| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Synaptics R63353 Controller driver | |
| * | |
| * Copyright (C) 2020 BSH Hausgerate GmbH | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/media-bus-format.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <drm/drm_mipi_dsi.h> | |
| #include <drm/drm_modes.h> | |
| #include <drm/drm_panel.h> | |
| #include <video/mipi_display.h> | |
| #define R63353_INSTR(...) { \ | |
| .len = sizeof((u8[]) {__VA_ARGS__}), \ | |
| .data = (u8[]){__VA_ARGS__} \ | |
| } | |
| struct r63353_instr { | |
| size_t len; | |
| const u8 *data; | |
| }; | |
| static const struct r63353_instr sharp_ls068b3sx02_init[] = { | |
| R63353_INSTR(0x51, 0xff), | |
| R63353_INSTR(0x53, 0x0c), | |
| R63353_INSTR(0x55, 0x00), | |
| R63353_INSTR(0x84, 0x00), | |
| R63353_INSTR(0x29), | |
| }; | |
| struct r63353_desc { | |
| const char *name; | |
| const struct r63353_instr *init; | |
| const size_t init_length; | |
| const struct drm_display_mode *mode; | |
| u32 width_mm; | |
| u32 height_mm; | |
| }; | |
| struct r63353_panel { | |
| struct drm_panel base; | |
| struct mipi_dsi_device *dsi; | |
| struct gpio_desc *reset_gpio; | |
| struct regulator *dvdd; | |
| struct regulator *avdd; | |
| struct r63353_desc *pdata; | |
| }; | |
| static inline struct r63353_panel *to_r63353_panel(struct drm_panel *panel) | |
| { | |
| return container_of(panel, struct r63353_panel, base); | |
| } | |
| static int r63353_panel_power_on(struct r63353_panel *rpanel) | |
| { | |
| struct mipi_dsi_device *dsi = rpanel->dsi; | |
| struct device *dev = &dsi->dev; | |
| int ret; | |
| ret = regulator_enable(rpanel->avdd); | |
| if (ret) { | |
| dev_err(dev, "Failed to enable avdd regulator (%d)\n", ret); | |
| return ret; | |
| } | |
| usleep_range(15000, 25000); | |
| ret = regulator_enable(rpanel->dvdd); | |
| if (ret) { | |
| dev_err(dev, "Failed to enable dvdd regulator (%d)\n", ret); | |
| regulator_disable(rpanel->avdd); | |
| return ret; | |
| } | |
| usleep_range(300000, 350000); | |
| gpiod_set_value(rpanel->reset_gpio, 1); | |
| usleep_range(15000, 25000); | |
| return 0; | |
| } | |
| static int r63353_panel_power_off(struct r63353_panel *rpanel) | |
| { | |
| gpiod_set_value(rpanel->reset_gpio, 0); | |
| regulator_disable(rpanel->dvdd); | |
| regulator_disable(rpanel->avdd); | |
| return 0; | |
| } | |
| static int r63353_panel_activate(struct r63353_panel *rpanel) | |
| { | |
| struct mipi_dsi_device *dsi = rpanel->dsi; | |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; | |
| int i; | |
| mipi_dsi_dcs_soft_reset_multi(&dsi_ctx); | |
| mipi_dsi_usleep_range(&dsi_ctx, 15000, 17000); | |
| mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); | |
| for (i = 0; i < rpanel->pdata->init_length; i++) { | |
| const struct r63353_instr *instr = &rpanel->pdata->init[i]; | |
| mipi_dsi_dcs_write_buffer_multi(&dsi_ctx, instr->data, | |
| instr->len); | |
| } | |
| mipi_dsi_msleep(&dsi_ctx, 120); | |
| mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx); | |
| mipi_dsi_usleep_range(&dsi_ctx, 5000, 10000); | |
| mipi_dsi_dcs_set_display_on_multi(&dsi_ctx); | |
| if (dsi_ctx.accum_err) | |
| gpiod_set_value(rpanel->reset_gpio, 0); | |
| return dsi_ctx.accum_err; | |
| } | |
| static int r63353_panel_prepare(struct drm_panel *panel) | |
| { | |
| struct r63353_panel *rpanel = to_r63353_panel(panel); | |
| struct mipi_dsi_device *dsi = rpanel->dsi; | |
| struct device *dev = &dsi->dev; | |
| int ret; | |
| dev_dbg(dev, "Preparing\n"); | |
| ret = r63353_panel_power_on(rpanel); | |
| if (ret) | |
| return ret; | |
| ret = r63353_panel_activate(rpanel); | |
| if (ret) { | |
| r63353_panel_power_off(rpanel); | |
| return ret; | |
| } | |
| dev_dbg(dev, "Prepared\n"); | |
| return 0; | |
| } | |
| static void r63353_panel_deactivate(struct r63353_panel *rpanel) | |
| { | |
| struct mipi_dsi_device *dsi = rpanel->dsi; | |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; | |
| mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); | |
| mipi_dsi_usleep_range(&dsi_ctx, 5000, 10000); | |
| mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); | |
| } | |
| static int r63353_panel_unprepare(struct drm_panel *panel) | |
| { | |
| struct r63353_panel *rpanel = to_r63353_panel(panel); | |
| r63353_panel_deactivate(rpanel); | |
| r63353_panel_power_off(rpanel); | |
| return 0; | |
| } | |
