drivers/gpu/drm/xe/xe_ggtt.c

// SPDX-License-Identifier: MIT
/*
 * Copyright © 2021 Intel Corporation
 */

#include "xe_ggtt.h"

#include <kunit/visibility.h>
#include <linux/fault-inject.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/sizes.h>

#include <drm/drm_drv.h>
#include <drm/drm_managed.h>
#include <drm/intel/i915_drm.h>
#include <generated/xe_wa_oob.h>

#include "regs/xe_gt_regs.h"
#include "regs/xe_gtt_defs.h"
#include "regs/xe_regs.h"
#include "xe_assert.h"
#include "xe_bo.h"
#include "xe_gt_printk.h"
#include "xe_gt_types.h"
#include "xe_map.h"
#include "xe_mmio.h"
#include "xe_pat.h"
#include "xe_pm.h"
#include "xe_res_cursor.h"
#include "xe_sriov.h"
#include "xe_tile_printk.h"
#include "xe_tile_sriov_vf.h"
#include "xe_tlb_inval.h"
#include "xe_wa.h"
#include "xe_wopcm.h"

/**
 * DOC: Global Graphics Translation Table (GGTT)
 *
 * Xe GGTT implements the support for a Global Virtual Address space that is used
 * for resources that are accessible to privileged (i.e. kernel-mode) processes,
 * and not tied to a specific user-level process. For example, the Graphics
 * micro-Controller (GuC) and Display Engine (if present) utilize this Global
 * address space.
 *
 * The Global GTT (GGTT) translates from the Global virtual address to a physical
 * address that can be accessed by HW. The GGTT is a flat, single-level table.
 *
 * Xe implements a simplified version of the GGTT specifically managing only a
 * certain range of it that goes from the Write Once Protected Content Memory (WOPCM)
 * Layout to a predefined GUC_GGTT_TOP. This approach avoids complications related to
 * the GuC (Graphics Microcontroller) hardware limitations. The GuC address space
 * is limited on both ends of the GGTT, because the GuC shim HW redirects
 * accesses to those addresses to other HW areas instead of going through the
 * GGTT. On the bottom end, the GuC can't access offsets below the WOPCM size,
 * while on the top side the limit is fixed at GUC_GGTT_TOP. To keep things
 * simple, instead of checking each object to see if they are accessed by GuC or
 * not, we just exclude those areas from the allocator. Additionally, to simplify
 * the driver load, we use the maximum WOPCM size in this logic instead of the
 * programmed one, so we don't need to wait until the actual size to be
 * programmed is determined (which requires FW fetch) before initializing the
 * GGTT. These simplifications might waste space in the GGTT (about 20-25 MBs
 * depending on the platform) but we can live with this. Another benefit of this
 * is the GuC bootrom can't access anything below the WOPCM max size so anything
 * the bootrom needs to access (e.g. a RSA key) needs to be placed in the GGTT
 * above the WOPCM max size. Starting the GGTT allocations above the WOPCM max
 * give us the correct placement for free.
 */

#define XE_GGTT_FLAGS_64K	BIT(0)
#define XE_GGTT_FLAGS_ONLINE	BIT(1)

/**
 * struct xe_ggtt_node - A node in GGTT.
 *
 * This struct is allocated with xe_ggtt_insert_node(,_transform) or xe_ggtt_insert_bo(,_at).
 * It will be deallocated using xe_ggtt_node_remove().
 */
struct xe_ggtt_node {
	/** @ggtt: Back pointer to xe_ggtt where this region will be inserted at */
	struct xe_ggtt *ggtt;
	/** @base: A drm_mm_node */
	struct drm_mm_node base;
	/** @delayed_removal_work: The work struct for the delayed removal */
	struct work_struct delayed_removal_work;
	/** @invalidate_on_remove: If it needs invalidation upon removal */
	bool invalidate_on_remove;
};

/**
 * struct xe_ggtt_pt_ops - GGTT Page table operations
 * Which can vary from platform to platform.
 */
struct xe_ggtt_pt_ops {
	/** @pte_encode_flags: Encode PTE flags for a given BO */
	u64 (*pte_encode_flags)(struct xe_bo *bo, u16 pat_index);

	/** @ggtt_set_pte: Directly write into GGTT's PTE */
	xe_ggtt_set_pte_fn ggtt_set_pte;

	/** @ggtt_get_pte: Directly read from GGTT's PTE */
	u64 (*ggtt_get_pte)(struct xe_ggtt *ggtt, u64 addr);
};

/**
 * struct xe_ggtt - Main GGTT struct
 *
 * In general, each tile can contains its own Global Graphics Translation Table
 * (GGTT) instance.
 */
struct xe_ggtt {
	/** @tile: Back pointer to tile where this GGTT belongs */
	struct xe_tile *tile;
	/** @start: Start offset of GGTT */
	u64 start;
	/** @size: Total usable size of this GGTT */
	u64 size;
	/**
	 * @flags: Flags for this GGTT.
	 * Acceptable flags:
	 *
	 * - %XE_GGTT_FLAGS_64K - if PTE size is 64K. Otherwise, regular is 4K.
	 * - %XE_GGTT_FLAGS_ONLINE - is GGTT online, protected by ggtt->lock
	 *   after init
	 */
	unsigned int flags;
	/** @scratch: Internal object allocation used as a scratch page */
	struct xe_bo *scratch;
	/** @lock: Mutex lock to protect GGTT data */
	struct mutex lock;
	/**
	 * @gsm: The iomem pointer to the actual location of the translation
	 * table located in the GSM for easy PTE manipulation
	 */
	u64 __iomem *gsm;
	/** @pt_ops: Page Table operations per platform */
	const struct xe_ggtt_pt_ops *pt_ops;
	/** @mm: The memory manager used to manage individual GGTT allocations */
	struct drm_mm mm;
	/** @access_count: counts GGTT writes */
	unsigned int access_count;
	/** @wq: Dedicated unordered work queue to process node removals */
	struct workqueue_struct *wq;
};

