| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012 Russell King | |
| * Rewritten from the dovefb driver, and Armada510 manuals. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/component.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include <drm/drm_vblank.h> | |
| #include "armada_crtc.h" | |
| #include "armada_drm.h" | |
| #include "armada_fb.h" | |
| #include "armada_gem.h" | |
| #include "armada_hw.h" | |
| #include "armada_plane.h" | |
| #include "armada_trace.h" | |
| /* | |
| * A note about interlacing. Let's consider HDMI 1920x1080i. | |
| * The timing parameters we have from X are: | |
| * Hact HsyA HsyI Htot Vact VsyA VsyI Vtot | |
| * 1920 2448 2492 2640 1080 1084 1094 1125 | |
| * Which get translated to: | |
| * Hact HsyA HsyI Htot Vact VsyA VsyI Vtot | |
| * 1920 2448 2492 2640 540 542 547 562 | |
| * | |
| * This is how it is defined by CEA-861-D - line and pixel numbers are | |
| * referenced to the rising edge of VSYNC and HSYNC. Total clocks per | |
| * line: 2640. The odd frame, the first active line is at line 21, and | |
| * the even frame, the first active line is 584. | |
| * | |
| * LN: 560 561 562 563 567 568 569 | |
| * DE: ~~~|____________________________//__________________________ | |
| * HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____ | |
| * VSYNC: _________________________|~~~~~~//~~~~~~~~~~~~~~~|__________ | |
| * 22 blanking lines. VSYNC at 1320 (referenced to the HSYNC rising edge). | |
| * | |
| * LN: 1123 1124 1125 1 5 6 7 | |
| * DE: ~~~|____________________________//__________________________ | |
| * HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____ | |
| * VSYNC: ____________________|~~~~~~~~~~~//~~~~~~~~~~|_______________ | |
| * 23 blanking lines | |
| * | |
| * The Armada LCD Controller line and pixel numbers are, like X timings, | |
| * referenced to the top left of the active frame. | |
| * | |
| * So, translating these to our LCD controller: | |
| * Odd frame, 563 total lines, VSYNC at line 543-548, pixel 1128. | |
| * Even frame, 562 total lines, VSYNC at line 542-547, pixel 2448. | |
| * Note: Vsync front porch remains constant! | |
| * | |
| * if (odd_frame) { | |
| * vtotal = mode->crtc_vtotal + 1; | |
| * vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay + 1; | |
| * vhorizpos = mode->crtc_hsync_start - mode->crtc_htotal / 2 | |
| * } else { | |
| * vtotal = mode->crtc_vtotal; | |
| * vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay; | |
| * vhorizpos = mode->crtc_hsync_start; | |
| * } | |
| * vfrontporch = mode->crtc_vtotal - mode->crtc_vsync_end; | |
| * | |
| * So, we need to reprogram these registers on each vsync event: | |
| * LCD_SPU_V_PORCH, LCD_SPU_ADV_REG, LCD_SPUT_V_H_TOTAL | |
| * | |
| * Note: we do not use the frame done interrupts because these appear | |
| * to happen too early, and lead to jitter on the display (presumably | |
| * they occur at the end of the last active line, before the vsync back | |
| * porch, which we're reprogramming.) | |
| */ | |
| void | |
| armada_drm_crtc_update_regs(struct armada_crtc *dcrtc, struct armada_regs *regs) | |
| { | |
| while (regs->offset != ~0) { | |
| void __iomem *reg = dcrtc->base + regs->offset; | |
| uint32_t val; | |
| val = regs->mask; | |
| if (val != 0) | |
| val &= readl_relaxed(reg); | |
| writel_relaxed(val | regs->val, reg); | |
| ++regs; | |
| } | |
| } | |
| static void armada_drm_crtc_update(struct armada_crtc *dcrtc, bool enable) | |
| { | |
| uint32_t dumb_ctrl; | |
| dumb_ctrl = dcrtc->cfg_dumb_ctrl; | |
| if (enable) | |
| dumb_ctrl |= CFG_DUMB_ENA; | |
| /* | |
| * When the dumb interface isn't in DUMB24_RGB888_0 mode, it might | |
| * be using SPI or GPIO. If we set this to DUMB_BLANK, we will | |
| * force LCD_D[23:0] to output blank color, overriding the GPIO or | |
| * SPI usage. So leave it as-is unless in DUMB24_RGB888_0 mode. | |
| */ | |
| if (!enable && (dumb_ctrl & DUMB_MASK) == DUMB24_RGB888_0) { | |
| dumb_ctrl &= ~DUMB_MASK; | |
| dumb_ctrl |= DUMB_BLANK; | |
| } | |
| armada_updatel(dumb_ctrl, | |
| ~(CFG_INV_CSYNC | CFG_INV_HSYNC | CFG_INV_VSYNC), | |
| dcrtc->base + LCD_SPU_DUMB_CTRL); | |
| } | |
