| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * nct6775 - Platform driver for the hardware monitoring | |
| * functionality of Nuvoton NCT677x Super-I/O chips | |
| * | |
| * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/acpi.h> | |
| #include <linux/dmi.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/hwmon-vid.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include "nct6775.h" | |
| enum sensor_access { access_direct, access_asuswmi }; | |
| static const char * const nct6775_sio_names[] __initconst = { | |
| [nct6106] = "NCT6106D", | |
| [nct6116] = "NCT6116D", | |
| [nct6775] = "NCT6775F", | |
| [nct6776] = "NCT6776D/F", | |
| [nct6779] = "NCT6779D", | |
| [nct6791] = "NCT6791D", | |
| [nct6792] = "NCT6792D", | |
| [nct6793] = "NCT6793D", | |
| [nct6795] = "NCT6795D", | |
| [nct6796] = "NCT6796D", | |
| [nct6797] = "NCT6797D", | |
| [nct6798] = "NCT6798D/NCT5585D", | |
| [nct6799] = "NCT6796D-S/NCT6799D-R", | |
| }; | |
| static unsigned short force_id; | |
| module_param(force_id, ushort, 0); | |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); | |
| static unsigned short fan_debounce; | |
| module_param(fan_debounce, ushort, 0); | |
| MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); | |
| #define DRVNAME "nct6775" | |
| #define NCT6775_PORT_CHIPID 0x58 | |
| /* | |
| * ISA constants | |
| */ | |
| #define IOREGION_ALIGNMENT (~7) | |
| #define IOREGION_OFFSET 5 | |
| #define IOREGION_LENGTH 2 | |
| #define ADDR_REG_OFFSET 0 | |
| #define DATA_REG_OFFSET 1 | |
| /* | |
| * Super-I/O constants and functions | |
| */ | |
| #define NCT6775_LD_ACPI 0x0a | |
| #define NCT6775_LD_HWM 0x0b | |
| #define NCT6775_LD_VID 0x0d | |
| #define NCT6775_LD_12 0x12 | |
| #define SIO_REG_LDSEL 0x07 /* Logical device select */ | |
| #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ | |
| #define SIO_REG_ENABLE 0x30 /* Logical device enable */ | |
| #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ | |
| #define SIO_NCT6106_ID 0xc450 | |
| #define SIO_NCT6116_ID 0xd280 | |
| #define SIO_NCT6775_ID 0xb470 | |
| #define SIO_NCT6776_ID 0xc330 | |
| #define SIO_NCT6779_ID 0xc560 | |
| #define SIO_NCT6791_ID 0xc800 | |
| #define SIO_NCT6792_ID 0xc910 | |
| #define SIO_NCT6793_ID 0xd120 | |
| #define SIO_NCT6795_ID 0xd350 | |
| #define SIO_NCT6796_ID 0xd420 | |
| #define SIO_NCT6797_ID 0xd450 | |
| #define SIO_NCT6798_ID 0xd428 | |
| #define SIO_NCT6799_ID 0xd800 | |
| #define SIO_ID_MASK 0xFFF8 | |
| /* | |
| * Control registers | |
| */ | |
| #define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0 | |
| struct nct6775_sio_data { | |
| int sioreg; | |
| int ld; | |
| enum kinds kind; | |
| enum sensor_access access; | |
| /* superio_() callbacks */ | |
| void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); | |
| int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg); | |
| void (*sio_select)(struct nct6775_sio_data *sio_data, int ld); | |
| int (*sio_enter)(struct nct6775_sio_data *sio_data); | |
| void (*sio_exit)(struct nct6775_sio_data *sio_data); | |
| }; | |
| #define ASUSWMI_METHOD "WMBD" | |
| #define ASUSWMI_METHODID_RSIO 0x5253494F | |
| #define ASUSWMI_METHODID_WSIO 0x5753494F | |
| #define ASUSWMI_METHODID_RHWM 0x5248574D | |
| #define ASUSWMI_METHODID_WHWM 0x5748574D | |
| #define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE | |
| #define ASUSWMI_DEVICE_HID "PNP0C14" | |
| #define ASUSWMI_DEVICE_UID "ASUSWMI" | |
| #define ASUSMSI_DEVICE_UID "AsusMbSwInterface" | |
| #if IS_ENABLED(CONFIG_ACPI) | |
| /* | |
| * ASUS boards have only one device with WMI "WMBD" method and have provided | |
| * access to only one SuperIO chip at 0x0290. | |
| */ | |
| static struct acpi_device *asus_acpi_dev; | |
| #endif | |
| static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) | |
| { | |
| #if IS_ENABLED(CONFIG_ACPI) | |
| acpi_handle handle = acpi_device_handle(asus_acpi_dev); | |
| u32 args = bank | (reg << 8) | (val << 16); | |
| struct acpi_object_list input; | |
| union acpi_object params[3]; | |
| unsigned long long result; | |
| acpi_status status; | |
| params[0].type = ACPI_TYPE_INTEGER; | |
| params[0].integer.value = 0; | |
| params[1].type = ACPI_TYPE_INTEGER; | |
| params[1].integer.value = method_id; | |
| params[2].type = ACPI_TYPE_BUFFER; | |
| params[2].buffer.length = sizeof(args); | |
| params[2].buffer.pointer = (void *)&args; | |
| input.count = 3; | |
| input.pointer = params; | |
| status = acpi_evaluate_integer(handle, ASUSWMI_METHOD, &input, &result); | |
| if (ACPI_FAILURE(status)) | |
| return -EIO; | |
| if (retval) | |
| *retval = result; | |
| return 0; | |
| #else | |
| return -EOPNOTSUPP; | |
| #endif | |
| } | |
| static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) | |
| { | |
| return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, | |
| reg, val, NULL); | |
| } | |
| static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) | |
| { | |
| u32 tmp = 0; | |
| int ret; | |
| ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, | |
| reg, 0, &tmp); | |
| *val = tmp; | |
| return ret; | |
| } | |
| static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) | |
| { | |
| int tmp = 0; | |
| nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, | |
| reg, 0, &tmp); | |
| return tmp; | |
| } | |
| static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) | |
| { | |
| nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, | |
| reg, val, NULL); | |
| } | |
| static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) | |
| { | |
| sio_data->ld = ld; | |
| } | |
| static int superio_wmi_enter(struct nct6775_sio_data *sio_data) | |
| { | |
| return 0; | |
| } | |
| static void superio_wmi_exit(struct nct6775_sio_data *sio_data) | |
| { | |
| } | |
| static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) | |
| { | |
| int ioreg = sio_data->sioreg; | |
| outb(reg, ioreg); | |
| outb(val, ioreg + 1); | |
| } | |
| static int superio_inb(struct nct6775_sio_data *sio_data, int reg) | |
