| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * DRM driver for Sitronix ST7920 LCD displays | |
| * | |
| * Copyright 2025 Iker Pedrosa <ikerpedrosam@gmail.com> | |
| * | |
| */ | |
| #include <linux/bitrev.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/regmap.h> | |
| #include <linux/spi/spi.h> | |
| #include <drm/clients/drm_client_setup.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include <drm/drm_damage_helper.h> | |
| #include <drm/drm_drv.h> | |
| #include <drm/drm_fbdev_shmem.h> | |
| #include <drm/drm_framebuffer.h> | |
| #include <drm/drm_gem_atomic_helper.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include <drm/drm_gem_shmem_helper.h> | |
| #include <drm/drm_plane.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #define DRIVER_NAME "sitronix_st7920" | |
| #define DRIVER_DESC "DRM driver for Sitronix ST7920 LCD displays" | |
| #define DRIVER_MAJOR 1 | |
| #define DRIVER_MINOR 0 | |
| /* Display organization */ | |
| #define ST7920_PITCH 16 | |
| #define ST7920_SCANLINES 64 | |
| #define BYTES_IN_DISPLAY (ST7920_PITCH * ST7920_SCANLINES) | |
| #define BYTES_IN_SEGMENT 2 | |
| #define PIXELS_PER_SEGMENT (BYTES_IN_SEGMENT * 8) | |
| #define ST7920_DEFAULT_WIDTH 128 | |
| #define ST7920_DEFAULT_HEIGHT 64 | |
| /* Sync sequence */ | |
| #define SYNC_BITS 0xF8 | |
| #define RW_HIGH 0x04 | |
| #define RS_HIGH 0x02 | |
| /* Commands */ | |
| #define SET_DISPLAY_ON 0x0C | |
| #define SET_DISPLAY_OFF 0x08 | |
| #define SET_DISPLAY_CLEAR 0x01 | |
| #define SET_BASIC_INSTRUCTION_SET 0x30 | |
| #define SET_EXT_INSTRUCTION_SET 0x34 | |
| #define SET_GRAPHICS_DISPLAY 0x36 | |
| #define SET_GDRAM_ADDRESS 0x80 | |
| #define SET_GDRAM_DATA 0xFF /* Driver internal command */ | |
| /* Masks */ | |
| #define HIGH_DATA_MASK 0xF0 | |
| #define LOW_DATA_MASK 0x0F | |
| #define TOP_VERTICAL_ADDRESS 0x80 | |
| #define BOTTOM_VERTICAL_ADDRESS 0x60 | |
| #define TOP_HORIZONTAL_ADDRESS 0x00 | |
| #define BOTTOM_HORIZONTAL_ADDRESS 0x80 | |
| #define CMD_SIZE 35 | |
| struct spi7920_error { | |
| int errno; | |
| }; | |
| struct st7920_device { | |
| struct drm_device drm; | |
| struct drm_display_mode mode; | |
| struct drm_plane primary_plane; | |
| struct drm_crtc crtc; | |
| struct drm_encoder encoder; | |
| struct drm_connector connector; | |
| struct spi_device *spi; | |
| struct regmap *regmap; | |
| struct gpio_desc *reset_gpio; | |
| u32 height; | |
| u32 width; | |
| }; | |
| struct st7920_plane_state { | |
| struct drm_shadow_plane_state base; | |
| /* Intermediate buffer to convert pixels from XRGB8888 to HW format */ | |
| u8 *buffer; | |
| }; | |
| struct st7920_crtc_state { | |
| struct drm_crtc_state base; | |
| /* Buffer to store pixels in HW format and written to the panel */ | |
| u8 *data_array; | |
| }; | |
| static inline struct st7920_plane_state *to_st7920_plane_state(struct drm_plane_state *state) | |
| { | |
| return container_of(state, struct st7920_plane_state, base.base); | |
| } | |
| static inline struct st7920_crtc_state *to_st7920_crtc_state(struct drm_crtc_state *state) | |
| { | |
| return container_of(state, struct st7920_crtc_state, base); | |
| } | |
| static inline struct st7920_device *drm_to_st7920(struct drm_device *drm) | |
| { | |
| return container_of(drm, struct st7920_device, drm); | |
| } | |
| static int st7920_store_gdram_address(const void *data, u8 *reg) | |
| { | |
| const u8 y_addr = *(const u8 *)data; | |
| bool bottom_screen = (y_addr >= 32); | |
| int i = 0; | |
| reg[i++] = SYNC_BITS; | |
| /* Set vertical address */ | |
| if (!bottom_screen) | |
| reg[i++] = TOP_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK); | |
