu = cpumask_first(irq_data_get_effective_affinity_mask(irqd)); | |
| if (WARN_ON(cpu >= nr_cpu_ids)) | |
| return 0; | |
| return __pa(per_cpu_ptr(&posted_msi_pi_desc, cpu)); | |
| } | |
| static void intel_ir_reconfigure_irte_posted(struct irq_data *irqd) | |
| { | |
| struct intel_ir_data *ir_data = irqd->chip_data; | |
| struct irte *irte = &ir_data->irte_entry; | |
| struct irte irte_pi; | |
| u64 pid_addr; | |
| pid_addr = get_pi_desc_addr(irqd); | |
| if (!pid_addr) { | |
| pr_warn("Failed to setup IRQ %d for posted mode", irqd->irq); | |
| return; | |
| } | |
| memset(&irte_pi, 0, sizeof(irte_pi)); | |
| /* The shared IRTE already be set up as posted during alloc_irte */ | |
| dmar_copy_shared_irte(&irte_pi, irte); | |
| irte_pi.pda_l = (pid_addr >> (32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT); | |
| irte_pi.pda_h = (pid_addr >> 32) & ~(-1UL << PDA_HIGH_BIT); | |
| modify_irte(&ir_data->irq_2_iommu, &irte_pi); | |
| } | |
| #else | |
| static inline void intel_ir_reconfigure_irte_posted(struct irq_data *irqd) {} | |
| #endif | |
| static void __intel_ir_reconfigure_irte(struct irq_data *irqd, bool force_host) | |
| { | |
| struct intel_ir_data *ir_data = irqd->chip_data; | |
| /* | |
| * Don't modify IRTEs for IRQs that are being posted to vCPUs if the | |
| * host CPU affinity changes. | |
| */ | |
| if (ir_data->irq_2_iommu.posted_vcpu && !force_host) | |
| return; | |
| ir_data->irq_2_iommu.posted_vcpu = false; | |
| if (ir_data->irq_2_iommu.posted_msi) | |
| intel_ir_reconfigure_irte_posted(irqd); | |
| else | |
| modify_irte(&ir_data->irq_2_iommu, &ir_data->irte_entry); | |
| } | |
| static void intel_ir_reconfigure_irte(struct irq_data *irqd, bool force_host) | |
| { | |
| struct intel_ir_data *ir_data = irqd->chip_data; | |
| struct irte *irte = &ir_data->irte_entry; | |
| struct irq_cfg *cfg = irqd_cfg(irqd); | |
| /* | |
| * Atomically updates the IRTE with the new destination, vector | |
| * and flushes the interrupt entry cache. | |
| */ | |
| irte->vector = cfg->vector; | |
| irte->dest_id = IRTE_DEST(cfg->dest_apicid); | |
| __intel_ir_reconfigure_irte(irqd, force_host); | |
| } | |
| /* | |
| * Migrate the IO-APIC irq in the presence of intr-remapping. | |
| * | |
| * For both level and edge triggered, irq migration is a simple atomic | |
| * update(of vector and cpu destination) of IRTE and flush the hardware cache. | |
| * | |
| * For level triggered, we eliminate the io-apic RTE modification (with the | |
| * updated vector information), by using a virtual vector (io-apic pin number). | |
| * Real vector that is used for interrupting cpu will be coming from | |
| * the interrupt-remapping table entry. | |
| * | |
| * As the migration is a simple atomic update of IRTE, the same mechanism | |
| * is used to migrate MSI irq's in the presence of interrupt-remapping. | |
| */ | |
| static int | |
| intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask, | |
| bool force) | |
| { | |
| struct irq_data *parent = data->parent_data; | |
| struct irq_cfg *cfg = irqd_cfg(data); | |
| int ret; | |
| ret = parent->chip->irq_set_affinity(parent, mask, force); | |
| if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE) | |
| return ret; | |
| intel_ir_reconfigure_irte(data, false); | |
| /* | |
| * After this point, all the interrupts will start arriving | |
| * at the new destination. So, time to cleanup the previous | |
| * vector allocation. | |
| */ | |
| vector_schedule_cleanup(cfg); | |
| return IRQ_SET_MASK_OK_DONE; | |
| } | |
| static void intel_ir_compose_msi_msg(struct irq_data *irq_data, | |
| struct msi_msg *msg) | |
| { | |
| struct intel_ir_data *ir_data = irq_data->chip_data; | |
| *msg = ir_data->msi_entry; | |
| } | |
| static int intel_ir_set_vcpu_affinity(struct irq_data *data, void *info) | |
