Google Git Google Git
Sign in
zircon-guest/third_party/linux/refs/heads/linux-7.3.y/./drivers/gpu/drm/bridge/sii902x.c
blob: 9aac44ed5b677d3a5204e57d91e49441cf0e9c64 [file] [edit]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2018 Renesas Electronics
*
* Copyright (C) 2016 Atmel
* Bo Shen <voice.shen@atmel.com>
*
* Authors: Bo Shen <voice.shen@atmel.com>
* Boris Brezillon <boris.brezillon@free-electrons.com>
* Wu, Songjun <Songjun.Wu@atmel.com>
*
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/gpio/consumer.h>
#include <linux/i2c-mux.h>
#include <linux/i2c.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/clk.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_drv.h>
#include <drm/drm_edid.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
#include <sound/hdmi-codec.h>
#define SII902X_TPI_VIDEO_DATA 0x0
#define SII902X_TPI_PIXEL_REPETITION 0x8
#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5)
#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4)
#define SII902X_TPI_AVI_PIXEL_REP_4X 3
#define SII902X_TPI_AVI_PIXEL_REP_2X 1
#define SII902X_TPI_AVI_PIXEL_REP_NONE 0
#define SII902X_TPI_CLK_RATIO_HALF (0 << 6)
#define SII902X_TPI_CLK_RATIO_1X (1 << 6)
#define SII902X_TPI_CLK_RATIO_2X (2 << 6)
#define SII902X_TPI_CLK_RATIO_4X (3 << 6)
#define SII902X_TPI_AVI_IN_FORMAT 0x9
#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7)
#define SII902X_TPI_AVI_INPUT_DITHER BIT(6)
#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2)
#define SII902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2)
#define SII902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2)
#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0)
#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0)
#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0)
#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0)
#define SII902X_TPI_AVI_INFOFRAME 0x0c
#define SII902X_SYS_CTRL_DATA 0x1a
#define SII902X_SYS_CTRL_PWR_DWN BIT(4)
#define SII902X_SYS_CTRL_AV_MUTE BIT(3)
#define SII902X_SYS_CTRL_DDC_BUS_REQ BIT(2)
#define SII902X_SYS_CTRL_DDC_BUS_GRTD BIT(1)
#define SII902X_SYS_CTRL_OUTPUT_MODE BIT(0)
#define SII902X_SYS_CTRL_OUTPUT_HDMI 1
#define SII902X_SYS_CTRL_OUTPUT_DVI 0
#define SII902X_REG_CHIPID(n) (0x1b + (n))
#define SII902X_PWR_STATE_CTRL 0x1e
#define SII902X_AVI_POWER_STATE_MSK GENMASK(1, 0)
#define SII902X_AVI_POWER_STATE_D(l) ((l) & SII902X_AVI_POWER_STATE_MSK)
/* Audio */
#define SII902X_TPI_I2S_ENABLE_MAPPING_REG 0x1f
#define SII902X_TPI_I2S_CONFIG_FIFO0 (0 << 0)
#define SII902X_TPI_I2S_CONFIG_FIFO1 (1 << 0)
#define SII902X_TPI_I2S_CONFIG_FIFO2 (2 << 0)
#define SII902X_TPI_I2S_CONFIG_FIFO3 (3 << 0)
#define SII902X_TPI_I2S_LEFT_RIGHT_SWAP (1 << 2)
#define SII902X_TPI_I2S_AUTO_DOWNSAMPLE (1 << 3)
#define SII902X_TPI_I2S_SELECT_SD0 (0 << 4)
#define SII902X_TPI_I2S_SELECT_SD1 (1 << 4)
#define SII902X_TPI_I2S_SELECT_SD2 (2 << 4)
#define SII902X_TPI_I2S_SELECT_SD3 (3 << 4)
#define SII902X_TPI_I2S_FIFO_ENABLE (1 << 7)
#define SII902X_TPI_I2S_INPUT_CONFIG_REG 0x20
#define SII902X_TPI_I2S_FIRST_BIT_SHIFT_YES (0 << 0)
#define SII902X_TPI_I2S_FIRST_BIT_SHIFT_NO (1 << 0)
#define SII902X_TPI_I2S_SD_DIRECTION_MSB_FIRST (0 << 1)
#define SII902X_TPI_I2S_SD_DIRECTION_LSB_FIRST (1 << 1)
#define SII902X_TPI_I2S_SD_JUSTIFY_LEFT (0 << 2)
#define SII902X_TPI_I2S_SD_JUSTIFY_RIGHT (1 << 2)
#define SII902X_TPI_I2S_WS_POLARITY_LOW (0 << 3)