| else | |
| reg[i++] = BOTTOM_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK); | |
| reg[i++] = *(uint8_t *)data << 4; | |
| /* Set horizontal address */ | |
| reg[i++] = SET_GDRAM_ADDRESS; | |
| if (!bottom_screen) | |
| reg[i++] = TOP_HORIZONTAL_ADDRESS; | |
| else | |
| reg[i++] = BOTTOM_HORIZONTAL_ADDRESS; | |
| return i; | |
| } | |
| static int st7920_store_gdram_data(const void *data, u8 *reg) | |
| { | |
| const u8 *line_data = data; | |
| int i = 0, j = 0; | |
| reg[i++] = SYNC_BITS | RS_HIGH; | |
| for (j = 0; j < 16; j++) { | |
| reg[i++] = line_data[j] & 0xF0; | |
| reg[i++] = (line_data[j] << 4) & 0xF0; | |
| } | |
| return i; | |
| } | |
| static int st7920_store_others(int cmd, const void *data, u8 *reg) | |
| { | |
| int i = 0; | |
| reg[i++] = SYNC_BITS; | |
| reg[i++] = cmd & HIGH_DATA_MASK; | |
| reg[i++] = (cmd & LOW_DATA_MASK) << 4; | |
| return i; | |
| } | |
| static void st7920_spi_write(struct spi_device *spi, int cmd, const void *data, | |
| int delay_us, struct spi7920_error *err) | |
| { | |
| u8 reg[CMD_SIZE] = {0}; | |
| int size = 0; | |
| int ret; | |
| if (err->errno) | |
| return; | |
| /* | |
| * First the sync bits are sent: 11111WS0. | |
| * Where W is the read/write (RW) bit and S is the register/data (RS) bit. | |
| * Then, every 8 bits instruction/data will be separated into 2 groups. | |
| * Higher 4 bits (DB7~DB4) will be placed in the first section followed by | |
| * 4 '0's. And lower 4 bits (DB3~DB0) will be placed in the second section | |
| * followed by 4 '0's. | |
| */ | |
| if (cmd == SET_GDRAM_ADDRESS) | |
| size = st7920_store_gdram_address(data, reg); | |
| else if (cmd == SET_GDRAM_DATA) | |
| size = st7920_store_gdram_data(data, reg); | |
| else | |
| size = st7920_store_others(cmd, data, reg); | |
| ret = spi_write(spi, reg, size); | |
| if (ret) { | |
| err->errno = ret; | |
| return; | |
| } | |
| if (delay_us) | |
| udelay(delay_us); | |
| } | |
| static const struct regmap_config st7920_spi_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| static const struct of_device_id st7920_of_match[] = { | |
| /* st7920 family */ | |
| { | |
| .compatible = "sitronix,st7920", | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, st7920_of_match); | |
| /* | |
| * The SPI core always reports a MODALIAS uevent of the form "spi:<dev>", even | |
| * if the device was registered via OF. This means that the module will not be | |
| * auto loaded, unless it contains an alias that matches the MODALIAS reported. | |
| * | |
| * To workaround this issue, add a SPI device ID table. Even when this should | |
| * not be needed for this driver to match the registered SPI devices. | |
| */ | |
| static const struct spi_device_id st7920_spi_id[] = { | |
| /* st7920 family */ | |
| { "st7920", 0 }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(spi, st7920_spi_id); | |
| static void st7920_power_on(struct st7920_device *st7920, | |
| struct spi7920_error *err) | |
| { | |
| st7920_spi_write(st7920->spi, SET_DISPLAY_ON, NULL, 72, err); | |
| } | |
| static void st7920_power_off(struct st7920_device *st7920, | |
| struct spi7920_error *err) | |
| { | |
| st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, err); | |
| st7920_spi_write(st7920->spi, SET_DISPLAY_OFF, NULL, 72, err); | |
| } | |
| static void st7920_hw_reset(struct st7920_device *st7920) | |
| { | |
| if (!st7920->reset_gpio) | |
| return; | |
| gpiod_set_value_cansleep(st7920->reset_gpio, 1); | |
| usleep_range(15, 20); | |
| gpiod_set_value_cansleep(st7920->reset_gpio, 0); | |
| msleep(40); | |
| } | |
| static int st7920_init(struct st7920_device *st7920) | |
| { | |
| struct spi7920_error err = {0}; | |
| st7920_spi_write(st7920->spi, SET_BASIC_INSTRUCTION_SET, NULL, 72, &err); | |
| st7920_power_on(st7920, &err); | |
| st7920_spi_write(st7920->spi, SET_GRAPHICS_DISPLAY, NULL, 72, &err); | |
| st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err); | |
| return err.errno; | |
| } | |
| static int st7920_update_rect(struct st7920_device *st7920, | |
| struct drm_rect *rect, u8 *buf, | |
| u8 *data_array) | |
| { | |
| struct spi7920_error err = {0}; | |
| u32 array_idx = 0; | |
| int i, j; | |
| /* | |
| * The screen is divided in 64(Y)x8(X) segments and each segment is | |
| * further divided in 2 bytes (D15~D0). | |
| * | |
| * Segment 0x0 is in the top-right corner, while segment 63x15 is in the | |
| * bottom-left. They would be displayed in the screen in the following way: | |
| * 0x0 0x1 0x2 ... 0x15 | |
| * 1x0 1x1 1x2 ... 1x15 | |
| * ... | |
| * 63x0 63x1 63x2 ... 63x15 | |
| * | |
| * The data in each byte is big endian. | |
| */ | |
| for (i = 0; i < ST7920_SCANLINES; i++) { | |
| u8 *line_start = buf + (i * ST7920_PITCH); | |
| u8 line_buffer[ST7920_PITCH]; | |
| for (j = 0; j < ST7920_PITCH; j++) { | |
| line_buffer[j] = bitrev8(line_start[j]); | |
| data_array[array_idx++] = line_buffer[j]; | |
| } | |
| st7920_spi_write(st7920->spi, SET_GDRAM_ADDRESS, &i, 72, &err); | |
| st7920_spi_write(st7920->spi, SET_GDRAM_DATA, line_buffer, 72, &err); | |
| } | |
| return err.errno; | |
| } | |
| static void st7920_clear_screen(struct st7920_device *st7920, u8 *data_array) | |
| { | |
| struct spi7920_error err = {0}; | |
| memset(data_array, 0, BYTES_IN_DISPLAY); | |
| st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err); | |
| } | |
| static int st7920_fb_blit_rect(struct drm_framebuffer *fb, | |
| const struct iosys_map *vmap, | |
| struct drm_rect *rect, | |
| u8 *buf, u8 *data_array, | |
| struct drm_format_conv_state *fmtcnv_state) | |
| { | |
| struct st7920_device *st7920 = drm_to_st7920(fb->dev); | |
| struct iosys_map dst; | |
| unsigned int dst_pitch; | |
| int ret; | |
| /* Align y to display page boundaries */ | |
| rect->y1 = round_down(rect->y1, PIXELS_PER_SEGMENT); | |
| rect->y2 = min_t(unsigned int, round_up(rect->y2, PIXELS_PER_SEGMENT), st7920->height); | |
| dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 8); | |
| iosys_map_set_vaddr(&dst, buf); | |
| drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, vmap, fb, rect, fmtcnv_state); | |
| ret = st7920_update_rect(st7920, rect, buf, data_array); | |
| return ret; | |
| } | |
| static int st7920_primary_plane_atomic_check(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = plane->dev; | |
| struct st7920_device *st7920 = drm_to_st7920(drm); | |
| struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); | |
| struct st7920_plane_state *st7920_state = to_st7920_plane_state(plane_state); | |
| struct drm_shadow_plane_state *shadow_plane_state = &st7920_state->base; | |
| struct drm_crtc *crtc = plane_state->crtc; | |
| struct drm_crtc_state *crtc_state = NULL; | |
| const struct drm_format_info *fi; | |
| unsigned int pitch; | |
| int ret; | |
| if (crtc) | |
| crtc_state = drm_atomic_get_new_crtc_state(state, crtc); | |
| ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state, | |
| DRM_PLANE_NO_SCALING, | |
| DRM_PLANE_NO_SCALING, | |
| false, false); | |
| if (ret) | |
| return ret; | |
| else if (!plane_state->visible) | |
| return 0; | |
| fi = drm_format_info(DRM_FORMAT_R1); | |
| if (!fi) | |
| return -EINVAL; | |
| pitch = drm_format_info_min_pitch(fi, 0, st7920->width); | |
| if (plane_state->fb->format != fi) { | |