static u64 xelp_ggtt_pte_flags(struct xe_bo *bo, u16 pat_index)
{
	u64 pte = XE_PAGE_PRESENT;

	if (xe_bo_is_vram(bo) || xe_bo_is_stolen_devmem(bo))
		pte |= XE_GGTT_PTE_DM;

	return pte;
}

static u64 xelpg_ggtt_pte_flags(struct xe_bo *bo, u16 pat_index)
{
	struct xe_device *xe = xe_bo_device(bo);
	u64 pte;

	pte = xelp_ggtt_pte_flags(bo, pat_index);

	xe_assert(xe, pat_index <= 3);

	if (pat_index & BIT(0))
		pte |= XELPG_GGTT_PTE_PAT0;

	if (pat_index & BIT(1))
		pte |= XELPG_GGTT_PTE_PAT1;

	return pte;
}

static unsigned int probe_gsm_size(struct pci_dev *pdev)
{
	u16 gmch_ctl, ggms;

	pci_read_config_word(pdev, SNB_GMCH_CTRL, &gmch_ctl);
	ggms = (gmch_ctl >> BDW_GMCH_GGMS_SHIFT) & BDW_GMCH_GGMS_MASK;
	return ggms ? SZ_1M << ggms : 0;
}

static void ggtt_update_access_counter(struct xe_ggtt *ggtt)
{
	struct xe_tile *tile = ggtt->tile;
	struct xe_gt *affected_gt;
	u32 max_gtt_writes;

	if (tile->primary_gt && XE_GT_WA(tile->primary_gt, 22019338487)) {
		affected_gt = tile->primary_gt;
		max_gtt_writes = 1100;

		/* Only expected to apply to primary GT on dgpu platforms */
		xe_tile_assert(tile, IS_DGFX(tile_to_xe(tile)));
	} else {
		affected_gt = tile->media_gt;
		max_gtt_writes = 63;

		/* Only expected to apply to media GT on igpu platforms */
		xe_tile_assert(tile, !IS_DGFX(tile_to_xe(tile)));
	}

	/*
	 * Wa_22019338487: GMD_ID is a RO register, a dummy write forces gunit
	 * to wait for completion of prior GTT writes before letting this through.
	 * This needs to be done for all GGTT writes originating from the CPU.
	 */
	lockdep_assert_held(&ggtt->lock);

	if ((++ggtt->access_count % max_gtt_writes) == 0) {
		xe_mmio_write32(&affected_gt->mmio, GMD_ID, 0x0);
		ggtt->access_count = 0;
	}
}

/**
 * xe_ggtt_start - Get starting offset of GGTT.
 * @ggtt: &xe_ggtt
 *
 * Returns: Starting offset for this &xe_ggtt.
 */
u64 xe_ggtt_start(struct xe_ggtt *ggtt)
{
	return ggtt->start;
}

/**
 * xe_ggtt_size - Get size of GGTT.
 * @ggtt: &xe_ggtt
 *
 * Returns: Total usable size of this &xe_ggtt.
 */
u64 xe_ggtt_size(struct xe_ggtt *ggtt)
{
	return ggtt->size;
}

static void xe_ggtt_set_pte(struct xe_ggtt *ggtt, u64 addr, u64 pte)
{
	xe_tile_assert(ggtt->tile, !(addr & XE_PTE_MASK));
	xe_tile_assert(ggtt->tile, addr < ggtt->start + ggtt->size);

	writeq(pte, &ggtt->gsm[addr >> XE_PTE_SHIFT]);
}

static void xe_ggtt_set_pte_and_flush(struct xe_ggtt *ggtt, u64 addr, u64 pte)
{
	xe_ggtt_set_pte(ggtt, addr, pte);
	ggtt_update_access_counter(ggtt);
}

static u64 xe_ggtt_get_pte(struct xe_ggtt *ggtt, u64 addr)
{
	xe_tile_assert(ggtt->tile, !(addr & XE_PTE_MASK));
	xe_tile_assert(ggtt->tile, addr < ggtt->start + ggtt->size);

	return readq(&ggtt->gsm[addr >> XE_PTE_SHIFT]);
}

static void xe_ggtt_clear(struct xe_ggtt *ggtt, u64 start, u64 size)
{
	u16 pat_index = xe_cache_pat_idx(tile_to_xe(ggtt->tile), XE_CACHE_WB);
	u64 end = start + size - 1;
	u64 scratch_pte;

	xe_tile_assert(ggtt->tile, start < end);

	if (ggtt->scratch)
		scratch_pte = xe_bo_addr(ggtt->scratch, 0, XE_PAGE_SIZE) |
			      ggtt->pt_ops->pte_encode_flags(ggtt->scratch,
							     pat_index);
	else
		scratch_pte = 0;

	while (start < end) {
		ggtt->pt_ops->ggtt_set_pte(ggtt, start, scratch_pte);
		start += XE_PAGE_SIZE;
	}
}

static void primelockdep(struct xe_ggtt *ggtt)
{
	if (!IS_ENABLED(CONFIG_LOCKDEP))
		return;

	fs_reclaim_acquire(GFP_KERNEL);
	might_lock(&ggtt->lock);
	fs_reclaim_release(GFP_KERNEL);
}

