| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Himax HX852x(ES) Touchscreen Driver | |
| * Copyright (c) 2020-2024 Stephan Gerhold <stephan@gerhold.net> | |
| * Copyright (c) 2020 Jonathan Albrieux <jonathan.albrieux@gmail.com> | |
| * | |
| * Based on the Himax Android Driver Sample Code Ver 0.3 for HMX852xES chipset: | |
| * Copyright (c) 2014 Himax Corporation. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/input.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/input/touchscreen.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/unaligned.h> | |
| #define HX852X_COORD_SIZE(fingers) ((fingers) * sizeof(struct hx852x_coord)) | |
| #define HX852X_WIDTH_SIZE(fingers) ALIGN(fingers, 4) | |
| #define HX852X_BUF_SIZE(fingers) (HX852X_COORD_SIZE(fingers) + \ | |
| HX852X_WIDTH_SIZE(fingers) + \ | |
| sizeof(struct hx852x_touch_info)) | |
| #define HX852X_MAX_FINGERS 12 | |
| #define HX852X_MAX_KEY_COUNT 4 | |
| #define HX852X_MAX_BUF_SIZE HX852X_BUF_SIZE(HX852X_MAX_FINGERS) | |
| #define HX852X_TS_SLEEP_IN 0x80 | |
| #define HX852X_TS_SLEEP_OUT 0x81 | |
| #define HX852X_TS_SENSE_OFF 0x82 | |
| #define HX852X_TS_SENSE_ON 0x83 | |
| #define HX852X_READ_ONE_EVENT 0x85 | |
| #define HX852X_READ_ALL_EVENTS 0x86 | |
| #define HX852X_READ_LATEST_EVENT 0x87 | |
| #define HX852X_CLEAR_EVENT_STACK 0x88 | |
| #define HX852X_REG_SRAM_SWITCH 0x8c | |
| #define HX852X_REG_SRAM_ADDR 0x8b | |
| #define HX852X_REG_FLASH_RPLACE 0x5a | |
| #define HX852X_SRAM_SWITCH_TEST_MODE 0x14 | |
| #define HX852X_SRAM_ADDR_CONFIG 0x7000 | |
| struct hx852x { | |
| struct i2c_client *client; | |
| struct input_dev *input_dev; | |
| struct touchscreen_properties props; | |
| struct gpio_desc *reset_gpiod; | |
| struct regulator_bulk_data supplies[2]; | |
| unsigned int max_fingers; | |
| unsigned int keycount; | |
| unsigned int keycodes[HX852X_MAX_KEY_COUNT]; | |
| }; | |
| struct hx852x_config { | |
| u8 rx_num; | |
| u8 tx_num; | |
| u8 max_pt; | |
| u8 padding1[3]; | |
| __be16 x_res; | |
| __be16 y_res; | |
| u8 padding2[2]; | |
| } __packed __aligned(4); | |
| struct hx852x_coord { | |
| __be16 x; | |
| __be16 y; | |
| } __packed __aligned(4); | |
| struct hx852x_touch_info { | |
| u8 finger_num; | |
| __le16 finger_pressed; | |
| u8 padding; | |
| } __packed __aligned(4); | |
| static int hx852x_i2c_read(struct hx852x *hx, u8 cmd, void *data, u16 len) | |
| { | |
| struct i2c_client *client = hx->client; | |
| int error; | |
| int ret; | |
| struct i2c_msg msg[] = { | |
| { | |
| .addr = client->addr, | |
| .flags = 0, | |
| .len = 1, | |
| .buf = &cmd, | |
| }, | |
| { | |
| .addr = client->addr, | |
| .flags = I2C_M_RD, | |
| .len = len, | |
| .buf = data, | |
| }, | |
| }; | |
| ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); | |
| if (ret != ARRAY_SIZE(msg)) { | |
| error = ret < 0 ? ret : -EIO; | |
| dev_err(&client->dev, "failed to read %#x: %d\n", cmd, error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int hx852x_power_on(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| int error; | |
| error = regulator_bulk_enable(ARRAY_SIZE(hx->supplies), hx->supplies); | |
| if (error) { | |
| dev_err(dev, "failed to enable regulators: %d\n", error); | |
| return error; | |
| } | |
| gpiod_set_value_cansleep(hx->reset_gpiod, 1); | |
| msleep(20); | |
| gpiod_set_value_cansleep(hx->reset_gpiod, 0); | |
| msleep(50); | |
| return 0; | |
| } | |
| static int hx852x_start(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| int error; | |
| error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_OUT); | |