#define SII902X_TPI_I2S_WS_POLARITY_HIGH (1 << 3)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_128 (0 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_256 (1 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_384 (2 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_512 (3 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_768 (4 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_1024 (5 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_1152 (6 << 4)
#define SII902X_TPI_I2S_MCLK_MULTIPLIER_192 (7 << 4)
#define SII902X_TPI_I2S_SCK_EDGE_FALLING (0 << 7)
#define SII902X_TPI_I2S_SCK_EDGE_RISING (1 << 7)
#define SII902X_TPI_I2S_STRM_HDR_BASE 0x21
#define SII902X_TPI_I2S_STRM_HDR_SIZE 5
#define SII902X_TPI_AUDIO_CONFIG_BYTE2_REG 0x26
#define SII902X_TPI_AUDIO_CODING_STREAM_HEADER (0 << 0)
#define SII902X_TPI_AUDIO_CODING_PCM (1 << 0)
#define SII902X_TPI_AUDIO_CODING_AC3 (2 << 0)
#define SII902X_TPI_AUDIO_CODING_MPEG1 (3 << 0)
#define SII902X_TPI_AUDIO_CODING_MP3 (4 << 0)
#define SII902X_TPI_AUDIO_CODING_MPEG2 (5 << 0)
#define SII902X_TPI_AUDIO_CODING_AAC (6 << 0)
#define SII902X_TPI_AUDIO_CODING_DTS (7 << 0)
#define SII902X_TPI_AUDIO_CODING_ATRAC (8 << 0)
#define SII902X_TPI_AUDIO_MUTE_DISABLE (0 << 4)
#define SII902X_TPI_AUDIO_MUTE_ENABLE (1 << 4)
#define SII902X_TPI_AUDIO_LAYOUT_2_CHANNELS (0 << 5)
#define SII902X_TPI_AUDIO_LAYOUT_8_CHANNELS (1 << 5)
#define SII902X_TPI_AUDIO_INTERFACE_DISABLE (0 << 6)
#define SII902X_TPI_AUDIO_INTERFACE_SPDIF (1 << 6)
#define SII902X_TPI_AUDIO_INTERFACE_I2S (2 << 6)
#define SII902X_TPI_AUDIO_CONFIG_BYTE3_REG 0x27
#define SII902X_TPI_AUDIO_FREQ_STREAM (0 << 3)
#define SII902X_TPI_AUDIO_FREQ_32KHZ (1 << 3)
#define SII902X_TPI_AUDIO_FREQ_44KHZ (2 << 3)
#define SII902X_TPI_AUDIO_FREQ_48KHZ (3 << 3)
#define SII902X_TPI_AUDIO_FREQ_88KHZ (4 << 3)
#define SII902X_TPI_AUDIO_FREQ_96KHZ (5 << 3)
#define SII902X_TPI_AUDIO_FREQ_176KHZ (6 << 3)
#define SII902X_TPI_AUDIO_FREQ_192KHZ (7 << 3)
#define SII902X_TPI_AUDIO_SAMPLE_SIZE_STREAM (0 << 6)
#define SII902X_TPI_AUDIO_SAMPLE_SIZE_16 (1 << 6)
#define SII902X_TPI_AUDIO_SAMPLE_SIZE_20 (2 << 6)
#define SII902X_TPI_AUDIO_SAMPLE_SIZE_24 (3 << 6)
#define SII902X_TPI_AUDIO_CONFIG_BYTE4_REG 0x28
#define SII902X_INT_ENABLE 0x3c
#define SII902X_INT_STATUS 0x3d
#define SII902X_HOTPLUG_EVENT BIT(0)
#define SII902X_PLUGGED_STATUS BIT(2)
#define SII902X_REG_TPI_RQB 0xc7
/* Indirect internal register access */
#define SII902X_IND_SET_PAGE 0xbc
#define SII902X_IND_OFFSET 0xbd
#define SII902X_IND_VALUE 0xbe
#define SII902X_TPI_MISC_INFOFRAME_BASE 0xbf
#define SII902X_TPI_MISC_INFOFRAME_END 0xde
#define SII902X_TPI_MISC_INFOFRAME_SIZE \
(SII902X_TPI_MISC_INFOFRAME_END - SII902X_TPI_MISC_INFOFRAME_BASE)
#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS 500
#define SII902X_AUDIO_PORT_INDEX 3
/*
* The maximum resolution supported by the HDMI bridge is 1080p@60Hz
* and 1920x1200 requiring a pixel clock of 165MHz and the minimum
* resolution supported is 480p@60Hz requiring a pixel clock of 25MHz
*/
#define SII902X_MIN_PIXEL_CLOCK_KHZ 25000
#define SII902X_MAX_PIXEL_CLOCK_KHZ 165000
struct sii902x {
struct i2c_client *i2c;
struct regmap *regmap;
struct drm_bridge bridge;
struct drm_connector connector;
struct gpio_desc *reset_gpio;
struct i2c_mux_core *i2cmux;
u32 bus_width;
/*
* Mutex protects audio and video functions from interfering
* each other, by keeping their i2c command sequences atomic.
