| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * DesignWare High-Definition Multimedia Interface (HDMI) driver | |
| * | |
| * Copyright (C) 2013-2015 Mentor Graphics Inc. | |
| * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. | |
| * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
| */ | |
| #include <linux/cleanup.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/hdmi.h> | |
| #include <linux/i2c.h> | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/of.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/regmap.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/spinlock.h> | |
| #include <media/cec-notifier.h> | |
| #include <linux/media-bus-format.h> | |
| #include <linux/videodev2.h> | |
| #include <drm/bridge/dw_hdmi.h> | |
| #include <drm/display/drm_hdmi_helper.h> | |
| #include <drm/display/drm_scdc_helper.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_bridge.h> | |
| #include <drm/drm_edid.h> | |
| #include <drm/drm_of.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "dw-hdmi-audio.h" | |
| #include "dw-hdmi-cec.h" | |
| #include "dw-hdmi.h" | |
| #define DDC_CI_ADDR 0x37 | |
| #define DDC_SEGMENT_ADDR 0x30 | |
| #define HDMI_EDID_LEN 512 | |
| /* DW-HDMI Controller >= 0x200a are at least compliant with SCDC version 1 */ | |
| #define SCDC_MIN_SOURCE_VERSION 0x1 | |
| static const u16 csc_coeff_default[3][4] = { | |
| { 0x2000, 0x0000, 0x0000, 0x0000 }, | |
| { 0x0000, 0x2000, 0x0000, 0x0000 }, | |
| { 0x0000, 0x0000, 0x2000, 0x0000 } | |
| }; | |
| static const u16 csc_coeff_rgb_out_eitu601[3][4] = { | |
| { 0x2000, 0x6926, 0x74fd, 0x010e }, | |
| { 0x2000, 0x2cdd, 0x0000, 0x7e9a }, | |
| { 0x2000, 0x0000, 0x38b4, 0x7e3b } | |
| }; | |
| static const u16 csc_coeff_rgb_out_eitu709[3][4] = { | |
| { 0x2000, 0x7106, 0x7a02, 0x00a7 }, | |
| { 0x2000, 0x3264, 0x0000, 0x7e6d }, | |
| { 0x2000, 0x0000, 0x3b61, 0x7e25 } | |
| }; | |
| static const u16 csc_coeff_rgb_in_eitu601[3][4] = { | |
| { 0x2591, 0x1322, 0x074b, 0x0000 }, | |
| { 0x6535, 0x2000, 0x7acc, 0x0200 }, | |
| { 0x6acd, 0x7534, 0x2000, 0x0200 } | |
| }; | |
| static const u16 csc_coeff_rgb_in_eitu709[3][4] = { | |
| { 0x2dc5, 0x0d9b, 0x049e, 0x0000 }, | |
| { 0x62f0, 0x2000, 0x7d11, 0x0200 }, | |
| { 0x6756, 0x78ab, 0x2000, 0x0200 } | |
| }; | |
| static const u16 csc_coeff_rgb_full_to_rgb_limited[3][4] = { | |
| { 0x1b7c, 0x0000, 0x0000, 0x0020 }, | |
| { 0x0000, 0x1b7c, 0x0000, 0x0020 }, | |
| { 0x0000, 0x0000, 0x1b7c, 0x0020 } | |
| }; | |
| struct hdmi_vmode { | |
| bool mdataenablepolarity; | |
| unsigned int mpixelclock; | |
| unsigned int mpixelrepetitioninput; | |
| unsigned int mpixelrepetitionoutput; | |
| unsigned int mtmdsclock; | |
| }; | |
| struct hdmi_data_info { | |
| unsigned int enc_in_bus_format; | |
| unsigned int enc_out_bus_format; | |
| unsigned int enc_in_encoding; | |
| unsigned int enc_out_encoding; | |
| unsigned int pix_repet_factor; | |
| unsigned int hdcp_enable; | |
| struct hdmi_vmode video_mode; | |
| bool rgb_limited_range; | |
| }; | |
| struct dw_hdmi_i2c { | |
| struct i2c_adapter adap; | |
| struct mutex lock; /* used to serialize data transfers */ | |
| struct completion cmp; | |
| u8 stat; | |
| u8 slave_reg; | |
| bool is_regaddr; | |
| bool is_segment; | |
| }; | |
| struct dw_hdmi_phy_data { | |
| enum dw_hdmi_phy_type type; | |
| const char *name; | |
| unsigned int gen; | |
| bool has_svsret; | |
| int (*configure)(struct dw_hdmi *hdmi, | |
| const struct dw_hdmi_plat_data *pdata, | |
| unsigned long mpixelclock); | |
| }; | |
| struct dw_hdmi { | |
| struct drm_connector connector; | |
| struct drm_bridge bridge; | |
| unsigned int version; | |
| struct platform_device *audio; | |
| struct platform_device *cec; | |
| struct device *dev; | |
| struct dw_hdmi_i2c *i2c; | |
| struct hdmi_data_info hdmi_data; | |
| const struct dw_hdmi_plat_data *plat_data; | |
| int vic; | |
| u8 edid[HDMI_EDID_LEN]; | |
| struct { | |
| const struct dw_hdmi_phy_ops *ops; | |
| const char *name; | |
| void *data; | |
| bool enabled; | |
| } phy; | |
| struct drm_display_mode previous_mode; | |
| struct i2c_adapter *ddc; | |
| void __iomem *regs; | |
| bool sink_is_hdmi; | |
| bool sink_has_audio; | |
| struct pinctrl *pinctrl; | |
| struct pinctrl_state *default_state; | |
| struct pinctrl_state *unwedge_state; | |
| struct mutex mutex; /* for state below and previous_mode */ | |
| enum drm_connector_force force; /* mutex-protected force state */ | |
| struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */ | |
| bool disabled; /* DRM has disabled our bridge */ | |
| bool bridge_is_on; /* indicates the bridge is on */ | |
| bool rxsense; /* rxsense state */ | |
| u8 phy_mask; /* desired phy int mask settings */ | |
| u8 mc_clkdis; /* clock disable register */ | |
| spinlock_t audio_lock; | |
| struct mutex audio_mutex; | |
| unsigned int sample_iec958; | |
| unsigned int sample_non_pcm; | |
| unsigned int sample_width; | |
| unsigned int sample_rate; | |
| unsigned int channels; | |
| unsigned int audio_cts; | |
| unsigned int audio_n; | |
| bool audio_enable; | |
| unsigned int reg_shift; | |
| struct regmap *regm; | |
| void (*enable_audio)(struct dw_hdmi *hdmi); | |
| void (*disable_audio)(struct dw_hdmi *hdmi); | |
| struct mutex cec_notifier_mutex; | |
| struct cec_notifier *cec_notifier; | |
| hdmi_codec_plugged_cb plugged_cb; | |
| struct device *codec_dev; | |
| enum drm_connector_status last_connector_result; | |
| }; | |
| const struct dw_hdmi_plat_data *dw_hdmi_to_plat_data(struct dw_hdmi *hdmi) | |
| { | |
| return hdmi->plat_data; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_to_plat_data); | |
| #define HDMI_IH_PHY_STAT0_RX_SENSE \ | |
| (HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \ | |
| HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3) | |
| #define HDMI_PHY_RX_SENSE \ | |
| (HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \ | |
| HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3) | |
| static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset) | |
| { | |
| regmap_write(hdmi->regm, offset << hdmi->reg_shift, val); | |
| } | |
| static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset) | |
| { | |
| unsigned int val = 0; | |
| regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val); | |
| return val; | |
| } | |
| static void handle_plugged_change(struct dw_hdmi *hdmi, bool plugged) | |
| { | |
| if (hdmi->plugged_cb && hdmi->codec_dev) | |
| hdmi->plugged_cb(hdmi->codec_dev, plugged); | |
| } | |
| int dw_hdmi_set_plugged_cb(struct dw_hdmi *hdmi, hdmi_codec_plugged_cb fn, | |
| struct device *codec_dev) | |
| { | |
| bool plugged; | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->plugged_cb = fn; | |
| hdmi->codec_dev = codec_dev; | |
| plugged = hdmi->last_connector_result == connector_status_connected; | |
| handle_plugged_change(hdmi, plugged); | |
| mutex_unlock(&hdmi->mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_plugged_cb); | |
| static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg) | |
| { | |
| regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data); | |
| } | |
| static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg, | |
| u8 shift, u8 mask) | |
| { | |
| hdmi_modb(hdmi, data << shift, mask, reg); | |
| } | |
| static void dw_hdmi_i2c_init(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL, | |
| HDMI_PHY_I2CM_INT_ADDR); | |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL | | |
| HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL, | |
| HDMI_PHY_I2CM_CTLINT_ADDR); | |
| /* Software reset */ | |
| hdmi_writeb(hdmi, 0x00, HDMI_I2CM_SOFTRSTZ); | |
| /* Set Standard Mode speed (determined to be 100KHz on iMX6) */ | |
| hdmi_writeb(hdmi, 0x00, HDMI_I2CM_DIV); | |
| /* Set done, not acknowledged and arbitration interrupt polarities */ | |
| hdmi_writeb(hdmi, HDMI_I2CM_INT_DONE_POL, HDMI_I2CM_INT); | |
| hdmi_writeb(hdmi, HDMI_I2CM_CTLINT_NAC_POL | HDMI_I2CM_CTLINT_ARB_POL, | |
| HDMI_I2CM_CTLINT); | |
| /* Clear DONE and ERROR interrupts */ | |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, | |
| HDMI_IH_I2CM_STAT0); | |
| /* Mute DONE and ERROR interrupts */ | |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, | |
| HDMI_IH_MUTE_I2CM_STAT0); | |
| } | |
| static bool dw_hdmi_i2c_unwedge(struct dw_hdmi *hdmi) | |
| { | |
| /* If no unwedge state then give up */ | |
| if (!hdmi->unwedge_state) | |
| return false; | |
| dev_info(hdmi->dev, "Attempting to unwedge stuck i2c bus\n"); | |
| /* | |
| * This is a huge hack to workaround a problem where the dw_hdmi i2c | |
| * bus could sometimes get wedged. Once wedged there doesn't appear | |
| * to be any way to unwedge it (including the HDMI_I2CM_SOFTRSTZ) | |
| * other than pulsing the SDA line. | |
| * | |
| * We appear to be able to pulse the SDA line (in the eyes of dw_hdmi) | |
| * by: | |
| * 1. Remux the pin as a GPIO output, driven low. | |
| * 2. Wait a little while. 1 ms seems to work, but we'll do 10. | |
| * 3. Immediately jump to remux the pin as dw_hdmi i2c again. | |
| * | |
| * At the moment of remuxing, the line will still be low due to its | |
| * recent stint as an output, but then it will be pulled high by the | |
| * (presumed) external pullup. dw_hdmi seems to see this as a rising | |
| * edge and that seems to get it out of its jam. | |
| * | |
| * This wedging was only ever seen on one TV, and only on one of | |
| * its HDMI ports. It happened when the TV was powered on while the | |
| * device was plugged in. A scope trace shows the TV bringing both SDA | |
| * and SCL low, then bringing them both back up at roughly the same | |
| * time. Presumably this confuses dw_hdmi because it saw activity but | |
| * no real STOP (maybe it thinks there's another master on the bus?). | |
| * Giving it a clean rising edge of SDA while SCL is already high | |
| * presumably makes dw_hdmi see a STOP which seems to bring dw_hdmi out | |
| * of its stupor. | |
| * | |
| * Note that after coming back alive, transfers seem to immediately | |
| * resume, so if we unwedge due to a timeout we should wait a little | |
| * longer for our transfer to finish, since it might have just started | |
| * now. | |
| */ | |
| pinctrl_select_state(hdmi->pinctrl, hdmi->unwedge_state); | |
| msleep(10); | |
| pinctrl_select_state(hdmi->pinctrl, hdmi->default_state); | |
| return true; | |
| } | |
| static int dw_hdmi_i2c_wait(struct dw_hdmi *hdmi) | |
| { | |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; | |
| int stat; | |
| stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10); | |
| if (!stat) { | |
| /* If we can't unwedge, return timeout */ | |
| if (!dw_hdmi_i2c_unwedge(hdmi)) | |
| return -EAGAIN; | |
| /* We tried to unwedge; give it another chance */ | |
| stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10); | |
| if (!stat) | |
| return -EAGAIN; | |
| } | |
| /* Check for error condition on the bus */ | |
| if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR) | |
| return -EIO; | |
| return 0; | |
| } | |
| static int dw_hdmi_i2c_read(struct dw_hdmi *hdmi, | |
| unsigned char *buf, unsigned int length) | |
| { | |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; | |
| int ret; | |
| if (!i2c->is_regaddr) { | |
| dev_dbg(hdmi->dev, "set read register address to 0\n"); | |
| i2c->slave_reg = 0x00; | |
| i2c->is_regaddr = true; | |
| } | |
| while (length--) { | |
| reinit_completion(&i2c->cmp); | |
| hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS); | |
| if (i2c->is_segment) | |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ_EXT, | |
| HDMI_I2CM_OPERATION); | |
| else | |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ, | |
| HDMI_I2CM_OPERATION); | |
| ret = dw_hdmi_i2c_wait(hdmi); | |
| if (ret) | |
| return ret; | |
| *buf++ = hdmi_readb(hdmi, HDMI_I2CM_DATAI); | |
| } | |
| i2c->is_segment = false; | |
| return 0; | |
| } | |
| static int dw_hdmi_i2c_write(struct dw_hdmi *hdmi, | |
| unsigned char *buf, unsigned int length) | |
| { | |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; | |
| int ret; | |
| if (!i2c->is_regaddr) { | |
| /* Use the first write byte as register address */ | |
| i2c->slave_reg = buf[0]; | |
| length--; | |
| buf++; | |
| i2c->is_regaddr = true; | |
| } | |
| while (length--) { | |
| reinit_completion(&i2c->cmp); | |
| hdmi_writeb(hdmi, *buf++, HDMI_I2CM_DATAO); | |
| hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS); | |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_WRITE, | |
| HDMI_I2CM_OPERATION); | |
| ret = dw_hdmi_i2c_wait(hdmi); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap, | |
| struct i2c_msg *msgs, int num) | |
| { | |
| struct dw_hdmi *hdmi = i2c_get_adapdata(adap); | |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; | |
| u8 addr = msgs[0].addr; | |
| int i, ret = 0; | |
| if (addr == DDC_CI_ADDR) | |
| /* | |
| * The internal I2C controller does not support the multi-byte | |
| * read and write operations needed for DDC/CI. | |
| * TOFIX: Blacklist the DDC/CI address until we filter out | |
| * unsupported I2C operations. | |
| */ | |
| return -EOPNOTSUPP; | |
| dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr); | |
| for (i = 0; i < num; i++) { | |
| if (msgs[i].len == 0) { | |
| dev_dbg(hdmi->dev, | |
| "unsupported transfer %d/%d, no data\n", | |
| i + 1, num); | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| mutex_lock(&i2c->lock); | |
| /* Unmute DONE and ERROR interrupts */ | |
| hdmi_writeb(hdmi, 0x00, HDMI_IH_MUTE_I2CM_STAT0); | |
| /* Set slave device address taken from the first I2C message */ | |
| hdmi_writeb(hdmi, addr, HDMI_I2CM_SLAVE); | |
| /* Set slave device register address on transfer */ | |
| i2c->is_regaddr = false; | |
| /* Set segment pointer for I2C extended read mode operation */ | |
| i2c->is_segment = false; | |
| for (i = 0; i < num; i++) { | |
| dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n", | |
| i + 1, num, msgs[i].len, msgs[i].flags); | |
| if (msgs[i].addr == DDC_SEGMENT_ADDR && msgs[i].len == 1) { | |
| i2c->is_segment = true; | |