| if (error) { | |
| dev_err(dev, "failed to send TS_SLEEP_OUT: %d\n", error); | |
| return error; | |
| } | |
| msleep(30); | |
| error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_ON); | |
| if (error) { | |
| dev_err(dev, "failed to send TS_SENSE_ON: %d\n", error); | |
| return error; | |
| } | |
| msleep(20); | |
| return 0; | |
| } | |
| static int hx852x_stop(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| int error; | |
| error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_OFF); | |
| if (error) { | |
| dev_err(dev, "failed to send TS_SENSE_OFF: %d\n", error); | |
| return error; | |
| } | |
| msleep(20); | |
| error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_IN); | |
| if (error) { | |
| dev_err(dev, "failed to send TS_SLEEP_IN: %d\n", error); | |
| return error; | |
| } | |
| msleep(30); | |
| return 0; | |
| } | |
| static int hx852x_power_off(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| int error; | |
| error = regulator_bulk_disable(ARRAY_SIZE(hx->supplies), hx->supplies); | |
| if (error) { | |
| dev_err(dev, "failed to disable regulators: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int hx852x_read_config(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| struct hx852x_config conf; | |
| int x_res, y_res; | |
| int error, error2; | |
| error = hx852x_power_on(hx); | |
| if (error) | |
| return error; | |
| /* Sensing must be turned on briefly to load the config */ | |
| error = hx852x_start(hx); | |
| if (error) | |
| goto err_power_off; | |
| error = hx852x_stop(hx); | |
| if (error) | |
| goto err_power_off; | |
| error = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH, | |
| HX852X_SRAM_SWITCH_TEST_MODE); | |
| if (error) | |
| goto err_power_off; | |
| error = i2c_smbus_write_word_data(hx->client, HX852X_REG_SRAM_ADDR, | |
| HX852X_SRAM_ADDR_CONFIG); | |
| if (error) | |
| goto err_test_mode; | |
| error = hx852x_i2c_read(hx, HX852X_REG_FLASH_RPLACE, &conf, sizeof(conf)); | |
| if (error) | |
| goto err_test_mode; | |
| x_res = be16_to_cpu(conf.x_res); | |
| y_res = be16_to_cpu(conf.y_res); | |
| hx->max_fingers = (conf.max_pt & 0xf0) >> 4; | |
| dev_dbg(dev, "x res: %u, y res: %u, max fingers: %u\n", | |
| x_res, y_res, hx->max_fingers); | |
| if (hx->max_fingers > HX852X_MAX_FINGERS) { | |
| dev_err(dev, "max supported fingers: %u, found: %u\n", | |
| HX852X_MAX_FINGERS, hx->max_fingers); | |
| error = -EINVAL; | |
| goto err_test_mode; | |
| } | |
| if (x_res && y_res) { | |
| input_set_abs_params(hx->input_dev, ABS_MT_POSITION_X, 0, x_res - 1, 0, 0); | |
| input_set_abs_params(hx->input_dev, ABS_MT_POSITION_Y, 0, y_res - 1, 0, 0); | |
| } | |
| err_test_mode: | |
| error2 = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH, 0); | |
| error = error ?: error2; | |
| err_power_off: | |
| error2 = hx852x_power_off(hx); | |
| return error ?: error2; | |
| } | |
| static int hx852x_handle_events(struct hx852x *hx) | |
| { | |
| /* | |
| * The event packets have variable size, depending on the amount of | |
| * supported fingers (hx->max_fingers). They are laid out as follows: | |
| * - struct hx852x_coord[hx->max_fingers]: Coordinates for each finger | |
| * - u8[ALIGN(hx->max_fingers, 4)]: Touch width for each finger | |
| * with padding for 32-bit alignment | |
| * - struct hx852x_touch_info | |
| * | |
| * Load everything into a 32-bit aligned buffer so the coordinates | |
| * can be assigned directly, without using get_unaligned_*(). | |
| */ | |
| u8 buf[HX852X_MAX_BUF_SIZE] __aligned(4); | |