| void *buf; | |
| /* format conversion necessary; reserve buffer */ | |
| buf = drm_format_conv_state_reserve(&shadow_plane_state->fmtcnv_state, | |
| pitch, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| } | |
| st7920_state->buffer = kcalloc(pitch, st7920->height, GFP_KERNEL); | |
| if (!st7920_state->buffer) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static void st7920_primary_plane_atomic_update(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); | |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); | |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); | |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc); | |
| struct st7920_crtc_state *st7920_crtc_state = to_st7920_crtc_state(crtc_state); | |
| struct st7920_plane_state *st7920_plane_state = to_st7920_plane_state(plane_state); | |
| struct drm_framebuffer *fb = plane_state->fb; | |
| struct drm_atomic_helper_damage_iter iter; | |
| struct drm_device *drm = plane->dev; | |
| struct drm_rect dst_clip; | |
| struct drm_rect damage; | |
| int idx; | |
| int ret; | |
| if (!drm_dev_enter(drm, &idx)) | |
| return; | |
| if (drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE) == 0) { | |
| drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); | |
| drm_atomic_for_each_plane_damage(&iter, &damage) { | |
| dst_clip = plane_state->dst; | |
| if (!drm_rect_intersect(&dst_clip, &damage)) | |
| continue; | |
| ret = st7920_fb_blit_rect(fb, &shadow_plane_state->data[0], &dst_clip, | |
| st7920_plane_state->buffer, | |
| st7920_crtc_state->data_array, | |
| &shadow_plane_state->fmtcnv_state); | |
| if (ret) | |
| drm_err_once(plane->dev, "Failed to write to device: %d.\n", ret); | |
| } | |
| drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); | |
| } | |
| drm_dev_exit(idx); | |
| } | |
| static void st7920_primary_plane_atomic_disable(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = plane->dev; | |
| struct st7920_device *st7920 = drm_to_st7920(drm); | |
| struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); | |
| struct drm_crtc_state *crtc_state; | |
| struct st7920_crtc_state *st7920_crtc_state; | |
| int idx; | |
| if (!plane_state->crtc) | |
| return; | |
| crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc); | |
| st7920_crtc_state = to_st7920_crtc_state(crtc_state); | |
| if (!drm_dev_enter(drm, &idx)) | |
| return; | |
| st7920_clear_screen(st7920, st7920_crtc_state->data_array); | |
| drm_dev_exit(idx); | |
| } | |
| /* Called during init to allocate the plane's atomic state. */ | |
| static void st7920_primary_plane_reset(struct drm_plane *plane) | |
| { | |
| struct st7920_plane_state *st7920_state; | |
| drm_WARN_ON_ONCE(plane->dev, plane->state); | |
| st7920_state = kzalloc_obj(*st7920_state); | |
| if (!st7920_state) | |
| return; | |
| __drm_gem_reset_shadow_plane(plane, &st7920_state->base); | |
| } | |
| static struct drm_plane_state *st7920_primary_plane_duplicate_state(struct drm_plane *plane) | |
| { | |
| struct drm_shadow_plane_state *new_shadow_plane_state; | |
| struct st7920_plane_state *st7920_state; | |
| if (drm_WARN_ON_ONCE(plane->dev, !plane->state)) | |
| return NULL; | |
| st7920_state = kzalloc_obj(*st7920_state); | |
| if (!st7920_state) | |
| return NULL; | |
| new_shadow_plane_state = &st7920_state->base; | |
| __drm_gem_duplicate_shadow_plane_state(plane, new_shadow_plane_state); | |
| return &new_shadow_plane_state->base; | |
| } | |
| static void st7920_primary_plane_destroy_state(struct drm_plane *plane, | |
| struct drm_plane_state *state) | |
| { | |
| struct st7920_plane_state *st7920_state = to_st7920_plane_state(state); | |
