| // SPDX-License-Identifier: GPL-2.0 | |
| // Copyright (c) 2021, ASPEED Technology Inc. | |
| // Authors: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> | |
| #include <linux/firmware.h> | |
| #include <linux/delay.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_state_helper.h> | |
| #include <drm/drm_edid.h> | |
| #include <drm/drm_modeset_helper_vtables.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "ast_drv.h" | |
| #include "ast_vbios.h" | |
| struct ast_astdp_mode_index_table_entry { | |
| unsigned int hdisplay; | |
| unsigned int vdisplay; | |
| unsigned int mode_index; | |
| }; | |
| /* FIXME: Do refresh rate and flags actually matter? */ | |
| static const struct ast_astdp_mode_index_table_entry ast_astdp_mode_index_table[] = { | |
| { 320, 240, ASTDP_320x240_60 }, | |
| { 400, 300, ASTDP_400x300_60 }, | |
| { 512, 384, ASTDP_512x384_60 }, | |
| { 640, 480, ASTDP_640x480_60 }, | |
| { 800, 600, ASTDP_800x600_56 }, | |
| { 1024, 768, ASTDP_1024x768_60 }, | |
| { 1152, 864, ASTDP_1152x864_75 }, | |
| { 1280, 800, ASTDP_1280x800_60_RB }, | |
| { 1280, 1024, ASTDP_1280x1024_60 }, | |
| { 1360, 768, ASTDP_1366x768_60 }, // same as 1366x786 | |
| { 1366, 768, ASTDP_1366x768_60 }, | |
| { 1440, 900, ASTDP_1440x900_60_RB }, | |
| { 1600, 900, ASTDP_1600x900_60_RB }, | |
| { 1600, 1200, ASTDP_1600x1200_60 }, | |
| { 1680, 1050, ASTDP_1680x1050_60_RB }, | |
| { 1920, 1080, ASTDP_1920x1080_60 }, | |
| { 1920, 1200, ASTDP_1920x1200_60 }, | |
| { 0 } | |
| }; | |
| struct ast_astdp_connector_state { | |
| struct drm_connector_state base; | |
| int mode_index; | |
| }; | |
| static struct ast_astdp_connector_state * | |
| to_ast_astdp_connector_state(const struct drm_connector_state *state) | |
| { | |
| return container_of(state, struct ast_astdp_connector_state, base); | |
| } | |
| static int ast_astdp_get_mode_index(unsigned int hdisplay, unsigned int vdisplay) | |
| { | |
| const struct ast_astdp_mode_index_table_entry *entry = ast_astdp_mode_index_table; | |
| while (entry->hdisplay && entry->vdisplay) { | |
| if (entry->hdisplay == hdisplay && entry->vdisplay == vdisplay) | |
| return entry->mode_index; | |
| ++entry; | |
| } | |
| return -EINVAL; | |
| } | |
| static bool ast_astdp_is_connected(struct ast_device *ast) | |
| { | |
| if (!ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xDF, AST_IO_VGACRDF_HPD)) | |
| return false; | |
| /* | |
| * HPD might be set even if no monitor is connected, so also check that | |
| * the link training was successful. | |
| */ | |
| if (!ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xDC, AST_IO_VGACRDC_LINK_SUCCESS)) | |
| return false; | |
| return true; | |
| } | |
| static int ast_astdp_read_edid_block(void *data, u8 *buf, unsigned int block, size_t len) | |
| { | |
| struct ast_device *ast = data; | |
| size_t rdlen = round_up(len, 4); | |
| int ret = 0; | |
| unsigned int i; | |
| if (block > 0) | |
| return -EIO; /* extension headers not supported */ | |
| /* | |
| * Protect access to I/O registers from concurrent modesetting | |
| * by acquiring the I/O-register lock. | |
| */ | |
| mutex_lock(&ast->modeset_lock); | |
| /* Start reading EDID data */ | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xe5, (u8)~AST_IO_VGACRE5_EDID_READ_DONE, 0x00); | |
| for (i = 0; i < rdlen; i += 4) { | |
| unsigned int offset; | |
| unsigned int j; | |
| u8 ediddata[4]; | |
| u8 vgacre4; | |
| offset = (i + block * EDID_LENGTH) / 4; | |