*/
struct mutex mutex;
struct sii902x_audio {
struct platform_device *pdev;
struct clk *mclk;
u32 i2s_fifo_sequence[4];
} audio;
};
static int sii902x_read_unlocked(struct i2c_client *i2c, u8 reg, u8 *val)
{
union i2c_smbus_data data;
int ret;
ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
I2C_SMBUS_READ, reg, I2C_SMBUS_BYTE_DATA, &data);
if (ret < 0)
return ret;
*val = data.byte;
return 0;
}
static int sii902x_write_unlocked(struct i2c_client *i2c, u8 reg, u8 val)
{
union i2c_smbus_data data;
data.byte = val;
return __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
I2C_SMBUS_WRITE, reg, I2C_SMBUS_BYTE_DATA,
&data);
}
static int sii902x_update_bits_unlocked(struct i2c_client *i2c, u8 reg, u8 mask,
u8 val)
{
int ret;
u8 status;
ret = sii902x_read_unlocked(i2c, reg, &status);
if (ret)
return ret;
status &= ~mask;
status |= val & mask;
return sii902x_write_unlocked(i2c, reg, status);
}
static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
{
return container_of(bridge, struct sii902x, bridge);
}
static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
{
return container_of(con, struct sii902x, connector);
}
static void sii902x_reset(struct sii902x *sii902x)
{
if (!sii902x->reset_gpio)
return;
gpiod_set_value_cansleep(sii902x->reset_gpio, 1);
/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
usleep_range(150, 200);
gpiod_set_value_cansleep(sii902x->reset_gpio, 0);
}
static enum drm_connector_status sii902x_detect(struct sii902x *sii902x)
{
unsigned int status;
mutex_lock(&sii902x->mutex);
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
mutex_unlock(&sii902x->mutex);
return (status & SII902X_PLUGGED_STATUS) ?
connector_status_connected : connector_status_disconnected;
}
static enum drm_connector_status
sii902x_connector_detect(struct drm_connector *connector, bool force)
{
struct sii902x *sii902x = connector_to_sii902x(connector);
return sii902x_detect(sii902x);
}
static const struct drm_connector_funcs sii902x_connector_funcs = {
.detect = sii902x_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_edid *sii902x_edid_read(struct sii902x *sii902x,
struct drm_connector *connector)
{
const struct drm_edid *drm_edid;
mutex_lock(&sii902x->mutex);
drm_edid = drm_edid_read_ddc(connector, sii902x->i2cmux->adapter[0]);
mutex_unlock(&sii902x->mutex);
return drm_edid;
}
static int sii902x_get_modes(struct drm_connector *connector)
{
struct sii902x *sii902x = connector_to_sii902x(connector);
const struct drm_edid *drm_edid;
int num = 0;
drm_edid = sii902x_edid_read(sii902x, connector);
drm_edid_connector_update(connector, drm_edid);
if (drm_edid) {
num = drm_edid_connector_add_modes(connector);
drm_edid_free(drm_edid);
}
return num;
}
static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
.get_modes = sii902x_get_modes,
};
static void sii902x_bridge_atomic_disable(struct drm_bridge *bridge,
struct drm_atomic_commit *state)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
mutex_lock(&sii902x->mutex);
regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
SII902X_SYS_CTRL_PWR_DWN,
SII902X_SYS_CTRL_PWR_DWN);
mutex_unlock(&sii902x->mutex);
}
static void sii902x_bridge_atomic_enable(struct drm_bridge *bridge,
struct drm_atomic_commit *state)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
struct drm_connector *connector;
u8 output_mode = SII902X_SYS_CTRL_OUTPUT_DVI;
connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
if (connector && connector->display_info.is_hdmi)
output_mode = SII902X_SYS_CTRL_OUTPUT_HDMI;
mutex_lock(&sii902x->mutex);
regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
SII902X_SYS_CTRL_OUTPUT_MODE, output_mode);
regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
SII902X_AVI_POWER_STATE_MSK,
SII902X_AVI_POWER_STATE_D(0));
regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
SII902X_SYS_CTRL_PWR_DWN, 0);
mutex_unlock(&sii902x->mutex);
}
static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adj)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
struct regmap *regmap = sii902x->regmap;
u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
struct hdmi_avi_infoframe frame;