| { | |
| int ioreg = sio_data->sioreg; | |
| outb(reg, ioreg); | |
| return inb(ioreg + 1); | |
| } | |
| static void superio_select(struct nct6775_sio_data *sio_data, int ld) | |
| { | |
| int ioreg = sio_data->sioreg; | |
| outb(SIO_REG_LDSEL, ioreg); | |
| outb(ld, ioreg + 1); | |
| } | |
| static int superio_enter(struct nct6775_sio_data *sio_data) | |
| { | |
| int ioreg = sio_data->sioreg; | |
| /* | |
| * Try to reserve <ioreg> and <ioreg + 1> for exclusive access. | |
| */ | |
| if (!request_muxed_region(ioreg, 2, DRVNAME)) | |
| return -EBUSY; | |
| outb(0x87, ioreg); | |
| outb(0x87, ioreg); | |
| return 0; | |
| } | |
| static void superio_exit(struct nct6775_sio_data *sio_data) | |
| { | |
| int ioreg = sio_data->sioreg; | |
| outb(0xaa, ioreg); | |
| outb(0x02, ioreg); | |
| outb(0x02, ioreg + 1); | |
| release_region(ioreg, 2); | |
| } | |
| static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) | |
| { | |
| u8 bank = reg >> 8; | |
| data->bank = bank; | |
| } | |
| static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val) | |
| { | |
| struct nct6775_data *data = ctx; | |
| int err, word_sized = nct6775_reg_is_word_sized(data, reg); | |
| u8 tmp = 0; | |
| u16 res; | |
| nct6775_wmi_set_bank(data, reg); | |
| err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp); | |
| if (err) | |
| return err; | |
| res = tmp; | |
| if (word_sized) { | |
| err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); | |
| if (err) | |
| return err; | |
| res = (res << 8) + tmp; | |
| } | |
| *val = res; | |
| return 0; | |
| } | |
| static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value) | |
| { | |
| struct nct6775_data *data = ctx; | |
| int res, word_sized = nct6775_reg_is_word_sized(data, reg); | |
| nct6775_wmi_set_bank(data, reg); | |
| if (word_sized) { | |
| res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); | |
| if (res) | |
| return res; | |
| res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); | |
| } else { | |
| res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); | |
| } | |
| return res; | |
| } | |
| /* | |
| * On older chips, only registers 0x50-0x5f are banked. | |
| * On more recent chips, all registers are banked. | |
| * Assume that is the case and set the bank number for each access. | |
| * Cache the bank number so it only needs to be set if it changes. | |
| */ | |
| static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg) | |
| { | |
| u8 bank = reg >> 8; | |
| if (data->bank != bank) { | |
| outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET); | |
| outb_p(bank, data->addr + DATA_REG_OFFSET); | |
| data->bank = bank; | |
| } | |
| } | |
| static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val) | |
| { | |
| struct nct6775_data *data = ctx; | |
| int word_sized = nct6775_reg_is_word_sized(data, reg); | |
| nct6775_set_bank(data, reg); | |
| outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); | |
| *val = inb_p(data->addr + DATA_REG_OFFSET); | |
| if (word_sized) { | |
| outb_p((reg & 0xff) + 1, | |
| data->addr + ADDR_REG_OFFSET); | |
| *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET); | |
| } | |
| return 0; | |
| } | |
| static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value) | |
| { | |
| struct nct6775_data *data = ctx; | |
| int word_sized = nct6775_reg_is_word_sized(data, reg); | |
| nct6775_set_bank(data, reg); | |
| outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); | |
| if (word_sized) { | |
| outb_p(value >> 8, data->addr + DATA_REG_OFFSET); | |
| outb_p((reg & 0xff) + 1, | |
| data->addr + ADDR_REG_OFFSET); | |
| } | |
| outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); | |
| return 0; | |
| } | |
| static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data) | |
| { | |
| int val; | |
| val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); | |
| if (val & 0x10) { | |
| pr_info("Enabling hardware monitor logical device mappings.\n"); | |
| sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, | |
| val & ~0x10); | |
| } | |
| } | |
| static int nct6775_suspend(struct device *dev) | |
| { | |
| int err; | |
| u16 tmp; | |
| struct nct6775_data *data = nct6775_update_device(dev); | |
| if (IS_ERR(data)) | |
| return PTR_ERR(data); | |
| mutex_lock(&data->update_lock); | |
| err = nct6775_read_value(data, data->REG_VBAT, &tmp); | |
| if (err) | |
| goto out; | |
| data->vbat = tmp; | |
| if (data->kind == nct6775) { | |
| err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp); | |
| if (err) | |
| goto out; | |
| data->fandiv1 = tmp; | |
| err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp); | |
| if (err) | |
| goto out; | |
| data->fandiv2 = tmp; | |
| } | |
| out: | |
| mutex_unlock(&data->update_lock); | |
| return err; | |
| } | |
| static int nct6775_resume(struct device *dev) | |
| { | |
| struct nct6775_data *data = dev_get_drvdata(dev); | |
| struct nct6775_sio_data *sio_data = dev_get_platdata(dev); | |
| int i, j, err = 0; | |
| u8 reg; | |
| mutex_lock(&data->update_lock); | |
| data->bank = 0xff; /* Force initial bank selection */ | |
| err = sio_data->sio_enter(sio_data); | |
| if (err) | |
| goto abort; | |
| sio_data->sio_select(sio_data, NCT6775_LD_HWM); | |
| reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); | |
| if (reg != data->sio_reg_enable) | |
| sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); | |
| if (data->kind == nct6791 || data->kind == nct6792 || | |
| data->kind == nct6793 || data->kind == nct6795 || | |
| data->kind == nct6796 || data->kind == nct6797 || | |
| data->kind == nct6798 || data->kind == nct6799) | |
| nct6791_enable_io_mapping(sio_data); | |
| sio_data->sio_exit(sio_data); | |
| /* Restore limits */ | |
| for (i = 0; i < data->in_num; i++) { | |
| if (!(data->have_in & BIT(i))) | |
| continue; | |
| err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]); | |
| if (err) | |
| goto abort; | |
| err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]); | |
