| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright 2010 Matt Turner. | |
| * Copyright 2012 Red Hat | |
| * | |
| * Authors: Matthew Garrett | |
| * Matt Turner | |
| * Dave Airlie | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/iosys-map.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_color_mgmt.h> | |
| #include <drm/drm_damage_helper.h> | |
| #include <drm/drm_edid.h> | |
| #include <drm/drm_format_helper.h> | |
| #include <drm/drm_fourcc.h> | |
| #include <drm/drm_framebuffer.h> | |
| #include <drm/drm_gem_atomic_helper.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include <drm/drm_panic.h> | |
| #include <drm/drm_print.h> | |
| #include "mgag200_ddc.h" | |
| #include "mgag200_drv.h" | |
| /* | |
| * This file contains setup code for the CRTC. | |
| */ | |
| static void mgag200_set_gamma_lut(struct drm_crtc *crtc, unsigned int index, | |
| u16 red, u16 green, u16 blue) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| u8 i8 = index & 0xff; | |
| u8 r8 = red >> 8; | |
| u8 g8 = green >> 8; | |
| u8 b8 = blue >> 8; | |
| if (drm_WARN_ON_ONCE(dev, index != i8)) | |
| return; /* driver bug */ | |
| WREG8(DAC_INDEX + MGA1064_INDEX, i8); | |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, r8); | |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, g8); | |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, b8); | |
| } | |
| void mgag200_crtc_fill_gamma(struct mga_device *mdev, | |
| const struct drm_format_info *format) | |
| { | |
| struct drm_crtc *crtc = &mdev->crtc; | |
| switch (format->format) { | |
| case DRM_FORMAT_C8: | |
| drm_crtc_fill_palette_8(crtc, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_XRGB1555: | |
| drm_crtc_fill_gamma_555(crtc, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_RGB565: | |
| drm_crtc_fill_gamma_565(crtc, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_RGB888: | |
| case DRM_FORMAT_XRGB8888: | |
| drm_crtc_fill_gamma_888(crtc, mgag200_set_gamma_lut); | |
| break; | |
| default: | |
| drm_warn_once(&mdev->base, "Unsupported format %p4cc for gamma correction\n", | |
| &format->format); | |
| break; | |
| } | |
| } | |
| void mgag200_crtc_load_gamma(struct mga_device *mdev, | |
| const struct drm_format_info *format, | |
| struct drm_color_lut *lut) | |
| { | |
| struct drm_crtc *crtc = &mdev->crtc; | |
| switch (format->format) { | |
| case DRM_FORMAT_C8: | |
| drm_crtc_load_palette_8(crtc, lut, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_XRGB1555: | |
| drm_crtc_load_gamma_555_from_888(crtc, lut, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_RGB565: | |
| drm_crtc_load_gamma_565_from_888(crtc, lut, mgag200_set_gamma_lut); | |
| break; | |
| case DRM_FORMAT_RGB888: | |
| case DRM_FORMAT_XRGB8888: | |
| drm_crtc_load_gamma_888(crtc, lut, mgag200_set_gamma_lut); | |
| break; | |
| default: | |
| drm_warn_once(&mdev->base, "Unsupported format %p4cc for gamma correction\n", | |
| &format->format); | |
| break; | |
| } | |
| } | |
| static inline void mga_wait_vsync(struct mga_device *mdev) | |
| { | |
| unsigned long timeout = jiffies + HZ/10; | |
| unsigned int status = 0; | |