| static void armada_drm_crtc_queue_state_event(struct drm_crtc *crtc) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| struct drm_pending_vblank_event *event; | |
| /* If we have an event, we need vblank events enabled */ | |
| event = xchg(&crtc->state->event, NULL); | |
| if (event) { | |
| WARN_ON(drm_crtc_vblank_get(crtc) != 0); | |
| dcrtc->event = event; | |
| } | |
| } | |
| static void armada_drm_update_gamma(struct drm_crtc *crtc) | |
| { | |
| struct drm_property_blob *blob = crtc->state->gamma_lut; | |
| void __iomem *base = drm_to_armada_crtc(crtc)->base; | |
| int i; | |
| if (blob) { | |
| struct drm_color_lut *lut = blob->data; | |
| armada_updatel(CFG_CSB_256x8, CFG_CSB_256x8 | CFG_PDWN256x8, | |
| base + LCD_SPU_SRAM_PARA1); | |
| for (i = 0; i < 256; i++) { | |
| writel_relaxed(drm_color_lut_extract(lut[i].red, 8), | |
| base + LCD_SPU_SRAM_WRDAT); | |
| writel_relaxed(i | SRAM_WRITE | SRAM_GAMMA_YR, | |
| base + LCD_SPU_SRAM_CTRL); | |
| readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN); | |
| writel_relaxed(drm_color_lut_extract(lut[i].green, 8), | |
| base + LCD_SPU_SRAM_WRDAT); | |
| writel_relaxed(i | SRAM_WRITE | SRAM_GAMMA_UG, | |
| base + LCD_SPU_SRAM_CTRL); | |
| readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN); | |
| writel_relaxed(drm_color_lut_extract(lut[i].blue, 8), | |
| base + LCD_SPU_SRAM_WRDAT); | |
| writel_relaxed(i | SRAM_WRITE | SRAM_GAMMA_VB, | |
| base + LCD_SPU_SRAM_CTRL); | |
| readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN); | |
| } | |
| armada_updatel(CFG_GAMMA_ENA, CFG_GAMMA_ENA, | |
| base + LCD_SPU_DMA_CTRL0); | |
| } else { | |
| armada_updatel(0, CFG_GAMMA_ENA, base + LCD_SPU_DMA_CTRL0); | |
| armada_updatel(CFG_PDWN256x8, CFG_CSB_256x8 | CFG_PDWN256x8, | |
| base + LCD_SPU_SRAM_PARA1); | |
| } | |
| } | |
| static enum drm_mode_status armada_drm_crtc_mode_valid(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| if (mode->vscan > 1) | |
| return MODE_NO_VSCAN; | |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) | |
| return MODE_NO_DBLESCAN; | |
| if (mode->flags & DRM_MODE_FLAG_HSKEW) | |
| return MODE_H_ILLEGAL; | |
| /* We can't do interlaced modes if we don't have the SPU_ADV_REG */ | |
| if (!dcrtc->variant->has_spu_adv_reg && | |
| mode->flags & DRM_MODE_FLAG_INTERLACE) | |
| return MODE_NO_INTERLACE; | |
| if (mode->flags & (DRM_MODE_FLAG_BCAST | DRM_MODE_FLAG_PIXMUX | | |
| DRM_MODE_FLAG_CLKDIV2)) | |
| return MODE_BAD; | |
| return MODE_OK; | |
| } | |
| /* The mode_config.mutex will be held for this call */ | |
| static bool armada_drm_crtc_mode_fixup(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode, struct drm_display_mode *adj) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| int ret; | |
| /* | |
| * Set CRTC modesetting parameters for the adjusted mode. This is | |
| * applied after the connectors, bridges, and encoders have fixed up | |
| * this mode, as described above drm_atomic_helper_check_modeset(). | |
| */ | |
| drm_mode_set_crtcinfo(adj, CRTC_INTERLACE_HALVE_V); | |
| /* | |
| * Validate the adjusted mode in case an encoder/bridge has set | |
| * something we don't support. | |
| */ | |
| if (armada_drm_crtc_mode_valid(crtc, adj) != MODE_OK) | |
| return false; | |
| /* Check whether the display mode is possible */ | |
| ret = dcrtc->variant->compute_clock(dcrtc, adj, NULL); | |
| if (ret) | |
| return false; | |
| return true; | |
| } | |
| /* These are locked by dev->vbl_lock */ | |
| static void armada_drm_crtc_disable_irq(struct armada_crtc *dcrtc, u32 mask) | |
| { | |
| if (dcrtc->irq_ena & mask) { | |
| dcrtc->irq_ena &= ~mask; | |
| writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); | |
| } | |
| } | |
| static void armada_drm_crtc_enable_irq(struct armada_crtc *dcrtc, u32 mask) | |
| { | |
| if ((dcrtc->irq_ena & mask) != mask) { | |
| dcrtc->irq_ena |= mask; | |
| writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); | |
| if (readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR) & mask) | |
| writel(0, dcrtc->base + LCD_SPU_IRQ_ISR); | |
| } | |
| } | |
| static void armada_drm_crtc_irq(struct armada_crtc *dcrtc, u32 stat) | |
| { | |
| struct drm_pending_vblank_event *event; | |
| void __iomem *base = dcrtc->base; | |