| kfree(st7920_state->buffer); | |
| __drm_gem_destroy_shadow_plane_state(&st7920_state->base); | |
| kfree(st7920_state); | |
| } | |
| static const struct drm_plane_helper_funcs st7920_primary_plane_helper_funcs = { | |
| DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, | |
| .atomic_check = st7920_primary_plane_atomic_check, | |
| .atomic_update = st7920_primary_plane_atomic_update, | |
| .atomic_disable = st7920_primary_plane_atomic_disable, | |
| }; | |
| static const struct drm_plane_funcs st7920_primary_plane_funcs = { | |
| .update_plane = drm_atomic_helper_update_plane, | |
| .disable_plane = drm_atomic_helper_disable_plane, | |
| .reset = st7920_primary_plane_reset, | |
| .atomic_duplicate_state = st7920_primary_plane_duplicate_state, | |
| .atomic_destroy_state = st7920_primary_plane_destroy_state, | |
| .destroy = drm_plane_cleanup, | |
| }; | |
| static enum drm_mode_status st7920_crtc_mode_valid(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct st7920_device *st7920 = drm_to_st7920(crtc->dev); | |
| return drm_crtc_helper_mode_valid_fixed(crtc, mode, &st7920->mode); | |
| } | |
| static int st7920_crtc_atomic_check(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); | |
| struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(crtc_state); | |
| int ret; | |
| ret = drm_crtc_helper_atomic_check(crtc, state); | |
| if (ret) | |
| return ret; | |
| st7920_state->data_array = kmalloc(BYTES_IN_DISPLAY, GFP_KERNEL); | |
| if (!st7920_state->data_array) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static void st7920_crtc_atomic_enable(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = crtc->dev; | |
| struct st7920_device *st7920 = drm_to_st7920(drm); | |
| int idx; | |
| int ret; | |
| if (!drm_dev_enter(drm, &idx)) | |
| return; | |
| st7920_hw_reset(st7920); | |
| ret = st7920_init(st7920); | |
| if (ret) | |
| drm_err(drm, "Failed to init hardware: %d\n", ret); | |
| drm_dev_exit(idx); | |
| } | |
| static void st7920_crtc_atomic_disable(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct spi7920_error err = {0}; | |
| struct drm_device *drm = crtc->dev; | |
| struct st7920_device *st7920 = drm_to_st7920(drm); | |
| int idx; | |
| drm_dev_enter(drm, &idx); | |
| st7920_power_off(st7920, &err); | |
| drm_dev_exit(idx); | |
| } | |
| /* Called during init to allocate the CRTC's atomic state. */ | |
| static void st7920_crtc_reset(struct drm_crtc *crtc) | |
| { | |
| struct st7920_crtc_state *st7920_state; | |
| drm_WARN_ON_ONCE(crtc->dev, crtc->state); | |
| st7920_state = kzalloc_obj(*st7920_state); | |
| if (!st7920_state) | |
| return; | |
| __drm_atomic_helper_crtc_reset(crtc, &st7920_state->base); | |
| } | |
| static struct drm_crtc_state *st7920_crtc_duplicate_state(struct drm_crtc *crtc) | |
| { | |
| struct st7920_crtc_state *st7920_state; | |
| if (drm_WARN_ON_ONCE(crtc->dev, !crtc->state)) | |
| return NULL; | |
| st7920_state = kzalloc_obj(*st7920_state); | |
| if (!st7920_state) | |
| return NULL; | |
| __drm_atomic_helper_crtc_duplicate_state(crtc, &st7920_state->base); | |
| return &st7920_state->base; | |
| } | |
| static void st7920_crtc_destroy_state(struct drm_crtc *crtc, | |
| struct drm_crtc_state *state) | |
| { | |
| struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(state); | |
| kfree(st7920_state->data_array); | |
| __drm_atomic_helper_crtc_destroy_state(state); | |
| kfree(st7920_state); | |
| } | |
| /* | |
| * The CRTC is always enabled. Screen updates are performed by | |
| * the primary plane's atomic_update function. Disabling clears | |
| * the screen in the primary plane's atomic_disable function. | |
