| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012 Russell King | |
| * | |
| * Armada 510 (aka Dove) variant support | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "armada_crtc.h" | |
| #include "armada_drm.h" | |
| #include "armada_hw.h" | |
| struct armada510_variant_data { | |
| struct clk *clks[4]; | |
| struct clk *sel_clk; | |
| }; | |
| static int armada510_crtc_init(struct armada_crtc *dcrtc, struct device *dev) | |
| { | |
| struct armada510_variant_data *v; | |
| struct clk *clk; | |
| int idx; | |
| v = devm_kzalloc(dev, sizeof(*v), GFP_KERNEL); | |
| if (!v) | |
| return -ENOMEM; | |
| dcrtc->variant_data = v; | |
| if (dev->of_node) { | |
| struct property *prop; | |
| const char *s; | |
| of_property_for_each_string(dev->of_node, "clock-names", prop, | |
| s) { | |
| if (!strcmp(s, "ext_ref_clk0")) | |
| idx = 0; | |
| else if (!strcmp(s, "ext_ref_clk1")) | |
| idx = 1; | |
| else if (!strcmp(s, "plldivider")) | |
| idx = 2; | |
| else if (!strcmp(s, "axibus")) | |
| idx = 3; | |
| else | |
| continue; | |
| clk = devm_clk_get(dev, s); | |
| if (IS_ERR(clk)) | |
| return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER : | |
| PTR_ERR(clk); | |
| v->clks[idx] = clk; | |
| } | |
| } else { | |
| clk = devm_clk_get(dev, "ext_ref_clk1"); | |
| if (IS_ERR(clk)) | |
| return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER : | |
| PTR_ERR(clk); | |
| v->clks[1] = clk; | |
| } | |
| /* | |
| * Lower the watermark so to eliminate jitter at higher bandwidths. | |
| * Disable SRAM read wait state to avoid system hang with external | |
| * clock. | |
| */ | |
| armada_updatel(CFG_DMA_WM(0x20), CFG_SRAM_WAIT | CFG_DMA_WM_MASK, | |
| dcrtc->base + LCD_CFG_RDREG4F); | |
| /* Initialise SPU register */ | |
| writel_relaxed(ADV_HWC32ENABLE | ADV_HWC32ARGB | ADV_HWC32BLEND, | |
| dcrtc->base + LCD_SPU_ADV_REG); | |
| return 0; | |
| } | |
| static const u32 armada510_clk_sels[] = { | |
| SCLK_510_EXTCLK0, | |
| SCLK_510_EXTCLK1, | |
| SCLK_510_PLL, | |
| SCLK_510_AXI, | |
| }; | |
| static const struct armada_clocking_params armada510_clocking = { | |
| /* HDMI requires -0.6%..+0.5% */ | |
| .permillage_min = 994, | |
| .permillage_max = 1005, | |
| .settable = BIT(0) | BIT(1), | |
| .div_max = SCLK_510_INT_DIV_MASK, | |
| }; | |
| /* | |
| * Armada510 specific SCLK register selection. | |
| * This gets called with sclk = NULL to test whether the mode is | |
| * supportable, and again with sclk != NULL to set the clocks up for | |
| * that. The former can return an error, but the latter is expected | |
| * not to. | |
| */ | |
| static int armada510_crtc_compute_clock(struct armada_crtc *dcrtc, | |
| const struct drm_display_mode *mode, uint32_t *sclk) | |
| { | |
| struct armada510_variant_data *v = dcrtc->variant_data; | |
| unsigned long desired_khz = mode->crtc_clock; | |
| struct armada_clk_result res; | |
| int ret, idx; | |
| idx = armada_crtc_select_clock(dcrtc, &res, &armada510_clocking, | |
| v->clks, ARRAY_SIZE(v->clks), | |
| desired_khz); | |
| if (idx < 0) | |
| return idx; | |
| ret = clk_prepare_enable(res.clk); | |
| if (ret) | |
| return ret; | |
| if (sclk) { | |
| clk_set_rate(res.clk, res.desired_clk_hz); | |
| *sclk = res.div | armada510_clk_sels[idx]; | |
| /* We are now using this clock */ | |
| v->sel_clk = res.clk; | |
| swap(dcrtc->clk, res.clk); | |
| } | |
| clk_disable_unprepare(res.clk); | |
| return 0; | |
| } | |
| static void armada510_crtc_disable(struct armada_crtc *dcrtc) | |
| { | |
| if (dcrtc->clk) { | |
| clk_disable_unprepare(dcrtc->clk); | |
| dcrtc->clk = NULL; | |
| } | |
| } | |
| static void armada510_crtc_enable(struct armada_crtc *dcrtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct armada510_variant_data *v = dcrtc->variant_data; | |
| if (!dcrtc->clk && v->sel_clk) { | |
| if (!WARN_ON(clk_prepare_enable(v->sel_clk))) | |
| dcrtc->clk = v->sel_clk; | |
| } | |
| } | |
| const struct armada_variant armada510_ops = { | |
| .has_spu_adv_reg = true, | |
| .init = armada510_crtc_init, | |
| .compute_clock = armada510_crtc_compute_clock, | |
| .disable = armada510_crtc_disable, | |
| .enable = armada510_crtc_enable, | |
| }; |