| struct hx852x_coord *coord = (struct hx852x_coord *)buf; | |
| u8 *width = &buf[HX852X_COORD_SIZE(hx->max_fingers)]; | |
| struct hx852x_touch_info *info = (struct hx852x_touch_info *) | |
| &width[HX852X_WIDTH_SIZE(hx->max_fingers)]; | |
| unsigned long finger_pressed, key_pressed; | |
| unsigned int i, x, y, w; | |
| int error; | |
| error = hx852x_i2c_read(hx, HX852X_READ_ALL_EVENTS, buf, | |
| HX852X_BUF_SIZE(hx->max_fingers)); | |
| if (error) | |
| return error; | |
| finger_pressed = get_unaligned_le16(&info->finger_pressed); | |
| key_pressed = finger_pressed >> HX852X_MAX_FINGERS; | |
| /* All bits are set when no touch is detected */ | |
| if (info->finger_num == 0xff || !(info->finger_num & 0x0f)) | |
| finger_pressed = 0; | |
| if (key_pressed == 0xf) | |
| key_pressed = 0; | |
| for_each_set_bit(i, &finger_pressed, hx->max_fingers) { | |
| x = be16_to_cpu(coord[i].x); | |
| y = be16_to_cpu(coord[i].y); | |
| w = width[i]; | |
| input_mt_slot(hx->input_dev, i); | |
| input_mt_report_slot_state(hx->input_dev, MT_TOOL_FINGER, 1); | |
| touchscreen_report_pos(hx->input_dev, &hx->props, x, y, true); | |
| input_report_abs(hx->input_dev, ABS_MT_TOUCH_MAJOR, w); | |
| } | |
| input_mt_sync_frame(hx->input_dev); | |
| for (i = 0; i < hx->keycount; i++) | |
| input_report_key(hx->input_dev, hx->keycodes[i], key_pressed & BIT(i)); | |
| input_sync(hx->input_dev); | |
| return 0; | |
| } | |
| static irqreturn_t hx852x_interrupt(int irq, void *ptr) | |
| { | |
| struct hx852x *hx = ptr; | |
| int error; | |
| error = hx852x_handle_events(hx); | |
| if (error) { | |
| dev_err_ratelimited(&hx->client->dev, | |
| "failed to handle events: %d\n", error); | |
| return IRQ_NONE; | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int hx852x_input_open(struct input_dev *dev) | |
| { | |
| struct hx852x *hx = input_get_drvdata(dev); | |
| int error; | |
| error = hx852x_power_on(hx); | |
| if (error) | |
| return error; | |
| error = hx852x_start(hx); | |
| if (error) { | |
| hx852x_power_off(hx); | |
| return error; | |
| } | |
| enable_irq(hx->client->irq); | |
| return 0; | |
| } | |
| static void hx852x_input_close(struct input_dev *dev) | |
| { | |
| struct hx852x *hx = input_get_drvdata(dev); | |
| hx852x_stop(hx); | |
| disable_irq(hx->client->irq); | |
| hx852x_power_off(hx); | |
| } | |
| static int hx852x_parse_properties(struct hx852x *hx) | |
| { | |
| struct device *dev = &hx->client->dev; | |
| int error, count; | |
| count = device_property_count_u32(dev, "linux,keycodes"); | |
| if (count == -EINVAL) { | |
| /* Property does not exist, keycodes are optional */ | |
| return 0; | |
| } else if (count < 0) { | |
| dev_err(dev, "Failed to read linux,keycodes: %d\n", count); | |
| return count; | |
| } else if (count > HX852X_MAX_KEY_COUNT) { | |
| dev_err(dev, "max supported keys: %u, found: %u\n", | |
| HX852X_MAX_KEY_COUNT, hx->keycount); | |
| return -EINVAL; | |
| } | |
| hx->keycount = count; | |
| error = device_property_read_u32_array(dev, "linux,keycodes", | |
| hx->keycodes, hx->keycount); | |
| if (error) { | |
| dev_err(dev, "failed to read linux,keycodes: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int hx852x_probe(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| struct hx852x *hx; | |
| int error, i; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | | |
| I2C_FUNC_SMBUS_WRITE_BYTE | | |
| I2C_FUNC_SMBUS_WRITE_BYTE_DATA | | |
| I2C_FUNC_SMBUS_WRITE_WORD_DATA)) { | |
| dev_err(dev, "not all required i2c functionality supported\n"); | |
| return -ENXIO; | |
