| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) STMicroelectronics SA 2017 | |
| * | |
| * Authors: Philippe Cornu <philippe.cornu@st.com> | |
| * Yannick Fertre <yannick.fertre@st.com> | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <video/mipi_display.h> | |
| #include <drm/drm_mipi_dsi.h> | |
| #include <drm/drm_modes.h> | |
| #include <drm/drm_panel.h> | |
| /*** Manufacturer Command Set ***/ | |
| #define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */ | |
| #define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */ | |
| #define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */ | |
| #define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */ | |
| #define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */ | |
| #define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */ | |
| /* CMD2 P0 commands (Display Options and Power) */ | |
| #define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */ | |
| #define MCS_SGOPCTR 0x16 /* Source Bias Current */ | |
| #define MCS_SDCTR 0x1A /* Source Output Delay Time */ | |
| #define MCS_INVCTR 0x1B /* Inversion Type */ | |
| #define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */ | |
| #define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */ | |
| #define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */ | |
| #define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */ | |
| #define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */ | |
| #define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */ | |
| #define MCS_VCMCTR 0x46 /* VCOM Output Level Control */ | |
| #define MCS_SETVGN 0x52 /* VG M/S N Control */ | |
| #define MCS_SETVGP 0x54 /* VG M/S P Control */ | |
| #define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */ | |
| /* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */ | |
| #define GOA_VSTV1 0x00 | |
| #define GOA_VSTV2 0x07 | |
| #define GOA_VCLK1 0x0E | |
| #define GOA_VCLK2 0x17 | |
| #define GOA_VCLK_OPT1 0x20 | |
| #define GOA_BICLK1 0x2A | |
| #define GOA_BICLK2 0x37 | |
| #define GOA_BICLK3 0x44 | |
| #define GOA_BICLK4 0x4F | |
| #define GOA_BICLK_OPT1 0x5B | |
| #define GOA_BICLK_OPT2 0x60 | |
| #define MCS_GOA_GPO1 0x6D | |
| #define MCS_GOA_GPO2 0x71 | |
| #define MCS_GOA_EQ 0x74 | |
| #define MCS_GOA_CLK_GALLON 0x7C | |
| #define MCS_GOA_FS_SEL0 0x7E | |
| #define MCS_GOA_FS_SEL1 0x87 | |
| #define MCS_GOA_FS_SEL2 0x91 | |
| #define MCS_GOA_FS_SEL3 0x9B | |
| #define MCS_GOA_BS_SEL0 0xAC | |
| #define MCS_GOA_BS_SEL1 0xB5 | |
| #define MCS_GOA_BS_SEL2 0xBF | |
| #define MCS_GOA_BS_SEL3 0xC9 | |
| #define MCS_GOA_BS_SEL4 0xD3 | |
| /* CMD2 P3 commands (Gamma) */ | |
| #define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */ | |
| #define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */ | |
| struct rm68200 { | |
| struct device *dev; | |
| struct drm_panel panel; | |
| struct gpio_desc *reset_gpio; | |
| struct regulator *supply; | |
| }; | |
| static const struct drm_display_mode default_mode = { | |
| .clock = 54000, | |
| .hdisplay = 720, | |
| .hsync_start = 720 + 48, | |
| .hsync_end = 720 + 48 + 9, | |
| .htotal = 720 + 48 + 9 + 48, | |
| .vdisplay = 1280, | |
| .vsync_start = 1280 + 12, | |
| .vsync_end = 1280 + 12 + 5, | |
| .vtotal = 1280 + 12 + 5 + 12, | |
| .flags = 0, | |
| .width_mm = 68, | |
| .height_mm = 122, | |
| }; | |
| static inline struct rm68200 *panel_to_rm68200(struct drm_panel *panel) | |
| { | |
| return container_of(panel, struct rm68200, panel); | |
| } | |
| static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data, | |
| size_t len) | |
| { | |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); | |
| int err; | |
| err = mipi_dsi_dcs_write_buffer(dsi, data, len); | |
| if (err < 0) | |
| dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write buffer failed: %d\n", err); | |
| } | |
| static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value) | |
| { | |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); | |
| int err; | |
| err = mipi_dsi_dcs_write(dsi, cmd, &value, 1); | |
| if (err < 0) | |
| dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write failed: %d\n", err); | |
| } | |
| #define dcs_write_seq(ctx, seq...) \ | |
| ({ \ | |
| static const u8 d[] = { seq }; \ | |
| \ | |
| rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \ | |
| }) | |
| /* | |
| * This panel is not able to auto-increment all cmd addresses so for some of | |
| * them, we need to send them one by one... | |
| */ | |