| if (offset >= 64) { | |
| ret = -EIO; | |
| goto out; | |
| } | |
| vgacre4 = offset; | |
| /* | |
| * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64 | |
| */ | |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0xe4, vgacre4); | |
| /* | |
| * CRD7[b0]: valid flag for EDID | |
| * CRD6[b0]: mirror read pointer for EDID | |
| */ | |
| for (j = 0; j < 200; ++j) { | |
| u8 vgacrd7, vgacrd6; | |
| /* | |
| * Delay are getting longer with each retry. | |
| * | |
| * 1. No delay on first try | |
| * 2. The Delays are often 2 loops when users request "Display Settings" | |
| * of right-click of mouse. | |
| * 3. The Delays are often longer a lot when system resume from S3/S4. | |
| */ | |
| if (j) | |
| msleep(j + 1); | |
| /* Wait for EDID offset to show up in mirror register */ | |
| vgacrd7 = ast_get_index_reg(ast, AST_IO_VGACRI, 0xd7); | |
| if (vgacrd7 & AST_IO_VGACRD7_EDID_VALID_FLAG) { | |
| vgacrd6 = ast_get_index_reg(ast, AST_IO_VGACRI, 0xd6); | |
| if (vgacrd6 == offset) | |
| break; | |
| } | |
| } | |
| if (j == 200) { | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| ediddata[0] = ast_get_index_reg(ast, AST_IO_VGACRI, 0xd8); | |
| ediddata[1] = ast_get_index_reg(ast, AST_IO_VGACRI, 0xd9); | |
| ediddata[2] = ast_get_index_reg(ast, AST_IO_VGACRI, 0xda); | |
| ediddata[3] = ast_get_index_reg(ast, AST_IO_VGACRI, 0xdb); | |
| if (i == 31) { | |
| /* | |
| * For 128-bytes EDID_1.3, | |
| * 1. Add the value of Bytes-126 to Bytes-127. | |
| * The Bytes-127 is Checksum. Sum of all 128bytes should | |
| * equal 0 (mod 256). | |
| * 2. Modify Bytes-126 to be 0. | |
| * The Bytes-126 indicates the Number of extensions to | |
| * follow. 0 represents noextensions. | |
| */ | |
| ediddata[3] = ediddata[3] + ediddata[2]; | |
| ediddata[2] = 0; | |
| } | |
| memcpy(buf, ediddata, min((len - i), 4)); | |
| buf += 4; | |
| } | |
| out: | |
| /* Signal end of reading */ | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xe5, (u8)~AST_IO_VGACRE5_EDID_READ_DONE, | |
| AST_IO_VGACRE5_EDID_READ_DONE); | |
| mutex_unlock(&ast->modeset_lock); | |
| return ret; | |
| } | |
| /* | |
| * Launch Aspeed DP | |
| */ | |
| int ast_dp_launch(struct ast_device *ast) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| unsigned int i = 10; | |
| while (i) { | |
| u8 vgacrd1 = ast_get_index_reg(ast, AST_IO_VGACRI, 0xd1); | |
| if (vgacrd1 & AST_IO_VGACRD1_MCU_FW_EXECUTING) | |
| break; | |
| --i; | |
| msleep(100); | |
| } | |
| if (!i) { | |
| drm_err(dev, "Wait DPMCU executing timeout\n"); | |
| return -ENODEV; | |
| } | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xe5, | |
| (u8) ~AST_IO_VGACRE5_EDID_READ_DONE, | |
| AST_IO_VGACRE5_EDID_READ_DONE); | |
| return 0; | |
| } | |
| static bool ast_dp_get_phy_sleep(struct ast_device *ast) | |
| { | |
| u8 vgacre3 = ast_get_index_reg(ast, AST_IO_VGACRI, 0xe3); | |
| return (vgacre3 & AST_IO_VGACRE3_DP_PHY_SLEEP); | |
| } | |
| static void ast_dp_set_phy_sleep(struct ast_device *ast, bool sleep) | |
| { | |
| u8 vgacre3 = 0x00; | |
| if (sleep) | |
| vgacre3 |= AST_IO_VGACRE3_DP_PHY_SLEEP; | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xe3, (u8)~AST_IO_VGACRE3_DP_PHY_SLEEP, | |
| vgacre3); | |
| msleep(50); | |
| } | |
| static void ast_dp_link_training(struct ast_device *ast) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| int i; | |
| for (i = 0; i < 10; i++) { | |
| u8 vgacrdc; | |
| if (i) | |
| msleep(100); | |