| if (stat & DMA_FF_UNDERFLOW) | |
| DRM_ERROR("video underflow on crtc %u\n", dcrtc->num); | |
| if (stat & GRA_FF_UNDERFLOW) | |
| DRM_ERROR("graphics underflow on crtc %u\n", dcrtc->num); | |
| if (stat & VSYNC_IRQ) | |
| drm_crtc_handle_vblank(&dcrtc->crtc); | |
| spin_lock(&dcrtc->irq_lock); | |
| if (stat & GRA_FRAME_IRQ && dcrtc->interlaced) { | |
| int i = stat & GRA_FRAME_IRQ0 ? 0 : 1; | |
| uint32_t val; | |
| writel_relaxed(dcrtc->v[i].spu_v_porch, base + LCD_SPU_V_PORCH); | |
| writel_relaxed(dcrtc->v[i].spu_v_h_total, | |
| base + LCD_SPUT_V_H_TOTAL); | |
| val = readl_relaxed(base + LCD_SPU_ADV_REG); | |
| val &= ~(ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF | ADV_VSYNCOFFEN); | |
| val |= dcrtc->v[i].spu_adv_reg; | |
| writel_relaxed(val, base + LCD_SPU_ADV_REG); | |
| } | |
| if (stat & dcrtc->irq_ena & DUMB_FRAMEDONE) { | |
| if (dcrtc->update_pending) { | |
| armada_drm_crtc_update_regs(dcrtc, dcrtc->regs); | |
| dcrtc->update_pending = false; | |
| } | |
| if (dcrtc->cursor_update) { | |
| writel_relaxed(dcrtc->cursor_hw_pos, | |
| base + LCD_SPU_HWC_OVSA_HPXL_VLN); | |
| writel_relaxed(dcrtc->cursor_hw_sz, | |
| base + LCD_SPU_HWC_HPXL_VLN); | |
| armada_updatel(CFG_HWC_ENA, | |
| CFG_HWC_ENA | CFG_HWC_1BITMOD | | |
| CFG_HWC_1BITENA, | |
| base + LCD_SPU_DMA_CTRL0); | |
| dcrtc->cursor_update = false; | |
| } | |
| armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA); | |
| } | |
| spin_unlock(&dcrtc->irq_lock); | |
| if (stat & VSYNC_IRQ && !dcrtc->update_pending) { | |
| event = xchg(&dcrtc->event, NULL); | |
| if (event) { | |
| spin_lock(&dcrtc->crtc.dev->event_lock); | |
| drm_crtc_send_vblank_event(&dcrtc->crtc, event); | |
| spin_unlock(&dcrtc->crtc.dev->event_lock); | |
| drm_crtc_vblank_put(&dcrtc->crtc); | |
| } | |
| } | |
| } | |
| static irqreturn_t armada_drm_irq(int irq, void *arg) | |
| { | |
| struct armada_crtc *dcrtc = arg; | |
| u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); | |
| /* | |
| * Reading the ISR appears to clear bits provided CLEAN_SPU_IRQ_ISR | |
| * is set. Writing has some other effect to acknowledge the IRQ - | |
| * without this, we only get a single IRQ. | |
| */ | |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); | |
| trace_armada_drm_irq(&dcrtc->crtc, stat); | |
| /* Mask out those interrupts we haven't enabled */ | |
| v = stat & dcrtc->irq_ena; | |
| if (v & (VSYNC_IRQ|GRA_FRAME_IRQ|DUMB_FRAMEDONE)) { | |
| armada_drm_crtc_irq(dcrtc, stat); | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| /* The mode_config.mutex will be held for this call */ | |
| static void armada_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) | |
| { | |
| struct drm_display_mode *adj = &crtc->state->adjusted_mode; | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| struct armada_regs regs[17]; | |
| uint32_t lm, rm, tm, bm, val, sclk; | |
| unsigned long flags; | |
| unsigned i; | |
| bool interlaced = !!(adj->flags & DRM_MODE_FLAG_INTERLACE); | |
| i = 0; | |
| rm = adj->crtc_hsync_start - adj->crtc_hdisplay; | |
| lm = adj->crtc_htotal - adj->crtc_hsync_end; | |
| bm = adj->crtc_vsync_start - adj->crtc_vdisplay; | |
| tm = adj->crtc_vtotal - adj->crtc_vsync_end; | |
| DRM_DEBUG_KMS("[CRTC:%d:%s] mode " DRM_MODE_FMT "\n", | |
| crtc->base.id, crtc->name, DRM_MODE_ARG(adj)); | |
| DRM_DEBUG_KMS("lm %d rm %d tm %d bm %d\n", lm, rm, tm, bm); | |
| /* Now compute the divider for real */ | |
| dcrtc->variant->compute_clock(dcrtc, adj, &sclk); | |
| armada_reg_queue_set(regs, i, sclk, LCD_CFG_SCLK_DIV); | |
| spin_lock_irqsave(&dcrtc->irq_lock, flags); | |
| dcrtc->interlaced = interlaced; | |
| /* Even interlaced/progressive frame */ | |
| dcrtc->v[1].spu_v_h_total = adj->crtc_vtotal << 16 | | |
| adj->crtc_htotal; | |
| dcrtc->v[1].spu_v_porch = tm << 16 | bm; | |
| val = adj->crtc_hsync_start; | |
| dcrtc->v[1].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN; | |
| if (interlaced) { | |
| /* Odd interlaced frame */ | |
| val -= adj->crtc_htotal / 2; | |
| dcrtc->v[0].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN; | |
| dcrtc->v[0].spu_v_h_total = dcrtc->v[1].spu_v_h_total + | |
| (1 << 16); | |
| dcrtc->v[0].spu_v_porch = dcrtc->v[1].spu_v_porch + 1; | |