| { | |
| struct intel_ir_data *ir_data = data->chip_data; | |
| struct intel_iommu_pi_data *pi_data = info; | |
| /* stop posting interrupts, back to the default mode */ | |
| if (!pi_data) { | |
| __intel_ir_reconfigure_irte(data, true); | |
| } else { | |
| struct irte irte_pi; | |
| /* | |
| * We are not caching the posted interrupt entry. We | |
| * copy the data from the remapped entry and modify | |
| * the fields which are relevant for posted mode. The | |
| * cached remapped entry is used for switching back to | |
| * remapped mode. | |
| */ | |
| memset(&irte_pi, 0, sizeof(irte_pi)); | |
| dmar_copy_shared_irte(&irte_pi, &ir_data->irte_entry); | |
| /* Update the posted mode fields */ | |
| irte_pi.p_pst = 1; | |
| irte_pi.p_urgent = 0; | |
| irte_pi.p_vector = pi_data->vector; | |
| irte_pi.pda_l = (pi_data->pi_desc_addr >> | |
| (32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT); | |
| irte_pi.pda_h = (pi_data->pi_desc_addr >> 32) & | |
| ~(-1UL << PDA_HIGH_BIT); | |
| ir_data->irq_2_iommu.posted_vcpu = true; | |
| modify_irte(&ir_data->irq_2_iommu, &irte_pi); | |
| } | |
| return 0; | |
| } | |
| static struct irq_chip intel_ir_chip = { | |
| .name = "INTEL-IR", | |
| .irq_ack = apic_ack_irq, | |
| .irq_set_affinity = intel_ir_set_affinity, | |
| .irq_compose_msi_msg = intel_ir_compose_msi_msg, | |
| .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity, | |
| }; | |
| /* | |
| * With posted MSIs, the MSI vectors are multiplexed into a single notification | |
| * vector, and only the notification vector is sent to the APIC IRR. Device | |
| * MSIs are then dispatched in a demux loop that harvests the MSIs from the | |
| * CPU's Posted Interrupt Request bitmap. I.e. Posted MSIs never get sent to | |
| * the APIC IRR, and thus do not need an EOI. The notification handler instead | |
| * performs a single EOI after processing the PIR. | |
| * | |
| * Note! Pending SMP/CPU affinity changes, which are per MSI, must still be | |
| * honored, only the APIC EOI is omitted. | |
| * | |
| * For the example below, 3 MSIs are coalesced into one CPU notification. Only | |
| * one apic_eoi() is needed, but each MSI needs to process pending changes to | |
| * its CPU affinity. | |
| * | |
| * __sysvec_posted_msi_notification() | |
| * irq_enter(); | |
| * handle_edge_irq() | |
| * irq_chip_ack_parent() | |
| * intel_ack_posted_msi_irq(); // No EOI | |
| * handle_irq_event() | |
| * driver_handler() | |
| * handle_edge_irq() | |
| * irq_chip_ack_parent() | |
| * intel_ack_posted_msi_irq(); // No EOI | |
| * handle_irq_event() | |
| * driver_handler() | |
| * handle_edge_irq() | |
| * irq_chip_ack_parent() | |
| * intel_ack_posted_msi_irq(); // No EOI | |
| * handle_irq_event() | |
| * driver_handler() | |
| * apic_eoi() | |
| * irq_exit() | |
| * | |
| */ | |
| static struct irq_chip intel_ir_chip_post_msi = { | |
| .name = "INTEL-IR-POST", | |
| .irq_ack = intel_ack_posted_msi_irq, | |
| .irq_set_affinity = intel_ir_set_affinity, | |
| .irq_compose_msi_msg = intel_ir_compose_msi_msg, | |
| .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity, | |
| }; | |
| static void fill_msi_msg(struct msi_msg *msg, u32 index, u32 subhandle) | |
| { | |
| memset(msg, 0, sizeof(*msg)); | |
| msg->arch_addr_lo.dmar_base_address = X86_MSI_BASE_ADDRESS_LOW; | |
| msg->arch_addr_lo.dmar_subhandle_valid = true; | |
| msg->arch_addr_lo.dmar_format = true; | |
| msg->arch_addr_lo.dmar_index_0_14 = index & 0x7FFF; | |
| msg->arch_addr_lo.dmar_index_15 = !!(index & 0x8000); | |
| msg->address_hi = X86_MSI_BASE_ADDRESS_HIGH; | |
| msg->arch_data.dmar_subhandle = subhandle; | |
| } | |
| static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data, | |
| struct irq_cfg *irq_cfg, | |
| struct irq_alloc_info *info, | |
| int index, int sub_handle) | |
