| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Common parts of the Xilinx Spartan6 and 7 Series FPGA manager drivers. | |
| * | |
| * Copyright (C) 2017 DENX Software Engineering | |
| * | |
| * Anatolij Gustschin <agust@denx.de> | |
| */ | |
| #include "xilinx-core.h" | |
| #include <linux/delay.h> | |
| #include <linux/fpga/fpga-mgr.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/of.h> | |
| static int get_done_gpio(struct fpga_manager *mgr) | |
| { | |
| struct xilinx_fpga_core *core = mgr->priv; | |
| int ret; | |
| ret = gpiod_get_value(core->done); | |
| if (ret < 0) | |
| dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret); | |
| return ret; | |
| } | |
| static enum fpga_mgr_states xilinx_core_state(struct fpga_manager *mgr) | |
| { | |
| if (!get_done_gpio(mgr)) | |
| return FPGA_MGR_STATE_RESET; | |
| return FPGA_MGR_STATE_UNKNOWN; | |
| } | |
| /** | |
| * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait | |
| * a given delay if the pin is unavailable | |
| * | |
| * @mgr: The FPGA manager object | |
| * @value: Value INIT_B to wait for (1 = asserted = low) | |
| * @alt_udelay: Delay to wait if the INIT_B GPIO is not available | |
| * | |
| * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if | |
| * too much time passed waiting for that. If no INIT_B GPIO is available | |
| * then always return 0. | |
| */ | |
| static int wait_for_init_b(struct fpga_manager *mgr, int value, | |
| unsigned long alt_udelay) | |
| { | |
| struct xilinx_fpga_core *core = mgr->priv; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| if (core->init_b) { | |
| while (time_before(jiffies, timeout)) { | |
| int ret = gpiod_get_value(core->init_b); | |
| if (ret == value) | |
| return 0; | |
| if (ret < 0) { | |
| dev_err(&mgr->dev, | |
| "Error reading INIT_B (%d)\n", ret); | |
| return ret; | |
| } | |
| usleep_range(100, 400); | |
| } | |
| dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n", | |
| value ? "assert" : "deassert"); | |
| return -ETIMEDOUT; | |
| } | |
| udelay(alt_udelay); | |
| return 0; | |
| } | |
| static int xilinx_core_write_init(struct fpga_manager *mgr, | |
| struct fpga_image_info *info, const char *buf, | |
| size_t count) | |
| { | |
| struct xilinx_fpga_core *core = mgr->priv; | |
| int err; | |
| if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { | |
| dev_err(&mgr->dev, "Partial reconfiguration not supported\n"); | |
| return -EINVAL; | |
| } | |
| gpiod_set_value(core->prog_b, 1); | |
| err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */ | |
| if (err) { | |
| gpiod_set_value(core->prog_b, 0); | |
| return err; | |
| } | |
| gpiod_set_value(core->prog_b, 0); | |
| err = wait_for_init_b(mgr, 0, 0); | |
| if (err) | |
| return err; | |
| if (get_done_gpio(mgr)) { | |
| dev_err(&mgr->dev, "Unexpected DONE pin state...\n"); | |
| return -EIO; | |
| } | |
| /* program latency */ | |
| usleep_range(7500, 7600); | |
| return 0; | |
| } | |
| static int xilinx_core_write(struct fpga_manager *mgr, const char *buf, | |
| size_t count) | |
| { | |
| struct xilinx_fpga_core *core = mgr->priv; | |
| return core->write(core, buf, count); | |
| } | |
| static int xilinx_core_write_complete(struct fpga_manager *mgr, | |
| struct fpga_image_info *info) | |
| { | |
| struct xilinx_fpga_core *core = mgr->priv; | |
| unsigned long timeout = | |
| jiffies + usecs_to_jiffies(info->config_complete_timeout_us); | |
| bool expired = false; | |
| int done; | |
| int ret; | |
| const char padding[1] = { 0xff }; | |
| /* | |
| * This loop is carefully written such that if the driver is | |
| * scheduled out for more than 'timeout', we still check for DONE | |
| * before giving up and we apply 8 extra CCLK cycles in all cases. | |
| */ | |
| while (!expired) { | |
| expired = time_after(jiffies, timeout); | |
| done = get_done_gpio(mgr); | |
| if (done < 0) | |
| return done; | |
| ret = core->write(core, padding, sizeof(padding)); | |
| if (ret) | |
| return ret; | |
| if (done) | |
| return 0; | |
| } | |
| if (core->init_b) { | |
| ret = gpiod_get_value(core->init_b); | |
| if (ret < 0) { | |
| dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); | |
| return ret; | |
| } | |
| dev_err(&mgr->dev, | |
| ret ? "CRC error or invalid device\n" : | |
| "Missing sync word or incomplete bitstream\n"); | |
| } else { | |
| dev_err(&mgr->dev, "Timeout after config data transfer\n"); | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| static inline struct gpio_desc * | |
| xilinx_core_devm_gpiod_get(struct device *dev, const char *con_id, | |
| const char *legacy_con_id, enum gpiod_flags flags) | |
| { | |
| struct gpio_desc *desc; | |
| desc = devm_gpiod_get(dev, con_id, flags); | |
| if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT && | |
| of_device_is_compatible(dev->of_node, "xlnx,fpga-slave-serial")) | |
| desc = devm_gpiod_get(dev, legacy_con_id, flags); | |
| return desc; | |
| } | |
| static const struct fpga_manager_ops xilinx_core_ops = { | |
| .state = xilinx_core_state, | |
| .write_init = xilinx_core_write_init, | |
| .write = xilinx_core_write, | |
| .write_complete = xilinx_core_write_complete, | |
| }; | |
| int xilinx_core_probe(struct xilinx_fpga_core *core) | |
| { | |
| struct fpga_manager *mgr; | |
| if (!core || !core->dev || !core->write) | |
| return -EINVAL; | |
| /* PROGRAM_B is active low */ | |
| core->prog_b = xilinx_core_devm_gpiod_get(core->dev, "prog", "prog_b", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(core->prog_b)) | |
| return dev_err_probe(core->dev, PTR_ERR(core->prog_b), | |
| "Failed to get PROGRAM_B gpio\n"); | |
| core->init_b = xilinx_core_devm_gpiod_get(core->dev, "init", "init-b", | |
| GPIOD_IN); | |
| if (IS_ERR(core->init_b)) | |
| return dev_err_probe(core->dev, PTR_ERR(core->init_b), | |
| "Failed to get INIT_B gpio\n"); | |
| core->done = devm_gpiod_get(core->dev, "done", GPIOD_IN); | |
| if (IS_ERR(core->done)) | |
| return dev_err_probe(core->dev, PTR_ERR(core->done), | |
| "Failed to get DONE gpio\n"); | |
| mgr = devm_fpga_mgr_register(core->dev, | |
| "Xilinx Slave Serial FPGA Manager", | |
| &xilinx_core_ops, core); | |
| return PTR_ERR_OR_ZERO(mgr); | |
| } | |
| EXPORT_SYMBOL_GPL(xilinx_core_probe); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); | |
| MODULE_DESCRIPTION("Xilinx 7 Series FPGA manager core"); |