| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Driver for Sitronix ST7571, a 4 level gray scale dot matrix LCD controller | |
| * | |
| * Copyright (C) 2025 Marcus Folkesson <marcus.folkesson@gmail.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/regmap.h> | |
| #include <drm/clients/drm_client_setup.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_connector.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include <drm/drm_damage_helper.h> | |
| #include <drm/drm_drv.h> | |
| #include <drm/drm_encoder.h> | |
| #include <drm/drm_fb_helper.h> | |
| #include <drm/drm_fbdev_shmem.h> | |
| #include <drm/drm_fourcc.h> | |
| #include <drm/drm_framebuffer.h> | |
| #include <drm/drm_gem_atomic_helper.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include <drm/drm_gem_shmem_helper.h> | |
| #include <drm/drm_modeset_helper_vtables.h> | |
| #include <drm/drm_module.h> | |
| #include <drm/drm_plane.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include <video/display_timing.h> | |
| #include <video/of_display_timing.h> | |
| #include "st7571.h" | |
| #define ST7571_COMMAND_MODE (0x00) | |
| #define ST7571_DATA_MODE (0x40) | |
| /* Normal mode command set */ | |
| #define ST7571_DISPLAY_OFF (0xae) | |
| #define ST7571_DISPLAY_ON (0xaf) | |
| #define ST7571_OSC_ON (0xab) | |
| #define ST7571_SET_COLUMN_LSB(c) (0x00 | FIELD_PREP(GENMASK(3, 0), (c))) | |
| #define ST7571_SET_COLUMN_MSB(c) (0x10 | FIELD_PREP(GENMASK(2, 0), (c) >> 4)) | |
| #define ST7571_SET_COM0_LSB(x) (FIELD_PREP(GENMASK(6, 0), (x))) | |
| #define ST7571_SET_COM0_MSB (0x44) | |
| #define ST7571_SET_COM_SCAN_DIR(d) (0xc0 | FIELD_PREP(GENMASK(3, 3), (d))) | |
| #define ST7571_SET_CONTRAST_LSB(c) (FIELD_PREP(GENMASK(5, 0), (c))) | |
| #define ST7571_SET_CONTRAST_MSB (0x81) | |
| #define ST7571_SET_DISPLAY_DUTY_LSB(d) (FIELD_PREP(GENMASK(7, 0), (d))) | |
| #define ST7571_SET_DISPLAY_DUTY_MSB (0x48) | |
| #define ST7571_SET_ENTIRE_DISPLAY_ON(p) (0xa4 | FIELD_PREP(GENMASK(0, 0), (p))) | |
| #define ST7571_SET_LCD_BIAS(b) (0x50 | FIELD_PREP(GENMASK(2, 0), (b))) | |
| #define ST7571_SET_MODE_LSB(m) (FIELD_PREP(GENMASK(7, 2), (m))) | |
| #define ST7571_SET_MODE_MSB (0x38) | |
| #define ST7571_SET_PAGE(p) (0xb0 | FIELD_PREP(GENMASK(3, 0), (p))) | |
| #define ST7571_SET_POWER(p) (0x28 | FIELD_PREP(GENMASK(2, 0), (p))) | |
| #define ST7571_SET_REGULATOR_REG(r) (0x20 | FIELD_PREP(GENMASK(2, 0), (r))) | |
| #define ST7571_SET_REVERSE(r) (0xa6 | FIELD_PREP(GENMASK(0, 0), (r))) | |
| #define ST7571_SET_SEG_SCAN_DIR(d) (0xa0 | FIELD_PREP(GENMASK(0, 0), (d))) | |
| #define ST7571_SET_START_LINE_LSB(l) (FIELD_PREP(GENMASK(6, 0), (l))) | |
| #define ST7571_SET_START_LINE_MSB (0x40) | |
| /* Extension command set 3 */ | |
| #define ST7571_COMMAND_SET_3 (0x7b) | |
| #define ST7571_SET_COLOR_MODE(c) (0x10 | FIELD_PREP(GENMASK(0, 0), (c))) | |
| #define ST7571_COMMAND_SET_NORMAL (0x00) | |
| /* ST7567 commands */ | |
| #define ST7567_SET_LCD_BIAS(m) (0xa2 | FIELD_PREP(GENMASK(0, 0), (m))) | |
| #define ST7571_PAGE_HEIGHT 8 | |
| #define DRIVER_NAME "st7571" | |
| #define DRIVER_DESC "ST7571 DRM driver" | |
| #define DRIVER_MAJOR 1 | |
| #define DRIVER_MINOR 0 | |
| static inline struct st7571_device *drm_to_st7571(struct drm_device *drm) | |
| { | |
| return container_of(drm, struct st7571_device, drm); | |
| } | |
| static int st7571_send_command_list(struct st7571_device *st7571, | |
| const u8 *cmd_list, size_t len) | |
| { | |
