| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Platform driver for the Synopsys DesignWare DMA Controller | |
| * | |
| * Copyright (C) 2007-2008 Atmel Corporation | |
| * Copyright (C) 2010-2011 ST Microelectronics | |
| * Copyright (C) 2013 Intel Corporation | |
| * | |
| * Some parts of this driver are derived from the original dw_dmac. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/clk.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/of.h> | |
| #include <linux/acpi.h> | |
| #include "internal.h" | |
| static int dw_probe(struct platform_device *pdev) | |
| { | |
| const struct dw_dma_chip_pdata *match; | |
| struct dw_dma_chip_pdata *data; | |
| struct dw_dma_chip *chip; | |
| struct device *dev = &pdev->dev; | |
| int ret; | |
| match = device_get_match_data(dev); | |
| if (!match) | |
| return -ENODEV; | |
| data = devm_kmemdup(&pdev->dev, match, sizeof(*match), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| chip->irq = platform_get_irq(pdev, 0); | |
| if (chip->irq < 0) | |
| return chip->irq; | |
| chip->regs = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(chip->regs)) | |
| return PTR_ERR(chip->regs); | |
| ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (ret) | |
| return ret; | |
| if (!data->pdata) | |
| data->pdata = dev_get_platdata(dev); | |
| if (!data->pdata) | |
| data->pdata = dw_dma_parse_dt(pdev); | |
| chip->dev = dev; | |
| chip->id = pdev->id; | |
| chip->pdata = data->pdata; | |
| data->chip = chip; | |
| chip->clk = devm_clk_get_optional(chip->dev, "hclk"); | |
| if (IS_ERR(chip->clk)) | |
| return PTR_ERR(chip->clk); | |
| ret = clk_prepare_enable(chip->clk); | |
| if (ret) | |
| return ret; | |
| pm_runtime_enable(&pdev->dev); | |
| ret = data->probe(chip); | |
| if (ret) | |
| goto err_dw_dma_probe; | |
| platform_set_drvdata(pdev, data); | |
| dw_dma_of_controller_register(chip->dw); | |
| dw_dma_acpi_controller_register(chip->dw); | |
| return 0; | |
| err_dw_dma_probe: | |
| pm_runtime_disable(&pdev->dev); | |
| clk_disable_unprepare(chip->clk); | |
| return ret; | |
| } | |
| static void dw_remove(struct platform_device *pdev) | |
| { | |
| struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev); | |
| struct dw_dma_chip *chip = data->chip; | |
| int ret; | |
| dw_dma_acpi_controller_free(chip->dw); | |
| dw_dma_of_controller_free(chip->dw); | |
| ret = data->remove(chip); | |
| if (ret) | |
| dev_warn(chip->dev, "can't remove device properly: %d\n", ret); | |
| pm_runtime_disable(&pdev->dev); | |
| clk_disable_unprepare(chip->clk); | |
| } | |
| static void dw_shutdown(struct platform_device *pdev) | |
| { | |
| struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev); | |
| struct dw_dma_chip *chip = data->chip; | |
| /* | |
| * We have to call do_dw_dma_disable() to stop any ongoing transfer. On | |
| * some platforms we can't do that since DMA device is powered off. | |
| * Moreover we have no possibility to check if the platform is affected | |
| * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() | |
| * unconditionally. On the other hand we can't use | |
| * pm_runtime_suspended() because runtime PM framework is not fully | |
| * used by the driver. | |
| */ | |
| pm_runtime_get_sync(chip->dev); | |
| do_dw_dma_disable(chip); | |
| pm_runtime_put_sync_suspend(chip->dev); | |
| clk_disable_unprepare(chip->clk); | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id dw_dma_of_id_table[] = { | |
| { .compatible = "snps,dma-spear1340", .data = &dw_dma_chip_pdata }, | |
| { .compatible = "renesas,rzn1-dma", .data = &dw_dma_chip_pdata }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); | |
| #endif | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id dw_dma_acpi_id_table[] = { | |
| { "INTL9C60", (kernel_ulong_t)&dw_dma_chip_pdata }, | |
| { "80862286", (kernel_ulong_t)&dw_dma_chip_pdata }, | |
| { "808622C0", (kernel_ulong_t)&dw_dma_chip_pdata }, | |
| /* Elkhart Lake iDMA 32-bit (PSE DMA) */ | |
| { "80864BB4", (kernel_ulong_t)&xbar_chip_pdata }, | |
| { "80864BB5", (kernel_ulong_t)&xbar_chip_pdata }, | |
| { "80864BB6", (kernel_ulong_t)&xbar_chip_pdata }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); | |
| #endif | |
| static int dw_suspend_late(struct device *dev) | |
| { | |
| struct dw_dma_chip_pdata *data = dev_get_drvdata(dev); | |
| struct dw_dma_chip *chip = data->chip; | |
| do_dw_dma_disable(chip); | |
| clk_disable_unprepare(chip->clk); | |
| return 0; | |
| } | |
| static int dw_resume_early(struct device *dev) | |
| { | |
| struct dw_dma_chip_pdata *data = dev_get_drvdata(dev); | |
| struct dw_dma_chip *chip = data->chip; | |
| int ret; | |
| ret = clk_prepare_enable(chip->clk); | |
| if (ret) | |
| return ret; | |
| return do_dw_dma_enable(chip); | |
| } | |
| static const struct dev_pm_ops dw_dev_pm_ops = { | |
| LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early) | |
| }; | |
| static struct platform_driver dw_driver = { | |
| .probe = dw_probe, | |
| .remove = dw_remove, | |
| .shutdown = dw_shutdown, | |
| .driver = { | |
| .name = "dw_dmac", | |
| .pm = pm_sleep_ptr(&dw_dev_pm_ops), | |
| .of_match_table = of_match_ptr(dw_dma_of_id_table), | |
| .acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table), | |
| }, | |
| }; | |
| static int __init dw_init(void) | |
| { | |
| return platform_driver_register(&dw_driver); | |
| } | |
| subsys_initcall(dw_init); | |
| static void __exit dw_exit(void) | |
| { | |
| platform_driver_unregister(&dw_driver); | |
| } | |
| module_exit(dw_exit); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller platform driver"); |