| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Digital temperature sensor with integrated Non-volatile memory | |
| * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> | |
| * | |
| * Driver for the Texas Instruments TMP117 Temperature Sensor | |
| * (7-bit I2C slave address (0x48 - 0x4B), changeable via ADD pins) | |
| * | |
| * Note: This driver assumes that the sensor has been calibrated beforehand. | |
| */ | |
| #include <linux/array_size.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/bitops.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/limits.h> | |
| #include <linux/property.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/iio/iio.h> | |
| #define TMP117_REG_TEMP 0x0 | |
| #define TMP117_REG_CFGR 0x1 | |
| #define TMP117_REG_HIGH_LIM 0x2 | |
| #define TMP117_REG_LOW_LIM 0x3 | |
| #define TMP117_REG_EEPROM_UL 0x4 | |
| #define TMP117_REG_EEPROM1 0x5 | |
| #define TMP117_REG_EEPROM2 0x6 | |
| #define TMP117_REG_TEMP_OFFSET 0x7 | |
| #define TMP117_REG_EEPROM3 0x8 | |
| #define TMP117_REG_DEVICE_ID 0xF | |
| #define TMP117_RESOLUTION_10UC 78125 | |
| #define MICRODEGREE_PER_10MILLIDEGREE 10000 | |
| #define TMP116_DEVICE_ID 0x1116 | |
| #define TMP117_DEVICE_ID 0x0117 | |
| #define TMP119_DEVICE_ID 0x2117 | |
| struct tmp117_data { | |
| struct i2c_client *client; | |
| s16 calibbias; | |
| }; | |
| struct tmp11x_info { | |
| const char *name; | |
| struct iio_chan_spec const *channels; | |
| int num_channels; | |
| }; | |
| static int tmp117_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *channel, int *val, | |
| int *val2, long mask) | |
| { | |
| struct tmp117_data *data = iio_priv(indio_dev); | |
| s32 ret; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_RAW: | |
| ret = i2c_smbus_read_word_swapped(data->client, | |
| TMP117_REG_TEMP); | |
| if (ret < 0) | |
| return ret; | |
| *val = sign_extend32(ret, 15); | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| ret = i2c_smbus_read_word_swapped(data->client, | |
| TMP117_REG_TEMP_OFFSET); | |
| if (ret < 0) | |
| return ret; | |
| *val = sign_extend32(ret, 15); | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SCALE: | |
| /* | |
| * Conversion from 10s of uC to mC | |
| * as IIO reports temperature in mC | |
| */ | |
| *val = TMP117_RESOLUTION_10UC / MICRODEGREE_PER_10MILLIDEGREE; | |
| *val2 = (TMP117_RESOLUTION_10UC % | |
| MICRODEGREE_PER_10MILLIDEGREE) * 100; | |
| return IIO_VAL_INT_PLUS_MICRO; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tmp117_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec | |
| const *channel, int val, int val2, long mask) | |
| { | |
| struct tmp117_data *data = iio_priv(indio_dev); | |
| s16 off; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| off = clamp_t(int, val, S16_MIN, S16_MAX); | |
| if (off == data->calibbias) | |
| return 0; | |
| data->calibbias = off; | |
| return i2c_smbus_write_word_swapped(data->client, | |
| TMP117_REG_TEMP_OFFSET, off); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static const struct iio_chan_spec tmp117_channels[] = { | |
| { | |
| .type = IIO_TEMP, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | | |
| BIT(IIO_CHAN_INFO_SCALE), | |
| }, | |
| }; | |
| static const struct iio_chan_spec tmp116_channels[] = { | |
| { | |
| .type = IIO_TEMP, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | |
| BIT(IIO_CHAN_INFO_SCALE), | |
| }, | |
| }; | |
| static const struct tmp11x_info tmp116_channels_info = { | |
| .name = "tmp116", | |
| .channels = tmp116_channels, | |
| .num_channels = ARRAY_SIZE(tmp116_channels) | |
| }; | |
| static const struct tmp11x_info tmp117_channels_info = { | |
| .name = "tmp117", | |
| .channels = tmp117_channels, | |
| .num_channels = ARRAY_SIZE(tmp117_channels) | |
| }; | |
| static const struct tmp11x_info tmp119_channels_info = { | |
| .name = "tmp119", | |
| .channels = tmp117_channels, | |
| .num_channels = ARRAY_SIZE(tmp117_channels) | |
| }; | |
| static const struct iio_info tmp117_info = { | |
| .read_raw = tmp117_read_raw, | |
| .write_raw = tmp117_write_raw, | |
| }; | |
| static int tmp117_probe(struct i2c_client *client) | |
| { | |
| const struct tmp11x_info *match_data; | |
| struct tmp117_data *data; | |
| struct iio_dev *indio_dev; | |
| int dev_id; | |
| int ret; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) | |
| return -EOPNOTSUPP; | |
| ret = devm_regulator_get_enable(&client->dev, "vcc"); | |
| if (ret) | |
| return ret; | |
| fsleep(1500); | |
| dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID); | |
| if (dev_id < 0) | |
| return dev_id; | |
| switch (dev_id) { | |
| case TMP116_DEVICE_ID: | |
| match_data = &tmp116_channels_info; | |
| break; | |
| case TMP117_DEVICE_ID: | |
| match_data = &tmp117_channels_info; | |
| break; | |
| case TMP119_DEVICE_ID: | |
| match_data = &tmp119_channels_info; | |
| break; | |
| default: | |
| dev_info(&client->dev, | |
| "Unknown device id (0x%x), use fallback compatible\n", | |
| dev_id); | |
| match_data = i2c_get_match_data(client); | |
| } | |
| if (!match_data) | |
| return dev_err_probe(&client->dev, -ENODEV, | |
| "Failed to identify unsupported device\n"); | |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| data = iio_priv(indio_dev); | |
| data->client = client; | |
| data->calibbias = 0; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->info = &tmp117_info; | |
| indio_dev->channels = match_data->channels; | |
| indio_dev->num_channels = match_data->num_channels; | |
| indio_dev->name = match_data->name; | |
| return devm_iio_device_register(&client->dev, indio_dev); | |
| } | |
| static const struct of_device_id tmp117_of_match[] = { | |
| { .compatible = "ti,tmp116", .data = &tmp116_channels_info }, | |
| { .compatible = "ti,tmp117", .data = &tmp117_channels_info }, | |
| { .compatible = "ti,tmp119", .data = &tmp119_channels_info }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, tmp117_of_match); | |
| static const struct i2c_device_id tmp117_id[] = { | |
| { .name = "tmp116", .driver_data = (kernel_ulong_t)&tmp116_channels_info }, | |
| { .name = "tmp117", .driver_data = (kernel_ulong_t)&tmp117_channels_info }, | |
| { .name = "tmp119", .driver_data = (kernel_ulong_t)&tmp119_channels_info }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, tmp117_id); | |
| static struct i2c_driver tmp117_driver = { | |
| .driver = { | |
| .name = "tmp117", | |
| .of_match_table = tmp117_of_match, | |
| }, | |
| .probe = tmp117_probe, | |
| .id_table = tmp117_id, | |
| }; | |
| module_i2c_driver(tmp117_driver); | |
| MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); | |
| MODULE_DESCRIPTION("TI TMP117 Temperature sensor driver"); | |
| MODULE_LICENSE("GPL"); |