u16 pixel_clock_10kHz = adj->clock / 10;
int ret;
buf[0] = pixel_clock_10kHz & 0xff;
buf[1] = pixel_clock_10kHz >> 8;
buf[2] = drm_mode_vrefresh(adj);
buf[3] = 0x00;
buf[4] = adj->hdisplay;
buf[5] = adj->hdisplay >> 8;
buf[6] = adj->vdisplay;
buf[7] = adj->vdisplay >> 8;
buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
mutex_lock(&sii902x->mutex);
ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
if (ret)
goto out;
ret = drm_hdmi_avi_infoframe_from_display_mode(&frame,
&sii902x->connector, adj);
if (ret < 0) {
DRM_ERROR("couldn't fill AVI infoframe\n");
goto out;
}
ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
if (ret < 0) {
DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
goto out;
}
/* Do not send the infoframe header, but keep the CRC field. */
regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
HDMI_AVI_INFOFRAME_SIZE + 1);
out:
mutex_unlock(&sii902x->mutex);
}
static int sii902x_bridge_attach(struct drm_bridge *bridge,
struct drm_encoder *encoder,
enum drm_bridge_attach_flags flags)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
struct drm_device *drm = bridge->dev;
int ret;
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return drm_bridge_attach(encoder, sii902x->bridge.next_bridge,
bridge, flags);
drm_connector_helper_add(&sii902x->connector,
&sii902x_connector_helper_funcs);
if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
dev_err(&sii902x->i2c->dev,
"sii902x driver is only compatible with DRM devices supporting atomic updates\n");
return -ENOTSUPP;
}
ret = drm_connector_init(drm, &sii902x->connector,
&sii902x_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA);
if (ret)
return ret;
if (sii902x->i2c->irq > 0)
sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
else
sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
ret = drm_display_info_set_bus_formats(&sii902x->connector.display_info,
&bus_format, 1);
if (ret)
return ret;
drm_connector_attach_encoder(&sii902x->connector, encoder);
return 0;
}
static enum drm_connector_status
sii902x_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
return sii902x_detect(sii902x);
}
static const struct drm_edid *sii902x_bridge_edid_read(struct drm_bridge *bridge,
struct drm_connector *connector)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
return sii902x_edid_read(sii902x, connector);
}
static u32 *sii902x_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts)
{
struct sii902x *sii902x = bridge_to_sii902x(bridge);
u32 *input_fmts;
*num_input_fmts = 0;
input_fmts = kcalloc(1, sizeof(*input_fmts), GFP_KERNEL);
if (!input_fmts)
return NULL;
switch (sii902x->bus_width) {
case 16:
input_fmts[0] = MEDIA_BUS_FMT_RGB565_1X16;
break;
case 18:
input_fmts[0] = MEDIA_BUS_FMT_RGB666_1X18;
break;
case 24:
input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
break;
default:
return NULL;
}
*num_input_fmts = 1;
return input_fmts;
}
static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
if (crtc_state->mode.clock < SII902X_MIN_PIXEL_CLOCK_KHZ ||
crtc_state->mode.clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
return -EINVAL;
/*
* There might be flags negotiation supported in future but
* set the bus flags in atomic_check statically for now.
*/
bridge_state->input_bus_cfg.flags = bridge->timings->input_bus_flags;
return 0;
}
static enum drm_mode_status
sii902x_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_info *info,
const struct drm_display_mode *mode)
{
if (mode->clock < SII902X_MIN_PIXEL_CLOCK_KHZ)
return MODE_CLOCK_LOW;
if (mode->clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
static const struct drm_bridge_funcs sii902x_bridge_funcs = {
.attach = sii902x_bridge_attach,
.mode_set = sii902x_bridge_mode_set,
.atomic_disable = sii902x_bridge_atomic_disable,
.atomic_enable = sii902x_bridge_atomic_enable,
.detect = sii902x_bridge_detect,
.edid_read = sii902x_bridge_edid_read,
.atomic_create_state = drm_atomic_helper_bridge_create_state,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_get_input_bus_fmts = sii902x_bridge_atomic_get_input_bus_fmts,
.atomic_check = sii902x_bridge_atomic_check,
.mode_valid = sii902x_bridge_mode_valid,
};
static int sii902x_mute(struct sii902x *sii902x, bool mute)
{
struct device *dev = &sii902x->i2c->dev;
unsigned int val = mute ? SII902X_TPI_AUDIO_MUTE_ENABLE :
SII902X_TPI_AUDIO_MUTE_DISABLE;
dev_dbg(dev, "%s: %s\n", __func__, mute ? "Muted" : "Unmuted");
return regmap_update_bits(sii902x->regmap,
SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
SII902X_TPI_AUDIO_MUTE_ENABLE, val);
}
static const int sii902x_mclk_div_table[] = {
128, 256, 384, 512, 768, 1024, 1152, 192 };
static int sii902x_select_mclk_div(u8 *i2s_config_reg, unsigned int rate,
unsigned int mclk)
{
int div = mclk / rate;
int distance = 100000;
u8 i, nearest = 0;
for (i = 0; i < ARRAY_SIZE(sii902x_mclk_div_table); i++) {
unsigned int d = abs(div - sii902x_mclk_div_table[i]);
if (d >= distance)
continue;
nearest = i;
distance = d;
if (d == 0)
break;
}
*i2s_config_reg |= nearest << 4;
return sii902x_mclk_div_table[nearest];
}
static const struct sii902x_sample_freq {
u32 freq;
u8 val;
} sii902x_sample_freq[] = {
{ .freq = 32000, .val = SII902X_TPI_AUDIO_FREQ_32KHZ },
{ .freq = 44000, .val = SII902X_TPI_AUDIO_FREQ_44KHZ },
{ .freq = 48000, .val = SII902X_TPI_AUDIO_FREQ_48KHZ },
{ .freq = 88000, .val = SII902X_TPI_AUDIO_FREQ_88KHZ },
{ .freq = 96000, .val = SII902X_TPI_AUDIO_FREQ_96KHZ },
{ .freq = 176000, .val = SII902X_TPI_AUDIO_FREQ_176KHZ },
{ .freq = 192000, .val = SII902X_TPI_AUDIO_FREQ_192KHZ },
};
static int sii902x_audio_hw_params(struct device *dev, void *data,
struct hdmi_codec_daifmt *daifmt,
struct hdmi_codec_params *params)
{
struct sii902x *sii902x = dev_get_drvdata(dev);
u8 i2s_config_reg = SII902X_TPI_I2S_SD_DIRECTION_MSB_FIRST;
u8 config_byte2_reg = (SII902X_TPI_AUDIO_INTERFACE_I2S |
SII902X_TPI_AUDIO_MUTE_ENABLE |
SII902X_TPI_AUDIO_CODING_PCM);
u8 config_byte3_reg = 0;
u8 infoframe_buf[HDMI_INFOFRAME_SIZE(AUDIO)];
unsigned long mclk_rate;
int i, ret;
if (daifmt->bit_clk_provider || daifmt->frame_clk_provider) {
dev_dbg(dev, "%s: I2S clock provider mode not supported\n",
__func__);
return -EINVAL;
}
switch (daifmt->fmt) {
case HDMI_I2S:
i2s_config_reg |= SII902X_TPI_I2S_FIRST_BIT_SHIFT_YES |
SII902X_TPI_I2S_SD_JUSTIFY_LEFT;
break;
case HDMI_RIGHT_J:
i2s_config_reg |= SII902X_TPI_I2S_SD_JUSTIFY_RIGHT;
break;
case HDMI_LEFT_J:
i2s_config_reg |= SII902X_TPI_I2S_SD_JUSTIFY_LEFT;
break;
default:
dev_dbg(dev, "%s: Unsupported i2s format %u\n", __func__,
daifmt->fmt);
return -EINVAL;
}
if (daifmt->bit_clk_inv)
i2s_config_reg |= SII902X_TPI_I2S_SCK_EDGE_FALLING;
else
i2s_config_reg |= SII902X_TPI_I2S_SCK_EDGE_RISING;
if (daifmt->frame_clk_inv)
i2s_config_reg |= SII902X_TPI_I2S_WS_POLARITY_LOW;
else
i2s_config_reg |= SII902X_TPI_I2S_WS_POLARITY_HIGH;
if (params->channels > 2)
config_byte2_reg |= SII902X_TPI_AUDIO_LAYOUT_8_CHANNELS;
else
config_byte2_reg |= SII902X_TPI_AUDIO_LAYOUT_2_CHANNELS;
switch (params->sample_width) {
case 16:
config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_16;
break;
case 20:
config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_20;
break;
case 24:
case 32:
config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_24;
break;
default:
dev_err(dev, "%s: Unsupported sample width %u\n", __func__,
params->sample_width);
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(sii902x_sample_freq); i++) {
if (params->sample_rate == sii902x_sample_freq[i].freq) {
config_byte3_reg |= sii902x_sample_freq[i].val;
break;
}
}
ret = clk_prepare_enable(sii902x->audio.mclk);
if (ret) {
dev_err(dev, "Enabling mclk failed: %d\n", ret);
return ret;
}
if (sii902x->audio.mclk) {
mclk_rate = clk_get_rate(sii902x->audio.mclk);
ret = sii902x_select_mclk_div(&i2s_config_reg,
params->sample_rate, mclk_rate);
if (mclk_rate != ret * params->sample_rate)
dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n",
mclk_rate, ret, params->sample_rate);
}
mutex_lock(&sii902x->mutex);
ret = regmap_write(sii902x->regmap,
SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
config_byte2_reg);
if (ret < 0)
goto out;
ret = regmap_write(sii902x->regmap, SII902X_TPI_I2S_INPUT_CONFIG_REG,
i2s_config_reg);
if (ret)
goto out;