| if (err) | |
| goto abort; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { | |
| if (!(data->has_fan_min & BIT(i))) | |
| continue; | |
| err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]); | |
| if (err) | |
| goto abort; | |
| } | |
| for (i = 0; i < NUM_TEMP; i++) { | |
| if (!(data->have_temp & BIT(i))) | |
| continue; | |
| for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++) | |
| if (data->reg_temp[j][i]) { | |
| err = nct6775_write_temp(data, data->reg_temp[j][i], | |
| data->temp[j][i]); | |
| if (err) | |
| goto abort; | |
| } | |
| } | |
| /* Restore other settings */ | |
| err = nct6775_write_value(data, data->REG_VBAT, data->vbat); | |
| if (err) | |
| goto abort; | |
| if (data->kind == nct6775) { | |
| err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); | |
| if (err) | |
| goto abort; | |
| err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); | |
| } | |
| abort: | |
| /* Force re-reading all values */ | |
| data->valid = false; | |
| mutex_unlock(&data->update_lock); | |
| return err; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume); | |
| static void | |
| nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data) | |
| { | |
| bool fan3pin = false, fan4pin = false, fan4min = false; | |
| bool fan5pin = false, fan6pin = false, fan7pin = false; | |
| bool pwm3pin = false, pwm4pin = false, pwm5pin = false; | |
| bool pwm6pin = false, pwm7pin = false; | |
| /* Store SIO_REG_ENABLE for use during resume */ | |
| sio_data->sio_select(sio_data, NCT6775_LD_HWM); | |
| data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); | |
| /* fan4 and fan5 share some pins with the GPIO and serial flash */ | |
| if (data->kind == nct6775) { | |
| int cr2c = sio_data->sio_inb(sio_data, 0x2c); | |
| fan3pin = cr2c & BIT(6); | |
| pwm3pin = cr2c & BIT(7); | |
| /* On NCT6775, fan4 shares pins with the fdc interface */ | |
| fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80); | |
| } else if (data->kind == nct6776) { | |
| bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80; | |
| const char *board_vendor, *board_name; | |
| board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); | |
| board_name = dmi_get_system_info(DMI_BOARD_NAME); | |
| if (board_name && board_vendor && | |
| !strcmp(board_vendor, "ASRock")) { | |
| /* | |
| * Auxiliary fan monitoring is not enabled on ASRock | |
| * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode. | |
| * Observed with BIOS version 2.00. | |
| */ | |
| if (!strcmp(board_name, "Z77 Pro4-M")) { | |
| if ((data->sio_reg_enable & 0xe0) != 0xe0) { | |
| data->sio_reg_enable |= 0xe0; | |
| sio_data->sio_outb(sio_data, SIO_REG_ENABLE, | |
| data->sio_reg_enable); | |
| } | |
| } | |
| } | |
| if (data->sio_reg_enable & 0x80) | |
| fan3pin = gpok; | |
| else | |
| fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40); | |
| if (data->sio_reg_enable & 0x40) | |
| fan4pin = gpok; | |
| else | |
| fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01; | |
| if (data->sio_reg_enable & 0x20) | |
| fan5pin = gpok; | |
| else | |
| fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02; | |
| fan4min = fan4pin; | |
| pwm3pin = fan3pin; | |
| } else if (data->kind == nct6106) { | |
| int cr24 = sio_data->sio_inb(sio_data, 0x24); | |
| fan3pin = !(cr24 & 0x80); | |
| pwm3pin = cr24 & 0x08; | |
| } else if (data->kind == nct6116) { | |
| int cr1a = sio_data->sio_inb(sio_data, 0x1a); | |
| int cr1b = sio_data->sio_inb(sio_data, 0x1b); | |
| int cr24 = sio_data->sio_inb(sio_data, 0x24); | |
| int cr2a = sio_data->sio_inb(sio_data, 0x2a); | |
| int cr2b = sio_data->sio_inb(sio_data, 0x2b); | |
| int cr2f = sio_data->sio_inb(sio_data, 0x2f); | |
| fan3pin = !(cr2b & 0x10); | |
| fan4pin = (cr2b & 0x80) || // pin 1(2) | |
| (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66) | |
| fan5pin = (cr2b & 0x80) || // pin 126(127) | |
| (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96) | |
| pwm3pin = fan3pin && (cr24 & 0x08); | |
| pwm4pin = fan4pin; | |
| pwm5pin = fan5pin; | |
| } else { | |
| /* | |
| * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, | |
| * NCT6797D, NCT6798D, NCT6799D | |
| */ | |
| int cr1a = sio_data->sio_inb(sio_data, 0x1a); | |
| int cr1b = sio_data->sio_inb(sio_data, 0x1b); | |
| int cr1c = sio_data->sio_inb(sio_data, 0x1c); | |
| int cr1d = sio_data->sio_inb(sio_data, 0x1d); | |
| int cr2a = sio_data->sio_inb(sio_data, 0x2a); | |
| int cr2b = sio_data->sio_inb(sio_data, 0x2b); | |
| int cr2d = sio_data->sio_inb(sio_data, 0x2d); | |
| int cr2f = sio_data->sio_inb(sio_data, 0x2f); | |
| bool vsb_ctl_en = cr2f & BIT(0); | |
| bool dsw_en = cr2f & BIT(3); | |
| bool ddr4_en = cr2f & BIT(4); | |
| bool as_seq1_en = cr2f & BIT(7); | |
| int cre0; | |
| int cre6; | |
| int creb; | |
| int cred; | |
| cre6 = sio_data->sio_inb(sio_data, 0xe6); | |
| sio_data->sio_select(sio_data, NCT6775_LD_12); | |
| cre0 = sio_data->sio_inb(sio_data, 0xe0); | |
| creb = sio_data->sio_inb(sio_data, 0xeb); | |
| cred = sio_data->sio_inb(sio_data, 0xed); | |
| fan3pin = !(cr1c & BIT(5)); | |
| fan4pin = !(cr1c & BIT(6)); | |
| fan5pin = !(cr1c & BIT(7)); | |
| pwm3pin = !(cr1c & BIT(0)); | |
| pwm4pin = !(cr1c & BIT(1)); | |
| pwm5pin = !(cr1c & BIT(2)); | |
| switch (data->kind) { | |
| case nct6791: | |
| fan6pin = cr2d & BIT(1); | |
| pwm6pin = cr2d & BIT(0); | |
| break; | |
| case nct6792: | |
| fan6pin = !dsw_en && (cr2d & BIT(1)); | |
| pwm6pin = !dsw_en && (cr2d & BIT(0)); | |
| break; | |
| case nct6793: | |
| fan5pin |= cr1b & BIT(5); | |
| fan5pin |= creb & BIT(5); | |
| fan6pin = !dsw_en && (cr2d & BIT(1)); | |
| fan6pin |= creb & BIT(3); | |
| pwm5pin |= cr2d & BIT(7); | |
| pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm6pin = !dsw_en && (cr2d & BIT(0)); | |
| pwm6pin |= creb & BIT(2); | |
| break; | |
| case nct6795: | |
| fan5pin |= cr1b & BIT(5); | |
| fan5pin |= creb & BIT(5); | |
| fan6pin = (cr2a & BIT(4)) && | |
| (!dsw_en || (cred & BIT(4))); | |
| fan6pin |= creb & BIT(3); | |
| pwm5pin |= cr2d & BIT(7); | |
| pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); | |
| pwm6pin |= creb & BIT(2); | |
| break; | |
| case nct6796: | |
| fan5pin |= cr1b & BIT(5); | |
| fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0)); | |
| fan5pin |= creb & BIT(5); | |
| fan6pin = (cr2a & BIT(4)) && | |
| (!dsw_en || (cred & BIT(4))); | |
| fan6pin |= creb & BIT(3); | |
| fan7pin = !(cr2b & BIT(2)); | |
| pwm5pin |= cr2d & BIT(7); | |
| pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0)); | |
| pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); | |
| pwm6pin |= creb & BIT(2); | |
| pwm7pin = !(cr1d & (BIT(2) | BIT(3))); | |
| break; | |
| case nct6797: | |
| fan5pin |= !ddr4_en && (cr1b & BIT(5)); | |
| fan5pin |= creb & BIT(5); | |
| fan6pin = cr2a & BIT(4); | |
| fan6pin |= creb & BIT(3); | |
| fan7pin = cr1a & BIT(1); | |
| pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm5pin |= !ddr4_en && (cr2d & BIT(7)); | |
| pwm6pin = creb & BIT(2); | |
| pwm6pin |= cred & BIT(2); | |
| pwm7pin = cr1d & BIT(4); | |
| break; | |
| case nct6798: | |
| fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3)); | |
| fan6pin |= cr2a & BIT(4); | |
| fan6pin |= creb & BIT(5); | |
| fan7pin = cr1b & BIT(5); | |
| fan7pin |= !(cr2b & BIT(2)); | |
| fan7pin |= creb & BIT(3); | |
| pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4)); | |
| pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3)); | |
| pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm7pin = !(cr1d & (BIT(2) | BIT(3))); | |
| pwm7pin |= cr2d & BIT(7); | |
| pwm7pin |= creb & BIT(2); | |
| break; | |
| case nct6799: | |
| fan4pin = cr1c & BIT(6); | |
| fan5pin = cr1c & BIT(7); | |
| fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3)); | |
| fan6pin |= cre6 & BIT(5); | |
| fan6pin |= creb & BIT(5); | |
| fan6pin |= !as_seq1_en && (cr2a & BIT(4)); | |
| fan7pin = cr1b & BIT(5); | |
| fan7pin |= !vsb_ctl_en && !(cr2b & BIT(2)); | |
| fan7pin |= creb & BIT(3); | |
| pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4)); | |
| pwm6pin |= !as_seq1_en && !(cred & BIT(2)) && (cr2a & BIT(3)); | |
| pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); | |
| pwm6pin |= cre6 & BIT(3); | |
| pwm7pin = !vsb_ctl_en && !(cr1d & (BIT(2) | BIT(3))); | |
| pwm7pin |= creb & BIT(2); | |
| pwm7pin |= cr2d & BIT(7); | |
| break; | |
| default: /* NCT6779D */ | |
| break; | |
| } | |
| fan4min = fan4pin; | |
| } | |
| /* fan 1 and 2 (0x03) are always present */ | |
| data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) | | |
| (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); | |
| data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) | | |
| (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); | |
| data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | | |
| (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6); | |
| } | |
| static ssize_t | |
| cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct nct6775_data *data = dev_get_drvdata(dev); | |
| return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); | |
| } | |
| static DEVICE_ATTR_RO(cpu0_vid); | |
| /* Case open detection */ | |
| static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee }; | |
| static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 }; | |
| static ssize_t | |
| clear_caseopen(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct nct6775_data *data = dev_get_drvdata(dev); | |
| struct nct6775_sio_data *sio_data = data->driver_data; | |
| int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE; | |
| unsigned long val; | |
| u8 reg; | |
| int ret; | |
| if (kstrtoul(buf, 10, &val) || val != 0) | |
| return -EINVAL; | |
| mutex_lock(&data->update_lock); | |
| /* | |
| * Use CR registers to clear caseopen status. | |
| * The CR registers are the same for all chips, and not all chips | |
| * support clearing the caseopen status through "regular" registers. | |
| */ | |
| ret = sio_data->sio_enter(sio_data); | |
| if (ret) { | |
| count = ret; | |
| goto error; | |
| } | |
| sio_data->sio_select(sio_data, NCT6775_LD_ACPI); | |
| reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]); | |
| reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr]; | |
| sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); | |
| reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr]; | |
| sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); | |
| sio_data->sio_exit(sio_data); | |
| data->valid = false; /* Force cache refresh */ | |
| error: | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, nct6775_show_alarm, | |
| clear_caseopen, INTRUSION_ALARM_BASE); | |
| static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, nct6775_show_alarm, | |
| clear_caseopen, INTRUSION_ALARM_BASE + 1); | |
| static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, nct6775_show_beep, | |
| nct6775_store_beep, INTRUSION_ALARM_BASE); | |
| static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, nct6775_show_beep, | |
| nct6775_store_beep, INTRUSION_ALARM_BASE + 1); | |
| static SENSOR_DEVICE_ATTR(beep_enable, 0644, nct6775_show_beep, | |
| nct6775_store_beep, BEEP_ENABLE_BASE); | |
| static umode_t nct6775_other_is_visible(struct kobject *kobj, | |
| struct attribute *attr, int index) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct nct6775_data *data = dev_get_drvdata(dev); | |
| if (index == 0 && !data->have_vid) | |
| return 0; | |
| if (index == 1 || index == 2) { | |
| if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0) | |
| return 0; | |
| } | |
| if (index == 3 || index == 4) { | |
| if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0) | |
| return 0; | |
| } | |
| return nct6775_attr_mode(data, attr); | |
| } | |
| /* | |
| * nct6775_other_is_visible uses the index into the following array | |
| * to determine if attributes should be created or not. | |
| * Any change in order or content must be matched. | |
| */ | |
