| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * OMAP4 Keypad Driver | |
| * | |
| * Copyright (C) 2010 Texas Instruments | |
| * | |
| * Author: Abraham Arce <x0066660@ti.com> | |
| * Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/errno.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <linux/input.h> | |
| #include <linux/input/matrix_keypad.h> | |
| #include <linux/slab.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/pm_wakeirq.h> | |
| /* OMAP4 registers */ | |
| #define OMAP4_KBD_REVISION 0x00 | |
| #define OMAP4_KBD_SYSCONFIG 0x10 | |
| #define OMAP4_KBD_SYSSTATUS 0x14 | |
| #define OMAP4_KBD_IRQSTATUS 0x18 | |
| #define OMAP4_KBD_IRQENABLE 0x1C | |
| #define OMAP4_KBD_WAKEUPENABLE 0x20 | |
| #define OMAP4_KBD_PENDING 0x24 | |
| #define OMAP4_KBD_CTRL 0x28 | |
| #define OMAP4_KBD_DEBOUNCINGTIME 0x2C | |
| #define OMAP4_KBD_LONGKEYTIME 0x30 | |
| #define OMAP4_KBD_TIMEOUT 0x34 | |
| #define OMAP4_KBD_STATEMACHINE 0x38 | |
| #define OMAP4_KBD_ROWINPUTS 0x3C | |
| #define OMAP4_KBD_COLUMNOUTPUTS 0x40 | |
| #define OMAP4_KBD_FULLCODE31_0 0x44 | |
| #define OMAP4_KBD_FULLCODE63_32 0x48 | |
| /* OMAP4 bit definitions */ | |
| #define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0) | |
| #define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1) | |
| #define OMAP4_DEF_WUP_EVENT_ENA BIT(0) | |
| #define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1) | |
| #define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1) | |
| #define OMAP4_DEF_CTRL_PTV_SHIFT 2 | |
| /* OMAP4 values */ | |
| #define OMAP4_VAL_IRQDISABLE 0x0 | |
| /* | |
| * Errata i689: If a key is released for a time shorter than debounce time, | |
| * the keyboard will idle and never detect the key release. The workaround | |
| * is to use at least a 12ms debounce time. See omap5432 TRM chapter | |
| * "26.4.6.2 Keyboard Controller Timer" for more information. | |
| */ | |
| #define OMAP4_KEYPAD_PTV_DIV_128 0x6 | |
| #define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \ | |
| ((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1) | |
| #define OMAP4_VAL_DEBOUNCINGTIME_16MS \ | |
| OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128) | |
| #define OMAP4_KEYPAD_AUTOIDLE_MS 50 /* Approximate measured time */ | |
| #define OMAP4_KEYPAD_IDLE_CHECK_MS (OMAP4_KEYPAD_AUTOIDLE_MS / 2) | |
| enum { | |
| KBD_REVISION_OMAP4 = 0, | |
| KBD_REVISION_OMAP5, | |
| }; | |
| struct omap4_keypad { | |
| struct input_dev *input; | |
| void __iomem *base; | |
| unsigned int irq; | |
| struct mutex lock; /* for key scan */ | |
| unsigned int rows; | |
| unsigned int cols; | |
| u32 reg_offset; | |
| u32 irqreg_offset; | |
| unsigned int row_shift; | |
| bool no_autorepeat; | |
| u64 keys; | |
| unsigned short *keymap; | |
| struct clk *fck; | |
| }; | |
| static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) | |
| { | |
| return __raw_readl(keypad_data->base + | |
| keypad_data->reg_offset + offset); | |
| } | |
| static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) | |
| { | |
| __raw_writel(value, | |
| keypad_data->base + keypad_data->reg_offset + offset); | |
| } | |
| static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) | |
| { | |
| return __raw_readl(keypad_data->base + | |
| keypad_data->irqreg_offset + offset); | |
| } | |
| static void kbd_write_irqreg(struct omap4_keypad *keypad_data, | |
| u32 offset, u32 value) | |
| { | |
| __raw_writel(value, | |
| keypad_data->base + keypad_data->irqreg_offset + offset); | |
| } | |
| static int omap4_keypad_report_keys(struct omap4_keypad *keypad_data, | |