| } else { | |
| dcrtc->v[0] = dcrtc->v[1]; | |
| } | |
| val = adj->crtc_vdisplay << 16 | adj->crtc_hdisplay; | |
| armada_reg_queue_set(regs, i, val, LCD_SPU_V_H_ACTIVE); | |
| armada_reg_queue_set(regs, i, (lm << 16) | rm, LCD_SPU_H_PORCH); | |
| armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_porch, LCD_SPU_V_PORCH); | |
| armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_h_total, | |
| LCD_SPUT_V_H_TOTAL); | |
| if (dcrtc->variant->has_spu_adv_reg) | |
| armada_reg_queue_mod(regs, i, dcrtc->v[0].spu_adv_reg, | |
| ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF | | |
| ADV_VSYNCOFFEN, LCD_SPU_ADV_REG); | |
| val = adj->flags & DRM_MODE_FLAG_NVSYNC ? CFG_VSYNC_INV : 0; | |
| armada_reg_queue_mod(regs, i, val, CFG_VSYNC_INV, LCD_SPU_DMA_CTRL1); | |
| /* | |
| * The documentation doesn't indicate what the normal state of | |
| * the sync signals are. Sebastian Hesselbart kindly probed | |
| * these signals on his board to determine their state. | |
| * | |
| * The non-inverted state of the sync signals is active high. | |
| * Setting these bits makes the appropriate signal active low. | |
| */ | |
| val = 0; | |
| if (adj->flags & DRM_MODE_FLAG_NCSYNC) | |
| val |= CFG_INV_CSYNC; | |
| if (adj->flags & DRM_MODE_FLAG_NHSYNC) | |
| val |= CFG_INV_HSYNC; | |
| if (adj->flags & DRM_MODE_FLAG_NVSYNC) | |
| val |= CFG_INV_VSYNC; | |
| armada_reg_queue_mod(regs, i, val, CFG_INV_CSYNC | CFG_INV_HSYNC | | |
| CFG_INV_VSYNC, LCD_SPU_DUMB_CTRL); | |
| armada_reg_queue_end(regs, i); | |
| armada_drm_crtc_update_regs(dcrtc, regs); | |
| spin_unlock_irqrestore(&dcrtc->irq_lock, flags); | |
| } | |
| static int armada_drm_crtc_atomic_check(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, | |
| crtc); | |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); | |
| if (crtc_state->gamma_lut && drm_color_lut_size(crtc_state->gamma_lut) != 256) | |
| return -EINVAL; | |
| if (crtc_state->color_mgmt_changed) | |
| crtc_state->planes_changed = true; | |
| return 0; | |
| } | |
| static void armada_drm_crtc_atomic_begin(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, | |
| crtc); | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); | |
| if (crtc_state->color_mgmt_changed) | |
| armada_drm_update_gamma(crtc); | |
| dcrtc->regs_idx = 0; | |
| dcrtc->regs = dcrtc->atomic_regs; | |
| } | |
| static void armada_drm_crtc_atomic_flush(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, | |
| crtc); | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); | |
| armada_reg_queue_end(dcrtc->regs, dcrtc->regs_idx); | |
| /* | |
| * If we aren't doing a full modeset, then we need to queue | |
| * the event here. | |
| */ | |
| if (!drm_atomic_crtc_needs_modeset(crtc_state)) { | |
| dcrtc->update_pending = true; | |
| armada_drm_crtc_queue_state_event(crtc); | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| armada_drm_crtc_enable_irq(dcrtc, DUMB_FRAMEDONE_ENA); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| } else { | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| armada_drm_crtc_update_regs(dcrtc, dcrtc->regs); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| } | |
| } | |
| static void armada_drm_crtc_atomic_disable(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, | |
| crtc); | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| struct drm_pending_vblank_event *event; | |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); | |
| if (old_state->adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) | |
| drm_crtc_vblank_put(crtc); | |
| drm_crtc_vblank_off(crtc); | |
| armada_drm_crtc_update(dcrtc, false); | |
| if (!crtc->state->active) { | |
| /* | |
| * This modeset will be leaving the CRTC disabled, so | |
| * call the backend to disable upstream clocks etc. | |
| */ | |
| if (dcrtc->variant->disable) | |
| dcrtc->variant->disable(dcrtc); | |
| /* | |
| * We will not receive any further vblank events. | |
| * Send the flip_done event manually. | |
| */ | |
| event = crtc->state->event; | |
| crtc->state->event = NULL; | |
| if (event) { | |
| spin_lock_irq(&crtc->dev->event_lock); | |
| drm_crtc_send_vblank_event(crtc, event); | |
| spin_unlock_irq(&crtc->dev->event_lock); | |
| } | |