| { | |
| struct irte *irte = &data->irte_entry; | |
| prepare_irte(irte, irq_cfg->vector, irq_cfg->dest_apicid); | |
| switch (info->type) { | |
| case X86_IRQ_ALLOC_TYPE_IOAPIC: | |
| /* Set source-id of interrupt request */ | |
| set_ioapic_sid(irte, info->devid); | |
| apic_pr_verbose("IOAPIC[%d]: Set IRTE entry (P:%d FPD:%d Dst_Mode:%d Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X Avail:%X Vector:%02X Dest:%08X SID:%04X SQ:%X SVT:%X)\n", | |
| info->devid, irte->present, irte->fpd, irte->dst_mode, | |
| irte->redir_hint, irte->trigger_mode, irte->dlvry_mode, | |
| irte->avail, irte->vector, irte->dest_id, irte->sid, | |
| irte->sq, irte->svt); | |
| sub_handle = info->ioapic.pin; | |
| break; | |
| case X86_IRQ_ALLOC_TYPE_HPET: | |
| set_hpet_sid(irte, info->devid); | |
| break; | |
| case X86_IRQ_ALLOC_TYPE_PCI_MSI: | |
| case X86_IRQ_ALLOC_TYPE_PCI_MSIX: | |
| if (posted_msi_enabled()) { | |
| prepare_irte_posted(irte); | |
| data->irq_2_iommu.posted_msi = 1; | |
| } | |
| set_msi_sid(irte, | |
| pci_real_dma_dev(msi_desc_to_pci_dev(info->desc))); | |
| break; | |
| default: | |
| BUG_ON(1); | |
| break; | |
| } | |
| fill_msi_msg(&data->msi_entry, index, sub_handle); | |
| } | |
| static void intel_free_irq_resources(struct irq_domain *domain, | |
| unsigned int virq, unsigned int nr_irqs) | |
| { | |
| struct irq_data *irq_data; | |
| struct intel_ir_data *data; | |
| struct irq_2_iommu *irq_iommu; | |
| unsigned long flags; | |
| int i; | |
| for (i = 0; i < nr_irqs; i++) { | |
| irq_data = irq_domain_get_irq_data(domain, virq + i); | |
| if (irq_data && irq_data->chip_data) { | |
| data = irq_data->chip_data; | |
| irq_iommu = &data->irq_2_iommu; | |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); | |
| clear_entries(irq_iommu); | |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); | |
| irq_domain_reset_irq_data(irq_data); | |
| kfree(data); | |
| } | |
| } | |
| } | |
| static int intel_irq_remapping_alloc(struct irq_domain *domain, | |
| unsigned int virq, unsigned int nr_irqs, | |
| void *arg) | |
| { | |
| struct intel_iommu *iommu = domain->host_data; | |
| struct irq_alloc_info *info = arg; | |
| struct intel_ir_data *data, *ird; | |
| struct irq_data *irq_data; | |
| struct irq_cfg *irq_cfg; | |
| int i, ret, index; | |
| if (!info || !iommu) | |
| return -EINVAL; | |
| if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_PCI_MSI) | |
| return -EINVAL; | |
| ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg); | |
| if (ret < 0) | |
| return ret; | |
| ret = -ENOMEM; | |
| data = kzalloc_obj(*data); | |
| if (!data) | |
| goto out_free_parent; | |
| index = alloc_irte(iommu, &data->irq_2_iommu, nr_irqs); | |
| if (index < 0) { | |
| pr_warn("Failed to allocate IRTE\n"); | |
| kfree(data); | |
| goto out_free_parent; | |
| } | |
| for (i = 0; i < nr_irqs; i++) { | |
| irq_data = irq_domain_get_irq_data(domain, virq + i); | |
| irq_cfg = irqd_cfg(irq_data); | |
| if (!irq_data || !irq_cfg) { | |
| if (!i) | |
| kfree(data); | |
| ret = -EINVAL; | |
| goto out_free_data; | |
| } | |
| if (i > 0) { | |
| ird = kzalloc_obj(*ird); | |
| if (!ird) | |
| goto out_free_data; | |
| /* Initialize the common data */ | |
| ird->irq_2_iommu = data->irq_2_iommu; | |
| ird->irq_2_iommu.sub_handle = i; | |
| } else { | |
| ird = data; | |
| } | |
| irq_data->hwirq = (index << 16) + i; | |
| irq_data->chip_data = ird; | |
| if (posted_msi_enabled() && | |
| ((info->type == X86_IRQ_ALLOC_TYPE_PCI_MSI) || | |
| (info->type == X86_IRQ_ALLOC_TYPE_PCI_MSIX))) | |
| irq_data->chip = &intel_ir_chip_post_msi; | |
| else | |
| irq_data->chip = &intel_ir_chip; | |
| intel_irq_remapping_prepare_irte(ird, irq_cfg, info, index, i); | |
| } | |
| return 0; | |
| out_free_data: | |
| intel_free_irq_resources(domain, virq, i); | |
