| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) 2021 Joe Sandom <joe.g.sandom@gmail.com> | |
| * | |
| * Datasheet: https://ams.com/tsl25911#tab/documents | |
| * | |
| * Device driver for the TAOS TSL2591. This is a very-high sensitivity | |
| * light-to-digital converter that transforms light intensity into a digital | |
| * signal. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/delay.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/unaligned.h> | |
| #include <linux/iio/events.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/sysfs.h> | |
| /* ADC integration time, field value to time in ms */ | |
| #define TSL2591_FVAL_TO_MSEC(x) (((x) + 1) * 100) | |
| /* ADC integration time, field value to time in seconds */ | |
| #define TSL2591_FVAL_TO_SEC(x) ((x) + 1) | |
| /* ADC integration time, time in seconds to field value */ | |
| #define TSL2591_SEC_TO_FVAL(x) ((x) - 1) | |
| /* TSL2591 register set */ | |
| #define TSL2591_ENABLE 0x00 | |
| #define TSL2591_CONTROL 0x01 | |
| #define TSL2591_AILTL 0x04 | |
| #define TSL2591_AILTH 0x05 | |
| #define TSL2591_AIHTL 0x06 | |
| #define TSL2591_AIHTH 0x07 | |
| #define TSL2591_NP_AILTL 0x08 | |
| #define TSL2591_NP_AILTH 0x09 | |
| #define TSL2591_NP_AIHTL 0x0A | |
| #define TSL2591_NP_AIHTH 0x0B | |
| #define TSL2591_PERSIST 0x0C | |
| #define TSL2591_PACKAGE_ID 0x11 | |
| #define TSL2591_DEVICE_ID 0x12 | |
| #define TSL2591_STATUS 0x13 | |
| #define TSL2591_C0_DATAL 0x14 | |
| #define TSL2591_C0_DATAH 0x15 | |
| #define TSL2591_C1_DATAL 0x16 | |
| #define TSL2591_C1_DATAH 0x17 | |
| /* TSL2591 command register definitions */ | |
| #define TSL2591_CMD_NOP 0xA0 | |
| #define TSL2591_CMD_SF_INTSET 0xE4 | |
| #define TSL2591_CMD_SF_CALS_I 0xE5 | |
| #define TSL2591_CMD_SF_CALS_NPI 0xE7 | |
| #define TSL2591_CMD_SF_CNP_ALSI 0xEA | |
| /* TSL2591 enable register definitions */ | |
| #define TSL2591_PWR_ON 0x01 | |
| #define TSL2591_PWR_OFF 0x00 | |
| #define TSL2591_ENABLE_ALS 0x02 | |
| #define TSL2591_ENABLE_ALS_INT 0x10 | |
| #define TSL2591_ENABLE_SLEEP_INT 0x40 | |
| #define TSL2591_ENABLE_NP_INT 0x80 | |
| /* TSL2591 control register definitions */ | |
| #define TSL2591_CTRL_ALS_INTEGRATION_100MS 0x00 | |
| #define TSL2591_CTRL_ALS_INTEGRATION_200MS 0x01 | |
| #define TSL2591_CTRL_ALS_INTEGRATION_300MS 0x02 | |
| #define TSL2591_CTRL_ALS_INTEGRATION_400MS 0x03 | |
| #define TSL2591_CTRL_ALS_INTEGRATION_500MS 0x04 | |
| #define TSL2591_CTRL_ALS_INTEGRATION_600MS 0x05 | |
| #define TSL2591_CTRL_ALS_LOW_GAIN 0x00 | |
| #define TSL2591_CTRL_ALS_MED_GAIN 0x10 | |
| #define TSL2591_CTRL_ALS_HIGH_GAIN 0x20 | |
| #define TSL2591_CTRL_ALS_MAX_GAIN 0x30 | |
| #define TSL2591_CTRL_SYS_RESET 0x80 | |
| /* TSL2591 persist register definitions */ | |
| #define TSL2591_PRST_ALS_INT_CYCLE_0 0x00 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_ANY 0x01 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_2 0x02 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_3 0x03 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_5 0x04 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_10 0x05 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_15 0x06 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_20 0x07 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_25 0x08 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_30 0x09 | |
| #define TSL2591_PRST_ALS_INT_CYCLE_35 0x0A | |
| #define TSL2591_PRST_ALS_INT_CYCLE_40 0x0B | |
| #define TSL2591_PRST_ALS_INT_CYCLE_45 0x0C | |
| #define TSL2591_PRST_ALS_INT_CYCLE_50 0x0D | |
| #define TSL2591_PRST_ALS_INT_CYCLE_55 0x0E | |
| #define TSL2591_PRST_ALS_INT_CYCLE_60 0x0F | |
| #define TSL2591_PRST_ALS_INT_CYCLE_MAX (BIT(4) - 1) | |
| /* TSL2591 PID register mask */ | |
| #define TSL2591_PACKAGE_ID_MASK GENMASK(5, 4) | |
| /* TSL2591 ID register mask */ | |
| #define TSL2591_DEVICE_ID_MASK GENMASK(7, 0) | |
| /* TSL2591 status register masks */ | |
| #define TSL2591_STS_ALS_VALID_MASK BIT(0) | |
| #define TSL2591_STS_ALS_INT_MASK BIT(4) | |
| #define TSL2591_STS_NPERS_INT_MASK BIT(5) | |
| #define TSL2591_STS_VAL_HIGH_MASK BIT(0) | |
