| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * FSI core driver | |
| * | |
| * Copyright (C) IBM Corporation 2016 | |
| * | |
| * TODO: | |
| * - Rework topology | |
| * - s/chip_id/chip_loc | |
| * - s/cfam/chip (cfam_id -> chip_id etc...) | |
| */ | |
| #include <linux/crc4.h> | |
| #include <linux/device.h> | |
| #include <linux/fsi.h> | |
| #include <linux/idr.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/bitops.h> | |
| #include <linux/cdev.h> | |
| #include <linux/fs.h> | |
| #include <linux/uaccess.h> | |
| #include "fsi-master.h" | |
| #include "fsi-slave.h" | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/fsi.h> | |
| #define FSI_SLAVE_CONF_NEXT_MASK GENMASK(31, 31) | |
| #define FSI_SLAVE_CONF_SLOTS_MASK GENMASK(23, 16) | |
| #define FSI_SLAVE_CONF_SLOTS_SHIFT 16 | |
| #define FSI_SLAVE_CONF_VERSION_MASK GENMASK(15, 12) | |
| #define FSI_SLAVE_CONF_VERSION_SHIFT 12 | |
| #define FSI_SLAVE_CONF_TYPE_MASK GENMASK(11, 4) | |
| #define FSI_SLAVE_CONF_TYPE_SHIFT 4 | |
| #define FSI_SLAVE_CONF_CRC_SHIFT 4 | |
| #define FSI_SLAVE_CONF_CRC_MASK GENMASK(3, 0) | |
| #define FSI_SLAVE_CONF_DATA_BITS 28 | |
| #define FSI_PEEK_BASE 0x410 | |
| static const int engine_page_size = 0x400; | |
| #define FSI_SLAVE_BASE 0x800 | |
| /* | |
| * FSI slave engine control register offsets | |
| */ | |
| #define FSI_SMODE 0x0 /* R/W: Mode register */ | |
| #define FSI_SISC 0x8 /* R/W: Interrupt condition */ | |
| #define FSI_SSTAT 0x14 /* R : Slave status */ | |
| #define FSI_SLBUS 0x30 /* W : LBUS Ownership */ | |
| #define FSI_LLMODE 0x100 /* R/W: Link layer mode register */ | |
| /* | |
| * SMODE fields | |
| */ | |
| #define FSI_SMODE_WSC 0x80000000 /* Warm start done */ | |
| #define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */ | |
| #define FSI_SMODE_SID_SHIFT 24 /* ID shift */ | |
| #define FSI_SMODE_SID_MASK 3 /* ID Mask */ | |
| #define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */ | |
| #define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */ | |
| #define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */ | |
| #define FSI_SMODE_SD_MASK 0xf /* Send delay mask */ | |
| #define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */ | |
| #define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */ | |
| /* | |
| * SLBUS fields | |
| */ | |
| #define FSI_SLBUS_FORCE 0x80000000 /* Force LBUS ownership */ | |
| /* | |
| * LLMODE fields | |
| */ | |
| #define FSI_LLMODE_ASYNC 0x1 | |
| #define FSI_SLAVE_SIZE_23b 0x800000 | |
| static DEFINE_IDA(master_ida); | |
| static const int slave_retries = 2; | |
| static int discard_errors; | |
| static dev_t fsi_base_dev; | |
| static DEFINE_IDA(fsi_minor_ida); | |
| #define FSI_CHAR_MAX_DEVICES 0x1000 | |
| /* Legacy /dev numbering: 4 devices per chip, 16 chips */ | |
| #define FSI_CHAR_LEGACY_TOP 64 | |
| static int fsi_master_read(struct fsi_master *master, int link, | |
| uint8_t slave_id, uint32_t addr, void *val, size_t size); | |
| static int fsi_master_write(struct fsi_master *master, int link, | |
| uint8_t slave_id, uint32_t addr, const void *val, size_t size); | |
| static int fsi_master_break(struct fsi_master *master, int link); | |
| /* FSI core & Linux bus type definitions */ | |
| static int fsi_bus_match(struct device *dev, const struct device_driver *drv) | |
| { | |
| struct fsi_device *fsi_dev = to_fsi_dev(dev); | |
| const struct fsi_driver *fsi_drv = to_fsi_drv(drv); | |
| const struct fsi_device_id *id; | |
| if (!fsi_drv->id_table) | |
| return 0; | |
| for (id = fsi_drv->id_table; id->engine_type; id++) { | |
| if (id->engine_type != fsi_dev->engine_type) | |
| continue; | |
| if (id->version == FSI_VERSION_ANY || | |
| id->version == fsi_dev->version) { | |
| if (drv->of_match_table) { | |
| if (of_driver_match_device(dev, drv)) | |
| return 1; | |
| } else { | |
| return 1; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int fsi_probe(struct device *dev) | |
| { | |
| struct fsi_device *fsidev = to_fsi_dev(dev); | |
| struct fsi_driver *fsidrv = to_fsi_drv(dev->driver); | |
| if (fsidrv->probe) | |
| return fsidrv->probe(fsidev); | |
| else | |
| return 0; | |
| } | |
| static void fsi_remove(struct device *dev) | |
| { | |
| struct fsi_device *fsidev = to_fsi_dev(dev); | |
| struct fsi_driver *fsidrv = to_fsi_drv(dev->driver); | |
| if (fsidrv->remove) | |
| fsidrv->remove(fsidev); | |
| } | |
| static const struct bus_type fsi_bus_type = { | |
| .name = "fsi", | |
| .match = fsi_bus_match, | |
| .probe = fsi_probe, | |
| .remove = fsi_remove, | |
| }; | |
| /* | |
| * fsi_device_read() / fsi_device_write() / fsi_device_peek() | |
| * | |
| * FSI endpoint-device support | |
| * | |
| * Read / write / peek accessors for a client | |
| * | |
| * Parameters: | |
| * dev: Structure passed to FSI client device drivers on probe(). | |
| * addr: FSI address of given device. Client should pass in its base address | |
