| // SPDX-License-Identifier: MIT | |
| /* | |
| * Copyright © 2022 Intel Corporation | |
| */ | |
| #include "xe_guc.h" | |
| #include <linux/iopoll.h> | |
| #include <drm/drm_managed.h> | |
| #include <generated/xe_wa_oob.h> | |
| #include "abi/guc_actions_abi.h" | |
| #include "abi/guc_errors_abi.h" | |
| #include "abi/guc_klvs_abi.h" | |
| #include "regs/xe_gt_regs.h" | |
| #include "regs/xe_gtt_defs.h" | |
| #include "regs/xe_guc_regs.h" | |
| #include "regs/xe_irq_regs.h" | |
| #include "xe_bo.h" | |
| #include "xe_configfs.h" | |
| #include "xe_device.h" | |
| #include "xe_force_wake.h" | |
| #include "xe_gt.h" | |
| #include "xe_gt_printk.h" | |
| #include "xe_gt_sriov_vf.h" | |
| #include "xe_gt_throttle.h" | |
| #include "xe_gt_sriov_pf_migration.h" | |
| #include "xe_guc_ads.h" | |
| #include "xe_guc_buf.h" | |
| #include "xe_guc_capture.h" | |
| #include "xe_guc_ct.h" | |
| #include "xe_guc_db_mgr.h" | |
| #include "xe_guc_engine_activity.h" | |
| #include "xe_guc_hwconfig.h" | |
| #include "xe_guc_klv_helpers.h" | |
| #include "xe_guc_log.h" | |
| #include "xe_guc_pc.h" | |
| #include "xe_guc_rc.h" | |
| #include "xe_guc_relay.h" | |
| #include "xe_guc_submit.h" | |
| #include "xe_memirq.h" | |
| #include "xe_mmio.h" | |
| #include "xe_platform_types.h" | |
| #include "xe_sleep.h" | |
| #include "xe_sriov.h" | |
| #include "xe_sriov_pf_migration.h" | |
| #include "xe_uc.h" | |
| #include "xe_uc_fw.h" | |
| #include "xe_wa.h" | |
| #include "xe_wopcm.h" | |
| static u32 guc_bo_ggtt_addr(struct xe_guc *guc, | |
| struct xe_bo *bo) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| u32 addr; | |
| /* | |
| * For most BOs, the address on the allocating tile is fine. However for | |
| * some, e.g. G2G CTB, the address on a specific tile is required as it | |
| * might be different for each tile. So, just always ask for the address | |
| * on the target GuC. | |
| */ | |
| addr = __xe_bo_ggtt_addr(bo, gt_to_tile(guc_to_gt(guc))->id); | |
| /* GuC addresses above GUC_GGTT_TOP don't map through the GTT */ | |
| xe_assert(xe, addr >= xe_wopcm_size(guc_to_xe(guc))); | |
| xe_assert(xe, addr < GUC_GGTT_TOP); | |
| xe_assert(xe, xe_bo_size(bo) <= GUC_GGTT_TOP - addr); | |
| return addr; | |
| } | |
| static u32 guc_ctl_debug_flags(struct xe_guc *guc) | |
| { | |
| u32 level = xe_guc_log_get_level(&guc->log); | |
| u32 flags = 0; | |
| if (!GUC_LOG_LEVEL_IS_VERBOSE(level)) | |
| flags |= GUC_LOG_DISABLED; | |
| else | |
| flags |= FIELD_PREP(GUC_LOG_VERBOSITY, GUC_LOG_LEVEL_TO_VERBOSITY(level)); | |
| return flags; | |
| } | |
| static u32 guc_ctl_feature_flags(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| u32 flags = GUC_CTL_ENABLE_LITE_RESTORE; | |
| if (!xe->info.skip_guc_pc) | |
| flags |= GUC_CTL_ENABLE_SLPC; | |
| if (xe_configfs_get_psmi_enabled(to_pci_dev(xe->drm.dev))) | |
| flags |= GUC_CTL_ENABLE_PSMI_LOGGING; | |
| if (xe_guc_using_main_gamctrl_queues(guc)) | |
| flags |= GUC_CTL_MAIN_GAMCTRL_QUEUES; | |
| if (xe_device_is_l2_flush_optimized(xe) && xe_gt_is_media_type(guc_to_gt(guc))) | |
| flags |= GUC_CTL_ENABLE_L2FLUSH_OPT; | |
| /* | |
| * On GuC firmware 70.66 and above, the GUC_FEATURE_KLV_DISABLE_MULTI_QUEUE | |
| * Feature KLV is used instead. | |
| */ | |
| if (!xe_configfs_get_enable_multi_queue(to_pci_dev(xe->drm.dev)) && | |
| !GUC_FIRMWARE_VER_AT_LEAST(guc, 70, 66)) | |
| flags |= GUC_CTL_DISABLE_MULTI_QUEUE; | |
| return flags; | |
| } | |
| static u32 guc_ctl_log_params_flags(struct xe_guc *guc) | |
| { | |
| u32 offset = guc_bo_ggtt_addr(guc, guc->log.bo) >> PAGE_SHIFT; | |
| u32 flags; | |
| #if (((XE_GUC_LOG_CRASH_DUMP_BUFFER_SIZE) % SZ_1M) == 0) | |
| #define LOG_UNIT SZ_1M | |
| #define LOG_FLAG GUC_LOG_LOG_ALLOC_UNITS | |
| #else | |
| #define LOG_UNIT SZ_4K | |
| #define LOG_FLAG 0 | |
| #endif | |
| #if (((XE_GUC_LOG_STATE_CAPTURE_BUFFER_SIZE) % SZ_1M) == 0) | |
| #define CAPTURE_UNIT SZ_1M | |
| #define CAPTURE_FLAG GUC_LOG_CAPTURE_ALLOC_UNITS | |
| #else | |
| #define CAPTURE_UNIT SZ_4K | |
| #define CAPTURE_FLAG 0 | |
| #endif | |
| BUILD_BUG_ON(!XE_GUC_LOG_CRASH_DUMP_BUFFER_SIZE); | |
| BUILD_BUG_ON(!IS_ALIGNED(XE_GUC_LOG_CRASH_DUMP_BUFFER_SIZE, LOG_UNIT)); | |
| BUILD_BUG_ON(!XE_GUC_LOG_EVENT_DATA_BUFFER_SIZE); | |
| BUILD_BUG_ON(!IS_ALIGNED(XE_GUC_LOG_EVENT_DATA_BUFFER_SIZE, LOG_UNIT)); | |
| BUILD_BUG_ON(!XE_GUC_LOG_STATE_CAPTURE_BUFFER_SIZE); | |
| BUILD_BUG_ON(!IS_ALIGNED(XE_GUC_LOG_STATE_CAPTURE_BUFFER_SIZE, CAPTURE_UNIT)); | |
| flags = GUC_LOG_VALID | | |
| GUC_LOG_NOTIFY_ON_HALF_FULL | | |
| CAPTURE_FLAG | | |
| LOG_FLAG | | |
| FIELD_PREP(GUC_LOG_CRASH_DUMP, XE_GUC_LOG_CRASH_DUMP_BUFFER_SIZE / LOG_UNIT - 1) | | |
| FIELD_PREP(GUC_LOG_EVENT_DATA, XE_GUC_LOG_EVENT_DATA_BUFFER_SIZE / LOG_UNIT - 1) | | |
| FIELD_PREP(GUC_LOG_STATE_CAPTURE, XE_GUC_LOG_STATE_CAPTURE_BUFFER_SIZE / | |
| CAPTURE_UNIT - 1) | | |
| FIELD_PREP(GUC_LOG_BUF_ADDR, offset); | |
| #undef LOG_UNIT | |
| #undef LOG_FLAG | |
| #undef CAPTURE_UNIT | |
| #undef CAPTURE_FLAG | |
| return flags; | |
| } | |
| static u32 guc_ctl_ads_flags(struct xe_guc *guc) | |
| { | |
| u32 ads = guc_bo_ggtt_addr(guc, guc->ads.bo) >> PAGE_SHIFT; | |
| u32 flags = FIELD_PREP(GUC_ADS_ADDR, ads); | |
| return flags; | |
| } | |
| static bool needs_wa_dual_queue(struct xe_gt *gt) | |
| { | |
| /* | |
| * The DUAL_QUEUE_WA tells the GuC to not allow concurrent submissions | |
| * on RCS and CCSes with different address spaces, which on DG2 is | |
| * required as a WA for an HW bug. | |
| */ | |
| if (XE_GT_WA(gt, 22011391025)) | |
| return true; | |
| /* | |
| * On newer platforms, the HW has been updated to not allow parallel | |
| * execution of different address spaces, so the RCS/CCS will stall the | |
| * context switch if one of the other RCS/CCSes is busy with a different | |
| * address space. While functionally correct, having a submission | |
| * stalled on the HW limits the GuC ability to shuffle things around and | |
| * can cause complications if the non-stalled submission runs for a long | |
| * time, because the GuC doesn't know that the stalled submission isn't | |
| * actually running and might declare it as hung. Therefore, we enable | |
| * the DUAL_QUEUE_WA on all newer platforms on GTs that have CCS engines | |
| * to move management back to the GuC. | |
| */ | |
| if (CCS_INSTANCES(gt) && GRAPHICS_VERx100(gt_to_xe(gt)) >= 1270) | |
| return true; | |
| return false; | |
| } | |
| static u32 guc_ctl_wa_flags(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 flags = 0; | |
| if (XE_GT_WA(gt, 22012773006)) | |
| flags |= GUC_WA_POLLCS; | |
| if (XE_GT_WA(gt, 14014475959)) | |
| flags |= GUC_WA_HOLD_CCS_SWITCHOUT; | |
| if (needs_wa_dual_queue(gt)) | |
| flags |= GUC_WA_DUAL_QUEUE; | |
| /* | |
| * Wa_22011802037: FIXME - there's more to be done than simply setting | |
| * this flag: make sure each CS is stopped when preparing for GT reset | |
| * and wait for pending MI_FW. | |
| */ | |
| if (GRAPHICS_VERx100(xe) < 1270) | |
| flags |= GUC_WA_PRE_PARSER; | |
| if (XE_GT_WA(gt, 22012727170) || XE_GT_WA(gt, 22012727685)) | |
| flags |= GUC_WA_CONTEXT_ISOLATION; | |
| if (XE_GT_WA(gt, 18020744125) && | |
| !xe_hw_engine_mask_per_class(gt, XE_ENGINE_CLASS_RENDER)) | |
| flags |= GUC_WA_RCS_REGS_IN_CCS_REGS_LIST; | |
| if (XE_GT_WA(gt, 14018913170)) | |
| flags |= GUC_WA_ENABLE_TSC_CHECK_ON_RC6; | |
| if (XE_GT_WA(gt, 16023683509)) | |
| flags |= GUC_WA_SAVE_RESTORE_MCFG_REG_AT_MC6; | |
| return flags; | |
| } | |
| static u32 guc_ctl_devid(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| return (((u32)xe->info.devid) << 16) | xe->info.revid; | |
| } | |
| static void guc_print_params(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 *params = guc->params; | |
| int i; | |
| BUILD_BUG_ON(sizeof(guc->params) != GUC_CTL_MAX_DWORDS * sizeof(u32)); | |
| BUILD_BUG_ON(GUC_CTL_MAX_DWORDS + 2 != SOFT_SCRATCH_COUNT); | |
| for (i = 0; i < GUC_CTL_MAX_DWORDS; i++) | |
| xe_gt_dbg(gt, "GuC param[%2d] = 0x%08x\n", i, params[i]); | |
| } | |
| static void guc_init_params(struct xe_guc *guc) | |
| { | |
| u32 *params = guc->params; | |
| params[GUC_CTL_LOG_PARAMS] = guc_ctl_log_params_flags(guc); | |
| params[GUC_CTL_FEATURE] = 0; | |
| params[GUC_CTL_DEBUG] = guc_ctl_debug_flags(guc); | |
| params[GUC_CTL_ADS] = guc_ctl_ads_flags(guc); | |
| params[GUC_CTL_WA] = 0; | |
| params[GUC_CTL_DEVID] = guc_ctl_devid(guc); | |
| guc_print_params(guc); | |
| } | |
| static void guc_init_params_post_hwconfig(struct xe_guc *guc) | |
| { | |
| u32 *params = guc->params; | |
| params[GUC_CTL_LOG_PARAMS] = guc_ctl_log_params_flags(guc); | |
| params[GUC_CTL_FEATURE] = guc_ctl_feature_flags(guc); | |
| params[GUC_CTL_DEBUG] = guc_ctl_debug_flags(guc); | |
| params[GUC_CTL_ADS] = guc_ctl_ads_flags(guc); | |
| params[GUC_CTL_WA] = guc_ctl_wa_flags(guc); | |
| params[GUC_CTL_DEVID] = guc_ctl_devid(guc); | |
| guc_print_params(guc); | |
| } | |
| /* | |
| * Initialize the GuC parameter block before starting the firmware | |
| * transfer. These parameters are read by the firmware on startup | |
| * and cannot be changed thereafter. | |
| */ | |
| static void guc_write_params(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int i; | |
| xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT); | |
| xe_mmio_write32(>->mmio, SOFT_SCRATCH(0), 0); | |
| for (i = 0; i < GUC_CTL_MAX_DWORDS; i++) | |
| xe_mmio_write32(>->mmio, SOFT_SCRATCH(1 + i), guc->params[i]); | |
| } | |
| static int guc_action_register_g2g_buffer(struct xe_guc *guc, u32 type, u32 dst_tile, u32 dst_dev, | |
| u32 desc_addr, u32 buff_addr, u32 size) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| u32 action[] = { | |
| XE_GUC_ACTION_REGISTER_G2G, | |
| FIELD_PREP(XE_G2G_REGISTER_SIZE, size / SZ_4K - 1) | | |
| FIELD_PREP(XE_G2G_REGISTER_TYPE, type) | | |
| FIELD_PREP(XE_G2G_REGISTER_TILE, dst_tile) | | |
| FIELD_PREP(XE_G2G_REGISTER_DEVICE, dst_dev), | |
| desc_addr, | |
| buff_addr, | |
| }; | |
| xe_assert(xe, (type == XE_G2G_TYPE_IN) || (type == XE_G2G_TYPE_OUT)); | |
| xe_assert(xe, !(size % SZ_4K)); | |
| return xe_guc_ct_send_block(&guc->ct, action, ARRAY_SIZE(action)); | |
| } | |
| static int guc_action_deregister_g2g_buffer(struct xe_guc *guc, u32 type, u32 dst_tile, u32 dst_dev) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| u32 action[] = { | |
| XE_GUC_ACTION_DEREGISTER_G2G, | |
| FIELD_PREP(XE_G2G_DEREGISTER_TYPE, type) | | |
| FIELD_PREP(XE_G2G_DEREGISTER_TILE, dst_tile) | | |
| FIELD_PREP(XE_G2G_DEREGISTER_DEVICE, dst_dev), | |
| }; | |
| xe_assert(xe, (type == XE_G2G_TYPE_IN) || (type == XE_G2G_TYPE_OUT)); | |
| return xe_guc_ct_send_block(&guc->ct, action, ARRAY_SIZE(action)); | |
| } | |
| #define G2G_DEV(gt) (((gt)->info.type == XE_GT_TYPE_MAIN) ? 0 : 1) | |
| #define G2G_BUFFER_SIZE (SZ_4K) | |
| #define G2G_DESC_SIZE (64) | |
| #define G2G_DESC_AREA_SIZE (SZ_4K) | |
| /* | |
| * Generate a unique id for each bi-directional CTB for each pair of | |
| * near and far tiles/devices. The id can then be used as an index into | |
| * a single allocation that is sub-divided into multiple CTBs. | |
| * | |
| * For example, with two devices per tile and two tiles, the table should | |
| * look like: | |
| * Far <tile>.<dev> | |
| * 0.0 0.1 1.0 1.1 | |
| * N 0.0 --/-- 00/01 02/03 04/05 | |
| * e 0.1 01/00 --/-- 06/07 08/09 | |
| * a 1.0 03/02 07/06 --/-- 10/11 | |
| * r 1.1 05/04 09/08 11/10 --/-- | |
| * | |
| * Where each entry is Rx/Tx channel id. | |
| * | |
| * So GuC #3 (tile 1, dev 1) talking to GuC #2 (tile 1, dev 0) would | |
| * be reading from channel #11 and writing to channel #10. Whereas, | |
| * GuC #2 talking to GuC #3 would be read on #10 and write to #11. | |
| */ | |
| static unsigned int g2g_slot(u32 near_tile, u32 near_dev, u32 far_tile, u32 far_dev, | |
| u32 type, u32 max_inst, bool have_dev) | |
| { | |
| u32 near = near_tile, far = far_tile; | |
| u32 idx = 0, x, y, direction; | |
| int i; | |
| if (have_dev) { | |
| near = (near << 1) | near_dev; | |
| far = (far << 1) | far_dev; | |
| } | |
| /* No need to send to one's self */ | |
| if (far == near) | |
| return -1; | |
| if (far > near) { | |
| /* Top right table half */ | |
| x = far; | |
| y = near; | |
| /* T/R is 'forwards' direction */ | |
| direction = type; | |
| } else { | |
| /* Bottom left table half */ | |
| x = near; | |
| y = far; | |
| /* B/L is 'backwards' direction */ | |
| direction = (1 - type); | |
| } | |
| /* Count the rows prior to the target */ | |
| for (i = y; i > 0; i--) | |
| idx += max_inst - i; | |
| /* Count this row up to the target */ | |
| idx += (x - 1 - y); | |
| /* Slots are in Rx/Tx pairs */ | |
| idx *= 2; | |
| /* Pick Rx/Tx direction */ | |
| idx += direction; | |
| return idx; | |
| } | |
| static int guc_g2g_register(struct xe_guc *near_guc, struct xe_gt *far_gt, u32 type, bool have_dev) | |
| { | |
| struct xe_gt *near_gt = guc_to_gt(near_guc); | |
| struct xe_device *xe = gt_to_xe(near_gt); | |
| struct xe_bo *g2g_bo; | |
| u32 near_tile = gt_to_tile(near_gt)->id; | |
| u32 near_dev = G2G_DEV(near_gt); | |
| u32 far_tile = gt_to_tile(far_gt)->id; | |
| u32 far_dev = G2G_DEV(far_gt); | |
| u32 max = xe->info.gt_count; | |
| u32 base, desc, buf; | |
| int slot; | |
| /* G2G is not allowed between different cards */ | |
| xe_assert(xe, xe == gt_to_xe(far_gt)); | |
| g2g_bo = near_guc->g2g.bo; | |
| xe_assert(xe, g2g_bo); | |
| slot = g2g_slot(near_tile, near_dev, far_tile, far_dev, type, max, have_dev); | |
| xe_assert(xe, slot >= 0); | |
| base = guc_bo_ggtt_addr(near_guc, g2g_bo); | |
| desc = base + slot * G2G_DESC_SIZE; | |
| buf = base + G2G_DESC_AREA_SIZE + slot * G2G_BUFFER_SIZE; | |
| xe_assert(xe, (desc - base + G2G_DESC_SIZE) <= G2G_DESC_AREA_SIZE); | |
| xe_assert(xe, (buf - base + G2G_BUFFER_SIZE) <= xe_bo_size(g2g_bo)); | |
| return guc_action_register_g2g_buffer(near_guc, type, far_tile, far_dev, | |
| desc, buf, G2G_BUFFER_SIZE); | |
| } | |
| static void guc_g2g_deregister(struct xe_guc *guc, u32 far_tile, u32 far_dev, u32 type) | |
| { | |
| guc_action_deregister_g2g_buffer(guc, type, far_tile, far_dev); | |
| } | |
| static u32 guc_g2g_size(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| unsigned int count = xe->info.gt_count; | |
| u32 num_channels = (count * (count - 1)) / 2; | |
| xe_assert(xe, num_channels * XE_G2G_TYPE_LIMIT * G2G_DESC_SIZE <= G2G_DESC_AREA_SIZE); | |
| return num_channels * XE_G2G_TYPE_LIMIT * G2G_BUFFER_SIZE + G2G_DESC_AREA_SIZE; | |
| } | |
| static bool xe_guc_g2g_wanted(struct xe_device *xe) | |
| { | |
| /* Can't do GuC to GuC communication if there is only one GuC */ | |
| if (xe->info.gt_count <= 1) | |
| return false; | |
| /* No current user */ | |
| return false; | |
| } | |
| static int guc_g2g_alloc(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| struct xe_tile *tile = gt_to_tile(gt); | |
| struct xe_bo *bo; | |
| u32 g2g_size; | |
| if (guc->g2g.bo) | |
| return 0; | |
| if (gt->info.id != 0) { | |
| struct xe_gt *root_gt = xe_device_get_gt(xe, 0); | |
| struct xe_guc *root_guc = &root_gt->uc.guc; | |
| struct xe_bo *bo; | |
| bo = xe_bo_get(root_guc->g2g.bo); | |
| if (!bo) | |
| return -ENODEV; | |
| guc->g2g.bo = bo; | |
| guc->g2g.owned = false; | |
| return 0; | |
| } | |
| g2g_size = guc_g2g_size(guc); | |
| bo = xe_managed_bo_create_pin_map(xe, tile, g2g_size, | |
| XE_BO_FLAG_VRAM_IF_DGFX(tile) | | |
| XE_BO_FLAG_GGTT | | |
| XE_BO_FLAG_GGTT_ALL | | |
| XE_BO_FLAG_GGTT_INVALIDATE | | |
| XE_BO_FLAG_PINNED_NORESTORE); | |
| if (IS_ERR(bo)) | |
| return PTR_ERR(bo); | |
| xe_map_memset(xe, &bo->vmap, 0, 0, g2g_size); | |
| guc->g2g.bo = bo; | |
| guc->g2g.owned = true; | |
| return 0; | |
| } | |
| static void guc_g2g_fini(struct xe_guc *guc) | |
| { | |
| if (!guc->g2g.bo) | |
| return; | |
| /* Unpinning the owned object is handled by generic shutdown */ | |
| if (!guc->g2g.owned) | |
| xe_bo_put(guc->g2g.bo); | |
| guc->g2g.bo = NULL; | |
| } | |
| static int guc_g2g_start(struct xe_guc *guc) | |
| { | |
| struct xe_gt *far_gt, *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| unsigned int i, j; | |
| int t, err; | |
| bool have_dev; | |
| if (!guc->g2g.bo) { | |
| int ret; | |
| ret = guc_g2g_alloc(guc); | |
| if (ret) | |
| return ret; | |
| } | |
| /* GuC interface will need extending if more GT device types are ever created. */ | |
| xe_gt_assert(gt, (gt->info.type == XE_GT_TYPE_MAIN) || (gt->info.type == XE_GT_TYPE_MEDIA)); | |
| /* Channel numbering depends on whether there are multiple GTs per tile */ | |
| have_dev = xe->info.gt_count > xe->info.tile_count; | |
| for_each_gt(far_gt, xe, i) { | |
| u32 far_tile, far_dev; | |
| if (far_gt->info.id == gt->info.id) | |
| continue; | |
| far_tile = gt_to_tile(far_gt)->id; | |
| far_dev = G2G_DEV(far_gt); | |
| for (t = 0; t < XE_G2G_TYPE_LIMIT; t++) { | |
| err = guc_g2g_register(guc, far_gt, t, have_dev); | |
| if (err) { | |
| while (--t >= 0) | |
| guc_g2g_deregister(guc, far_tile, far_dev, t); | |
| goto err_deregister; | |
| } | |
| } | |
| } | |
| return 0; | |
| err_deregister: | |
| for_each_gt(far_gt, xe, j) { | |
| u32 tile, dev; | |
| if (far_gt->info.id == gt->info.id) | |
| continue; | |
| if (j >= i) | |
| break; | |
| tile = gt_to_tile(far_gt)->id; | |
| dev = G2G_DEV(far_gt); | |
| for (t = 0; t < XE_G2G_TYPE_LIMIT; t++) | |
| guc_g2g_deregister(guc, tile, dev, t); | |
| } | |
| return err; | |
| } | |
| static int __guc_opt_in_features_enable(struct xe_guc *guc, u64 addr, u32 num_dwords) | |
| { | |
| u32 action[] = { | |
| XE_GUC_ACTION_OPT_IN_FEATURE_KLV, | |
| lower_32_bits(addr), | |
| upper_32_bits(addr), | |
| num_dwords | |
| }; | |
| return xe_guc_ct_send_block(&guc->ct, action, ARRAY_SIZE(action)); | |
| } | |
| static bool supports_dynamic_ics(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| /* Dynamic ICS is available for PVC and Xe2 and newer platforms. */ | |
| if (xe->info.platform != XE_PVC && GRAPHICS_VER(xe) < 20) | |
| return false; | |
| /* | |
| * The feature is currently not compatible with multi-lrc, so the GuC | |
| * does not support it at all on the media engines (which are the main | |
| * users of mlrc). On the primary GT side, to avoid it being used in | |
| * conjunction with mlrc, we only enable it if we are in single CCS | |
| * mode. | |
| */ | |
| if (xe_gt_is_media_type(gt) || gt->ccs_mode > 1) | |
| return false; | |
| /* | |
| * Dynamic ICS requires GuC v70.40.1, which maps to compatibility | |
| * version v1.18.4. | |
| */ | |
| return GUC_SUBMIT_VER(guc) >= MAKE_GUC_VER(1, 18, 4); | |
| } | |
| #define OPT_IN_MAX_DWORDS 16 | |
| int xe_guc_opt_in_features_enable(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| CLASS(xe_guc_buf, buf)(&guc->buf, OPT_IN_MAX_DWORDS); | |
| u32 count = 0; | |
| u32 *klvs; | |
| int ret; | |
| if (!xe_guc_buf_is_valid(buf)) | |
| return -ENOBUFS; | |
| klvs = xe_guc_buf_cpu_ptr(buf); | |
| /* | |
| * The extra CAT error type opt-in was added in GuC v70.17.0, which maps | |
| * to compatibility version v1.7.0. | |
| * Note that the GuC allows enabling this KLV even on platforms that do | |
| * not support the extra type; in such case the returned type variable | |
| * will be set to a known invalid value which we can check against. | |
| */ | |
| if (GUC_SUBMIT_VER(guc) >= MAKE_GUC_VER(1, 7, 0)) | |
| klvs[count++] = PREP_GUC_KLV_TAG(OPT_IN_FEATURE_EXT_CAT_ERR_TYPE); | |
| /* | |
| * The uncorrectable local error notification opt-in was added in | |
| * GuC v70.38.0, which maps to compatibility version v1.18.0. | |
| */ | |
| if (GUC_SUBMIT_VER(guc) >= MAKE_GUC_VER(1, 18, 0) && | |
| guc_to_gt(guc)->info.has_uncorrectable_error_reporting) | |
| klvs[count++] = | |
| PREP_GUC_KLV_TAG(OPT_IN_FEATURE_UNCORRECTABLE_LOCAL_ERROR_NOTIFICATION); | |
| if (supports_dynamic_ics(guc)) | |
| klvs[count++] = PREP_GUC_KLV_TAG(OPT_IN_FEATURE_DYNAMIC_INHIBIT_CONTEXT_SWITCH); | |
| if (count) { | |
| xe_assert(xe, count <= OPT_IN_MAX_DWORDS); | |
| ret = __guc_opt_in_features_enable(guc, xe_guc_buf_flush(buf), count); | |
| if (ret < 0) { | |
| xe_gt_err(guc_to_gt(guc), | |
| "failed to enable GuC opt-in features: %pe\n", | |
| ERR_PTR(ret)); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void guc_fini_hw(void *arg) | |
| { | |
| struct xe_guc *guc = arg; | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| xe_with_force_wake(fw_ref, gt_to_fw(gt), XE_FORCEWAKE_ALL) | |
| xe_uc_sanitize_reset(&guc_to_gt(guc)->uc); | |
| guc_g2g_fini(guc); | |
| } | |
| static void vf_guc_fini_hw(void *arg) | |
| { | |
| struct xe_guc *guc = arg; | |
| xe_gt_sriov_vf_reset(guc_to_gt(guc)); | |
| } | |
| /** | |
| * xe_guc_comm_init_early - early initialization of GuC communication | |
| * @guc: the &xe_guc to initialize | |
| * | |
| * Must be called prior to first MMIO communication with GuC firmware. | |
| */ | |
| void xe_guc_comm_init_early(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| if (xe_gt_is_media_type(gt)) | |
| guc->notify_reg = MED_GUC_HOST_INTERRUPT; | |
| else | |
| guc->notify_reg = GUC_HOST_INTERRUPT; | |
| } | |
| static int xe_guc_realloc_post_hwconfig(struct xe_guc *guc) | |
| { | |
| struct xe_tile *tile = gt_to_tile(guc_to_gt(guc)); | |
| struct xe_device *xe = guc_to_xe(guc); | |
| int ret; | |
| if (!IS_DGFX(guc_to_xe(guc))) | |
| return 0; | |
| ret = xe_managed_bo_reinit_in_vram(xe, tile, &guc->fw.bo); | |
| if (ret) | |
| return ret; | |
| ret = xe_managed_bo_reinit_in_vram(xe, tile, &guc->log.bo); | |
| if (ret) | |
| return ret; | |
| ret = xe_managed_bo_reinit_in_vram(xe, tile, &guc->ads.bo); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static int vf_guc_init_noalloc(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int err; | |
| err = xe_gt_sriov_vf_bootstrap(gt); | |
| if (err) | |
| return err; | |
| err = xe_gt_sriov_vf_query_config(gt); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| int xe_guc_init_noalloc(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int ret; | |
| xe_guc_comm_init_early(guc); | |
| ret = xe_guc_ct_init_noalloc(&guc->ct); | |
| if (ret) | |
| goto out; | |
| ret = xe_guc_relay_init(&guc->relay); | |
| if (ret) | |
| goto out; | |
| if (IS_SRIOV_VF(xe)) { | |
| ret = vf_guc_init_noalloc(guc); | |
| if (ret) | |
| goto out; | |
| } | |
| return 0; | |
| out: | |
| xe_gt_err(gt, "GuC init failed with %pe\n", ERR_PTR(ret)); | |
| return ret; | |
| } | |
| int xe_guc_init(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int ret; | |
| guc->fw.type = XE_UC_FW_TYPE_GUC; | |
| ret = xe_uc_fw_init(&guc->fw); | |
| if (ret) | |
| return ret; | |
| if (!xe_uc_fw_is_enabled(&guc->fw)) | |
| return 0; | |
| /* Disable page reclaim if GuC FW does not support */ | |
| if (GUC_SUBMIT_VER(guc) < MAKE_GUC_VER(1, 14, 0)) | |
| xe->info.has_page_reclaim_hw_assist = false; | |
| /* Disable indirect_ring_state if missing GuC 70.53+ WA 14025515070. */ | |
| if (gt->info.has_indirect_ring_state && | |
| XE_GT_WA(gt, 14025515070) && | |
| GUC_SUBMIT_VER(guc) < MAKE_GUC_VER(1, 26, 0)) { | |
| gt->info.has_indirect_ring_state = 0; | |
| xe_gt_notice(gt, "indirect ring state requires WA in GuC submit ver 1.26+\n"); | |
| } | |
| if (IS_SRIOV_VF(xe)) { | |
| ret = devm_add_action_or_reset(xe->drm.dev, vf_guc_fini_hw, guc); | |
| if (ret) | |
| goto out; | |
| ret = xe_guc_ct_init(&guc->ct); | |
| if (ret) | |
| goto out; | |
| return 0; | |
| } | |
| ret = xe_guc_log_init(&guc->log); | |
| if (ret) | |
| goto out; | |
| ret = xe_guc_capture_init(guc); | |
| if (ret) | |
| goto out; | |
| ret = xe_guc_ads_init(&guc->ads); | |
| if (ret) | |
| goto out; | |
| ret = xe_guc_ct_init(&guc->ct); | |
| if (ret) | |
| goto out; | |
| xe_uc_fw_change_status(&guc->fw, XE_UC_FIRMWARE_LOADABLE); | |
| ret = devm_add_action_or_reset(xe->drm.dev, guc_fini_hw, guc); | |
| if (ret) | |
| goto out; | |
| guc_init_params(guc); | |
| return 0; | |
| out: | |
| xe_gt_err(gt, "GuC init failed with %pe\n", ERR_PTR(ret)); | |
| return ret; | |
| } | |
| static int vf_guc_init_post_hwconfig(struct xe_guc *guc) | |
| { | |
| int err; | |
| err = xe_guc_submit_init(guc, xe_gt_sriov_vf_guc_ids(guc_to_gt(guc))); | |
| if (err) | |
| return err; | |
| err = xe_guc_buf_cache_init(&guc->buf); | |
| if (err) | |
| return err; | |
| /* XXX xe_guc_db_mgr_init not needed for now */ | |
| return 0; | |
| } | |
| static u32 guc_additional_cache_size(struct xe_device *xe) | |
| { | |
| if (IS_SRIOV_PF(xe) && xe_sriov_pf_migration_supported(xe)) | |
| return XE_GT_SRIOV_PF_MIGRATION_GUC_DATA_MAX_SIZE; | |
| else | |
| return 0; /* Fallback to default size */ | |
| } | |
| /** | |
| * xe_guc_init_post_hwconfig - initialize GuC post hwconfig load | |
| * @guc: The GuC object | |
| * | |
| * Return: 0 on success, negative error code on error. | |
| */ | |
| int xe_guc_init_post_hwconfig(struct xe_guc *guc) | |
| { | |
| int ret; | |
| if (IS_SRIOV_VF(guc_to_xe(guc))) | |
| return vf_guc_init_post_hwconfig(guc); | |
| ret = xe_guc_realloc_post_hwconfig(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_ct_init_post_hwconfig(&guc->ct); | |
| if (ret) | |
| return ret; | |
| guc_init_params_post_hwconfig(guc); | |
| ret = xe_guc_submit_init(guc, ~0); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_db_mgr_init(&guc->dbm, ~0); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_pc_init(&guc->pc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_rc_init(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_engine_activity_init(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_buf_cache_init_with_size(&guc->buf, | |
| guc_additional_cache_size(guc_to_xe(guc))); | |
| if (ret) | |
| return ret; | |
| return xe_guc_ads_init_post_hwconfig(&guc->ads); | |
| } | |
| int xe_guc_post_load_init(struct xe_guc *guc) | |
| { | |
| int ret; | |
| xe_guc_ads_populate_post_load(&guc->ads); | |
| ret = xe_guc_opt_in_features_enable(guc); | |
| if (ret) | |
| return ret; | |
| if (xe_guc_g2g_wanted(guc_to_xe(guc))) { | |
| ret = guc_g2g_start(guc); | |
| if (ret) | |
| return ret; | |
| } | |
| return xe_guc_submit_enable(guc); | |
| } | |
| /* | |
| * Wa_14025883347: Prevent GuC firmware DMA failures during GuC-only reset by ensuring | |
| * SRAM save/restore operations are complete before reset. | |
| */ | |
| static void guc_prevent_fw_dma_failure_on_reset(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 boot_hash_chk, guc_status, sram_status; | |
| int ret; | |
| guc_status = xe_mmio_read32(>->mmio, GUC_STATUS); | |
| if (guc_status & GS_MIA_IN_RESET) | |
| return; | |
| boot_hash_chk = xe_mmio_read32(>->mmio, BOOT_HASH_CHK); | |
| if (!(boot_hash_chk & GUC_BOOT_UKERNEL_VALID)) | |
| return; | |
| /* Disable idle flow during reset (GuC reset re-enables it automatically) */ | |
| xe_mmio_rmw32(>->mmio, GUC_MAX_IDLE_COUNT, 0, GUC_IDLE_FLOW_DISABLE); | |
| ret = xe_mmio_wait32(>->mmio, GUC_STATUS, GS_UKERNEL_MASK, | |
| FIELD_PREP(GS_UKERNEL_MASK, XE_GUC_LOAD_STATUS_READY), | |
| 100000, &guc_status, false); | |
| if (ret) | |
| xe_gt_warn(gt, "GuC not ready after disabling idle flow (GUC_STATUS: 0x%x)\n", | |
| guc_status); | |
| ret = xe_mmio_wait32(>->mmio, GUC_SRAM_STATUS, GUC_SRAM_HANDLING_MASK, | |
| 0, 5000, &sram_status, false); | |
| if (ret) | |
| xe_gt_warn(gt, "SRAM handling not complete (GUC_SRAM_STATUS: 0x%x)\n", | |
| sram_status); | |
| } | |
| int xe_guc_reset(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_mmio *mmio = >->mmio; | |
| u32 guc_status, gdrst; | |
| int ret; | |
| xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT); | |
| if (IS_SRIOV_VF(gt_to_xe(gt))) | |
| return xe_gt_sriov_vf_bootstrap(gt); | |
| if (XE_GT_WA(gt, 14025883347)) | |
| guc_prevent_fw_dma_failure_on_reset(guc); | |
| xe_mmio_write32(mmio, GDRST, GRDOM_GUC); | |
| ret = xe_mmio_wait32(mmio, GDRST, GRDOM_GUC, 0, 5000, &gdrst, false); | |
| if (ret) { | |
| xe_gt_err(gt, "GuC reset timed out, GDRST=%#x\n", gdrst); | |
| goto err_out; | |
| } | |
| guc_status = xe_mmio_read32(mmio, GUC_STATUS); | |
| if (!(guc_status & GS_MIA_IN_RESET)) { | |
| xe_gt_err(gt, "GuC status: %#x, MIA core expected to be in reset\n", | |
| guc_status); | |
| ret = -EIO; | |
| goto err_out; | |
| } | |
| return 0; | |
| err_out: | |
| return ret; | |
| } | |
| static void guc_prepare_xfer(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_mmio *mmio = >->mmio; | |
| struct xe_device *xe = guc_to_xe(guc); | |
| u32 shim_flags = GUC_ENABLE_READ_CACHE_LOGIC | | |
| GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA | | |
| GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA | | |
| GUC_ENABLE_MIA_CLOCK_GATING; | |
| if (GRAPHICS_VERx100(xe) < 1250) | |
| shim_flags |= GUC_DISABLE_SRAM_INIT_TO_ZEROES | | |
| GUC_ENABLE_MIA_CACHING; | |
| if (GRAPHICS_VER(xe) >= 20 || xe->info.platform == XE_PVC) | |
| shim_flags |= REG_FIELD_PREP(GUC_MOCS_INDEX_MASK, gt->mocs.uc_index); | |
| /* Must program this register before loading the ucode with DMA */ | |
| xe_mmio_write32(mmio, GUC_SHIM_CONTROL, shim_flags); | |
| xe_mmio_write32(mmio, GT_PM_CONFIG, GT_DOORBELL_ENABLE); | |
| /* Make sure GuC receives ARAT interrupts */ | |
| xe_mmio_rmw32(mmio, PMINTRMSK, ARAT_EXPIRED_INTRMSK, 0); | |
| } | |
| /* | |
| * Supporting MMIO & in memory RSA | |
| */ | |
| static int guc_xfer_rsa(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 rsa[UOS_RSA_SCRATCH_COUNT]; | |
| size_t copied; | |
| int i; | |
| if (guc->fw.rsa_size > 256) { | |
| u32 rsa_ggtt_addr = xe_bo_ggtt_addr(guc->fw.bo) + | |
| xe_uc_fw_rsa_offset(&guc->fw); | |
| xe_mmio_write32(>->mmio, UOS_RSA_SCRATCH(0), rsa_ggtt_addr); | |
| return 0; | |
| } | |
| copied = xe_uc_fw_copy_rsa(&guc->fw, rsa, sizeof(rsa)); | |
| if (copied < sizeof(rsa)) | |
| return -ENOMEM; | |
| for (i = 0; i < UOS_RSA_SCRATCH_COUNT; i++) | |
| xe_mmio_write32(>->mmio, UOS_RSA_SCRATCH(i), rsa[i]); | |
| return 0; | |
| } | |
| /* | |
| * Wait for the GuC to start up. | |
| * | |
| * Measurements indicate this should take no more than 20ms (assuming the GT | |
| * clock is at maximum frequency). However, thermal throttling and other issues | |
| * can prevent the clock hitting max and thus making the load take significantly | |
| * longer. Allow up to 3s as a safety margin in normal builds. For | |
| * CONFIG_DRM_XE_DEBUG allow up to 10s to account for slower execution, issues | |
| * in PCODE, driver, fan, etc. | |
| * | |
| * Keep checking the GUC_STATUS every 10ms with a debug message every 100 | |
| * attempts as a "I'm slow, but alive" message. Regardless, if it takes more | |
| * than 200ms, emit a warning. | |
| */ | |
| #if IS_ENABLED(CONFIG_DRM_XE_DEBUG) | |
| #define GUC_LOAD_TIMEOUT_SEC 20 | |
| #else | |
| #define GUC_LOAD_TIMEOUT_SEC 3 | |
| #endif | |
| #define GUC_LOAD_TIME_WARN_MSEC 200 | |
| static void print_load_status_err(struct xe_gt *gt, u32 status) | |
| { | |
| struct xe_mmio *mmio = >->mmio; | |
| u32 ukernel = REG_FIELD_GET(GS_UKERNEL_MASK, status); | |
| u32 bootrom = REG_FIELD_GET(GS_BOOTROM_MASK, status); | |
| xe_gt_err(gt, "load failed: status: Reset = %d, BootROM = 0x%02X, UKernel = 0x%02X, MIA = 0x%02X, Auth = 0x%02X\n", | |
| REG_FIELD_GET(GS_MIA_IN_RESET, status), | |
| bootrom, ukernel, | |
| REG_FIELD_GET(GS_MIA_MASK, status), | |
| REG_FIELD_GET(GS_AUTH_STATUS_MASK, status)); | |
| switch (bootrom) { | |
| case XE_BOOTROM_STATUS_NO_KEY_FOUND: | |
| xe_gt_err(gt, "invalid key requested, header = 0x%08X\n", | |
| xe_mmio_read32(mmio, GUC_HEADER_INFO)); | |
| break; | |
| case XE_BOOTROM_STATUS_RSA_FAILED: | |
| xe_gt_err(gt, "firmware signature verification failed\n"); | |
| break; | |
| case XE_BOOTROM_STATUS_PROD_KEY_CHECK_FAILURE: | |
| xe_gt_err(gt, "firmware production part check failure\n"); | |
| break; | |
| } | |
| switch (ukernel) { | |
| case XE_GUC_LOAD_STATUS_HWCONFIG_START: | |
| xe_gt_err(gt, "still extracting hwconfig table.\n"); | |
| break; | |
| case XE_GUC_LOAD_STATUS_EXCEPTION: | |
| xe_gt_err(gt, "firmware exception. EIP: %#x\n", | |
| xe_mmio_read32(mmio, SOFT_SCRATCH(13))); | |
| break; | |
| case XE_GUC_LOAD_STATUS_INIT_DATA_INVALID: | |
| xe_gt_err(gt, "illegal init/ADS data\n"); | |
| break; | |
| case XE_GUC_LOAD_STATUS_INIT_MMIO_SAVE_RESTORE_INVALID: | |
| xe_gt_err(gt, "illegal register in save/restore workaround list\n"); | |
| break; | |
| case XE_GUC_LOAD_STATUS_KLV_WORKAROUND_INIT_ERROR: | |
| xe_gt_err(gt, "illegal workaround KLV data\n"); | |
| break; | |
| case XE_GUC_LOAD_STATUS_INVALID_FTR_FLAG: | |
| xe_gt_err(gt, "illegal feature flag specified\n"); | |
| break; | |
| } | |
| } | |
| /* | |
| * Check GUC_STATUS looking for known terminal states (either completion or | |
| * failure) of either the microkernel status field or the boot ROM status field. | |
| * | |
| * Returns 1 for successful completion, -1 for failure and 0 for any | |
| * intermediate state. | |
| */ | |
| static int guc_load_done(struct xe_gt *gt, u32 *status, u32 *tries) | |
| { | |
| u32 ukernel, bootrom; | |
| *status = xe_mmio_read32(>->mmio, GUC_STATUS); | |
| ukernel = REG_FIELD_GET(GS_UKERNEL_MASK, *status); | |
| bootrom = REG_FIELD_GET(GS_BOOTROM_MASK, *status); | |
| switch (ukernel) { | |
| case XE_GUC_LOAD_STATUS_READY: | |
| return 1; | |
| case XE_GUC_LOAD_STATUS_ERROR_DEVID_BUILD_MISMATCH: | |
| case XE_GUC_LOAD_STATUS_GUC_PREPROD_BUILD_MISMATCH: | |
| case XE_GUC_LOAD_STATUS_ERROR_DEVID_INVALID_GUCTYPE: | |
| case XE_GUC_LOAD_STATUS_HWCONFIG_ERROR: | |
| case XE_GUC_LOAD_STATUS_BOOTROM_VERSION_MISMATCH: | |
| case XE_GUC_LOAD_STATUS_DPC_ERROR: | |
| case XE_GUC_LOAD_STATUS_EXCEPTION: | |
| case XE_GUC_LOAD_STATUS_INIT_DATA_INVALID: | |
| case XE_GUC_LOAD_STATUS_MPU_DATA_INVALID: | |
| case XE_GUC_LOAD_STATUS_INIT_MMIO_SAVE_RESTORE_INVALID: | |
| case XE_GUC_LOAD_STATUS_KLV_WORKAROUND_INIT_ERROR: | |
| case XE_GUC_LOAD_STATUS_INVALID_FTR_FLAG: | |
| return -1; | |
| } | |
| switch (bootrom) { | |
| case XE_BOOTROM_STATUS_NO_KEY_FOUND: | |
| case XE_BOOTROM_STATUS_RSA_FAILED: | |
| case XE_BOOTROM_STATUS_PAVPC_FAILED: | |
| case XE_BOOTROM_STATUS_WOPCM_FAILED: | |
| case XE_BOOTROM_STATUS_LOADLOC_FAILED: | |
| case XE_BOOTROM_STATUS_JUMP_FAILED: | |
| case XE_BOOTROM_STATUS_RC6CTXCONFIG_FAILED: | |
| case XE_BOOTROM_STATUS_MPUMAP_INCORRECT: | |
| case XE_BOOTROM_STATUS_EXCEPTION: | |
| case XE_BOOTROM_STATUS_PROD_KEY_CHECK_FAILURE: | |
| return -1; | |
| } | |
| if (++*tries >= 100) { | |
| struct xe_guc_pc *guc_pc = >->uc.guc.pc; | |
| *tries = 0; | |
| xe_gt_dbg(gt, "GuC load still in progress, freq = %dMHz (req %dMHz), status = 0x%08X [0x%02X/%02X]\n", | |
| xe_guc_pc_get_act_freq(guc_pc), | |
| xe_guc_pc_get_cur_freq_fw(guc_pc), | |
| *status, ukernel, bootrom); | |
| } | |
| return 0; | |
| } | |
| static int guc_wait_ucode(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_guc_pc *guc_pc = >->uc.guc.pc; | |
| u32 before_freq, act_freq, cur_freq; | |
| u32 status = 0, tries = 0; | |
| int load_result, ret; | |
| ktime_t before; | |
| u64 delta_ms; | |
| before_freq = xe_guc_pc_get_act_freq(guc_pc); | |
| before = ktime_get(); | |
| ret = poll_timeout_us(load_result = guc_load_done(gt, &status, &tries), load_result, | |
| 10 * USEC_PER_MSEC, | |
| GUC_LOAD_TIMEOUT_SEC * USEC_PER_SEC, false); | |
| delta_ms = ktime_to_ms(ktime_sub(ktime_get(), before)); | |
| act_freq = xe_guc_pc_get_act_freq(guc_pc); | |
| cur_freq = xe_guc_pc_get_cur_freq_fw(guc_pc); | |
| if (ret || load_result <= 0) { | |
| xe_gt_err(gt, "load failed: status = 0x%08X, time = %lldms, freq = %dMHz (req %dMHz)\n", | |
| status, delta_ms, xe_guc_pc_get_act_freq(guc_pc), | |
| xe_guc_pc_get_cur_freq_fw(guc_pc)); | |
| print_load_status_err(gt, status); | |
| return -EPROTO; | |
| } | |
| if (delta_ms > GUC_LOAD_TIME_WARN_MSEC) { | |
| xe_gt_warn(gt, "GuC load: excessive init time: %lldms! [status = 0x%08X]\n", | |
| delta_ms, status); | |
| xe_gt_warn(gt, "GuC load: excessive init time: [freq = %dMHz (req = %dMHz), before = %dMHz, perf_limit_reasons = 0x%08X]\n", | |
| act_freq, cur_freq, before_freq, | |
| xe_gt_throttle_get_limit_reasons(gt)); | |
| } else { | |
| xe_gt_dbg(gt, "GuC load: init took %lldms, freq = %dMHz (req = %dMHz), before = %dMHz, status = 0x%08X\n", | |
| delta_ms, act_freq, cur_freq, before_freq, status); | |
| } | |
| return 0; | |
| } | |
| ALLOW_ERROR_INJECTION(guc_wait_ucode, ERRNO); | |
| static int __xe_guc_upload(struct xe_guc *guc) | |
| { | |
| int ret; | |
| /* Raise GT freq to speed up HuC/GuC load */ | |
| xe_guc_pc_raise_unslice(&guc->pc); | |
| guc_write_params(guc); | |
| guc_prepare_xfer(guc); | |
| /* | |
| * Note that GuC needs the CSS header plus uKernel code to be copied | |
| * by the DMA engine in one operation, whereas the RSA signature is | |
| * loaded separately, either by copying it to the UOS_RSA_SCRATCH | |
| * register (if key size <= 256) or through a ggtt-pinned vma (if key | |
| * size > 256). The RSA size and therefore the way we provide it to the | |
| * HW is fixed for each platform and hard-coded in the bootrom. | |
| */ | |
| ret = guc_xfer_rsa(guc); | |
| if (ret) | |
| goto out; | |
| /* | |
| * Current uCode expects the code to be loaded at 8k; locations below | |
| * this are used for the stack. | |
| */ | |
| ret = xe_uc_fw_upload(&guc->fw, 0x2000, UOS_MOVE); | |
| if (ret) | |
| goto out; | |
| /* Wait for authentication */ | |
| ret = guc_wait_ucode(guc); | |
| if (ret) | |
| goto out; | |
| xe_uc_fw_change_status(&guc->fw, XE_UC_FIRMWARE_RUNNING); | |
| return 0; | |
| out: | |
| xe_uc_fw_change_status(&guc->fw, XE_UC_FIRMWARE_LOAD_FAIL); | |
| return ret; | |
| } | |
| static int vf_guc_min_load_for_hwconfig(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int ret; | |
| ret = xe_guc_hwconfig_init(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_enable_communication(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_gt_sriov_vf_connect(gt); | |
| if (ret) | |
| goto err_out; | |
| ret = xe_gt_sriov_vf_query_runtime(gt); | |
| if (ret) | |
| goto err_out; | |
| return 0; | |
| err_out: | |
| xe_guc_sanitize(guc); | |
| return ret; | |
| } | |
| /** | |
| * xe_guc_min_load_for_hwconfig - load minimal GuC and read hwconfig table | |
| * @guc: The GuC object | |
| * | |
| * This function uploads a minimal GuC that does not support submissions but | |
| * in a state where the hwconfig table can be read. Next, it reads and parses | |
| * the hwconfig table so it can be used for subsequent steps in the driver load. | |
| * Lastly, it enables CT communication (XXX: this is needed for PFs/VFs only). | |
| * | |
| * Return: 0 on success, negative error code on error. | |
| */ | |
| int xe_guc_min_load_for_hwconfig(struct xe_guc *guc) | |
| { | |
| int ret; | |
| if (IS_SRIOV_VF(guc_to_xe(guc))) | |
| return vf_guc_min_load_for_hwconfig(guc); | |
| xe_guc_ads_populate_minimal(&guc->ads); | |
| xe_guc_pc_init_early(&guc->pc); | |
| ret = __xe_guc_upload(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_hwconfig_init(guc); | |
| if (ret) | |
| return ret; | |
| ret = xe_guc_enable_communication(guc); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| int xe_guc_upload(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| xe_guc_ads_populate(&guc->ads); | |
| if (xe_guc_using_main_gamctrl_queues(guc)) | |
| xe_mmio_write32(>->mmio, MAIN_GAMCTRL_MODE, MAIN_GAMCTRL_QUEUE_SELECT); | |
| return __xe_guc_upload(guc); | |
| } | |
| static void guc_handle_mmio_msg(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 msg; | |
| if (IS_SRIOV_VF(guc_to_xe(guc))) | |
| return; | |
| xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT); | |
| msg = xe_mmio_read32(>->mmio, SOFT_SCRATCH(15)); | |
| msg &= XE_GUC_RECV_MSG_EXCEPTION | | |
| XE_GUC_RECV_MSG_CRASH_DUMP_POSTED; | |
| xe_mmio_write32(>->mmio, SOFT_SCRATCH(15), 0); | |
| if (msg & XE_GUC_RECV_MSG_CRASH_DUMP_POSTED) | |
| xe_gt_err(gt, "Received early GuC crash dump notification!\n"); | |
| if (msg & XE_GUC_RECV_MSG_EXCEPTION) | |
| xe_gt_err(gt, "Received early GuC exception notification!\n"); | |
| } | |
| static void guc_enable_irq(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 events = xe_gt_is_media_type(gt) ? | |
| REG_FIELD_PREP(ENGINE0_MASK, GUC_INTR_GUC2HOST) : | |
| REG_FIELD_PREP(ENGINE1_MASK, GUC_INTR_GUC2HOST); | |
| /* Primary GuC and media GuC share a single enable bit */ | |
| xe_mmio_write32(>->mmio, GUC_SG_INTR_ENABLE, | |
| REG_FIELD_PREP(ENGINE1_MASK, GUC_INTR_GUC2HOST)); | |
| /* | |
| * There are separate mask bits for primary and media GuCs, so use | |
| * a RMW operation to avoid clobbering the other GuC's setting. | |
| */ | |
| xe_mmio_rmw32(>->mmio, GUC_SG_INTR_MASK, events, 0); | |
| } | |
| int xe_guc_enable_communication(struct xe_guc *guc) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| int err; | |
| if (IS_SRIOV_VF(xe) && xe_device_has_memirq(xe)) { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_tile *tile = gt_to_tile(gt); | |
| err = xe_memirq_init_guc(&tile->memirq, guc); | |
| if (err) | |
| return err; | |
| } else { | |
| guc_enable_irq(guc); | |
| } | |
| err = xe_guc_ct_enable(&guc->ct); | |
| if (err) | |
| return err; | |
| guc_handle_mmio_msg(guc); | |
| return 0; | |
| } | |
| /** | |
| * xe_guc_softreset() - Soft reset GuC | |
| * @guc: The GuC object | |
| * | |
| * Send soft reset command to GuC through mmio send. | |
| * | |
| * Return: 0 if success, otherwise error code | |
| */ | |
| int xe_guc_softreset(struct xe_guc *guc) | |
| { | |
| u32 action[] = { | |
| XE_GUC_ACTION_CLIENT_SOFT_RESET, | |
| }; | |
| int ret; | |
| if (!xe_uc_fw_is_running(&guc->fw)) | |
| return 0; | |
| ret = xe_guc_mmio_send(guc, action, ARRAY_SIZE(action)); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| int xe_guc_suspend(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| int ret; | |
| ret = xe_guc_softreset(guc); | |
| if (ret) { | |
| xe_gt_err(gt, "GuC suspend failed: %pe\n", ERR_PTR(ret)); | |
