| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/module.h> | |
| #include <drm/drm_atomic_state_helper.h> | |
| #include <drm/drm_edid.h> | |
| #include <drm/drm_modeset_helper_vtables.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "ast_drv.h" | |
| MODULE_FIRMWARE("ast_dp501_fw.bin"); | |
| static void ast_release_firmware(void *data) | |
| { | |
| struct ast_device *ast = data; | |
| release_firmware(ast->dp501_fw); | |
| ast->dp501_fw = NULL; | |
| } | |
| static int ast_load_dp501_microcode(struct ast_device *ast) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| int ret; | |
| ret = request_firmware(&ast->dp501_fw, "ast_dp501_fw.bin", dev->dev); | |
| if (ret) | |
| return ret; | |
| return devm_add_action_or_reset(dev->dev, ast_release_firmware, ast); | |
| } | |
| static void send_ack(struct ast_device *ast) | |
| { | |
| u8 sendack; | |
| sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff); | |
| sendack |= 0x80; | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack); | |
| } | |
| static void send_nack(struct ast_device *ast) | |
| { | |
| u8 sendack; | |
| sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff); | |
| sendack &= ~0x80; | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack); | |
| } | |
| static bool wait_ack(struct ast_device *ast) | |
| { | |
| u8 waitack; | |
| u32 retry = 0; | |
| do { | |
| waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); | |
| waitack &= 0x80; | |
| udelay(100); | |
| } while ((!waitack) && (retry++ < 1000)); | |
| if (retry < 1000) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static bool wait_nack(struct ast_device *ast) | |
| { | |
| u8 waitack; | |
| u32 retry = 0; | |
| do { | |
| waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); | |
| waitack &= 0x80; | |
| udelay(100); | |
| } while ((waitack) && (retry++ < 1000)); | |
| if (retry < 1000) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static void set_cmd_trigger(struct ast_device *ast) | |
| { | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x40); | |
| } | |
| static void clear_cmd_trigger(struct ast_device *ast) | |
| { | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x00); | |
| } | |
| #if 0 | |
| static bool wait_fw_ready(struct ast_device *ast) | |
| { | |
| u8 waitready; | |
| u32 retry = 0; | |
| do { | |
| waitready = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); | |
| waitready &= 0x40; | |
| udelay(100); | |
| } while ((!waitready) && (retry++ < 1000)); | |
| if (retry < 1000) | |
| return true; | |
| else | |
| return false; | |
| } | |
| #endif | |
| static bool ast_write_cmd(struct ast_device *ast, u8 data) | |
| { | |
| int retry = 0; | |
| if (wait_nack(ast)) { | |
| send_nack(ast); | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data); | |
| send_ack(ast); | |
| set_cmd_trigger(ast); | |
| do { | |
| if (wait_ack(ast)) { | |
| clear_cmd_trigger(ast); | |
| send_nack(ast); | |
| return true; | |
| } | |
| } while (retry++ < 100); | |
| } | |
| clear_cmd_trigger(ast); | |
| send_nack(ast); | |
| return false; | |
| } | |
| static bool ast_write_data(struct ast_device *ast, u8 data) | |
| { | |
| if (wait_nack(ast)) { | |
| send_nack(ast); | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data); | |
| send_ack(ast); | |
| if (wait_ack(ast)) { | |
| send_nack(ast); | |
| return true; | |
| } | |
| } | |
| send_nack(ast); | |
| return false; | |
| } | |
| #if 0 | |
| static bool ast_read_data(struct drm_device *dev, u8 *data) | |
| { | |
| struct ast_device *ast = to_ast_device(dev); | |
| u8 tmp; | |
| *data = 0; | |
| if (wait_ack(ast) == false) | |
| return false; | |
| tmp = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd3, 0xff); | |
| *data = tmp; | |
| if (wait_nack(ast) == false) { | |
| send_nack(ast); | |
| return false; | |
| } | |
| send_nack(ast); | |
| return true; | |
| } | |
| static void clear_cmd(struct ast_device *ast) | |
| { | |
| send_nack(ast); | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, 0x00); | |