| do { | |
| status = RREG32(MGAREG_STATUS); | |
| } while ((status & 0x08) && time_before(jiffies, timeout)); | |
| timeout = jiffies + HZ/10; | |
| status = 0; | |
| do { | |
| status = RREG32(MGAREG_STATUS); | |
| } while (!(status & 0x08) && time_before(jiffies, timeout)); | |
| } | |
| static inline void mga_wait_busy(struct mga_device *mdev) | |
| { | |
| unsigned long timeout = jiffies + HZ; | |
| unsigned int status = 0; | |
| do { | |
| status = RREG8(MGAREG_STATUS + 2); | |
| } while ((status & 0x01) && time_before(jiffies, timeout)); | |
| } | |
| /* | |
| * This is how the framebuffer base address is stored in g200 cards: | |
| * * Assume @offset is the gpu_addr variable of the framebuffer object | |
| * * Then addr is the number of _pixels_ (not bytes) from the start of | |
| * VRAM to the first pixel we want to display. (divided by 2 for 32bit | |
| * framebuffers) | |
| * * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers | |
| * addr<20> -> CRTCEXT0<6> | |
| * addr<19-16> -> CRTCEXT0<3-0> | |
| * addr<15-8> -> CRTCC<7-0> | |
| * addr<7-0> -> CRTCD<7-0> | |
| * | |
| * CRTCEXT0 has to be programmed last to trigger an update and make the | |
| * new addr variable take effect. | |
| */ | |
| static void mgag200_set_startadd(struct mga_device *mdev, | |
| unsigned long offset) | |
| { | |
| struct drm_device *dev = &mdev->base; | |
| u32 startadd; | |
| u8 crtcc, crtcd, crtcext0; | |
| startadd = offset / 8; | |
| if (startadd > 0) | |
| drm_WARN_ON_ONCE(dev, mdev->info->bug_no_startadd); | |
| /* | |
| * Can't store addresses any higher than that, but we also | |
| * don't have more than 16 MiB of memory, so it should be fine. | |
| */ | |
| drm_WARN_ON(dev, startadd > 0x1fffff); | |
| RREG_ECRT(0x00, crtcext0); | |
| crtcc = (startadd >> 8) & 0xff; | |
| crtcd = startadd & 0xff; | |
| crtcext0 &= 0xb0; | |
| crtcext0 |= ((startadd >> 14) & BIT(6)) | | |
| ((startadd >> 16) & 0x0f); | |
| WREG_CRT(0x0c, crtcc); | |
| WREG_CRT(0x0d, crtcd); | |
| WREG_ECRT(0x00, crtcext0); | |
| } | |
| /* | |
| * Set the opmode for the hardware swapper for Big-Endian processor | |
| * support for the frame buffer aperture and DMAWIN space. | |
| */ | |
| static void mgag200_set_datasiz(struct mga_device *mdev, u32 format) | |
| { | |
| #if defined(__BIG_ENDIAN) | |
| u32 opmode = RREG32(MGAREG_OPMODE); | |
| opmode &= ~(GENMASK(17, 16) | GENMASK(9, 8) | GENMASK(3, 2)); | |
| /* Big-endian byte-swapping */ | |
| switch (format) { | |
| case DRM_FORMAT_XRGB1555: | |
| case DRM_FORMAT_RGB565: | |
| opmode |= 0x10100; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| opmode |= 0x20200; | |
| break; | |
| } | |
| WREG32(MGAREG_OPMODE, opmode); | |
| #endif | |
| } | |
| void mgag200_init_registers(struct mga_device *mdev) | |
| { | |
| u8 crtc11, misc; | |
| WREG_SEQ(2, 0x0f); | |
| WREG_SEQ(3, 0x00); | |
| WREG_SEQ(4, 0x0e); | |
| WREG_CRT(10, 0); | |
| WREG_CRT(11, 0); | |
| WREG_CRT(12, 0); | |
| WREG_CRT(13, 0); | |
| WREG_CRT(14, 0); | |
| WREG_CRT(15, 0); | |
| RREG_CRT(0x11, crtc11); | |
| crtc11 &= ~(MGAREG_CRTC11_CRTCPROTECT | | |
| MGAREG_CRTC11_VINTEN | | |