| hdmi_writeb(hdmi, DDC_SEGMENT_ADDR, HDMI_I2CM_SEGADDR); | |
| hdmi_writeb(hdmi, *msgs[i].buf, HDMI_I2CM_SEGPTR); | |
| } else { | |
| if (msgs[i].flags & I2C_M_RD) | |
| ret = dw_hdmi_i2c_read(hdmi, msgs[i].buf, | |
| msgs[i].len); | |
| else | |
| ret = dw_hdmi_i2c_write(hdmi, msgs[i].buf, | |
| msgs[i].len); | |
| } | |
| if (ret < 0) | |
| break; | |
| } | |
| if (!ret) | |
| ret = num; | |
| /* Mute DONE and ERROR interrupts */ | |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, | |
| HDMI_IH_MUTE_I2CM_STAT0); | |
| mutex_unlock(&i2c->lock); | |
| return ret; | |
| } | |
| static u32 dw_hdmi_i2c_func(struct i2c_adapter *adapter) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
| } | |
| static const struct i2c_algorithm dw_hdmi_algorithm = { | |
| .master_xfer = dw_hdmi_i2c_xfer, | |
| .functionality = dw_hdmi_i2c_func, | |
| }; | |
| static struct i2c_adapter *dw_hdmi_i2c_adapter(struct dw_hdmi *hdmi) | |
| { | |
| struct i2c_adapter *adap; | |
| struct dw_hdmi_i2c *i2c; | |
| int ret; | |
| i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL); | |
| if (!i2c) | |
| return ERR_PTR(-ENOMEM); | |
| mutex_init(&i2c->lock); | |
| init_completion(&i2c->cmp); | |
| adap = &i2c->adap; | |
| adap->owner = THIS_MODULE; | |
| adap->dev.parent = hdmi->dev; | |
| adap->algo = &dw_hdmi_algorithm; | |
| strscpy(adap->name, "DesignWare HDMI", sizeof(adap->name)); | |
| i2c_set_adapdata(adap, hdmi); | |
| ret = i2c_add_adapter(adap); | |
| if (ret) { | |
| dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name); | |
| devm_kfree(hdmi->dev, i2c); | |
| return ERR_PTR(ret); | |
| } | |
| hdmi->i2c = i2c; | |
| dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name); | |
| return adap; | |
| } | |
| static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts, | |
| unsigned int n) | |
| { | |
| /* Must be set/cleared first */ | |
| hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3); | |
| /* nshift factor = 0 */ | |
| hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3); | |
| /* Use automatic CTS generation mode when CTS is not set */ | |
| if (cts) | |
| hdmi_writeb(hdmi, ((cts >> 16) & | |
| HDMI_AUD_CTS3_AUDCTS19_16_MASK) | | |
| HDMI_AUD_CTS3_CTS_MANUAL, | |
| HDMI_AUD_CTS3); | |
| else | |
| hdmi_writeb(hdmi, 0, HDMI_AUD_CTS3); | |
| hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2); | |
| hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1); | |
| hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3); | |
| hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2); | |
| hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1); | |
| } | |
| static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk) | |
| { | |
| unsigned int n = (128 * freq) / 1000; | |
| unsigned int mult = 1; | |
| while (freq > 48000) { | |
| mult *= 2; | |
| freq /= 2; | |
| } | |
| switch (freq) { | |
| case 32000: | |
| if (pixel_clk == 25175000) | |
| n = 4576; | |
| else if (pixel_clk == 27027000) | |
| n = 4096; | |
| else if (pixel_clk == 74176000 || pixel_clk == 148352000) | |
| n = 11648; | |
| else if (pixel_clk == 297000000) | |
| n = 3072; | |
| else | |
| n = 4096; | |
| n *= mult; | |
| break; | |
| case 44100: | |
| if (pixel_clk == 25175000) | |
| n = 7007; | |
| else if (pixel_clk == 74176000) | |
| n = 17836; | |
| else if (pixel_clk == 148352000) | |
| n = 8918; | |
| else if (pixel_clk == 297000000) | |
| n = 4704; | |
| else | |
| n = 6272; | |
| n *= mult; | |
| break; | |
| case 48000: | |
| if (pixel_clk == 25175000) | |
| n = 6864; | |
| else if (pixel_clk == 27027000) | |
| n = 6144; | |
| else if (pixel_clk == 74176000) | |
| n = 11648; | |
| else if (pixel_clk == 148352000) | |
| n = 5824; | |
| else if (pixel_clk == 297000000) | |
| n = 5120; | |
| else | |
| n = 6144; | |
| n *= mult; | |
| break; | |
| default: | |
| break; | |
| } | |
| return n; | |
| } | |
| /* | |
| * When transmitting IEC60958 linear PCM audio, these registers allow to | |
| * configure the channel status information of all the channel status | |
| * bits in the IEC60958 frame. For the moment this configuration is only | |
| * used when the I2S audio interface, General Purpose Audio (GPA), | |
| * or AHB audio DMA (AHBAUDDMA) interface is active | |
| * (for S/PDIF interface this information comes from the stream). | |
| */ | |
| void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, | |
| u8 *channel_status) | |
| { | |
| /* | |
| * Set channel status register for frequency and word length. | |
| * Use default values for other registers. | |
| */ | |
| hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7); | |
| hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status); | |
| static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi, | |
| unsigned long pixel_clk, unsigned int sample_rate) | |
| { | |
| unsigned long ftdms = pixel_clk; | |
| unsigned int n, cts; | |
| u8 config3; | |
| u64 tmp; | |
| n = hdmi_compute_n(sample_rate, pixel_clk); | |
| config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID); | |
| /* Compute CTS when using internal AHB audio or General Parallel audio*/ | |
| if ((config3 & HDMI_CONFIG3_AHBAUDDMA) || (config3 & HDMI_CONFIG3_GPAUD)) { | |
| /* | |
| * Compute the CTS value from the N value. Note that CTS and N | |
| * can be up to 20 bits in total, so we need 64-bit math. Also | |
| * note that our TDMS clock is not fully accurate; it is | |
| * accurate to kHz. This can introduce an unnecessary remainder | |
| * in the calculation below, so we don't try to warn about that. | |
| */ | |
| tmp = (u64)ftdms * n; | |
| do_div(tmp, 128 * sample_rate); | |
| cts = tmp; | |
| dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n", | |
| __func__, sample_rate, | |
| ftdms / 1000000, (ftdms / 1000) % 1000, | |
| n, cts); | |
| } else { | |
| cts = 0; | |
| } | |
| spin_lock_irq(&hdmi->audio_lock); | |
| hdmi->audio_n = n; | |
| hdmi->audio_cts = cts; | |
| hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0); | |
| spin_unlock_irq(&hdmi->audio_lock); | |
| } | |
| static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate); | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mtmdsclock, | |
| hdmi->sample_rate); | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| void dw_hdmi_set_sample_width(struct dw_hdmi *hdmi, unsigned int width) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi->sample_width = width; | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_width); | |
| void dw_hdmi_set_sample_non_pcm(struct dw_hdmi *hdmi, unsigned int non_pcm) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi->sample_non_pcm = non_pcm; | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_non_pcm); | |
| void dw_hdmi_set_sample_iec958(struct dw_hdmi *hdmi, unsigned int iec958) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi->sample_iec958 = iec958; | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_iec958); | |
| void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi->sample_rate = rate; | |
| hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mtmdsclock, | |
| hdmi->sample_rate); | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate); | |
| void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt) | |
| { | |
| u8 layout; | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi->channels = cnt; | |
| /* | |
| * For >2 channel PCM audio, we need to select layout 1 | |
| * and set an appropriate channel map. | |
| */ | |
| if (cnt > 2) | |
| layout = HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1; | |
| else | |
| layout = HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0; | |
| hdmi_modb(hdmi, layout, HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK, | |
| HDMI_FC_AUDSCONF); | |
| /* Set the audio infoframes channel count */ | |
| hdmi_modb(hdmi, (cnt - 1) << HDMI_FC_AUDICONF0_CC_OFFSET, | |
| HDMI_FC_AUDICONF0_CC_MASK, HDMI_FC_AUDICONF0); | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_count); | |
| void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int ca) | |
| { | |
| mutex_lock(&hdmi->audio_mutex); | |
| hdmi_writeb(hdmi, ca, HDMI_FC_AUDICONF2); | |
| mutex_unlock(&hdmi->audio_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_allocation); | |
| static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable) | |
| { | |
| if (enable) | |
| hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_AUDCLK_DISABLE; | |
| else | |
| hdmi->mc_clkdis |= HDMI_MC_CLKDIS_AUDCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| } | |
| static u8 *hdmi_audio_get_eld(struct dw_hdmi *hdmi) | |
| { | |
| if (!hdmi->curr_conn) | |
| return NULL; | |
| return hdmi->curr_conn->eld; | |
| } | |
| static void dw_hdmi_gp_audio_enable(struct dw_hdmi *hdmi) | |
| { | |
| const struct dw_hdmi_plat_data *pdata = hdmi->plat_data; | |
| int sample_freq = 0x2, org_sample_freq = 0xD; | |
| int ch_mask = BIT(hdmi->channels) - 1; | |
| switch (hdmi->sample_rate) { | |
| case 32000: | |
| sample_freq = 0x03; | |
| org_sample_freq = 0x0C; | |
| break; | |
| case 44100: | |
| sample_freq = 0x00; | |
| org_sample_freq = 0x0F; | |
| break; | |
| case 48000: | |
| sample_freq = 0x02; | |
| org_sample_freq = 0x0D; | |
| break; | |
| case 88200: | |
| sample_freq = 0x08; | |
| org_sample_freq = 0x07; | |
| break; | |
| case 96000: | |
| sample_freq = 0x0A; | |
| org_sample_freq = 0x05; | |
| break; | |
| case 176400: | |
| sample_freq = 0x0C; | |
| org_sample_freq = 0x03; | |
| break; | |
| case 192000: | |
| sample_freq = 0x0E; | |
| org_sample_freq = 0x01; | |
| break; | |
| default: | |
| break; | |
| } | |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n); | |
| hdmi_enable_audio_clk(hdmi, true); | |
| hdmi_writeb(hdmi, 0x1, HDMI_FC_AUDSCHNLS0); | |
| hdmi_writeb(hdmi, hdmi->channels, HDMI_FC_AUDSCHNLS2); | |
| hdmi_writeb(hdmi, 0x22, HDMI_FC_AUDSCHNLS3); | |
| hdmi_writeb(hdmi, 0x22, HDMI_FC_AUDSCHNLS4); | |
| hdmi_writeb(hdmi, 0x11, HDMI_FC_AUDSCHNLS5); | |
| hdmi_writeb(hdmi, 0x11, HDMI_FC_AUDSCHNLS6); | |
| hdmi_writeb(hdmi, (0x3 << 4) | sample_freq, HDMI_FC_AUDSCHNLS7); | |
| hdmi_writeb(hdmi, (org_sample_freq << 4) | 0xb, HDMI_FC_AUDSCHNLS8); | |
| hdmi_writeb(hdmi, ch_mask, HDMI_GP_CONF1); | |
| hdmi_writeb(hdmi, 0x02, HDMI_GP_CONF2); | |
| hdmi_writeb(hdmi, 0x01, HDMI_GP_CONF0); | |
| hdmi_modb(hdmi, 0x3, 0x3, HDMI_FC_DATAUTO3); | |
| /* hbr */ | |
| if (hdmi->sample_rate == 192000 && hdmi->channels == 8 && | |
| hdmi->sample_width == 32 && hdmi->sample_non_pcm) | |
| hdmi_modb(hdmi, 0x01, 0x01, HDMI_GP_CONF2); | |
| if (pdata->enable_audio) | |
| pdata->enable_audio(hdmi, | |
| hdmi->channels, | |
| hdmi->sample_width, | |
| hdmi->sample_rate, | |
| hdmi->sample_non_pcm, | |
| hdmi->sample_iec958); | |
| } | |
| static void dw_hdmi_gp_audio_disable(struct dw_hdmi *hdmi) | |
| { | |
| const struct dw_hdmi_plat_data *pdata = hdmi->plat_data; | |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, 0); | |
| hdmi_modb(hdmi, 0, 0x3, HDMI_FC_DATAUTO3); | |
| if (pdata->disable_audio) | |
| pdata->disable_audio(hdmi); | |
| hdmi_enable_audio_clk(hdmi, false); | |
| } | |
| static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n); | |
| } | |
| static void dw_hdmi_ahb_audio_disable(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, 0); | |
| } | |
| static void dw_hdmi_i2s_audio_enable(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n); | |
| hdmi_enable_audio_clk(hdmi, true); | |
| } | |
| static void dw_hdmi_i2s_audio_disable(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_enable_audio_clk(hdmi, false); | |
| } | |
| void dw_hdmi_audio_enable(struct dw_hdmi *hdmi) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&hdmi->audio_lock, flags); | |
| hdmi->audio_enable = true; | |
| if (hdmi->enable_audio) | |
| hdmi->enable_audio(hdmi); | |
| spin_unlock_irqrestore(&hdmi->audio_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_audio_enable); | |
| void dw_hdmi_audio_disable(struct dw_hdmi *hdmi) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&hdmi->audio_lock, flags); | |
| hdmi->audio_enable = false; | |
| if (hdmi->disable_audio) | |
| hdmi->disable_audio(hdmi); | |
| spin_unlock_irqrestore(&hdmi->audio_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_audio_disable); | |
| static bool hdmi_bus_fmt_is_rgb(unsigned int bus_format) | |
| { | |
| switch (bus_format) { | |
| case MEDIA_BUS_FMT_RGB888_1X24: | |
| case MEDIA_BUS_FMT_RGB101010_1X30: | |
| case MEDIA_BUS_FMT_RGB121212_1X36: | |
| case MEDIA_BUS_FMT_RGB161616_1X48: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool hdmi_bus_fmt_is_yuv444(unsigned int bus_format) | |
| { | |
| switch (bus_format) { | |
| case MEDIA_BUS_FMT_YUV8_1X24: | |
| case MEDIA_BUS_FMT_YUV10_1X30: | |
| case MEDIA_BUS_FMT_YUV12_1X36: | |
| case MEDIA_BUS_FMT_YUV16_1X48: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool hdmi_bus_fmt_is_yuv422(unsigned int bus_format) | |
| { | |
| switch (bus_format) { | |
| case MEDIA_BUS_FMT_UYVY8_1X16: | |
| case MEDIA_BUS_FMT_UYVY10_1X20: | |
| case MEDIA_BUS_FMT_UYVY12_1X24: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool hdmi_bus_fmt_is_yuv420(unsigned int bus_format) | |
| { | |
| switch (bus_format) { | |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: | |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: | |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: | |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static int hdmi_bus_fmt_color_depth(unsigned int bus_format) | |
| { | |
| switch (bus_format) { | |
| case MEDIA_BUS_FMT_RGB888_1X24: | |
| case MEDIA_BUS_FMT_YUV8_1X24: | |
| case MEDIA_BUS_FMT_UYVY8_1X16: | |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: | |
| return 8; | |
| case MEDIA_BUS_FMT_RGB101010_1X30: | |
| case MEDIA_BUS_FMT_YUV10_1X30: | |
| case MEDIA_BUS_FMT_UYVY10_1X20: | |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: | |
| return 10; | |
| case MEDIA_BUS_FMT_RGB121212_1X36: | |
| case MEDIA_BUS_FMT_YUV12_1X36: | |
| case MEDIA_BUS_FMT_UYVY12_1X24: | |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: | |
| return 12; | |
| case MEDIA_BUS_FMT_RGB161616_1X48: | |