| static const struct drm_display_mode sharp_ls068b3sx02_timing = { | |
| .clock = 70000, | |
| .hdisplay = 640, | |
| .hsync_start = 640 + 35, | |
| .hsync_end = 640 + 35 + 2, | |
| .htotal = 640 + 35 + 2 + 150, | |
| .vdisplay = 1280, | |
| .vsync_start = 1280 + 2, | |
| .vsync_end = 1280 + 2 + 4, | |
| .vtotal = 1280 + 2 + 4 + 0, | |
| }; | |
| static int r63353_panel_get_modes(struct drm_panel *panel, | |
| struct drm_connector *connector) | |
| { | |
| struct r63353_panel *rpanel = to_r63353_panel(panel); | |
| struct drm_display_mode *mode; | |
| static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; | |
| mode = drm_mode_duplicate(connector->dev, rpanel->pdata->mode); | |
| if (!mode) | |
| return -ENOMEM; | |
| drm_mode_set_name(mode); | |
| drm_mode_probed_add(connector, mode); | |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | |
| connector->display_info.width_mm = rpanel->pdata->width_mm; | |
| connector->display_info.height_mm = rpanel->pdata->height_mm; | |
| drm_display_info_set_bus_formats(&connector->display_info, | |
| &bus_format, 1); | |
| return 1; | |
| } | |
| static const struct drm_panel_funcs r63353_panel_funcs = { | |
| .prepare = r63353_panel_prepare, | |
| .unprepare = r63353_panel_unprepare, | |
| .get_modes = r63353_panel_get_modes, | |
| }; | |
| static int r63353_panel_probe(struct mipi_dsi_device *dsi) | |
| { | |
| int ret = 0; | |
| struct device *dev = &dsi->dev; | |
| struct r63353_panel *panel; | |
| panel = devm_drm_panel_alloc(dev, struct r63353_panel, base, | |
| &r63353_panel_funcs, | |
| DRM_MODE_CONNECTOR_DSI); | |
| if (IS_ERR(panel)) | |
| return PTR_ERR(panel); | |
| mipi_dsi_set_drvdata(dsi, panel); | |
| panel->dsi = dsi; | |
| panel->pdata = (struct r63353_desc *)of_device_get_match_data(dev); | |
| dev_info(dev, "Panel %s\n", panel->pdata->name); | |
| dsi->lanes = 2; | |
| dsi->format = MIPI_DSI_FMT_RGB888; | |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM | | |
| MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_NO_EOT_PACKET; | |
| panel->dvdd = devm_regulator_get(dev, "dvdd"); | |
| if (IS_ERR(panel->dvdd)) | |
| return PTR_ERR(panel->dvdd); | |
| panel->avdd = devm_regulator_get(dev, "avdd"); | |
| if (IS_ERR(panel->avdd)) | |
| return PTR_ERR(panel->avdd); | |
| panel->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(panel->reset_gpio)) { | |
| dev_err(dev, "failed to get RESET GPIO\n"); | |
| return PTR_ERR(panel->reset_gpio); | |
| } | |
| panel->base.prepare_prev_first = true; | |
| ret = drm_panel_of_backlight(&panel->base); | |
| if (ret) | |
| return ret; | |
| drm_panel_add(&panel->base); | |
| ret = mipi_dsi_attach(dsi); | |
| if (ret < 0) { | |
| dev_err(dev, "mipi_dsi_attach failed: %d\n", ret); | |
| drm_panel_remove(&panel->base); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static void r63353_panel_remove(struct mipi_dsi_device *dsi) | |
| { | |
| struct r63353_panel *rpanel = mipi_dsi_get_drvdata(dsi); | |
| struct device *dev = &dsi->dev; | |
| int ret; | |
| ret = mipi_dsi_detach(dsi); | |
| if (ret < 0) | |
| dev_err(dev, "Failed to detach from host (%d)\n", ret); | |
| drm_panel_remove(&rpanel->base); | |
| } | |
| static void r63353_panel_shutdown(struct mipi_dsi_device *dsi) | |
| { | |
| struct r63353_panel *rpanel = mipi_dsi_get_drvdata(dsi); | |
| drm_panel_unprepare(&rpanel->base); | |
| } | |
| static const struct r63353_desc sharp_ls068b3sx02_data = { | |
| .name = "Sharp LS068B3SX02", | |
| .mode = &sharp_ls068b3sx02_timing, | |
| .init = sharp_ls068b3sx02_init, | |
| .init_length = ARRAY_SIZE(sharp_ls068b3sx02_init), | |
| .width_mm = 68, | |
| .height_mm = 159, | |
| }; | |
| static const struct of_device_id r63353_of_match[] = { | |
| { .compatible = "sharp,ls068b3sx02", .data = &sharp_ls068b3sx02_data }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, r63353_of_match); | |
| static struct mipi_dsi_driver r63353_panel_driver = { | |
| .driver = { | |
| .name = "r63353-dsi", | |
| .of_match_table = r63353_of_match, | |
| }, | |
| .probe = r63353_panel_probe, | |
| .remove = r63353_panel_remove, | |
| .shutdown = r63353_panel_shutdown, | |
| }; | |
| module_mipi_dsi_driver(r63353_panel_driver); | |
| MODULE_AUTHOR("Matthias Proske <Matthias.Proske@bshg.com>"); | |
| MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>"); | |
| MODULE_DESCRIPTION("Synaptics R63353 Controller Driver"); | |
| MODULE_LICENSE("GPL"); |