| MGAREG_CRTC11_VINTCLR); | |
| WREG_CRT(0x11, crtc11); | |
| misc = RREG8(MGA_MISC_IN); | |
| misc |= MGAREG_MISC_IOADSEL; | |
| WREG8(MGA_MISC_OUT, misc); | |
| } | |
| void mgag200_set_mode_regs(struct mga_device *mdev, const struct drm_display_mode *mode, | |
| bool set_vidrst) | |
| { | |
| unsigned int hdispend, hsyncstr, hsyncend, htotal, hblkstr, hblkend; | |
| unsigned int vdispend, vsyncstr, vsyncend, vtotal, vblkstr, vblkend; | |
| unsigned int linecomp; | |
| u8 misc, crtcext1, crtcext2, crtcext5; | |
| hdispend = mode->crtc_hdisplay / 8 - 1; | |
| hsyncstr = mode->crtc_hsync_start / 8 - 1; | |
| hsyncend = mode->crtc_hsync_end / 8 - 1; | |
| htotal = mode->crtc_htotal / 8 - 1; | |
| /* Work around hardware quirk */ | |
| if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04) | |
| htotal++; | |
| hblkstr = mode->crtc_hblank_start / 8 - 1; | |
| hblkend = htotal; | |
| vdispend = mode->crtc_vdisplay - 1; | |
| vsyncstr = mode->crtc_vsync_start - 1; | |
| vsyncend = mode->crtc_vsync_end - 1; | |
| vtotal = mode->crtc_vtotal - 2; | |
| vblkstr = mode->crtc_vblank_start - 1; | |
| vblkend = vtotal + 1; | |
| linecomp = vdispend; | |
| misc = RREG8(MGA_MISC_IN); | |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) | |
| misc |= MGAREG_MISC_HSYNCPOL; | |
| else | |
| misc &= ~MGAREG_MISC_HSYNCPOL; | |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) | |
| misc |= MGAREG_MISC_VSYNCPOL; | |
| else | |
| misc &= ~MGAREG_MISC_VSYNCPOL; | |
| crtcext1 = (((htotal - 4) & 0x100) >> 8) | | |
| ((hblkstr & 0x100) >> 7) | | |
| ((hsyncstr & 0x100) >> 6) | | |
| (hblkend & 0x40); | |
| if (set_vidrst) | |
| crtcext1 |= MGAREG_CRTCEXT1_VRSTEN | | |
| MGAREG_CRTCEXT1_HRSTEN; | |
| crtcext2 = ((vtotal & 0xc00) >> 10) | | |
| ((vdispend & 0x400) >> 8) | | |
| ((vblkstr & 0xc00) >> 7) | | |
| ((vsyncstr & 0xc00) >> 5) | | |
| ((linecomp & 0x400) >> 3); | |
| crtcext5 = 0x00; | |
| WREG_CRT(0x00, htotal - 4); | |
| WREG_CRT(0x01, hdispend); | |
| WREG_CRT(0x02, hblkstr); | |
| WREG_CRT(0x03, (hblkend & 0x1f) | 0x80); | |
| WREG_CRT(0x04, hsyncstr); | |
| WREG_CRT(0x05, ((hblkend & 0x20) << 2) | (hsyncend & 0x1f)); | |
| WREG_CRT(0x06, vtotal & 0xff); | |
| WREG_CRT(0x07, ((vtotal & 0x100) >> 8) | | |
| ((vdispend & 0x100) >> 7) | | |
| ((vsyncstr & 0x100) >> 6) | | |
| ((vblkstr & 0x100) >> 5) | | |
| ((linecomp & 0x100) >> 4) | | |
| ((vtotal & 0x200) >> 4) | | |
| ((vdispend & 0x200) >> 3) | | |
| ((vsyncstr & 0x200) >> 2)); | |
| WREG_CRT(0x09, ((vblkstr & 0x200) >> 4) | | |
| ((linecomp & 0x200) >> 3)); | |
| WREG_CRT(0x10, vsyncstr & 0xff); | |
| WREG_CRT(0x11, (vsyncend & 0x0f) | 0x20); | |
| WREG_CRT(0x12, vdispend & 0xff); | |
| WREG_CRT(0x14, 0); | |
| WREG_CRT(0x15, vblkstr & 0xff); | |
| WREG_CRT(0x16, vblkend & 0xff); | |
| WREG_CRT(0x17, 0xc3); | |
| WREG_CRT(0x18, linecomp & 0xff); | |
| WREG_ECRT(0x01, crtcext1); | |
| WREG_ECRT(0x02, crtcext2); | |
| WREG_ECRT(0x05, crtcext5); | |
| WREG8(MGA_MISC_OUT, misc); | |
| } | |
| static void mgag200_set_offset(struct mga_device *mdev, | |
| const struct drm_framebuffer *fb) | |
| { | |
| u8 crtc13, crtcext0; | |
| u32 offset = fb->pitches[0] / 16; | |