| int ret; | |
| for (int i = 0; i < len; i++) { | |
| ret = regmap_write(st7571->regmap, ST7571_COMMAND_MODE, cmd_list[i]); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static inline u8 st7571_transform_xy(const char *p, int x, int y, u8 bpp) | |
| { | |
| int xrest = x % 8; | |
| u8 result = 0; | |
| u8 row_len = 16 * bpp; | |
| /* | |
| * Transforms an (x, y) pixel coordinate into a vertical 8-bit | |
| * column from the framebuffer. It calculates the corresponding byte in the | |
| * framebuffer, extracts the bit at the given x position across 8 consecutive | |
| * rows, and packs those bits into a single byte. | |
| * | |
| * Return an 8-bit value representing a vertical column of pixels. | |
| */ | |
| x = x / 8; | |
| y = (y / 8) * 8; | |
| for (int i = 0; i < 8; i++) { | |
| int row_idx = y + i; | |
| u8 byte = p[row_idx * row_len + x]; | |
| u8 bit = (byte >> xrest) & 1; | |
| result |= (bit << i); | |
| } | |
| return result; | |
| } | |
| static int st7571_set_position(struct st7571_device *st7571, int x, int y) | |
| { | |
| u8 cmd_list[] = { | |
| ST7571_SET_COLUMN_LSB(x), | |
| ST7571_SET_COLUMN_MSB(x), | |
| ST7571_SET_PAGE(y / ST7571_PAGE_HEIGHT), | |
| }; | |
| return st7571_send_command_list(st7571, cmd_list, ARRAY_SIZE(cmd_list)); | |
| } | |
| static int st7571_fb_clear_screen(struct st7571_device *st7571) | |
| { | |
| u32 npixels = st7571->ncols * round_up(st7571->nlines, ST7571_PAGE_HEIGHT) * st7571->bpp; | |
| char pixelvalue = 0x00; | |
| st7571_set_position(st7571, 0, 0); | |
| for (int i = 0; i < npixels; i++) | |
| regmap_bulk_write(st7571->regmap, ST7571_DATA_MODE, &pixelvalue, 1); | |
| return 0; | |
| } | |
| static void st7571_prepare_buffer_monochrome(struct st7571_device *st7571, | |
| const struct iosys_map *vmap, | |
| struct drm_framebuffer *fb, | |
| struct drm_rect *rect, | |
| struct drm_format_conv_state *fmtcnv_state) | |
| { | |
| unsigned int dst_pitch; | |
| struct iosys_map dst; | |
| u32 size; | |
| switch (fb->format->format) { | |
| case DRM_FORMAT_XRGB8888: | |
| dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 8); | |
| iosys_map_set_vaddr(&dst, st7571->hwbuf); | |
| drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, vmap, fb, rect, fmtcnv_state); | |
| break; | |
| case DRM_FORMAT_R1: | |
| size = (rect->x2 - rect->x1) * (rect->y2 - rect->y1) / 8; | |
| memcpy(st7571->hwbuf, vmap->vaddr, size); | |
| break; | |
| } | |
| } | |
| static void st7571_prepare_buffer_grayscale(struct st7571_device *st7571, | |
| const struct iosys_map *vmap, | |
| struct drm_framebuffer *fb, | |
| struct drm_rect *rect, | |
| struct drm_format_conv_state *fmtcnv_state) | |
| { | |
| u32 size = (rect->x2 - rect->x1) * (rect->y2 - rect->y1) / 8; | |
| unsigned int dst_pitch; | |
| struct iosys_map dst; | |
| switch (fb->format->format) { | |
| case DRM_FORMAT_XRGB8888: | |
| dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 4); | |
| iosys_map_set_vaddr(&dst, st7571->hwbuf); | |
| drm_fb_xrgb8888_to_gray2(&dst, &dst_pitch, vmap, fb, rect, fmtcnv_state); | |
| break; | |
| case DRM_FORMAT_R1: | |
| size = (rect->x2 - rect->x1) * (rect->y2 - rect->y1) / 8; | |
| memcpy(st7571->hwbuf, vmap->vaddr, size); | |
| break; | |
| case DRM_FORMAT_R2: | |
| size = (rect->x2 - rect->x1) * (rect->y2 - rect->y1) / 4; | |
| memcpy(st7571->hwbuf, vmap->vaddr, size); | |
| break; | |
| } | |
| } | |
| static int st7571_fb_update_rect_monochrome(struct drm_framebuffer *fb, struct drm_rect *rect) | |