| u64 keys, bool down) | |
| { | |
| struct input_dev *input_dev = keypad_data->input; | |
| unsigned int col, row, code; | |
| DECLARE_BITMAP(mask, 64); | |
| unsigned long bit; | |
| int events = 0; | |
| bitmap_from_u64(mask, keys); | |
| for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) { | |
| row = bit / BITS_PER_BYTE; | |
| col = bit % BITS_PER_BYTE; | |
| code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); | |
| input_event(input_dev, EV_MSC, MSC_SCAN, code); | |
| input_report_key(input_dev, keypad_data->keymap[code], down); | |
| events++; | |
| } | |
| if (events) | |
| input_sync(input_dev); | |
| return events; | |
| } | |
| static void omap4_keypad_scan_keys(struct omap4_keypad *keypad_data, u64 keys) | |
| { | |
| u64 changed; | |
| guard(mutex)(&keypad_data->lock); | |
| changed = keys ^ keypad_data->keys; | |
| /* | |
| * Report key up events separately and first. This matters in case we | |
| * lost key-up interrupt and just now catching up. | |
| */ | |
| omap4_keypad_report_keys(keypad_data, changed & ~keys, false); | |
| /* Report key down events */ | |
| omap4_keypad_report_keys(keypad_data, changed & keys, true); | |
| keypad_data->keys = keys; | |
| } | |
| /* Interrupt handlers */ | |
| static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) | |
| { | |
| struct omap4_keypad *keypad_data = dev_id; | |
| if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) | |
| return IRQ_WAKE_THREAD; | |
| return IRQ_NONE; | |
| } | |
| static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) | |
| { | |
| struct omap4_keypad *keypad_data = dev_id; | |
| struct device *dev = keypad_data->input->dev.parent; | |
| u32 low, high; | |
| int error; | |
| u64 keys; | |
| error = pm_runtime_resume_and_get(dev); | |
| if (error) | |
| return IRQ_NONE; | |
| low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); | |
| high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); | |
| keys = low | (u64)high << 32; | |
| omap4_keypad_scan_keys(keypad_data, keys); | |
| /* clear pending interrupts */ | |
| kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, | |
| kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); | |
| pm_runtime_put_autosuspend(dev); | |
| return IRQ_HANDLED; | |
| } | |
| static int omap4_keypad_open(struct input_dev *input) | |
| { | |
| struct omap4_keypad *keypad_data = input_get_drvdata(input); | |
| struct device *dev = input->dev.parent; | |
| int error; | |
| error = pm_runtime_resume_and_get(dev); | |
| if (error) | |
| return error; | |
| error = clk_prepare_enable(keypad_data->fck); | |
| if (error) | |
| goto out; | |
| disable_irq(keypad_data->irq); | |
| kbd_writel(keypad_data, OMAP4_KBD_CTRL, | |
| OMAP4_DEF_CTRL_NOSOFTMODE | | |
| (OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT)); | |
| kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, | |
| OMAP4_VAL_DEBOUNCINGTIME_16MS); | |
| /* clear pending interrupts */ | |
| kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, | |
| kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); | |
| kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, | |
| OMAP4_DEF_IRQENABLE_EVENTEN); | |
| kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, | |
| OMAP4_DEF_WUP_EVENT_ENA); | |
| enable_irq(keypad_data->irq); | |
| out: | |
| pm_runtime_put_autosuspend(dev); | |
| return error; | |
| } | |
| static void omap4_keypad_stop(struct omap4_keypad *keypad_data) | |
| { | |
| /* Disable interrupts and wake-up events */ | |
| kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, | |