/**
 * xe_ggtt_alloc - Allocate a GGTT for a given &xe_tile
 * @tile: &xe_tile
 *
 * Allocates a &xe_ggtt for a given tile.
 *
 * Return: &xe_ggtt on success, or NULL when out of memory.
 */
struct xe_ggtt *xe_ggtt_alloc(struct xe_tile *tile)
{
	struct xe_device *xe = tile_to_xe(tile);
	struct xe_ggtt *ggtt;

	ggtt = drmm_kzalloc(&xe->drm, sizeof(*ggtt), GFP_KERNEL);
	if (!ggtt)
		return NULL;

	if (drmm_mutex_init(&xe->drm, &ggtt->lock))
		return NULL;

	primelockdep(ggtt);
	ggtt->tile = tile;

	return ggtt;
}

static void ggtt_fini_early(struct drm_device *drm, void *arg)
{
	struct xe_ggtt *ggtt = arg;

	destroy_workqueue(ggtt->wq);
	drm_mm_takedown(&ggtt->mm);
}

static void ggtt_fini(void *arg)
{
	struct xe_ggtt *ggtt = arg;

	ggtt->scratch = NULL;
}

#ifdef CONFIG_LOCKDEP
void xe_ggtt_might_lock(struct xe_ggtt *ggtt)
{
	might_lock(&ggtt->lock);
}
#endif

static const struct xe_ggtt_pt_ops xelp_pt_ops = {
	.pte_encode_flags = xelp_ggtt_pte_flags,
	.ggtt_set_pte = xe_ggtt_set_pte,
	.ggtt_get_pte = xe_ggtt_get_pte,
};

static const struct xe_ggtt_pt_ops xelpg_pt_ops = {
	.pte_encode_flags = xelpg_ggtt_pte_flags,
	.ggtt_set_pte = xe_ggtt_set_pte,
	.ggtt_get_pte = xe_ggtt_get_pte,
};

static const struct xe_ggtt_pt_ops xelpg_pt_wa_ops = {
	.pte_encode_flags = xelpg_ggtt_pte_flags,
	.ggtt_set_pte = xe_ggtt_set_pte_and_flush,
	.ggtt_get_pte = xe_ggtt_get_pte,
};

static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size)
{
	ggtt->start = start;
	ggtt->size = size;
	drm_mm_init(&ggtt->mm, 0, size);
}

int xe_ggtt_init_kunit(struct xe_ggtt *ggtt, u32 start, u32 size)
{
	__xe_ggtt_init_early(ggtt, start, size);
	return 0;
}
EXPORT_SYMBOL_IF_KUNIT(xe_ggtt_init_kunit);

static void dev_fini_ggtt(void *arg)
{
	struct xe_ggtt *ggtt = arg;

	scoped_guard(mutex, &ggtt->lock)
		ggtt->flags &= ~XE_GGTT_FLAGS_ONLINE;
	drain_workqueue(ggtt->wq);
}

/**
 * xe_ggtt_init_early - Early GGTT initialization
 * @ggtt: the &xe_ggtt to be initialized
 *
 * It allows to create new mappings usable by the GuC.
 * Mappings are not usable by the HW engines, as it doesn't have scratch nor
 * initial clear done to it yet. That will happen in the regular, non-early
 * GGTT initialization.
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_init_early(struct xe_ggtt *ggtt)
{
	struct xe_device *xe = tile_to_xe(ggtt->tile);
	struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
	unsigned int gsm_size;
	u64 ggtt_start, wopcm = xe_wopcm_size(xe), ggtt_size;
	int err;

	if (!IS_SRIOV_VF(xe)) {
		if (GRAPHICS_VERx100(xe) >= 1250)
			gsm_size = SZ_8M; /* GGTT is expected to be 4GiB */
		else
			gsm_size = probe_gsm_size(pdev);
		if (gsm_size == 0) {
			xe_tile_err(ggtt->tile, "Hardware reported no preallocated GSM\n");
			return -ENOMEM;
		}
		ggtt_start = wopcm;
		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
	} else {
		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);

		if (ggtt_start < wopcm ||
		    ggtt_start + ggtt_size > GUC_GGTT_TOP) {
			xe_tile_err(ggtt->tile, "Invalid GGTT configuration: %#llx-%#llx\n",
				    ggtt_start, ggtt_start + ggtt_size - 1);
			return -ERANGE;
		}
	}

	ggtt->gsm = ggtt->tile->mmio.regs + SZ_8M;
	if (IS_DGFX(xe) && xe->info.vram_flags & XE_VRAM_FLAGS_NEED64K)
		ggtt->flags |= XE_GGTT_FLAGS_64K;

	if (ggtt_size + ggtt_start > GUC_GGTT_TOP)
		ggtt_size = GUC_GGTT_TOP - ggtt_start;

	if (GRAPHICS_VERx100(xe) >= 1270)
		ggtt->pt_ops =
			(ggtt->tile->media_gt && XE_GT_WA(ggtt->tile->media_gt, 22019338487)) ||
			(ggtt->tile->primary_gt && XE_GT_WA(ggtt->tile->primary_gt, 22019338487)) ?
			&xelpg_pt_wa_ops : &xelpg_pt_ops;
	else
		ggtt->pt_ops = &xelp_pt_ops;

	ggtt->wq = alloc_workqueue("xe-ggtt-wq", WQ_MEM_RECLAIM | WQ_PERCPU, 0);
	if (!ggtt->wq)
		return -ENOMEM;