| vgacrdc = ast_get_index_reg(ast, AST_IO_VGACRI, 0xdc); | |
| if (vgacrdc & AST_IO_VGACRDC_LINK_SUCCESS) | |
| return; | |
| } | |
| drm_err(dev, "Link training failed\n"); | |
| } | |
| static bool __ast_dp_wait_enable(struct ast_device *ast, bool enabled) | |
| { | |
| u8 vgacrdf_test = 0x00; | |
| u8 vgacrdf; | |
| unsigned int i; | |
| if (enabled) | |
| vgacrdf_test |= AST_IO_VGACRDF_DP_VIDEO_ENABLE; | |
| for (i = 0; i < 1000; ++i) { | |
| if (i) | |
| mdelay(1); | |
| vgacrdf = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xdf, | |
| AST_IO_VGACRDF_DP_VIDEO_ENABLE); | |
| if (vgacrdf == vgacrdf_test) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void ast_dp_set_enable(struct ast_device *ast, bool enabled) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| u8 vgacre3 = 0x00; | |
| if (enabled) | |
| vgacre3 |= AST_IO_VGACRE3_DP_VIDEO_ENABLE; | |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xe3, (u8)~AST_IO_VGACRE3_DP_VIDEO_ENABLE, | |
| vgacre3); | |
| drm_WARN_ON(dev, !__ast_dp_wait_enable(ast, enabled)); | |
| } | |
| static void ast_wait_for_vretrace(struct ast_device *ast) | |
| { | |
| unsigned long timeout = jiffies + HZ; | |
| u8 vgair1; | |
| do { | |
| vgair1 = ast_io_read8(ast, AST_IO_VGAIR1_R); | |
| } while (!(vgair1 & AST_IO_VGAIR1_VREFRESH) && time_before(jiffies, timeout)); | |
| } | |
| /* | |
| * Encoder | |
| */ | |
| static const struct drm_encoder_funcs ast_astdp_encoder_funcs = { | |
| .destroy = drm_encoder_cleanup, | |
| }; | |
| static enum drm_mode_status | |
| ast_astdp_encoder_helper_mode_valid(struct drm_encoder *encoder, | |
| const struct drm_display_mode *mode) | |
| { | |
| int res; | |
| res = ast_astdp_get_mode_index(mode->hdisplay, mode->vdisplay); | |
| if (res < 0) | |
| return MODE_NOMODE; | |
| return MODE_OK; | |
| } | |
| static void ast_astdp_encoder_helper_atomic_mode_set(struct drm_encoder *encoder, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| struct ast_device *ast = to_ast_device(dev); | |
| struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state); | |
| const struct ast_vbios_enhtable *vmode = ast_crtc_state->vmode; | |
| struct ast_astdp_connector_state *astdp_conn_state = | |
| to_ast_astdp_connector_state(conn_state); | |
| int mode_index = astdp_conn_state->mode_index; | |
| u8 refresh_rate_index; | |
| u8 vgacre0, vgacre1, vgacre2; | |
| if (drm_WARN_ON(dev, vmode->refresh_rate_index < 1 || vmode->refresh_rate_index > 255)) | |
| return; | |
| refresh_rate_index = vmode->refresh_rate_index - 1; | |
| /* FIXME: Why are we doing this? */ | |
| switch (mode_index) { | |
| case ASTDP_1280x800_60_RB: | |
| case ASTDP_1440x900_60_RB: | |
| case ASTDP_1600x900_60_RB: | |
| case ASTDP_1680x1050_60_RB: | |
| mode_index = (u8)(mode_index - (u8)refresh_rate_index); | |
| break; | |
| default: | |
| mode_index = (u8)(mode_index + (u8)refresh_rate_index); | |
| break; | |
| } | |
| /* | |
| * CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp) | |
| * CRE1[7:0]: MISC1 (default: 0x00) | |
| * CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50) | |
| */ | |
| vgacre0 = AST_IO_VGACRE0_24BPP; | |
| vgacre1 = 0x00; | |
| vgacre2 = mode_index & 0xff; | |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0xe0, vgacre0); | |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0xe1, vgacre1); | |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0xe2, vgacre2); | |
| } | |