| static struct attribute *nct6775_attributes_other[] = { | |
| &dev_attr_cpu0_vid.attr, /* 0 */ | |
| &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */ | |
| &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */ | |
| &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */ | |
| &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */ | |
| &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */ | |
| NULL | |
| }; | |
| static const struct attribute_group nct6775_group_other = { | |
| .attrs = nct6775_attributes_other, | |
| .is_visible = nct6775_other_is_visible, | |
| }; | |
| static int nct6775_platform_probe_init(struct nct6775_data *data) | |
| { | |
| int err; | |
| u8 cr2a; | |
| struct nct6775_sio_data *sio_data = data->driver_data; | |
| err = sio_data->sio_enter(sio_data); | |
| if (err) | |
| return err; | |
| cr2a = sio_data->sio_inb(sio_data, 0x2a); | |
| switch (data->kind) { | |
| case nct6775: | |
| data->have_vid = (cr2a & 0x40); | |
| break; | |
| case nct6776: | |
| data->have_vid = (cr2a & 0x60) == 0x40; | |
| break; | |
| case nct6106: | |
| case nct6116: | |
| case nct6779: | |
| case nct6791: | |
| case nct6792: | |
| case nct6793: | |
| case nct6795: | |
| case nct6796: | |
| case nct6797: | |
| case nct6798: | |
| case nct6799: | |
| break; | |
| } | |
| /* | |
| * Read VID value | |
| * We can get the VID input values directly at logical device D 0xe3. | |
| */ | |
| if (data->have_vid) { | |
| sio_data->sio_select(sio_data, NCT6775_LD_VID); | |
| data->vid = sio_data->sio_inb(sio_data, 0xe3); | |
| data->vrm = vid_which_vrm(); | |
| } | |
| if (fan_debounce) { | |
| u8 tmp; | |
| sio_data->sio_select(sio_data, NCT6775_LD_HWM); | |
| tmp = sio_data->sio_inb(sio_data, | |
| NCT6775_REG_CR_FAN_DEBOUNCE); | |
| switch (data->kind) { | |
| case nct6106: | |
| case nct6116: | |
| tmp |= 0xe0; | |
| break; | |
| case nct6775: | |
| tmp |= 0x1e; | |
| break; | |
| case nct6776: | |
| case nct6779: | |
| tmp |= 0x3e; | |
| break; | |
| case nct6791: | |
| case nct6792: | |
| case nct6793: | |
| case nct6795: | |
| case nct6796: | |
| case nct6797: | |
| case nct6798: | |
| case nct6799: | |
| tmp |= 0x7e; | |
| break; | |
| } | |
| sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE, | |
| tmp); | |
| pr_info("Enabled fan debounce for chip %s\n", data->name); | |
| } | |
| nct6775_check_fan_inputs(data, sio_data); | |
| sio_data->sio_exit(sio_data); | |
| return nct6775_add_attr_group(data, &nct6775_group_other); | |
| } | |
| static const struct regmap_config nct6775_regmap_config = { | |
| .reg_bits = 16, | |
| .val_bits = 16, | |
| .reg_read = nct6775_reg_read, | |
| .reg_write = nct6775_reg_write, | |
| }; | |
| static const struct regmap_config nct6775_wmi_regmap_config = { | |
| .reg_bits = 16, | |
| .val_bits = 16, | |
| .reg_read = nct6775_wmi_reg_read, | |
| .reg_write = nct6775_wmi_reg_write, | |
| }; | |
| static int nct6775_platform_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct nct6775_sio_data *sio_data = dev_get_platdata(dev); | |
| struct nct6775_data *data; | |
| struct resource *res; | |
| const struct regmap_config *regmapcfg; | |
| if (sio_data->access == access_direct) { | |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); | |
| if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME)) | |
| return -EBUSY; | |
| } | |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->kind = sio_data->kind; | |
| data->sioreg = sio_data->sioreg; | |
| if (sio_data->access == access_direct) { | |
| data->addr = res->start; | |
| regmapcfg = &nct6775_regmap_config; | |
| } else { | |
| regmapcfg = &nct6775_wmi_regmap_config; | |
| } | |
| platform_set_drvdata(pdev, data); | |
| data->driver_data = sio_data; | |
| data->driver_init = nct6775_platform_probe_init; | |
| return nct6775_probe(&pdev->dev, data, regmapcfg); | |
| } | |
| static struct platform_driver nct6775_driver = { | |
| .driver = { | |
| .name = DRVNAME, | |
| .pm = pm_sleep_ptr(&nct6775_dev_pm_ops), | |
| }, | |
| .probe = nct6775_platform_probe, | |
| }; | |
| /* nct6775_find() looks for a '627 in the Super-I/O config space */ | |
| static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) | |
| { | |
| u16 val; | |
| int err; | |
| int addr; | |
| sio_data->access = access_direct; | |
| sio_data->sioreg = sioaddr; | |
| err = sio_data->sio_enter(sio_data); | |
| if (err) | |
| return err; | |
| val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) | | |
| sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1); | |
| if (force_id && val != 0xffff) | |
| val = force_id; | |
| switch (val & SIO_ID_MASK) { | |
| case SIO_NCT6106_ID: | |
| sio_data->kind = nct6106; | |
| break; | |
| case SIO_NCT6116_ID: | |
| sio_data->kind = nct6116; | |
| break; | |
| case SIO_NCT6775_ID: | |
| sio_data->kind = nct6775; | |
| break; | |
| case SIO_NCT6776_ID: | |
| sio_data->kind = nct6776; | |
| break; | |
| case SIO_NCT6779_ID: | |
| sio_data->kind = nct6779; | |
| break; | |
| case SIO_NCT6791_ID: | |
| sio_data->kind = nct6791; | |
| break; | |
| case SIO_NCT6792_ID: | |
| sio_data->kind = nct6792; | |
| break; | |
| case SIO_NCT6793_ID: | |
| sio_data->kind = nct6793; | |
| break; | |
| case SIO_NCT6795_ID: | |
| sio_data->kind = nct6795; | |
| break; | |
| case SIO_NCT6796_ID: | |
| sio_data->kind = nct6796; | |
| break; | |
| case SIO_NCT6797_ID: | |
| sio_data->kind = nct6797; | |
| break; | |
| case SIO_NCT6798_ID: | |
| sio_data->kind = nct6798; | |
| break; | |
| case SIO_NCT6799_ID: | |
| sio_data->kind = nct6799; | |
| break; | |
| default: | |
| if (val != 0xffff) | |
| pr_debug("unsupported chip ID: 0x%04x\n", val); | |
| sio_data->sio_exit(sio_data); | |
| return -ENODEV; | |
| } | |
| /* We have a known chip, find the HWM I/O address */ | |
| sio_data->sio_select(sio_data, NCT6775_LD_HWM); | |
| val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8) | |
| | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1); | |
| addr = val & IOREGION_ALIGNMENT; | |
| if (addr == 0) { | |
| pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); | |
| sio_data->sio_exit(sio_data); | |
| return -ENODEV; | |
| } | |
| /* Activate logical device if needed */ | |
| val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); | |
| if (!(val & 0x01)) { | |
| pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); | |
| sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01); | |
| } | |
| if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || | |
| sio_data->kind == nct6793 || sio_data->kind == nct6795 || | |
| sio_data->kind == nct6796 || sio_data->kind == nct6797 || | |
| sio_data->kind == nct6798 || sio_data->kind == nct6799) | |
| nct6791_enable_io_mapping(sio_data); | |
| sio_data->sio_exit(sio_data); | |
| pr_info("Found %s or compatible chip at %#x:%#x\n", | |
| nct6775_sio_names[sio_data->kind], sioaddr, addr); | |
| return addr; | |
| } | |
| /* | |
| * when Super-I/O functions move to a separate file, the Super-I/O | |
| * bus will manage the lifetime of the device and this module will only keep | |
| * track of the nct6775 driver. But since we use platform_device_alloc(), we | |
| * must keep track of the device | |
| */ | |
| static struct platform_device *pdev[2]; | |
| static const char * const asus_wmi_boards[] = { | |
| "B360M-BASALT", | |
| "B360M-D3H", | |
| "EX-B360M-V", | |
| "EX-B360M-V3", | |
| "EX-B360M-V5", | |
| "EX-B460M-V5", | |
| "EX-H410M-V3", | |
| "PRIME A520M-A", | |
| "PRIME A520M-A II", | |
| "PRIME A520M-E", | |
| "PRIME A520M-K", | |
| "PRIME B360-PLUS", | |
| "PRIME B360M-A", | |
| "PRIME B360M-C", | |
| "PRIME B360M-D", | |
| "PRIME B360M-K", | |
| "PRIME B460-PLUS", | |
| "PRIME B460I-PLUS", | |
| "PRIME B460M-A", | |
| "PRIME B460M-A R2.0", | |
| "PRIME B460M-K", | |
| "PRIME B550-PLUS", | |
| "PRIME B550-PLUS AC-HES", | |
| "PRIME B550M-A", | |
| "PRIME B550M-A (WI-FI)", | |
| "PRIME B550M-A AC", | |
| "PRIME B550M-A WIFI II", | |
| "PRIME B550M-K", | |
| "PRIME H310-PLUS", | |
| "PRIME H310I-PLUS", | |
| "PRIME H310M-A", | |
| "PRIME H310M-C", | |
| "PRIME H310M-D", | |
| "PRIME H310M-DASH", | |
| "PRIME H310M-E", | |
| "PRIME H310M-E/BR", | |
| "PRIME H310M-F", | |
| "PRIME H310M-K", | |
| "PRIME H310T", | |
| "PRIME H370-A", | |
| "PRIME H370-PLUS", | |
| "PRIME H370M-PLUS", | |
| "PRIME H410I-PLUS", | |
| "PRIME H410M-A", | |
| "PRIME H410M-D", | |
| "PRIME H410M-E", | |
| "PRIME H410M-F", | |
| "PRIME H410M-K", | |
| "PRIME H410M-K R2.0", | |
| "PRIME H410M-R", | |
| "PRIME H470-PLUS", | |
| "PRIME H470M-PLUS", | |
| "PRIME H510M-K R2.0", | |
| "PRIME Q370M-C", | |
| "PRIME X570-P", | |
| "PRIME X570-PRO", | |
| "PRIME Z390-A", | |
| "PRIME Z390-A/H10", | |
| "PRIME Z390-P", | |
| "PRIME Z390M-PLUS", | |
| "PRIME Z490-A", | |
| "PRIME Z490-P", | |
| "PRIME Z490-V", | |
| "PRIME Z490M-PLUS", | |
| "PRO B460M-C", | |
| "PRO H410M-C", | |
| "PRO H410T", | |
| "PRO Q470M-C", | |
| "Pro A520M-C", | |
| "Pro A520M-C II", | |
| "Pro B550M-C", | |
| "Pro WS W480-ACE", | |
| "Pro WS X570-ACE", | |
| "ProArt B550-CREATOR", | |
| "ProArt X570-CREATOR WIFI", | |
| "ProArt Z490-CREATOR 10G", | |
| "ROG CROSSHAIR VIII DARK HERO", | |
| "ROG CROSSHAIR VIII EXTREME", | |
| "ROG CROSSHAIR VIII FORMULA", | |
| "ROG CROSSHAIR VIII HERO", | |
| "ROG CROSSHAIR VIII HERO (WI-FI)", | |
| "ROG CROSSHAIR VIII IMPACT", | |
| "ROG MAXIMUS XI APEX", | |
| "ROG MAXIMUS XI CODE", | |
| "ROG MAXIMUS XI EXTREME", | |
| "ROG MAXIMUS XI FORMULA", | |
| "ROG MAXIMUS XI GENE", | |
| "ROG MAXIMUS XI HERO", | |
| "ROG MAXIMUS XI HERO (WI-FI)", | |
| "ROG MAXIMUS XII APEX", | |
| "ROG MAXIMUS XII EXTREME", | |
| "ROG MAXIMUS XII FORMULA", | |
| "ROG MAXIMUS XII HERO (WI-FI)", | |
| "ROG STRIX B360-F GAMING", | |
| "ROG STRIX B360-G GAMING", | |
| "ROG STRIX B360-H GAMING", | |
| "ROG STRIX B360-H GAMING/OPTANE", | |
| "ROG STRIX B360-I GAMING", | |
| "ROG STRIX B460-F GAMING", | |
| "ROG STRIX B460-G GAMING", | |
| "ROG STRIX B460-H GAMING", | |
| "ROG STRIX B460-I GAMING", | |
| "ROG STRIX B550-A GAMING", | |
| "ROG STRIX B550-E GAMING", | |
| "ROG STRIX B550-F GAMING", | |
| "ROG STRIX B550-F GAMING (WI-FI)", | |
| "ROG STRIX B550-F GAMING WIFI II", | |
| "ROG STRIX B550-I GAMING", | |
| "ROG STRIX B550-XE GAMING WIFI", | |
| "ROG STRIX H370-F GAMING", | |
| "ROG STRIX H370-I GAMING", | |
| "ROG STRIX H470-I GAMING", | |
| "ROG STRIX X570-E GAMING", | |
| "ROG STRIX X570-E GAMING WIFI II", | |
| "ROG STRIX X570-F GAMING", | |
| "ROG STRIX X570-I GAMING", | |
| "ROG STRIX Z390-E GAMING", | |
| "ROG STRIX Z390-F GAMING", | |
| "ROG STRIX Z390-H GAMING", | |
| "ROG STRIX Z390-I GAMING", | |
| "ROG STRIX Z490-A GAMING", | |
| "ROG STRIX Z490-E GAMING", | |
| "ROG STRIX Z490-F GAMING", | |
| "ROG STRIX Z490-G GAMING", | |
| "ROG STRIX Z490-G GAMING (WI-FI)", | |
| "ROG STRIX Z490-H GAMING", | |
| "ROG STRIX Z490-I GAMING", | |
| "TUF B360-PLUS GAMING", | |
| "TUF B360-PRO GAMING", | |
| "TUF B360-PRO GAMING (WI-FI)", | |
| "TUF B360M-E GAMING", | |
| "TUF B360M-PLUS GAMING", | |
| "TUF B360M-PLUS GAMING S", | |
| "TUF B360M-PLUS GAMING/BR", | |
| "TUF GAMING A520M-PLUS", | |
| "TUF GAMING A520M-PLUS II", | |
| "TUF GAMING A520M-PLUS WIFI", | |
| "TUF GAMING B460-PLUS", | |
| "TUF GAMING B460-PRO (WI-FI)", | |
| "TUF GAMING B460M-PLUS", | |
| "TUF GAMING B460M-PLUS (WI-FI)", | |
| "TUF GAMING B460M-PRO", | |
| "TUF GAMING B550-PLUS", | |
| "TUF GAMING B550-PLUS (WI-FI)", | |
| "TUF GAMING B550-PLUS WIFI II", | |
| "TUF GAMING B550-PRO", | |
| "TUF GAMING B550M ZAKU (WI-FI)", | |
| "TUF GAMING B550M-E", | |
| "TUF GAMING B550M-E WIFI", | |
| "TUF GAMING B550M-PLUS", | |
| "TUF GAMING B550M-PLUS (WI-FI)", | |
| "TUF GAMING B550M-PLUS WIFI II", | |
| "TUF GAMING H470-PRO", | |
| "TUF GAMING H470-PRO (WI-FI)", | |
| "TUF GAMING X570-PLUS", | |
| "TUF GAMING X570-PLUS (WI-FI)", | |
| "TUF GAMING X570-PLUS_BR", | |
| "TUF GAMING X570-PRO (WI-FI)", | |
| "TUF GAMING X570-PRO WIFI II", | |
| "TUF GAMING Z490-PLUS", | |
| "TUF GAMING Z490-PLUS (WI-FI)", | |
| "TUF H310-PLUS GAMING", | |