| /* TSL2591 constant values */ | |
| #define TSL2591_PACKAGE_ID_VAL 0x00 | |
| #define TSL2591_DEVICE_ID_VAL 0x50 | |
| /* Power off suspend delay time MS */ | |
| #define TSL2591_POWER_OFF_DELAY_MS 2000 | |
| /* TSL2591 default values */ | |
| #define TSL2591_DEFAULT_ALS_INT_TIME TSL2591_CTRL_ALS_INTEGRATION_300MS | |
| #define TSL2591_DEFAULT_ALS_GAIN TSL2591_CTRL_ALS_MED_GAIN | |
| #define TSL2591_DEFAULT_ALS_PERSIST TSL2591_PRST_ALS_INT_CYCLE_ANY | |
| #define TSL2591_DEFAULT_ALS_LOWER_THRESH 100 | |
| #define TSL2591_DEFAULT_ALS_UPPER_THRESH 1500 | |
| /* TSL2591 number of data registers */ | |
| #define TSL2591_NUM_DATA_REGISTERS 4 | |
| /* TSL2591 number of valid status reads on ADC complete */ | |
| #define TSL2591_ALS_STS_VALID_COUNT 10 | |
| /* TSL2591 delay period between polls when checking for ALS valid flag */ | |
| #define TSL2591_DELAY_PERIOD_US 10000 | |
| /* TSL2591 maximum values */ | |
| #define TSL2591_MAX_ALS_INT_TIME_MS 600 | |
| #define TSL2591_ALS_MAX_VALUE (BIT(16) - 1) | |
| /* | |
| * LUX calculations; | |
| * AGAIN values from Adafruit's TSL2591 Arduino library | |
| * https://github.com/adafruit/Adafruit_TSL2591_Library | |
| */ | |
| #define TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER 1 | |
| #define TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER 25 | |
| #define TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER 428 | |
| #define TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER 9876 | |
| #define TSL2591_LUX_COEFFICIENT 408 | |
| struct tsl2591_als_settings { | |
| u16 als_lower_thresh; | |
| u16 als_upper_thresh; | |
| u8 als_int_time; | |
| u8 als_persist; | |
| u8 als_gain; | |
| }; | |
| struct tsl2591_chip { | |
| struct tsl2591_als_settings als_settings; | |
| struct i2c_client *client; | |
| /* | |
| * Keep als_settings in sync with hardware state | |
| * and ensure multiple readers are serialized. | |
| */ | |
| struct mutex als_mutex; | |
| bool events_enabled; | |
| }; | |
| /* | |
| * Period table is ALS persist cycle x integration time setting | |
| * Integration times: 100ms, 200ms, 300ms, 400ms, 500ms, 600ms | |
| * ALS cycles: 1, 2, 3, 5, 10, 20, 25, 30, 35, 40, 45, 50, 55, 60 | |
| */ | |
| static const char * const tsl2591_als_period_list[] = { | |
| "0.1 0.2 0.3 0.5 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0", | |
| "0.2 0.4 0.6 1.0 2.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0", | |
| "0.3 0.6 0.9 1.5 3.0 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0", | |
| "0.4 0.8 1.2 2.0 4.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0", | |
| "0.5 1.0 1.5 2.5 5.0 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0", | |
| "0.6 1.2 1.8 3.0 6.0 12.0 15.0 18.0 21.0 24.0 27.0 30.0 33.0 36.0", | |
| }; | |
| static const int tsl2591_int_time_available[] = { | |
| 1, 2, 3, 4, 5, 6, | |
| }; | |
| static const int tsl2591_calibscale_available[] = { | |
| 1, 25, 428, 9876, | |
| }; | |
| static const u8 tsl2591_persist_table[] = { | |
| [TSL2591_PRST_ALS_INT_CYCLE_ANY] = 1, | |
| [TSL2591_PRST_ALS_INT_CYCLE_2] = 2, | |
| [TSL2591_PRST_ALS_INT_CYCLE_3] = 3, | |
| [TSL2591_PRST_ALS_INT_CYCLE_5] = 5, | |
| [TSL2591_PRST_ALS_INT_CYCLE_10] = 10, | |
| [TSL2591_PRST_ALS_INT_CYCLE_15] = 15, | |
| [TSL2591_PRST_ALS_INT_CYCLE_20] = 20, | |
| [TSL2591_PRST_ALS_INT_CYCLE_25] = 25, | |
| [TSL2591_PRST_ALS_INT_CYCLE_30] = 30, | |
| [TSL2591_PRST_ALS_INT_CYCLE_35] = 35, | |
| [TSL2591_PRST_ALS_INT_CYCLE_40] = 40, | |
| [TSL2591_PRST_ALS_INT_CYCLE_45] = 45, | |
| [TSL2591_PRST_ALS_INT_CYCLE_50] = 50, | |
| [TSL2591_PRST_ALS_INT_CYCLE_55] = 55, | |
| [TSL2591_PRST_ALS_INT_CYCLE_60] = 60, | |
| }; | |
| static int tsl2591_set_als_lower_threshold(struct tsl2591_chip *chip, | |
| u16 als_lower_threshold); | |
| static int tsl2591_set_als_upper_threshold(struct tsl2591_chip *chip, | |
| u16 als_upper_threshold); | |
| static int tsl2591_gain_to_multiplier(const u8 als_gain) | |
| { | |
| switch (als_gain) { | |
| case TSL2591_CTRL_ALS_LOW_GAIN: | |
| return TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER; | |
