| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) 2019 Renesas Electronics Corporation | |
| * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> | |
| */ | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/media-bus-format.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_graph.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_bridge.h> | |
| #include <drm/drm_of.h> | |
| #include <drm/drm_panel.h> | |
| struct lvds_codec { | |
| struct device *dev; | |
| struct drm_bridge bridge; | |
| struct drm_bridge *panel_bridge; | |
| struct drm_bridge_timings timings; | |
| struct regulator *vcc; | |
| struct gpio_desc *powerdown_gpio; | |
| u32 connector_type; | |
| unsigned int bus_format; | |
| }; | |
| static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge) | |
| { | |
| return container_of(bridge, struct lvds_codec, bridge); | |
| } | |
| static int lvds_codec_attach(struct drm_bridge *bridge, | |
| struct drm_encoder *encoder, | |
| enum drm_bridge_attach_flags flags) | |
| { | |
| struct lvds_codec *lvds_codec = to_lvds_codec(bridge); | |
| return drm_bridge_attach(encoder, lvds_codec->panel_bridge, | |
| bridge, flags); | |
| } | |
| static void lvds_codec_enable(struct drm_bridge *bridge, | |
| struct drm_atomic_commit *commit) | |
| { | |
| struct lvds_codec *lvds_codec = to_lvds_codec(bridge); | |
| int ret; | |
| ret = regulator_enable(lvds_codec->vcc); | |
| if (ret) { | |
| dev_err(lvds_codec->dev, | |
| "Failed to enable regulator \"vcc\": %d\n", ret); | |
| return; | |
| } | |
| if (lvds_codec->powerdown_gpio) | |
| gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); | |
| } | |
| static void lvds_codec_disable(struct drm_bridge *bridge, | |
| struct drm_atomic_commit *commit) | |
| { | |
| struct lvds_codec *lvds_codec = to_lvds_codec(bridge); | |
| int ret; | |
| if (lvds_codec->powerdown_gpio) | |
| gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); | |
| ret = regulator_disable(lvds_codec->vcc); | |
| if (ret) | |
| dev_err(lvds_codec->dev, | |
| "Failed to disable regulator \"vcc\": %d\n", ret); | |
| } | |
| #define MAX_INPUT_SEL_FORMATS 1 | |
| static u32 * | |
| lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge, | |
| struct drm_bridge_state *bridge_state, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state, | |
| u32 output_fmt, | |
| unsigned int *num_input_fmts) | |
| { | |
| struct lvds_codec *lvds_codec = to_lvds_codec(bridge); | |
| u32 *input_fmts; | |
| *num_input_fmts = 0; | |
| input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), | |
| GFP_KERNEL); | |
| if (!input_fmts) | |
| return NULL; | |
| input_fmts[0] = lvds_codec->bus_format; | |
| *num_input_fmts = MAX_INPUT_SEL_FORMATS; | |
| return input_fmts; | |
| } | |
| static const struct drm_bridge_funcs funcs = { | |
| .attach = lvds_codec_attach, | |
| .atomic_enable = lvds_codec_enable, | |
| .atomic_disable = lvds_codec_disable, | |
| .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, | |
| .atomic_create_state = drm_atomic_helper_bridge_create_state, | |
| .atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts, | |
| }; | |
| static int lvds_codec_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *panel_node; | |
| struct device_node *bus_node; | |
| struct drm_panel *panel; | |
| struct lvds_codec *lvds_codec; | |
| u32 val; | |
| int ret; | |
| lvds_codec = devm_drm_bridge_alloc(dev, struct lvds_codec, bridge, | |
| &funcs); | |
| if (IS_ERR(lvds_codec)) | |
| return PTR_ERR(lvds_codec); | |
| lvds_codec->dev = &pdev->dev; | |
| lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev); | |
| lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power"); | |
| if (IS_ERR(lvds_codec->vcc)) | |
| return dev_err_probe(dev, PTR_ERR(lvds_codec->vcc), | |
| "Unable to get \"vcc\" supply\n"); | |
| lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(lvds_codec->powerdown_gpio)) | |
| return dev_err_probe(dev, PTR_ERR(lvds_codec->powerdown_gpio), | |
| "powerdown GPIO failure\n"); | |
| /* Locate the panel DT node. */ | |
| panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); | |
| if (!panel_node) { | |
| dev_dbg(dev, "panel DT node not found\n"); | |
| return -ENXIO; | |
| } | |
| panel = of_drm_find_panel(panel_node); | |
| of_node_put(panel_node); | |
| if (IS_ERR(panel)) { | |
| dev_dbg(dev, "panel not found, deferring probe\n"); | |
| return PTR_ERR(panel); | |
| } | |
| lvds_codec->panel_bridge = | |
| devm_drm_panel_bridge_add_typed(dev, panel, | |
| lvds_codec->connector_type); | |
| drm_panel_put(panel); | |
| if (IS_ERR(lvds_codec->panel_bridge)) | |
| return PTR_ERR(lvds_codec->panel_bridge); | |
| /* | |
| * Decoder input LVDS format is a property of the decoder chip or even | |
| * its strapping. Handle data-mapping the same way lvds-panel does. In | |
| * case data-mapping is not present, do nothing, since there are still | |
| * legacy bindings which do not specify this property. | |
| */ | |
| if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) { | |
| bus_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); | |
| if (!bus_node) { | |
| dev_dbg(dev, "bus DT node not found\n"); | |
| return -ENXIO; | |
| } | |
| ret = drm_of_lvds_get_data_mapping(bus_node); | |
| of_node_put(bus_node); | |
| if (ret == -ENODEV) { | |
| dev_warn(dev, "missing 'data-mapping' DT property\n"); | |
| } else if (ret < 0) { | |
| dev_err(dev, "invalid 'data-mapping' DT property\n"); | |
| return ret; | |
| } else { | |
| lvds_codec->bus_format = ret; | |
| } | |
| } else { | |
| lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X24; | |
| } | |
| /* | |
| * Encoder might sample data on different clock edge than the display, | |
| * for example OnSemi FIN3385 has a dedicated strapping pin to select | |
| * the sampling edge. | |
| */ | |
| if (lvds_codec->connector_type == DRM_MODE_CONNECTOR_LVDS && | |
| !of_property_read_u32(dev->of_node, "pclk-sample", &val)) { | |
| lvds_codec->timings.input_bus_flags = val ? | |
| DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE : | |
| DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; | |
| } | |
| /* | |
| * The panel_bridge bridge is attached to the panel's of_node, | |
| * but we need a bridge attached to our of_node for our user | |
| * to look up. | |
| */ | |
| lvds_codec->bridge.of_node = dev->of_node; | |
| lvds_codec->bridge.timings = &lvds_codec->timings; | |
| drm_bridge_add(&lvds_codec->bridge); | |
| platform_set_drvdata(pdev, lvds_codec); | |
| return 0; | |
| } | |
| static void lvds_codec_remove(struct platform_device *pdev) | |
| { | |
| struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); | |
| drm_bridge_remove(&lvds_codec->bridge); | |
| } | |
| static const struct of_device_id lvds_codec_match[] = { | |
| { | |
| .compatible = "lvds-decoder", | |
| .data = (void *)DRM_MODE_CONNECTOR_DPI, | |
| }, | |
| { | |
| .compatible = "lvds-encoder", | |
| .data = (void *)DRM_MODE_CONNECTOR_LVDS, | |
| }, | |
| { | |
| .compatible = "thine,thc63lvdm83d", | |
| .data = (void *)DRM_MODE_CONNECTOR_LVDS, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, lvds_codec_match); | |
| static struct platform_driver lvds_codec_driver = { | |
| .probe = lvds_codec_probe, | |
| .remove = lvds_codec_remove, | |
| .driver = { | |
| .name = "lvds-codec", | |
| .of_match_table = lvds_codec_match, | |
| }, | |
| }; | |
| module_platform_driver(lvds_codec_driver); | |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | |
| MODULE_DESCRIPTION("LVDS encoders and decoders"); | |
| MODULE_LICENSE("GPL"); |