| // SPDX-License-Identifier: GPL-2.0-only | |
| /* Copyright (c) 2021 Linaro Ltd. | |
| * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: | |
| * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <video/mipi_display.h> | |
| #include <drm/drm_mipi_dsi.h> | |
| #include <drm/drm_modes.h> | |
| #include <drm/drm_panel.h> | |
| struct sharp_ls060 { | |
| struct drm_panel panel; | |
| struct mipi_dsi_device *dsi; | |
| struct regulator *vddi_supply; | |
| struct regulator *vddh_supply; | |
| struct regulator *avdd_supply; | |
| struct regulator *avee_supply; | |
| struct gpio_desc *reset_gpio; | |
| }; | |
| static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel) | |
| { | |
| return container_of(panel, struct sharp_ls060, panel); | |
| } | |
| static void sharp_ls060_reset(struct sharp_ls060 *ctx) | |
| { | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); | |
| usleep_range(10000, 11000); | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); | |
| usleep_range(10000, 11000); | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); | |
| usleep_range(10000, 11000); | |
| } | |
| static int sharp_ls060_on(struct sharp_ls060 *ctx) | |
| { | |
| struct mipi_dsi_device *dsi = ctx->dsi; | |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; | |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; | |
| mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbb, 0x13); | |
| mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_MEMORY_START); | |
| mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx); | |
| mipi_dsi_msleep(&dsi_ctx, 120); | |
| mipi_dsi_dcs_set_display_on_multi(&dsi_ctx); | |
| mipi_dsi_msleep(&dsi_ctx, 50); | |
| return dsi_ctx.accum_err; | |
| } | |
| static void sharp_ls060_off(struct sharp_ls060 *ctx) | |
| { | |
| struct mipi_dsi_device *dsi = ctx->dsi; | |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; | |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; | |
| mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); | |
| mipi_dsi_usleep_range(&dsi_ctx, 2000, 3000); | |
| mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); | |
| mipi_dsi_msleep(&dsi_ctx, 121); | |
| } | |
| static int sharp_ls060_prepare(struct drm_panel *panel) | |
| { | |
| struct sharp_ls060 *ctx = to_sharp_ls060(panel); | |
| int ret; | |
| ret = regulator_enable(ctx->vddi_supply); | |
| if (ret < 0) | |
| return ret; | |
| ret = regulator_enable(ctx->avdd_supply); | |
| if (ret < 0) | |
| goto err_avdd; | |
| usleep_range(1000, 2000); | |
| ret = regulator_enable(ctx->avee_supply); | |
| if (ret < 0) | |
| goto err_avee; | |
| usleep_range(10000, 11000); | |
| ret = regulator_enable(ctx->vddh_supply); | |
| if (ret < 0) | |
| goto err_vddh; | |
| usleep_range(10000, 11000); | |
| sharp_ls060_reset(ctx); | |
| ret = sharp_ls060_on(ctx); | |
| if (ret < 0) | |
| goto err_on; | |
| return 0; | |
| err_on: | |
| regulator_disable(ctx->vddh_supply); | |
| usleep_range(10000, 11000); | |
| err_vddh: | |
| regulator_disable(ctx->avee_supply); | |
| err_avee: | |
| regulator_disable(ctx->avdd_supply); | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); | |
| err_avdd: | |
| regulator_disable(ctx->vddi_supply); | |
| return ret; | |
| } | |
| static int sharp_ls060_unprepare(struct drm_panel *panel) | |
| { | |
| struct sharp_ls060 *ctx = to_sharp_ls060(panel); | |
| sharp_ls060_off(ctx); | |
| regulator_disable(ctx->vddh_supply); | |
| usleep_range(10000, 11000); | |
| regulator_disable(ctx->avee_supply); | |
| regulator_disable(ctx->avdd_supply); | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); | |
| regulator_disable(ctx->vddi_supply); | |
| return 0; | |
| } | |
| static const struct drm_display_mode sharp_ls060_mode = { | |