| } | |
| hx = devm_kzalloc(dev, sizeof(*hx), GFP_KERNEL); | |
| if (!hx) | |
| return -ENOMEM; | |
| hx->client = client; | |
| hx->input_dev = devm_input_allocate_device(dev); | |
| if (!hx->input_dev) | |
| return -ENOMEM; | |
| hx->input_dev->name = "Himax HX852x"; | |
| hx->input_dev->id.bustype = BUS_I2C; | |
| hx->input_dev->open = hx852x_input_open; | |
| hx->input_dev->close = hx852x_input_close; | |
| i2c_set_clientdata(client, hx); | |
| input_set_drvdata(hx->input_dev, hx); | |
| hx->supplies[0].supply = "vcca"; | |
| hx->supplies[1].supply = "vccd"; | |
| error = devm_regulator_bulk_get(dev, ARRAY_SIZE(hx->supplies), hx->supplies); | |
| if (error) | |
| return dev_err_probe(dev, error, "failed to get regulators\n"); | |
| hx->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); | |
| if (IS_ERR(hx->reset_gpiod)) | |
| return dev_err_probe(dev, PTR_ERR(hx->reset_gpiod), | |
| "failed to get reset gpio\n"); | |
| error = devm_request_threaded_irq(dev, client->irq, NULL, hx852x_interrupt, | |
| IRQF_ONESHOT | IRQF_NO_AUTOEN, NULL, hx); | |
| if (error) | |
| return dev_err_probe(dev, error, "failed to request irq %d", client->irq); | |
| error = hx852x_read_config(hx); | |
| if (error) | |
| return error; | |
| input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_X); | |
| input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_Y); | |
| input_set_abs_params(hx->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); | |
| touchscreen_parse_properties(hx->input_dev, true, &hx->props); | |
| error = hx852x_parse_properties(hx); | |
| if (error) | |
| return error; | |
| hx->input_dev->keycode = hx->keycodes; | |
| hx->input_dev->keycodemax = hx->keycount; | |
| hx->input_dev->keycodesize = sizeof(hx->keycodes[0]); | |
| for (i = 0; i < hx->keycount; i++) | |
| input_set_capability(hx->input_dev, EV_KEY, hx->keycodes[i]); | |
| error = input_mt_init_slots(hx->input_dev, hx->max_fingers, | |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); | |
| if (error) | |
| return dev_err_probe(dev, error, "failed to init MT slots\n"); | |
| error = input_register_device(hx->input_dev); | |
| if (error) | |
| return dev_err_probe(dev, error, "failed to register input device\n"); | |
| return 0; | |
| } | |
| static int hx852x_suspend(struct device *dev) | |
| { | |
| struct hx852x *hx = dev_get_drvdata(dev); | |
| guard(mutex)(&hx->input_dev->mutex); | |
| if (input_device_enabled(hx->input_dev)) | |
| return hx852x_stop(hx); | |
| return 0; | |
| } | |
| static int hx852x_resume(struct device *dev) | |
| { | |
| struct hx852x *hx = dev_get_drvdata(dev); | |
| guard(mutex)(&hx->input_dev->mutex); | |
| if (input_device_enabled(hx->input_dev)) | |
| return hx852x_start(hx); | |
| return 0; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(hx852x_pm_ops, hx852x_suspend, hx852x_resume); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id hx852x_of_match[] = { | |
| { .compatible = "himax,hx852es" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, hx852x_of_match); | |
| #endif | |
| static struct i2c_driver hx852x_driver = { | |
| .probe = hx852x_probe, | |
| .driver = { | |
| .name = "himax_hx852x", | |
| .pm = pm_sleep_ptr(&hx852x_pm_ops), | |
| .of_match_table = of_match_ptr(hx852x_of_match), | |
| }, | |
| }; | |
| module_i2c_driver(hx852x_driver); | |
| MODULE_DESCRIPTION("Himax HX852x(ES) Touchscreen Driver"); | |
| MODULE_AUTHOR("Jonathan Albrieux <jonathan.albrieux@gmail.com>"); | |
| MODULE_AUTHOR("Stephan Gerhold <stephan@gerhold.net>"); | |
| MODULE_LICENSE("GPL"); |