| } | |
| } | |
| static void armada_drm_crtc_atomic_enable(struct drm_crtc *crtc, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, | |
| crtc); | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); | |
| if (!old_state->active) { | |
| /* | |
| * This modeset is enabling the CRTC after it having | |
| * been disabled. Reverse the call to ->disable in | |
| * the atomic_disable(). | |
| */ | |
| if (dcrtc->variant->enable) | |
| dcrtc->variant->enable(dcrtc, &crtc->state->adjusted_mode); | |
| } | |
| armada_drm_crtc_update(dcrtc, true); | |
| drm_crtc_vblank_on(crtc); | |
| if (crtc->state->adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) | |
| WARN_ON(drm_crtc_vblank_get(crtc)); | |
| armada_drm_crtc_queue_state_event(crtc); | |
| } | |
| static const struct drm_crtc_helper_funcs armada_crtc_helper_funcs = { | |
| .mode_valid = armada_drm_crtc_mode_valid, | |
| .mode_fixup = armada_drm_crtc_mode_fixup, | |
| .mode_set_nofb = armada_drm_crtc_mode_set_nofb, | |
| .atomic_check = armada_drm_crtc_atomic_check, | |
| .atomic_begin = armada_drm_crtc_atomic_begin, | |
| .atomic_flush = armada_drm_crtc_atomic_flush, | |
| .atomic_disable = armada_drm_crtc_atomic_disable, | |
| .atomic_enable = armada_drm_crtc_atomic_enable, | |
| }; | |
| static void armada_load_cursor_argb(void __iomem *base, uint32_t *pix, | |
| unsigned stride, unsigned width, unsigned height) | |
| { | |
| uint32_t addr; | |
| unsigned y; | |
| addr = SRAM_HWC32_RAM1; | |
| for (y = 0; y < height; y++) { | |
| uint32_t *p = &pix[y * stride]; | |
| unsigned x; | |
| for (x = 0; x < width; x++, p++) { | |
| uint32_t val = *p; | |
| /* | |
| * In "ARGB888" (HWC32) mode, writing to the SRAM | |
| * requires these bits to contain: | |
| * 31:24 = alpha 23:16 = blue 15:8 = green 7:0 = red | |
| * So, it's actually ABGR8888. This is independent | |
| * of the SWAPRB bits in DMA control register 0. | |
| */ | |
| val = (val & 0xff00ff00) | | |
| (val & 0x000000ff) << 16 | | |
| (val & 0x00ff0000) >> 16; | |
| writel_relaxed(val, | |
| base + LCD_SPU_SRAM_WRDAT); | |
| writel_relaxed(addr | SRAM_WRITE, | |
| base + LCD_SPU_SRAM_CTRL); | |
| readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN); | |
| addr += 1; | |
| if ((addr & 0x00ff) == 0) | |
| addr += 0xf00; | |
| if ((addr & 0x30ff) == 0) | |
| addr = SRAM_HWC32_RAM2; | |
| } | |
| } | |
| } | |
| static void armada_drm_crtc_cursor_tran(void __iomem *base) | |
| { | |
| unsigned addr; | |
| for (addr = 0; addr < 256; addr++) { | |
| /* write the default value */ | |
| writel_relaxed(0x55555555, base + LCD_SPU_SRAM_WRDAT); | |
| writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_TRAN, | |
| base + LCD_SPU_SRAM_CTRL); | |
| } | |
| } | |
| static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload) | |
| { | |
| uint32_t xoff, xscr, w = dcrtc->cursor_w, s; | |
| uint32_t yoff, yscr, h = dcrtc->cursor_h; | |
| uint32_t para1; | |
| /* | |
| * Calculate the visible width and height of the cursor, | |
| * screen position, and the position in the cursor bitmap. | |
| */ | |
| if (dcrtc->cursor_x < 0) { | |
| xoff = -dcrtc->cursor_x; | |
| xscr = 0; | |
| w -= min(xoff, w); | |
| } else if (dcrtc->cursor_x + w > dcrtc->crtc.mode.hdisplay) { | |
| xoff = 0; | |
| xscr = dcrtc->cursor_x; | |
| w = max_t(int, dcrtc->crtc.mode.hdisplay - dcrtc->cursor_x, 0); | |
| } else { | |
| xoff = 0; | |
| xscr = dcrtc->cursor_x; | |
| } | |
| if (dcrtc->cursor_y < 0) { | |
| yoff = -dcrtc->cursor_y; | |
| yscr = 0; | |
| h -= min(yoff, h); | |
| } else if (dcrtc->cursor_y + h > dcrtc->crtc.mode.vdisplay) { | |
| yoff = 0; | |
| yscr = dcrtc->cursor_y; | |
| h = max_t(int, dcrtc->crtc.mode.vdisplay - dcrtc->cursor_y, 0); | |
| } else { | |
| yoff = 0; | |
| yscr = dcrtc->cursor_y; | |
| } | |
| /* On interlaced modes, the vertical cursor size must be halved */ | |
| s = dcrtc->cursor_w; | |
| if (dcrtc->interlaced) { | |
| s *= 2; | |
| yscr /= 2; | |
| h /= 2; | |
| } | |
| if (!dcrtc->cursor_obj || !h || !w) { | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| dcrtc->cursor_update = false; | |
| armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| return 0; | |
| } | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| para1 = readl_relaxed(dcrtc->base + LCD_SPU_SRAM_PARA1); | |
| armada_updatel(CFG_CSB_256x32, CFG_CSB_256x32 | CFG_PDWN256x32, | |
| dcrtc->base + LCD_SPU_SRAM_PARA1); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| /* | |
| * Initialize the transparency if the SRAM was powered down. | |
| * We must also reload the cursor data as well. | |
| */ | |
| if (!(para1 & CFG_CSB_256x32)) { | |
| armada_drm_crtc_cursor_tran(dcrtc->base); | |
| reload = true; | |
| } | |
| if (dcrtc->cursor_hw_sz != (h << 16 | w)) { | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| dcrtc->cursor_update = false; | |
| armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| reload = true; | |
| } | |
| if (reload) { | |
| struct armada_gem_object *obj = dcrtc->cursor_obj; | |
| uint32_t *pix; | |
| /* Set the top-left corner of the cursor image */ | |
| pix = obj->addr; | |
| pix += yoff * s + xoff; | |
| armada_load_cursor_argb(dcrtc->base, pix, s, w, h); | |
| } | |
| /* Reload the cursor position, size and enable in the IRQ handler */ | |
| spin_lock_irq(&dcrtc->irq_lock); | |
| dcrtc->cursor_hw_pos = yscr << 16 | xscr; | |
| dcrtc->cursor_hw_sz = h << 16 | w; | |
| dcrtc->cursor_update = true; | |
| armada_drm_crtc_enable_irq(dcrtc, DUMB_FRAMEDONE_ENA); | |
| spin_unlock_irq(&dcrtc->irq_lock); | |
| return 0; | |
| } | |
| static void cursor_update(void *data) | |
| { | |
| armada_drm_crtc_cursor_update(data, true); | |
| } | |
| static int armada_drm_crtc_cursor_set(struct drm_crtc *crtc, | |
| struct drm_file *file, uint32_t handle, uint32_t w, uint32_t h) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| struct armada_gem_object *obj = NULL; | |
| int ret; | |
| /* If no cursor support, replicate drm's return value */ | |
| if (!dcrtc->variant->has_spu_adv_reg) | |
| return -ENXIO; | |
| if (handle && w > 0 && h > 0) { | |
| /* maximum size is 64x32 or 32x64 */ | |
| if (w > 64 || h > 64 || (w > 32 && h > 32)) | |
| return -ENOMEM; | |
| obj = armada_gem_object_lookup(file, handle); | |
| if (!obj) | |
| return -ENOENT; | |
| /* Must be a kernel-mapped object */ | |
| if (!obj->addr) { | |
| drm_gem_object_put(&obj->obj); | |
| return -EINVAL; | |
| } | |
| if (obj->obj.size < w * h * 4) { | |
| DRM_ERROR("buffer is too small\n"); | |
| drm_gem_object_put(&obj->obj); | |
| return -ENOMEM; | |
| } | |
| } | |
| if (dcrtc->cursor_obj) { | |
| dcrtc->cursor_obj->update = NULL; | |
| dcrtc->cursor_obj->update_data = NULL; | |
| drm_gem_object_put(&dcrtc->cursor_obj->obj); | |
| } | |
| dcrtc->cursor_obj = obj; | |
| dcrtc->cursor_w = w; | |
| dcrtc->cursor_h = h; | |
| ret = armada_drm_crtc_cursor_update(dcrtc, true); | |
| if (obj) { | |
| obj->update_data = dcrtc; | |
| obj->update = cursor_update; | |
| } | |
| return ret; | |
| } | |
| static int armada_drm_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| int ret; | |
| /* If no cursor support, replicate drm's return value */ | |
| if (!dcrtc->variant->has_spu_adv_reg) | |
| return -EFAULT; | |
| dcrtc->cursor_x = x; | |
| dcrtc->cursor_y = y; | |
| ret = armada_drm_crtc_cursor_update(dcrtc, false); | |
| return ret; | |
| } | |
| static void armada_drm_crtc_destroy(struct drm_crtc *crtc) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| struct armada_private *priv = drm_to_armada_dev(crtc->dev); | |
| if (dcrtc->cursor_obj) | |
| drm_gem_object_put(&dcrtc->cursor_obj->obj); | |
| priv->dcrtc[dcrtc->num] = NULL; | |
| drm_crtc_cleanup(&dcrtc->crtc); | |
| if (dcrtc->variant->disable) | |
| dcrtc->variant->disable(dcrtc); | |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ENA); | |
| of_node_put(dcrtc->crtc.port); | |
| kfree(dcrtc); | |
| } | |
| static int armada_drm_crtc_late_register(struct drm_crtc *crtc) | |
| { | |
| if (IS_ENABLED(CONFIG_DEBUG_FS)) | |
| armada_drm_crtc_debugfs_init(drm_to_armada_crtc(crtc)); | |
| return 0; | |
| } | |
| /* These are called under the vbl_lock. */ | |
| static int armada_drm_crtc_enable_vblank(struct drm_crtc *crtc) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&dcrtc->irq_lock, flags); | |
| armada_drm_crtc_enable_irq(dcrtc, VSYNC_IRQ_ENA); | |
| spin_unlock_irqrestore(&dcrtc->irq_lock, flags); | |
| return 0; | |
| } | |