| OMAP4_VAL_IRQDISABLE); | |
| kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0); | |
| /* clear pending interrupts */ | |
| kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, | |
| kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); | |
| } | |
| static void omap4_keypad_close(struct input_dev *input) | |
| { | |
| struct omap4_keypad *keypad_data = input_get_drvdata(input); | |
| struct device *dev = input->dev.parent; | |
| int error; | |
| error = pm_runtime_resume_and_get(dev); | |
| if (error) | |
| dev_err(dev, "%s: pm_runtime_resume_and_get() failed: %d\n", | |
| __func__, error); | |
| disable_irq(keypad_data->irq); | |
| omap4_keypad_stop(keypad_data); | |
| enable_irq(keypad_data->irq); | |
| clk_disable_unprepare(keypad_data->fck); | |
| pm_runtime_put_autosuspend(dev); | |
| } | |
| static int omap4_keypad_parse_dt(struct device *dev, | |
| struct omap4_keypad *keypad_data) | |
| { | |
| struct device_node *np = dev->of_node; | |
| int err; | |
| err = matrix_keypad_parse_properties(dev, &keypad_data->rows, | |
| &keypad_data->cols); | |
| if (err) | |
| return err; | |
| keypad_data->no_autorepeat = of_property_read_bool(np, "linux,input-no-autorepeat"); | |
| return 0; | |
| } | |
| static int omap4_keypad_check_revision(struct device *dev, | |
| struct omap4_keypad *keypad_data) | |
| { | |
| unsigned int rev; | |
| rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); | |
| rev &= 0x03 << 30; | |
| rev >>= 30; | |
| switch (rev) { | |
| case KBD_REVISION_OMAP4: | |
| keypad_data->reg_offset = 0x00; | |
| keypad_data->irqreg_offset = 0x00; | |
| break; | |
| case KBD_REVISION_OMAP5: | |
| keypad_data->reg_offset = 0x10; | |
| keypad_data->irqreg_offset = 0x0c; | |
| break; | |
| default: | |
| dev_err(dev, "Keypad reports unsupported revision %d", rev); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Errata ID i689 "1.32 Keyboard Key Up Event Can Be Missed". | |
| * Interrupt may not happen for key-up events. We must clear stuck | |
| * key-up events after the keyboard hardware has auto-idled. | |
| */ | |
| static int omap4_keypad_runtime_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); | |
| u32 active; | |
| active = kbd_readl(keypad_data, OMAP4_KBD_STATEMACHINE); | |
| if (active) { | |
| pm_runtime_mark_last_busy(dev); | |
| return -EBUSY; | |
| } | |
| omap4_keypad_scan_keys(keypad_data, 0); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops omap4_keypad_pm_ops = { | |
| RUNTIME_PM_OPS(omap4_keypad_runtime_suspend, NULL, NULL) | |
| }; | |
| static void omap4_disable_pm(void *d) | |
| { | |
| pm_runtime_dont_use_autosuspend(d); | |
| pm_runtime_disable(d); | |
| } | |
| static int omap4_keypad_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct omap4_keypad *keypad_data; | |
| struct input_dev *input_dev; | |
| unsigned int max_keys; | |
| int irq; | |
| int error; | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) | |
| return irq; | |
| keypad_data = devm_kzalloc(dev, sizeof(*keypad_data), GFP_KERNEL); | |
| if (!keypad_data) { | |
| dev_err(dev, "keypad_data memory allocation failed\n"); | |
| return -ENOMEM; | |
| } | |
| keypad_data->irq = irq; | |
| keypad_data->fck = devm_clk_get(&pdev->dev, "fck"); | |
| if (IS_ERR(keypad_data->fck)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(keypad_data->fck), | |
| "unable to get fck"); | |
| mutex_init(&keypad_data->lock); | |
| platform_set_drvdata(pdev, keypad_data); | |
| error = omap4_keypad_parse_dt(dev, keypad_data); | |
| if (error) | |
| return error; | |