| */ | |
| static const struct drm_crtc_helper_funcs st7920_crtc_helper_funcs = { | |
| .mode_valid = st7920_crtc_mode_valid, | |
| .atomic_check = st7920_crtc_atomic_check, | |
| .atomic_enable = st7920_crtc_atomic_enable, | |
| .atomic_disable = st7920_crtc_atomic_disable, | |
| }; | |
| static const struct drm_crtc_funcs st7920_crtc_funcs = { | |
| .reset = st7920_crtc_reset, | |
| .destroy = drm_crtc_cleanup, | |
| .set_config = drm_atomic_helper_set_config, | |
| .page_flip = drm_atomic_helper_page_flip, | |
| .atomic_duplicate_state = st7920_crtc_duplicate_state, | |
| .atomic_destroy_state = st7920_crtc_destroy_state, | |
| }; | |
| static const struct drm_encoder_funcs st7920_encoder_funcs = { | |
| .destroy = drm_encoder_cleanup, | |
| }; | |
| static int st7920_connector_get_modes(struct drm_connector *connector) | |
| { | |
| struct st7920_device *st7920 = drm_to_st7920(connector->dev); | |
| return drm_connector_helper_get_modes_fixed(connector, &st7920->mode); | |
| } | |
| static const struct drm_connector_helper_funcs st7920_connector_helper_funcs = { | |
| .get_modes = st7920_connector_get_modes, | |
| }; | |
| static const struct drm_connector_funcs st7920_connector_funcs = { | |
| .reset = drm_atomic_helper_connector_reset, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .destroy = drm_connector_cleanup, | |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| }; | |
| static const struct drm_mode_config_funcs st7920_mode_config_funcs = { | |
| .fb_create = drm_gem_fb_create_with_dirty, | |
| .atomic_check = drm_atomic_helper_check, | |
| .atomic_commit = drm_atomic_helper_commit, | |
| }; | |
| static const uint32_t st7920_formats[] = { | |
| DRM_FORMAT_XRGB8888, | |
| }; | |
| DEFINE_DRM_GEM_FOPS(st7920_fops); | |
| static const struct drm_driver st7920_drm_driver = { | |
| DRM_GEM_SHMEM_DRIVER_OPS, | |
| DRM_FBDEV_SHMEM_DRIVER_OPS, | |
| .name = DRIVER_NAME, | |
| .desc = DRIVER_DESC, | |
| .major = DRIVER_MAJOR, | |
| .minor = DRIVER_MINOR, | |
| .driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET, | |
| .fops = &st7920_fops, | |
| }; | |
| static int st7920_init_modeset(struct st7920_device *st7920) | |
| { | |
| struct drm_display_mode *mode = &st7920->mode; | |
| struct drm_device *drm = &st7920->drm; | |
| unsigned long max_width, max_height; | |
| struct drm_plane *primary_plane; | |
| struct drm_crtc *crtc; | |
| struct drm_encoder *encoder; | |
| struct drm_connector *connector; | |
| int ret; | |
| /* | |
| * Modesetting | |
| */ | |
| ret = drmm_mode_config_init(drm); | |
| if (ret) { | |
| drm_err(drm, "DRM mode config init failed: %d\n", ret); | |
| return ret; | |
| } | |
| mode->type = DRM_MODE_TYPE_DRIVER; | |
| mode->clock = 30; | |
| mode->hdisplay = st7920->width; | |
| mode->htotal = st7920->width; | |
| mode->hsync_start = st7920->width; | |
| mode->hsync_end = st7920->width; | |
| mode->vdisplay = st7920->height; | |
| mode->vtotal = st7920->height; | |
| mode->vsync_start = st7920->height; | |
| mode->vsync_end = st7920->height; | |
| mode->width_mm = 27; | |
| mode->height_mm = 27; | |
| max_width = max_t(unsigned long, mode->hdisplay, DRM_SHADOW_PLANE_MAX_WIDTH); | |
| max_height = max_t(unsigned long, mode->vdisplay, DRM_SHADOW_PLANE_MAX_HEIGHT); | |
| drm->mode_config.min_width = mode->hdisplay; | |
| drm->mode_config.max_width = max_width; | |
| drm->mode_config.min_height = mode->vdisplay; | |
| drm->mode_config.max_height = max_height; | |
| drm->mode_config.preferred_depth = 24; | |
| drm->mode_config.funcs = &st7920_mode_config_funcs; | |
| /* Primary plane */ | |
| primary_plane = &st7920->primary_plane; | |