for (i = 0; i < ARRAY_SIZE(sii902x->audio.i2s_fifo_sequence) &&
sii902x->audio.i2s_fifo_sequence[i]; i++)
regmap_write(sii902x->regmap,
SII902X_TPI_I2S_ENABLE_MAPPING_REG,
sii902x->audio.i2s_fifo_sequence[i]);
ret = regmap_write(sii902x->regmap, SII902X_TPI_AUDIO_CONFIG_BYTE3_REG,
config_byte3_reg);
if (ret)
goto out;
ret = regmap_bulk_write(sii902x->regmap, SII902X_TPI_I2S_STRM_HDR_BASE,
params->iec.status,
min((size_t) SII902X_TPI_I2S_STRM_HDR_SIZE,
sizeof(params->iec.status)));
if (ret)
goto out;
ret = hdmi_audio_infoframe_pack(&params->cea, infoframe_buf,
sizeof(infoframe_buf));
if (ret < 0) {
dev_err(dev, "%s: Failed to pack audio infoframe: %d\n",
__func__, ret);
goto out;
}
ret = regmap_bulk_write(sii902x->regmap,
SII902X_TPI_MISC_INFOFRAME_BASE,
infoframe_buf,
min(ret, SII902X_TPI_MISC_INFOFRAME_SIZE));
if (ret)
goto out;
/* Decode Level 0 Packets */
ret = regmap_write(sii902x->regmap, SII902X_IND_SET_PAGE, 0x02);
if (ret)
goto out;
ret = regmap_write(sii902x->regmap, SII902X_IND_OFFSET, 0x24);
if (ret)
goto out;
ret = regmap_write(sii902x->regmap, SII902X_IND_VALUE, 0x02);
if (ret)
goto out;
dev_dbg(dev, "%s: hdmi audio enabled\n", __func__);
out:
mutex_unlock(&sii902x->mutex);
if (ret) {
clk_disable_unprepare(sii902x->audio.mclk);
dev_err(dev, "%s: hdmi audio enable failed: %d\n", __func__,
ret);
}
return ret;
}
static void sii902x_audio_shutdown(struct device *dev, void *data)
{
struct sii902x *sii902x = dev_get_drvdata(dev);
mutex_lock(&sii902x->mutex);
regmap_write(sii902x->regmap, SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
SII902X_TPI_AUDIO_INTERFACE_DISABLE);
mutex_unlock(&sii902x->mutex);
clk_disable_unprepare(sii902x->audio.mclk);
}
static int sii902x_audio_mute(struct device *dev, void *data,
bool enable, int direction)
{
struct sii902x *sii902x = dev_get_drvdata(dev);
mutex_lock(&sii902x->mutex);
sii902x_mute(sii902x, enable);
mutex_unlock(&sii902x->mutex);
return 0;
}
static int sii902x_audio_get_eld(struct device *dev, void *data,
uint8_t *buf, size_t len)
{
struct sii902x *sii902x = dev_get_drvdata(dev);
mutex_lock(&sii902x->mutex);
memcpy(buf, sii902x->connector.eld,
min(sizeof(sii902x->connector.eld), len));
mutex_unlock(&sii902x->mutex);
return 0;
}
static int sii902x_audio_get_dai_id(struct snd_soc_component *component,
struct device_node *endpoint,
void *data)
{
struct of_endpoint of_ep;
int ret;
ret = of_graph_parse_endpoint(endpoint, &of_ep);
if (ret < 0)
return ret;
/*
* HDMI sound should be located at reg = <3>
* Return expected DAI index 0.
*/
if (of_ep.port == SII902X_AUDIO_PORT_INDEX)
return 0;
return -EINVAL;
}
static const struct hdmi_codec_ops sii902x_audio_codec_ops = {
.hw_params = sii902x_audio_hw_params,
.audio_shutdown = sii902x_audio_shutdown,
.mute_stream = sii902x_audio_mute,
.get_eld = sii902x_audio_get_eld,
.get_dai_id = sii902x_audio_get_dai_id,
};
static int sii902x_audio_codec_init(struct sii902x *sii902x,
struct device *dev)
{
static const u8 audio_fifo_id[] = {
SII902X_TPI_I2S_CONFIG_FIFO0,
SII902X_TPI_I2S_CONFIG_FIFO1,
SII902X_TPI_I2S_CONFIG_FIFO2,
SII902X_TPI_I2S_CONFIG_FIFO3,
};
static const u8 i2s_lane_id[] = {
SII902X_TPI_I2S_SELECT_SD0,
SII902X_TPI_I2S_SELECT_SD1,
SII902X_TPI_I2S_SELECT_SD2,
SII902X_TPI_I2S_SELECT_SD3,
};
struct hdmi_codec_pdata codec_data = {
.ops = &sii902x_audio_codec_ops,
.i2s = 1, /* Only i2s support for now. */
.spdif = 0,
.max_i2s_channels = 0,
.no_capture_mute = 1,
};
u8 lanes[4];
int num_lanes, i;
if (!of_property_present(dev->of_node, "#sound-dai-cells")) {
dev_dbg(dev, "%s: No \"#sound-dai-cells\", no audio\n",
__func__);
return 0;
}
num_lanes = of_property_read_variable_u8_array(dev->of_node,
"sil,i2s-data-lanes",
lanes, 1,
ARRAY_SIZE(lanes));
if (num_lanes == -EINVAL) {
dev_dbg(dev,
"%s: No \"sil,i2s-data-lanes\", use default <0>\n",
__func__);
num_lanes = 1;
lanes[0] = 0;
} else if (num_lanes < 0) {
dev_err(dev,
"%s: Error getting \"sil,i2s-data-lanes\": %d\n",
__func__, num_lanes);
return num_lanes;
}
codec_data.max_i2s_channels = 2 * num_lanes;
for (i = 0; i < num_lanes; i++)
sii902x->audio.i2s_fifo_sequence[i] |= audio_fifo_id[i] |
i2s_lane_id[lanes[i]] | SII902X_TPI_I2S_FIFO_ENABLE;
