| // SPDX-License-Identifier: GPL-2.0 OR MIT | |
| /* Copyright 2017-2019 Qiang Yu <yuq825@gmail.com> */ | |
| #include <linux/iopoll.h> | |
| #include <linux/device.h> | |
| #include "lima_device.h" | |
| #include "lima_pmu.h" | |
| #include "lima_regs.h" | |
| #define pmu_write(reg, data) writel(data, ip->iomem + reg) | |
| #define pmu_read(reg) readl(ip->iomem + reg) | |
| static int lima_pmu_wait_cmd(struct lima_ip *ip) | |
| { | |
| struct lima_device *dev = ip->dev; | |
| int err; | |
| u32 v; | |
| err = readl_poll_timeout(ip->iomem + LIMA_PMU_INT_RAWSTAT, | |
| v, v & LIMA_PMU_INT_CMD_MASK, | |
| 100, 100000); | |
| if (err) { | |
| dev_err(dev->dev, "%s timeout wait pmu cmd\n", | |
| lima_ip_name(ip)); | |
| return err; | |
| } | |
| pmu_write(LIMA_PMU_INT_CLEAR, LIMA_PMU_INT_CMD_MASK); | |
| return 0; | |
| } | |
| static u32 lima_pmu_get_ip_mask(struct lima_ip *ip) | |
| { | |
| struct lima_device *dev = ip->dev; | |
| u32 ret = 0; | |
| int i; | |
| ret |= LIMA_PMU_POWER_GP0_MASK; | |
| if (dev->id == lima_gpu_mali400) { | |
| ret |= LIMA_PMU_POWER_L2_MASK; | |
| for (i = 0; i < 4; i++) { | |
| if (dev->ip[lima_ip_pp0 + i].present) | |
| ret |= LIMA_PMU_POWER_PP_MASK(i); | |
| } | |
| } else { | |
| if (dev->ip[lima_ip_pp0].present) | |
| ret |= LIMA450_PMU_POWER_PP0_MASK; | |
| for (i = lima_ip_pp1; i <= lima_ip_pp3; i++) { | |
| if (dev->ip[i].present) { | |
| ret |= LIMA450_PMU_POWER_PP13_MASK; | |
| break; | |
| } | |
| } | |
| for (i = lima_ip_pp4; i <= lima_ip_pp7; i++) { | |
| if (dev->ip[i].present) { | |
| ret |= LIMA450_PMU_POWER_PP47_MASK; | |
| break; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| static int lima_pmu_hw_init(struct lima_ip *ip) | |
| { | |
| int err; | |
| u32 stat; | |
| pmu_write(LIMA_PMU_INT_MASK, 0); | |
| /* If this value is too low, when in high GPU clk freq, | |
| * GPU will be in unstable state. | |
| */ | |
| pmu_write(LIMA_PMU_SW_DELAY, 0xffff); | |
| /* status reg 1=off 0=on */ | |
| stat = pmu_read(LIMA_PMU_STATUS); | |
| /* power up all ip */ | |
| if (stat) { | |
| pmu_write(LIMA_PMU_POWER_UP, stat); | |
| err = lima_pmu_wait_cmd(ip); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void lima_pmu_hw_fini(struct lima_ip *ip) | |
| { | |
| u32 stat; | |
| if (!ip->data.mask) | |
| ip->data.mask = lima_pmu_get_ip_mask(ip); | |
| stat = ~pmu_read(LIMA_PMU_STATUS) & ip->data.mask; | |
| if (stat) { | |
| pmu_write(LIMA_PMU_POWER_DOWN, stat); | |
| /* Don't wait for interrupt on Mali400 if all domains are | |
| * powered off because the HW won't generate an interrupt | |
| * in this case. | |
| */ | |
| if (ip->dev->id == lima_gpu_mali400) | |
| pmu_write(LIMA_PMU_INT_CLEAR, LIMA_PMU_INT_CMD_MASK); | |
| else | |
| lima_pmu_wait_cmd(ip); | |
| } | |
| } | |
| int lima_pmu_resume(struct lima_ip *ip) | |
| { | |
| return lima_pmu_hw_init(ip); | |
| } | |
| void lima_pmu_suspend(struct lima_ip *ip) | |
| { | |
| lima_pmu_hw_fini(ip); | |
| } | |
| int lima_pmu_init(struct lima_ip *ip) | |
| { | |
| return lima_pmu_hw_init(ip); | |
| } | |
| void lima_pmu_fini(struct lima_ip *ip) | |
| { | |
| lima_pmu_hw_fini(ip); | |
| } |