| RREG_ECRT(0, crtcext0); | |
| crtc13 = offset & 0xff; | |
| crtcext0 &= ~MGAREG_CRTCEXT0_OFFSET_MASK; | |
| crtcext0 |= (offset >> 4) & MGAREG_CRTCEXT0_OFFSET_MASK; | |
| WREG_CRT(0x13, crtc13); | |
| WREG_ECRT(0x00, crtcext0); | |
| } | |
| void mgag200_set_format_regs(struct mga_device *mdev, const struct drm_format_info *format) | |
| { | |
| u8 xmulctrl = 0; | |
| u8 crtcext3; | |
| RREG_ECRT(3, crtcext3); | |
| switch (format->format) { | |
| case DRM_FORMAT_C8: | |
| crtcext3 &= ~MGAREG_CRTCEXT3_SCALE_MASK; | |
| crtcext3 |= 0x0; | |
| break; | |
| case DRM_FORMAT_XRGB1555: | |
| case DRM_FORMAT_RGB565: | |
| crtcext3 &= ~MGAREG_CRTCEXT3_SCALE_MASK; | |
| crtcext3 |= 0x01; | |
| break; | |
| case DRM_FORMAT_RGB888: | |
| crtcext3 &= ~MGAREG_CRTCEXT3_SCALE_MASK; | |
| crtcext3 |= 0x02; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| crtcext3 &= ~MGAREG_CRTCEXT3_SCALE_MASK; | |
| crtcext3 |= 0x03; | |
| break; | |
| } | |
| switch (format->format) { | |
| case DRM_FORMAT_C8: | |
| xmulctrl = MGA1064_MUL_CTL_8bits; | |
| break; | |
| case DRM_FORMAT_XRGB1555: | |
| xmulctrl = MGA1064_MUL_CTL_15bits; | |
| break; | |
| case DRM_FORMAT_RGB565: | |
| xmulctrl = MGA1064_MUL_CTL_16bits; | |
| break; | |
| case DRM_FORMAT_RGB888: | |
| xmulctrl = MGA1064_MUL_CTL_24bits; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| xmulctrl = MGA1064_MUL_CTL_32_24bits; | |
| break; | |
| } | |
| WREG_DAC(MGA1064_MUL_CTL, xmulctrl); | |
| WREG_GFX(0, 0x00); | |
| WREG_GFX(1, 0x00); | |
| WREG_GFX(2, 0x00); | |
| WREG_GFX(3, 0x00); | |
| WREG_GFX(4, 0x00); | |
| WREG_GFX(5, 0x40); | |
| /* GCTL6 should be 0x05, but we configure memmapsl to 0xb8000 (text mode), | |
| * so that it doesn't hang when running kexec/kdump on G200_SE rev42. | |
| */ | |
| WREG_GFX(6, 0x0d); | |
| WREG_GFX(7, 0x0f); | |
| WREG_GFX(8, 0x0f); | |
| WREG_ECRT(3, crtcext3); | |
| } | |
| void mgag200_enable_display(struct mga_device *mdev) | |
| { | |
| u8 seq0, crtcext1; | |
| RREG_SEQ(0x00, seq0); | |
| seq0 |= MGAREG_SEQ0_SYNCRST | | |
| MGAREG_SEQ0_ASYNCRST; | |
| WREG_SEQ(0x00, seq0); | |
| /* | |
| * TODO: replace busy waiting with vblank IRQ; put | |
| * msleep(50) before changing SCROFF | |
| */ | |
| mga_wait_vsync(mdev); | |
| mga_wait_busy(mdev); | |
| RREG_ECRT(0x01, crtcext1); | |
| crtcext1 &= ~MGAREG_CRTCEXT1_VSYNCOFF; | |
| crtcext1 &= ~MGAREG_CRTCEXT1_HSYNCOFF; | |
| WREG_ECRT(0x01, crtcext1); | |
| } | |
| static void mgag200_disable_display(struct mga_device *mdev) | |
| { | |
| u8 seq0, crtcext1; | |
| RREG_SEQ(0x00, seq0); | |
| seq0 &= ~MGAREG_SEQ0_SYNCRST; | |
| WREG_SEQ(0x00, seq0); | |
| /* | |
| * TODO: replace busy waiting with vblank IRQ; put | |
| * msleep(50) before changing SCROFF | |
| */ | |
| mga_wait_vsync(mdev); | |
| mga_wait_busy(mdev); | |
| RREG_ECRT(0x01, crtcext1); | |
| crtcext1 |= MGAREG_CRTCEXT1_VSYNCOFF | | |
| MGAREG_CRTCEXT1_HSYNCOFF; | |
| WREG_ECRT(0x01, crtcext1); | |
| } | |
| static void mgag200_handle_damage(struct mga_device *mdev, const struct iosys_map *vmap, | |
| struct drm_framebuffer *fb, struct drm_rect *clip) | |
| { | |
| struct iosys_map dst = IOSYS_MAP_INIT_VADDR_IOMEM(mdev->vram); | |
| iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); | |
| drm_fb_memcpy(&dst, fb->pitches, vmap, fb, clip); | |
| } | |
| /* | |
| * Primary plane | |
| */ | |
| const uint32_t mgag200_primary_plane_formats[] = { | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_RGB565, | |
| DRM_FORMAT_XRGB1555, | |
| DRM_FORMAT_RGB888, | |
| DRM_FORMAT_C8, | |
| }; | |
| const size_t mgag200_primary_plane_formats_size = ARRAY_SIZE(mgag200_primary_plane_formats); | |
| const uint64_t mgag200_primary_plane_fmtmods[] = { | |
| DRM_FORMAT_MOD_LINEAR, | |
| DRM_FORMAT_MOD_INVALID | |
| }; | |
| int mgag200_primary_plane_helper_atomic_check(struct drm_plane *plane, | |
| struct drm_atomic_commit *new_state) | |
| { | |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(new_state, plane); | |
| struct drm_framebuffer *new_fb = new_plane_state->fb; | |
| struct drm_framebuffer *fb = NULL; | |
| struct drm_crtc *new_crtc = new_plane_state->crtc; | |
| struct drm_crtc_state *new_crtc_state = NULL; | |
| struct mgag200_crtc_state *new_mgag200_crtc_state; | |
| int ret; | |
| if (new_crtc) | |
| new_crtc_state = drm_atomic_get_new_crtc_state(new_state, new_crtc); | |
| ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, | |
| DRM_PLANE_NO_SCALING, | |
| DRM_PLANE_NO_SCALING, | |
| false, true); | |
| if (ret) | |
| return ret; | |
| else if (!new_plane_state->visible) | |
| return 0; | |
| if (plane->state) | |
| fb = plane->state->fb; | |
| if (!fb || (fb->format != new_fb->format)) | |
| new_crtc_state->mode_changed = true; /* update PLL settings */ | |
| new_mgag200_crtc_state = to_mgag200_crtc_state(new_crtc_state); | |
| new_mgag200_crtc_state->format = new_fb->format; | |
| return 0; | |
| } | |
| void mgag200_primary_plane_helper_atomic_update(struct drm_plane *plane, | |
| struct drm_atomic_commit *old_state) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| struct drm_plane_state *plane_state = plane->state; | |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(old_state, plane); | |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); | |
| struct drm_framebuffer *fb = plane_state->fb; | |
| struct drm_atomic_helper_damage_iter iter; | |
| struct drm_rect damage; | |
| mgag200_set_datasiz(mdev, fb->format->format); | |
| drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); | |
| drm_atomic_for_each_plane_damage(&iter, &damage) { | |
| mgag200_handle_damage(mdev, shadow_plane_state->data, fb, &damage); | |
| } | |
| /* Always scanout image at VRAM offset 0 */ | |
| mgag200_set_startadd(mdev, (u32)0); | |
| mgag200_set_offset(mdev, fb); | |
| } | |
| void mgag200_primary_plane_helper_atomic_enable(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| u8 seq1; | |
| RREG_SEQ(0x01, seq1); | |
| seq1 &= ~MGAREG_SEQ1_SCROFF; | |
| WREG_SEQ(0x01, seq1); | |
| msleep(20); | |
| } | |
| void mgag200_primary_plane_helper_atomic_disable(struct drm_plane *plane, | |
| struct drm_atomic_commit *old_state) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| u8 seq1; | |
| RREG_SEQ(0x01, seq1); | |
| seq1 |= MGAREG_SEQ1_SCROFF; | |
| WREG_SEQ(0x01, seq1); | |
| msleep(20); | |
| } | |
| int mgag200_primary_plane_helper_get_scanout_buffer(struct drm_plane *plane, | |
| struct drm_scanout_buffer *sb) | |
| { | |
| struct mga_device *mdev = to_mga_device(plane->dev); | |
| struct iosys_map map = IOSYS_MAP_INIT_VADDR_IOMEM(mdev->vram); | |
| if (plane->state && plane->state->fb) { | |
| sb->format = plane->state->fb->format; | |
| sb->width = plane->state->fb->width; | |
| sb->height = plane->state->fb->height; | |
| sb->pitch[0] = plane->state->fb->pitches[0]; | |
| sb->map[0] = map; | |
| return 0; | |
| } | |
| return -ENODEV; | |
| } | |
| /* | |
| * CRTC | |
| */ | |
| enum drm_mode_status mgag200_crtc_helper_mode_valid(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct mga_device *mdev = to_mga_device(crtc->dev); | |
| const struct mgag200_device_info *info = mdev->info; | |
| /* | |
| * Some devices have additional limits on the size of the | |
| * display mode. | |
| */ | |
| if (mode->hdisplay > info->max_hdisplay) | |
| return MODE_VIRTUAL_X; | |
| if (mode->vdisplay > info->max_vdisplay) | |
| return MODE_VIRTUAL_Y; | |
| if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 || | |
| (mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) { | |
| return MODE_H_ILLEGAL; | |
| } | |
| if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 || | |
| mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 || | |
| mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 || | |
| mode->crtc_vsync_end > 4096 || mode->crtc_vtotal > 4096) { | |
| return MODE_BAD; | |
| } | |
| return MODE_OK; | |
| } | |
| int mgag200_crtc_helper_atomic_check(struct drm_crtc *crtc, struct drm_atomic_commit *new_state) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| const struct mgag200_device_funcs *funcs = mdev->funcs; | |
| struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(new_state, crtc); | |
| struct drm_property_blob *new_gamma_lut = new_crtc_state->gamma_lut; | |
| int ret; | |
| if (!new_crtc_state->enable) | |
| return 0; | |
| ret = drm_atomic_helper_check_crtc_primary_plane(new_crtc_state); | |
| if (ret) | |
| return ret; | |
| if (new_crtc_state->mode_changed) { | |
| if (funcs->pixpllc_atomic_check) { | |
| ret = funcs->pixpllc_atomic_check(crtc, new_state); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| if (new_crtc_state->color_mgmt_changed && new_gamma_lut) { | |
| if (new_gamma_lut->length != MGAG200_LUT_SIZE * sizeof(struct drm_color_lut)) { | |
| drm_dbg(dev, "Wrong size for gamma_lut %zu\n", new_gamma_lut->length); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| void mgag200_crtc_helper_atomic_flush(struct drm_crtc *crtc, struct drm_atomic_commit *old_state) | |
| { | |
| struct drm_crtc_state *crtc_state = crtc->state; | |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); | |
| struct drm_device *dev = crtc->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| if (crtc_state->enable && crtc_state->color_mgmt_changed) { | |
| const struct drm_format_info *format = mgag200_crtc_state->format; | |
| if (crtc_state->gamma_lut) | |
| mgag200_crtc_load_gamma(mdev, format, crtc_state->gamma_lut->data); | |
| else | |
| mgag200_crtc_fill_gamma(mdev, format); | |
| } | |
| } | |
| void mgag200_crtc_helper_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_commit *old_state) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct mga_device *mdev = to_mga_device(dev); | |
| const struct mgag200_device_funcs *funcs = mdev->funcs; | |
| struct drm_crtc_state *crtc_state = crtc->state; | |
| struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; | |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); | |
| const struct drm_format_info *format = mgag200_crtc_state->format; | |
| mgag200_set_format_regs(mdev, format); | |
| mgag200_set_mode_regs(mdev, adjusted_mode, mgag200_crtc_state->set_vidrst); | |
| if (funcs->pixpllc_atomic_update) | |
| funcs->pixpllc_atomic_update(crtc, old_state); | |
| if (crtc_state->gamma_lut) | |
| mgag200_crtc_load_gamma(mdev, format, crtc_state->gamma_lut->data); | |
| else | |
| mgag200_crtc_fill_gamma(mdev, format); | |
| mgag200_enable_display(mdev); | |
| } | |
| void mgag200_crtc_helper_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_commit *old_state) | |
| { | |
| struct mga_device *mdev = to_mga_device(crtc->dev); | |
| mgag200_disable_display(mdev); | |
| } | |
| void mgag200_crtc_reset(struct drm_crtc *crtc) | |
| { | |
| struct mgag200_crtc_state *mgag200_crtc_state; | |
| if (crtc->state) | |
| crtc->funcs->atomic_destroy_state(crtc, crtc->state); | |
| mgag200_crtc_state = kzalloc_obj(*mgag200_crtc_state); | |
| if (mgag200_crtc_state) | |
| __drm_atomic_helper_crtc_reset(crtc, &mgag200_crtc_state->base); | |
| else | |
| __drm_atomic_helper_crtc_reset(crtc, NULL); | |
| } | |
| struct drm_crtc_state *mgag200_crtc_atomic_duplicate_state(struct drm_crtc *crtc) | |
| { | |
| struct drm_crtc_state *crtc_state = crtc->state; | |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); | |
| struct mgag200_crtc_state *new_mgag200_crtc_state; | |
| if (!crtc_state) | |
| return NULL; | |
| new_mgag200_crtc_state = kzalloc_obj(*new_mgag200_crtc_state); | |
| if (!new_mgag200_crtc_state) | |
| return NULL; | |
| __drm_atomic_helper_crtc_duplicate_state(crtc, &new_mgag200_crtc_state->base); | |
| new_mgag200_crtc_state->format = mgag200_crtc_state->format; | |
| memcpy(&new_mgag200_crtc_state->pixpllc, &mgag200_crtc_state->pixpllc, | |
| sizeof(new_mgag200_crtc_state->pixpllc)); | |
| new_mgag200_crtc_state->set_vidrst = mgag200_crtc_state->set_vidrst; | |
| return &new_mgag200_crtc_state->base; | |
| } | |
| void mgag200_crtc_atomic_destroy_state(struct drm_crtc *crtc, struct drm_crtc_state *crtc_state) | |
| { | |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); | |
| __drm_atomic_helper_crtc_destroy_state(&mgag200_crtc_state->base); | |
| kfree(mgag200_crtc_state); | |
| } | |
| /* | |
| * Mode config | |
| */ | |
| static void mgag200_mode_config_helper_atomic_commit_tail(struct drm_atomic_commit *state) | |
| { | |
| struct mga_device *mdev = to_mga_device(state->dev); | |
| /* | |
| * Concurrent operations could possibly trigger a call to | |
| * drm_connector_helper_funcs.get_modes by trying to read the | |
