| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| #ifndef __HWMON_NCT6775_H__ | |
| #define __HWMON_NCT6775_H__ | |
| #include <linux/types.h> | |
| enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, | |
| nct6793, nct6795, nct6796, nct6797, nct6798, nct6799 }; | |
| enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; | |
| #define NUM_TEMP 12 /* Max number of temp attribute sets w/ limits*/ | |
| #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ | |
| #define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ | |
| #define NUM_REG_ALARM 7 /* Max number of alarm registers */ | |
| #define NUM_REG_BEEP 5 /* Max number of beep registers */ | |
| #define NUM_FAN 7 | |
| #define NUM_IN 18 | |
| struct nct6775_data { | |
| int addr; /* IO base of hw monitor block */ | |
| int sioreg; /* SIO register address */ | |
| enum kinds kind; | |
| const char *name; | |
| const struct attribute_group *groups[7]; | |
| u8 num_groups; | |
| u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, | |
| * 3=temp_crit, 4=temp_lcrit | |
| */ | |
| u8 temp_src[NUM_TEMP]; | |
| u16 reg_temp_config[NUM_TEMP]; | |
| const char * const *temp_label; | |
| u32 temp_mask; | |
| u32 virt_temp_mask; | |
| u16 REG_CONFIG; | |
| u16 REG_VBAT; | |
| u16 REG_DIODE; | |
| u8 DIODE_MASK; | |
| const s8 *ALARM_BITS; | |
| const s8 *BEEP_BITS; | |
| const u16 *REG_VIN; | |
| const u16 *REG_IN_MINMAX[2]; | |
| const u16 *REG_TARGET; | |
| const u16 *REG_FAN; | |
| const u16 *REG_FAN_MODE; | |
| const u16 *REG_FAN_MIN; | |
| const u16 *REG_FAN_PULSES; | |
| const u16 *FAN_PULSE_SHIFT; | |
| const u16 *REG_FAN_TIME[3]; | |
| const u16 *REG_TOLERANCE_H; | |
| const u8 *REG_PWM_MODE; | |
| const u8 *PWM_MODE_MASK; | |
| const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, | |
| * [3]=pwm_max, [4]=pwm_step, | |
| * [5]=weight_duty_step, [6]=weight_duty_base | |
| */ | |
| const u16 *REG_PWM_READ; | |
| const u16 *REG_CRITICAL_PWM_ENABLE; | |
| u8 CRITICAL_PWM_ENABLE_MASK; | |
| const u16 *REG_CRITICAL_PWM; | |
| const u16 *REG_AUTO_TEMP; | |
| const u16 *REG_AUTO_PWM; | |
| const u16 *REG_CRITICAL_TEMP; | |
| const u16 *REG_CRITICAL_TEMP_TOLERANCE; | |
| const u16 *REG_TEMP_SOURCE; /* temp register sources */ | |
| const u16 *REG_TEMP_SEL; | |
| const u16 *REG_WEIGHT_TEMP_SEL; | |
| const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */ | |
| const u16 *REG_TEMP_OFFSET; | |
| const u16 *REG_ALARM; | |
| const u16 *REG_BEEP; | |
| const u16 *REG_TSI_TEMP; | |
| unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); | |
| unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); | |
| struct mutex update_lock; | |
| bool valid; /* true if following fields are valid */ | |
| unsigned long last_updated; /* In jiffies */ | |
| /* Register values */ | |
| u8 bank; /* current register bank */ | |
| u8 in_num; /* number of in inputs we have */ | |
| u8 in[NUM_IN][3]; /* [0]=in, [1]=in_max, [2]=in_min */ | |
| const u16 *scale_in; /* internal scaling factors */ | |
| unsigned int rpm[NUM_FAN]; | |
| u16 fan_min[NUM_FAN]; | |
| u8 fan_pulses[NUM_FAN]; | |
| u8 fan_div[NUM_FAN]; | |
| u8 has_pwm; | |
| u8 has_fan; /* some fan inputs can be disabled */ | |
| u8 has_fan_min; /* some fans don't have min register */ | |
| bool has_fan_div; | |
| u8 num_temp_alarms; /* 2, 3, or 6 */ | |
| u8 num_temp_beeps; /* 2, 3, or 6 */ | |
| u8 temp_fixed_num; /* 3 or 6 */ | |
| u8 temp_type[NUM_TEMP_FIXED]; | |
| s8 temp_offset[NUM_TEMP_FIXED]; | |
| s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, | |
| * 3=temp_crit, 4=temp_lcrit | |
| */ | |
| s16 tsi_temp[NUM_TSI_TEMP]; | |
| u64 alarms; | |
| u64 beeps; | |
| u8 pwm_num; /* number of pwm */ | |
| u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage, | |
| * 1->PWM variable duty cycle | |
| */ | |
| enum pwm_enable pwm_enable[NUM_FAN]; | |
| /* 0->off | |
| * 1->manual | |
| * 2->thermal cruise mode (also called SmartFan I) | |
| * 3->fan speed cruise mode | |
| * 4->SmartFan III | |
| * 5->enhanced variable thermal cruise (SmartFan IV) | |
| */ | |
| u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, | |
| * [3]=pwm_max, [4]=pwm_step, | |
| * [5]=weight_duty_step, [6]=weight_duty_base | |
| */ | |
| u8 target_temp[NUM_FAN]; | |
| u8 target_temp_mask; | |
| u32 target_speed[NUM_FAN]; | |
| u32 target_speed_tolerance[NUM_FAN]; | |
| u8 speed_tolerance_limit; | |
| u8 temp_tolerance[2][NUM_FAN]; | |
| u8 tolerance_mask; | |
| u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ | |
| /* Automatic fan speed control registers */ | |
| int auto_pwm_num; | |
| u8 auto_pwm[NUM_FAN][7]; | |
| u8 auto_temp[NUM_FAN][7]; | |
| u8 pwm_temp_sel[NUM_FAN]; | |
| u8 pwm_weight_temp_sel[NUM_FAN]; | |
| u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, | |
| * 2->temp_base | |
| */ | |
| u8 vid; | |
| u8 vrm; | |
| bool have_vid; | |
| u16 have_temp; | |
| u16 have_temp_fixed; | |
| u16 have_tsi_temp; | |
| u32 have_in; | |
| /* Remember extra register values over suspend/resume */ | |
| u8 vbat; | |
| u8 fandiv1; | |
| u8 fandiv2; | |
| u8 sio_reg_enable; | |
| struct regmap *regmap; | |
| bool read_only; | |
| /* driver-specific (platform, i2c) initialization hook and data */ | |
| int (*driver_init)(struct nct6775_data *data); | |
| void *driver_data; | |
| }; | |
| static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value) | |
| { | |
| unsigned int tmp; | |
| int ret = regmap_read(data->regmap, reg, &tmp); | |
| if (!ret) | |
| *value = tmp; | |
| return ret; | |
| } | |
| static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value) | |
| { | |
| return regmap_write(data->regmap, reg, value); | |
| } | |
| struct nct6775_data *nct6775_update_device(struct device *dev); | |
| bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg); | |
| int nct6775_probe(struct device *dev, struct nct6775_data *data, | |
| const struct regmap_config *regmapcfg); | |
| ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf); | |
| ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf); | |
| ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, | |
| size_t count); | |
| static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) | |
| { | |
| if (!nct6775_reg_is_word_sized(data, reg)) | |
| value >>= 8; | |
| return nct6775_write_value(data, reg, value); | |
| } | |
| static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr) | |
| { | |
| return data->read_only ? (attr->mode & ~0222) : attr->mode; | |
| } | |
| static inline int | |
| nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group) | |
| { | |
| /* Need to leave a NULL terminator at the end of data->groups */ | |
| if (data->num_groups == ARRAY_SIZE(data->groups) - 1) | |
| return -ENOBUFS; | |
| data->groups[data->num_groups++] = group; | |
| return 0; | |
| } | |
| #define NCT6775_REG_BANK 0x4E | |
| #define NCT6775_REG_CONFIG 0x40 | |
| #define NCT6775_REG_FANDIV1 0x506 | |
| #define NCT6775_REG_FANDIV2 0x507 | |
| #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 | |
| /* | |
| * ALARM_BITS and BEEP_BITS store bit-index for the mask of the registers | |
| * loaded into data->alarm and data->beep. | |
| * | |
| * Every input register (IN/TEMP/FAN) must have a corresponding | |
| * ALARM/BEEP bit at the same index BITS[BASE + index] | |
| * Set value to -1 to disable the visibility of that '*_alarm' attribute and | |
| * to pad the bits until the next BASE | |
| * | |
| * Beep has an additional GLOBAL_BEEP_ENABLE bit | |
| */ | |
| #define VIN_ALARM_BASE 0 | |
| #define FAN_ALARM_BASE 24 | |
| #define TEMP_ALARM_BASE 36 | |
| #define INTRUSION_ALARM_BASE 48 | |
| #define BEEP_ENABLE_BASE 50 | |
| #define NUM_ALARM_BITS (INTRUSION_ALARM_BASE + 4) | |
| #define NUM_BEEP_BITS (BEEP_ENABLE_BASE + 1) | |
| /* | |
| * Not currently used: | |
| * REG_MAN_ID has the value 0x5ca3 for all supported chips. | |
| * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. | |
| * REG_MAN_ID is at port 0x4f | |
| * REG_CHIP_ID is at port 0x58 | |
| */ | |
| #endif /* __HWMON_NCT6775_H__ */ |