| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * iio/adc/max11100.c | |
| * Maxim max11100 ADC Driver with IIO interface | |
| * | |
| * Copyright (C) 2016-17 Renesas Electronics Corporation | |
| * Copyright (C) 2016-17 Jacopo Mondi | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/unaligned.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/driver.h> | |
| /* | |
| * LSB is the ADC single digital step | |
| * 1 LSB = (vref_mv / 2 ^ 16) | |
| * | |
| * LSB is used to calculate analog voltage value | |
| * from the number of ADC steps count | |
| * | |
| * Ain = (count * LSB) | |
| */ | |
| #define MAX11100_LSB_DIV (1 << 16) | |
| struct max11100_state { | |
| struct regulator *vref_reg; | |
| struct spi_device *spi; | |
| /* | |
| * DMA (thus cache coherency maintenance) may require the | |
| * transfer buffers to live in their own cache lines. | |
| */ | |
| u8 buffer[3] __aligned(IIO_DMA_MINALIGN); | |
| }; | |
| static const struct iio_chan_spec max11100_channels[] = { | |
| { /* [0] */ | |
| .type = IIO_VOLTAGE, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | |
| BIT(IIO_CHAN_INFO_SCALE), | |
| }, | |
| }; | |
| static int max11100_read_single(struct iio_dev *indio_dev, int *val) | |
| { | |
| int ret; | |
| struct max11100_state *state = iio_priv(indio_dev); | |
| ret = spi_read(state->spi, state->buffer, sizeof(state->buffer)); | |
| if (ret) { | |
| dev_err(&indio_dev->dev, "SPI transfer failed\n"); | |
| return ret; | |
| } | |
| /* the first 8 bits sent out from ADC must be 0s */ | |
| if (state->buffer[0]) { | |
| dev_err(&indio_dev->dev, "Invalid value: buffer[0] != 0\n"); | |
| return -EINVAL; | |
| } | |
| *val = get_unaligned_be16(&state->buffer[1]); | |
| return 0; | |
| } | |
| static int max11100_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2, long info) | |
| { | |
| int ret, vref_uv; | |
| struct max11100_state *state = iio_priv(indio_dev); | |
| switch (info) { | |
| case IIO_CHAN_INFO_RAW: | |
| ret = max11100_read_single(indio_dev, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SCALE: | |
| vref_uv = regulator_get_voltage(state->vref_reg); | |
| if (vref_uv < 0) | |
| /* dummy regulator "get_voltage" returns -EINVAL */ | |
| return -EINVAL; | |
| *val = vref_uv / 1000; | |
| *val2 = MAX11100_LSB_DIV; | |
| return IIO_VAL_FRACTIONAL; | |
| } | |
| return -EINVAL; | |
| } | |
| static const struct iio_info max11100_info = { | |
| .read_raw = max11100_read_raw, | |
| }; | |
| static void max11100_regulator_disable(void *reg) | |
| { | |
| regulator_disable(reg); | |
| } | |
| static int max11100_probe(struct spi_device *spi) | |
| { | |
| int ret; | |
| struct iio_dev *indio_dev; | |
| struct max11100_state *state; | |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*state)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| state = iio_priv(indio_dev); | |
| state->spi = spi; | |
| indio_dev->name = "max11100"; | |
| indio_dev->info = &max11100_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->channels = max11100_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(max11100_channels); | |
| state->vref_reg = devm_regulator_get(&spi->dev, "vref"); | |
| if (IS_ERR(state->vref_reg)) | |
| return PTR_ERR(state->vref_reg); | |
| ret = regulator_enable(state->vref_reg); | |
| if (ret) | |
| return ret; | |
| ret = devm_add_action_or_reset(&spi->dev, max11100_regulator_disable, | |
| state->vref_reg); | |
| if (ret) | |
| return ret; | |
| return devm_iio_device_register(&spi->dev, indio_dev); | |
| } | |
| static const struct of_device_id max11100_ids[] = { | |
| { .compatible = "maxim,max11100" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, max11100_ids); | |
| static struct spi_driver max11100_driver = { | |
| .driver = { | |
| .name = "max11100", | |
| .of_match_table = max11100_ids, | |
| }, | |
| .probe = max11100_probe, | |
| }; | |
| module_spi_driver(max11100_driver); | |
| MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>"); | |
| MODULE_DESCRIPTION("Maxim max11100 ADC Driver"); | |
| MODULE_LICENSE("GPL v2"); |