| * plus desired offset to access its register space. | |
| * val: For read/peek this is the value read at the specified address. For | |
| * write this is value to write to the specified address. | |
| * The data in val must be FSI bus endian (big endian). | |
| * size: Size in bytes of the operation. Sizes supported are 1, 2 and 4 bytes. | |
| * Addresses must be aligned on size boundaries or an error will result. | |
| */ | |
| int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val, | |
| size_t size) | |
| { | |
| if (addr > dev->size || size > dev->size || addr > dev->size - size) | |
| return -EINVAL; | |
| return fsi_slave_read(dev->slave, dev->addr + addr, val, size); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_device_read); | |
| int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val, | |
| size_t size) | |
| { | |
| if (addr > dev->size || size > dev->size || addr > dev->size - size) | |
| return -EINVAL; | |
| return fsi_slave_write(dev->slave, dev->addr + addr, val, size); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_device_write); | |
| int fsi_device_peek(struct fsi_device *dev, void *val) | |
| { | |
| uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t)); | |
| return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t)); | |
| } | |
| static void fsi_device_release(struct device *_device) | |
| { | |
| struct fsi_device *device = to_fsi_dev(_device); | |
| of_node_put(device->dev.of_node); | |
| kfree(device); | |
| } | |
| static struct fsi_device *fsi_create_device(struct fsi_slave *slave) | |
| { | |
| struct fsi_device *dev; | |
| dev = kzalloc_obj(*dev); | |
| if (!dev) | |
| return NULL; | |
| dev->dev.parent = &slave->dev; | |
| dev->dev.bus = &fsi_bus_type; | |
| dev->dev.release = fsi_device_release; | |
| return dev; | |
| } | |
| /* FSI slave support */ | |
| static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp, | |
| uint8_t *idp) | |
| { | |
| uint32_t addr = *addrp; | |
| uint8_t id = *idp; | |
| if (addr > slave->size) | |
| return -EINVAL; | |
| /* For 23 bit addressing, we encode the extra two bits in the slave | |
| * id (and the slave's actual ID needs to be 0). | |
| */ | |
| if (addr > 0x1fffff) { | |
| if (slave->id != 0) | |
| return -EINVAL; | |
| id = (addr >> 21) & 0x3; | |
| addr &= 0x1fffff; | |
| } | |
| *addrp = addr; | |
| *idp = id; | |
| return 0; | |
| } | |
| static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave) | |
| { | |
| struct fsi_master *master = slave->master; | |
| __be32 irq, stat; | |
| int rc, link; | |
| uint8_t id; | |
| link = slave->link; | |
| id = slave->id; | |
| rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC, | |
| &irq, sizeof(irq)); | |
| if (rc) | |
| return rc; | |
| rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT, | |
| &stat, sizeof(stat)); | |
| if (rc) | |
| return rc; | |
| dev_dbg(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n", | |
| be32_to_cpu(stat), be32_to_cpu(irq)); | |
| /* clear interrupts */ | |
| return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC, | |
| &irq, sizeof(irq)); | |
| } | |
| /* Encode slave local bus echo delay */ | |
| static inline uint32_t fsi_smode_echodly(int x) | |
| { | |
| return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT; | |
| } | |
| /* Encode slave local bus send delay */ | |
| static inline uint32_t fsi_smode_senddly(int x) | |
| { | |
| return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT; | |
| } | |
| /* Encode slave local bus clock rate ratio */ | |
| static inline uint32_t fsi_smode_lbcrr(int x) | |
| { | |
| return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT; | |
| } | |
| /* Encode slave ID */ | |
| static inline uint32_t fsi_smode_sid(int x) | |
| { | |
| return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT; | |
| } | |
| static uint32_t fsi_slave_smode(int id, u8 t_senddly, u8 t_echodly) | |
| { | |
| return FSI_SMODE_WSC | FSI_SMODE_ECRC | |
| | fsi_smode_sid(id) | |
| | fsi_smode_echodly(t_echodly - 1) | fsi_smode_senddly(t_senddly - 1) | |
| | fsi_smode_lbcrr(0x8); | |
| } | |
| static int fsi_slave_set_smode(struct fsi_slave *slave) | |
| { | |
| uint32_t smode; | |
| __be32 data; | |
| /* set our smode register with the slave ID field to 0; this enables | |
| * extended slave addressing | |
| */ | |
| smode = fsi_slave_smode(slave->id, slave->t_send_delay, slave->t_echo_delay); | |
| data = cpu_to_be32(smode); | |
| return fsi_master_write(slave->master, slave->link, slave->id, | |
| FSI_SLAVE_BASE + FSI_SMODE, | |
| &data, sizeof(data)); | |
| } | |
| static int fsi_slave_handle_error(struct fsi_slave *slave, bool write, | |
| uint32_t addr, size_t size) | |
| { | |
| struct fsi_master *master = slave->master; | |
| int rc, link; | |
| uint32_t reg; | |
| uint8_t id, send_delay, echo_delay; | |
| if (discard_errors) | |
| return -1; | |
| link = slave->link; | |
| id = slave->id; | |
| dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]", | |
| write ? "write" : "read", addr, size); | |
| /* try a simple clear of error conditions, which may fail if we've lost | |
| * communication with the slave | |
| */ | |
| rc = fsi_slave_report_and_clear_errors(slave); | |
| if (!rc) | |
| return 0; | |
| /* send a TERM and retry */ | |
| if (master->term) { | |
| rc = master->term(master, link, id); | |
| if (!rc) { | |
| rc = fsi_master_read(master, link, id, 0, | |
| ®, sizeof(reg)); | |
| if (!rc) | |
| rc = fsi_slave_report_and_clear_errors(slave); | |
| if (!rc) | |
| return 0; | |
| } | |
| } | |
| send_delay = slave->t_send_delay; | |
| echo_delay = slave->t_echo_delay; | |
| /* getting serious, reset the slave via BREAK */ | |
| rc = fsi_master_break(master, link); | |
| if (rc) | |
| return rc; | |
| slave->t_send_delay = send_delay; | |
| slave->t_echo_delay = echo_delay; | |
| rc = fsi_slave_set_smode(slave); | |
| if (rc) | |
| return rc; | |
| if (master->link_config) | |
| master->link_config(master, link, | |
| slave->t_send_delay, | |
| slave->t_echo_delay); | |
| return fsi_slave_report_and_clear_errors(slave); | |
| } | |
| int fsi_slave_read(struct fsi_slave *slave, uint32_t addr, | |
| void *val, size_t size) | |
| { | |
| uint8_t id = slave->id; | |
| int rc, err_rc, i; | |
| rc = fsi_slave_calc_addr(slave, &addr, &id); | |
| if (rc) | |
| return rc; | |
| for (i = 0; i < slave_retries; i++) { | |
| rc = fsi_master_read(slave->master, slave->link, | |
| id, addr, val, size); | |
| if (!rc) | |
| break; | |
| err_rc = fsi_slave_handle_error(slave, false, addr, size); | |
| if (err_rc) | |
| break; | |
| } | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_slave_read); | |
| int fsi_slave_write(struct fsi_slave *slave, uint32_t addr, | |
| const void *val, size_t size) | |
| { | |
| uint8_t id = slave->id; | |
| int rc, err_rc, i; | |
| rc = fsi_slave_calc_addr(slave, &addr, &id); | |
| if (rc) | |
| return rc; | |
| for (i = 0; i < slave_retries; i++) { | |
| rc = fsi_master_write(slave->master, slave->link, | |
| id, addr, val, size); | |
| if (!rc) | |
| break; | |
| err_rc = fsi_slave_handle_error(slave, true, addr, size); | |
| if (err_rc) | |
| break; | |
| } | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_slave_write); | |
| int fsi_slave_claim_range(struct fsi_slave *slave, | |
| uint32_t addr, uint32_t size) | |
| { | |
| if (addr + size < addr) | |
| return -EINVAL; | |
| if (addr + size > slave->size) | |
| return -EINVAL; | |
| /* todo: check for overlapping claims */ | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_slave_claim_range); | |
| void fsi_slave_release_range(struct fsi_slave *slave, | |
| uint32_t addr, uint32_t size) | |
| { | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_slave_release_range); | |
| static bool fsi_device_node_matches(struct device *dev, struct device_node *np, | |
| uint32_t addr, uint32_t size) | |
| { | |
| u64 paddr, psize; | |
| if (of_property_read_reg(np, 0, &paddr, &psize)) | |
| return false; | |
| if (paddr != addr) | |
| return false; | |
| if (psize != size) { | |
| dev_warn(dev, | |
| "node %pOF matches probed address, but not size (got 0x%llx, expected 0x%x)", | |
| np, psize, size); | |
| } | |
| return true; | |
| } | |
| /* Find a matching node for the slave engine at @address, using @size bytes | |
| * of space. Returns NULL if not found, or a matching node with refcount | |
| * already incremented. | |
| */ | |
| static struct device_node *fsi_device_find_of_node(struct fsi_device *dev) | |
| { | |
| struct device_node *parent, *np; | |
| parent = dev_of_node(&dev->slave->dev); | |
| if (!parent) | |
| return NULL; | |
| for_each_child_of_node(parent, np) { | |
| if (fsi_device_node_matches(&dev->dev, np, | |
| dev->addr, dev->size)) | |
| return np; | |
| } | |
| return NULL; | |
| } | |
| static int fsi_slave_scan(struct fsi_slave *slave) | |
| { | |
| uint32_t engine_addr; | |
| int rc, i; | |
| /* | |
| * scan engines | |
| * | |
| * We keep the peek mode and slave engines for the core; so start | |
| * at the third slot in the configuration table. We also need to | |
| * skip the chip ID entry at the start of the address space. | |
| */ | |
| engine_addr = engine_page_size * 3; | |
| for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) { | |
| uint8_t slots, version, type, crc; | |
| struct fsi_device *dev; | |
| uint32_t conf; | |
| __be32 data; | |
| rc = fsi_slave_read(slave, (i + 1) * sizeof(data), | |
| &data, sizeof(data)); | |
| if (rc) { | |
| dev_warn(&slave->dev, | |
| "error reading slave registers\n"); | |
| return -1; | |
| } | |
| conf = be32_to_cpu(data); | |
| crc = crc4(0, conf, 32); | |
| if (crc) { | |
| dev_warn(&slave->dev, | |
| "crc error in slave register at 0x%04x\n", | |
| i); | |
| return -1; | |
| } | |
| slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK) | |
| >> FSI_SLAVE_CONF_SLOTS_SHIFT; | |