| out_free_parent: | |
| irq_domain_free_irqs_common(domain, virq, nr_irqs); | |
| return ret; | |
| } | |
| static void intel_irq_remapping_free(struct irq_domain *domain, | |
| unsigned int virq, unsigned int nr_irqs) | |
| { | |
| intel_free_irq_resources(domain, virq, nr_irqs); | |
| irq_domain_free_irqs_common(domain, virq, nr_irqs); | |
| } | |
| static int intel_irq_remapping_activate(struct irq_domain *domain, | |
| struct irq_data *irq_data, bool reserve) | |
| { | |
| intel_ir_reconfigure_irte(irq_data, true); | |
| return 0; | |
| } | |
| static void intel_irq_remapping_deactivate(struct irq_domain *domain, | |
| struct irq_data *irq_data) | |
| { | |
| struct intel_ir_data *data = irq_data->chip_data; | |
| struct irte entry; | |
| WARN_ON_ONCE(data->irq_2_iommu.posted_vcpu); | |
| data->irq_2_iommu.posted_vcpu = false; | |
| memset(&entry, 0, sizeof(entry)); | |
| modify_irte(&data->irq_2_iommu, &entry); | |
| } | |
| static int intel_irq_remapping_select(struct irq_domain *d, | |
| struct irq_fwspec *fwspec, | |
| enum irq_domain_bus_token bus_token) | |
| { | |
| struct intel_iommu *iommu = NULL; | |
| if (x86_fwspec_is_ioapic(fwspec)) | |
| iommu = map_ioapic_to_iommu(fwspec->param[0]); | |
| else if (x86_fwspec_is_hpet(fwspec)) | |
| iommu = map_hpet_to_iommu(fwspec->param[0]); | |
| return iommu && d == iommu->ir_domain; | |
| } | |
| static const struct irq_domain_ops intel_ir_domain_ops = { | |
| .select = intel_irq_remapping_select, | |
| .alloc = intel_irq_remapping_alloc, | |
| .free = intel_irq_remapping_free, | |
| .activate = intel_irq_remapping_activate, | |
| .deactivate = intel_irq_remapping_deactivate, | |
| }; | |
| static const struct msi_parent_ops dmar_msi_parent_ops = { | |
| .supported_flags = X86_VECTOR_MSI_FLAGS_SUPPORTED | MSI_FLAG_MULTI_PCI_MSI, | |
| .bus_select_token = DOMAIN_BUS_DMAR, | |
| .bus_select_mask = MATCH_PCI_MSI, | |
| .prefix = "IR-", | |
| .init_dev_msi_info = msi_parent_init_dev_msi_info, | |
| }; | |
| /* | |
| * Support of Interrupt Remapping Unit Hotplug | |
| */ | |
| static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu) | |
| { | |
| int ret; | |
| int eim = x2apic_enabled(); | |
| if (eim && !ecap_eim_support(iommu->ecap)) { | |
| pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n", | |
| iommu->reg_phys, iommu->ecap); | |
| return -ENODEV; | |
| } | |
| if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) { | |
| pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n", | |
| iommu->reg_phys); | |
| return -ENODEV; | |
| } | |
| /* TODO: check all IOAPICs are covered by IOMMU */ | |
| /* Setup Interrupt-remapping now. */ | |
| ret = intel_setup_irq_remapping(iommu); | |
| if (ret) { | |
| pr_err("Failed to setup irq remapping for %s\n", | |
| iommu->name); | |
| intel_teardown_irq_remapping(iommu); | |
| ir_remove_ioapic_hpet_scope(iommu); | |
| } else { | |
| iommu_enable_irq_remapping(iommu); | |
| } | |
| return ret; | |
| } | |
| int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert) | |
| { | |
| int ret = 0; | |
| struct intel_iommu *iommu = dmaru->iommu; | |
| if (!irq_remapping_enabled) | |
| return 0; | |
| if (iommu == NULL) | |
| return -EINVAL; | |
| if (!ecap_ir_support(iommu->ecap)) | |
| return 0; | |
| if (irq_remapping_cap(IRQ_POSTING_CAP) && | |
| !cap_pi_support(iommu->cap)) | |
| return -EBUSY; | |
| if (insert) { | |
| if (!iommu->ir_table) | |
| ret = dmar_ir_add(dmaru, iommu); | |
| } else { | |
| if (iommu->ir_table) { | |
| if (!bitmap_empty(iommu->ir_table->bitmap, | |
| INTR_REMAP_TABLE_ENTRIES)) { | |
| ret = -EBUSY; | |
| } else { | |
| iommu_disable_irq_remapping(iommu); | |
| intel_teardown_irq_remapping(iommu); | |
| ir_remove_ioapic_hpet_scope(iommu); | |
| } | |
| } | |
| } | |
| return ret; | |
| } |