| keypad_data->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(keypad_data->base)) | |
| return PTR_ERR(keypad_data->base); | |
| pm_runtime_use_autosuspend(dev); | |
| pm_runtime_set_autosuspend_delay(dev, OMAP4_KEYPAD_IDLE_CHECK_MS); | |
| pm_runtime_enable(dev); | |
| error = devm_add_action_or_reset(dev, omap4_disable_pm, dev); | |
| if (error) { | |
| dev_err(dev, "unable to register cleanup action\n"); | |
| return error; | |
| } | |
| /* | |
| * Enable clocks for the keypad module so that we can read | |
| * revision register. | |
| */ | |
| error = pm_runtime_resume_and_get(dev); | |
| if (error) { | |
| dev_err(dev, "pm_runtime_resume_and_get() failed\n"); | |
| return error; | |
| } | |
| error = omap4_keypad_check_revision(dev, keypad_data); | |
| if (!error) { | |
| /* Ensure device does not raise interrupts */ | |
| omap4_keypad_stop(keypad_data); | |
| } | |
| pm_runtime_put_autosuspend(dev); | |
| if (error) | |
| return error; | |
| /* input device allocation */ | |
| keypad_data->input = input_dev = devm_input_allocate_device(dev); | |
| if (!input_dev) | |
| return -ENOMEM; | |
| input_dev->name = pdev->name; | |
| input_dev->id.bustype = BUS_HOST; | |
| input_dev->id.vendor = 0x0001; | |
| input_dev->id.product = 0x0001; | |
| input_dev->id.version = 0x0001; | |
| input_dev->open = omap4_keypad_open; | |
| input_dev->close = omap4_keypad_close; | |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); | |
| if (!keypad_data->no_autorepeat) | |
| __set_bit(EV_REP, input_dev->evbit); | |
| input_set_drvdata(input_dev, keypad_data); | |
| keypad_data->row_shift = get_count_order(keypad_data->cols); | |
| max_keys = keypad_data->rows << keypad_data->row_shift; | |
| keypad_data->keymap = devm_kcalloc(dev, | |
| max_keys, | |
| sizeof(keypad_data->keymap[0]), | |
| GFP_KERNEL); | |
| if (!keypad_data->keymap) { | |
| dev_err(dev, "Not enough memory for keymap\n"); | |
| return -ENOMEM; | |
| } | |
| error = matrix_keypad_build_keymap(NULL, NULL, | |
| keypad_data->rows, keypad_data->cols, | |
| keypad_data->keymap, input_dev); | |
| if (error) { | |
| dev_err(dev, "failed to build keymap\n"); | |
| return error; | |
| } | |
| error = devm_request_threaded_irq(dev, keypad_data->irq, | |
| omap4_keypad_irq_handler, | |
| omap4_keypad_irq_thread_fn, | |
| IRQF_ONESHOT, | |
| "omap4-keypad", keypad_data); | |
| if (error) { | |
| dev_err(dev, "failed to register interrupt\n"); | |
| return error; | |
| } | |
| error = input_register_device(keypad_data->input); | |
| if (error) { | |
| dev_err(dev, "failed to register input device\n"); | |
| return error; | |
| } | |
| device_init_wakeup(dev, true); | |
| error = dev_pm_set_wake_irq(dev, keypad_data->irq); | |
| if (error) | |
| dev_warn(dev, "failed to set up wakeup irq: %d\n", error); | |
| return 0; | |
| } | |
| static void omap4_keypad_remove(struct platform_device *pdev) | |
| { | |
| dev_pm_clear_wake_irq(&pdev->dev); | |
| } | |
| static const struct of_device_id omap_keypad_dt_match[] = { | |
| { .compatible = "ti,omap4-keypad" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, omap_keypad_dt_match); | |
| static struct platform_driver omap4_keypad_driver = { | |
| .probe = omap4_keypad_probe, | |
| .remove = omap4_keypad_remove, | |
| .driver = { | |
| .name = "omap4-keypad", | |
| .of_match_table = omap_keypad_dt_match, | |
| .pm = pm_ptr(&omap4_keypad_pm_ops), | |
| }, | |
| }; | |
| module_platform_driver(omap4_keypad_driver); | |
| MODULE_AUTHOR("Texas Instruments"); | |
| MODULE_DESCRIPTION("OMAP4 Keypad Driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:omap4-keypad"); |