| version = (conf & FSI_SLAVE_CONF_VERSION_MASK) | |
| >> FSI_SLAVE_CONF_VERSION_SHIFT; | |
| type = (conf & FSI_SLAVE_CONF_TYPE_MASK) | |
| >> FSI_SLAVE_CONF_TYPE_SHIFT; | |
| /* | |
| * Unused address areas are marked by a zero type value; this | |
| * skips the defined address areas | |
| */ | |
| if (type != 0 && slots != 0) { | |
| /* create device */ | |
| dev = fsi_create_device(slave); | |
| if (!dev) | |
| return -ENOMEM; | |
| dev->slave = slave; | |
| dev->engine_type = type; | |
| dev->version = version; | |
| dev->unit = i; | |
| dev->addr = engine_addr; | |
| dev->size = slots * engine_page_size; | |
| trace_fsi_dev_init(dev); | |
| dev_dbg(&slave->dev, | |
| "engine[%i]: type %x, version %x, addr %x size %x\n", | |
| dev->unit, dev->engine_type, version, | |
| dev->addr, dev->size); | |
| dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x", | |
| slave->master->idx, slave->link, | |
| slave->id, i - 2); | |
| dev->dev.of_node = fsi_device_find_of_node(dev); | |
| rc = device_register(&dev->dev); | |
| if (rc) { | |
| dev_warn(&slave->dev, "add failed: %d\n", rc); | |
| put_device(&dev->dev); | |
| } | |
| } | |
| engine_addr += slots * engine_page_size; | |
| if (!(conf & FSI_SLAVE_CONF_NEXT_MASK)) | |
| break; | |
| } | |
| return 0; | |
| } | |
| static unsigned long aligned_access_size(size_t offset, size_t count) | |
| { | |
| unsigned long offset_unit, count_unit; | |
| /* Criteria: | |
| * | |
| * 1. Access size must be less than or equal to the maximum access | |
| * width or the highest power-of-two factor of offset | |
| * 2. Access size must be less than or equal to the amount specified by | |
| * count | |
| * | |
| * The access width is optimal if we can calculate 1 to be strictly | |
| * equal while still satisfying 2. | |
| */ | |
| /* Find 1 by the bottom bit of offset (with a 4 byte access cap) */ | |
| offset_unit = BIT(__builtin_ctzl(offset | 4)); | |
| /* Find 2 by the top bit of count */ | |
| count_unit = BIT(8 * sizeof(unsigned long) - 1 - __builtin_clzl(count)); | |
| /* Constrain the maximum access width to the minimum of both criteria */ | |
| return BIT(__builtin_ctzl(offset_unit | count_unit)); | |
| } | |
| static ssize_t fsi_slave_sysfs_raw_read(struct file *file, | |
| struct kobject *kobj, const struct bin_attribute *attr, char *buf, | |
| loff_t off, size_t count) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); | |
| size_t total_len, read_len; | |
| int rc; | |
| if (off < 0) | |
| return -EINVAL; | |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | |
| return -EINVAL; | |
| for (total_len = 0; total_len < count; total_len += read_len) { | |
| read_len = aligned_access_size(off, count - total_len); | |
| rc = fsi_slave_read(slave, off, buf + total_len, read_len); | |
| if (rc) | |
| return rc; | |
| off += read_len; | |
| } | |
| return count; | |
| } | |
| static ssize_t fsi_slave_sysfs_raw_write(struct file *file, | |
| struct kobject *kobj, const struct bin_attribute *attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); | |
| size_t total_len, write_len; | |
| int rc; | |
| if (off < 0) | |
| return -EINVAL; | |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | |
| return -EINVAL; | |
| for (total_len = 0; total_len < count; total_len += write_len) { | |
| write_len = aligned_access_size(off, count - total_len); | |
| rc = fsi_slave_write(slave, off, buf + total_len, write_len); | |
| if (rc) | |
| return rc; | |
| off += write_len; | |
| } | |
| return count; | |
| } | |
| static const struct bin_attribute fsi_slave_raw_attr = { | |
| .attr = { | |
| .name = "raw", | |
| .mode = 0600, | |
| }, | |
| .size = 0, | |
| .read = fsi_slave_sysfs_raw_read, | |
| .write = fsi_slave_sysfs_raw_write, | |
| }; | |
| static void fsi_slave_release(struct device *dev) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| fsi_free_minor(slave->dev.devt); | |
| of_node_put(dev->of_node); | |
| kfree(slave); | |
| } | |
| static bool fsi_slave_node_matches(struct device_node *np, | |
| int link, uint8_t id) | |
| { | |
| u64 addr; | |
| if (of_property_read_reg(np, 0, &addr, NULL)) | |
| return false; | |
| return addr == (((u64)link << 32) | id); | |
| } | |
| /* Find a matching node for the slave at (link, id). Returns NULL if none | |
| * found, or a matching node with refcount already incremented. | |
| */ | |
| static struct device_node *fsi_slave_find_of_node(struct fsi_master *master, | |
| int link, uint8_t id) | |
| { | |
| struct device_node *parent, *np; | |
| parent = dev_of_node(&master->dev); | |
| if (!parent) | |
| return NULL; | |
| for_each_child_of_node(parent, np) { | |
| if (fsi_slave_node_matches(np, link, id)) | |
| return np; | |
| } | |
| return NULL; | |
| } | |
| static ssize_t cfam_read(struct file *filep, char __user *buf, size_t count, | |
| loff_t *offset) | |
| { | |
| struct fsi_slave *slave = filep->private_data; | |
| size_t total_len, read_len; | |