| * display modes. Protect access to I/O registers by acquiring | |
| * the I/O-register lock. | |
| */ | |
| mutex_lock(&mdev->rmmio_lock); | |
| drm_atomic_helper_commit_tail(state); | |
| mutex_unlock(&mdev->rmmio_lock); | |
| } | |
| static const struct drm_mode_config_helper_funcs mgag200_mode_config_helper_funcs = { | |
| .atomic_commit_tail = mgag200_mode_config_helper_atomic_commit_tail, | |
| }; | |
| /* Calculates a mode's required memory bandwidth (in KiB/sec). */ | |
| static uint32_t mgag200_calculate_mode_bandwidth(const struct drm_display_mode *mode, | |
| unsigned int bits_per_pixel) | |
| { | |
| uint32_t total_area, divisor; | |
| uint64_t active_area, pixels_per_second, bandwidth; | |
| uint64_t bytes_per_pixel = (bits_per_pixel + 7) / 8; | |
| divisor = 1024; | |
| if (!mode->htotal || !mode->vtotal || !mode->clock) | |
| return 0; | |
| active_area = mode->hdisplay * mode->vdisplay; | |
| total_area = mode->htotal * mode->vtotal; | |
| pixels_per_second = active_area * mode->clock * 1000; | |
| do_div(pixels_per_second, total_area); | |
| bandwidth = pixels_per_second * bytes_per_pixel * 100; | |
| do_div(bandwidth, divisor); | |
| return (uint32_t)bandwidth; | |
| } | |
| static enum drm_mode_status mgag200_mode_config_mode_valid(struct drm_device *dev, | |
| const struct drm_display_mode *mode) | |
| { | |
| static const unsigned int max_bpp = 4; // DRM_FORMAT_XRGB8888 | |
| struct mga_device *mdev = to_mga_device(dev); | |
| unsigned long fbsize, fbpages, max_fbpages; | |
| const struct mgag200_device_info *info = mdev->info; | |
| max_fbpages = mdev->vram_available >> PAGE_SHIFT; | |
| fbsize = mode->hdisplay * mode->vdisplay * max_bpp; | |
| fbpages = DIV_ROUND_UP(fbsize, PAGE_SIZE); | |
| if (fbpages > max_fbpages) | |
| return MODE_MEM; | |
| /* | |
| * Test the mode's required memory bandwidth if the device | |
| * specifies a maximum. Not all devices do though. | |
| */ | |
| if (info->max_mem_bandwidth) { | |
| uint32_t mode_bandwidth = mgag200_calculate_mode_bandwidth(mode, max_bpp * 8); | |
| if (mode_bandwidth > (info->max_mem_bandwidth * 1024)) | |
| return MODE_BAD; | |
| } | |
| return MODE_OK; | |
| } | |
| static const struct drm_mode_config_funcs mgag200_mode_config_funcs = { | |
| .fb_create = drm_gem_fb_create_with_dirty, | |
| .mode_valid = mgag200_mode_config_mode_valid, | |
| .atomic_check = drm_atomic_helper_check, | |
| .atomic_commit = drm_atomic_helper_commit, | |
| }; | |
| int mgag200_mode_config_init(struct mga_device *mdev, resource_size_t vram_available) | |
| { | |
| struct drm_device *dev = &mdev->base; | |
| int ret; | |
| mdev->vram_available = vram_available; | |
| ret = drmm_mode_config_init(dev); | |
| if (ret) { | |
| drm_err(dev, "drmm_mode_config_init() failed: %d\n", ret); | |
| return ret; | |
| } | |
| dev->mode_config.max_width = MGAG200_MAX_FB_WIDTH; | |
| dev->mode_config.max_height = MGAG200_MAX_FB_HEIGHT; | |
| dev->mode_config.preferred_depth = 24; | |
| dev->mode_config.funcs = &mgag200_mode_config_funcs; | |
| dev->mode_config.helper_private = &mgag200_mode_config_helper_funcs; | |
| return 0; | |
| } |