| ret = drm_universal_plane_init(drm, primary_plane, 0, &st7920_primary_plane_funcs, | |
| st7920_formats, ARRAY_SIZE(st7920_formats), | |
| NULL, DRM_PLANE_TYPE_PRIMARY, NULL); | |
| if (ret) { | |
| drm_err(drm, "DRM primary plane init failed: %d\n", ret); | |
| return ret; | |
| } | |
| drm_plane_helper_add(primary_plane, &st7920_primary_plane_helper_funcs); | |
| drm_plane_enable_fb_damage_clips(primary_plane); | |
| /* CRTC */ | |
| crtc = &st7920->crtc; | |
| ret = drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL, | |
| &st7920_crtc_funcs, NULL); | |
| if (ret) { | |
| drm_err(drm, "DRM crtc init failed: %d\n", ret); | |
| return ret; | |
| } | |
| drm_crtc_helper_add(crtc, &st7920_crtc_helper_funcs); | |
| /* Encoder */ | |
| encoder = &st7920->encoder; | |
| ret = drm_encoder_init(drm, encoder, &st7920_encoder_funcs, | |
| DRM_MODE_ENCODER_NONE, NULL); | |
| if (ret) { | |
| drm_err(drm, "DRM encoder init failed: %d\n", ret); | |
| return ret; | |
| } | |
| encoder->possible_crtcs = drm_crtc_mask(crtc); | |
| /* Connector */ | |
| connector = &st7920->connector; | |
| ret = drm_connector_init(drm, connector, &st7920_connector_funcs, | |
| DRM_MODE_CONNECTOR_Unknown); | |
| if (ret) { | |
| drm_err(drm, "DRM connector init failed: %d\n", ret); | |
| return ret; | |
| } | |
| drm_connector_helper_add(connector, &st7920_connector_helper_funcs); | |
| ret = drm_connector_attach_encoder(connector, encoder); | |
| if (ret) { | |
| drm_err(drm, "DRM attach connector to encoder failed: %d\n", ret); | |
| return ret; | |
| } | |
| drm_mode_config_reset(drm); | |
| return 0; | |
| } | |
| static int st7920_probe(struct spi_device *spi) | |
| { | |
| struct st7920_device *st7920; | |
| struct regmap *regmap; | |
| struct device *dev = &spi->dev; | |
| struct drm_device *drm; | |
| int ret; | |
| regmap = devm_regmap_init_spi(spi, &st7920_spi_regmap_config); | |
| if (IS_ERR(regmap)) | |
| return PTR_ERR(regmap); | |
| st7920 = devm_drm_dev_alloc(dev, &st7920_drm_driver, | |
| struct st7920_device, drm); | |
| if (IS_ERR(st7920)) | |
| return PTR_ERR(st7920); | |
| drm = &st7920->drm; | |
| st7920->drm.dev = dev; | |
| st7920->regmap = regmap; | |
| st7920->spi = spi; | |
| st7920->width = ST7920_DEFAULT_WIDTH; | |
| st7920->height = ST7920_DEFAULT_HEIGHT; | |
| st7920->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(st7920->reset_gpio)) { | |
| ret = PTR_ERR(st7920->reset_gpio); | |
| return dev_err_probe(dev, ret, "Unable to retrieve reset GPIO\n"); | |
| } | |
| spi_set_drvdata(spi, st7920); | |
| ret = st7920_init_modeset(st7920); | |
| if (ret) | |
| return ret; | |
| ret = drm_dev_register(drm, 0); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "DRM device register failed\n"); | |
| drm_client_setup(drm, NULL); | |
| return 0; | |
| } | |
| static void st7920_remove(struct spi_device *spi) | |
| { | |
| struct st7920_device *st7920 = spi_get_drvdata(spi); | |
| drm_dev_unplug(&st7920->drm); | |
| drm_atomic_helper_shutdown(&st7920->drm); | |
| } | |
| static void st7920_shutdown(struct spi_device *spi) | |
| { | |
| struct st7920_device *st7920 = spi_get_drvdata(spi); | |
| drm_atomic_helper_shutdown(&st7920->drm); | |
| } | |
| static struct spi_driver st7920_spi_driver = { | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .of_match_table = st7920_of_match, | |
| }, | |
| .id_table = st7920_spi_id, | |
| .probe = st7920_probe, | |
| .remove = st7920_remove, | |
| .shutdown = st7920_shutdown, | |
| }; | |
| module_spi_driver(st7920_spi_driver); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_AUTHOR("Iker Pedrosa <ipedrosam@gmail.com>"); | |
| MODULE_LICENSE("GPL"); |