| } | |
| #endif | |
| static void ast_set_dp501_video_output(struct ast_device *ast, u8 mode) | |
| { | |
| ast_write_cmd(ast, 0x40); | |
| ast_write_data(ast, mode); | |
| msleep(10); | |
| } | |
| static u32 get_fw_base(struct ast_device *ast) | |
| { | |
| return ast_mindwm(ast, AST_REG_SCU104) & 0x7fffffff; | |
| } | |
| bool ast_backup_fw(struct ast_device *ast, u8 *addr, u32 size) | |
| { | |
| u32 i, data; | |
| u32 boot_address; | |
| if (ast->config_mode != ast_use_p2a) | |
| return false; | |
| data = ast_mindwm(ast, AST_REG_SCU100) & 0x01; | |
| if (data) { | |
| boot_address = get_fw_base(ast); | |
| for (i = 0; i < size; i += 4) | |
| *(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static bool ast_launch_m68k(struct ast_device *ast) | |
| { | |
| u32 i, data, len = 0; | |
| u32 boot_address; | |
| u8 *fw_addr = NULL; | |
| u8 jreg; | |
| if (ast->config_mode != ast_use_p2a) | |
| return false; | |
| data = ast_mindwm(ast, AST_REG_SCU100) & 0x01; | |
| if (!data) { | |
| if (ast->dp501_fw_addr) { | |
| fw_addr = ast->dp501_fw_addr; | |
| len = 32*1024; | |
| } else { | |
| if (!ast->dp501_fw && | |
| ast_load_dp501_microcode(ast) < 0) | |
| return false; | |
| fw_addr = (u8 *)ast->dp501_fw->data; | |
| len = ast->dp501_fw->size; | |
| } | |
| /* Get BootAddress */ | |
| ast_moutdwm(ast, AST_REG_SCU000, AST_REG_SCU000_PROTECTION_KEY); | |
| data = ast_mindwm(ast, AST_REG_MCR04); | |
| switch (data & 0x03) { | |
| case 0: | |
| boot_address = 0x44000000; | |
| break; | |
| default: | |
| case 1: | |
| boot_address = 0x48000000; | |
| break; | |
| case 2: | |
| boot_address = 0x50000000; | |
| break; | |
| case 3: | |
| boot_address = 0x60000000; | |
| break; | |
| } | |
| boot_address -= 0x200000; /* -2MB */ | |
| /* copy image to buffer */ | |
| for (i = 0; i < len; i += 4) { | |
| data = *(u32 *)(fw_addr + i); | |
| ast_moutdwm(ast, boot_address + i, data); | |
| } | |
| /* Init SCU */ | |
| ast_moutdwm(ast, AST_REG_SCU000, AST_REG_SCU000_PROTECTION_KEY); | |
| /* Launch FW */ | |
| ast_moutdwm(ast, AST_REG_SCU104, 0x80000000 + boot_address); | |
| ast_moutdwm(ast, AST_REG_SCU100, 1); | |
| /* Update Scratch */ | |
| data = ast_mindwm(ast, AST_REG_SCU040) & 0xfffff1ff; | |
| data |= 0x800; /* D[11:9] = 100b: UEFI handling */ | |
| ast_moutdwm(ast, AST_REG_SCU040, data); | |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */ | |
| jreg |= 0x02; | |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0x99, jreg); | |
| } | |
| return true; | |
| } | |
| static bool ast_dp501_is_connected(struct ast_device *ast) | |
| { | |
| u32 boot_address, offset, data; | |
| if (ast->config_mode == ast_use_p2a) { | |
| boot_address = get_fw_base(ast); | |
| /* validate FW version */ | |
| offset = AST_DP501_GBL_VERSION; | |
| data = ast_mindwm(ast, boot_address + offset); | |
| if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1) | |
| return false; | |
| /* validate PnP Monitor */ | |
| offset = AST_DP501_PNPMONITOR; | |
| data = ast_mindwm(ast, boot_address + offset); | |
| if (!(data & AST_DP501_PNP_CONNECTED)) | |
| return false; | |
| } else { | |
| if (!ast->dp501_fw_buf) | |
| return false; | |
| /* dummy read */ | |
| offset = 0x0000; | |
| data = readl(ast->dp501_fw_buf + offset); | |
| /* validate FW version */ | |
| offset = AST_DP501_GBL_VERSION; | |
| data = readl(ast->dp501_fw_buf + offset); | |
| if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1) | |
| return false; | |
| /* validate PnP Monitor */ | |
| offset = AST_DP501_PNPMONITOR; | |
| data = readl(ast->dp501_fw_buf + offset); | |
| if (!(data & AST_DP501_PNP_CONNECTED)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int ast_dp512_read_edid_block(void *data, u8 *buf, unsigned int block, size_t len) | |
| { | |
| struct ast_device *ast = data; | |
| size_t rdlen = round_up(len, 4); | |
| u32 i, boot_address, offset, ediddata; | |
| if (block > (512 / EDID_LENGTH)) | |
| return -EIO; | |
| offset = AST_DP501_EDID_DATA + block * EDID_LENGTH; | |