| { | |
| struct st7571_device *st7571 = drm_to_st7571(fb->dev); | |
| char *row = st7571->row; | |
| /* Align y to display page boundaries */ | |
| rect->y1 = round_down(rect->y1, ST7571_PAGE_HEIGHT); | |
| rect->y2 = min_t(unsigned int, round_up(rect->y2, ST7571_PAGE_HEIGHT), st7571->nlines); | |
| for (int y = rect->y1; y < rect->y2; y += ST7571_PAGE_HEIGHT) { | |
| for (int x = rect->x1; x < rect->x2; x++) | |
| row[x] = st7571_transform_xy(st7571->hwbuf, x, y, 1); | |
| st7571_set_position(st7571, rect->x1, y); | |
| /* TODO: Investige why we can't write multiple bytes at once */ | |
| for (int x = rect->x1; x < rect->x2; x++) | |
| regmap_bulk_write(st7571->regmap, ST7571_DATA_MODE, row + x, 1); | |
| } | |
| return 0; | |
| } | |
| static int st7571_fb_update_rect_grayscale(struct drm_framebuffer *fb, struct drm_rect *rect) | |
| { | |
| struct st7571_device *st7571 = drm_to_st7571(fb->dev); | |
| u32 format = fb->format->format; | |
| char *row = st7571->row; | |
| int x1; | |
| int x2; | |
| /* Align y to display page boundaries */ | |
| rect->y1 = round_down(rect->y1, ST7571_PAGE_HEIGHT); | |
| rect->y2 = min_t(unsigned int, round_up(rect->y2, ST7571_PAGE_HEIGHT), st7571->nlines); | |
| switch (format) { | |
| case DRM_FORMAT_R1: | |
| x1 = rect->x1 * 1; | |
| x2 = rect->x2 * 1; | |
| break; | |
| case DRM_FORMAT_R2: | |
| fallthrough; | |
| case DRM_FORMAT_XRGB8888: | |
| x1 = rect->x1 * 2; | |
| x2 = rect->x2 * 2; | |
| break; | |
| } | |
| for (int y = rect->y1; y < rect->y2; y += ST7571_PAGE_HEIGHT) { | |
| for (int x = x1; x < x2; x++) | |
| row[x] = st7571_transform_xy(st7571->hwbuf, x, y, 2); | |
| st7571_set_position(st7571, rect->x1, y); | |
| /* TODO: Investige why we can't write multiple bytes at once */ | |
| for (int x = x1; x < x2; x++) { | |
| regmap_bulk_write(st7571->regmap, ST7571_DATA_MODE, row + x, 1); | |
| /* | |
| * As the display supports grayscale, all pixels must be written as two bits | |
| * even if the format is monochrome. | |
| * | |
| * The bit values maps to the following grayscale: | |
| * 0 0 = Black | |
| * 0 1 = Dark gray | |
| * 1 0 = Light gray | |
| * 1 1 = White | |
| * | |
| * For monochrome formats, write the same value twice to get | |
| * either a black or white pixel. | |
| */ | |
| if (format == DRM_FORMAT_R1) | |
| regmap_bulk_write(st7571->regmap, ST7571_DATA_MODE, row + x, 1); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int st7571_connector_get_modes(struct drm_connector *conn) | |
| { | |
| struct st7571_device *st7571 = drm_to_st7571(conn->dev); | |
| return drm_connector_helper_get_modes_fixed(conn, &st7571->mode); | |
| } | |
| static const struct drm_connector_helper_funcs st7571_connector_helper_funcs = { | |
| .get_modes = st7571_connector_get_modes, | |
| }; | |
| static const struct st7571_panel_format st7571_monochrome = { | |
| .prepare_buffer = st7571_prepare_buffer_monochrome, | |
| .update_rect = st7571_fb_update_rect_monochrome, | |
| .mode = ST7571_COLOR_MODE_BLACKWHITE, | |
| .formats = { | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_R1, | |
| }, | |
| .nformats = 2, | |
| }; | |
| static const struct st7571_panel_format st7571_grayscale = { | |
| .prepare_buffer = st7571_prepare_buffer_grayscale, | |
| .update_rect = st7571_fb_update_rect_grayscale, | |
| .mode = ST7571_COLOR_MODE_GRAY, | |
| .formats = { | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_R1, | |
| DRM_FORMAT_R2, | |
| }, | |
| .nformats = 3, | |
| }; | |
| static const u64 st7571_primary_plane_fmtmods[] = { | |
| DRM_FORMAT_MOD_LINEAR, | |
| DRM_FORMAT_MOD_INVALID | |
| }; | |
| static int st7571_primary_plane_helper_atomic_check(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); | |
| struct drm_crtc *new_crtc = new_plane_state->crtc; | |
| struct drm_crtc_state *new_crtc_state = NULL; | |
| if (new_crtc) | |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, new_crtc); | |
| return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, | |
| DRM_PLANE_NO_SCALING, | |
| DRM_PLANE_NO_SCALING, | |
| false, false); | |
| } | |
| static void st7571_primary_plane_helper_atomic_update(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); | |
| struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); | |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); | |
| struct drm_framebuffer *fb = plane_state->fb; | |
| struct drm_atomic_helper_damage_iter iter; | |
| struct drm_device *drm = plane->dev; | |
| struct drm_rect damage; | |
| struct st7571_device *st7571 = drm_to_st7571(plane->dev); | |
| int ret, idx; | |
| if (!fb) | |
| return; /* no framebuffer; plane is disabled */ | |
| ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE); | |
| if (ret) | |
| return; | |
| if (!drm_dev_enter(drm, &idx)) | |
| goto out_drm_gem_fb_end_cpu_access; | |
| drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); | |
| drm_atomic_for_each_plane_damage(&iter, &damage) { | |
| st7571->pformat->prepare_buffer(st7571, | |
| &shadow_plane_state->data[0], | |
| fb, &damage, | |
| &shadow_plane_state->fmtcnv_state); | |
| st7571->pformat->update_rect(fb, &damage); | |
| } | |
| drm_dev_exit(idx); | |
| out_drm_gem_fb_end_cpu_access: | |
| drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); | |
| } | |
| static void st7571_primary_plane_helper_atomic_disable(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = plane->dev; | |
| struct st7571_device *st7571 = drm_to_st7571(plane->dev); | |
| int idx; | |
| if (!drm_dev_enter(drm, &idx)) | |
| return; | |
| st7571_fb_clear_screen(st7571); | |
| drm_dev_exit(idx); | |
| } | |
| static const struct drm_plane_helper_funcs st7571_primary_plane_helper_funcs = { | |
| DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, | |
| .atomic_check = st7571_primary_plane_helper_atomic_check, | |
| .atomic_update = st7571_primary_plane_helper_atomic_update, | |
| .atomic_disable = st7571_primary_plane_helper_atomic_disable, | |
| }; | |
| static const struct drm_plane_funcs st7571_primary_plane_funcs = { | |
| .update_plane = drm_atomic_helper_update_plane, | |
| .disable_plane = drm_atomic_helper_disable_plane, | |
| .destroy = drm_plane_cleanup, | |
| DRM_GEM_SHADOW_PLANE_FUNCS, | |
| }; | |
| /* | |
| * CRTC | |
| */ | |
| static enum drm_mode_status st7571_crtc_mode_valid(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct st7571_device *st7571 = drm_to_st7571(crtc->dev); | |
| return drm_crtc_helper_mode_valid_fixed(crtc, mode, &st7571->mode); | |
| } | |
| static const struct drm_crtc_helper_funcs st7571_crtc_helper_funcs = { | |
| .atomic_check = drm_crtc_helper_atomic_check, | |
| .mode_valid = st7571_crtc_mode_valid, | |
| }; | |
| static const struct drm_crtc_funcs st7571_crtc_funcs = { | |
| .reset = drm_atomic_helper_crtc_reset, | |
| .destroy = drm_crtc_cleanup, | |
| .set_config = drm_atomic_helper_set_config, | |