| #define dcs_write_cmd_seq(ctx, cmd, seq...) \ | |
| ({ \ | |
| static const u8 d[] = { seq }; \ | |
| unsigned int i; \ | |
| \ | |
| for (i = 0; i < ARRAY_SIZE(d) ; i++) \ | |
| rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \ | |
| }) | |
| static void rm68200_init_sequence(struct rm68200 *ctx) | |
| { | |
| /* Enter CMD2 with page 0 */ | |
| dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P0); | |
| dcs_write_cmd_seq(ctx, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00); | |
| dcs_write_seq(ctx, MCS_BT2CTR, 0xE5); | |
| dcs_write_seq(ctx, MCS_SETAVDD, 0x0A); | |
| dcs_write_seq(ctx, MCS_SETAVEE, 0x0A); | |
| dcs_write_seq(ctx, MCS_SGOPCTR, 0x52); | |
| dcs_write_seq(ctx, MCS_BT3CTR, 0x53); | |
| dcs_write_seq(ctx, MCS_BT4CTR, 0x5A); | |
| dcs_write_seq(ctx, MCS_INVCTR, 0x00); | |
| dcs_write_seq(ctx, MCS_STBCTR, 0x0A); | |
| dcs_write_seq(ctx, MCS_SDCTR, 0x06); | |
| dcs_write_seq(ctx, MCS_VCMCTR, 0x56); | |
| dcs_write_seq(ctx, MCS_SETVGN, 0xA0, 0x00); | |
| dcs_write_seq(ctx, MCS_SETVGP, 0xA0, 0x00); | |
| dcs_write_seq(ctx, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */ | |
| dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P2); | |
| dcs_write_seq(ctx, GOA_VSTV1, 0x05); | |
| dcs_write_seq(ctx, 0x02, 0x0B); | |
| dcs_write_seq(ctx, 0x03, 0x0F); | |
| dcs_write_seq(ctx, 0x04, 0x7D, 0x00, 0x50); | |
| dcs_write_cmd_seq(ctx, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00, | |
| 0x50); | |
| dcs_write_cmd_seq(ctx, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D, | |
| 0x00, 0x85, 0x08); | |
| dcs_write_cmd_seq(ctx, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D, | |
| 0x00, 0x85, 0x08); | |
| dcs_write_seq(ctx, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x00); | |
| dcs_write_cmd_seq(ctx, GOA_BICLK1, 0x07, 0x08); | |
| dcs_write_seq(ctx, 0x2D, 0x01); | |
| dcs_write_seq(ctx, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D, | |
| 0x00); | |
| dcs_write_cmd_seq(ctx, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00); | |
| dcs_write_seq(ctx, 0x3D, 0x40); | |
| dcs_write_seq(ctx, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00); | |
| dcs_write_seq(ctx, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, 0x00); | |
| dcs_write_seq(ctx, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00); | |
| dcs_write_seq(ctx, 0x58, 0x00, 0x00, 0x00); | |
| dcs_write_seq(ctx, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00); | |
| dcs_write_seq(ctx, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); | |
| dcs_write_seq(ctx, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00); | |
| dcs_write_seq(ctx, MCS_GOA_GPO2, 0x00, 0x20, 0x00); | |
| dcs_write_seq(ctx, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, | |
| 0x00, 0x00); | |
| dcs_write_seq(ctx, MCS_GOA_CLK_GALLON, 0x00, 0x00); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10, | |
| 0x16, 0x12, 0x08, 0x3F); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C, | |
| 0x0A, 0x0E, 0x3F, 0x3F, 0x00); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F, | |
| 0x05, 0x01, 0x3F, 0x3F, 0x0F); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F, | |
| 0x3F); | |
| dcs_write_cmd_seq(ctx, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15); | |
| dcs_write_cmd_seq(ctx, 0xA9, 0x07, 0x03, 0x3F); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13, | |
| 0x15, 0x11, 0x0F, 0x3F); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B, | |
| 0x0D, 0x09, 0x3F, 0x3F, 0x07); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F, | |
| 0x02, 0x06, 0x3F, 0x3F, 0x08); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F, | |
| 0x3F, 0x3F, 0x0E, 0x10, 0x14); | |
| dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F); | |
| dcs_write_seq(ctx, 0xDC, 0x02); | |
| dcs_write_seq(ctx, 0xDE, 0x12); | |
| dcs_write_seq(ctx, MCS_CMD_MODE_SW, 0x0E); /* No documentation */ | |
| dcs_write_seq(ctx, 0x01, 0x75); | |
| dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P3); | |
| dcs_write_cmd_seq(ctx, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06, | |
| 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, | |
| 0x12, 0x0C, 0x00); | |
| dcs_write_cmd_seq(ctx, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06, | |
| 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, | |
| 0x12, 0x0C, 0x00); | |
| /* Exit CMD2 */ | |
| dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD1_UCS); | |
| } | |
| static int rm68200_unprepare(struct drm_panel *panel) | |
| { | |
