| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * i5500_temp - Driver for Intel 5500/5520/X58 chipset thermal sensor | |
| * | |
| * Copyright (C) 2012, 2014 Jean Delvare <jdelvare@suse.de> | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/device.h> | |
| #include <linux/pci.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/err.h> | |
| /* Register definitions from datasheet */ | |
| #define REG_TSTHRCATA 0xE2 | |
| #define REG_TSCTRL 0xE8 | |
| #define REG_TSTHRRPEX 0xEB | |
| #define REG_TSTHRLO 0xEC | |
| #define REG_TSTHRHI 0xEE | |
| #define REG_CTHINT 0xF0 | |
| #define REG_TSFSC 0xF3 | |
| #define REG_CTSTS 0xF4 | |
| #define REG_TSTHRRQPI 0xF5 | |
| #define REG_CTCTRL 0xF7 | |
| #define REG_TSTIMER 0xF8 | |
| static int i5500_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, | |
| long *val) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev->parent); | |
| u16 tsthr; | |
| s8 tsfsc; | |
| u8 ctsts; | |
| switch (type) { | |
| case hwmon_temp: | |
| switch (attr) { | |
| /* Sensor resolution : 0.5 degree C */ | |
| case hwmon_temp_input: | |
| pci_read_config_word(pdev, REG_TSTHRHI, &tsthr); | |
| pci_read_config_byte(pdev, REG_TSFSC, &tsfsc); | |
| *val = (tsthr - tsfsc) * 500; | |
| return 0; | |
| case hwmon_temp_max: | |
| pci_read_config_word(pdev, REG_TSTHRHI, &tsthr); | |
| *val = tsthr * 500; | |
| return 0; | |
| case hwmon_temp_max_hyst: | |
| pci_read_config_word(pdev, REG_TSTHRLO, &tsthr); | |
| *val = tsthr * 500; | |
| return 0; | |
| case hwmon_temp_crit: | |
| pci_read_config_word(pdev, REG_TSTHRCATA, &tsthr); | |
| *val = tsthr * 500; | |
| return 0; | |
| case hwmon_temp_max_alarm: | |
| pci_read_config_byte(pdev, REG_CTSTS, &ctsts); | |
| *val = !!(ctsts & BIT(1)); | |
| return 0; | |
| case hwmon_temp_crit_alarm: | |
| pci_read_config_byte(pdev, REG_CTSTS, &ctsts); | |
| *val = !!(ctsts & BIT(0)); | |
| return 0; | |
| default: | |
| break; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| return -EOPNOTSUPP; | |
| } | |
| static const struct hwmon_ops i5500_ops = { | |
| .visible = 0444, | |
| .read = i5500_read, | |
| }; | |
| static const struct hwmon_channel_info * const i5500_info[] = { | |
| HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), | |
| HWMON_CHANNEL_INFO(temp, | |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_CRIT | | |
| HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | |
| ), | |
| NULL | |
| }; | |
| static const struct hwmon_chip_info i5500_chip_info = { | |
| .ops = &i5500_ops, | |
| .info = i5500_info, | |
| }; | |
| static const struct pci_device_id i5500_temp_ids[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3438) }, | |
| { 0 }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, i5500_temp_ids); | |
| static int i5500_temp_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| int err; | |
| struct device *hwmon_dev; | |
| u32 tstimer; | |
| s8 tsfsc; | |
| err = pcim_enable_device(pdev); | |
| if (err) { | |
| dev_err(&pdev->dev, "Failed to enable device\n"); | |
| return err; | |
| } | |
| pci_read_config_byte(pdev, REG_TSFSC, &tsfsc); | |
| pci_read_config_dword(pdev, REG_TSTIMER, &tstimer); | |
| if (tsfsc == 0x7F && tstimer == 0x07D30D40) { | |
| dev_notice(&pdev->dev, "Sensor seems to be disabled\n"); | |
| return -ENODEV; | |
| } | |
| hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "intel5500", NULL, | |
| &i5500_chip_info, NULL); | |
| return PTR_ERR_OR_ZERO(hwmon_dev); | |
| } | |
| static struct pci_driver i5500_temp_driver = { | |
| .name = "i5500_temp", | |
| .id_table = i5500_temp_ids, | |
| .probe = i5500_temp_probe, | |
| }; | |
| module_pci_driver(i5500_temp_driver); | |
| MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); | |
| MODULE_DESCRIPTION("Intel 5500/5520/X58 chipset thermal sensor driver"); | |
| MODULE_LICENSE("GPL"); |