| case TSL2591_CTRL_ALS_MED_GAIN: | |
| return TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER; | |
| case TSL2591_CTRL_ALS_HIGH_GAIN: | |
| return TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER; | |
| case TSL2591_CTRL_ALS_MAX_GAIN: | |
| return TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl2591_multiplier_to_gain(const u32 multiplier) | |
| { | |
| switch (multiplier) { | |
| case TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER: | |
| return TSL2591_CTRL_ALS_LOW_GAIN; | |
| case TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER: | |
| return TSL2591_CTRL_ALS_MED_GAIN; | |
| case TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER: | |
| return TSL2591_CTRL_ALS_HIGH_GAIN; | |
| case TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER: | |
| return TSL2591_CTRL_ALS_MAX_GAIN; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl2591_persist_cycle_to_lit(const u8 als_persist) | |
| { | |
| if (als_persist >= ARRAY_SIZE(tsl2591_persist_table) || | |
| !tsl2591_persist_table[als_persist]) | |
| return -EINVAL; | |
| return tsl2591_persist_table[als_persist]; | |
| } | |
| static int tsl2591_persist_lit_to_cycle(const u8 als_persist) | |
| { | |
| for (unsigned int i = TSL2591_PRST_ALS_INT_CYCLE_ANY; | |
| i < ARRAY_SIZE(tsl2591_persist_table); i++) { | |
| if (als_persist == tsl2591_persist_table[i]) | |
| return i; | |
| } | |
| return -EINVAL; | |
| } | |
| static int tsl2591_compatible_int_time(struct tsl2591_chip *chip, | |
| const u32 als_integration_time) | |
| { | |
| switch (als_integration_time) { | |
| case TSL2591_CTRL_ALS_INTEGRATION_100MS: | |
| case TSL2591_CTRL_ALS_INTEGRATION_200MS: | |
| case TSL2591_CTRL_ALS_INTEGRATION_300MS: | |
| case TSL2591_CTRL_ALS_INTEGRATION_400MS: | |
| case TSL2591_CTRL_ALS_INTEGRATION_500MS: | |
| case TSL2591_CTRL_ALS_INTEGRATION_600MS: | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl2591_als_time_to_fval(const u32 als_integration_time) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(tsl2591_int_time_available); i++) { | |
| if (als_integration_time == tsl2591_int_time_available[i]) | |
| return TSL2591_SEC_TO_FVAL(als_integration_time); | |
| } | |
| return -EINVAL; | |
| } | |
| static int tsl2591_compatible_gain(struct tsl2591_chip *chip, const u8 als_gain) | |
| { | |
| switch (als_gain) { | |
| case TSL2591_CTRL_ALS_LOW_GAIN: | |
| case TSL2591_CTRL_ALS_MED_GAIN: | |
| case TSL2591_CTRL_ALS_HIGH_GAIN: | |
| case TSL2591_CTRL_ALS_MAX_GAIN: | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl2591_check_als_valid(struct i2c_client *client) | |
| { | |
| int ret; | |
| ret = i2c_smbus_read_byte_data(client, TSL2591_CMD_NOP | TSL2591_STATUS); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to read register\n"); | |
| return -EINVAL; | |
| } | |
| return FIELD_GET(TSL2591_STS_ALS_VALID_MASK, ret); | |
| } | |
| static int tsl2591_wait_adc_complete(struct tsl2591_chip *chip) | |
| { | |
| struct tsl2591_als_settings settings = chip->als_settings; | |
| struct i2c_client *client = chip->client; | |
| int delay; | |
| int val; | |
| int ret; | |
| delay = TSL2591_FVAL_TO_MSEC(settings.als_int_time); | |
| if (!delay) | |
| return -EINVAL; | |
| /* | |
| * Sleep for ALS integration time to allow enough time or an ADC read | |
| * cycle to complete. Check status after delay for ALS valid. | |
| */ | |
| msleep(delay); | |
| /* Check for status ALS valid flag for up to 100ms */ | |
| ret = readx_poll_timeout(tsl2591_check_als_valid, client, | |
| val, val == TSL2591_STS_VAL_HIGH_MASK, | |
| TSL2591_DELAY_PERIOD_US, | |
| TSL2591_DELAY_PERIOD_US * TSL2591_ALS_STS_VALID_COUNT); | |
| if (ret) | |
| dev_err(&client->dev, "Timed out waiting for valid ALS data\n"); | |
| return ret; | |
| } | |
| /* | |
| * tsl2591_read_channel_data - Reads raw channel data and calculates lux | |
| * | |
| * Formula for lux calculation; | |
| * Derived from Adafruit's TSL2591 library | |
| * Link: https://github.com/adafruit/Adafruit_TSL2591_Library | |
| * Counts Per Lux (CPL) = (ATIME_ms * AGAIN) / LUX DF | |
| * lux = ((C0DATA - C1DATA) * (1 - (C1DATA / C0DATA))) / CPL | |