| case MEDIA_BUS_FMT_YUV16_1X48: | |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: | |
| return 16; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* | |
| * this submodule is responsible for the video data synchronization. | |
| * for example, for RGB 4:4:4 input, the data map is defined as | |
| * pin{47~40} <==> R[7:0] | |
| * pin{31~24} <==> G[7:0] | |
| * pin{15~8} <==> B[7:0] | |
| */ | |
| static void hdmi_video_sample(struct dw_hdmi *hdmi) | |
| { | |
| int color_format = 0; | |
| u8 val; | |
| switch (hdmi->hdmi_data.enc_in_bus_format) { | |
| case MEDIA_BUS_FMT_RGB888_1X24: | |
| color_format = 0x01; | |
| break; | |
| case MEDIA_BUS_FMT_RGB101010_1X30: | |
| color_format = 0x03; | |
| break; | |
| case MEDIA_BUS_FMT_RGB121212_1X36: | |
| color_format = 0x05; | |
| break; | |
| case MEDIA_BUS_FMT_RGB161616_1X48: | |
| color_format = 0x07; | |
| break; | |
| case MEDIA_BUS_FMT_YUV8_1X24: | |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: | |
| color_format = 0x09; | |
| break; | |
| case MEDIA_BUS_FMT_YUV10_1X30: | |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: | |
| color_format = 0x0B; | |
| break; | |
| case MEDIA_BUS_FMT_YUV12_1X36: | |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: | |
| color_format = 0x0D; | |
| break; | |
| case MEDIA_BUS_FMT_YUV16_1X48: | |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: | |
| color_format = 0x0F; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY8_1X16: | |
| color_format = 0x16; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY10_1X20: | |
| color_format = 0x14; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY12_1X24: | |
| color_format = 0x12; | |
| break; | |
| default: | |
| return; | |
| } | |
| val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE | | |
| ((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) & | |
| HDMI_TX_INVID0_VIDEO_MAPPING_MASK); | |
| hdmi_writeb(hdmi, val, HDMI_TX_INVID0); | |
| /* Enable TX stuffing: When DE is inactive, fix the output data to 0 */ | |
| val = HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE | | |
| HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE | | |
| HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE; | |
| hdmi_writeb(hdmi, val, HDMI_TX_INSTUFFING); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA0); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA1); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA0); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA1); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA0); | |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA1); | |
| } | |
| static int is_color_space_conversion(struct dw_hdmi *hdmi) | |
| { | |
| struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data; | |
| bool is_input_rgb, is_output_rgb; | |
| is_input_rgb = hdmi_bus_fmt_is_rgb(hdmi_data->enc_in_bus_format); | |
| is_output_rgb = hdmi_bus_fmt_is_rgb(hdmi_data->enc_out_bus_format); | |
| return (is_input_rgb != is_output_rgb) || | |
| (is_input_rgb && is_output_rgb && hdmi_data->rgb_limited_range); | |
| } | |
| static int is_color_space_decimation(struct dw_hdmi *hdmi) | |
| { | |
| if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) | |
| return 0; | |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format) || | |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_in_bus_format)) | |
| return 1; | |
| return 0; | |
| } | |
| static int is_color_space_interpolation(struct dw_hdmi *hdmi) | |
| { | |
| if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_in_bus_format)) | |
| return 0; | |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) || | |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) | |
| return 1; | |
| return 0; | |
| } | |
| static bool is_csc_needed(struct dw_hdmi *hdmi) | |
| { | |
| return is_color_space_conversion(hdmi) || | |
| is_color_space_decimation(hdmi) || | |
| is_color_space_interpolation(hdmi); | |
| } | |
| static void dw_hdmi_update_csc_coeffs(struct dw_hdmi *hdmi) | |
| { | |
| const u16 (*csc_coeff)[3][4] = &csc_coeff_default; | |
| bool is_input_rgb, is_output_rgb; | |
| unsigned i; | |
| u32 csc_scale = 1; | |
| is_input_rgb = hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format); | |
| is_output_rgb = hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format); | |
| if (!is_input_rgb && is_output_rgb) { | |
| if (hdmi->hdmi_data.enc_out_encoding == V4L2_YCBCR_ENC_601) | |
| csc_coeff = &csc_coeff_rgb_out_eitu601; | |
| else | |
| csc_coeff = &csc_coeff_rgb_out_eitu709; | |
| } else if (is_input_rgb && !is_output_rgb) { | |
| if (hdmi->hdmi_data.enc_out_encoding == V4L2_YCBCR_ENC_601) | |
| csc_coeff = &csc_coeff_rgb_in_eitu601; | |
| else | |
| csc_coeff = &csc_coeff_rgb_in_eitu709; | |
| csc_scale = 0; | |
| } else if (is_input_rgb && is_output_rgb && | |
| hdmi->hdmi_data.rgb_limited_range) { | |
| csc_coeff = &csc_coeff_rgb_full_to_rgb_limited; | |
| } | |
| /* The CSC registers are sequential, alternating MSB then LSB */ | |
| for (i = 0; i < ARRAY_SIZE(csc_coeff_default[0]); i++) { | |
| u16 coeff_a = (*csc_coeff)[0][i]; | |
| u16 coeff_b = (*csc_coeff)[1][i]; | |
| u16 coeff_c = (*csc_coeff)[2][i]; | |
| hdmi_writeb(hdmi, coeff_a & 0xff, HDMI_CSC_COEF_A1_LSB + i * 2); | |
| hdmi_writeb(hdmi, coeff_a >> 8, HDMI_CSC_COEF_A1_MSB + i * 2); | |
| hdmi_writeb(hdmi, coeff_b & 0xff, HDMI_CSC_COEF_B1_LSB + i * 2); | |
| hdmi_writeb(hdmi, coeff_b >> 8, HDMI_CSC_COEF_B1_MSB + i * 2); | |
| hdmi_writeb(hdmi, coeff_c & 0xff, HDMI_CSC_COEF_C1_LSB + i * 2); | |
| hdmi_writeb(hdmi, coeff_c >> 8, HDMI_CSC_COEF_C1_MSB + i * 2); | |
| } | |
| hdmi_modb(hdmi, csc_scale, HDMI_CSC_SCALE_CSCSCALE_MASK, | |
| HDMI_CSC_SCALE); | |
| } | |
| static void hdmi_video_csc(struct dw_hdmi *hdmi) | |
| { | |
| int color_depth = 0; | |
| int interpolation = HDMI_CSC_CFG_INTMODE_DISABLE; | |
| int decimation = 0; | |
| /* YCC422 interpolation to 444 mode */ | |
| if (is_color_space_interpolation(hdmi)) | |
| interpolation = HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1; | |
| else if (is_color_space_decimation(hdmi)) | |
| decimation = HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3; | |
| switch (hdmi_bus_fmt_color_depth(hdmi->hdmi_data.enc_out_bus_format)) { | |
| case 8: | |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP; | |
| break; | |
| case 10: | |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP; | |
| break; | |
| case 12: | |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP; | |
| break; | |
| case 16: | |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP; | |
| break; | |
| default: | |
| return; | |
| } | |
| /* Configure the CSC registers */ | |
| hdmi_writeb(hdmi, interpolation | decimation, HDMI_CSC_CFG); | |
| hdmi_modb(hdmi, color_depth, HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK, | |
| HDMI_CSC_SCALE); | |
| dw_hdmi_update_csc_coeffs(hdmi); | |
| } | |
| /* | |
| * HDMI video packetizer is used to packetize the data. | |
| * for example, if input is YCC422 mode or repeater is used, | |
| * data should be repacked this module can be bypassed. | |
| */ | |
| static void hdmi_video_packetize(struct dw_hdmi *hdmi) | |
| { | |
| unsigned int color_depth = 0; | |
| unsigned int remap_size = HDMI_VP_REMAP_YCC422_16bit; | |
| unsigned int output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_PP; | |
| struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data; | |
| u8 val, vp_conf; | |
| u8 clear_gcp_auto = 0; | |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) || | |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format) || | |
| hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format)) { | |
| switch (hdmi_bus_fmt_color_depth( | |
| hdmi->hdmi_data.enc_out_bus_format)) { | |
| case 8: | |
| color_depth = 4; | |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS; | |
| clear_gcp_auto = 1; | |
| break; | |
| case 10: | |
| color_depth = 5; | |
| break; | |
| case 12: | |
| color_depth = 6; | |
| break; | |
| case 16: | |
| color_depth = 7; | |
| break; | |
| default: | |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS; | |
| } | |
| } else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) { | |
| switch (hdmi_bus_fmt_color_depth( | |
| hdmi->hdmi_data.enc_out_bus_format)) { | |
| case 0: | |
| case 8: | |
| remap_size = HDMI_VP_REMAP_YCC422_16bit; | |
| clear_gcp_auto = 1; | |
| break; | |
| case 10: | |
| remap_size = HDMI_VP_REMAP_YCC422_20bit; | |
| break; | |
| case 12: | |
| remap_size = HDMI_VP_REMAP_YCC422_24bit; | |
| break; | |
| default: | |
| return; | |
| } | |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422; | |
| } else { | |
| return; | |
| } | |
| /* set the packetizer registers */ | |
| val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) & | |
| HDMI_VP_PR_CD_COLOR_DEPTH_MASK) | | |
| ((hdmi_data->pix_repet_factor << | |
| HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET) & | |
| HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK); | |
| hdmi_writeb(hdmi, val, HDMI_VP_PR_CD); | |
| /* HDMI1.4b specification section 6.5.3: | |
| * Source shall only send GCPs with non-zero CD to sinks | |
| * that indicate support for Deep Color. | |
| * GCP only transmit CD and do not handle AVMUTE, PP norDefault_Phase (yet). | |
| * Disable Auto GCP when 24-bit color for sinks that not support Deep Color. | |
| */ | |
| val = hdmi_readb(hdmi, HDMI_FC_DATAUTO3); | |
| if (clear_gcp_auto == 1) | |
| val &= ~HDMI_FC_DATAUTO3_GCP_AUTO; | |
| else | |
| val |= HDMI_FC_DATAUTO3_GCP_AUTO; | |
| hdmi_writeb(hdmi, val, HDMI_FC_DATAUTO3); | |
| hdmi_modb(hdmi, HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE, | |
| HDMI_VP_STUFF_PR_STUFFING_MASK, HDMI_VP_STUFF); | |
| /* Data from pixel repeater block */ | |
| if (hdmi_data->pix_repet_factor > 1) { | |
| vp_conf = HDMI_VP_CONF_PR_EN_ENABLE | | |
| HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER; | |
| } else { /* data from packetizer block */ | |
| vp_conf = HDMI_VP_CONF_PR_EN_DISABLE | | |
| HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER; | |
| } | |
| hdmi_modb(hdmi, vp_conf, | |
| HDMI_VP_CONF_PR_EN_MASK | | |
| HDMI_VP_CONF_BYPASS_SELECT_MASK, HDMI_VP_CONF); | |
| hdmi_modb(hdmi, 1 << HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET, | |
| HDMI_VP_STUFF_IDEFAULT_PHASE_MASK, HDMI_VP_STUFF); | |
| hdmi_writeb(hdmi, remap_size, HDMI_VP_REMAP); | |
| if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_PP) { | |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE | | |
| HDMI_VP_CONF_PP_EN_ENABLE | | |
| HDMI_VP_CONF_YCC422_EN_DISABLE; | |
| } else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422) { | |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE | | |
| HDMI_VP_CONF_PP_EN_DISABLE | | |
| HDMI_VP_CONF_YCC422_EN_ENABLE; | |
| } else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS) { | |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_ENABLE | | |
| HDMI_VP_CONF_PP_EN_DISABLE | | |
| HDMI_VP_CONF_YCC422_EN_DISABLE; | |
| } else { | |
| return; | |
| } | |
| hdmi_modb(hdmi, vp_conf, | |
| HDMI_VP_CONF_BYPASS_EN_MASK | HDMI_VP_CONF_PP_EN_ENMASK | | |
| HDMI_VP_CONF_YCC422_EN_MASK, HDMI_VP_CONF); | |
| hdmi_modb(hdmi, HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE | | |
| HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE, | |
| HDMI_VP_STUFF_PP_STUFFING_MASK | | |
| HDMI_VP_STUFF_YCC422_STUFFING_MASK, HDMI_VP_STUFF); | |
| hdmi_modb(hdmi, output_select, HDMI_VP_CONF_OUTPUT_SELECTOR_MASK, | |
| HDMI_VP_CONF); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * Synopsys PHY Handling | |
| */ | |
| static inline void hdmi_phy_test_clear(struct dw_hdmi *hdmi, | |
| unsigned char bit) | |
| { | |
| hdmi_modb(hdmi, bit << HDMI_PHY_TST0_TSTCLR_OFFSET, | |
| HDMI_PHY_TST0_TSTCLR_MASK, HDMI_PHY_TST0); | |
| } | |
| static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec) | |
| { | |
| u32 val; | |
| while ((val = hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) { | |
| if (msec-- == 0) | |
| return false; | |
| udelay(1000); | |
| } | |
| hdmi_writeb(hdmi, val, HDMI_IH_I2CMPHY_STAT0); | |
| return true; | |
| } | |
| void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data, | |
| unsigned char addr) | |
| { | |
| hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0); | |
| hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR); | |
| hdmi_writeb(hdmi, (unsigned char)(data >> 8), | |
| HDMI_PHY_I2CM_DATAO_1_ADDR); | |
| hdmi_writeb(hdmi, (unsigned char)(data >> 0), | |
| HDMI_PHY_I2CM_DATAO_0_ADDR); | |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_OPERATION_ADDR_WRITE, | |
| HDMI_PHY_I2CM_OPERATION_ADDR); | |
| hdmi_phy_wait_i2c_done(hdmi, 1000); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write); | |
| /* Filter out invalid setups to avoid configuring SCDC and scrambling */ | |
| static bool dw_hdmi_support_scdc(struct dw_hdmi *hdmi, | |
| const struct drm_display_info *display) | |
| { | |
| /* Completely disable SCDC support for older controllers */ | |
| if (hdmi->version < 0x200a) | |
| return false; | |
| /* Disable if no DDC bus */ | |
| if (!hdmi->ddc) | |
| return false; | |
| /* Disable if SCDC is not supported, or if an HF-VSDB block is absent */ | |
| if (!display->hdmi.scdc.supported || | |
| !display->hdmi.scdc.scrambling.supported) | |
| return false; | |
| /* | |
| * Disable if display only support low TMDS rates and scrambling | |
| * for low rates is not supported either | |
| */ | |
| if (!display->hdmi.scdc.scrambling.low_rates && | |
| display->max_tmds_clock <= 340000) | |
| return false; | |
| return true; | |
| } | |
| /* | |
| * HDMI2.0 Specifies the following procedure for High TMDS Bit Rates: | |
| * - The Source shall suspend transmission of the TMDS clock and data | |
| * - The Source shall write to the TMDS_Bit_Clock_Ratio bit to change it | |
| * from a 0 to a 1 or from a 1 to a 0 | |
| * - The Source shall allow a minimum of 1 ms and a maximum of 100 ms from | |
| * the time the TMDS_Bit_Clock_Ratio bit is written until resuming | |
| * transmission of TMDS clock and data | |
| * | |