| static void armada_drm_crtc_disable_vblank(struct drm_crtc *crtc) | |
| { | |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&dcrtc->irq_lock, flags); | |
| armada_drm_crtc_disable_irq(dcrtc, VSYNC_IRQ_ENA); | |
| spin_unlock_irqrestore(&dcrtc->irq_lock, flags); | |
| } | |
| static const struct drm_crtc_funcs armada_crtc_funcs = { | |
| .reset = drm_atomic_helper_crtc_reset, | |
| .cursor_set = armada_drm_crtc_cursor_set, | |
| .cursor_move = armada_drm_crtc_cursor_move, | |
| .destroy = armada_drm_crtc_destroy, | |
| .set_config = drm_atomic_helper_set_config, | |
| .page_flip = drm_atomic_helper_page_flip, | |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, | |
| .late_register = armada_drm_crtc_late_register, | |
| .enable_vblank = armada_drm_crtc_enable_vblank, | |
| .disable_vblank = armada_drm_crtc_disable_vblank, | |
| }; | |
| int armada_crtc_select_clock(struct armada_crtc *dcrtc, | |
| struct armada_clk_result *res, | |
| const struct armada_clocking_params *params, | |
| struct clk *clks[], size_t num_clks, | |
| unsigned long desired_khz) | |
| { | |
| unsigned long desired_hz = desired_khz * 1000; | |
| unsigned long desired_clk_hz; // requested clk input | |
| unsigned long real_clk_hz; // actual clk input | |
| unsigned long real_hz; // actual pixel clk | |
| unsigned long permillage; | |
| struct clk *clk; | |
| u32 div; | |
| int i; | |
| DRM_DEBUG_KMS("[CRTC:%u:%s] desired clock=%luHz\n", | |
| dcrtc->crtc.base.id, dcrtc->crtc.name, desired_hz); | |
| for (i = 0; i < num_clks; i++) { | |
| clk = clks[i]; | |
| if (!clk) | |
| continue; | |
| if (params->settable & BIT(i)) { | |
| real_clk_hz = clk_round_rate(clk, desired_hz); | |
| desired_clk_hz = desired_hz; | |
| } else { | |
| real_clk_hz = clk_get_rate(clk); | |
| desired_clk_hz = real_clk_hz; | |
| } | |
| /* If the clock can do exactly the desired rate, we're done */ | |
| if (real_clk_hz == desired_hz) { | |
| real_hz = real_clk_hz; | |
| div = 1; | |
| goto found; | |
| } | |
| /* Calculate the divider - if invalid, we can't do this rate */ | |
| div = DIV_ROUND_CLOSEST(real_clk_hz, desired_hz); | |
| if (div == 0 || div > params->div_max) | |
| continue; | |
| /* Calculate the actual rate - HDMI requires -0.6%..+0.5% */ | |
| real_hz = DIV_ROUND_CLOSEST(real_clk_hz, div); | |
| DRM_DEBUG_KMS("[CRTC:%u:%s] clk=%u %luHz div=%u real=%luHz\n", | |
| dcrtc->crtc.base.id, dcrtc->crtc.name, | |
| i, real_clk_hz, div, real_hz); | |
| /* Avoid repeated division */ | |
| if (real_hz < desired_hz) { | |
| permillage = real_hz / desired_khz; | |
| if (permillage < params->permillage_min) | |
| continue; | |
| } else { | |
| permillage = DIV_ROUND_UP(real_hz, desired_khz); | |
| if (permillage > params->permillage_max) | |
| continue; | |
| } | |
| goto found; | |
| } | |
| return -ERANGE; | |
| found: | |
| DRM_DEBUG_KMS("[CRTC:%u:%s] selected clk=%u %luHz div=%u real=%luHz\n", | |
| dcrtc->crtc.base.id, dcrtc->crtc.name, | |
| i, real_clk_hz, div, real_hz); | |
| res->desired_clk_hz = desired_clk_hz; | |
| res->clk = clk; | |
| res->div = div; | |
| return i; | |
| } | |
| static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev, | |
| struct resource *res, int irq, const struct armada_variant *variant, | |
| struct device_node *port) | |
| { | |
| struct armada_private *priv = drm_to_armada_dev(drm); | |
| struct armada_crtc *dcrtc; | |
| struct drm_plane *primary; | |
| void __iomem *base; | |
| int ret; | |
| base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| dcrtc = kzalloc_obj(*dcrtc); | |
| if (!dcrtc) { | |
| DRM_ERROR("failed to allocate Armada crtc\n"); | |
| return -ENOMEM; | |
| } | |
| if (dev != drm->dev) | |
| dev_set_drvdata(dev, dcrtc); | |
| dcrtc->variant = variant; | |
| dcrtc->base = base; | |
| dcrtc->num = drm->mode_config.num_crtc; | |
| dcrtc->cfg_dumb_ctrl = DUMB24_RGB888_0; | |
| dcrtc->spu_iopad_ctrl = CFG_VSCALE_LN_EN | CFG_IOPAD_DUMB24; | |
| spin_lock_init(&dcrtc->irq_lock); | |
| dcrtc->irq_ena = CLEAN_SPU_IRQ_ISR; | |
| /* Initialize some registers which we don't otherwise set */ | |
| writel_relaxed(0x00000001, dcrtc->base + LCD_CFG_SCLK_DIV); | |
| writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_BLANKCOLOR); | |