| "TUF H310M-PLUS GAMING", | |
| "TUF H310M-PLUS GAMING/BR", | |
| "TUF H370-PRO GAMING", | |
| "TUF H370-PRO GAMING (WI-FI)", | |
| "TUF Z390-PLUS GAMING", | |
| "TUF Z390-PLUS GAMING (WI-FI)", | |
| "TUF Z390-PRO GAMING", | |
| "TUF Z390M-PRO GAMING", | |
| "TUF Z390M-PRO GAMING (WI-FI)", | |
| "W480/SYS", | |
| "WS Z390 PRO", | |
| "Z490-GUNDAM (WI-FI)", | |
| }; | |
| static const char * const asus_msi_boards[] = { | |
| "B560M-P", | |
| "EX-B560M-V5", | |
| "EX-B660M-V5 D4", | |
| "EX-B660M-V5 PRO D4", | |
| "EX-B760M-V5 D4", | |
| "EX-H510M-V3", | |
| "EX-H610M-V3 D4", | |
| "G15CE", | |
| "G15CF", | |
| "PRIME A620M-A", | |
| "PRIME B560-PLUS", | |
| "PRIME B560-PLUS AC-HES", | |
| "PRIME B560M-A", | |
| "PRIME B560M-A AC", | |
| "PRIME B560M-K", | |
| "PRIME B650-PLUS", | |
| "PRIME B650M-A", | |
| "PRIME B650M-A AX", | |
| "PRIME B650M-A AX II", | |
| "PRIME B650M-A II", | |
| "PRIME B650M-A WIFI", | |
| "PRIME B650M-A WIFI II", | |
| "PRIME B660-PLUS D4", | |
| "PRIME B660M-A AC D4", | |
| "PRIME B660M-A D4", | |
| "PRIME B660M-A WIFI D4", | |
| "PRIME B760-PLUS", | |
| "PRIME B760-PLUS D4", | |
| "PRIME B760M-A", | |
| "PRIME B760M-A AX D4", | |
| "PRIME B760M-A D4", | |
| "PRIME B760M-A WIFI", | |
| "PRIME B760M-A WIFI D4", | |
| "PRIME B760M-AJ D4", | |
| "PRIME B760M-K D4", | |
| "PRIME H510M-A", | |
| "PRIME H510M-A WIFI", | |
| "PRIME H510M-D", | |
| "PRIME H510M-E", | |
| "PRIME H510M-F", | |
| "PRIME H510M-K", | |
| "PRIME H510M-R", | |
| "PRIME H510T2/CSM", | |
| "PRIME H570-PLUS", | |
| "PRIME H570M-PLUS", | |
| "PRIME H610I-PLUS D4", | |
| "PRIME H610M-A D4", | |
| "PRIME H610M-A WIFI D4", | |
| "PRIME H610M-D D4", | |
| "PRIME H610M-E D4", | |
| "PRIME H610M-F D4", | |
| "PRIME H610M-K D4", | |
| "PRIME H610M-R D4", | |
| "PRIME H670-PLUS D4", | |
| "PRIME H770-PLUS D4", | |
| "PRIME X670-P", | |
| "PRIME X670-P WIFI", | |
| "PRIME X670E-PRO WIFI", | |
| "PRIME X870-P", | |
| "PRIME X870-P WIFI", | |
| "PRIME Z590-A", | |
| "PRIME Z590-P", | |
| "PRIME Z590-P WIFI", | |
| "PRIME Z590-V", | |
| "PRIME Z590M-PLUS", | |
| "PRIME Z690-A", | |
| "PRIME Z690-P", | |
| "PRIME Z690-P D4", | |
| "PRIME Z690-P WIFI", | |
| "PRIME Z690-P WIFI D4", | |
| "PRIME Z690M-PLUS D4", | |
| "PRIME Z790-A WIFI", | |
| "PRIME Z790-P", | |
| "PRIME Z790-P D4", | |
| "PRIME Z790-P WIFI", | |
| "PRIME Z790-P WIFI D4", | |
| "PRIME Z790M-PLUS", | |
| "PRIME Z790M-PLUS D4", | |
| "Pro B560M-C", | |
| "Pro B560M-CT", | |
| "Pro B660M-C", | |
| "Pro B660M-C D4", | |
| "Pro B760M-C", | |
| "Pro B760M-CT", | |
| "Pro H510M-C", | |
| "Pro H510M-CT", | |
| "Pro H610M-C", | |
| "Pro H610M-C D4", | |
| "Pro H610M-CT D4", | |
| "Pro H610T D4", | |
| "Pro Q670M-C", | |
| "Pro WS 600M-CL", | |
| "Pro WS 665-ACE", | |
| "Pro WS W680-ACE", | |
| "Pro WS W680-ACE IPMI", | |
| "Pro WS W790-ACE", | |
| "Pro WS W790E-SAGE SE", | |
| "Pro WS WRX90E-SAGE SE", | |
| "ProArt B650-CREATOR", | |
| "ProArt B660-CREATOR D4", | |
| "ProArt B760-CREATOR D4", | |
| "ProArt X670E-CREATOR WIFI", | |
| "ProArt X870E-CREATOR WIFI", | |
| "ProArt Z690-CREATOR WIFI", | |
| "ProArt Z790-CREATOR WIFI", | |
| "ROG CROSSHAIR X670E EXTREME", | |
| "ROG CROSSHAIR X670E GENE", | |
| "ROG CROSSHAIR X670E HERO", | |
| "ROG CROSSHAIR X870E APEX", | |
| "ROG CROSSHAIR X870E DARK HERO", | |
| "ROG CROSSHAIR X870E EXTREME", | |
| "ROG CROSSHAIR X870E GLACIAL", | |
| "ROG CROSSHAIR X870E HERO", | |
| "ROG CROSSHAIR X870E HERO BTF", | |
| "ROG MAXIMUS XIII APEX", | |
| "ROG MAXIMUS XIII EXTREME", | |
| "ROG MAXIMUS XIII EXTREME GLACIAL", | |
| "ROG MAXIMUS XIII HERO", | |
| "ROG MAXIMUS Z690 APEX", | |
| "ROG MAXIMUS Z690 EXTREME", | |
| "ROG MAXIMUS Z690 EXTREME GLACIAL", | |
| "ROG MAXIMUS Z690 FORMULA", | |
| "ROG MAXIMUS Z690 HERO", | |
| "ROG MAXIMUS Z690 HERO EVA", | |
| "ROG MAXIMUS Z790 APEX", | |
| "ROG MAXIMUS Z790 EXTREME", | |
| "ROG MAXIMUS Z790 HERO", | |
| "ROG STRIX B560-A GAMING WIFI", | |
| "ROG STRIX B560-E GAMING WIFI", | |
| "ROG STRIX B560-F GAMING WIFI", | |
| "ROG STRIX B560-G GAMING WIFI", | |
| "ROG STRIX B560-I GAMING WIFI", | |
| "ROG STRIX B650-A GAMING WIFI", | |
| "ROG STRIX B650E-E GAMING WIFI", | |
| "ROG STRIX B650E-F GAMING WIFI", | |
| "ROG STRIX B650E-I GAMING WIFI", | |
| "ROG STRIX B660-A GAMING WIFI", | |
| "ROG STRIX B660-A GAMING WIFI D4", | |
| "ROG STRIX B660-F GAMING WIFI", | |
| "ROG STRIX B660-G GAMING WIFI", | |
| "ROG STRIX B660-I GAMING WIFI", | |
| "ROG STRIX B760-A GAMING WIFI", | |
| "ROG STRIX B760-A GAMING WIFI D4", | |
| "ROG STRIX B760-F GAMING WIFI", | |
| "ROG STRIX B760-G GAMING WIFI", | |
| "ROG STRIX B760-G GAMING WIFI D4", | |
| "ROG STRIX B760-I GAMING WIFI", | |
| "ROG STRIX X670E-A GAMING WIFI", | |
| "ROG STRIX X670E-E GAMING WIFI", | |
| "ROG STRIX X670E-F GAMING WIFI", | |
| "ROG STRIX X670E-I GAMING WIFI", | |
| "ROG STRIX X870-A GAMING WIFI", | |
| "ROG STRIX X870-F GAMING WIFI", | |
| "ROG STRIX X870-I GAMING WIFI", | |
| "ROG STRIX X870E-E GAMING WIFI", | |
| "ROG STRIX X870E-E GAMING WIFI7 R2", | |
| "ROG STRIX X870E-H GAMING WIFI7", | |
| "ROG STRIX Z590-A GAMING WIFI", | |
| "ROG STRIX Z590-A GAMING WIFI II", | |
| "ROG STRIX Z590-E GAMING WIFI", | |
| "ROG STRIX Z590-F GAMING WIFI", | |
| "ROG STRIX Z590-I GAMING WIFI", | |
| "ROG STRIX Z690-A GAMING WIFI", | |
| "ROG STRIX Z690-A GAMING WIFI D4", | |
| "ROG STRIX Z690-E GAMING WIFI", | |
| "ROG STRIX Z690-F GAMING WIFI", | |
| "ROG STRIX Z690-G GAMING WIFI", | |
| "ROG STRIX Z690-I GAMING WIFI", | |
| "ROG STRIX Z790-A GAMING WIFI", | |
| "ROG STRIX Z790-A GAMING WIFI D4", | |
| "ROG STRIX Z790-E GAMING WIFI", | |
| "ROG STRIX Z790-F GAMING WIFI", | |
| "ROG STRIX Z790-H GAMING WIFI", | |
| "ROG STRIX Z790-I GAMING WIFI", | |
| "TUF GAMING A620M-PLUS", | |
| "TUF GAMING A620M-PLUS WIFI", | |
| "TUF GAMING B560-PLUS WIFI", | |
| "TUF GAMING B560M-E", | |
| "TUF GAMING B560M-PLUS", | |
| "TUF GAMING B560M-PLUS WIFI", | |
| "TUF GAMING B650-PLUS", | |
| "TUF GAMING B650-PLUS WIFI", | |
| "TUF GAMING B650M-PLUS", | |