| static void ast_astdp_encoder_helper_atomic_enable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct ast_device *ast = to_ast_device(encoder->dev); | |
| struct ast_connector *ast_connector = &ast->output.astdp.connector; | |
| if (ast_connector->physical_status == connector_status_connected) { | |
| ast_dp_set_phy_sleep(ast, false); | |
| ast_dp_link_training(ast); | |
| ast_wait_for_vretrace(ast); | |
| ast_dp_set_enable(ast, true); | |
| } | |
| } | |
| static void ast_astdp_encoder_helper_atomic_disable(struct drm_encoder *encoder, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct ast_device *ast = to_ast_device(encoder->dev); | |
| ast_dp_set_enable(ast, false); | |
| ast_dp_set_phy_sleep(ast, true); | |
| } | |
| static int ast_astdp_encoder_helper_atomic_check(struct drm_encoder *encoder, | |
| struct drm_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| const struct drm_display_mode *mode = &crtc_state->mode; | |
| struct ast_astdp_connector_state *astdp_conn_state = | |
| to_ast_astdp_connector_state(conn_state); | |
| int res; | |
| if (drm_atomic_crtc_needs_modeset(crtc_state)) { | |
| res = ast_astdp_get_mode_index(mode->hdisplay, mode->vdisplay); | |
| if (res < 0) | |
| return res; | |
| astdp_conn_state->mode_index = res; | |
| } | |
| return 0; | |
| } | |
| static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = { | |
| .mode_valid = ast_astdp_encoder_helper_mode_valid, | |
| .atomic_mode_set = ast_astdp_encoder_helper_atomic_mode_set, | |
| .atomic_enable = ast_astdp_encoder_helper_atomic_enable, | |
| .atomic_disable = ast_astdp_encoder_helper_atomic_disable, | |
| .atomic_check = ast_astdp_encoder_helper_atomic_check, | |
| }; | |
| /* | |
| * Connector | |
| */ | |
| static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector) | |
| { | |
| struct ast_connector *ast_connector = to_ast_connector(connector); | |
| int count; | |
| if (ast_connector->physical_status == connector_status_connected) { | |
| struct ast_device *ast = to_ast_device(connector->dev); | |
| const struct drm_edid *drm_edid; | |
| drm_edid = drm_edid_read_custom(connector, ast_astdp_read_edid_block, ast); | |
| drm_edid_connector_update(connector, drm_edid); | |
| count = drm_edid_connector_add_modes(connector); | |
| drm_edid_free(drm_edid); | |
| } else { | |
| drm_edid_connector_update(connector, NULL); | |
| /* | |
| * There's no EDID data without a connected monitor. Set BMC- | |
| * compatible modes in this case. The XGA default resolution | |
| * should work well for all BMCs. | |
| */ | |
| count = drm_add_modes_noedid(connector, 4096, 4096); | |
| if (count) | |
| drm_set_preferred_mode(connector, 1024, 768); | |
| } | |
| return count; | |
| } | |
| static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connector, | |
| struct drm_modeset_acquire_ctx *ctx, | |
| bool force) | |
| { | |
| struct ast_connector *ast_connector = to_ast_connector(connector); | |
| struct ast_device *ast = to_ast_device(connector->dev); | |
| enum drm_connector_status status = connector_status_disconnected; | |
| bool phy_sleep; | |
| mutex_lock(&ast->modeset_lock); | |
| phy_sleep = ast_dp_get_phy_sleep(ast); | |
| if (phy_sleep) | |
| ast_dp_set_phy_sleep(ast, false); | |
| if (ast_astdp_is_connected(ast)) | |
| status = connector_status_connected; | |
| if (phy_sleep && status == connector_status_disconnected) | |
| ast_dp_set_phy_sleep(ast, true); | |
| mutex_unlock(&ast->modeset_lock); | |
| if (status != ast_connector->physical_status) | |