| loff_t off = *offset; | |
| ssize_t rc; | |
| if (off < 0) | |
| return -EINVAL; | |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | |
| return -EINVAL; | |
| for (total_len = 0; total_len < count; total_len += read_len) { | |
| __be32 data; | |
| read_len = min_t(size_t, count, 4); | |
| read_len -= off & 0x3; | |
| rc = fsi_slave_read(slave, off, &data, read_len); | |
| if (rc) | |
| goto fail; | |
| rc = copy_to_user(buf + total_len, &data, read_len); | |
| if (rc) { | |
| rc = -EFAULT; | |
| goto fail; | |
| } | |
| off += read_len; | |
| } | |
| rc = count; | |
| fail: | |
| *offset = off; | |
| return rc; | |
| } | |
| static ssize_t cfam_write(struct file *filep, const char __user *buf, | |
| size_t count, loff_t *offset) | |
| { | |
| struct fsi_slave *slave = filep->private_data; | |
| size_t total_len, write_len; | |
| loff_t off = *offset; | |
| ssize_t rc; | |
| if (off < 0) | |
| return -EINVAL; | |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | |
| return -EINVAL; | |
| for (total_len = 0; total_len < count; total_len += write_len) { | |
| __be32 data; | |
| write_len = min_t(size_t, count, 4); | |
| write_len -= off & 0x3; | |
| rc = copy_from_user(&data, buf + total_len, write_len); | |
| if (rc) { | |
| rc = -EFAULT; | |
| goto fail; | |
| } | |
| rc = fsi_slave_write(slave, off, &data, write_len); | |
| if (rc) | |
| goto fail; | |
| off += write_len; | |
| } | |
| rc = count; | |
| fail: | |
| *offset = off; | |
| return rc; | |
| } | |
| static loff_t cfam_llseek(struct file *file, loff_t offset, int whence) | |
| { | |
| switch (whence) { | |
| case SEEK_CUR: | |
| break; | |
| case SEEK_SET: | |
| file->f_pos = offset; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return offset; | |
| } | |
| static int cfam_open(struct inode *inode, struct file *file) | |
| { | |
| struct fsi_slave *slave = container_of(inode->i_cdev, struct fsi_slave, cdev); | |
| file->private_data = slave; | |
| return 0; | |
| } | |
| static const struct file_operations cfam_fops = { | |
| .owner = THIS_MODULE, | |
| .open = cfam_open, | |
| .llseek = cfam_llseek, | |
| .read = cfam_read, | |
| .write = cfam_write, | |
| }; | |
| static ssize_t send_term_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| struct fsi_master *master = slave->master; | |
| if (!master->term) | |
| return -ENODEV; | |
| master->term(master, slave->link, slave->id); | |
| return count; | |
| } | |
| static DEVICE_ATTR_WO(send_term); | |
| static ssize_t slave_send_echo_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| return sprintf(buf, "%u\n", slave->t_send_delay); | |
| } | |
| static ssize_t slave_send_echo_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| struct fsi_master *master = slave->master; | |
| unsigned long val; | |
| int rc; | |
| if (kstrtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| if (val < 1 || val > 16) | |
| return -EINVAL; | |
| if (!master->link_config) | |
| return -ENXIO; | |
| /* Current HW mandates that send and echo delay are identical */ | |
| slave->t_send_delay = val; | |
| slave->t_echo_delay = val; | |
| rc = fsi_slave_set_smode(slave); | |
| if (rc < 0) | |
| return rc; | |
| if (master->link_config) | |
| master->link_config(master, slave->link, | |
| slave->t_send_delay, | |
| slave->t_echo_delay); | |
| return count; | |
| } | |
| static DEVICE_ATTR(send_echo_delays, 0600, | |
| slave_send_echo_show, slave_send_echo_store); | |
| static ssize_t chip_id_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| return sprintf(buf, "%d\n", slave->chip_id); | |
| } | |
| static DEVICE_ATTR_RO(chip_id); | |
| static ssize_t cfam_id_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| return sprintf(buf, "0x%x\n", slave->cfam_id); | |
| } | |
| static DEVICE_ATTR_RO(cfam_id); | |
| static struct attribute *cfam_attr[] = { | |
| &dev_attr_send_echo_delays.attr, | |
| &dev_attr_chip_id.attr, | |
| &dev_attr_cfam_id.attr, | |
| &dev_attr_send_term.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group cfam_attr_group = { | |
| .attrs = cfam_attr, | |
| }; | |
| static const struct attribute_group *cfam_attr_groups[] = { | |
| &cfam_attr_group, | |
| NULL, | |
| }; | |
| static char *cfam_devnode(const struct device *dev, umode_t *mode, | |
| kuid_t *uid, kgid_t *gid) | |
| { | |
| const struct fsi_slave *slave = to_fsi_slave(dev); | |
| #ifdef CONFIG_FSI_NEW_DEV_NODE | |
| return kasprintf(GFP_KERNEL, "fsi/cfam%d", slave->cdev_idx); | |
| #else | |
| return kasprintf(GFP_KERNEL, "cfam%d", slave->cdev_idx); | |
| #endif | |
| } | |
| static const struct device_type cfam_type = { | |
| .name = "cfam", | |
| .devnode = cfam_devnode, | |
| .groups = cfam_attr_groups | |
| }; | |
| static char *fsi_cdev_devnode(const struct device *dev, umode_t *mode, | |
| kuid_t *uid, kgid_t *gid) | |
| { | |
| #ifdef CONFIG_FSI_NEW_DEV_NODE | |
| return kasprintf(GFP_KERNEL, "fsi/%s", dev_name(dev)); | |
| #else | |
| return kasprintf(GFP_KERNEL, "%s", dev_name(dev)); | |
| #endif | |
| } | |
| const struct device_type fsi_cdev_type = { | |
| .name = "fsi-cdev", | |
| .devnode = fsi_cdev_devnode, | |
| }; | |
| EXPORT_SYMBOL_GPL(fsi_cdev_type); | |
| /* Backward compatible /dev/ numbering in "old style" mode */ | |
| static int fsi_adjust_index(int index) | |
| { | |
| #ifdef CONFIG_FSI_NEW_DEV_NODE | |
| return index; | |
| #else | |
| return index + 1; | |
| #endif | |
| } | |
| static int __fsi_get_new_minor(struct fsi_slave *slave, enum fsi_dev_type type, | |
| dev_t *out_dev, int *out_index) | |
| { | |
| int cid = slave->chip_id; | |
| int id; | |
| /* Check if we qualify for legacy numbering */ | |
| if (cid >= 0 && cid < 16 && type < 4) { | |
| /* | |
| * Try reserving the legacy number, which has 0 - 0x3f reserved | |
| * in the ida range. cid goes up to 0xf and type contains two | |
| * bits, so construct the id with the below two bit shift. | |
| */ | |
| id = (cid << 2) | type; | |
| id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL); | |
| if (id >= 0) { | |
| *out_index = fsi_adjust_index(cid); | |
| *out_dev = fsi_base_dev + id; | |
| return 0; | |
| } | |
| /* Other failure */ | |
| if (id != -ENOSPC) | |
| return id; | |
| /* Fallback to non-legacy allocation */ | |
| } | |
| id = ida_alloc_range(&fsi_minor_ida, FSI_CHAR_LEGACY_TOP, | |
| FSI_CHAR_MAX_DEVICES - 1, GFP_KERNEL); | |
| if (id < 0) | |
| return id; | |
| *out_index = fsi_adjust_index(id); | |
| *out_dev = fsi_base_dev + id; | |
| return 0; | |
| } | |
| static const char *const fsi_dev_type_names[] = { | |
| "cfam", | |
| "sbefifo", | |
| "scom", | |
| "occ", | |
| }; | |
| int fsi_get_new_minor(struct fsi_device *fdev, enum fsi_dev_type type, | |
| dev_t *out_dev, int *out_index) | |
| { | |
| if (fdev->dev.of_node) { | |
| int aid = of_alias_get_id(fdev->dev.of_node, fsi_dev_type_names[type]); | |
| if (aid >= 0) { | |
| /* Use the same scheme as the legacy numbers. */ | |
| int id = (aid << 2) | type; | |
| id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL); | |
| if (id >= 0) { | |
| *out_index = aid; | |
| *out_dev = fsi_base_dev + id; | |
| return 0; | |
| } | |
| if (id != -ENOSPC) | |
| return id; | |
| } | |
| } | |
| return __fsi_get_new_minor(fdev->slave, type, out_dev, out_index); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_get_new_minor); | |
| void fsi_free_minor(dev_t dev) | |
| { | |
| ida_free(&fsi_minor_ida, MINOR(dev)); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_free_minor); | |
| static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) | |
| { | |
| uint32_t cfam_id; | |
| struct fsi_slave *slave; | |
| uint8_t crc; | |
| __be32 data, llmode, slbus; | |
| int rc; | |
| /* Currently, we only support single slaves on a link, and use the | |
| * full 23-bit address range | |
| */ | |
| if (id != 0) | |
| return -EINVAL; | |
| rc = fsi_master_read(master, link, id, 0, &data, sizeof(data)); | |
| if (rc) { | |
| dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n", | |
| link, id, rc); | |
| return -ENODEV; | |
| } | |
| cfam_id = be32_to_cpu(data); | |
| crc = crc4(0, cfam_id, 32); | |
| if (crc) { | |
| trace_fsi_slave_invalid_cfam(master, link, cfam_id); | |
| dev_warn(&master->dev, "slave %02x:%02x invalid cfam id CRC!\n", | |
| link, id); | |
| return -EIO; | |
| } | |
| dev_dbg(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n", | |
| cfam_id, master->idx, link, id); | |
| /* If we're behind a master that doesn't provide a self-running bus | |
| * clock, put the slave into async mode | |
| */ | |
| if (master->flags & FSI_MASTER_FLAG_SWCLOCK) { | |
| llmode = cpu_to_be32(FSI_LLMODE_ASYNC); | |
| rc = fsi_master_write(master, link, id, | |
| FSI_SLAVE_BASE + FSI_LLMODE, | |
| &llmode, sizeof(llmode)); | |
| if (rc) | |
| dev_warn(&master->dev, | |
| "can't set llmode on slave:%02x:%02x %d\n", | |
| link, id, rc); | |
| } | |
| /* We can communicate with a slave; create the slave device and | |
| * register. | |
| */ | |
| slave = kzalloc_obj(*slave); | |
| if (!slave) | |
| return -ENOMEM; | |
| dev_set_name(&slave->dev, "slave@%02x:%02x", link, id); | |
| slave->dev.type = &cfam_type; | |
| slave->dev.parent = &master->dev; | |
| slave->dev.of_node = fsi_slave_find_of_node(master, link, id); | |
| slave->dev.release = fsi_slave_release; | |
| device_initialize(&slave->dev); | |
| slave->cfam_id = cfam_id; | |
| slave->master = master; | |
| slave->link = link; | |
| slave->id = id; | |
| slave->size = FSI_SLAVE_SIZE_23b; | |
| slave->t_send_delay = 16; | |
| slave->t_echo_delay = 16; | |
| /* Get chip ID if any */ | |
| slave->chip_id = -1; | |
| if (slave->dev.of_node) { | |
| uint32_t prop; | |
| if (!of_property_read_u32(slave->dev.of_node, "chip-id", &prop)) | |
| slave->chip_id = prop; | |
| } | |
| slbus = cpu_to_be32(FSI_SLBUS_FORCE); | |
| rc = fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SLBUS, | |
| &slbus, sizeof(slbus)); | |
| if (rc) | |
| dev_warn(&master->dev, | |
| "can't set slbus on slave:%02x:%02x %d\n", link, id, | |
| rc); | |
| rc = fsi_slave_set_smode(slave); | |
| if (rc) { | |
| dev_warn(&master->dev, | |
| "can't set smode on slave:%02x:%02x %d\n", | |
| link, id, rc); | |
| goto err_free; | |
| } | |
| /* Allocate a minor in the FSI space */ | |
| rc = __fsi_get_new_minor(slave, fsi_dev_cfam, &slave->dev.devt, | |
| &slave->cdev_idx); | |
| if (rc) | |
| goto err_free; | |
| trace_fsi_slave_init(slave); | |
| /* Create chardev for userspace access */ | |
| cdev_init(&slave->cdev, &cfam_fops); | |
| rc = cdev_device_add(&slave->cdev, &slave->dev); | |
| if (rc) { | |
| dev_err(&slave->dev, "Error %d creating slave device\n", rc); | |
| goto err_free_ida; | |
| } | |
| /* Now that we have the cdev registered with the core, any fatal | |
| * failures beyond this point will need to clean up through | |
| * cdev_device_del(). Fortunately though, nothing past here is fatal. | |
| */ | |
| if (master->link_config) | |
| master->link_config(master, link, | |
| slave->t_send_delay, | |
| slave->t_echo_delay); | |
| /* Legacy raw file -> to be removed */ | |
| rc = device_create_bin_file(&slave->dev, &fsi_slave_raw_attr); | |
| if (rc) | |
| dev_warn(&slave->dev, "failed to create raw attr: %d\n", rc); | |
| rc = fsi_slave_scan(slave); | |
| if (rc) | |
| dev_dbg(&master->dev, "failed during slave scan with: %d\n", | |
| rc); | |
| return 0; | |
| err_free_ida: | |
| fsi_free_minor(slave->dev.devt); | |
| err_free: | |
| of_node_put(slave->dev.of_node); | |
| kfree(slave); | |
| return rc; | |
| } | |
| /* FSI master support */ | |
| static int fsi_check_access(uint32_t addr, size_t size) | |
| { | |
| if (size == 4) { | |
| if (addr & 0x3) | |
| return -EINVAL; | |
| } else if (size == 2) { | |
| if (addr & 0x1) | |
| return -EINVAL; | |
| } else if (size != 1) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int fsi_master_read(struct fsi_master *master, int link, | |
| uint8_t slave_id, uint32_t addr, void *val, size_t size) | |
| { | |
| int rc; | |
| trace_fsi_master_read(master, link, slave_id, addr, size); | |
| rc = fsi_check_access(addr, size); | |
| if (!rc) | |
| rc = master->read(master, link, slave_id, addr, val, size); | |
| trace_fsi_master_rw_result(master, link, slave_id, addr, size, | |
| false, val, rc); | |
| return rc; | |
| } | |
| static int fsi_master_write(struct fsi_master *master, int link, | |
| uint8_t slave_id, uint32_t addr, const void *val, size_t size) | |
| { | |
| int rc; | |
| trace_fsi_master_write(master, link, slave_id, addr, size, val); | |
| rc = fsi_check_access(addr, size); | |
| if (!rc) | |
| rc = master->write(master, link, slave_id, addr, val, size); | |
| trace_fsi_master_rw_result(master, link, slave_id, addr, size, | |
| true, val, rc); | |
| return rc; | |
| } | |
| static int fsi_master_link_disable(struct fsi_master *master, int link) | |
| { | |
| if (master->link_enable) | |
| return master->link_enable(master, link, false); | |
| return 0; | |
| } | |
| static int fsi_master_link_enable(struct fsi_master *master, int link) | |
| { | |
| if (master->link_enable) | |
| return master->link_enable(master, link, true); | |
| return 0; | |
| } | |
| /* | |
| * Issue a break command on this link | |
| */ | |
| static int fsi_master_break(struct fsi_master *master, int link) | |
| { | |
| int rc = 0; | |
| trace_fsi_master_break(master, link); | |
| if (master->send_break) | |
| rc = master->send_break(master, link); | |
| if (master->link_config) | |
| master->link_config(master, link, 16, 16); | |
| return rc; | |
| } | |
| static int fsi_master_scan(struct fsi_master *master) | |
| { | |
| int link, rc; | |
| trace_fsi_master_scan(master, true); | |
| for (link = 0; link < master->n_links; link++) { | |
| rc = fsi_master_link_enable(master, link); | |
| if (rc) { | |
| dev_dbg(&master->dev, | |
| "enable link %d failed: %d\n", link, rc); | |
| continue; | |
| } | |
| rc = fsi_master_break(master, link); | |
| if (rc) { | |
| fsi_master_link_disable(master, link); | |
| dev_dbg(&master->dev, | |
| "break to link %d failed: %d\n", link, rc); | |
| continue; | |
| } | |
| rc = fsi_slave_init(master, link, 0); | |
| if (rc) | |
| fsi_master_link_disable(master, link); | |
| } | |
| return 0; | |
| } | |
| static int fsi_slave_remove_device(struct device *dev, void *arg) | |
| { | |
| device_unregister(dev); | |
| return 0; | |
| } | |
| static int fsi_master_remove_slave(struct device *dev, void *arg) | |
| { | |
| struct fsi_slave *slave = to_fsi_slave(dev); | |
| device_for_each_child(dev, NULL, fsi_slave_remove_device); | |
| cdev_device_del(&slave->cdev, &slave->dev); | |
| put_device(dev); | |
| return 0; | |
| } | |
| static void fsi_master_unscan(struct fsi_master *master) | |
| { | |
| trace_fsi_master_scan(master, false); | |
| device_for_each_child(&master->dev, NULL, fsi_master_remove_slave); | |
| } | |
| int fsi_master_rescan(struct fsi_master *master) | |
| { | |
| int rc; | |
| mutex_lock(&master->scan_lock); | |
| fsi_master_unscan(master); | |
| rc = fsi_master_scan(master); | |
| mutex_unlock(&master->scan_lock); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_master_rescan); | |
| static ssize_t master_rescan_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct fsi_master *master = to_fsi_master(dev); | |
| int rc; | |
| rc = fsi_master_rescan(master); | |
| if (rc < 0) | |
| return rc; | |
| return count; | |
| } | |
| static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store); | |
| static ssize_t master_break_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct fsi_master *master = to_fsi_master(dev); | |
| fsi_master_break(master, 0); | |
| return count; | |
| } | |
| static DEVICE_ATTR(break, 0200, NULL, master_break_store); | |
| static struct attribute *master_attrs[] = { | |
| &dev_attr_break.attr, | |
| &dev_attr_rescan.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(master); | |
| static struct class fsi_master_class = { | |
| .name = "fsi-master", | |
| .dev_groups = master_groups, | |
| }; | |
| int fsi_master_register(struct fsi_master *master) | |
| { | |
| int rc; | |
| struct device_node *np; | |
| mutex_init(&master->scan_lock); | |
| /* Alloc the requested index if it's non-zero */ | |
| if (master->idx) { | |
| master->idx = ida_alloc_range(&master_ida, master->idx, | |
| master->idx, GFP_KERNEL); | |
| } else { | |
| master->idx = ida_alloc(&master_ida, GFP_KERNEL); | |
| } | |
| if (master->idx < 0) | |
| return master->idx; | |
| if (!dev_name(&master->dev)) | |
| dev_set_name(&master->dev, "fsi%d", master->idx); | |
| master->dev.class = &fsi_master_class; | |
| mutex_lock(&master->scan_lock); | |
| rc = device_register(&master->dev); | |
| if (rc) { | |
| ida_free(&master_ida, master->idx); | |
| goto out; | |
| } | |
| np = dev_of_node(&master->dev); | |
| if (!of_property_read_bool(np, "no-scan-on-init")) { | |
| fsi_master_scan(master); | |
| } | |
| out: | |
| mutex_unlock(&master->scan_lock); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_master_register); | |
| void fsi_master_unregister(struct fsi_master *master) | |
| { | |
| int idx = master->idx; | |
| trace_fsi_master_unregister(master); | |
| mutex_lock(&master->scan_lock); | |
| fsi_master_unscan(master); | |
| master->n_links = 0; | |
| mutex_unlock(&master->scan_lock); | |
| device_unregister(&master->dev); | |
| ida_free(&master_ida, idx); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_master_unregister); | |
| static int fsi_legacy_probe(struct fsi_device *fsidev) | |
| { | |
| struct device *dev = &fsidev->dev; | |
| struct device_driver *driver = dev->driver; | |
| return driver->probe(dev); | |
| } | |
| static void fsi_legacy_remove(struct fsi_device *fsidev) | |
| { | |
| struct device *dev = &fsidev->dev; | |
| struct device_driver *driver = dev->driver; | |
| int ret; | |
| ret = driver->remove(dev); | |
| if (unlikely(ret)) | |
| dev_warn(dev, "Ignoring return value of remove callback (%pe)\n", ERR_PTR(ret)); | |
| } | |
| int fsi_driver_register(struct fsi_driver *fsi_drv) | |
| { | |
| if (!fsi_drv) | |
| return -EINVAL; | |
| if (!fsi_drv->id_table) | |
| return -EINVAL; | |
| fsi_drv->drv.bus = &fsi_bus_type; | |
| /* | |
| * This driver needs updating. Note that driver_register() warns about | |
| * this, so we're not adding another warning here. | |
| */ | |
| if (!fsi_drv->probe && fsi_drv->drv.probe) | |
| fsi_drv->probe = fsi_legacy_probe; | |
| if (!fsi_drv->remove && fsi_drv->drv.remove) | |
| fsi_drv->remove = fsi_legacy_remove; | |
| return driver_register(&fsi_drv->drv); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_driver_register); | |
| void fsi_driver_unregister(struct fsi_driver *fsi_drv) | |
| { | |
| driver_unregister(&fsi_drv->drv); | |
| } | |
| EXPORT_SYMBOL_GPL(fsi_driver_unregister); | |
| static int __init fsi_init(void) | |
| { | |
| int rc; | |
| rc = alloc_chrdev_region(&fsi_base_dev, 0, FSI_CHAR_MAX_DEVICES, "fsi"); | |
| if (rc) | |
| return rc; | |
| rc = bus_register(&fsi_bus_type); | |
| if (rc) | |
| goto fail_bus; | |
| rc = class_register(&fsi_master_class); | |
| if (rc) | |
| goto fail_class; | |
| return 0; | |
| fail_class: | |
| bus_unregister(&fsi_bus_type); | |
| fail_bus: | |
| unregister_chrdev_region(fsi_base_dev, FSI_CHAR_MAX_DEVICES); | |
| return rc; | |
| } | |
| postcore_initcall(fsi_init); | |
| static void fsi_exit(void) | |
| { | |
| class_unregister(&fsi_master_class); | |
| bus_unregister(&fsi_bus_type); | |
| unregister_chrdev_region(fsi_base_dev, FSI_CHAR_MAX_DEVICES); | |
| ida_destroy(&fsi_minor_ida); | |
| } | |
| module_exit(fsi_exit); | |
| module_param(discard_errors, int, 0664); | |
| MODULE_DESCRIPTION("FSI core driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses"); |