| return ret; | |
| } | |
| xe_guc_sanitize(guc); | |
| return 0; | |
| } | |
| void xe_guc_notify(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| const u32 default_notify_data = 0; | |
| /* | |
| * Both GUC_HOST_INTERRUPT and MED_GUC_HOST_INTERRUPT can pass | |
| * additional payload data to the GuC but this capability is not | |
| * used by the firmware yet. Use default value in the meantime. | |
| */ | |
| xe_mmio_write32(>->mmio, guc->notify_reg, default_notify_data); | |
| } | |
| int xe_guc_auth_huc(struct xe_guc *guc, u32 rsa_addr) | |
| { | |
| u32 action[] = { | |
| XE_GUC_ACTION_AUTHENTICATE_HUC, | |
| rsa_addr | |
| }; | |
| return xe_guc_ct_send_block(&guc->ct, action, ARRAY_SIZE(action)); | |
| } | |
| #define MAX_RETRIES_ON_FLR 2 | |
| #define MIN_SLEEP_MS_ON_FLR 256 | |
| int xe_guc_mmio_send_recv(struct xe_guc *guc, const u32 *request, | |
| u32 len, u32 *response_buf) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_mmio *mmio = >->mmio; | |
| struct xe_reg reply_reg = xe_gt_is_media_type(gt) ? | |
| MED_VF_SW_FLAG(0) : VF_SW_FLAG(0); | |
| const u32 LAST_INDEX = VF_SW_FLAG_COUNT - 1; | |
| unsigned int sleep_period_ms = 1; | |
| unsigned int lost = 0; | |
| u32 header; | |
| int ret; | |
| int i; | |
| BUILD_BUG_ON(VF_SW_FLAG_COUNT != MED_VF_SW_FLAG_COUNT); | |
| xe_assert(xe, len); | |
| xe_assert(xe, len <= VF_SW_FLAG_COUNT); | |
| xe_assert(xe, len <= MED_VF_SW_FLAG_COUNT); | |
| xe_assert(xe, FIELD_GET(GUC_HXG_MSG_0_ORIGIN, request[0]) == | |
| GUC_HXG_ORIGIN_HOST); | |
| xe_assert(xe, FIELD_GET(GUC_HXG_MSG_0_TYPE, request[0]) == | |
| GUC_HXG_TYPE_REQUEST); | |
| retry: | |
| /* Not in critical data-path, just do if else for GT type */ | |
| if (xe_gt_is_media_type(gt)) { | |
| for (i = 0; i < len; ++i) | |
| xe_mmio_write32(mmio, MED_VF_SW_FLAG(i), | |
| request[i]); | |
| xe_mmio_read32(mmio, MED_VF_SW_FLAG(LAST_INDEX)); | |
| } else { | |
| for (i = 0; i < len; ++i) | |
| xe_mmio_write32(mmio, VF_SW_FLAG(i), | |
| request[i]); | |
| xe_mmio_read32(mmio, VF_SW_FLAG(LAST_INDEX)); | |
| } | |
| xe_guc_notify(guc); | |
| ret = xe_mmio_wait32(mmio, reply_reg, GUC_HXG_MSG_0_ORIGIN, | |
| FIELD_PREP(GUC_HXG_MSG_0_ORIGIN, GUC_HXG_ORIGIN_GUC), | |
| 50000, &header, false); | |
| if (ret) { | |
| /* scratch registers might be cleared during FLR, try once more */ | |
| if (!header) { | |
| if (++lost > MAX_RETRIES_ON_FLR) { | |
| xe_gt_err(gt, "GuC mmio request %#x: lost, too many retries %u\n", | |
| request[0], lost); | |
| return -ENOLINK; | |
| } | |
| xe_gt_dbg(gt, "GuC mmio request %#x: lost, trying again\n", request[0]); | |
| xe_sleep_relaxed_ms(MIN_SLEEP_MS_ON_FLR); | |
| goto retry; | |
| } | |
| timeout: | |
| xe_gt_err(gt, "GuC mmio request %#x: no reply %#x\n", | |
| request[0], header); | |
| return ret; | |
| } | |
| if (FIELD_GET(GUC_HXG_MSG_0_TYPE, header) == | |
| GUC_HXG_TYPE_NO_RESPONSE_BUSY) { | |
| /* | |
| * Once we got a BUSY reply we must wait again for the final | |
| * response but this time we can't use ORIGIN mask anymore. | |
| * To spot a right change in the reply, we take advantage that | |
| * response SUCCESS and FAILURE differ only by the single bit | |
| * and all other bits are set and can be used as a new mask. | |
| */ | |
| u32 resp_bits = GUC_HXG_TYPE_RESPONSE_SUCCESS & GUC_HXG_TYPE_RESPONSE_FAILURE; | |
| u32 resp_mask = FIELD_PREP(GUC_HXG_MSG_0_TYPE, resp_bits); | |
| BUILD_BUG_ON(FIELD_MAX(GUC_HXG_MSG_0_TYPE) != GUC_HXG_TYPE_RESPONSE_SUCCESS); | |
| BUILD_BUG_ON((GUC_HXG_TYPE_RESPONSE_SUCCESS ^ GUC_HXG_TYPE_RESPONSE_FAILURE) != 1); | |
| ret = xe_mmio_wait32(mmio, reply_reg, resp_mask, resp_mask, | |
| 2000000, &header, false); | |
| if (unlikely(FIELD_GET(GUC_HXG_MSG_0_ORIGIN, header) != | |
| GUC_HXG_ORIGIN_GUC)) | |
| goto proto; | |
| if (unlikely(ret)) { | |
| if (FIELD_GET(GUC_HXG_MSG_0_TYPE, header) != | |
| GUC_HXG_TYPE_NO_RESPONSE_BUSY) | |
| goto proto; | |
| goto timeout; | |
| } | |
| } | |
| if (FIELD_GET(GUC_HXG_MSG_0_TYPE, header) == | |
| GUC_HXG_TYPE_NO_RESPONSE_RETRY) { | |
| u32 reason = FIELD_GET(GUC_HXG_RETRY_MSG_0_REASON, header); | |
| xe_gt_dbg(gt, "GuC mmio request %#x: retrying, reason %#x\n", | |
| request[0], reason); | |
| xe_sleep_exponential_ms(&sleep_period_ms, 256); | |
| goto retry; | |
| } | |
| if (FIELD_GET(GUC_HXG_MSG_0_TYPE, header) == | |
| GUC_HXG_TYPE_RESPONSE_FAILURE) { | |
| u32 hint = FIELD_GET(GUC_HXG_FAILURE_MSG_0_HINT, header); | |
| u32 error = FIELD_GET(GUC_HXG_FAILURE_MSG_0_ERROR, header); | |
| if (unlikely(error == XE_GUC_RESPONSE_VF_MIGRATED)) { | |
| xe_gt_dbg(gt, "GuC mmio request %#x rejected due to MIGRATION (hint %#x)\n", | |
| request[0], hint); | |
| return -EREMCHG; | |
| } | |
| xe_gt_err(gt, "GuC mmio request %#x: failure %#x hint %#x\n", | |
| request[0], error, hint); | |
| return -ENXIO; | |
| } | |
| if (FIELD_GET(GUC_HXG_MSG_0_TYPE, header) != | |
| GUC_HXG_TYPE_RESPONSE_SUCCESS) { | |
| proto: | |
| xe_gt_err(gt, "GuC mmio request %#x: unexpected reply %#x\n", | |
| request[0], header); | |
| return -EPROTO; | |
| } | |
| /* Just copy entire possible message response */ | |
| if (response_buf) { | |
| response_buf[0] = header; | |
| for (i = 1; i < VF_SW_FLAG_COUNT; i++) { | |
| reply_reg.addr += sizeof(u32); | |
| response_buf[i] = xe_mmio_read32(mmio, reply_reg); | |
| } | |
| } | |
| /* Use data from the GuC response as our return value */ | |
| return FIELD_GET(GUC_HXG_RESPONSE_MSG_0_DATA0, header); | |
| } | |
| ALLOW_ERROR_INJECTION(xe_guc_mmio_send_recv, ERRNO); | |
| int xe_guc_mmio_send(struct xe_guc *guc, const u32 *request, u32 len) | |
| { | |
| return xe_guc_mmio_send_recv(guc, request, len, NULL); | |
| } | |
| static int guc_self_cfg(struct xe_guc *guc, u16 key, u16 len, u64 val) | |
| { | |
| struct xe_device *xe = guc_to_xe(guc); | |
| u32 request[HOST2GUC_SELF_CFG_REQUEST_MSG_LEN] = { | |
| FIELD_PREP(GUC_HXG_MSG_0_ORIGIN, GUC_HXG_ORIGIN_HOST) | | |
| FIELD_PREP(GUC_HXG_MSG_0_TYPE, GUC_HXG_TYPE_REQUEST) | | |
| FIELD_PREP(GUC_HXG_REQUEST_MSG_0_ACTION, | |
| GUC_ACTION_HOST2GUC_SELF_CFG), | |
| FIELD_PREP(HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_KEY, key) | | |
| FIELD_PREP(HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_LEN, len), | |
| FIELD_PREP(HOST2GUC_SELF_CFG_REQUEST_MSG_2_VALUE32, | |
| lower_32_bits(val)), | |
| FIELD_PREP(HOST2GUC_SELF_CFG_REQUEST_MSG_3_VALUE64, | |
| upper_32_bits(val)), | |
| }; | |
| int ret; | |
| xe_assert(xe, len <= 2); | |
| xe_assert(xe, len != 1 || !upper_32_bits(val)); | |
| /* Self config must go over MMIO */ | |
| ret = xe_guc_mmio_send(guc, request, ARRAY_SIZE(request)); | |
| if (unlikely(ret < 0)) | |
| return ret; | |
| if (unlikely(ret > 1)) | |
| return -EPROTO; | |
| if (unlikely(!ret)) | |
| return -ENOKEY; | |
| return 0; | |
| } | |
| int xe_guc_self_cfg32(struct xe_guc *guc, u16 key, u32 val) | |
| { | |
| return guc_self_cfg(guc, key, 1, val); | |
| } | |
| int xe_guc_self_cfg64(struct xe_guc *guc, u16 key, u64 val) | |
| { | |
| return guc_self_cfg(guc, key, 2, val); | |
| } | |
| static void xe_guc_sw_0_irq_handler(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| if (IS_SRIOV_VF(gt_to_xe(gt))) | |
| xe_gt_sriov_vf_migrated_event_handler(gt); | |
| } | |
| void xe_guc_irq_handler(struct xe_guc *guc, const u16 iir) | |
| { | |
| if (iir & GUC_INTR_GUC2HOST) | |
| xe_guc_ct_irq_handler(&guc->ct); | |
| if (iir & GUC_INTR_SW_INT_0) | |
| xe_guc_sw_0_irq_handler(guc); | |
| } | |
| void xe_guc_sanitize(struct xe_guc *guc) | |
| { | |
| xe_uc_fw_sanitize(&guc->fw); | |
| xe_guc_ct_disable(&guc->ct); | |
| xe_guc_submit_disable(guc); | |
| } | |
| int xe_guc_reset_prepare(struct xe_guc *guc) | |
| { | |
| return xe_guc_submit_reset_prepare(guc); | |
| } | |
| void xe_guc_reset_wait(struct xe_guc *guc) | |
| { | |
| xe_guc_submit_reset_wait(guc); | |
| } | |
| void xe_guc_stop_prepare(struct xe_guc *guc) | |
| { | |
| if (!IS_SRIOV_VF(guc_to_xe(guc))) | |
| xe_guc_pc_stop(&guc->pc); | |
| } | |
| void xe_guc_stop(struct xe_guc *guc) | |
| { | |
| xe_guc_ct_stop(&guc->ct); | |
| xe_guc_submit_stop(guc); | |
| } | |
| int xe_guc_start(struct xe_guc *guc) | |
| { | |
| return xe_guc_submit_start(guc); | |
| } | |
| /** | |
| * xe_guc_runtime_suspend() - GuC runtime suspend | |
| * @guc: The GuC object | |
| * | |
| * Stop further runs of submission tasks on given GuC and runtime suspend | |
| * GuC CT. | |
| */ | |
| void xe_guc_runtime_suspend(struct xe_guc *guc) | |
| { | |
| xe_guc_submit_pause(guc); | |
| xe_guc_submit_disable(guc); | |
| xe_guc_ct_runtime_suspend(&guc->ct); | |
| } | |
| /** | |
| * xe_guc_runtime_resume() - GuC runtime resume | |
| * @guc: The GuC object | |
| * | |
| * Runtime resume GuC CT and allow further runs of submission tasks on | |
| * given GuC. | |
| */ | |
| void xe_guc_runtime_resume(struct xe_guc *guc) | |
| { | |
| /* | |
| * Runtime PM flows are not applicable for VFs, so it's safe to | |
| * directly enable IRQ. | |
| */ | |
| guc_enable_irq(guc); | |
| xe_guc_ct_runtime_resume(&guc->ct); | |
| xe_guc_submit_enable(guc); | |
| xe_guc_submit_unpause(guc); | |
| } | |
| int xe_guc_print_info(struct xe_guc *guc, struct drm_printer *p) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| u32 status; | |
| int i; | |
| xe_uc_fw_print(&guc->fw, p); | |
| if (!IS_SRIOV_VF(gt_to_xe(gt))) { | |
| CLASS(xe_force_wake, fw_ref)(gt_to_fw(gt), XE_FW_GT); | |
| if (!fw_ref.domains) | |
| return -EIO; | |
| status = xe_mmio_read32(>->mmio, GUC_STATUS); | |
| drm_printf(p, "\nGuC status 0x%08x:\n", status); | |
| drm_printf(p, "\tBootrom status = 0x%x\n", | |
| REG_FIELD_GET(GS_BOOTROM_MASK, status)); | |
| drm_printf(p, "\tuKernel status = 0x%x\n", | |
| REG_FIELD_GET(GS_UKERNEL_MASK, status)); | |
| drm_printf(p, "\tMIA Core status = 0x%x\n", | |
| REG_FIELD_GET(GS_MIA_MASK, status)); | |
| drm_printf(p, "\tLog level = %d\n", | |
| xe_guc_log_get_level(&guc->log)); | |
| drm_puts(p, "\nScratch registers:\n"); | |
| for (i = 0; i < SOFT_SCRATCH_COUNT; i++) { | |
| drm_printf(p, "\t%2d: \t0x%x\n", | |
| i, xe_mmio_read32(>->mmio, SOFT_SCRATCH(i))); | |
| } | |
| } | |
| drm_puts(p, "\n"); | |
| xe_guc_ct_print(&guc->ct, p, false); | |
| drm_puts(p, "\n"); | |
| xe_guc_submit_print(guc, p); | |
| return 0; | |
| } | |
| /** | |
| * xe_guc_declare_wedged() - Declare GuC wedged | |
| * @guc: the GuC object | |
| * | |
| * Wedge the GuC which stops all submission, saves desired debug state, and | |
| * cleans up anything which could timeout. | |
| */ | |
| void xe_guc_declare_wedged(struct xe_guc *guc) | |
| { | |
| xe_gt_assert(guc_to_gt(guc), guc_to_xe(guc)->wedged.mode); | |
| xe_guc_reset_prepare(guc); | |
| xe_guc_ct_stop(&guc->ct); | |
| xe_guc_submit_wedge(guc); | |
| } | |
| /** | |
| * xe_guc_using_main_gamctrl_queues() - Detect which reporting queues to use. | |
| * @guc: The GuC object | |
| * | |
| * For Xe3p and beyond, we want to program the hardware to use the | |
| * "Main GAMCTRL queue" rather than the legacy queue before we upload | |
| * the GuC firmware. This will allow the GuC to use a new set of | |
| * registers for pagefault handling and avoid some unnecessary | |
| * complications with MCR register range handling. | |
| * | |
| * Return: true if can use new main gamctrl queues. | |
| */ | |
| bool xe_guc_using_main_gamctrl_queues(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| /* | |
| * For Xe3p media gt (35), the GuC and the CS subunits may be still Xe3 | |
| * that lacks the Main GAMCTRL support. Reserved bits from the GMD_ID | |
| * inform the IP version of the subunits. | |
| */ | |
| if (xe_gt_is_media_type(gt) && MEDIA_VER(gt_to_xe(gt)) == 35) { | |
| u32 val = xe_mmio_read32(>->mmio, GMD_ID); | |
| u32 subip = REG_FIELD_GET(GMD_ID_SUBIP_FLAG_MASK, val); | |
| if (!subip) | |
| return true; | |
| xe_gt_WARN(gt, subip != 1, | |
| "GMD_ID has unknown value in the SUBIP_FLAG field - 0x%x\n", | |
| subip); | |
| return false; | |
| } | |
| return GT_VER(gt) >= 35; | |
| } | |
| bool xe_guc_has_paging_engine(struct xe_guc *guc) | |
| { | |
| struct xe_gt *gt = guc_to_gt(guc); | |
| struct xe_device *xe = gt_to_xe(gt); | |
| /* | |
| * On newer platforms the GuC now has a dedicated engine class for the | |
| * special PAGING engine, which is the driver reserved BCS engine used | |
| * for KMD paging/binding operations. GuC requires KMD to refer to this | |
| * using the special PAGING engine class. Note that there is no new hw | |
| * engine here, this is purely a sw view in the GuC itself, which we | |
| * need to respect. | |
| */ | |
| if (IS_SRIOV_VF(xe)) | |
| return xe_gt_sriov_vf_paging_engines(gt); | |
| return xe->info.platform >= XE_NOVALAKE_S && | |
| GUC_FIRMWARE_VER_AT_LEAST(guc, 70, 69, 0); | |
| } | |
| /** | |
| * xe_hwe_guc_logical_instance - Get the GuC-aligned logical instance of a | |
| * hardware engine. | |
| * @hwe: Hardware engine. | |
| * | |
| * For GuC backend usage, we should no longer use the raw logical instance | |
| * directly. This helper must be used to retrieve the logical instance of the | |
| * hardware engine, taking care of any necessary adjustments (such as the GuC | |
| * PAGING engine mapping). This is assumed to be used in conjunction with the | |
| * GuC engine class. | |
| * | |
| * Return: Logical instance, taking into account for stuff like GuC PAGING | |
| * engine mapping. | |
| */ | |
| u16 xe_hwe_guc_logical_instance(struct xe_hw_engine *hwe) | |
| { | |
| struct xe_gt *gt = hwe->gt; | |
| if (xe_guc_has_paging_engine(&hwe->gt->uc.guc) && | |
| xe_gt_is_usm_hwe(gt, hwe)) { | |
| int shift = gt->usm.paging_hwe0->logical_instance; | |
| xe_gt_assert(gt, shift <= hwe->logical_instance); | |
| /* GUC_PAGING_CLASS:guc_logical_instance */ | |
| return hwe->logical_instance - shift; | |
| } | |
| return hwe->logical_instance; | |
| } | |
| #if IS_ENABLED(CONFIG_DRM_XE_KUNIT_TEST) | |
| #include "tests/xe_guc_g2g_test.c" | |
| #endif |