| ++connector->epoch_counter; | |
| ast_connector->physical_status = status; | |
| return connector_status_connected; | |
| } | |
| static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs = { | |
| .get_modes = ast_astdp_connector_helper_get_modes, | |
| .detect_ctx = ast_astdp_connector_helper_detect_ctx, | |
| }; | |
| static void ast_astdp_connector_reset(struct drm_connector *connector) | |
| { | |
| struct ast_astdp_connector_state *astdp_state = kzalloc_obj(*astdp_state); | |
| if (connector->state) | |
| connector->funcs->atomic_destroy_state(connector, connector->state); | |
| if (astdp_state) | |
| __drm_atomic_helper_connector_reset(connector, &astdp_state->base); | |
| else | |
| __drm_atomic_helper_connector_reset(connector, NULL); | |
| } | |
| static struct drm_connector_state * | |
| ast_astdp_connector_atomic_duplicate_state(struct drm_connector *connector) | |
| { | |
| struct ast_astdp_connector_state *new_astdp_state, *astdp_state; | |
| struct drm_device *dev = connector->dev; | |
| if (drm_WARN_ON(dev, !connector->state)) | |
| return NULL; | |
| new_astdp_state = kmalloc_obj(*new_astdp_state); | |
| if (!new_astdp_state) | |
| return NULL; | |
| __drm_atomic_helper_connector_duplicate_state(connector, &new_astdp_state->base); | |
| astdp_state = to_ast_astdp_connector_state(connector->state); | |
| new_astdp_state->mode_index = astdp_state->mode_index; | |
| return &new_astdp_state->base; | |
| } | |
| static void ast_astdp_connector_atomic_destroy_state(struct drm_connector *connector, | |
| struct drm_connector_state *state) | |
| { | |
| struct ast_astdp_connector_state *astdp_state = to_ast_astdp_connector_state(state); | |
| __drm_atomic_helper_connector_destroy_state(&astdp_state->base); | |
| kfree(astdp_state); | |
| } | |
| static const struct drm_connector_funcs ast_astdp_connector_funcs = { | |
| .reset = ast_astdp_connector_reset, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .destroy = drm_connector_cleanup, | |
| .atomic_duplicate_state = ast_astdp_connector_atomic_duplicate_state, | |
| .atomic_destroy_state = ast_astdp_connector_atomic_destroy_state, | |
| }; | |
| /* | |
| * Output | |
| */ | |
| int ast_astdp_output_init(struct ast_device *ast) | |
| { | |
| struct drm_device *dev = &ast->base; | |
| struct drm_crtc *crtc = &ast->crtc; | |
| struct drm_encoder *encoder; | |
| struct ast_connector *ast_connector; | |
| struct drm_connector *connector; | |
| int ret; | |
| /* encoder */ | |
| encoder = &ast->output.astdp.encoder; | |
| ret = drm_encoder_init(dev, encoder, &ast_astdp_encoder_funcs, | |
| DRM_MODE_ENCODER_TMDS, NULL); | |
| if (ret) | |
| return ret; | |
| drm_encoder_helper_add(encoder, &ast_astdp_encoder_helper_funcs); | |
| encoder->possible_crtcs = drm_crtc_mask(crtc); | |
| /* connector */ | |
| ast_connector = &ast->output.astdp.connector; | |
| connector = &ast_connector->base; | |
| ret = drm_connector_init(dev, connector, &ast_astdp_connector_funcs, | |
| DRM_MODE_CONNECTOR_DisplayPort); | |
| if (ret) | |
| return ret; | |
| drm_connector_helper_add(connector, &ast_astdp_connector_helper_funcs); | |
| connector->interlace_allowed = 0; | |
| connector->doublescan_allowed = 0; | |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; | |
| ast_connector->physical_status = connector->status; | |
| ret = drm_connector_attach_encoder(connector, encoder); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } |