| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * GPIO Testing Device Driver | |
| * | |
| * Copyright (C) 2014 Kamlakant Patel <kamlakant.patel@broadcom.com> | |
| * Copyright (C) 2015-2016 Bamvor Jian Zhang <bamv2005@gmail.com> | |
| * Copyright (C) 2017 Bartosz Golaszewski <brgl@bgdev.pl> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/cleanup.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/device.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irq_sim.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/limits.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/string_helpers.h> | |
| #include <linux/uaccess.h> | |
| #define GPIO_MOCKUP_MAX_GC 10 | |
| /* | |
| * We're storing two values per chip: the GPIO base and the number | |
| * of GPIO lines. | |
| */ | |
| #define GPIO_MOCKUP_MAX_RANGES (GPIO_MOCKUP_MAX_GC * 2) | |
| /* Maximum of four properties + the sentinel. */ | |
| #define GPIO_MOCKUP_MAX_PROP 5 | |
| /* | |
| * struct gpio_pin_status - structure describing a GPIO status | |
| * @dir: Configures direction of gpio as "in" or "out" | |
| * @value: Configures status of the gpio as 0(low) or 1(high) | |
| * @pull: Configures the current pull of the GPIO as 0 (pull-down) or | |
| * 1 (pull-up) | |
| * @requested: Request status of this GPIO | |
| */ | |
| struct gpio_mockup_line_status { | |
| int dir; | |
| int value; | |
| int pull; | |
| bool requested; | |
| }; | |
| struct gpio_mockup_chip { | |
| struct gpio_chip gc; | |
| struct gpio_mockup_line_status *lines; | |
| struct irq_domain *irq_sim_domain; | |
| struct dentry *dbg_dir; | |
| struct mutex lock; | |
| }; | |
| struct gpio_mockup_dbgfs_private { | |
| struct gpio_mockup_chip *chip; | |
| unsigned int offset; | |
| }; | |
| static int gpio_mockup_ranges[GPIO_MOCKUP_MAX_RANGES]; | |
| static int gpio_mockup_num_ranges; | |
| module_param_array(gpio_mockup_ranges, int, &gpio_mockup_num_ranges, 0400); | |
| static bool gpio_mockup_named_lines; | |
| module_param_named(gpio_mockup_named_lines, | |
| gpio_mockup_named_lines, bool, 0400); | |
| static struct dentry *gpio_mockup_dbg_dir; | |
| static int gpio_mockup_range_base(unsigned int index) | |
| { | |
| return gpio_mockup_ranges[index * 2]; | |
| } | |
| static int gpio_mockup_range_ngpio(unsigned int index) | |
| { | |
| return gpio_mockup_ranges[index * 2 + 1]; | |
| } | |
| static int __gpio_mockup_get(struct gpio_mockup_chip *chip, | |
| unsigned int offset) | |
| { | |
| return chip->lines[offset].value; | |
| } | |
| static int gpio_mockup_get(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| int val; | |
| scoped_guard(mutex, &chip->lock) | |
| val = __gpio_mockup_get(chip, offset); | |
| return val; | |
| } | |
| static int gpio_mockup_get_multiple(struct gpio_chip *gc, | |
| unsigned long *mask, unsigned long *bits) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| unsigned int bit, val; | |
| scoped_guard(mutex, &chip->lock) { | |
| for_each_set_bit(bit, mask, gc->ngpio) { | |
| val = __gpio_mockup_get(chip, bit); | |
| __assign_bit(bit, bits, val); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void __gpio_mockup_set(struct gpio_mockup_chip *chip, | |
| unsigned int offset, int value) | |
| { | |
| chip->lines[offset].value = !!value; | |
| } | |
| static int gpio_mockup_set(struct gpio_chip *gc, | |
| unsigned int offset, int value) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| guard(mutex)(&chip->lock); | |
| __gpio_mockup_set(chip, offset, value); | |
| return 0; | |
| } | |
| static int gpio_mockup_set_multiple(struct gpio_chip *gc, | |
| unsigned long *mask, unsigned long *bits) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| unsigned int bit; | |
| guard(mutex)(&chip->lock); | |
| for_each_set_bit(bit, mask, gc->ngpio) | |
| __gpio_mockup_set(chip, bit, test_bit(bit, bits)); | |
| return 0; | |
| } | |
| static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip, | |
| unsigned int offset, int value) | |
| { | |
| struct gpio_mockup_line_status *line = &chip->lines[offset]; | |
| int curr, irq, irq_type, ret = 0; | |
| guard(mutex)(&chip->lock); | |
| if (line->requested && line->dir == GPIO_LINE_DIRECTION_IN) { | |
| curr = __gpio_mockup_get(chip, offset); | |
| if (curr == value) | |
| goto out; | |
| irq = irq_find_mapping(chip->irq_sim_domain, offset); | |
| if (!irq) | |
| /* | |
| * This is fine - it just means, nobody is listening | |
| * for interrupts on this line, otherwise | |
| * irq_create_mapping() would have been called from | |
| * the to_irq() callback. | |
| */ | |
| goto set_value; | |
| irq_type = irq_get_trigger_type(irq); | |
| if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) || | |
| (value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING))) { | |
| ret = irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, | |
| true); | |
| if (ret) | |
| goto out; | |
| } | |
| } | |
| set_value: | |
| /* Change the value unless we're actively driving the line. */ | |
| if (!line->requested || line->dir == GPIO_LINE_DIRECTION_IN) | |
| __gpio_mockup_set(chip, offset, value); | |
| out: | |
| chip->lines[offset].pull = value; | |
| return ret; | |
| } | |
| static int gpio_mockup_set_config(struct gpio_chip *gc, | |
| unsigned int offset, unsigned long config) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| switch (pinconf_to_config_param(config)) { | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| return gpio_mockup_apply_pull(chip, offset, 1); | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| return gpio_mockup_apply_pull(chip, offset, 0); | |
| default: | |
| break; | |
| } | |
| return -ENOTSUPP; | |
| } | |
| static int gpio_mockup_dirout(struct gpio_chip *gc, | |
| unsigned int offset, int value) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| scoped_guard(mutex, &chip->lock) { | |
| chip->lines[offset].dir = GPIO_LINE_DIRECTION_OUT; | |
| __gpio_mockup_set(chip, offset, value); | |
| } | |
| return 0; | |
| } | |
| static int gpio_mockup_dirin(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| scoped_guard(mutex, &chip->lock) | |
| chip->lines[offset].dir = GPIO_LINE_DIRECTION_IN; | |
| return 0; | |
| } | |
| static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| int direction; | |
| scoped_guard(mutex, &chip->lock) | |
| direction = chip->lines[offset].dir; | |
| return direction; | |
| } | |
| static int gpio_mockup_to_irq(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| return irq_create_mapping(chip->irq_sim_domain, offset); | |
| } | |
| static int gpio_mockup_request(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| scoped_guard(mutex, &chip->lock) | |
| chip->lines[offset].requested = true; | |
| return 0; | |
| } | |
| static void gpio_mockup_free(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct gpio_mockup_chip *chip = gpiochip_get_data(gc); | |
| guard(mutex)(&chip->lock); | |
| chip->lines[offset].requested = false; | |
| __gpio_mockup_set(chip, offset, chip->lines[offset].pull); | |
| } | |
| static ssize_t gpio_mockup_debugfs_read(struct file *file, | |
| char __user *usr_buf, | |
| size_t size, loff_t *ppos) | |
| { | |
| struct gpio_mockup_dbgfs_private *priv; | |
| struct gpio_mockup_chip *chip; | |
| struct seq_file *sfile; | |
| struct gpio_chip *gc; | |
| int val, cnt; | |
| char buf[3]; | |
| if (*ppos != 0) | |
| return 0; | |
| sfile = file->private_data; | |
| priv = sfile->private; | |
| chip = priv->chip; | |
| gc = &chip->gc; | |
| val = gpio_mockup_get(gc, priv->offset); | |
| cnt = snprintf(buf, sizeof(buf), "%d\n", val); | |
| return simple_read_from_buffer(usr_buf, size, ppos, buf, cnt); | |
| } | |
| static ssize_t gpio_mockup_debugfs_write(struct file *file, | |
| const char __user *usr_buf, | |
| size_t size, loff_t *ppos) | |
| { | |
| struct gpio_mockup_dbgfs_private *priv; | |
| int rv, val; | |
| struct seq_file *sfile; | |
| if (*ppos != 0) | |
| return -EINVAL; | |
| rv = kstrtoint_from_user(usr_buf, size, 0, &val); | |
| if (rv) | |
| return rv; | |
| if (val != 0 && val != 1) | |
| return -EINVAL; | |
| sfile = file->private_data; | |
| priv = sfile->private; | |
| rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val); | |
| if (rv) | |
| return rv; | |
| return size; | |
| } | |
| static int gpio_mockup_debugfs_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, NULL, inode->i_private); | |
| } | |
| /* | |
| * Each mockup chip is represented by a directory named after the chip's device | |
| * name under /sys/kernel/debug/gpio-mockup/. Each line is represented by | |
| * a file using the line's offset as the name under the chip's directory. | |
| * | |
| * Reading from the line's file yields the current *value*, writing to the | |
| * line's file changes the current *pull*. Default pull for mockup lines is | |
| * down. | |
| * | |
| * Examples: | |
| * - when a line pulled down is requested in output mode and driven high, its | |
| * value will return to 0 once it's released | |
| * - when the line is requested in output mode and driven high, writing 0 to | |
| * the corresponding debugfs file will change the pull to down but the | |
| * reported value will still be 1 until the line is released | |
| * - line requested in input mode always reports the same value as its pull | |
| * configuration | |
| * - when the line is requested in input mode and monitored for events, writing | |
| * the same value to the debugfs file will be a noop, while writing the | |
| * opposite value will generate a dummy interrupt with an appropriate edge | |
| */ | |
| static const struct file_operations gpio_mockup_debugfs_ops = { | |
| .owner = THIS_MODULE, | |
| .open = gpio_mockup_debugfs_open, | |
| .read = gpio_mockup_debugfs_read, | |
| .write = gpio_mockup_debugfs_write, | |
| .release = single_release, | |
| }; | |
| static void gpio_mockup_debugfs_setup(struct device *dev, | |
| struct gpio_mockup_chip *chip) | |
| { | |
| struct gpio_mockup_dbgfs_private *priv; | |
| struct gpio_chip *gc; | |
| const char *devname; | |
| char *name; | |
| int i; | |
| gc = &chip->gc; | |
| /* | |
| * There can only be a single GPIO device per platform device in | |
| * gpio-mockup so using device_find_any_child() is OK. | |
| */ | |
| struct device *child __free(put_device) = device_find_any_child(dev); | |
| if (!child) | |
| return; | |
| devname = dev_name(child); | |
| chip->dbg_dir = debugfs_create_dir(devname, gpio_mockup_dbg_dir); | |
| for (i = 0; i < gc->ngpio; i++) { | |
| name = devm_kasprintf(dev, GFP_KERNEL, "%d", i); | |
| if (!name) | |
| return; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return; | |
| priv->chip = chip; | |
| priv->offset = i; | |
| debugfs_create_file(name, 0600, chip->dbg_dir, priv, | |
| &gpio_mockup_debugfs_ops); | |
| } | |
| } | |
| static void gpio_mockup_debugfs_cleanup(void *data) | |
| { | |
| struct gpio_mockup_chip *chip = data; | |
| debugfs_remove_recursive(chip->dbg_dir); | |
| } | |
| static void gpio_mockup_dispose_mappings(void *data) | |
| { | |
| struct gpio_mockup_chip *chip = data; | |
| struct gpio_chip *gc = &chip->gc; | |
| int i, irq; | |
| for (i = 0; i < gc->ngpio; i++) { | |
| irq = irq_find_mapping(chip->irq_sim_domain, i); | |
| if (irq) | |
| irq_dispose_mapping(irq); | |
| } | |
| } | |
| static int gpio_mockup_probe(struct platform_device *pdev) | |
| { | |
| struct gpio_mockup_chip *chip; | |
| struct gpio_chip *gc; | |
| struct device *dev; | |
| const char *name; | |
| int rv, base, i; | |
| u16 ngpio; | |
| dev = &pdev->dev; | |
| rv = device_property_read_u32(dev, "gpio-base", &base); | |
| if (rv) | |
| base = -1; | |
| rv = device_property_read_u16(dev, "nr-gpios", &ngpio); | |
| if (rv) | |
| return rv; | |
| rv = device_property_read_string(dev, "chip-label", &name); | |
| if (rv) | |
| name = dev_name(dev); | |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| mutex_init(&chip->lock); | |
| gc = &chip->gc; | |
| gc->base = base; | |
| gc->ngpio = ngpio; | |
| gc->label = name; | |
| gc->owner = THIS_MODULE; | |
| gc->parent = dev; | |
| gc->get = gpio_mockup_get; | |
| gc->set = gpio_mockup_set; | |
| gc->get_multiple = gpio_mockup_get_multiple; | |
| gc->set_multiple = gpio_mockup_set_multiple; | |
| gc->direction_output = gpio_mockup_dirout; | |
| gc->direction_input = gpio_mockup_dirin; | |
| gc->get_direction = gpio_mockup_get_direction; | |
| gc->set_config = gpio_mockup_set_config; | |
| gc->to_irq = gpio_mockup_to_irq; | |
| gc->request = gpio_mockup_request; | |
| gc->free = gpio_mockup_free; | |
| chip->lines = devm_kcalloc(dev, gc->ngpio, | |
| sizeof(*chip->lines), GFP_KERNEL); | |
| if (!chip->lines) | |
| return -ENOMEM; | |
| for (i = 0; i < gc->ngpio; i++) | |
| chip->lines[i].dir = GPIO_LINE_DIRECTION_IN; | |
| chip->irq_sim_domain = devm_irq_domain_create_sim(dev, NULL, | |
| gc->ngpio); | |
| if (IS_ERR(chip->irq_sim_domain)) | |
| return PTR_ERR(chip->irq_sim_domain); | |
| rv = devm_add_action_or_reset(dev, gpio_mockup_dispose_mappings, chip); | |
| if (rv) | |
| return rv; | |
| rv = devm_gpiochip_add_data(dev, &chip->gc, chip); | |
| if (rv) | |
| return rv; | |
| gpio_mockup_debugfs_setup(dev, chip); | |
| return devm_add_action_or_reset(dev, gpio_mockup_debugfs_cleanup, chip); | |
| } | |
| static const struct of_device_id gpio_mockup_of_match[] = { | |
| { .compatible = "gpio-mockup", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, gpio_mockup_of_match); | |
| static struct platform_driver gpio_mockup_driver = { | |
| .driver = { | |
| .name = "gpio-mockup", | |
| .of_match_table = gpio_mockup_of_match, | |
| }, | |
| .probe = gpio_mockup_probe, | |
| }; | |
| static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC]; | |
| static void gpio_mockup_unregister_pdevs(void) | |
| { | |
| struct platform_device *pdev; | |
| struct fwnode_handle *fwnode; | |
| int i; | |
| for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) { | |
| pdev = gpio_mockup_pdevs[i]; | |
| if (!pdev) | |
| continue; | |
| fwnode = dev_fwnode(&pdev->dev); | |
| platform_device_unregister(pdev); | |
| fwnode_remove_software_node(fwnode); | |
| } | |
| } | |
| static int __init gpio_mockup_register_chip(int idx) | |
| { | |
| struct property_entry properties[GPIO_MOCKUP_MAX_PROP]; | |
| struct platform_device_info pdevinfo; | |
| struct platform_device *pdev; | |
| struct fwnode_handle *fwnode; | |
| char **line_names = NULL; | |
| char chip_label[32]; | |
| int prop = 0, base; | |
| u16 ngpio; | |
| memset(properties, 0, sizeof(properties)); | |
| memset(&pdevinfo, 0, sizeof(pdevinfo)); | |
| snprintf(chip_label, sizeof(chip_label), "gpio-mockup-%c", idx + 'A'); | |
| properties[prop++] = PROPERTY_ENTRY_STRING("chip-label", chip_label); | |
| base = gpio_mockup_range_base(idx); | |
| if (base >= 0) | |
| properties[prop++] = PROPERTY_ENTRY_U32("gpio-base", base); | |
| ngpio = base < 0 ? gpio_mockup_range_ngpio(idx) | |
| : gpio_mockup_range_ngpio(idx) - base; | |
| properties[prop++] = PROPERTY_ENTRY_U16("nr-gpios", ngpio); | |
| if (gpio_mockup_named_lines) { | |
| line_names = kasprintf_strarray(GFP_KERNEL, chip_label, ngpio); | |
| if (!line_names) | |
| return -ENOMEM; | |
| properties[prop++] = PROPERTY_ENTRY_STRING_ARRAY_LEN( | |
| "gpio-line-names", line_names, ngpio); | |
| } | |
| fwnode = fwnode_create_software_node(properties, NULL); | |
| if (IS_ERR(fwnode)) { | |
| kfree_strarray(line_names, ngpio); | |
| return PTR_ERR(fwnode); | |
| } | |
| pdevinfo.name = "gpio-mockup"; | |
| pdevinfo.id = idx; | |
| pdevinfo.fwnode = fwnode; | |
| pdev = platform_device_register_full(&pdevinfo); | |
| kfree_strarray(line_names, ngpio); | |
| if (IS_ERR(pdev)) { | |
| fwnode_remove_software_node(fwnode); | |
| pr_err("error registering device"); | |
| return PTR_ERR(pdev); | |
| } | |
| gpio_mockup_pdevs[idx] = pdev; | |
| return 0; | |
| } | |
| static int __init gpio_mockup_init(void) | |
| { | |
| int i, num_chips, err, base, ngpio; | |
| if ((gpio_mockup_num_ranges % 2) || | |
| (gpio_mockup_num_ranges > GPIO_MOCKUP_MAX_RANGES)) | |
| return -EINVAL; | |
| /* Each chip is described by two values. */ | |
| num_chips = gpio_mockup_num_ranges / 2; | |
| /* | |
| * The second value in the <base GPIO - number of GPIOS> pair must | |
| * always be greater than 0. | |
| */ | |
| for (i = 0; i < num_chips; i++) { | |
| base = gpio_mockup_range_base(i); | |
| ngpio = gpio_mockup_range_ngpio(i); | |
| if (ngpio <= 0) | |
| return -EINVAL; | |
| if (base < 0) { | |
| if (ngpio > U16_MAX) | |
| return -EINVAL; | |
| } else { | |
| if (ngpio <= base || ngpio - base > U16_MAX) | |
| return -EINVAL; | |
| } | |
| } | |
| gpio_mockup_dbg_dir = debugfs_create_dir("gpio-mockup", NULL); | |
| err = platform_driver_register(&gpio_mockup_driver); | |
| if (err) { | |
| pr_err("error registering platform driver\n"); | |
| debugfs_remove_recursive(gpio_mockup_dbg_dir); | |
| return err; | |
| } | |
| for (i = 0; i < num_chips; i++) { | |
| err = gpio_mockup_register_chip(i); | |
| if (err) { | |
| platform_driver_unregister(&gpio_mockup_driver); | |
| gpio_mockup_unregister_pdevs(); | |
| debugfs_remove_recursive(gpio_mockup_dbg_dir); | |
| return err; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void __exit gpio_mockup_exit(void) | |
| { | |
| gpio_mockup_unregister_pdevs(); | |
| debugfs_remove_recursive(gpio_mockup_dbg_dir); | |
| platform_driver_unregister(&gpio_mockup_driver); | |
| } | |
| module_init(gpio_mockup_init); | |
| module_exit(gpio_mockup_exit); | |
| MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); | |
| MODULE_AUTHOR("Bamvor Jian Zhang <bamv2005@gmail.com>"); | |
| MODULE_AUTHOR("Bartosz Golaszewski <brgl@bgdev.pl>"); | |
| MODULE_DESCRIPTION("GPIO Testing driver"); | |
| MODULE_LICENSE("GPL v2"); |