| * | |
| * Scale values to get more representative value of lux i.e. | |
| * lux = ((C0DATA - C1DATA) * (1000 - ((C1DATA * 1000) / C0DATA))) / CPL | |
| * | |
| * Channel 0 = IR + Visible | |
| * Channel 1 = IR only | |
| */ | |
| static int tsl2591_read_channel_data(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| struct tsl2591_als_settings *settings = &chip->als_settings; | |
| struct i2c_client *client = chip->client; | |
| u8 als_data[TSL2591_NUM_DATA_REGISTERS]; | |
| int counts_per_lux, int_time_fval, gain_multi, lux; | |
| u16 als_ch0, als_ch1; | |
| int ret; | |
| ret = tsl2591_wait_adc_complete(chip); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "No data available. Err: %d\n", ret); | |
| return ret; | |
| } | |
| ret = i2c_smbus_read_i2c_block_data(client, | |
| TSL2591_CMD_NOP | TSL2591_C0_DATAL, | |
| sizeof(als_data), als_data); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to read data bytes"); | |
| return ret; | |
| } | |
| als_ch0 = get_unaligned_le16(&als_data[0]); | |
| als_ch1 = get_unaligned_le16(&als_data[2]); | |
| switch (chan->type) { | |
| case IIO_INTENSITY: | |
| if (chan->channel2 == IIO_MOD_LIGHT_BOTH) | |
| *val = als_ch0; | |
| else if (chan->channel2 == IIO_MOD_LIGHT_IR) | |
| *val = als_ch1; | |
| else | |
| return -EINVAL; | |
| break; | |
| case IIO_LIGHT: | |
| gain_multi = tsl2591_gain_to_multiplier(settings->als_gain); | |
| if (gain_multi < 0) { | |
| dev_err(&client->dev, "Invalid multiplier"); | |
| return gain_multi; | |
| } | |
| int_time_fval = TSL2591_FVAL_TO_MSEC(settings->als_int_time); | |
| /* Calculate counts per lux value */ | |
| counts_per_lux = (int_time_fval * gain_multi) / TSL2591_LUX_COEFFICIENT; | |
| dev_dbg(&client->dev, "Counts Per Lux: %d\n", counts_per_lux); | |
| /* Calculate lux value */ | |
| lux = ((als_ch0 - als_ch1) * | |
| (1000 - ((als_ch1 * 1000) / als_ch0))) / counts_per_lux; | |
| dev_dbg(&client->dev, "Raw lux calculation: %d\n", lux); | |
| /* Divide by 1000 to get real lux value before scaling */ | |
| *val = lux / 1000; | |
| /* Get the decimal part of lux reading */ | |
| *val2 = (lux - (*val * 1000)) * 1000; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int tsl2591_set_als_gain_int_time(struct tsl2591_chip *chip) | |
| { | |
| struct tsl2591_als_settings als_settings = chip->als_settings; | |
| struct i2c_client *client = chip->client; | |
| int ret; | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_CONTROL, | |
| als_settings.als_int_time | als_settings.als_gain); | |
| if (ret) | |
| dev_err(&client->dev, "Failed to set als gain & int time\n"); | |
| return ret; | |
| } | |
| static int tsl2591_set_als_lower_threshold(struct tsl2591_chip *chip, | |
| u16 als_lower_threshold) | |
| { | |
| struct tsl2591_als_settings als_settings = chip->als_settings; | |
| struct i2c_client *client = chip->client; | |
| u16 als_upper_threshold; | |
| u8 als_lower_l; | |
| u8 als_lower_h; | |
| int ret; | |
| chip->als_settings.als_lower_thresh = als_lower_threshold; | |
| /* | |
| * Lower threshold should not be greater or equal to upper. | |
| * If this is the case, then assert upper threshold to new lower | |
| * threshold + 1 to avoid ordering issues when setting thresholds. | |
| */ | |
| if (als_lower_threshold >= als_settings.als_upper_thresh) { | |
| als_upper_threshold = als_lower_threshold + 1; | |
| tsl2591_set_als_upper_threshold(chip, als_upper_threshold); | |
| } | |
| als_lower_l = als_lower_threshold; | |
| als_lower_h = als_lower_threshold >> 8; | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_AILTL, | |
| als_lower_l); | |
| if (ret) { | |
| dev_err(&client->dev, "Failed to set als lower threshold\n"); | |
| return ret; | |
| } | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_AILTH, | |
| als_lower_h); | |
| if (ret) { | |
| dev_err(&client->dev, "Failed to set als lower threshold\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int tsl2591_set_als_upper_threshold(struct tsl2591_chip *chip, | |
| u16 als_upper_threshold) | |
| { | |
| struct tsl2591_als_settings als_settings = chip->als_settings; | |
| struct i2c_client *client = chip->client; | |
| u16 als_lower_threshold; | |
| u8 als_upper_l; | |
| u8 als_upper_h; | |
| int ret; | |
| if (als_upper_threshold > TSL2591_ALS_MAX_VALUE) | |
| return -EINVAL; | |
| chip->als_settings.als_upper_thresh = als_upper_threshold; | |
| /* | |
| * Upper threshold should not be less than lower. If this | |
| * is the case, then assert lower threshold to new upper | |
| * threshold - 1 to avoid ordering issues when setting thresholds. | |
| */ | |
| if (als_upper_threshold < als_settings.als_lower_thresh) { | |
| als_lower_threshold = als_upper_threshold - 1; | |
| tsl2591_set_als_lower_threshold(chip, als_lower_threshold); | |
| } | |
| als_upper_l = als_upper_threshold; | |
| als_upper_h = als_upper_threshold >> 8; | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_AIHTL, | |
| als_upper_l); | |
| if (ret) { | |
| dev_err(&client->dev, "Failed to set als upper threshold\n"); | |
| return ret; | |
| } | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_AIHTH, | |
| als_upper_h); | |
| if (ret) { | |
| dev_err(&client->dev, "Failed to set als upper threshold\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int tsl2591_set_als_persist_cycle(struct tsl2591_chip *chip, | |
| u8 als_persist) | |
| { | |
| struct i2c_client *client = chip->client; | |
| int ret; | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_PERSIST, | |
| als_persist); | |
| if (ret) | |
| dev_err(&client->dev, "Failed to set als persist cycle\n"); | |
| chip->als_settings.als_persist = als_persist; | |
| return ret; | |
| } | |
| static int tsl2591_set_power_state(struct tsl2591_chip *chip, u8 state) | |
| { | |
| struct i2c_client *client = chip->client; | |
| int ret; | |
| ret = i2c_smbus_write_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_ENABLE, | |
| state); | |
| if (ret) | |
| dev_err(&client->dev, | |
| "Failed to set the power state to %#04x\n", state); | |
| return ret; | |
| } | |
| static ssize_t tsl2591_in_illuminance_period_available_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| return sysfs_emit(buf, "%s\n", | |
| tsl2591_als_period_list[chip->als_settings.als_int_time]); | |
| } | |
| static IIO_DEVICE_ATTR_RO(tsl2591_in_illuminance_period_available, 0); | |
| static struct attribute *tsl2591_event_attrs_ctrl[] = { | |
| &iio_dev_attr_tsl2591_in_illuminance_period_available.dev_attr.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group tsl2591_event_attribute_group = { | |
| .attrs = tsl2591_event_attrs_ctrl, | |
| }; | |
| static const struct iio_event_spec tsl2591_events[] = { | |
| { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_RISING, | |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), | |
| }, { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_FALLING, | |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), | |
| }, { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_EITHER, | |
| .mask_separate = BIT(IIO_EV_INFO_PERIOD) | | |
| BIT(IIO_EV_INFO_ENABLE), | |
| }, | |
| }; | |
| static const struct iio_chan_spec tsl2591_channels[] = { | |
| { | |
| .type = IIO_INTENSITY, | |
| .modified = 1, | |
| .channel2 = IIO_MOD_LIGHT_IR, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | |
| .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| }, | |
| { | |
| .type = IIO_INTENSITY, | |
| .modified = 1, | |
| .channel2 = IIO_MOD_LIGHT_BOTH, | |
| .event_spec = tsl2591_events, | |
| .num_event_specs = ARRAY_SIZE(tsl2591_events), | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | |
| .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| }, | |
| { | |
| .type = IIO_LIGHT, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), | |
| .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| }, | |
| }; | |
| static int tsl2591_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2, long mask) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| struct i2c_client *client = chip->client; | |
| int ret; | |
| pm_runtime_get_sync(&client->dev); | |
| mutex_lock(&chip->als_mutex); | |
| switch (mask) { | |
| case IIO_CHAN_INFO_RAW: | |