	__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size);

	err = drmm_add_action_or_reset(&xe->drm, ggtt_fini_early, ggtt);
	if (err)
		return err;

	ggtt->flags |= XE_GGTT_FLAGS_ONLINE;
	return devm_add_action_or_reset(xe->drm.dev, dev_fini_ggtt, ggtt);
}
ALLOW_ERROR_INJECTION(xe_ggtt_init_early, ERRNO); /* See xe_pci_probe() */

static void xe_ggtt_invalidate(struct xe_ggtt *ggtt);

static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
{
	struct drm_mm_node *hole;
	u64 start, end;

	/* Display may have allocated inside ggtt, so be careful with clearing here */
	mutex_lock(&ggtt->lock);
	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);

	xe_ggtt_invalidate(ggtt);
	mutex_unlock(&ggtt->lock);
}

static void ggtt_node_fini(struct xe_ggtt_node *node)
{
	kfree(node);
}

static void ggtt_node_remove(struct xe_ggtt_node *node)
{
	struct xe_ggtt *ggtt = node->ggtt;
	bool bound;

	mutex_lock(&ggtt->lock);
	bound = ggtt->flags & XE_GGTT_FLAGS_ONLINE;
	if (bound)
		xe_ggtt_clear(ggtt, xe_ggtt_node_addr(node), xe_ggtt_node_size(node));
	drm_mm_remove_node(&node->base);
	node->base.size = 0;
	if (bound && node->invalidate_on_remove)
		xe_ggtt_invalidate(ggtt);
	mutex_unlock(&ggtt->lock);

	ggtt_node_fini(node);
}

static void ggtt_node_remove_work_func(struct work_struct *work)
{
	struct xe_ggtt_node *node = container_of(work, typeof(*node),
						 delayed_removal_work);
	struct xe_device *xe = tile_to_xe(node->ggtt->tile);

	guard(xe_pm_runtime)(xe);
	ggtt_node_remove(node);
}

/**
 * xe_ggtt_node_remove - Remove a &xe_ggtt_node from the GGTT
 * @node: the &xe_ggtt_node to be removed
 * @invalidate: if node needs invalidation upon removal
 */
void xe_ggtt_node_remove(struct xe_ggtt_node *node, bool invalidate)
{
	struct xe_ggtt *ggtt;
	struct xe_device *xe;

	if (!node || !node->ggtt)
		return;

	ggtt = node->ggtt;
	xe = tile_to_xe(ggtt->tile);

	node->invalidate_on_remove = invalidate;

	if (xe_pm_runtime_get_if_active(xe)) {
		ggtt_node_remove(node);
		xe_pm_runtime_put(xe);
	} else {
		queue_work(ggtt->wq, &node->delayed_removal_work);
	}
}

/**
 * xe_ggtt_init - Regular non-early GGTT initialization
 * @ggtt: the &xe_ggtt to be initialized
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_init(struct xe_ggtt *ggtt)
{
	struct xe_device *xe = tile_to_xe(ggtt->tile);
	unsigned int flags;
	int err;

	/*
	 * So we don't need to worry about 64K GGTT layout when dealing with
	 * scratch entries, rather keep the scratch page in system memory on
	 * platforms where 64K pages are needed for VRAM.
	 */
	flags = 0;
	if (ggtt->flags & XE_GGTT_FLAGS_64K)
		flags |= XE_BO_FLAG_SYSTEM;
	else
		flags |= XE_BO_FLAG_VRAM_IF_DGFX(ggtt->tile);

	ggtt->scratch = xe_managed_bo_create_pin_map(xe, ggtt->tile, XE_PAGE_SIZE, flags);
	if (IS_ERR(ggtt->scratch)) {
		err = PTR_ERR(ggtt->scratch);
		goto err;
	}

	xe_map_memset(xe, &ggtt->scratch->vmap, 0, 0, xe_bo_size(ggtt->scratch));

	xe_ggtt_initial_clear(ggtt);

	return devm_add_action_or_reset(xe->drm.dev, ggtt_fini, ggtt);
err:
	ggtt->scratch = NULL;
	return err;
}

static void ggtt_invalidate_gt_tlb(struct xe_gt *gt)
{
	int err;

	if (!gt)
		return;

	err = xe_tlb_inval_ggtt(&gt->tlb_inval);
	xe_gt_WARN(gt, err, "Failed to invalidate GGTT (%pe)", ERR_PTR(err));
}

static void xe_ggtt_invalidate(struct xe_ggtt *ggtt)
{
	struct xe_device *xe = tile_to_xe(ggtt->tile);