sii902x->audio.mclk = devm_clk_get_optional(dev, "mclk");
if (IS_ERR(sii902x->audio.mclk)) {
dev_err(dev, "%s: No clock (audio mclk) found: %ld\n",
__func__, PTR_ERR(sii902x->audio.mclk));
return PTR_ERR(sii902x->audio.mclk);
}
sii902x->audio.pdev = platform_device_register_data(
dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
&codec_data, sizeof(codec_data));
return PTR_ERR_OR_ZERO(sii902x->audio.pdev);
}
static const struct regmap_range sii902x_volatile_ranges[] = {
{ .range_min = 0, .range_max = 0xff },
};
static const struct regmap_access_table sii902x_volatile_table = {
.yes_ranges = sii902x_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
};
static const struct regmap_config sii902x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.disable_locking = true, /* struct sii902x mutex should be enough */
.max_register = SII902X_TPI_MISC_INFOFRAME_END,
.volatile_table = &sii902x_volatile_table,
.cache_type = REGCACHE_NONE,
};
static irqreturn_t sii902x_interrupt(int irq, void *data)
{
struct sii902x *sii902x = data;
unsigned int status = 0;
mutex_lock(&sii902x->mutex);
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
mutex_unlock(&sii902x->mutex);
if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev) {
drm_helper_hpd_irq_event(sii902x->bridge.dev);
drm_bridge_hpd_notify(&sii902x->bridge, (status & SII902X_PLUGGED_STATUS)
? connector_status_connected
: connector_status_disconnected);
}
return IRQ_HANDLED;
}
/*
* The purpose of sii902x_i2c_bypass_select is to enable the pass through
* mode of the HDMI transmitter. Do not use regmap from within this function,
* only use sii902x_*_unlocked functions to read/modify/write registers.
* We are holding the parent adapter lock here, keep this in mind before
* adding more i2c transactions.
*
* Also, since SII902X_SYS_CTRL_DATA is used with regmap_update_bits elsewhere
* in this driver, we need to make sure that we only touch 0x1A[2:1] from
* within sii902x_i2c_bypass_select and sii902x_i2c_bypass_deselect, and that
* we leave the remaining bits as we have found them.
*/
static int sii902x_i2c_bypass_select(struct i2c_mux_core *mux, u32 chan_id)
{
struct sii902x *sii902x = i2c_mux_priv(mux);
struct device *dev = &sii902x->i2c->dev;
unsigned long timeout;
u8 status;
int ret;
ret = sii902x_update_bits_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
SII902X_SYS_CTRL_DDC_BUS_REQ,
SII902X_SYS_CTRL_DDC_BUS_REQ);
if (ret)
return ret;
timeout = jiffies +
msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
do {
ret = sii902x_read_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
&status);
if (ret)
return ret;
} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
time_before(jiffies, timeout));
if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
dev_err(dev, "Failed to acquire the i2c bus\n");
return -ETIMEDOUT;
}
return sii902x_write_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
status);
}
/*
* The purpose of sii902x_i2c_bypass_deselect is to disable the pass through
* mode of the HDMI transmitter. Do not use regmap from within this function,
* only use sii902x_*_unlocked functions to read/modify/write registers.
* We are holding the parent adapter lock here, keep this in mind before
* adding more i2c transactions.
*
* Also, since SII902X_SYS_CTRL_DATA is used with regmap_update_bits elsewhere
* in this driver, we need to make sure that we only touch 0x1A[2:1] from
* within sii902x_i2c_bypass_select and sii902x_i2c_bypass_deselect, and that
* we leave the remaining bits as we have found them.
*/
static int sii902x_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
{
struct sii902x *sii902x = i2c_mux_priv(mux);
struct device *dev = &sii902x->i2c->dev;
unsigned long timeout;
unsigned int retries;
u8 status;
int ret;
/*
* When the HDMI transmitter is in pass through mode, we need an
* (undocumented) additional delay between STOP and START conditions
* to guarantee the bus won't get stuck.
*/
udelay(30);
/*
* Sometimes the I2C bus can stall after failure to use the
* EDID channel. Retry a few times to see if things clear
* up, else continue anyway.