| if (chan->type != IIO_INTENSITY) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_read_channel_data(indio_dev, chan, val, val2); | |
| if (ret < 0) | |
| goto err_unlock; | |
| ret = IIO_VAL_INT; | |
| break; | |
| case IIO_CHAN_INFO_PROCESSED: | |
| if (chan->type != IIO_LIGHT) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_read_channel_data(indio_dev, chan, val, val2); | |
| if (ret < 0) | |
| break; | |
| ret = IIO_VAL_INT_PLUS_MICRO; | |
| break; | |
| case IIO_CHAN_INFO_INT_TIME: | |
| if (chan->type != IIO_INTENSITY) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| *val = TSL2591_FVAL_TO_SEC(chip->als_settings.als_int_time); | |
| ret = IIO_VAL_INT; | |
| break; | |
| case IIO_CHAN_INFO_CALIBSCALE: | |
| if (chan->type != IIO_INTENSITY) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| *val = tsl2591_gain_to_multiplier(chip->als_settings.als_gain); | |
| ret = IIO_VAL_INT; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| err_unlock: | |
| mutex_unlock(&chip->als_mutex); | |
| pm_runtime_put_autosuspend(&client->dev); | |
| return ret; | |
| } | |
| static int tsl2591_write_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int val, int val2, long mask) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| int int_time; | |
| int gain; | |
| int ret; | |
| mutex_lock(&chip->als_mutex); | |
| switch (mask) { | |
| case IIO_CHAN_INFO_INT_TIME: | |
| int_time = tsl2591_als_time_to_fval(val); | |
| if (int_time < 0) { | |
| ret = int_time; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_compatible_int_time(chip, int_time); | |
| if (ret < 0) | |
| goto err_unlock; | |
| chip->als_settings.als_int_time = int_time; | |
| break; | |
| case IIO_CHAN_INFO_CALIBSCALE: | |
| gain = tsl2591_multiplier_to_gain(val); | |
| if (gain < 0) { | |
| ret = gain; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_compatible_gain(chip, gain); | |
| if (ret < 0) | |
| goto err_unlock; | |
| chip->als_settings.als_gain = gain; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_set_als_gain_int_time(chip); | |
| err_unlock: | |
| mutex_unlock(&chip->als_mutex); | |
| return ret; | |
| } | |
| static int tsl2591_read_available(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| const int **vals, int *type, int *length, | |
| long mask) | |
| { | |
| switch (mask) { | |
| case IIO_CHAN_INFO_INT_TIME: | |
| *length = ARRAY_SIZE(tsl2591_int_time_available); | |
| *vals = tsl2591_int_time_available; | |
| *type = IIO_VAL_INT; | |
| return IIO_AVAIL_LIST; | |
| case IIO_CHAN_INFO_CALIBSCALE: | |
| *length = ARRAY_SIZE(tsl2591_calibscale_available); | |
| *vals = tsl2591_calibscale_available; | |
| *type = IIO_VAL_INT; | |
| return IIO_AVAIL_LIST; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl2591_read_event_value(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, int *val, | |
| int *val2) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| struct i2c_client *client = chip->client; | |
| int als_persist, int_time, period; | |
| int ret; | |
| mutex_lock(&chip->als_mutex); | |
| switch (info) { | |
| case IIO_EV_INFO_VALUE: | |
| switch (dir) { | |
| case IIO_EV_DIR_RISING: | |
| *val = chip->als_settings.als_upper_thresh; | |
| break; | |
| case IIO_EV_DIR_FALLING: | |
| *val = chip->als_settings.als_lower_thresh; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| ret = IIO_VAL_INT; | |
| break; | |
| case IIO_EV_INFO_PERIOD: | |
| ret = i2c_smbus_read_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_PERSIST); | |
| if (ret <= 0 || ret > TSL2591_PRST_ALS_INT_CYCLE_MAX) | |
| goto err_unlock; | |
| als_persist = tsl2591_persist_cycle_to_lit(ret); | |
| int_time = TSL2591_FVAL_TO_MSEC(chip->als_settings.als_int_time); | |
| period = als_persist * (int_time * MSEC_PER_SEC); | |
| *val = period / USEC_PER_SEC; | |
| *val2 = period % USEC_PER_SEC; | |
| ret = IIO_VAL_INT_PLUS_MICRO; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| err_unlock: | |
| mutex_unlock(&chip->als_mutex); | |
| return ret; | |
| } | |
| static int tsl2591_write_event_value(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, int val, | |
| int val2) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| int period, int_time, als_persist; | |
| int ret; | |
| if (val < 0 || val2 < 0) | |
| return -EINVAL; | |
| mutex_lock(&chip->als_mutex); | |
| switch (info) { | |
| case IIO_EV_INFO_VALUE: | |
| if (val > TSL2591_ALS_MAX_VALUE) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| switch (dir) { | |
| case IIO_EV_DIR_RISING: | |
| ret = tsl2591_set_als_upper_threshold(chip, val); | |
| if (ret < 0) | |
| goto err_unlock; | |
| break; | |
| case IIO_EV_DIR_FALLING: | |
| ret = tsl2591_set_als_lower_threshold(chip, val); | |
| if (ret < 0) | |
| goto err_unlock; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| break; | |
| case IIO_EV_INFO_PERIOD: | |
| int_time = TSL2591_FVAL_TO_MSEC(chip->als_settings.als_int_time); | |
| period = ((val * MSEC_PER_SEC) + | |
| (val2 / MSEC_PER_SEC)) / int_time; | |
| als_persist = tsl2591_persist_lit_to_cycle(period); | |
| if (als_persist < 0) { | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| ret = tsl2591_set_als_persist_cycle(chip, als_persist); | |
| if (ret < 0) | |
| goto err_unlock; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| err_unlock: | |
| mutex_unlock(&chip->als_mutex); | |
| return ret; | |
| } | |
| static int tsl2591_read_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| return chip->events_enabled; | |
| } | |
| static int tsl2591_write_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| bool state) | |
| { | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| struct i2c_client *client = chip->client; | |
| if (state && !chip->events_enabled) { | |
| chip->events_enabled = true; | |
| pm_runtime_get_sync(&client->dev); | |
| } else if (!state && chip->events_enabled) { | |
| chip->events_enabled = false; | |
| pm_runtime_put_autosuspend(&client->dev); | |
| } | |
| return 0; | |
| } | |
| static const struct iio_info tsl2591_info = { | |
| .event_attrs = &tsl2591_event_attribute_group, | |
| .read_raw = tsl2591_read_raw, | |
| .write_raw = tsl2591_write_raw, | |
| .read_avail = tsl2591_read_available, | |
| .read_event_value = tsl2591_read_event_value, | |
| .write_event_value = tsl2591_write_event_value, | |
| .read_event_config = tsl2591_read_event_config, | |
| .write_event_config = tsl2591_write_event_config, | |
| }; | |
| static const struct iio_info tsl2591_info_no_irq = { | |
| .read_raw = tsl2591_read_raw, | |
| .write_raw = tsl2591_write_raw, | |
| .read_avail = tsl2591_read_available, | |
| }; | |
| static int tsl2591_suspend(struct device *dev) | |
| { | |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| int ret; | |
| mutex_lock(&chip->als_mutex); | |
| ret = tsl2591_set_power_state(chip, TSL2591_PWR_OFF); | |
| mutex_unlock(&chip->als_mutex); | |
| return ret; | |
| } | |
| static int tsl2591_resume(struct device *dev) | |
| { | |
| int power_state = TSL2591_PWR_ON | TSL2591_ENABLE_ALS; | |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| int ret; | |
| if (chip->events_enabled) | |
| power_state |= TSL2591_ENABLE_ALS_INT; | |
| mutex_lock(&chip->als_mutex); | |
| ret = tsl2591_set_power_state(chip, power_state); | |
| mutex_unlock(&chip->als_mutex); | |
| return ret; | |
| } | |
| static DEFINE_RUNTIME_DEV_PM_OPS(tsl2591_pm_ops, tsl2591_suspend, | |
| tsl2591_resume, NULL); | |
| static irqreturn_t tsl2591_event_handler(int irq, void *private) | |
| { | |
| struct iio_dev *dev_info = private; | |
| struct tsl2591_chip *chip = iio_priv(dev_info); | |
| struct i2c_client *client = chip->client; | |
| if (!chip->events_enabled) | |
| return IRQ_NONE; | |
| iio_push_event(dev_info, | |
| IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0, | |
| IIO_EV_TYPE_THRESH, | |
| IIO_EV_DIR_EITHER), | |
| iio_get_time_ns(dev_info)); | |
| /* Clear ALS irq */ | |
| i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI); | |
| return IRQ_HANDLED; | |
| } | |
| static int tsl2591_load_defaults(struct tsl2591_chip *chip) | |
| { | |
| int ret; | |
| chip->als_settings.als_int_time = TSL2591_DEFAULT_ALS_INT_TIME; | |
| chip->als_settings.als_gain = TSL2591_DEFAULT_ALS_GAIN; | |
| chip->als_settings.als_lower_thresh = TSL2591_DEFAULT_ALS_LOWER_THRESH; | |
| chip->als_settings.als_upper_thresh = TSL2591_DEFAULT_ALS_UPPER_THRESH; | |
| ret = tsl2591_set_als_gain_int_time(chip); | |
| if (ret < 0) | |
| return ret; | |
| ret = tsl2591_set_als_persist_cycle(chip, TSL2591_DEFAULT_ALS_PERSIST); | |
| if (ret < 0) | |
| return ret; | |
| ret = tsl2591_set_als_lower_threshold(chip, TSL2591_DEFAULT_ALS_LOWER_THRESH); | |
| if (ret < 0) | |
| return ret; | |
| ret = tsl2591_set_als_upper_threshold(chip, TSL2591_DEFAULT_ALS_UPPER_THRESH); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| static void tsl2591_chip_off(void *data) | |
| { | |
| struct iio_dev *indio_dev = data; | |
| struct tsl2591_chip *chip = iio_priv(indio_dev); | |
| struct i2c_client *client = chip->client; | |
| pm_runtime_disable(&client->dev); | |
| pm_runtime_set_suspended(&client->dev); | |
| pm_runtime_put_noidle(&client->dev); | |
| tsl2591_set_power_state(chip, TSL2591_PWR_OFF); | |
| } | |
| static int tsl2591_probe(struct i2c_client *client) | |
| { | |
| struct tsl2591_chip *chip; | |
| struct iio_dev *indio_dev; | |
| int ret; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { | |
| dev_err(&client->dev, | |
| "I2C smbus byte data functionality is not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| chip = iio_priv(indio_dev); | |
| chip->client = client; | |
| i2c_set_clientdata(client, indio_dev); | |
| if (client->irq) { | |
| ret = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, tsl2591_event_handler, | |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | |
| "tsl2591_irq", indio_dev); | |
| if (ret) | |
| return ret; | |
| indio_dev->info = &tsl2591_info; | |
| } else { | |
| indio_dev->info = &tsl2591_info_no_irq; | |
| } | |
| mutex_init(&chip->als_mutex); | |
| ret = i2c_smbus_read_byte_data(client, | |
| TSL2591_CMD_NOP | TSL2591_DEVICE_ID); | |
| if (ret < 0) { | |
| dev_err(&client->dev, | |
| "Failed to read the device ID register\n"); | |
| return ret; | |
| } | |
| ret = FIELD_GET(TSL2591_DEVICE_ID_MASK, ret); | |
| if (ret != TSL2591_DEVICE_ID_VAL) { | |
| dev_err(&client->dev, "Device ID: %#04x unknown\n", ret); | |
| return -EINVAL; | |
| } | |
| indio_dev->channels = tsl2591_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(tsl2591_channels); | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->name = chip->client->name; | |
| chip->events_enabled = false; | |
| pm_runtime_enable(&client->dev); | |
| pm_runtime_set_autosuspend_delay(&client->dev, | |
| TSL2591_POWER_OFF_DELAY_MS); | |
| pm_runtime_use_autosuspend(&client->dev); | |
| /* | |
| * Add chip off to automatically managed path and disable runtime | |
| * power management. This ensures that the chip power management | |
| * is handled correctly on driver remove. tsl2591_chip_off() must be | |
| * added to the managed path after pm runtime is enabled and before | |
| * any error exit paths are met to ensure we're not left in a state | |
| * of pm runtime not being disabled properly. | |
| */ | |
| ret = devm_add_action_or_reset(&client->dev, tsl2591_chip_off, | |
| indio_dev); | |
| if (ret < 0) | |
| return -EINVAL; | |
| ret = tsl2591_load_defaults(chip); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to load sensor defaults\n"); | |
| return -EINVAL; | |
| } | |
| ret = i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to clear als irq\n"); | |
| return -EINVAL; | |
| } | |
| return devm_iio_device_register(&client->dev, indio_dev); | |
| } | |
| static const struct of_device_id tsl2591_of_match[] = { | |
| { .compatible = "amstaos,tsl2591"}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, tsl2591_of_match); | |
| static struct i2c_driver tsl2591_driver = { | |
| .driver = { | |
| .name = "tsl2591", | |
| .pm = pm_ptr(&tsl2591_pm_ops), | |
| .of_match_table = tsl2591_of_match, | |
| }, | |
| .probe = tsl2591_probe | |
| }; | |
| module_i2c_driver(tsl2591_driver); | |
| MODULE_AUTHOR("Joe Sandom <joe.g.sandom@gmail.com>"); | |
| MODULE_DESCRIPTION("TAOS tsl2591 ambient light sensor driver"); | |
| MODULE_LICENSE("GPL"); |