	/*
	 * XXX: Barrier for GGTT pages. Unsure exactly why this required but
	 * without this LNL is having issues with the GuC reading scratch page
	 * vs. correct GGTT page. Not particularly a hot code path so blindly
	 * do a mmio read here which results in GuC reading correct GGTT page.
	 */
	xe_mmio_read32(xe_root_tile_mmio(xe), VF_CAP_REG);

	/* Each GT in a tile has its own TLB to cache GGTT lookups */
	ggtt_invalidate_gt_tlb(ggtt->tile->primary_gt);
	ggtt_invalidate_gt_tlb(ggtt->tile->media_gt);
}

/**
 * xe_ggtt_shift_nodes() - Shift GGTT nodes to adjust for a change in usable address range.
 * @ggtt: the &xe_ggtt struct instance
 * @new_start: new location of area provisioned for current VF
 *
 * Ensure that all struct &xe_ggtt_node are moved to the @new_start base address
 * by changing the base offset of the GGTT.
 *
 * This function may be called multiple times during recovery, but if
 * @new_start is unchanged from the current base, it's a noop.
 *
 * @new_start should be a value between xe_wopcm_size() and #GUC_GGTT_TOP.
 */
void xe_ggtt_shift_nodes(struct xe_ggtt *ggtt, u64 new_start)
{
	guard(mutex)(&ggtt->lock);

	xe_tile_assert(ggtt->tile, new_start >= xe_wopcm_size(tile_to_xe(ggtt->tile)));
	xe_tile_assert(ggtt->tile, new_start + ggtt->size <= GUC_GGTT_TOP);

	/* pairs with READ_ONCE in xe_ggtt_node_addr() */
	WRITE_ONCE(ggtt->start, new_start);
}

static int xe_ggtt_insert_node_locked(struct xe_ggtt_node *node,
				      u32 size, u32 align, u32 mm_flags)
{
	return drm_mm_insert_node_generic(&node->ggtt->mm, &node->base, size, align, 0,
					  mm_flags);
}

static struct xe_ggtt_node *ggtt_node_init(struct xe_ggtt *ggtt)
{
	struct xe_ggtt_node *node = kzalloc_obj(*node, GFP_NOFS);

	if (!node)
		return ERR_PTR(-ENOMEM);

	INIT_WORK(&node->delayed_removal_work, ggtt_node_remove_work_func);
	node->ggtt = ggtt;

	return node;
}

/**
 * xe_ggtt_insert_node - Insert a &xe_ggtt_node into the GGTT
 * @ggtt: the &xe_ggtt into which the node should be inserted.
 * @size: size of the node
 * @align: alignment constrain of the node
 *
 * Return: &xe_ggtt_node on success or a ERR_PTR on failure.
 */
struct xe_ggtt_node *xe_ggtt_insert_node(struct xe_ggtt *ggtt, u32 size, u32 align)
{
	struct xe_ggtt_node *node;
	int ret;

	node = ggtt_node_init(ggtt);
	if (IS_ERR(node))
		return node;

	guard(mutex)(&ggtt->lock);
	ret = xe_ggtt_insert_node_locked(node, size, align,
					 DRM_MM_INSERT_HIGH);
	if (ret) {
		ggtt_node_fini(node);
		return ERR_PTR(ret);
	}

	return node;
}

/**
 * xe_ggtt_node_pt_size() - Get the size of page table entries needed to map a GGTT node.
 * @node: the &xe_ggtt_node
 *
 * Return: GGTT node page table entries size in bytes.
 */
size_t xe_ggtt_node_pt_size(const struct xe_ggtt_node *node)
{
	if (!node)
		return 0;

	return node->base.size / XE_PAGE_SIZE * sizeof(u64);
}

/**
 * xe_ggtt_map_bo - Map the BO into GGTT
 * @ggtt: the &xe_ggtt where node will be mapped
 * @node: the &xe_ggtt_node where this BO is mapped
 * @bo: the &xe_bo to be mapped
 * @pte: The pte flags to append.
 */
static void xe_ggtt_map_bo(struct xe_ggtt *ggtt, struct xe_ggtt_node *node,
			   struct xe_bo *bo, u64 pte)
{
	u64 start, end;
	struct xe_res_cursor cur;

	if (XE_WARN_ON(!node))
		return;

	start = xe_ggtt_node_addr(node);
	end = start + xe_bo_size(bo);

	if (!xe_bo_is_vram(bo) && !xe_bo_is_stolen(bo)) {
		xe_assert(xe_bo_device(bo), bo->ttm.ttm);

		for (xe_res_first_sg(xe_bo_sg(bo), 0, xe_bo_size(bo), &cur);
		     cur.remaining; xe_res_next(&cur, XE_PAGE_SIZE))
			ggtt->pt_ops->ggtt_set_pte(ggtt, end - cur.remaining,
						   pte | xe_res_dma(&cur));
	} else {
		/* Prepend GPU offset */
		pte |= vram_region_gpu_offset(bo->ttm.resource);

		for (xe_res_first(bo->ttm.resource, 0, xe_bo_size(bo), &cur);
		     cur.remaining; xe_res_next(&cur, XE_PAGE_SIZE))
			ggtt->pt_ops->ggtt_set_pte(ggtt, end - cur.remaining,
						   pte + cur.start);
	}
}