| * To respect the 100ms maximum delay, the dw_hdmi_set_high_tmds_clock_ratio() | |
| * helper should called right before enabling the TMDS Clock and Data in | |
| * the PHY configuration callback. | |
| */ | |
| void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi, | |
| const struct drm_display_info *display) | |
| { | |
| unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mtmdsclock; | |
| /* Control for TMDS Bit Period/TMDS Clock-Period Ratio */ | |
| if (dw_hdmi_support_scdc(hdmi, display)) { | |
| if (mtmdsclock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ) | |
| drm_scdc_set_high_tmds_clock_ratio(hdmi->curr_conn, 1); | |
| else | |
| drm_scdc_set_high_tmds_clock_ratio(hdmi->curr_conn, 0); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_high_tmds_clock_ratio); | |
| static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable) | |
| { | |
| hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_PDZ_OFFSET, | |
| HDMI_PHY_CONF0_PDZ_MASK); | |
| } | |
| static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_ENTMDS_OFFSET, | |
| HDMI_PHY_CONF0_ENTMDS_MASK); | |
| } | |
| static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_SVSRET_OFFSET, | |
| HDMI_PHY_CONF0_SVSRET_MASK); | |
| } | |
| void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET, | |
| HDMI_PHY_CONF0_GEN2_PDDQ_MASK); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq); | |
| void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET, | |
| HDMI_PHY_CONF0_GEN2_TXPWRON_MASK); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron); | |
| static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_SELDATAENPOL_OFFSET, | |
| HDMI_PHY_CONF0_SELDATAENPOL_MASK); | |
| } | |
| static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable) | |
| { | |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, | |
| HDMI_PHY_CONF0_SELDIPIF_OFFSET, | |
| HDMI_PHY_CONF0_SELDIPIF_MASK); | |
| } | |
| void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi) | |
| { | |
| /* PHY reset. The reset signal is active low on Gen1 PHYs. */ | |
| hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); | |
| hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen1_reset); | |
| void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi) | |
| { | |
| /* PHY reset. The reset signal is active high on Gen2 PHYs. */ | |
| hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); | |
| hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset); | |
| void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address) | |
| { | |
| hdmi_phy_test_clear(hdmi, 1); | |
| hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR); | |
| hdmi_phy_test_clear(hdmi, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr); | |
| static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi) | |
| { | |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; | |
| unsigned int i; | |
| u16 val; | |
| if (phy->gen == 1) { | |
| dw_hdmi_phy_enable_tmds(hdmi, 0); | |
| dw_hdmi_phy_enable_powerdown(hdmi, true); | |
| return; | |
| } | |
| dw_hdmi_phy_gen2_txpwron(hdmi, 0); | |
| /* | |
| * Wait for TX_PHY_LOCK to be deasserted to indicate that the PHY went | |
| * to low power mode. | |
| */ | |
| for (i = 0; i < 5; ++i) { | |
| val = hdmi_readb(hdmi, HDMI_PHY_STAT0); | |
| if (!(val & HDMI_PHY_TX_PHY_LOCK)) | |
| break; | |
| usleep_range(1000, 2000); | |
| } | |
| if (val & HDMI_PHY_TX_PHY_LOCK) | |
| dev_warn(hdmi->dev, "PHY failed to power down\n"); | |
| else | |
| dev_dbg(hdmi->dev, "PHY powered down in %u iterations\n", i); | |
| dw_hdmi_phy_gen2_pddq(hdmi, 1); | |
| } | |
| static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi) | |
| { | |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; | |
| unsigned int i; | |
| u8 val; | |
| if (phy->gen == 1) { | |
| dw_hdmi_phy_enable_powerdown(hdmi, false); | |
| /* Toggle TMDS enable. */ | |
| dw_hdmi_phy_enable_tmds(hdmi, 0); | |
| dw_hdmi_phy_enable_tmds(hdmi, 1); | |
| return 0; | |
| } | |
| dw_hdmi_phy_gen2_txpwron(hdmi, 1); | |
| dw_hdmi_phy_gen2_pddq(hdmi, 0); | |
| /* Wait for PHY PLL lock */ | |
| for (i = 0; i < 5; ++i) { | |
| val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK; | |
| if (val) | |
| break; | |
| usleep_range(1000, 2000); | |
| } | |
| if (!val) { | |
| dev_err(hdmi->dev, "PHY PLL failed to lock\n"); | |
| return -ETIMEDOUT; | |
| } | |
| dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i); | |
| return 0; | |
| } | |
| /* | |
| * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the available | |
| * information the DWC MHL PHY has the same register layout and is thus also | |
| * supported by this function. | |
| */ | |
| static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi, | |
| const struct dw_hdmi_plat_data *pdata, | |
| unsigned long mpixelclock) | |
| { | |
| const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg; | |
| const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr; | |
| const struct dw_hdmi_phy_config *phy_config = pdata->phy_config; | |
| /* TOFIX Will need 420 specific PHY configuration tables */ | |
| /* PLL/MPLL Cfg - always match on final entry */ | |
| for (; mpll_config->mpixelclock != ~0UL; mpll_config++) | |
| if (mpixelclock <= mpll_config->mpixelclock) | |
| break; | |
| for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++) | |
| if (mpixelclock <= curr_ctrl->mpixelclock) | |
| break; | |
| for (; phy_config->mpixelclock != ~0UL; phy_config++) | |
| if (mpixelclock <= phy_config->mpixelclock) | |
| break; | |
| if (mpll_config->mpixelclock == ~0UL || | |
| curr_ctrl->mpixelclock == ~0UL || | |
| phy_config->mpixelclock == ~0UL) | |
| return -EINVAL; | |
| dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce, | |
| HDMI_3D_TX_PHY_CPCE_CTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp, | |
| HDMI_3D_TX_PHY_GMPCTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0], | |
| HDMI_3D_TX_PHY_CURRCTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK, | |
| HDMI_3D_TX_PHY_MSM_CTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM); | |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr, | |
| HDMI_3D_TX_PHY_CKSYMTXCTRL); | |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr, | |
| HDMI_3D_TX_PHY_VLEVCTRL); | |
| /* Override and disable clock termination. */ | |
| dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE, | |
| HDMI_3D_TX_PHY_CKCALCTRL); | |
| return 0; | |
| } | |
| static int hdmi_phy_configure(struct dw_hdmi *hdmi, | |
| const struct drm_display_info *display) | |
| { | |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; | |
| const struct dw_hdmi_plat_data *pdata = hdmi->plat_data; | |
| unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock; | |
| unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mtmdsclock; | |
| int ret; | |
| dw_hdmi_phy_power_off(hdmi); | |
| dw_hdmi_set_high_tmds_clock_ratio(hdmi, display); | |
| /* Leave low power consumption mode by asserting SVSRET. */ | |
| if (phy->has_svsret) | |
| dw_hdmi_phy_enable_svsret(hdmi, 1); | |
| dw_hdmi_phy_gen2_reset(hdmi); | |
| hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST); | |
| dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2); | |
| /* Write to the PHY as configured by the platform */ | |
| if (pdata->configure_phy) | |
| ret = pdata->configure_phy(hdmi, pdata->priv_data, mpixelclock); | |
| else | |
| ret = phy->configure(hdmi, pdata, mpixelclock); | |
| if (ret) { | |
| dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n", | |
| mpixelclock); | |
| return ret; | |
| } | |
| /* Wait for resuming transmission of TMDS clock and data */ | |
| if (mtmdsclock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ) | |
| msleep(100); | |
| return dw_hdmi_phy_power_on(hdmi); | |
| } | |
| static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, | |
| const struct drm_display_info *display, | |
| const struct drm_display_mode *mode) | |
| { | |
| int i, ret; | |
| /* HDMI Phy spec says to do the phy initialization sequence twice */ | |
| for (i = 0; i < 2; i++) { | |
| dw_hdmi_phy_sel_data_en_pol(hdmi, 1); | |
| dw_hdmi_phy_sel_interface_control(hdmi, 0); | |
| ret = hdmi_phy_configure(hdmi, display); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data) | |
| { | |
| dw_hdmi_phy_power_off(hdmi); | |
| } | |
| enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, | |
| void *data) | |
| { | |
| return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ? | |
| connector_status_connected : connector_status_disconnected; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd); | |
| void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data, | |
| bool force, bool disabled, bool rxsense) | |
| { | |
| u8 old_mask = hdmi->phy_mask; | |
| if (force || disabled || !rxsense) | |
| hdmi->phy_mask |= HDMI_PHY_RX_SENSE; | |
| else | |
| hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE; | |
| if (old_mask != hdmi->phy_mask) | |
| hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd); | |
| void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data) | |
| { | |
| /* | |
| * Configure the PHY RX SENSE and HPD interrupts polarities and clear | |
| * any pending interrupt. | |
| */ | |
| hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0); | |
| hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, | |
| HDMI_IH_PHY_STAT0); | |
| /* Enable cable hot plug irq. */ | |
| hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); | |
| /* Clear and unmute interrupts. */ | |
| hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, | |
| HDMI_IH_PHY_STAT0); | |
| hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), | |
| HDMI_IH_MUTE_PHY_STAT0); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd); | |
| static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = { | |
| .init = dw_hdmi_phy_init, | |
| .disable = dw_hdmi_phy_disable, | |
| .read_hpd = dw_hdmi_phy_read_hpd, | |
| .update_hpd = dw_hdmi_phy_update_hpd, | |
| .setup_hpd = dw_hdmi_phy_setup_hpd, | |
| }; | |
| /* ----------------------------------------------------------------------------- | |
| * HDMI TX Setup | |
| */ | |
| static void hdmi_tx_hdcp_config(struct dw_hdmi *hdmi) | |
| { | |
| u8 de; | |
| if (hdmi->hdmi_data.video_mode.mdataenablepolarity) | |
| de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH; | |
| else | |
| de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW; | |
| /* disable rx detect */ | |
| hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_DISABLE, | |
| HDMI_A_HDCPCFG0_RXDETECT_MASK, HDMI_A_HDCPCFG0); | |
| hdmi_modb(hdmi, de, HDMI_A_VIDPOLCFG_DATAENPOL_MASK, HDMI_A_VIDPOLCFG); | |
| hdmi_modb(hdmi, HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE, | |
| HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK, HDMI_A_HDCPCFG1); | |
| } | |
| static void hdmi_config_AVI(struct dw_hdmi *hdmi, | |
| const struct drm_connector *connector, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct hdmi_avi_infoframe frame; | |
| u8 val; | |
| /* Initialise info frame from DRM mode */ | |
| drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); | |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) { | |
| drm_hdmi_avi_infoframe_quant_range(&frame, connector, mode, | |
| hdmi->hdmi_data.rgb_limited_range ? | |
| HDMI_QUANTIZATION_RANGE_LIMITED : | |
| HDMI_QUANTIZATION_RANGE_FULL); | |
| } else { | |
| frame.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT; | |
| frame.ycc_quantization_range = | |
| HDMI_YCC_QUANTIZATION_RANGE_LIMITED; | |
| } | |
| if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) | |
| frame.colorspace = HDMI_COLORSPACE_YUV444; | |
| else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) | |
| frame.colorspace = HDMI_COLORSPACE_YUV422; | |
| else if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format)) | |
| frame.colorspace = HDMI_COLORSPACE_YUV420; | |
| else | |
| frame.colorspace = HDMI_COLORSPACE_RGB; | |
| /* Set up colorimetry */ | |
| if (!hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) { | |
| switch (hdmi->hdmi_data.enc_out_encoding) { | |
| case V4L2_YCBCR_ENC_601: | |
| if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601) | |
| frame.colorimetry = HDMI_COLORIMETRY_EXTENDED; | |
| else | |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_601; | |
| frame.extended_colorimetry = | |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; | |
| break; | |
| case V4L2_YCBCR_ENC_709: | |
| if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709) | |
| frame.colorimetry = HDMI_COLORIMETRY_EXTENDED; | |
| else | |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_709; | |
| frame.extended_colorimetry = | |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_709; | |
| break; | |
| default: /* Carries no data */ | |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_601; | |
| frame.extended_colorimetry = | |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; | |
| break; | |
| } | |
| } else { | |
| frame.colorimetry = HDMI_COLORIMETRY_NONE; | |
| frame.extended_colorimetry = | |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; | |
| } | |
| /* | |
| * The Designware IP uses a different byte format from standard | |
| * AVI info frames, though generally the bits are in the correct | |
| * bytes. | |
| */ | |
| /* | |
| * AVI data byte 1 differences: Colorspace in bits 0,1 rather than 5,6, | |
| * scan info in bits 4,5 rather than 0,1 and active aspect present in | |
| * bit 6 rather than 4. | |
| */ | |
| val = (frame.scan_mode & 3) << 4 | (frame.colorspace & 3); | |
| if (frame.active_aspect & 15) | |
| val |= HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT; | |
| if (frame.top_bar || frame.bottom_bar) | |
| val |= HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR; | |
| if (frame.left_bar || frame.right_bar) | |
| val |= HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR; | |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF0); | |
| /* AVI data byte 2 differences: none */ | |
| val = ((frame.colorimetry & 0x3) << 6) | | |
| ((frame.picture_aspect & 0x3) << 4) | | |