| struct rm68200 *ctx = panel_to_rm68200(panel); | |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); | |
| int ret; | |
| ret = mipi_dsi_dcs_set_display_off(dsi); | |
| if (ret) | |
| dev_warn(panel->dev, "failed to set display off: %d\n", ret); | |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); | |
| if (ret) | |
| dev_warn(panel->dev, "failed to enter sleep mode: %d\n", ret); | |
| msleep(120); | |
| if (ctx->reset_gpio) { | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); | |
| msleep(20); | |
| } | |
| regulator_disable(ctx->supply); | |
| return 0; | |
| } | |
| static int rm68200_prepare(struct drm_panel *panel) | |
| { | |
| struct rm68200 *ctx = panel_to_rm68200(panel); | |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); | |
| int ret; | |
| ret = regulator_enable(ctx->supply); | |
| if (ret < 0) { | |
| dev_err(ctx->dev, "failed to enable supply: %d\n", ret); | |
| return ret; | |
| } | |
| if (ctx->reset_gpio) { | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); | |
| msleep(20); | |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); | |
| msleep(100); | |
| } | |
| rm68200_init_sequence(ctx); | |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); | |
| if (ret) | |
| return ret; | |
| msleep(125); | |
| ret = mipi_dsi_dcs_set_display_on(dsi); | |
| if (ret) | |
| return ret; | |
| msleep(20); | |
| return 0; | |
| } | |
| static int rm68200_get_modes(struct drm_panel *panel, | |
| struct drm_connector *connector) | |
| { | |
| struct drm_display_mode *mode; | |
| mode = drm_mode_duplicate(connector->dev, &default_mode); | |
| if (!mode) { | |
| dev_err(panel->dev, "failed to add mode %ux%u@%u\n", | |
| default_mode.hdisplay, default_mode.vdisplay, | |
| drm_mode_vrefresh(&default_mode)); | |
| return -ENOMEM; | |
| } | |
| drm_mode_set_name(mode); | |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | |
| drm_mode_probed_add(connector, mode); | |
| connector->display_info.width_mm = mode->width_mm; | |
| connector->display_info.height_mm = mode->height_mm; | |
| return 1; | |
| } | |
| static const struct drm_panel_funcs rm68200_drm_funcs = { | |
| .unprepare = rm68200_unprepare, | |
| .prepare = rm68200_prepare, | |
| .get_modes = rm68200_get_modes, | |
| }; | |
| static int rm68200_probe(struct mipi_dsi_device *dsi) | |
| { | |
| struct device *dev = &dsi->dev; | |
| struct rm68200 *ctx; | |
| int ret; | |
| ctx = devm_drm_panel_alloc(dev, struct rm68200, panel, | |
| &rm68200_drm_funcs, | |
| DRM_MODE_CONNECTOR_DSI); | |
| if (IS_ERR(ctx)) | |
| return PTR_ERR(ctx); | |
| ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(ctx->reset_gpio)) { | |
| ret = PTR_ERR(ctx->reset_gpio); | |
| dev_err(dev, "cannot get reset GPIO: %d\n", ret); | |
| return ret; | |
| } | |
| ctx->supply = devm_regulator_get(dev, "power"); | |
| if (IS_ERR(ctx->supply)) { | |
| ret = PTR_ERR(ctx->supply); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(dev, "cannot get regulator: %d\n", ret); | |
| return ret; | |
| } | |
| mipi_dsi_set_drvdata(dsi, ctx); | |
| ctx->dev = dev; | |
| dsi->lanes = 2; | |
| dsi->format = MIPI_DSI_FMT_RGB888; | |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | | |
| MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS; | |
| ret = drm_panel_of_backlight(&ctx->panel); | |
| if (ret) | |
| return ret; | |
| drm_panel_add(&ctx->panel); | |
| ret = mipi_dsi_attach(dsi); | |
| if (ret < 0) { | |
| dev_err(dev, "mipi_dsi_attach() failed: %d\n", ret); | |
| drm_panel_remove(&ctx->panel); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void rm68200_remove(struct mipi_dsi_device *dsi) | |
| { | |
| struct rm68200 *ctx = mipi_dsi_get_drvdata(dsi); | |
| mipi_dsi_detach(dsi); | |
| drm_panel_remove(&ctx->panel); | |
| } | |
| static const struct of_device_id raydium_rm68200_of_match[] = { | |
| { .compatible = "raydium,rm68200" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, raydium_rm68200_of_match); | |
| static struct mipi_dsi_driver raydium_rm68200_driver = { | |
| .probe = rm68200_probe, | |
| .remove = rm68200_remove, | |
| .driver = { | |
| .name = "panel-raydium-rm68200", | |
| .of_match_table = raydium_rm68200_of_match, | |
| }, | |
| }; | |
| module_mipi_dsi_driver(raydium_rm68200_driver); | |
| MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>"); | |
| MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>"); | |
| MODULE_DESCRIPTION("DRM Driver for Raydium RM68200 MIPI DSI panel"); | |
| MODULE_LICENSE("GPL v2"); |