| .clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000, | |
| .hdisplay = 1080, | |
| .hsync_start = 1080 + 96, | |
| .hsync_end = 1080 + 96 + 16, | |
| .htotal = 1080 + 96 + 16 + 64, | |
| .vdisplay = 1920, | |
| .vsync_start = 1920 + 4, | |
| .vsync_end = 1920 + 4 + 1, | |
| .vtotal = 1920 + 4 + 1 + 16, | |
| .width_mm = 75, | |
| .height_mm = 132, | |
| }; | |
| static int sharp_ls060_get_modes(struct drm_panel *panel, | |
| struct drm_connector *connector) | |
| { | |
| struct drm_display_mode *mode; | |
| mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode); | |
| if (!mode) | |
| return -ENOMEM; | |
| drm_mode_set_name(mode); | |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | |
| connector->display_info.width_mm = mode->width_mm; | |
| connector->display_info.height_mm = mode->height_mm; | |
| drm_mode_probed_add(connector, mode); | |
| return 1; | |
| } | |
| static const struct drm_panel_funcs sharp_ls060_panel_funcs = { | |
| .prepare = sharp_ls060_prepare, | |
| .unprepare = sharp_ls060_unprepare, | |
| .get_modes = sharp_ls060_get_modes, | |
| }; | |
| static int sharp_ls060_probe(struct mipi_dsi_device *dsi) | |
| { | |
| struct device *dev = &dsi->dev; | |
| struct sharp_ls060 *ctx; | |
| int ret; | |
| ctx = devm_drm_panel_alloc(dev, struct sharp_ls060, panel, | |
| &sharp_ls060_panel_funcs, | |
| DRM_MODE_CONNECTOR_DSI); | |
| if (IS_ERR(ctx)) | |
| return PTR_ERR(ctx); | |
| ctx->vddi_supply = devm_regulator_get(dev, "vddi"); | |
| if (IS_ERR(ctx->vddi_supply)) | |
| return PTR_ERR(ctx->vddi_supply); | |
| ctx->vddh_supply = devm_regulator_get(dev, "vddh"); | |
| if (IS_ERR(ctx->vddh_supply)) | |
| return PTR_ERR(ctx->vddh_supply); | |
| ctx->avdd_supply = devm_regulator_get(dev, "avdd"); | |
| if (IS_ERR(ctx->avdd_supply)) | |
| return PTR_ERR(ctx->avdd_supply); | |
| ctx->avee_supply = devm_regulator_get(dev, "avee"); | |
| if (IS_ERR(ctx->avee_supply)) | |
| return PTR_ERR(ctx->avee_supply); | |
| ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); | |
| if (IS_ERR(ctx->reset_gpio)) | |
| return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), | |
| "Failed to get reset-gpios\n"); | |
| ctx->dsi = dsi; | |
| mipi_dsi_set_drvdata(dsi, ctx); | |
| dsi->lanes = 4; | |
| dsi->format = MIPI_DSI_FMT_RGB888; | |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | | |
| MIPI_DSI_MODE_NO_EOT_PACKET | | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS; | |
| ret = drm_panel_of_backlight(&ctx->panel); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "Failed to get backlight\n"); | |
| drm_panel_add(&ctx->panel); | |
| ret = mipi_dsi_attach(dsi); | |
| if (ret < 0) { | |
| dev_err(dev, "Failed to attach to DSI host: %d\n", ret); | |
| drm_panel_remove(&ctx->panel); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void sharp_ls060_remove(struct mipi_dsi_device *dsi) | |
| { | |
| struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi); | |
| int ret; | |
| ret = mipi_dsi_detach(dsi); | |
| if (ret < 0) | |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); | |
| drm_panel_remove(&ctx->panel); | |
| } | |
| static const struct of_device_id sharp_ls060t1sx01_of_match[] = { | |
| { .compatible = "sharp,ls060t1sx01" }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match); | |
| static struct mipi_dsi_driver sharp_ls060_driver = { | |
| .probe = sharp_ls060_probe, | |
| .remove = sharp_ls060_remove, | |
| .driver = { | |
| .name = "panel-sharp-ls060t1sx01", | |
| .of_match_table = sharp_ls060t1sx01_of_match, | |
| }, | |
| }; | |
| module_mipi_dsi_driver(sharp_ls060_driver); | |
| MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>"); | |
| MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel"); | |
| MODULE_LICENSE("GPL v2"); |