| writel_relaxed(dcrtc->spu_iopad_ctrl, | |
| dcrtc->base + LCD_SPU_IOPAD_CONTROL); | |
| writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_SRAM_PARA0); | |
| writel_relaxed(CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 | | |
| CFG_PDWN32x32 | CFG_PDWN16x66 | CFG_PDWN32x66 | | |
| CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1); | |
| writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1); | |
| writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); | |
| readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); | |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); | |
| ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc", | |
| dcrtc); | |
| if (ret < 0) | |
| goto err_crtc; | |
| if (dcrtc->variant->init) { | |
| ret = dcrtc->variant->init(dcrtc, dev); | |
| if (ret) | |
| goto err_crtc; | |
| } | |
| /* Ensure AXI pipeline is enabled */ | |
| armada_updatel(CFG_ARBFAST_ENA, 0, dcrtc->base + LCD_SPU_DMA_CTRL0); | |
| priv->dcrtc[dcrtc->num] = dcrtc; | |
| dcrtc->crtc.port = port; | |
| primary = kzalloc_obj(*primary); | |
| if (!primary) { | |
| ret = -ENOMEM; | |
| goto err_crtc; | |
| } | |
| ret = armada_drm_primary_plane_init(drm, primary); | |
| if (ret) { | |
| kfree(primary); | |
| goto err_crtc; | |
| } | |
| ret = drm_crtc_init_with_planes(drm, &dcrtc->crtc, primary, NULL, | |
| &armada_crtc_funcs, NULL); | |
| if (ret) | |
| goto err_crtc_init; | |
| drm_crtc_helper_add(&dcrtc->crtc, &armada_crtc_helper_funcs); | |
| ret = drm_mode_crtc_set_gamma_size(&dcrtc->crtc, 256); | |
| if (ret) | |
| return ret; | |
| drm_crtc_enable_color_mgmt(&dcrtc->crtc, 0, false, 256); | |
| return armada_overlay_plane_create(drm, 1 << dcrtc->num); | |
| err_crtc_init: | |
| primary->funcs->destroy(primary); | |
| err_crtc: | |
| kfree(dcrtc); | |
| return ret; | |
| } | |
| static int | |
| armada_lcd_bind(struct device *dev, struct device *master, void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct drm_device *drm = data; | |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| int irq = platform_get_irq(pdev, 0); | |
| const struct armada_variant *variant; | |
| struct device_node *port = NULL; | |
| struct device_node *np, *parent = dev->of_node; | |
| if (irq < 0) | |
| return irq; | |
| variant = device_get_match_data(dev); | |
| if (!variant) | |
| return -ENXIO; | |
| if (parent) { | |
| np = of_get_child_by_name(parent, "ports"); | |
| if (np) | |
| parent = np; | |
| port = of_get_child_by_name(parent, "port"); | |
| of_node_put(np); | |
| if (!port) { | |
| dev_err(dev, "no port node found in %pOF\n", parent); | |
| return -ENXIO; | |
| } | |
| } | |
| return armada_drm_crtc_create(drm, dev, res, irq, variant, port); | |
| } | |
| static void | |
| armada_lcd_unbind(struct device *dev, struct device *master, void *data) | |
| { | |
| struct armada_crtc *dcrtc = dev_get_drvdata(dev); | |
| armada_drm_crtc_destroy(&dcrtc->crtc); | |
| } | |
| static const struct component_ops armada_lcd_ops = { | |
| .bind = armada_lcd_bind, | |
| .unbind = armada_lcd_unbind, | |
| }; | |
| static int armada_lcd_probe(struct platform_device *pdev) | |
| { | |
| return component_add(&pdev->dev, &armada_lcd_ops); | |
| } | |
| static void armada_lcd_remove(struct platform_device *pdev) | |
| { | |
| component_del(&pdev->dev, &armada_lcd_ops); | |
| } | |
| static const struct of_device_id armada_lcd_of_match[] = { | |
| { | |
| .compatible = "marvell,dove-lcd", | |
| .data = &armada510_ops, | |
| }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, armada_lcd_of_match); | |
| static const struct platform_device_id armada_lcd_platform_ids[] = { | |
| { | |
| .name = "armada-lcd", | |
| .driver_data = (unsigned long)&armada510_ops, | |
| }, { | |
| .name = "armada-510-lcd", | |
| .driver_data = (unsigned long)&armada510_ops, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, armada_lcd_platform_ids); | |
| struct platform_driver armada_lcd_platform_driver = { | |
| .probe = armada_lcd_probe, | |
| .remove = armada_lcd_remove, | |
| .driver = { | |
| .name = "armada-lcd", | |
| .owner = THIS_MODULE, | |
| .of_match_table = armada_lcd_of_match, | |
| }, | |
| .id_table = armada_lcd_platform_ids, | |
| }; |