/**
 * xe_ggtt_map_bo_unlocked - Restore a mapping of a BO into GGTT
 * @ggtt: the &xe_ggtt where node will be mapped
 * @bo: the &xe_bo to be mapped
 *
 * This is used to restore a GGTT mapping after suspend.
 */
void xe_ggtt_map_bo_unlocked(struct xe_ggtt *ggtt, struct xe_bo *bo)
{
	u16 cache_mode = bo->flags & XE_BO_FLAG_NEEDS_UC ? XE_CACHE_NONE : XE_CACHE_WB;
	u16 pat_index = xe_cache_pat_idx(tile_to_xe(ggtt->tile), cache_mode);
	u64 pte;

	mutex_lock(&ggtt->lock);
	pte = ggtt->pt_ops->pte_encode_flags(bo, pat_index);
	xe_ggtt_map_bo(ggtt, bo->ggtt_node[ggtt->tile->id], bo, pte);
	mutex_unlock(&ggtt->lock);
}

/**
 * xe_ggtt_insert_node_transform - Insert a newly allocated &xe_ggtt_node into the GGTT
 * @ggtt: the &xe_ggtt where the node will inserted/reserved.
 * @bo: The bo to be transformed
 * @pte_flags: The extra GGTT flags to add to mapping.
 * @size: size of the node
 * @align: required alignment for node
 * @transform: transformation function that will populate the GGTT node, or NULL for linear mapping.
 * @arg: Extra argument to pass to the transformation function.
 *
 * This function allows inserting a GGTT node with a custom transformation function.
 * This is useful for display to allow inserting rotated framebuffers to GGTT.
 *
 * Return: A pointer to %xe_ggtt_node struct on success. An ERR_PTR otherwise.
 */
struct xe_ggtt_node *xe_ggtt_insert_node_transform(struct xe_ggtt *ggtt,
						   struct xe_bo *bo, u64 pte_flags,
						   u64 size, u32 align,
						   xe_ggtt_transform_cb transform, void *arg)
{
	struct xe_ggtt_node *node;
	int ret;

	node = ggtt_node_init(ggtt);
	if (IS_ERR(node))
		return ERR_CAST(node);

	if (mutex_lock_interruptible(&ggtt->lock) < 0) {
		ret = -ERESTARTSYS;
		goto err;
	}

	ret = xe_ggtt_insert_node_locked(node, size, align, 0);
	if (ret)
		goto err_unlock;

	if (transform)
		transform(ggtt, node, pte_flags, ggtt->pt_ops->ggtt_set_pte, arg);
	else
		xe_ggtt_map_bo(ggtt, node, bo, pte_flags);

	mutex_unlock(&ggtt->lock);
	return node;

err_unlock:
	mutex_unlock(&ggtt->lock);
err:
	ggtt_node_fini(node);
	return ERR_PTR(ret);
}

static int __xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
				  u64 start, u64 end, struct drm_exec *exec)
{
	u64 alignment = bo->min_align > 0 ? bo->min_align : XE_PAGE_SIZE;
	u8 tile_id = ggtt->tile->id;
	int err;

	if (xe_bo_is_vram(bo) && ggtt->flags & XE_GGTT_FLAGS_64K)
		alignment = SZ_64K;

	if (XE_WARN_ON(bo->ggtt_node[tile_id])) {
		/* Someone's already inserted this BO in the GGTT */
		xe_tile_assert(ggtt->tile, bo->ggtt_node[tile_id]->base.size == xe_bo_size(bo));
		return 0;
	}

	err = xe_bo_validate(bo, NULL, false, exec);
	if (err)
		return err;

	xe_pm_runtime_get_noresume(tile_to_xe(ggtt->tile));

	bo->ggtt_node[tile_id] = ggtt_node_init(ggtt);
	if (IS_ERR(bo->ggtt_node[tile_id])) {
		err = PTR_ERR(bo->ggtt_node[tile_id]);
		bo->ggtt_node[tile_id] = NULL;
		goto out;
	}

	mutex_lock(&ggtt->lock);
	/*
	 * When inheriting the initial framebuffer, the framebuffer is
	 * physically located at VRAM address 0, and usually at GGTT address 0 too.
	 *
	 * The display code will ask for a GGTT allocation between end of BO and
	 * remainder of GGTT, unaware that the start is reserved by WOPCM.
	 */
	if (start >= ggtt->start)
		start -= ggtt->start;
	else
		start = 0;

	/* Should never happen, but since we handle start, fail graciously for end */
	if (end >= ggtt->start)
		end -= ggtt->start;
	else
		end = 0;

	xe_tile_assert(ggtt->tile, end >= start + xe_bo_size(bo));

	err = drm_mm_insert_node_in_range(&ggtt->mm, &bo->ggtt_node[tile_id]->base,
					  xe_bo_size(bo), alignment, 0, start, end, 0);
	if (err) {
		ggtt_node_fini(bo->ggtt_node[tile_id]);
		bo->ggtt_node[tile_id] = NULL;
	} else {
		u16 cache_mode = bo->flags & XE_BO_FLAG_NEEDS_UC ? XE_CACHE_NONE : XE_CACHE_WB;
		u16 pat_index = xe_cache_pat_idx(tile_to_xe(ggtt->tile), cache_mode);
		u64 pte = ggtt->pt_ops->pte_encode_flags(bo, pat_index);

		xe_ggtt_map_bo(ggtt, bo->ggtt_node[tile_id], bo, pte);
	}
	mutex_unlock(&ggtt->lock);

	if (!err && bo->flags & XE_BO_FLAG_GGTT_INVALIDATE)
		xe_ggtt_invalidate(ggtt);

out:
	xe_pm_runtime_put(tile_to_xe(ggtt->tile));

	return err;
}

/**
 * xe_ggtt_insert_bo_at - Insert BO at a specific GGTT space
 * @ggtt: the &xe_ggtt where bo will be inserted
 * @bo: the &xe_bo to be inserted
 * @start: address where it will be inserted
 * @end: end of the range where it will be inserted
 * @exec: The drm_exec transaction to use for exhaustive eviction.
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
			 u64 start, u64 end, struct drm_exec *exec)
{
	return __xe_ggtt_insert_bo_at(ggtt, bo, start, end, exec);
}

/**
 * xe_ggtt_insert_bo - Insert BO into GGTT
 * @ggtt: the &xe_ggtt where bo will be inserted
 * @bo: the &xe_bo to be inserted
 * @exec: The drm_exec transaction to use for exhaustive eviction.
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_insert_bo(struct xe_ggtt *ggtt, struct xe_bo *bo,
		      struct drm_exec *exec)
{
	return __xe_ggtt_insert_bo_at(ggtt, bo, 0, U64_MAX, exec);
}

/**
 * xe_ggtt_remove_bo - Remove a BO from the GGTT
 * @ggtt: the &xe_ggtt where node will be removed
 * @bo: the &xe_bo to be removed
 */
void xe_ggtt_remove_bo(struct xe_ggtt *ggtt, struct xe_bo *bo)
{
	u8 tile_id = ggtt->tile->id;

	if (XE_WARN_ON(!bo->ggtt_node[tile_id]))
		return;

	/* This BO is not currently in the GGTT */
	xe_tile_assert(ggtt->tile, bo->ggtt_node[tile_id]->base.size == xe_bo_size(bo));

	xe_ggtt_node_remove(bo->ggtt_node[tile_id],
			    bo->flags & XE_BO_FLAG_GGTT_INVALIDATE);
}

/**
 * xe_ggtt_largest_hole - Largest GGTT hole
 * @ggtt: the &xe_ggtt that will be inspected
 * @alignment: minimum alignment
 * @spare: If not NULL: in: desired memory size to be spared / out: Adjusted possible spare
 *
 * Return: size of the largest continuous GGTT region
 */
u64 xe_ggtt_largest_hole(struct xe_ggtt *ggtt, u64 alignment, u64 *spare)
{
	const struct drm_mm *mm = &ggtt->mm;
	const struct drm_mm_node *entry;
	u64 hole_start, hole_end, hole_size;
	u64 max_hole = 0;

	mutex_lock(&ggtt->lock);
	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
		hole_start = max(hole_start, ggtt->start);
		hole_start = ALIGN(hole_start, alignment);
		hole_end = ALIGN_DOWN(hole_end, alignment);
		if (hole_start >= hole_end)
			continue;
		hole_size = hole_end - hole_start;
		if (spare)
			*spare -= min3(*spare, hole_size, max_hole);
		max_hole = max(max_hole, hole_size);
	}

	mutex_unlock(&ggtt->lock);

	return max_hole;
}

#ifdef CONFIG_PCI_IOV
static u64 xe_encode_vfid_pte(u16 vfid)
{
	return FIELD_PREP(GGTT_PTE_VFID, vfid) | XE_PAGE_PRESENT;
}

static void xe_ggtt_assign_locked(const struct xe_ggtt_node *node, u16 vfid)
{
	struct xe_ggtt *ggtt = node->ggtt;
	u64 start = xe_ggtt_node_addr(node);
	u64 size = xe_ggtt_node_size(node);
	u64 end = start + size - 1;
	u64 pte = xe_encode_vfid_pte(vfid);

	lockdep_assert_held(&ggtt->lock);

	while (start < end) {
		ggtt->pt_ops->ggtt_set_pte(ggtt, start, pte);
		start += XE_PAGE_SIZE;
	}

	xe_ggtt_invalidate(ggtt);
}

/**
 * xe_ggtt_assign - assign a GGTT region to the VF
 * @node: the &xe_ggtt_node to update
 * @vfid: the VF identifier
 *
 * This function is used by the PF driver to assign a GGTT region to the VF.
 * In addition to PTE's VFID bits 11:2 also PRESENT bit 0 is set as on some
 * platforms VFs can't modify that either.
 */
void xe_ggtt_assign(const struct xe_ggtt_node *node, u16 vfid)
{
	guard(mutex)(&node->ggtt->lock);
	xe_ggtt_assign_locked(node, vfid);
}

/**
 * xe_ggtt_node_save() - Save a &xe_ggtt_node to a buffer.
 * @node: the &xe_ggtt_node to be saved
 * @dst: destination buffer
 * @size: destination buffer size in bytes
 * @vfid: VF identifier
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_node_save(struct xe_ggtt_node *node, void *dst, size_t size, u16 vfid)
{
	struct xe_ggtt *ggtt;
	u64 start, end;
	u64 *buf = dst;
	u64 pte;

	if (!node)
		return -ENOENT;

	ggtt = node->ggtt;
	guard(mutex)(&ggtt->lock);

	if (xe_ggtt_node_pt_size(node) != size)
		return -EINVAL;

	start = xe_ggtt_node_addr(node);
	end = start + xe_ggtt_node_size(node) - 1;

	while (start < end) {
		pte = ggtt->pt_ops->ggtt_get_pte(ggtt, start);
		if (vfid != u64_get_bits(pte, GGTT_PTE_VFID))
			return -EPERM;

		*buf++ = u64_replace_bits(pte, 0, GGTT_PTE_VFID);
		start += XE_PAGE_SIZE;
	}

	return 0;
}

/**
 * xe_ggtt_node_load() - Load a &xe_ggtt_node from a buffer.
 * @node: the &xe_ggtt_node to be loaded
 * @src: source buffer
 * @size: source buffer size in bytes
 * @vfid: VF identifier
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_node_load(struct xe_ggtt_node *node, const void *src, size_t size, u16 vfid)
{
	u64 vfid_pte = xe_encode_vfid_pte(vfid);
	const u64 *buf = src;
	struct xe_ggtt *ggtt;
	u64 start, end;

	if (!node)
		return -ENOENT;

	ggtt = node->ggtt;
	guard(mutex)(&ggtt->lock);

	if (xe_ggtt_node_pt_size(node) != size)
		return -EINVAL;

	start = xe_ggtt_node_addr(node);
	end = start + xe_ggtt_node_size(node) - 1;

	while (start < end) {
		vfid_pte = u64_replace_bits(*buf++, vfid, GGTT_PTE_VFID);
		ggtt->pt_ops->ggtt_set_pte(ggtt, start, vfid_pte);
		start += XE_PAGE_SIZE;
	}
	xe_ggtt_invalidate(ggtt);

	return 0;
}

#endif

/**
 * xe_ggtt_dump - Dump GGTT for debug
 * @ggtt: the &xe_ggtt to be dumped
 * @p: the &drm_mm_printer helper handle to be used to dump the information
 *
 * Return: 0 on success or a negative error code on failure.
 */
int xe_ggtt_dump(struct xe_ggtt *ggtt, struct drm_printer *p)
{
	int err;

	err = mutex_lock_interruptible(&ggtt->lock);
	if (err)
		return err;

	drm_mm_print(&ggtt->mm, p);
	mutex_unlock(&ggtt->lock);
	return err;
}

/**
 * xe_ggtt_print_holes - Print holes
 * @ggtt: the &xe_ggtt to be inspected
 * @alignment: min alignment
 * @p: the &drm_printer
 *
 * Print GGTT ranges that are available and return total size available.
 *
 * Return: Total available size.
 */
u64 xe_ggtt_print_holes(struct xe_ggtt *ggtt, u64 alignment, struct drm_printer *p)
{
	const struct drm_mm *mm = &ggtt->mm;
	const struct drm_mm_node *entry;
	u64 hole_start, hole_end, hole_size;
	u64 total = 0;
	char buf[10];

	mutex_lock(&ggtt->lock);
	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
		hole_start = max(hole_start, ggtt->start);
		hole_start = ALIGN(hole_start, alignment);
		hole_end = ALIGN_DOWN(hole_end, alignment);
		if (hole_start >= hole_end)
			continue;
		hole_size = hole_end - hole_start;
		total += hole_size;

		string_get_size(hole_size, 1, STRING_UNITS_2, buf, sizeof(buf));
		drm_printf(p, "range:\t%#llx-%#llx\t(%s)\n",
			   hole_start, hole_end - 1, buf);
	}

	mutex_unlock(&ggtt->lock);

	return total;
}

/**
 * xe_ggtt_encode_pte_flags - Get PTE encoding flags for BO
 * @ggtt: &xe_ggtt
 * @bo: &xe_bo
 * @pat_index: The pat_index for the PTE.
 *
 * This function returns the pte_flags for a given BO, without  address.
 * It's used for DPT to fill a GGTT mapped BO with a linear lookup table.
 */
u64 xe_ggtt_encode_pte_flags(struct xe_ggtt *ggtt,
			     struct xe_bo *bo, u16 pat_index)
{
	return ggtt->pt_ops->pte_encode_flags(bo, pat_index);
}

/**
 * xe_ggtt_read_pte - Read a PTE from the GGTT
 * @ggtt: &xe_ggtt
 * @offset: the offset for which the mapping should be read.
 *
 * Used by testcases, and by display reading out an inherited bios FB.
 */
u64 xe_ggtt_read_pte(struct xe_ggtt *ggtt, u64 offset)
{
	return ioread64(ggtt->gsm + (offset / XE_PAGE_SIZE));
}

/**
 * xe_ggtt_node_addr - Get @node offset in GGTT.
 * @node: &xe_ggtt_node
 *
 * Get the GGTT offset for allocated node.
 */
u64 xe_ggtt_node_addr(const struct xe_ggtt_node *node)
{
	/* pairs with WRITE_ONCE in xe_ggtt_shift_nodes() */
	return node->base.start + READ_ONCE(node->ggtt->start);
}

/**
 * xe_ggtt_node_size - Get @node allocation size.
 * @node: &xe_ggtt_node
 *
 * Get the allocated node's size.
 */
u64 xe_ggtt_node_size(const struct xe_ggtt_node *node)
{
	return node->base.size;
}