| "TUF GAMING B650M-PLUS WIFI", | |
| "TUF GAMING B660-PLUS WIFI D4", | |
| "TUF GAMING B660M-E D4", | |
| "TUF GAMING B660M-PLUS D4", | |
| "TUF GAMING B660M-PLUS WIFI", | |
| "TUF GAMING B660M-PLUS WIFI D4", | |
| "TUF GAMING B760-PLUS WIFI", | |
| "TUF GAMING B760-PLUS WIFI D4", | |
| "TUF GAMING B760M-BTF WIFI D4", | |
| "TUF GAMING B760M-E D4", | |
| "TUF GAMING B760M-PLUS", | |
| "TUF GAMING B760M-PLUS D4", | |
| "TUF GAMING B760M-PLUS WIFI", | |
| "TUF GAMING B760M-PLUS WIFI D4", | |
| "TUF GAMING H570-PRO", | |
| "TUF GAMING H570-PRO WIFI", | |
| "TUF GAMING H670-PRO WIFI D4", | |
| "TUF GAMING H770-PRO WIFI", | |
| "TUF GAMING X670E-PLUS", | |
| "TUF GAMING X670E-PLUS WIFI", | |
| "TUF GAMING X870-PLUS WIFI", | |
| "TUF GAMING X870-PRO WIFI7 W NEO", | |
| "TUF GAMING X870E-PLUS WIFI7", | |
| "TUF GAMING Z590-PLUS", | |
| "TUF GAMING Z590-PLUS WIFI", | |
| "TUF GAMING Z690-PLUS", | |
| "TUF GAMING Z690-PLUS D4", | |
| "TUF GAMING Z690-PLUS WIFI", | |
| "TUF GAMING Z690-PLUS WIFI D4", | |
| "TUF GAMING Z790-PLUS D4", | |
| "TUF GAMING Z790-PLUS WIFI", | |
| "TUF GAMING Z790-PLUS WIFI D4", | |
| "X870 AYW GAMING WIFI W", | |
| "X870 MAX GAMING WIFI7", | |
| "X870 MAX GAMING WIFI7 W", | |
| "Z590 WIFI GUNDAM EDITION", | |
| }; | |
| #if IS_ENABLED(CONFIG_ACPI) | |
| /* | |
| * Callback for acpi_bus_for_each_dev() to find the right device | |
| * by _UID and _HID and return 1 to stop iteration. | |
| */ | |
| static int nct6775_asuswmi_device_match(struct device *dev, void *data) | |
| { | |
| struct acpi_device *adev = to_acpi_device(dev); | |
| if (acpi_dev_hid_uid_match(adev, ASUSWMI_DEVICE_HID, data)) { | |
| asus_acpi_dev = adev; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static enum sensor_access nct6775_determine_access(const char *device_uid) | |
| { | |
| #if IS_ENABLED(CONFIG_ACPI) | |
| u8 tmp; | |
| acpi_bus_for_each_dev(nct6775_asuswmi_device_match, (void *)device_uid); | |
| if (!asus_acpi_dev) | |
| return access_direct; | |
| /* if reading chip id via ACPI succeeds, use WMI "WMBD" method for access */ | |
| if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) { | |
| pr_debug("Using Asus WMBD method of %s to access %#x chip.\n", device_uid, tmp); | |
| return access_asuswmi; | |
| } | |
| #endif | |
| return access_direct; | |
| } | |
| static int __init sensors_nct6775_platform_init(void) | |
| { | |
| int i, err; | |
| bool found = false; | |
| int address; | |
| struct resource res; | |
| struct nct6775_sio_data sio_data; | |
| int sioaddr[2] = { 0x2e, 0x4e }; | |
| enum sensor_access access = access_direct; | |
| const char *board_vendor, *board_name; | |
| err = platform_driver_register(&nct6775_driver); | |
| if (err) | |
| return err; | |
| board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); | |
| board_name = dmi_get_system_info(DMI_BOARD_NAME); | |
| if (board_name && board_vendor && | |
| !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { | |
| err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), | |
| board_name); | |
| if (err >= 0) | |
| access = nct6775_determine_access(ASUSWMI_DEVICE_UID); | |
| err = match_string(asus_msi_boards, ARRAY_SIZE(asus_msi_boards), | |
| board_name); | |
| if (err >= 0) | |
| access = nct6775_determine_access(ASUSMSI_DEVICE_UID); | |
| } | |
| /* | |
| * initialize sio_data->kind and sio_data->sioreg. | |
| * | |
| * when Super-I/O functions move to a separate file, the Super-I/O | |
| * driver will probe 0x2e and 0x4e and auto-detect the presence of a | |
| * nct6775 hardware monitor, and call probe() | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(pdev); i++) { | |
| sio_data.sio_outb = superio_outb; | |
| sio_data.sio_inb = superio_inb; | |
| sio_data.sio_select = superio_select; | |
| sio_data.sio_enter = superio_enter; | |
| sio_data.sio_exit = superio_exit; | |
| address = nct6775_find(sioaddr[i], &sio_data); | |
| if (address <= 0) | |
| continue; | |
| found = true; | |
| sio_data.access = access; | |
| if (access == access_asuswmi) { | |
| sio_data.sio_outb = superio_wmi_outb; | |
| sio_data.sio_inb = superio_wmi_inb; | |
| sio_data.sio_select = superio_wmi_select; | |
| sio_data.sio_enter = superio_wmi_enter; | |
| sio_data.sio_exit = superio_wmi_exit; | |
| } | |
| pdev[i] = platform_device_alloc(DRVNAME, address); | |
| if (!pdev[i]) { | |
| err = -ENOMEM; | |
| goto exit_device_unregister; | |
| } | |
| err = platform_device_add_data(pdev[i], &sio_data, | |
| sizeof(struct nct6775_sio_data)); | |
| if (err) | |
| goto exit_device_put; | |
| if (sio_data.access == access_direct) { | |
| memset(&res, 0, sizeof(res)); | |
| res.name = DRVNAME; | |
| res.start = address + IOREGION_OFFSET; | |
| res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; | |
| res.flags = IORESOURCE_IO; | |
| err = acpi_check_resource_conflict(&res); | |
| if (err) { | |
| platform_device_put(pdev[i]); | |
| pdev[i] = NULL; | |
| continue; | |
| } | |
| err = platform_device_add_resources(pdev[i], &res, 1); | |
| if (err) | |
| goto exit_device_put; | |
| } | |
| /* platform_device_add calls probe() */ | |
| err = platform_device_add(pdev[i]); | |
| if (err) | |
| goto exit_device_put; | |
| } | |
| if (!found) { | |
| err = -ENODEV; | |
| goto exit_unregister; | |
| } | |
| return 0; | |
| exit_device_put: | |
| platform_device_put(pdev[i]); | |
| exit_device_unregister: | |
| while (i--) | |
| platform_device_unregister(pdev[i]); | |
| exit_unregister: | |
| platform_driver_unregister(&nct6775_driver); | |
| return err; | |
| } | |
| static void __exit sensors_nct6775_platform_exit(void) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(pdev); i++) | |
| platform_device_unregister(pdev[i]); | |
| platform_driver_unregister(&nct6775_driver); | |
| } | |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); | |
| MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_IMPORT_NS("HWMON_NCT6775"); | |
| module_init(sensors_nct6775_platform_init); | |
| module_exit(sensors_nct6775_platform_exit); |