| .page_flip = drm_atomic_helper_page_flip, | |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, | |
| }; | |
| /* | |
| * Encoder | |
| */ | |
| static void st7571_encoder_atomic_enable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = encoder->dev; | |
| struct st7571_device *st7571 = drm_to_st7571(drm); | |
| u8 command = ST7571_DISPLAY_ON; | |
| int ret; | |
| ret = st7571->pdata->init(st7571); | |
| if (ret) | |
| return; | |
| st7571_send_command_list(st7571, &command, 1); | |
| } | |
| static void st7571_encoder_atomic_disable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *drm = encoder->dev; | |
| struct st7571_device *st7571 = drm_to_st7571(drm); | |
| u8 command = ST7571_DISPLAY_OFF; | |
| st7571_send_command_list(st7571, &command, 1); | |
| } | |
| static const struct drm_encoder_funcs st7571_encoder_funcs = { | |
| .destroy = drm_encoder_cleanup, | |
| }; | |
| static const struct drm_encoder_helper_funcs st7571_encoder_helper_funcs = { | |
| .atomic_enable = st7571_encoder_atomic_enable, | |
| .atomic_disable = st7571_encoder_atomic_disable, | |
| }; | |
| /* | |
| * Connector | |
| */ | |
| static const struct drm_connector_funcs st7571_connector_funcs = { | |
| .reset = drm_atomic_helper_connector_reset, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .destroy = drm_connector_cleanup, | |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| }; | |
| static const struct drm_mode_config_funcs st7571_mode_config_funcs = { | |
| .fb_create = drm_gem_fb_create_with_dirty, | |
| .atomic_check = drm_atomic_helper_check, | |
| .atomic_commit = drm_atomic_helper_commit, | |
| }; | |
| static struct drm_display_mode st7571_mode(struct st7571_device *st7571) | |
| { | |
| struct drm_display_mode mode = { | |
| DRM_SIMPLE_MODE(st7571->ncols, st7571->nlines, | |
| st7571->width_mm, st7571->height_mm), | |
| }; | |
| return mode; | |
| } | |
| static int st7571_mode_config_init(struct st7571_device *st7571) | |
| { | |
| struct drm_device *drm = &st7571->drm; | |
| const struct st7571_panel_constraints *constraints = &st7571->pdata->constraints; | |
| int ret; | |
| ret = drmm_mode_config_init(drm); | |
| if (ret) | |
| return ret; | |
| drm->mode_config.min_width = constraints->min_ncols; | |
| drm->mode_config.min_height = constraints->min_nlines; | |
| drm->mode_config.max_width = constraints->max_ncols; | |
| drm->mode_config.max_height = constraints->max_nlines; | |
| drm->mode_config.preferred_depth = 24; | |
| drm->mode_config.funcs = &st7571_mode_config_funcs; | |
| return 0; | |
| } | |
| static int st7571_plane_init(struct st7571_device *st7571, | |
| const struct st7571_panel_format *pformat) | |
| { | |
| struct drm_plane *primary_plane = &st7571->primary_plane; | |
| struct drm_device *drm = &st7571->drm; | |
| int ret; | |
| ret = drm_universal_plane_init(drm, primary_plane, 0, | |
| &st7571_primary_plane_funcs, | |
| pformat->formats, | |
| pformat->nformats, | |
| st7571_primary_plane_fmtmods, | |
| DRM_PLANE_TYPE_PRIMARY, NULL); | |
| if (ret) | |
| return ret; | |
| drm_plane_helper_add(primary_plane, &st7571_primary_plane_helper_funcs); | |
| drm_plane_enable_fb_damage_clips(primary_plane); | |
| return 0; | |
| } | |
| static int st7571_crtc_init(struct st7571_device *st7571) | |
| { | |
| struct drm_plane *primary_plane = &st7571->primary_plane; | |
| struct drm_crtc *crtc = &st7571->crtc; | |
| struct drm_device *drm = &st7571->drm; | |
| int ret; | |
| ret = drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL, | |
| &st7571_crtc_funcs, NULL); | |
| if (ret) | |
| return ret; | |
| drm_crtc_helper_add(crtc, &st7571_crtc_helper_funcs); | |
| return 0; | |
| } | |
| static int st7571_encoder_init(struct st7571_device *st7571) | |
| { | |
| struct drm_encoder *encoder = &st7571->encoder; | |
| struct drm_crtc *crtc = &st7571->crtc; | |
| struct drm_device *drm = &st7571->drm; | |
| int ret; | |
| ret = drm_encoder_init(drm, encoder, &st7571_encoder_funcs, DRM_MODE_ENCODER_NONE, NULL); | |
| if (ret) | |
| return ret; | |
| drm_encoder_helper_add(encoder, &st7571_encoder_helper_funcs); | |
| encoder->possible_crtcs = drm_crtc_mask(crtc); | |
| return 0; | |
| } | |
| static int st7571_connector_init(struct st7571_device *st7571) | |
| { | |
| struct drm_connector *connector = &st7571->connector; | |
| struct drm_encoder *encoder = &st7571->encoder; | |
| struct drm_device *drm = &st7571->drm; | |
| int ret; | |
| ret = drm_connector_init(drm, connector, &st7571_connector_funcs, | |
| DRM_MODE_CONNECTOR_Unknown); | |
| if (ret) | |
| return ret; | |
| drm_connector_helper_add(connector, &st7571_connector_helper_funcs); | |
| return drm_connector_attach_encoder(connector, encoder); | |
| } | |
| DEFINE_DRM_GEM_FOPS(st7571_fops); | |
| static const struct drm_driver st7571_driver = { | |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, | |
| .name = DRIVER_NAME, | |
| .desc = DRIVER_DESC, | |
| .major = DRIVER_MAJOR, | |
| .minor = DRIVER_MINOR, | |
| .fops = &st7571_fops, | |
| DRM_GEM_SHMEM_DRIVER_OPS, | |
| DRM_FBDEV_SHMEM_DRIVER_OPS, | |
| }; | |
| static int st7571_validate_parameters(struct st7571_device *st7571) | |
| { | |
| struct device *dev = st7571->dev; | |
| const struct st7571_panel_constraints *constraints = &st7571->pdata->constraints; | |
| if (st7571->width_mm == 0) { | |
| dev_err(dev, "Invalid panel width\n"); | |
| return -EINVAL; | |
| } | |
| if (st7571->height_mm == 0) { | |
| dev_err(dev, "Invalid panel height\n"); | |
| return -EINVAL; | |
| } | |
| if (st7571->nlines < constraints->min_nlines || | |
| st7571->nlines > constraints->max_nlines) { | |
| dev_err(dev, "Invalid timing configuration.\n"); | |
| return -EINVAL; | |
| } | |
| if (st7571->startline + st7571->nlines > constraints->max_nlines) { | |
| dev_err(dev, "Invalid timing configuration.\n"); | |
| return -EINVAL; | |
| } | |
| if (st7571->ncols < constraints->min_ncols || | |
| st7571->ncols > constraints->max_ncols) { | |
| dev_err(dev, "Invalid timing configuration.\n"); | |
| return -EINVAL; | |
| } | |
| if (st7571->grayscale && !constraints->support_grayscale) { | |
| dev_err(dev, "Grayscale not supported\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int st7567_parse_dt(struct st7571_device *st7567) | |
| { | |
| struct device *dev = st7567->dev; | |
| struct device_node *np = dev->of_node; | |
| struct display_timing dt; | |
| int ret; | |
| ret = of_get_display_timing(np, "panel-timing", &dt); | |
| if (ret) { | |
| dev_err(dev, "Failed to get display timing from DT\n"); | |
| return ret; | |
| } | |
| of_property_read_u32(np, "width-mm", &st7567->width_mm); | |
| of_property_read_u32(np, "height-mm", &st7567->height_mm); | |
| st7567->inverted = of_property_read_bool(np, "sitronix,inverted"); | |
| st7567->pformat = &st7571_monochrome; | |
| st7567->bpp = 1; | |
| st7567->startline = dt.vfront_porch.typ; | |
| st7567->nlines = dt.vactive.typ; | |
| st7567->ncols = dt.hactive.typ; | |
| return 0; | |
| } | |
| static int st7571_parse_dt(struct st7571_device *st7571) | |
| { | |
| struct device *dev = st7571->dev; | |
| struct device_node *np = dev->of_node; | |
| struct display_timing dt; | |
| int ret; | |
| ret = of_get_display_timing(np, "panel-timing", &dt); | |
| if (ret) { | |
| dev_err(dev, "Failed to get display timing from DT\n"); | |
| return ret; | |
| } | |
| of_property_read_u32(np, "width-mm", &st7571->width_mm); | |
| of_property_read_u32(np, "height-mm", &st7571->height_mm); | |
| st7571->grayscale = of_property_read_bool(np, "sitronix,grayscale"); | |
| st7571->inverted = of_property_read_bool(np, "sitronix,inverted"); | |
| if (st7571->grayscale) { | |
| st7571->pformat = &st7571_grayscale; | |
| st7571->bpp = 2; | |
| } else { | |
| st7571->pformat = &st7571_monochrome; | |
| st7571->bpp = 1; | |
| } | |
| st7571->startline = dt.vfront_porch.typ; | |
| st7571->nlines = dt.vactive.typ; | |
| st7571->ncols = dt.hactive.typ; | |
| st7571->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); | |
| if (IS_ERR(st7571->reset)) | |
| return dev_err_probe(dev, PTR_ERR(st7571->reset), | |
| "Failed to get reset gpio\n"); | |
| return 0; | |
| } | |
| static void st7571_reset(struct st7571_device *st7571) | |
| { | |
| gpiod_set_value_cansleep(st7571->reset, 1); | |
| fsleep(20); | |
| gpiod_set_value_cansleep(st7571->reset, 0); | |
| } | |
| static int st7567_lcd_init(struct st7571_device *st7567) | |
| { | |
| /* | |
| * Most of the initialization sequence is taken directly from the | |
| * referential initial code in the ST7567 datasheet. | |
| */ | |
| u8 commands[] = { | |
| ST7571_DISPLAY_OFF, | |
| ST7567_SET_LCD_BIAS(1), | |
| ST7571_SET_SEG_SCAN_DIR(0), | |
| ST7571_SET_COM_SCAN_DIR(1), | |
| ST7571_SET_REGULATOR_REG(4), | |
| ST7571_SET_CONTRAST_MSB, | |
| ST7571_SET_CONTRAST_LSB(0x20), | |
| ST7571_SET_START_LINE_MSB, | |
| ST7571_SET_START_LINE_LSB(st7567->startline), | |
| ST7571_SET_POWER(0x4), /* Power Control, VC: ON, VR: OFF, VF: OFF */ | |
| ST7571_SET_POWER(0x6), /* Power Control, VC: ON, VR: ON, VF: OFF */ | |
| ST7571_SET_POWER(0x7), /* Power Control, VC: ON, VR: ON, VF: ON */ | |
| ST7571_SET_REVERSE(st7567->inverted ? 1 : 0), | |
| ST7571_SET_ENTIRE_DISPLAY_ON(0), | |
| }; | |
| return st7571_send_command_list(st7567, commands, ARRAY_SIZE(commands)); | |
| } | |
| static int st7571_lcd_init(struct st7571_device *st7571) | |
| { | |
| /* | |
| * Most of the initialization sequence is taken directly from the | |
| * referential initial code in the ST7571 datasheet. | |
| */ | |
| u8 commands[] = { | |
| ST7571_DISPLAY_OFF, | |
| ST7571_SET_MODE_MSB, | |
| ST7571_SET_MODE_LSB(0x2e), | |
| ST7571_SET_SEG_SCAN_DIR(0), | |
| ST7571_SET_COM_SCAN_DIR(1), | |
| ST7571_SET_COM0_MSB, | |
| ST7571_SET_COM0_LSB(0x00), | |
| ST7571_SET_START_LINE_MSB, | |
| ST7571_SET_START_LINE_LSB(st7571->startline), | |
| ST7571_OSC_ON, | |
| ST7571_SET_REGULATOR_REG(5), | |
| ST7571_SET_CONTRAST_MSB, | |
| ST7571_SET_CONTRAST_LSB(0x33), | |
| ST7571_SET_LCD_BIAS(0x04), | |
| ST7571_SET_DISPLAY_DUTY_MSB, | |
| ST7571_SET_DISPLAY_DUTY_LSB(st7571->nlines), | |
| ST7571_SET_POWER(0x4), /* Power Control, VC: ON, VR: OFF, VF: OFF */ | |
| ST7571_SET_POWER(0x6), /* Power Control, VC: ON, VR: ON, VF: OFF */ | |
| ST7571_SET_POWER(0x7), /* Power Control, VC: ON, VR: ON, VF: ON */ | |
| ST7571_COMMAND_SET_3, | |
| ST7571_SET_COLOR_MODE(st7571->pformat->mode), | |
| ST7571_COMMAND_SET_NORMAL, | |
| ST7571_SET_REVERSE(st7571->inverted ? 1 : 0), | |
| ST7571_SET_ENTIRE_DISPLAY_ON(0), | |
| }; | |
| /* Perform a reset before initializing the controller */ | |
| st7571_reset(st7571); | |
| return st7571_send_command_list(st7571, commands, ARRAY_SIZE(commands)); | |
| } | |
| struct st7571_device *st7571_probe(struct device *dev, | |
| struct regmap *regmap) | |
| { | |
| struct st7571_device *st7571; | |
| struct drm_device *drm; | |
| int ret; | |
| st7571 = devm_drm_dev_alloc(dev, &st7571_driver, | |
| struct st7571_device, drm); | |
| if (IS_ERR(st7571)) | |
| return st7571; | |
| drm = &st7571->drm; | |
| st7571->dev = dev; | |
| st7571->pdata = device_get_match_data(st7571->dev); | |
| ret = st7571->pdata->parse_dt(st7571); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = st7571_validate_parameters(st7571); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| st7571->mode = st7571_mode(st7571); | |
| st7571->regmap = regmap; | |
| st7571->hwbuf = devm_kzalloc(st7571->dev, | |
| (st7571->nlines * st7571->ncols * st7571->bpp) / 8, | |
| GFP_KERNEL); | |
| if (!st7571->hwbuf) | |
| return ERR_PTR(-ENOMEM); | |
| st7571->row = devm_kzalloc(st7571->dev, | |
| (st7571->ncols * st7571->bpp), | |
| GFP_KERNEL); | |
| if (!st7571->row) | |
| return ERR_PTR(-ENOMEM); | |
| ret = st7571_mode_config_init(st7571); | |
| if (ret) { | |
| dev_err(st7571->dev, "Failed to initialize mode config\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = st7571_plane_init(st7571, st7571->pformat); | |
| if (ret) { | |
| dev_err(st7571->dev, "Failed to initialize primary plane\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = st7571_crtc_init(st7571); | |
| if (ret < 0) { | |
| dev_err(st7571->dev, "Failed to initialize CRTC\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = st7571_encoder_init(st7571); | |
| if (ret < 0) { | |
| dev_err(st7571->dev, "Failed to initialize encoder\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = st7571_connector_init(st7571); | |
| if (ret < 0) { | |
| dev_err(st7571->dev, "Failed to initialize connector\n"); | |
| return ERR_PTR(ret); | |
| } | |
| drm_mode_config_reset(drm); | |
| ret = drm_dev_register(drm, 0); | |
| if (ret) { | |
| dev_err(st7571->dev, "Failed to register DRM device\n"); | |
| return ERR_PTR(ret); | |
| } | |
| drm_client_setup(drm, NULL); | |
| return st7571; | |
| } | |
| EXPORT_SYMBOL_GPL(st7571_probe); | |
| void st7571_remove(struct st7571_device *st7571) | |
| { | |
| drm_dev_unplug(&st7571->drm); | |
| } | |
| EXPORT_SYMBOL_GPL(st7571_remove); | |
| const struct st7571_panel_data st7567_config = { | |
| .init = st7567_lcd_init, | |
| .parse_dt = st7567_parse_dt, | |
| .constraints = { | |
| .min_nlines = 1, | |
| .max_nlines = 64, | |
| .min_ncols = 128, | |
| .max_ncols = 128, | |
| .support_grayscale = false, | |
| }, | |
| }; | |
| EXPORT_SYMBOL_NS_GPL(st7567_config, "DRM_ST7571"); | |
| const struct st7571_panel_data st7571_config = { | |
| .init = st7571_lcd_init, | |
| .parse_dt = st7571_parse_dt, | |
| .constraints = { | |
| .min_nlines = 1, | |
| .max_nlines = 128, | |
| .min_ncols = 128, | |
| .max_ncols = 128, | |
| .support_grayscale = true, | |
| }, | |
| }; | |
| EXPORT_SYMBOL_NS_GPL(st7571_config, "DRM_ST7571"); | |
| MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>"); | |
| MODULE_DESCRIPTION("DRM Driver for Sitronix ST7571 LCD controller"); | |
| MODULE_LICENSE("GPL"); |