| (frame.active_aspect & 0xf); | |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF1); | |
| /* AVI data byte 3 differences: none */ | |
| val = ((frame.extended_colorimetry & 0x7) << 4) | | |
| ((frame.quantization_range & 0x3) << 2) | | |
| (frame.nups & 0x3); | |
| if (frame.itc) | |
| val |= HDMI_FC_AVICONF2_IT_CONTENT_VALID; | |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF2); | |
| /* AVI data byte 4 differences: none */ | |
| val = frame.video_code & 0x7f; | |
| hdmi_writeb(hdmi, val, HDMI_FC_AVIVID); | |
| /* AVI Data Byte 5- set up input and output pixel repetition */ | |
| val = (((hdmi->hdmi_data.video_mode.mpixelrepetitioninput + 1) << | |
| HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET) & | |
| HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK) | | |
| ((hdmi->hdmi_data.video_mode.mpixelrepetitionoutput << | |
| HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET) & | |
| HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK); | |
| hdmi_writeb(hdmi, val, HDMI_FC_PRCONF); | |
| /* | |
| * AVI data byte 5 differences: content type in 0,1 rather than 4,5, | |
| * ycc range in bits 2,3 rather than 6,7 | |
| */ | |
| val = ((frame.ycc_quantization_range & 0x3) << 2) | | |
| (frame.content_type & 0x3); | |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF3); | |
| /* AVI Data Bytes 6-13 */ | |
| hdmi_writeb(hdmi, frame.top_bar & 0xff, HDMI_FC_AVIETB0); | |
| hdmi_writeb(hdmi, (frame.top_bar >> 8) & 0xff, HDMI_FC_AVIETB1); | |
| hdmi_writeb(hdmi, frame.bottom_bar & 0xff, HDMI_FC_AVISBB0); | |
| hdmi_writeb(hdmi, (frame.bottom_bar >> 8) & 0xff, HDMI_FC_AVISBB1); | |
| hdmi_writeb(hdmi, frame.left_bar & 0xff, HDMI_FC_AVIELB0); | |
| hdmi_writeb(hdmi, (frame.left_bar >> 8) & 0xff, HDMI_FC_AVIELB1); | |
| hdmi_writeb(hdmi, frame.right_bar & 0xff, HDMI_FC_AVISRB0); | |
| hdmi_writeb(hdmi, (frame.right_bar >> 8) & 0xff, HDMI_FC_AVISRB1); | |
| } | |
| static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi, | |
| const struct drm_connector *connector, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct hdmi_vendor_infoframe frame; | |
| u8 buffer[10]; | |
| ssize_t err; | |
| err = drm_hdmi_vendor_infoframe_from_display_mode(&frame, connector, | |
| mode); | |
| if (err < 0) | |
| /* | |
| * Going into that statement does not means vendor infoframe | |
| * fails. It just informed us that vendor infoframe is not | |
| * needed for the selected mode. Only 4k or stereoscopic 3D | |
| * mode requires vendor infoframe. So just simply return. | |
| */ | |
| return; | |
| err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer)); | |
| if (err < 0) { | |
| dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n", | |
| err); | |
| return; | |
| } | |
| hdmi_mask_writeb(hdmi, 0, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET, | |
| HDMI_FC_DATAUTO0_VSD_MASK); | |
| /* Set the length of HDMI vendor specific InfoFrame payload */ | |
| hdmi_writeb(hdmi, buffer[2], HDMI_FC_VSDSIZE); | |
| /* Set 24bit IEEE Registration Identifier */ | |
| hdmi_writeb(hdmi, buffer[4], HDMI_FC_VSDIEEEID0); | |
| hdmi_writeb(hdmi, buffer[5], HDMI_FC_VSDIEEEID1); | |
| hdmi_writeb(hdmi, buffer[6], HDMI_FC_VSDIEEEID2); | |
| /* Set HDMI_Video_Format and HDMI_VIC/3D_Structure */ | |
| hdmi_writeb(hdmi, buffer[7], HDMI_FC_VSDPAYLOAD0); | |
| hdmi_writeb(hdmi, buffer[8], HDMI_FC_VSDPAYLOAD1); | |
| if (frame.s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) | |
| hdmi_writeb(hdmi, buffer[9], HDMI_FC_VSDPAYLOAD2); | |
| /* Packet frame interpolation */ | |
| hdmi_writeb(hdmi, 1, HDMI_FC_DATAUTO1); | |
| /* Auto packets per frame and line spacing */ | |
| hdmi_writeb(hdmi, 0x11, HDMI_FC_DATAUTO2); | |
| /* Configures the Frame Composer On RDRB mode */ | |
| hdmi_mask_writeb(hdmi, 1, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET, | |
| HDMI_FC_DATAUTO0_VSD_MASK); | |
| } | |
| static void hdmi_config_drm_infoframe(struct dw_hdmi *hdmi, | |
| const struct drm_connector *connector) | |
| { | |
| const struct drm_connector_state *conn_state = connector->state; | |
| struct hdmi_drm_infoframe frame; | |
| u8 buffer[30]; | |
| ssize_t err; | |
| int i; | |
| if (!hdmi->plat_data->use_drm_infoframe) | |
| return; | |
| hdmi_modb(hdmi, HDMI_FC_PACKET_TX_EN_DRM_DISABLE, | |
| HDMI_FC_PACKET_TX_EN_DRM_MASK, HDMI_FC_PACKET_TX_EN); | |
| err = drm_hdmi_infoframe_set_hdr_metadata(&frame, conn_state); | |
| if (err < 0) | |
| return; | |
| err = hdmi_drm_infoframe_pack(&frame, buffer, sizeof(buffer)); | |
| if (err < 0) { | |
| dev_err(hdmi->dev, "Failed to pack drm infoframe: %zd\n", err); | |
| return; | |
| } | |
| hdmi_writeb(hdmi, frame.version, HDMI_FC_DRM_HB0); | |
| hdmi_writeb(hdmi, frame.length, HDMI_FC_DRM_HB1); | |
| for (i = 0; i < frame.length; i++) | |
| hdmi_writeb(hdmi, buffer[4 + i], HDMI_FC_DRM_PB0 + i); | |
| hdmi_writeb(hdmi, 1, HDMI_FC_DRM_UP); | |
| hdmi_modb(hdmi, HDMI_FC_PACKET_TX_EN_DRM_ENABLE, | |
| HDMI_FC_PACKET_TX_EN_DRM_MASK, HDMI_FC_PACKET_TX_EN); | |
| } | |
| static void hdmi_av_composer(struct dw_hdmi *hdmi, | |
| const struct drm_display_info *display, | |
| const struct drm_display_mode *mode) | |
| { | |
| u8 inv_val, bytes; | |
| const struct drm_hdmi_info *hdmi_info = &display->hdmi; | |
| struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode; | |
| int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len; | |
| unsigned int vdisplay, hdisplay; | |
| vmode->mpixelclock = mode->clock * 1000; | |
| dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock); | |
| vmode->mtmdsclock = vmode->mpixelclock; | |
| if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) { | |
| switch (hdmi_bus_fmt_color_depth( | |
| hdmi->hdmi_data.enc_out_bus_format)) { | |
| case 16: | |
| vmode->mtmdsclock = vmode->mpixelclock * 2; | |
| break; | |
| case 12: | |
| vmode->mtmdsclock = vmode->mpixelclock * 3 / 2; | |
| break; | |
| case 10: | |
| vmode->mtmdsclock = vmode->mpixelclock * 5 / 4; | |
| break; | |
| } | |
| } | |
| if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format)) | |
| vmode->mtmdsclock /= 2; | |
| dev_dbg(hdmi->dev, "final tmdsclock = %d\n", vmode->mtmdsclock); | |
| /* Set up HDMI_FC_INVIDCONF */ | |
| inv_val = (hdmi->hdmi_data.hdcp_enable || | |
| (dw_hdmi_support_scdc(hdmi, display) && | |
| (vmode->mtmdsclock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ || | |
| hdmi_info->scdc.scrambling.low_rates)) ? | |
| HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE : | |
| HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE); | |
| inv_val |= mode->flags & DRM_MODE_FLAG_PVSYNC ? | |
| HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH : | |
| HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW; | |
| inv_val |= mode->flags & DRM_MODE_FLAG_PHSYNC ? | |
| HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH : | |
| HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW; | |
| inv_val |= (vmode->mdataenablepolarity ? | |
| HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH : | |
| HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW); | |
| if (hdmi->vic == 39) | |
| inv_val |= HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH; | |
| else | |
| inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ? | |
| HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH : | |
| HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW; | |
| inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ? | |
| HDMI_FC_INVIDCONF_IN_I_P_INTERLACED : | |
| HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE; | |
| inv_val |= hdmi->sink_is_hdmi ? | |
| HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE : | |
| HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE; | |
| hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF); | |
| hdisplay = mode->hdisplay; | |
| hblank = mode->htotal - mode->hdisplay; | |
| h_de_hs = mode->hsync_start - mode->hdisplay; | |
| hsync_len = mode->hsync_end - mode->hsync_start; | |
| /* | |
| * When we're setting a YCbCr420 mode, we need | |
| * to adjust the horizontal timing to suit. | |
| */ | |
| if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format)) { | |
| hdisplay /= 2; | |
| hblank /= 2; | |
| h_de_hs /= 2; | |
| hsync_len /= 2; | |
| } | |
| vdisplay = mode->vdisplay; | |
| vblank = mode->vtotal - mode->vdisplay; | |
| v_de_vs = mode->vsync_start - mode->vdisplay; | |
| vsync_len = mode->vsync_end - mode->vsync_start; | |
| /* | |
| * When we're setting an interlaced mode, we need | |
| * to adjust the vertical timing to suit. | |
| */ | |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { | |
| vdisplay /= 2; | |
| vblank /= 2; | |
| v_de_vs /= 2; | |
| vsync_len /= 2; | |
| } | |
| /* Scrambling Control */ | |
| if (dw_hdmi_support_scdc(hdmi, display)) { | |
| if (vmode->mtmdsclock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ || | |
| hdmi_info->scdc.scrambling.low_rates) { | |
| /* | |
| * HDMI2.0 Specifies the following procedure: | |
| * After the Source Device has determined that | |
| * SCDC_Present is set (=1), the Source Device should | |
| * write the accurate Version of the Source Device | |
| * to the Source Version field in the SCDCS. | |
| * Source Devices compliant shall set the | |
| * Source Version = 1. | |
| */ | |
| drm_scdc_readb(hdmi->ddc, SCDC_SINK_VERSION, | |
| &bytes); | |
| drm_scdc_writeb(hdmi->ddc, SCDC_SOURCE_VERSION, | |
| min_t(u8, bytes, SCDC_MIN_SOURCE_VERSION)); | |
| /* Enabled Scrambling in the Sink */ | |
| drm_scdc_set_scrambling(hdmi->curr_conn, 1); | |
| /* | |
| * To activate the scrambler feature, you must ensure | |
| * that the quasi-static configuration bit | |
| * fc_invidconf.HDCP_keepout is set at configuration | |
| * time, before the required mc_swrstzreq.tmdsswrst_req | |
| * reset request is issued. | |
| */ | |
| hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, | |
| HDMI_MC_SWRSTZ); | |
| hdmi_writeb(hdmi, 1, HDMI_FC_SCRAMBLER_CTRL); | |
| } else { | |
| hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL); | |
| hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, | |
| HDMI_MC_SWRSTZ); | |
| drm_scdc_set_scrambling(hdmi->curr_conn, 0); | |
| } | |
| } | |
| /* Set up horizontal active pixel width */ | |
| hdmi_writeb(hdmi, hdisplay >> 8, HDMI_FC_INHACTV1); | |
| hdmi_writeb(hdmi, hdisplay, HDMI_FC_INHACTV0); | |
| /* Set up vertical active lines */ | |
| hdmi_writeb(hdmi, vdisplay >> 8, HDMI_FC_INVACTV1); | |
| hdmi_writeb(hdmi, vdisplay, HDMI_FC_INVACTV0); | |
| /* Set up horizontal blanking pixel region width */ | |
| hdmi_writeb(hdmi, hblank >> 8, HDMI_FC_INHBLANK1); | |
| hdmi_writeb(hdmi, hblank, HDMI_FC_INHBLANK0); | |
| /* Set up vertical blanking pixel region width */ | |
| hdmi_writeb(hdmi, vblank, HDMI_FC_INVBLANK); | |
| /* Set up HSYNC active edge delay width (in pixel clks) */ | |
| hdmi_writeb(hdmi, h_de_hs >> 8, HDMI_FC_HSYNCINDELAY1); | |
| hdmi_writeb(hdmi, h_de_hs, HDMI_FC_HSYNCINDELAY0); | |
| /* Set up VSYNC active edge delay (in lines) */ | |
| hdmi_writeb(hdmi, v_de_vs, HDMI_FC_VSYNCINDELAY); | |
| /* Set up HSYNC active pulse width (in pixel clks) */ | |
| hdmi_writeb(hdmi, hsync_len >> 8, HDMI_FC_HSYNCINWIDTH1); | |
| hdmi_writeb(hdmi, hsync_len, HDMI_FC_HSYNCINWIDTH0); | |
| /* Set up VSYNC active edge delay (in lines) */ | |
| hdmi_writeb(hdmi, vsync_len, HDMI_FC_VSYNCINWIDTH); | |
| } | |
| /* HDMI Initialization Step B.4 */ | |
| static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi) | |
| { | |
| /* control period minimum duration */ | |
| hdmi_writeb(hdmi, 12, HDMI_FC_CTRLDUR); | |
| hdmi_writeb(hdmi, 32, HDMI_FC_EXCTRLDUR); | |
| hdmi_writeb(hdmi, 1, HDMI_FC_EXCTRLSPAC); | |
| /* Set to fill TMDS data channels */ | |
| hdmi_writeb(hdmi, 0x0B, HDMI_FC_CH0PREAM); | |
| hdmi_writeb(hdmi, 0x16, HDMI_FC_CH1PREAM); | |
| hdmi_writeb(hdmi, 0x21, HDMI_FC_CH2PREAM); | |
| /* Enable pixel clock and tmds data path */ | |
| hdmi->mc_clkdis |= HDMI_MC_CLKDIS_HDCPCLK_DISABLE | | |
| HDMI_MC_CLKDIS_CSCCLK_DISABLE | | |
| HDMI_MC_CLKDIS_AUDCLK_DISABLE | | |
| HDMI_MC_CLKDIS_PREPCLK_DISABLE | | |
| HDMI_MC_CLKDIS_TMDSCLK_DISABLE; | |
| hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_PIXELCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_TMDSCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| /* Enable csc path */ | |
| if (is_csc_needed(hdmi)) { | |
| hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CSCCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH, | |
| HDMI_MC_FLOWCTRL); | |
| } else { | |
| hdmi->mc_clkdis |= HDMI_MC_CLKDIS_CSCCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS, | |
| HDMI_MC_FLOWCTRL); | |
| } | |
| } | |
| /* Workaround to clear the overflow condition */ | |
| static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi) | |
| { | |
| unsigned int count; | |
| unsigned int i; | |
| u8 val; | |
| /* | |
| * Under some circumstances the Frame Composer arithmetic unit can miss | |
| * an FC register write due to being busy processing the previous one. | |
| * The issue can be worked around by issuing a TMDS software reset and | |
| * then write one of the FC registers several times. | |
| * | |
| * The number of iterations matters and depends on the HDMI TX revision | |
| * (and possibly on the platform). | |
| * 4 iterations for i.MX6Q(v1.30a) and 1 iteration for others. | |
| * i.MX6DL (v1.31a), Allwinner SoCs (v1.32a), Rockchip RK3288 SoC (v2.00a), | |
| * Amlogic Meson GX SoCs (v2.01a), RK3328/RK3399 SoCs (v2.11a) | |
| * and i.MX8MPlus (v2.13a) have been identified as needing the workaround | |
| * with a single iteration. | |
| */ | |
| switch (hdmi->version) { | |
| case 0x130a: | |
| count = 4; | |
| break; | |
| default: | |
| count = 1; | |
| break; | |
| } | |
| /* TMDS software reset */ | |
| hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, HDMI_MC_SWRSTZ); | |
| val = hdmi_readb(hdmi, HDMI_FC_INVIDCONF); | |
| for (i = 0; i < count; i++) | |
| hdmi_writeb(hdmi, val, HDMI_FC_INVIDCONF); | |
| } | |
| static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi) | |
| { | |
| hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK, | |
| HDMI_IH_MUTE_FC_STAT2); | |
| } | |
| static int dw_hdmi_setup(struct dw_hdmi *hdmi, | |
| const struct drm_connector *connector, | |
| const struct drm_display_mode *mode) | |
| { | |
| int ret; | |
| hdmi_disable_overflow_interrupts(hdmi); | |
| hdmi->vic = drm_match_cea_mode(mode); | |
| if (!hdmi->vic) { | |
| dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n"); | |
| } else { | |
| dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic); | |
| } | |
| if ((hdmi->vic == 6) || (hdmi->vic == 7) || | |
| (hdmi->vic == 21) || (hdmi->vic == 22) || | |
| (hdmi->vic == 2) || (hdmi->vic == 3) || | |
| (hdmi->vic == 17) || (hdmi->vic == 18)) | |
| hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601; | |
| else | |
| hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709; | |
| hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0; | |
| hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0; | |
| if (hdmi->hdmi_data.enc_in_bus_format == MEDIA_BUS_FMT_FIXED) | |
| hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24; | |
| /* TOFIX: Get input encoding from plat data or fallback to none */ | |
| if (hdmi->plat_data->input_bus_encoding) | |
| hdmi->hdmi_data.enc_in_encoding = | |
| hdmi->plat_data->input_bus_encoding; | |
| else | |
| hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT; | |
| if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED) | |
| hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24; | |
| hdmi->hdmi_data.rgb_limited_range = hdmi->sink_is_hdmi && | |
| drm_default_rgb_quant_range(mode) == | |
| HDMI_QUANTIZATION_RANGE_LIMITED; | |
| hdmi->hdmi_data.pix_repet_factor = 0; | |
| hdmi->hdmi_data.hdcp_enable = 0; | |
| hdmi->hdmi_data.video_mode.mdataenablepolarity = true; | |
| /* HDMI Initialization Step B.1 */ | |
| hdmi_av_composer(hdmi, &connector->display_info, mode); | |
| /* HDMI Initializateion Step B.2 */ | |
| ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, | |
| &connector->display_info, | |
| &hdmi->previous_mode); | |
| if (ret) | |
| return ret; | |
| hdmi->phy.enabled = true; | |
| /* HDMI Initialization Step B.3 */ | |
| dw_hdmi_enable_video_path(hdmi); | |
| if (hdmi->sink_has_audio) { | |
| dev_dbg(hdmi->dev, "sink has audio support\n"); | |
| /* HDMI Initialization Step E - Configure audio */ | |
| hdmi_clk_regenerator_update_pixel_clock(hdmi); | |
| hdmi_enable_audio_clk(hdmi, hdmi->audio_enable); | |
| } | |
| /* not for DVI mode */ | |
| if (hdmi->sink_is_hdmi) { | |
| dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__); | |
| /* HDMI Initialization Step F - Configure AVI InfoFrame */ | |
| hdmi_config_AVI(hdmi, connector, mode); | |
| hdmi_config_vendor_specific_infoframe(hdmi, connector, mode); | |
| hdmi_config_drm_infoframe(hdmi, connector); | |
| } else { | |
| dev_dbg(hdmi->dev, "%s DVI mode\n", __func__); | |
| } | |
| hdmi_video_packetize(hdmi); | |
| hdmi_video_csc(hdmi); | |
| hdmi_video_sample(hdmi); | |
| hdmi_tx_hdcp_config(hdmi); | |
| dw_hdmi_clear_overflow(hdmi); | |
| return 0; | |
| } | |
| static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi) | |
| { | |
| u8 ih_mute; | |
| /* | |
| * Boot up defaults are: | |
| * HDMI_IH_MUTE = 0x03 (disabled) | |
| * HDMI_IH_MUTE_* = 0x00 (enabled) | |
| * | |
| * Disable top level interrupt bits in HDMI block | |
| */ | |
| ih_mute = hdmi_readb(hdmi, HDMI_IH_MUTE) | | |
| HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT | | |
| HDMI_IH_MUTE_MUTE_ALL_INTERRUPT; | |
| hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE); | |
| /* by default mask all interrupts */ | |
| hdmi_writeb(hdmi, 0xff, HDMI_VP_MASK); | |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK1); | |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK2); | |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_MASK0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_INT_ADDR); | |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_CTLINT_ADDR); | |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_INT); | |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_SPDIFINT); | |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_HBR_MASK); | |
| hdmi_writeb(hdmi, 0xff, HDMI_GP_MASK); | |
| hdmi_writeb(hdmi, 0xff, HDMI_A_APIINTMSK); | |
| hdmi_writeb(hdmi, 0xff, HDMI_I2CM_INT); | |
| hdmi_writeb(hdmi, 0xff, HDMI_I2CM_CTLINT); | |
| /* Disable interrupts in the IH_MUTE_* registers */ | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT1); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT2); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AS_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_PHY_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CM_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_CEC_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_VP_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CMPHY_STAT0); | |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AHBDMAAUD_STAT0); | |
| /* Enable top level interrupt bits in HDMI block */ | |
| ih_mute &= ~(HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT | | |
| HDMI_IH_MUTE_MUTE_ALL_INTERRUPT); | |
| hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE); | |
| } | |
| static void dw_hdmi_poweron(struct dw_hdmi *hdmi) | |
| { | |
| hdmi->bridge_is_on = true; | |
| /* | |
| * The curr_conn field is guaranteed to be valid here, as this function | |
| * is only be called when !hdmi->disabled. | |
| */ | |
| dw_hdmi_setup(hdmi, hdmi->curr_conn, &hdmi->previous_mode); | |
| } | |
| static void dw_hdmi_poweroff(struct dw_hdmi *hdmi) | |
| { | |
| if (hdmi->phy.enabled) { | |
| hdmi->phy.ops->disable(hdmi, hdmi->phy.data); | |
| hdmi->phy.enabled = false; | |
| } | |
| hdmi->bridge_is_on = false; | |
| } | |
| static void dw_hdmi_update_power(struct dw_hdmi *hdmi) | |
| { | |
| int force = hdmi->force; | |
| if (hdmi->disabled) { | |
| force = DRM_FORCE_OFF; | |
| } else if (force == DRM_FORCE_UNSPECIFIED) { | |
| if (hdmi->rxsense) | |
| force = DRM_FORCE_ON; | |
| else | |
| force = DRM_FORCE_OFF; | |
| } | |
| if (force == DRM_FORCE_OFF) { | |
| if (hdmi->bridge_is_on) | |
| dw_hdmi_poweroff(hdmi); | |
| } else { | |
| if (!hdmi->bridge_is_on) | |
| dw_hdmi_poweron(hdmi); | |
| } | |
| } | |
| /* | |
| * Adjust the detection of RXSENSE according to whether we have a forced | |
| * connection mode enabled, or whether we have been disabled. There is | |
| * no point processing RXSENSE interrupts if we have a forced connection | |
| * state, or DRM has us disabled. | |
| * | |
| * We also disable rxsense interrupts when we think we're disconnected | |
| * to avoid floating TDMS signals giving false rxsense interrupts. | |
| * | |
| * Note: we still need to listen for HPD interrupts even when DRM has us | |
| * disabled so that we can detect a connect event. | |
| */ | |
| static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi) | |
| { | |
| if (hdmi->phy.ops->update_hpd) | |
| hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data, | |
| hdmi->force, hdmi->disabled, | |
| hdmi->rxsense); | |
| } | |
| static enum drm_connector_status dw_hdmi_detect(struct dw_hdmi *hdmi) | |
| { | |
| enum drm_connector_status result; | |
| result = hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data); | |
| hdmi->last_connector_result = result; | |
| return result; | |
| } | |
| static const struct drm_edid *dw_hdmi_edid_read(struct dw_hdmi *hdmi, | |
| struct drm_connector *connector) | |
| { | |
| const struct drm_edid *drm_edid; | |
| const struct edid *edid; | |
| if (!hdmi->ddc) | |
| return NULL; | |
| drm_edid = drm_edid_read_ddc(connector, hdmi->ddc); | |
| if (!drm_edid) { | |
| dev_dbg(hdmi->dev, "failed to get edid\n"); | |
| return NULL; | |
| } | |
| /* | |
| * FIXME: This should use connector->display_info.is_hdmi and | |
| * connector->display_info.has_audio from a path that has read the EDID | |
| * and called drm_edid_connector_update(). | |
| */ | |
| edid = drm_edid_raw(drm_edid); | |
| dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n", | |
| edid->width_cm, edid->height_cm); | |
| hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); | |
| hdmi->sink_has_audio = drm_detect_monitor_audio(edid); | |
| return drm_edid; | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * DRM Connector Operations | |
| */ | |
| static enum drm_connector_status | |
| dw_hdmi_connector_detect(struct drm_connector *connector, bool force) | |
| { | |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, | |
| connector); | |
| return dw_hdmi_detect(hdmi); | |
| } | |
| static int dw_hdmi_connector_get_modes(struct drm_connector *connector) | |
| { | |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, | |
| connector); | |
| const struct drm_edid *drm_edid; | |
| int ret; | |
| drm_edid = dw_hdmi_edid_read(hdmi, connector); | |
| drm_edid_connector_update(connector, drm_edid); | |
| cec_notifier_set_phys_addr(hdmi->cec_notifier, | |
| connector->display_info.source_physical_address); | |
| ret = drm_edid_connector_add_modes(connector); | |
| drm_edid_free(drm_edid); | |
| return ret; | |
| } | |
| static int dw_hdmi_connector_atomic_check(struct drm_connector *connector, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_connector_state *old_state = | |
| drm_atomic_get_old_connector_state(state, connector); | |
| struct drm_connector_state *new_state = | |
| drm_atomic_get_new_connector_state(state, connector); | |
| struct drm_crtc *crtc = new_state->crtc; | |
| struct drm_crtc_state *crtc_state; | |
| if (!crtc) | |
| return 0; | |
| if (!drm_connector_atomic_hdr_metadata_equal(old_state, new_state)) { | |
| crtc_state = drm_atomic_get_crtc_state(state, crtc); | |
| if (IS_ERR(crtc_state)) | |
| return PTR_ERR(crtc_state); | |
| crtc_state->mode_changed = true; | |
| } | |
| return 0; | |
| } | |
| static void dw_hdmi_connector_force(struct drm_connector *connector) | |
| { | |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, | |
| connector); | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->force = connector->force; | |
| dw_hdmi_update_power(hdmi); | |
| dw_hdmi_update_phy_mask(hdmi); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static const struct drm_connector_funcs dw_hdmi_connector_funcs = { | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .detect = dw_hdmi_connector_detect, | |
| .destroy = drm_connector_cleanup, | |
| .force = dw_hdmi_connector_force, | |
| .reset = drm_atomic_helper_connector_reset, | |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| }; | |
| static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = { | |
| .get_modes = dw_hdmi_connector_get_modes, | |
| .atomic_check = dw_hdmi_connector_atomic_check, | |
| }; | |
| static int dw_hdmi_connector_create(struct dw_hdmi *hdmi) | |
| { | |
| struct drm_connector *connector = &hdmi->connector; | |
| struct cec_connector_info conn_info; | |
| struct cec_notifier *notifier; | |
| if (hdmi->version >= 0x200a) | |
| connector->ycbcr_420_allowed = | |
| hdmi->plat_data->ycbcr_420_allowed; | |
| else | |
| connector->ycbcr_420_allowed = false; | |
| connector->interlace_allowed = 1; | |
| connector->polled = DRM_CONNECTOR_POLL_HPD; | |
| drm_connector_helper_add(connector, &dw_hdmi_connector_helper_funcs); | |
| drm_connector_init_with_ddc(hdmi->bridge.dev, connector, | |
| &dw_hdmi_connector_funcs, | |
| DRM_MODE_CONNECTOR_HDMIA, | |
| hdmi->ddc); | |
| /* | |
| * drm_connector_attach_max_bpc_property() requires the | |
| * connector to have a state. | |
| */ | |
| drm_atomic_helper_connector_reset(connector); | |
| drm_connector_attach_max_bpc_property(connector, 8, 16); | |
| if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe) | |
| drm_connector_attach_hdr_output_metadata_property(connector); | |
| drm_connector_attach_encoder(connector, hdmi->bridge.encoder); | |
| cec_fill_conn_info_from_drm(&conn_info, connector); | |
| notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info); | |
| if (!notifier) | |
| return -ENOMEM; | |
| mutex_lock(&hdmi->cec_notifier_mutex); | |
| hdmi->cec_notifier = notifier; | |
| mutex_unlock(&hdmi->cec_notifier_mutex); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * DRM Bridge Operations | |
| */ | |
| /* | |
| * Possible output formats : | |
| * - MEDIA_BUS_FMT_UYYVYY16_0_5X48, | |
| * - MEDIA_BUS_FMT_UYYVYY12_0_5X36, | |
| * - MEDIA_BUS_FMT_UYYVYY10_0_5X30, | |
| * - MEDIA_BUS_FMT_UYYVYY8_0_5X24, | |
| * - MEDIA_BUS_FMT_RGB888_1X24, | |
| * - MEDIA_BUS_FMT_YUV16_1X48, | |
| * - MEDIA_BUS_FMT_RGB161616_1X48, | |
| * - MEDIA_BUS_FMT_UYVY12_1X24, | |
| * - MEDIA_BUS_FMT_YUV12_1X36, | |
| * - MEDIA_BUS_FMT_RGB121212_1X36, | |
| * - MEDIA_BUS_FMT_UYVY10_1X20, | |
| * - MEDIA_BUS_FMT_YUV10_1X30, | |
| * - MEDIA_BUS_FMT_RGB101010_1X30, | |
| * - MEDIA_BUS_FMT_UYVY8_1X16, | |
| * - MEDIA_BUS_FMT_YUV8_1X24, | |
| */ | |
| /* Can return a maximum of 11 possible output formats for a mode/connector */ | |
| #define MAX_OUTPUT_SEL_FORMATS 11 | |
| static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, | |
| struct drm_bridge_state *bridge_state, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state, | |
| unsigned int *num_output_fmts) | |
| { | |
| struct drm_connector *conn = conn_state->connector; | |
| struct drm_display_info *info = &conn->display_info; | |
| struct drm_display_mode *mode = &crtc_state->mode; | |
| u8 max_bpc = conn_state->max_requested_bpc; | |
| bool is_hdmi2_sink = info->hdmi.scdc.supported || | |
| (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR420)); | |
| u32 *output_fmts; | |
| unsigned int i = 0; | |
| *num_output_fmts = 0; | |
| output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), | |
| GFP_KERNEL); | |
| if (!output_fmts) | |
| return NULL; | |
| /* If dw-hdmi is the first or only bridge, avoid negociating with ourselves */ | |
| if (list_is_singular(&bridge->encoder->bridge_chain) || | |
| list_is_first(&bridge->chain_node, &bridge->encoder->bridge_chain)) { | |
| *num_output_fmts = 1; | |
| output_fmts[0] = MEDIA_BUS_FMT_FIXED; | |
| return output_fmts; | |
| } | |
| /* | |
| * If the current mode enforces 4:2:0, force the output bus format | |
| * to 4:2:0 and do not add the YUV422/444/RGB formats | |
| */ | |
| if (conn->ycbcr_420_allowed && | |
| (drm_mode_is_420_only(info, mode) || | |
| (is_hdmi2_sink && drm_mode_is_420_also(info, mode)))) { | |
| /* Order bus formats from 16bit to 8bit if supported */ | |
| if (max_bpc >= 16 && info->bpc == 16 && | |
| (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY16_0_5X48; | |
| if (max_bpc >= 12 && info->bpc >= 12 && | |
| (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY12_0_5X36; | |
| if (max_bpc >= 10 && info->bpc >= 10 && | |
| (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30; | |
| /* Default 8bit fallback */ | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24; | |
| if (drm_mode_is_420_only(info, mode)) { | |
| *num_output_fmts = i; | |
| return output_fmts; | |
| } | |
| } | |
| /* | |
| * Order bus formats from 16bit to 8bit and from YUV422 to RGB | |
| * if supported. In any case the default RGB888 format is added | |
| */ | |
| /* Default 8bit RGB fallback */ | |
| output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; | |
| if (max_bpc >= 16 && info->bpc == 16) { | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48; | |
| output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48; | |
| } | |
| if (max_bpc >= 12 && info->bpc >= 12) { | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR422)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24; | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36; | |
| output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36; | |
| } | |
| if (max_bpc >= 10 && info->bpc >= 10) { | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR422)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20; | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30; | |
| output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30; | |
| } | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR422)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16; | |
| if (info->color_formats & BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444)) | |
| output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24; | |
| *num_output_fmts = i; | |
| return output_fmts; | |
| } | |
| /* | |
| * Possible input formats : | |
| * - MEDIA_BUS_FMT_RGB888_1X24 | |
| * - MEDIA_BUS_FMT_YUV8_1X24 | |
| * - MEDIA_BUS_FMT_UYVY8_1X16 | |
| * - MEDIA_BUS_FMT_UYYVYY8_0_5X24 | |
| * - MEDIA_BUS_FMT_RGB101010_1X30 | |
| * - MEDIA_BUS_FMT_YUV10_1X30 | |
| * - MEDIA_BUS_FMT_UYVY10_1X20 | |
| * - MEDIA_BUS_FMT_UYYVYY10_0_5X30 | |
| * - MEDIA_BUS_FMT_RGB121212_1X36 | |
| * - MEDIA_BUS_FMT_YUV12_1X36 | |
| * - MEDIA_BUS_FMT_UYVY12_1X24 | |
| * - MEDIA_BUS_FMT_UYYVYY12_0_5X36 | |
| * - MEDIA_BUS_FMT_RGB161616_1X48 | |
| * - MEDIA_BUS_FMT_YUV16_1X48 | |
| * - MEDIA_BUS_FMT_UYYVYY16_0_5X48 | |
| */ | |
| /* Can return a maximum of 3 possible input formats for an output format */ | |
| #define MAX_INPUT_SEL_FORMATS 3 | |
| static u32 *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, | |
| struct drm_bridge_state *bridge_state, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state, | |
| u32 output_fmt, | |
| unsigned int *num_input_fmts) | |
| { | |
| u32 *input_fmts; | |
| unsigned int i = 0; | |
| *num_input_fmts = 0; | |
| input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), | |
| GFP_KERNEL); | |
| if (!input_fmts) | |
| return NULL; | |
| switch (output_fmt) { | |
| /* If MEDIA_BUS_FMT_FIXED is tested, return default bus format */ | |
| case MEDIA_BUS_FMT_FIXED: | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; | |
| break; | |
| /* 8bit */ | |
| case MEDIA_BUS_FMT_RGB888_1X24: | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16; | |
| break; | |
| case MEDIA_BUS_FMT_YUV8_1X24: | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY8_1X16: | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; | |
| break; | |
| /* 10bit */ | |
| case MEDIA_BUS_FMT_RGB101010_1X30: | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20; | |
| break; | |
| case MEDIA_BUS_FMT_YUV10_1X30: | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY10_1X20: | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30; | |
| break; | |
| /* 12bit */ | |
| case MEDIA_BUS_FMT_RGB121212_1X36: | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24; | |
| break; | |
| case MEDIA_BUS_FMT_YUV12_1X36: | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36; | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36; | |
| break; | |
| case MEDIA_BUS_FMT_UYVY12_1X24: | |
| input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36; | |
| break; | |
| /* 16bit */ | |
| case MEDIA_BUS_FMT_RGB161616_1X48: | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48; | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48; | |
| break; | |
| case MEDIA_BUS_FMT_YUV16_1X48: | |
| input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48; | |
| input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48; | |
| break; | |
| /*YUV 4:2:0 */ | |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: | |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: | |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: | |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: | |
| input_fmts[i++] = output_fmt; | |
| break; | |
| } | |
| *num_input_fmts = i; | |
| if (*num_input_fmts == 0) { | |
| kfree(input_fmts); | |
| input_fmts = NULL; | |
| } | |
| return input_fmts; | |
| } | |
| static int dw_hdmi_bridge_atomic_check(struct drm_bridge *bridge, | |
| struct drm_bridge_state *bridge_state, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| hdmi->hdmi_data.enc_out_bus_format = | |
| bridge_state->output_bus_cfg.format; | |
| hdmi->hdmi_data.enc_in_bus_format = | |
| bridge_state->input_bus_cfg.format; | |
| dev_dbg(hdmi->dev, "input format 0x%04x, output format 0x%04x\n", | |
| bridge_state->input_bus_cfg.format, | |
| bridge_state->output_bus_cfg.format); | |
| return 0; | |
| } | |
| static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, | |
| struct drm_encoder *encoder, | |
| enum drm_bridge_attach_flags flags) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| /* DRM_BRIDGE_ATTACH_NO_CONNECTOR requires a remote-endpoint to the next bridge */ | |
| if (WARN_ON((flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) && !hdmi->plat_data->output_port)) | |
| return -EINVAL; | |
| if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { | |
| struct device_node *remote __free(device_node) = | |
| of_graph_get_remote_node(hdmi->dev->of_node, | |
| hdmi->plat_data->output_port, -1); | |
| if (!remote) | |
| return -ENODEV; | |
| struct drm_bridge *next_bridge __free(drm_bridge_put) = | |
| of_drm_find_and_get_bridge(remote); | |
| if (!next_bridge) | |
| return -EPROBE_DEFER; | |
| return drm_bridge_attach(encoder, next_bridge, bridge, flags); | |
| } | |
| return dw_hdmi_connector_create(hdmi); | |
| } | |
| static void dw_hdmi_bridge_detach(struct drm_bridge *bridge) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| mutex_lock(&hdmi->cec_notifier_mutex); | |
| cec_notifier_conn_unregister(hdmi->cec_notifier); | |
| hdmi->cec_notifier = NULL; | |
| mutex_unlock(&hdmi->cec_notifier_mutex); | |
| } | |
| static enum drm_mode_status | |
| dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge, | |
| const struct drm_display_info *info, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| const struct dw_hdmi_plat_data *pdata = hdmi->plat_data; | |
| enum drm_mode_status mode_status = MODE_OK; | |
| /* We don't support double-clocked modes */ | |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) | |
| return MODE_BAD; | |
| if (pdata->mode_valid) | |
| mode_status = pdata->mode_valid(hdmi, pdata->priv_data, info, | |
| mode); | |
| return mode_status; | |
| } | |
| static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge, | |
| const struct drm_display_mode *orig_mode, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| mutex_lock(&hdmi->mutex); | |
| /* Store the display mode for plugin/DKMS poweron events */ | |
| drm_mode_copy(&hdmi->previous_mode, mode); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->disabled = true; | |
| hdmi->curr_conn = NULL; | |
| dw_hdmi_update_power(hdmi); | |
| dw_hdmi_update_phy_mask(hdmi); | |
| handle_plugged_change(hdmi, false); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| struct drm_connector *connector; | |
| connector = drm_atomic_get_new_connector_for_encoder(state, | |
| bridge->encoder); | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->disabled = false; | |
| hdmi->curr_conn = connector; | |
| dw_hdmi_update_power(hdmi); | |
| dw_hdmi_update_phy_mask(hdmi); | |
| handle_plugged_change(hdmi, true); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static enum drm_connector_status | |
| dw_hdmi_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| return dw_hdmi_detect(hdmi); | |
| } | |
| static const struct drm_edid *dw_hdmi_bridge_edid_read(struct drm_bridge *bridge, | |
| struct drm_connector *connector) | |
| { | |
| struct dw_hdmi *hdmi = bridge->driver_private; | |
| return dw_hdmi_edid_read(hdmi, connector); | |
| } | |
| static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = { | |
| .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, | |
| .atomic_create_state = drm_atomic_helper_bridge_create_state, | |
| .attach = dw_hdmi_bridge_attach, | |
| .detach = dw_hdmi_bridge_detach, | |
| .atomic_check = dw_hdmi_bridge_atomic_check, | |
| .atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts, | |
| .atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts, | |
| .atomic_enable = dw_hdmi_bridge_atomic_enable, | |
| .atomic_disable = dw_hdmi_bridge_atomic_disable, | |
| .mode_set = dw_hdmi_bridge_mode_set, | |
| .mode_valid = dw_hdmi_bridge_mode_valid, | |
| .detect = dw_hdmi_bridge_detect, | |
| .edid_read = dw_hdmi_bridge_edid_read, | |
| }; | |
| /* ----------------------------------------------------------------------------- | |
| * IRQ Handling | |
| */ | |
| static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi) | |
| { | |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; | |
| unsigned int stat; | |
| stat = hdmi_readb(hdmi, HDMI_IH_I2CM_STAT0); | |
| if (!stat) | |
| return IRQ_NONE; | |
| hdmi_writeb(hdmi, stat, HDMI_IH_I2CM_STAT0); | |
| i2c->stat = stat; | |
| complete(&i2c->cmp); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id) | |
| { | |
| struct dw_hdmi *hdmi = dev_id; | |
| u8 intr_stat; | |
| irqreturn_t ret = IRQ_NONE; | |
| if (hdmi->i2c) | |
| ret = dw_hdmi_i2c_irq(hdmi); | |
| intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0); | |
| if (intr_stat) { | |
| hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); | |
| return IRQ_WAKE_THREAD; | |
| } | |
| return ret; | |
| } | |
| void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense) | |
| { | |
| mutex_lock(&hdmi->mutex); | |
| if (!hdmi->force) { | |
| /* | |
| * If the RX sense status indicates we're disconnected, | |
| * clear the software rxsense status. | |
| */ | |
| if (!rx_sense) | |
| hdmi->rxsense = false; | |
| /* | |
| * Only set the software rxsense status when both | |
| * rxsense and hpd indicates we're connected. | |
| * This avoids what seems to be bad behaviour in | |
| * at least iMX6S versions of the phy. | |
| */ | |
| if (hpd) | |
| hdmi->rxsense = true; | |
| dw_hdmi_update_power(hdmi); | |
| dw_hdmi_update_phy_mask(hdmi); | |
| } | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense); | |
| static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) | |
| { | |
| struct dw_hdmi *hdmi = dev_id; | |
| u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat; | |
| enum drm_connector_status status = connector_status_unknown; | |
| intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0); | |
| phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0); | |
| phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0); | |
| phy_pol_mask = 0; | |
| if (intr_stat & HDMI_IH_PHY_STAT0_HPD) | |
| phy_pol_mask |= HDMI_PHY_HPD; | |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0) | |
| phy_pol_mask |= HDMI_PHY_RX_SENSE0; | |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1) | |
| phy_pol_mask |= HDMI_PHY_RX_SENSE1; | |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2) | |
| phy_pol_mask |= HDMI_PHY_RX_SENSE2; | |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3) | |
| phy_pol_mask |= HDMI_PHY_RX_SENSE3; | |
| if (phy_pol_mask) | |
| hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0); | |
| /* | |
| * RX sense tells us whether the TDMS transmitters are detecting | |
| * load - in other words, there's something listening on the | |
| * other end of the link. Use this to decide whether we should | |
| * power on the phy as HPD may be toggled by the sink to merely | |
| * ask the source to re-read the EDID. | |
| */ | |
| if (intr_stat & | |
| (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) { | |
| dw_hdmi_setup_rx_sense(hdmi, | |
| phy_stat & HDMI_PHY_HPD, | |
| phy_stat & HDMI_PHY_RX_SENSE); | |
| if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) { | |
| mutex_lock(&hdmi->cec_notifier_mutex); | |
| cec_notifier_phys_addr_invalidate(hdmi->cec_notifier); | |
| mutex_unlock(&hdmi->cec_notifier_mutex); | |
| } | |
| if (phy_stat & HDMI_PHY_HPD) | |
| status = connector_status_connected; | |
| if (!(phy_stat & (HDMI_PHY_HPD | HDMI_PHY_RX_SENSE))) | |
| status = connector_status_disconnected; | |
| } | |
| if (status != connector_status_unknown) { | |
| dev_dbg(hdmi->dev, "EVENT=%s\n", | |
| status == connector_status_connected ? | |
| "plugin" : "plugout"); | |
| if (hdmi->bridge.dev) { | |
| drm_helper_hpd_irq_event(hdmi->bridge.dev); | |
| drm_bridge_hpd_notify(&hdmi->bridge, status); | |
| } | |
| } | |
| hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0); | |
| hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), | |
| HDMI_IH_MUTE_PHY_STAT0); | |
| return IRQ_HANDLED; | |
| } | |
| static const struct dw_hdmi_phy_data dw_hdmi_phys[] = { | |
| { | |
| .type = DW_HDMI_PHY_DWC_HDMI_TX_PHY, | |
| .name = "DWC HDMI TX PHY", | |
| .gen = 1, | |
| }, { | |
| .type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC, | |
| .name = "DWC MHL PHY + HEAC PHY", | |
| .gen = 2, | |
| .has_svsret = true, | |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, | |
| }, { | |
| .type = DW_HDMI_PHY_DWC_MHL_PHY, | |
| .name = "DWC MHL PHY", | |
| .gen = 2, | |
| .has_svsret = true, | |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, | |
| }, { | |
| .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC, | |
| .name = "DWC HDMI 3D TX PHY + HEAC PHY", | |
| .gen = 2, | |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, | |
| }, { | |
| .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY, | |
| .name = "DWC HDMI 3D TX PHY", | |
| .gen = 2, | |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, | |
| }, { | |
| .type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY, | |
| .name = "DWC HDMI 2.0 TX PHY", | |
| .gen = 2, | |
| .has_svsret = true, | |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, | |
| }, { | |
| .type = DW_HDMI_PHY_VENDOR_PHY, | |
| .name = "Vendor PHY", | |
| } | |
| }; | |
| static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi) | |
| { | |
| unsigned int i; | |
| u8 phy_type; | |
| phy_type = hdmi->plat_data->phy_force_vendor ? | |
| DW_HDMI_PHY_VENDOR_PHY : | |
| hdmi_readb(hdmi, HDMI_CONFIG2_ID); | |
| if (phy_type == DW_HDMI_PHY_VENDOR_PHY) { | |
| /* Vendor PHYs require support from the glue layer. */ | |
| if (!hdmi->plat_data->phy_ops || !hdmi->plat_data->phy_name) { | |
| dev_err(hdmi->dev, | |
| "Vendor HDMI PHY not supported by glue layer\n"); | |
| return -ENODEV; | |
| } | |
| hdmi->phy.ops = hdmi->plat_data->phy_ops; | |
| hdmi->phy.data = hdmi->plat_data->phy_data; | |
| hdmi->phy.name = hdmi->plat_data->phy_name; | |
| return 0; | |
| } | |
| /* Synopsys PHYs are handled internally. */ | |
| for (i = 0; i < ARRAY_SIZE(dw_hdmi_phys); ++i) { | |
| if (dw_hdmi_phys[i].type == phy_type) { | |
| hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops; | |
| hdmi->phy.name = dw_hdmi_phys[i].name; | |
| hdmi->phy.data = (void *)&dw_hdmi_phys[i]; | |
| if (!dw_hdmi_phys[i].configure && | |
| !hdmi->plat_data->configure_phy) { | |
| dev_err(hdmi->dev, "%s requires platform support\n", | |
| hdmi->phy.name); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| } | |
| dev_err(hdmi->dev, "Unsupported HDMI PHY type (%02x)\n", phy_type); | |
| return -ENODEV; | |
| } | |
| static void dw_hdmi_cec_enable(struct dw_hdmi *hdmi) | |
| { | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CECCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static void dw_hdmi_cec_disable(struct dw_hdmi *hdmi) | |
| { | |
| mutex_lock(&hdmi->mutex); | |
| hdmi->mc_clkdis |= HDMI_MC_CLKDIS_CECCLK_DISABLE; | |
| hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS); | |
| mutex_unlock(&hdmi->mutex); | |
| } | |
| static const struct dw_hdmi_cec_ops dw_hdmi_cec_ops = { | |
| .write = hdmi_writeb, | |
| .read = hdmi_readb, | |
| .enable = dw_hdmi_cec_enable, | |
| .disable = dw_hdmi_cec_disable, | |
| }; | |
| static const struct regmap_config hdmi_regmap_8bit_config = { | |
| .reg_bits = 32, | |
| .val_bits = 8, | |
| .reg_stride = 1, | |
| .max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR, | |
| }; | |
| static const struct regmap_config hdmi_regmap_32bit_config = { | |
| .reg_bits = 32, | |
| .val_bits = 32, | |
| .reg_stride = 4, | |
| .max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2, | |
| }; | |
| static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) | |
| { | |
| initialize_hdmi_ih_mutes(hdmi); | |
| /* | |
| * Reset HDMI DDC I2C master controller and mute I2CM interrupts. | |
| * Even if we are using a separate i2c adapter doing this doesn't | |
| * hurt. | |
| */ | |
| dw_hdmi_i2c_init(hdmi); | |
| if (hdmi->phy.ops->setup_hpd) | |
| hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * Probe/remove API, used from platforms based on the DRM bridge API. | |
| */ | |
| bool dw_hdmi_bus_fmt_is_420(struct dw_hdmi *hdmi) | |
| { | |
| return hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_bus_fmt_is_420); | |
| struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev, | |
| const struct dw_hdmi_plat_data *plat_data) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct platform_device_info pdevinfo; | |
| struct device_node *ddc_node; | |
| struct dw_hdmi_cec_data cec; | |
| struct dw_hdmi *hdmi; | |
| struct clk *clk; | |
| struct resource *iores = NULL; | |
| int irq; | |
| int ret; | |
| u32 val = 1; | |
| u8 prod_id0; | |
| u8 prod_id1; | |
| u8 config0; | |
| u8 config3; | |
| hdmi = devm_drm_bridge_alloc(dev, struct dw_hdmi, bridge, &dw_hdmi_bridge_funcs); | |
| if (IS_ERR(hdmi)) | |
| return hdmi; | |
| hdmi->plat_data = plat_data; | |
| hdmi->dev = dev; | |
| hdmi->sample_rate = 48000; | |
| hdmi->channels = 2; | |
| hdmi->disabled = true; | |
| hdmi->rxsense = true; | |
| hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE); | |
| hdmi->mc_clkdis = 0x7f; | |
| hdmi->last_connector_result = connector_status_disconnected; | |
| mutex_init(&hdmi->mutex); | |
| mutex_init(&hdmi->audio_mutex); | |
| mutex_init(&hdmi->cec_notifier_mutex); | |
| spin_lock_init(&hdmi->audio_lock); | |
| ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); | |
| if (ddc_node) { | |
| hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); | |
| of_node_put(ddc_node); | |
| if (!hdmi->ddc) { | |
| dev_dbg(hdmi->dev, "failed to read ddc node\n"); | |
| return ERR_PTR(-EPROBE_DEFER); | |
| } | |
| } else { | |
| dev_dbg(hdmi->dev, "no ddc property found\n"); | |
| } | |
| if (!plat_data->regm) { | |
| const struct regmap_config *reg_config; | |
| of_property_read_u32(np, "reg-io-width", &val); | |
| switch (val) { | |
| case 4: | |
| reg_config = &hdmi_regmap_32bit_config; | |
| hdmi->reg_shift = 2; | |
| break; | |
| case 1: | |
| reg_config = &hdmi_regmap_8bit_config; | |
| break; | |
| default: | |
| dev_err(dev, "reg-io-width must be 1 or 4\n"); | |
| ret = -EINVAL; | |
| goto err_res; | |
| } | |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| hdmi->regs = devm_ioremap_resource(dev, iores); | |
| if (IS_ERR(hdmi->regs)) { | |
| ret = PTR_ERR(hdmi->regs); | |
| goto err_res; | |
| } | |
| hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config); | |
| if (IS_ERR(hdmi->regm)) { | |
| dev_err(dev, "Failed to configure regmap\n"); | |
| ret = PTR_ERR(hdmi->regm); | |
| goto err_res; | |
| } | |
| } else { | |
| hdmi->regm = plat_data->regm; | |
| } | |
| clk = devm_clk_get_enabled(hdmi->dev, "isfr"); | |
| if (IS_ERR(clk)) { | |
| ret = PTR_ERR(clk); | |
| dev_err(hdmi->dev, "Unable to get HDMI isfr clk: %d\n", ret); | |
| goto err_res; | |
| } | |
| clk = devm_clk_get_enabled(hdmi->dev, "iahb"); | |
| if (IS_ERR(clk)) { | |
| ret = PTR_ERR(clk); | |
| dev_err(hdmi->dev, "Unable to get HDMI iahb clk: %d\n", ret); | |
| goto err_res; | |
| } | |
| clk = devm_clk_get_optional_enabled(hdmi->dev, "cec"); | |
| if (IS_ERR(clk)) { | |
| ret = PTR_ERR(clk); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(hdmi->dev, "Cannot get HDMI cec clock: %d\n", | |
| ret); | |
| goto err_res; | |
| } | |
| /* Product and revision IDs */ | |
| hdmi->version = (hdmi_readb(hdmi, HDMI_DESIGN_ID) << 8) | |
| | (hdmi_readb(hdmi, HDMI_REVISION_ID) << 0); | |
| prod_id0 = hdmi_readb(hdmi, HDMI_PRODUCT_ID0); | |
| prod_id1 = hdmi_readb(hdmi, HDMI_PRODUCT_ID1); | |
| if (prod_id0 != HDMI_PRODUCT_ID0_HDMI_TX || | |
| (prod_id1 & ~HDMI_PRODUCT_ID1_HDCP) != HDMI_PRODUCT_ID1_HDMI_TX) { | |
| dev_err(dev, "Unsupported HDMI controller (%04x:%02x:%02x)\n", | |
| hdmi->version, prod_id0, prod_id1); | |
| ret = -ENODEV; | |
| goto err_res; | |
| } | |
| ret = dw_hdmi_detect_phy(hdmi); | |
| if (ret < 0) | |
| goto err_res; | |
| dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP (%s)\n", | |
| hdmi->version >> 12, hdmi->version & 0xfff, | |
| prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without", | |
| hdmi->phy.name); | |
| dw_hdmi_init_hw(hdmi); | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| ret = irq; | |
| goto err_res; | |
| } | |
| ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq, | |
| dw_hdmi_irq, IRQF_SHARED, | |
| dev_name(dev), hdmi); | |
| if (ret) | |
| goto err_res; | |
| /* | |
| * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator | |
| * N and cts values before enabling phy | |
| */ | |
| hdmi_init_clk_regenerator(hdmi); | |
| /* If DDC bus is not specified, try to register HDMI I2C bus */ | |
| if (!hdmi->ddc) { | |
| /* Look for (optional) stuff related to unwedging */ | |
| hdmi->pinctrl = devm_pinctrl_get(dev); | |
| if (!IS_ERR(hdmi->pinctrl)) { | |
| hdmi->unwedge_state = | |
| pinctrl_lookup_state(hdmi->pinctrl, "unwedge"); | |
| hdmi->default_state = | |
| pinctrl_lookup_state(hdmi->pinctrl, "default"); | |
| if (IS_ERR(hdmi->default_state) || | |
| IS_ERR(hdmi->unwedge_state)) { | |
| if (!IS_ERR(hdmi->unwedge_state)) | |
| dev_warn(dev, | |
| "Unwedge requires default pinctrl\n"); | |
| hdmi->default_state = NULL; | |
| hdmi->unwedge_state = NULL; | |
| } | |
| } | |
| hdmi->ddc = dw_hdmi_i2c_adapter(hdmi); | |
| if (IS_ERR(hdmi->ddc)) | |
| hdmi->ddc = NULL; | |
| } | |
| hdmi->bridge.driver_private = hdmi; | |
| hdmi->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | |
| | DRM_BRIDGE_OP_HPD; | |
| hdmi->bridge.interlace_allowed = true; | |
| hdmi->bridge.ddc = hdmi->ddc; | |
| hdmi->bridge.of_node = pdev->dev.of_node; | |
| hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA; | |
| if (hdmi->version >= 0x200a) | |
| hdmi->bridge.ycbcr_420_allowed = plat_data->ycbcr_420_allowed; | |
| memset(&pdevinfo, 0, sizeof(pdevinfo)); | |
| pdevinfo.parent = dev; | |
| pdevinfo.id = PLATFORM_DEVID_AUTO; | |
| config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID); | |
| config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID); | |
| if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) { | |
| struct dw_hdmi_audio_data audio; | |
| audio.phys = iores->start; | |
| audio.base = hdmi->regs; | |
| audio.irq = irq; | |
| audio.hdmi = hdmi; | |
| audio.get_eld = hdmi_audio_get_eld; | |
| hdmi->enable_audio = dw_hdmi_ahb_audio_enable; | |
| hdmi->disable_audio = dw_hdmi_ahb_audio_disable; | |
| pdevinfo.name = "dw-hdmi-ahb-audio"; | |
| pdevinfo.data = &audio; | |
| pdevinfo.size_data = sizeof(audio); | |
| pdevinfo.dma_mask = DMA_BIT_MASK(32); | |
| hdmi->audio = platform_device_register_full(&pdevinfo); | |
| } else if (config0 & HDMI_CONFIG0_I2S) { | |
| struct dw_hdmi_i2s_audio_data audio; | |
| audio.hdmi = hdmi; | |
| audio.get_eld = hdmi_audio_get_eld; | |
| audio.write = hdmi_writeb; | |
| audio.read = hdmi_readb; | |
| hdmi->enable_audio = dw_hdmi_i2s_audio_enable; | |
| hdmi->disable_audio = dw_hdmi_i2s_audio_disable; | |
| pdevinfo.name = "dw-hdmi-i2s-audio"; | |
| pdevinfo.data = &audio; | |
| pdevinfo.size_data = sizeof(audio); | |
| pdevinfo.dma_mask = DMA_BIT_MASK(32); | |
| hdmi->audio = platform_device_register_full(&pdevinfo); | |
| } else if (iores && config3 & HDMI_CONFIG3_GPAUD) { | |
| struct dw_hdmi_audio_data audio; | |
| audio.phys = iores->start; | |
| audio.base = hdmi->regs; | |
| audio.irq = irq; | |
| audio.hdmi = hdmi; | |
| audio.get_eld = hdmi_audio_get_eld; | |
| hdmi->enable_audio = dw_hdmi_gp_audio_enable; | |
| hdmi->disable_audio = dw_hdmi_gp_audio_disable; | |
| pdevinfo.name = "dw-hdmi-gp-audio"; | |
| pdevinfo.id = PLATFORM_DEVID_NONE; | |
| pdevinfo.data = &audio; | |
| pdevinfo.size_data = sizeof(audio); | |
| pdevinfo.dma_mask = DMA_BIT_MASK(32); | |
| hdmi->audio = platform_device_register_full(&pdevinfo); | |
| } | |
| if (!plat_data->disable_cec && (config0 & HDMI_CONFIG0_CEC)) { | |
| cec.hdmi = hdmi; | |
| cec.ops = &dw_hdmi_cec_ops; | |
| cec.irq = irq; | |
| pdevinfo.name = "dw-hdmi-cec"; | |
| pdevinfo.data = &cec; | |
| pdevinfo.size_data = sizeof(cec); | |
| pdevinfo.dma_mask = 0; | |
| hdmi->cec = platform_device_register_full(&pdevinfo); | |
| } | |
| drm_bridge_add(&hdmi->bridge); | |
| return hdmi; | |
| err_res: | |
| i2c_put_adapter(hdmi->ddc); | |
| return ERR_PTR(ret); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_probe); | |
| void dw_hdmi_remove(struct dw_hdmi *hdmi) | |
| { | |
| drm_bridge_remove(&hdmi->bridge); | |
| if (hdmi->audio && !IS_ERR(hdmi->audio)) | |
| platform_device_unregister(hdmi->audio); | |
| if (!IS_ERR(hdmi->cec)) | |
| platform_device_unregister(hdmi->cec); | |
| /* Disable all interrupts */ | |
| hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); | |
| if (hdmi->i2c) | |
| i2c_del_adapter(&hdmi->i2c->adap); | |
| else | |
| i2c_put_adapter(hdmi->ddc); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_remove); | |
| /* ----------------------------------------------------------------------------- | |
| * Bind/unbind API, used from platforms based on the component framework. | |
| */ | |
| struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev, | |
| struct drm_encoder *encoder, | |
| const struct dw_hdmi_plat_data *plat_data) | |
| { | |
| struct dw_hdmi *hdmi; | |
| int ret; | |
| hdmi = dw_hdmi_probe(pdev, plat_data); | |
| if (IS_ERR(hdmi)) | |
| return hdmi; | |
| ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL, 0); | |
| if (ret) { | |
| dw_hdmi_remove(hdmi); | |
| return ERR_PTR(ret); | |
| } | |
| return hdmi; | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_bind); | |
| void dw_hdmi_unbind(struct dw_hdmi *hdmi) | |
| { | |
| dw_hdmi_remove(hdmi); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_unbind); | |
| void dw_hdmi_resume(struct dw_hdmi *hdmi) | |
| { | |
| dw_hdmi_init_hw(hdmi); | |
| } | |
| EXPORT_SYMBOL_GPL(dw_hdmi_resume); | |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); | |
| MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>"); | |
| MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>"); | |
| MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>"); | |
| MODULE_DESCRIPTION("DW HDMI transmitter driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:dw-hdmi"); |