*/
retries = 5;
do {
ret = sii902x_read_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
&status);
retries--;
} while (ret && retries);
if (ret) {
dev_err(dev, "failed to read status (%d)\n", ret);
return ret;
}
ret = sii902x_update_bits_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
SII902X_SYS_CTRL_DDC_BUS_REQ |
SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
if (ret)
return ret;
timeout = jiffies +
msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
do {
ret = sii902x_read_unlocked(sii902x->i2c, SII902X_SYS_CTRL_DATA,
&status);
if (ret)
return ret;
} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
time_before(jiffies, timeout));
if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
dev_err(dev, "failed to release the i2c bus\n");
return -ETIMEDOUT;
}
return 0;
}
static const struct drm_bridge_timings default_sii902x_timings = {
.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
| DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
| DRM_BUS_FLAG_DE_HIGH,
};
static int sii902x_init(struct sii902x *sii902x)
{
struct device *dev = &sii902x->i2c->dev;
unsigned int status = 0;
u8 chipid[4];
int ret;
sii902x_reset(sii902x);
ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
if (ret)
return ret;
ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
&chipid, 4);
if (ret) {
dev_err(dev, "regmap_read failed %d\n", ret);
return ret;
}
if (chipid[0] != 0xb0) {
dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
chipid[0]);
return -EINVAL;
}
/* Clear all pending interrupts */
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
if (sii902x->i2c->irq > 0) {
regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
SII902X_HOTPLUG_EVENT);
ret = devm_request_threaded_irq(dev, sii902x->i2c->irq, NULL,
sii902x_interrupt,
IRQF_ONESHOT, dev_name(dev),
sii902x);
if (ret)
return ret;
}
ret = sii902x_audio_codec_init(sii902x, dev);
if (ret)
return ret;
i2c_set_clientdata(sii902x->i2c, sii902x);
sii902x->i2cmux = i2c_mux_alloc(sii902x->i2c->adapter, dev,
1, 0, I2C_MUX_GATE,
sii902x_i2c_bypass_select,
sii902x_i2c_bypass_deselect);
if (!sii902x->i2cmux) {
ret = -ENOMEM;
goto err_unreg_audio;
}
sii902x->i2cmux->priv = sii902x;
ret = i2c_mux_add_adapter(sii902x->i2cmux, 0, 0);
if (ret)
goto err_unreg_audio;
sii902x->bridge.of_node = dev->of_node;
sii902x->bridge.timings = &default_sii902x_timings;
sii902x->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
sii902x->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
if (sii902x->i2c->irq > 0)
sii902x->bridge.ops |= DRM_BRIDGE_OP_HPD;
drm_bridge_add(&sii902x->bridge);
return 0;
err_unreg_audio:
if (!PTR_ERR_OR_ZERO(sii902x->audio.pdev))
platform_device_unregister(sii902x->audio.pdev);
return ret;
}
static int sii902x_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device_node *endpoint;
struct sii902x *sii902x;
static const char * const supplies[] = {"iovcc", "cvcc12"};
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(dev, "I2C adapter not suitable\n");
return -EIO;
}
sii902x = devm_drm_bridge_alloc(dev, struct sii902x, bridge, &sii902x_bridge_funcs);
if (IS_ERR(sii902x))
return PTR_ERR(sii902x);
sii902x->i2c = client;
sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
if (IS_ERR(sii902x->regmap))
return PTR_ERR(sii902x->regmap);
sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(sii902x->reset_gpio)) {
dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
PTR_ERR(sii902x->reset_gpio));
return PTR_ERR(sii902x->reset_gpio);
}
sii902x->bus_width = 24;
endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
if (endpoint)
of_property_read_u32(endpoint, "bus-width", &sii902x->bus_width);
endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
if (endpoint) {
struct device_node *remote = of_graph_get_remote_port_parent(endpoint);
of_node_put(endpoint);
if (!remote) {
dev_err(dev, "Endpoint in port@1 unconnected\n");
return -ENODEV;
}
if (!of_device_is_available(remote)) {
dev_err(dev, "port@1 remote device is disabled\n");
of_node_put(remote);
return -ENODEV;
}
sii902x->bridge.next_bridge = of_drm_find_and_get_bridge(remote);
of_node_put(remote);
if (!sii902x->bridge.next_bridge)
return dev_err_probe(dev, -EPROBE_DEFER,
"Failed to find remote bridge\n");
}
mutex_init(&sii902x->mutex);
ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(supplies), supplies);
if (ret < 0)
return dev_err_probe(dev, ret, "Failed to enable supplies");
return sii902x_init(sii902x);
}
static void sii902x_remove(struct i2c_client *client)
{
struct sii902x *sii902x = i2c_get_clientdata(client);
drm_bridge_remove(&sii902x->bridge);
i2c_mux_del_adapters(sii902x->i2cmux);
if (!PTR_ERR_OR_ZERO(sii902x->audio.pdev))
platform_device_unregister(sii902x->audio.pdev);
}
static const struct of_device_id sii902x_dt_ids[] = {
{ .compatible = "sil,sii9022", },
{ }
};
MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
static const struct i2c_device_id sii902x_i2c_ids[] = {
{ .name = "sii9022" },
{ }
};
MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
static struct i2c_driver sii902x_driver = {
.probe = sii902x_probe,
.remove = sii902x_remove,
.driver = {
.name = "sii902x",
.of_match_table = sii902x_dt_ids,
},
.id_table = sii902x_i2c_ids,
};
module_i2c_driver(sii902x_driver);
MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
MODULE_LICENSE("GPL");