| if (ast->config_mode == ast_use_p2a) { | |
| boot_address = get_fw_base(ast); | |
| for (i = 0; i < rdlen; i += 4) { | |
| ediddata = ast_mindwm(ast, boot_address + offset + i); | |
| memcpy(buf, &ediddata, min((len - i), 4)); | |
| buf += 4; | |
| } | |
| } else { | |
| for (i = 0; i < rdlen; i += 4) { | |
| ediddata = readl(ast->dp501_fw_buf + offset + i); | |
| memcpy(buf, &ediddata, min((len - i), 4)); | |
| buf += 4; | |
| } | |
| } | |
| return true; | |
| } | |
| static bool ast_init_dvo(struct ast_device *ast) | |
| { | |
| u8 jreg; | |
| u32 scu02c; | |
| ast_moutdwm(ast, AST_REG_SCU000, AST_REG_SCU000_PROTECTION_KEY); | |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff); | |
| if (!(jreg & 0x80)) { | |
| u32 scu008; | |
| /* Init SCU DVO Settings */ | |
| scu008 = ast_mindwm(ast, AST_REG_SCU008); | |
| scu008 &= 0xfffff8ff; | |
| scu008 |= 0x00000500; /* delay phase */ | |
| ast_moutdwm(ast, AST_REG_SCU008, scu008); | |
| if (IS_AST_GEN4(ast)) { | |
| u32 scu084, scu088, scu090; | |
| scu084 = ast_mindwm(ast, AST_REG_SCU084); | |
| scu084 |= 0xfffe0000; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU084, scu084); | |
| scu088 = ast_mindwm(ast, AST_REG_SCU088); | |
| scu088 |= 0x000fffff; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU088, scu088); | |
| scu090 = ast_mindwm(ast, AST_REG_SCU090); | |
| scu090 &= 0xffffffcf; | |
| scu090 |= 0x00000020; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU090, scu090); | |
| } else { /* AST GEN5+ */ | |
| u32 scu088, scu08c, scu0a4, scu0a8, scu094; | |
| scu088 = ast_mindwm(ast, AST_REG_SCU088); | |
| scu088 |= 0x30000000; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU088, scu088); | |
| scu08c = ast_mindwm(ast, AST_REG_SCU08C); | |
| scu08c |= 0x000000cf; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU08C, scu08c); | |
| scu0a4 = ast_mindwm(ast, AST_REG_SCU0A4); | |
| scu0a4 |= 0xffff0000; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU0A4, scu0a4); | |
| scu0a8 = ast_mindwm(ast, AST_REG_SCU0A8); | |
| scu0a8 |= 0x0000000f; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU0A8, scu0a8); | |
| scu094 = ast_mindwm(ast, AST_REG_SCU094); | |
| scu094 |= 0x00000002; /* multi-pins for DVO single-edge */ | |
| ast_moutdwm(ast, AST_REG_SCU094, scu094); | |
| } | |
| } | |
| /* Force to DVO */ | |
| scu02c = ast_mindwm(ast, AST_REG_SCU02C); | |
| scu02c &= 0xfffbffff; | |
| ast_moutdwm(ast, AST_REG_SCU02C, scu02c); | |
| /* Init VGA DVO Settings */ | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x80); | |
| return true; | |
| } | |
| static void ast_init_analog(struct ast_device *ast) | |
| { | |
| u32 scu02c; | |
| /* | |
| * Set DAC source to VGA mode in SCU2C via the P2A | |
| * bridge. | |
| */ | |
| /* Unlock the SCU with the magic password */ | |
| ast_moutdwm_poll(ast, AST_REG_SCU000, AST_REG_SCU000_PROTECTION_KEY, 0x01); | |
| /* Clear bits [17:16] of SCU2C */ | |
| scu02c = ast_mindwm(ast, AST_REG_SCU02C); | |
| scu02c &= 0xfffcffff; | |
| ast_moutdwm(ast, AST_REG_SCU02C, scu02c); | |
| /* Disable DVO */ | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x00); | |
| } | |
| void ast_init_3rdtx(struct ast_device *ast) | |
| { | |
| u8 vgacrd1; | |
| if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) { | |
| vgacrd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, | |
| AST_IO_VGACRD1_TX_TYPE_MASK); | |
| switch (vgacrd1) { | |
| case AST_IO_VGACRD1_TX_SIL164_VBIOS: | |
| ast_init_dvo(ast); | |
| break; | |
| case AST_IO_VGACRD1_TX_DP501_VBIOS: | |
| ast_launch_m68k(ast); | |
| break; | |
| case AST_IO_VGACRD1_TX_FW_EMBEDDED_FW: | |
| ast_init_dvo(ast); | |
| break; | |
| default: | |
| if (ast->tx_chip == AST_TX_SIL164) | |
| ast_init_dvo(ast); | |
| else | |
| ast_init_analog(ast); | |
| } | |
| } | |
| } | |
| /* | |
| * Encoder | |
| */ | |
| static const struct drm_encoder_funcs ast_dp501_encoder_funcs = { | |
| .destroy = drm_encoder_cleanup, | |
| }; | |
| static void ast_dp501_encoder_helper_atomic_enable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct ast_device *ast = to_ast_device(encoder->dev); | |
| ast_set_dp501_video_output(ast, 1); | |
| } | |
| static void ast_dp501_encoder_helper_atomic_disable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct ast_device *ast = to_ast_device(encoder->dev); | |
| ast_set_dp501_video_output(ast, 0); | |
| } | |
| static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = { | |
| .atomic_enable = ast_dp501_encoder_helper_atomic_enable, | |
| .atomic_disable = ast_dp501_encoder_helper_atomic_disable, | |
| }; | |
| /* | |
| * Connector | |
| */ | |
| static int ast_dp501_connector_helper_get_modes(struct drm_connector *connector) | |
| { | |
| struct ast_connector *ast_connector = to_ast_connector(connector); | |
| int count; | |
| if (ast_connector->physical_status == connector_status_connected) { | |
| struct ast_device *ast = to_ast_device(connector->dev); | |
| const struct drm_edid *drm_edid; | |
| drm_edid = drm_edid_read_custom(connector, ast_dp512_read_edid_block, ast); | |
| drm_edid_connector_update(connector, drm_edid); | |
| count = drm_edid_connector_add_modes(connector); | |
| drm_edid_free(drm_edid); | |
| } else { | |
| drm_edid_connector_update(connector, NULL); | |
| /* | |
| * There's no EDID data without a connected monitor. Set BMC- | |
| * compatible modes in this case. The XGA default resolution | |
| * should work well for all BMCs. | |
| */ | |
| count = drm_add_modes_noedid(connector, 4096, 4096); | |
| if (count) | |
| drm_set_preferred_mode(connector, 1024, 768); | |
| } | |
| return count; | |
| } | |
| static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector, | |
| struct drm_modeset_acquire_ctx *ctx, | |
| bool force) | |
| { | |
| struct ast_connector *ast_connector = to_ast_connector(connector); | |
| struct ast_device *ast = to_ast_device(connector->dev); | |
| enum drm_connector_status status = connector_status_disconnected; | |
| if (ast_dp501_is_connected(ast)) | |
| status = connector_status_connected; | |
| if (status != ast_connector->physical_status) | |
| ++connector->epoch_counter; | |
| ast_connector->physical_status = status; | |
| return connector_status_connected; | |
| } | |
| static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = { | |
| .get_modes = ast_dp501_connector_helper_get_modes, | |
| .detect_ctx = ast_dp501_connector_helper_detect_ctx, | |
| }; | |
| static const struct drm_connector_funcs ast_dp501_connector_funcs = { | |
| .reset = drm_atomic_helper_connector_reset, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .destroy = drm_connector_cleanup, | |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| }; | |
| /* | |
| * Output | |
| */ | |
| int ast_dp501_output_init(struct ast_device *ast) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| struct drm_crtc *crtc = &ast->crtc; | |
| struct drm_encoder *encoder; | |
| struct ast_connector *ast_connector; | |
| struct drm_connector *connector; | |
| int ret; | |
| /* encoder */ | |
| encoder = &ast->output.dp501.encoder; | |
| ret = drm_encoder_init(dev, encoder, &ast_dp501_encoder_funcs, | |
| DRM_MODE_ENCODER_TMDS, NULL); | |
| if (ret) | |
| return ret; | |
| drm_encoder_helper_add(encoder, &ast_dp501_encoder_helper_funcs); | |
| encoder->possible_crtcs = drm_crtc_mask(crtc); | |
| /* connector */ | |
| ast_connector = &ast->output.dp501.connector; | |
| connector = &ast_connector->base; | |
| ret = drm_connector_init(dev, connector, &ast_dp501_connector_funcs, | |
| DRM_MODE_CONNECTOR_DisplayPort); | |
| if (ret) | |
| return ret; | |
| drm_connector_helper_add(connector, &ast_dp501_connector_helper_funcs); | |
| connector->interlace_allowed = 0; | |
| connector->doublescan_allowed = 0; | |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; | |
| ast_connector->physical_status = connector->status; | |
| ret = drm_connector_attach_encoder(connector, encoder); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } |