| // SPDX-License-Identifier: GPL-2.0-only | |
| // | |
| // Copyright (C) 2020-2021 Samuel Holland <samuel@sholland.org> | |
| // | |
| #include <linux/clk.h> | |
| #include <linux/devfreq.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #define MBUS_CR 0x0000 | |
| #define MBUS_CR_GET_DRAM_TYPE(x) (((x) >> 16) & 0x7) | |
| #define MBUS_CR_DRAM_TYPE_DDR2 2 | |
| #define MBUS_CR_DRAM_TYPE_DDR3 3 | |
| #define MBUS_CR_DRAM_TYPE_DDR4 4 | |
| #define MBUS_CR_DRAM_TYPE_LPDDR2 6 | |
| #define MBUS_CR_DRAM_TYPE_LPDDR3 7 | |
| #define MBUS_TMR 0x000c | |
| #define MBUS_TMR_PERIOD(x) ((x) - 1) | |
| #define MBUS_PMU_CFG 0x009c | |
| #define MBUS_PMU_CFG_PERIOD(x) (((x) - 1) << 16) | |
| #define MBUS_PMU_CFG_UNIT (0x3 << 1) | |
| #define MBUS_PMU_CFG_UNIT_B (0x0 << 1) | |
| #define MBUS_PMU_CFG_UNIT_KB (0x1 << 1) | |
| #define MBUS_PMU_CFG_UNIT_MB (0x2 << 1) | |
| #define MBUS_PMU_CFG_ENABLE (0x1 << 0) | |
| #define MBUS_PMU_BWCR(n) (0x00a0 + (0x04 * (n))) | |
| #define MBUS_TOTAL_BWCR MBUS_PMU_BWCR(5) | |
| #define MBUS_TOTAL_BWCR_H616 MBUS_PMU_BWCR(13) | |
| #define MBUS_MDFSCR 0x0100 | |
| #define MBUS_MDFSCR_BUFFER_TIMING (0x1 << 15) | |
| #define MBUS_MDFSCR_PAD_HOLD (0x1 << 13) | |
| #define MBUS_MDFSCR_BYPASS (0x1 << 4) | |
| #define MBUS_MDFSCR_MODE (0x1 << 1) | |
| #define MBUS_MDFSCR_MODE_DFS (0x0 << 1) | |
| #define MBUS_MDFSCR_MODE_CFS (0x1 << 1) | |
| #define MBUS_MDFSCR_START (0x1 << 0) | |
| #define MBUS_MDFSMRMR 0x0108 | |
| #define DRAM_PWRCTL 0x0004 | |
| #define DRAM_PWRCTL_SELFREF_EN (0x1 << 0) | |
| #define DRAM_RFSHTMG 0x0090 | |
| #define DRAM_RFSHTMG_TREFI(x) ((x) << 16) | |
| #define DRAM_RFSHTMG_TRFC(x) ((x) << 0) | |
| #define DRAM_VTFCR 0x00b8 | |
| #define DRAM_VTFCR_VTF_ENABLE (0x3 << 8) | |
| #define DRAM_ODTMAP 0x0120 | |
| #define DRAM_DX_MAX 4 | |
| #define DRAM_DXnGCR0(n) (0x0344 + 0x80 * (n)) | |
| #define DRAM_DXnGCR0_DXODT (0x3 << 4) | |
| #define DRAM_DXnGCR0_DXODT_DYNAMIC (0x0 << 4) | |
| #define DRAM_DXnGCR0_DXODT_ENABLED (0x1 << 4) | |
| #define DRAM_DXnGCR0_DXODT_DISABLED (0x2 << 4) | |
| #define DRAM_DXnGCR0_DXEN (0x1 << 0) | |
| struct sun8i_a33_mbus_variant { | |
| u32 min_dram_divider; | |
| u32 max_dram_divider; | |
| u32 odt_freq_mhz; | |
| }; | |
| struct sun8i_a33_mbus { | |
| const struct sun8i_a33_mbus_variant *variant; | |
| void __iomem *reg_dram; | |
| void __iomem *reg_mbus; | |
| struct clk *clk_bus; | |
| struct clk *clk_dram; | |
| struct clk *clk_mbus; | |
| struct devfreq *devfreq_dram; | |
| struct devfreq_simple_ondemand_data gov_data; | |
| struct devfreq_dev_profile profile; | |
| u32 data_width; | |
| u32 nominal_bw; | |
| u32 odtmap; | |
| u32 tREFI_ns; | |
| u32 tRFC_ns; | |
| unsigned long freq_table[]; | |
| }; | |
| /* | |
| * The unit for this value is (MBUS clock cycles / MBUS_TMR_PERIOD). When | |
| * MBUS_TMR_PERIOD is programmed to match the MBUS clock frequency in MHz, as | |
| * it is during DRAM init and during probe, the resulting unit is microseconds. | |
| */ | |
| static int pmu_period = 50000; | |
| module_param(pmu_period, int, 0644); | |
| MODULE_PARM_DESC(pmu_period, "Bandwidth measurement period (microseconds)"); | |
| static u32 sun8i_a33_mbus_get_peak_bw(struct sun8i_a33_mbus *priv) | |
| { | |
| /* Returns the peak transfer (in KiB) during any single PMU period. */ | |
| return readl_relaxed(priv->reg_mbus + MBUS_TOTAL_BWCR); | |
| } | |
| static void sun8i_a33_mbus_restart_pmu_counters(struct sun8i_a33_mbus *priv) | |
| { | |
| u32 pmu_cfg = MBUS_PMU_CFG_PERIOD(pmu_period) | MBUS_PMU_CFG_UNIT_KB; | |
| /* All PMU counters are cleared on a disable->enable transition. */ | |
| writel_relaxed(pmu_cfg, | |
| priv->reg_mbus + MBUS_PMU_CFG); | |
| writel_relaxed(pmu_cfg | MBUS_PMU_CFG_ENABLE, | |
| priv->reg_mbus + MBUS_PMU_CFG); | |
| } | |
| static void sun8i_a33_mbus_update_nominal_bw(struct sun8i_a33_mbus *priv, | |
| u32 ddr_freq_mhz) | |
| { | |
| /* | |
| * Nominal bandwidth (KiB per PMU period): | |
| * | |
| * DDR transfers microseconds KiB | |
| * ------------- * ------------ * -------- | |
| * microsecond PMU period transfer | |
| */ | |
| priv->nominal_bw = ddr_freq_mhz * pmu_period * priv->data_width / 1024; | |
| } | |
| static int sun8i_a33_mbus_set_dram_freq(struct sun8i_a33_mbus *priv, | |
| unsigned long freq) | |
| { | |
| u32 ddr_freq_mhz = freq / USEC_PER_SEC; /* DDR */ | |
| u32 dram_freq_mhz = ddr_freq_mhz / 2; /* SDR */ | |
| u32 mctl_freq_mhz = dram_freq_mhz / 2; /* HDR */ | |
| u32 dxodt, mdfscr, pwrctl, vtfcr; | |
| u32 i, tREFI_32ck, tRFC_ck; | |
| int ret; | |
| /* The rate change is not effective until the MDFS process runs. */ | |
| ret = clk_set_rate(priv->clk_dram, freq); | |
| if (ret) | |
| return ret; | |
| /* Disable automatic self-refesh and VTF before starting MDFS. */ | |
| pwrctl = readl_relaxed(priv->reg_dram + DRAM_PWRCTL) & | |
| ~DRAM_PWRCTL_SELFREF_EN; | |
| writel_relaxed(pwrctl, priv->reg_dram + DRAM_PWRCTL); | |
| vtfcr = readl_relaxed(priv->reg_dram + DRAM_VTFCR); | |
| writel_relaxed(vtfcr & ~DRAM_VTFCR_VTF_ENABLE, | |
| priv->reg_dram + DRAM_VTFCR); | |
| /* Set up MDFS and enable double buffering for timing registers. */ | |
| mdfscr = MBUS_MDFSCR_MODE_DFS | | |
| MBUS_MDFSCR_BYPASS | | |
| MBUS_MDFSCR_PAD_HOLD | | |
| MBUS_MDFSCR_BUFFER_TIMING; | |
| writel(mdfscr, priv->reg_mbus + MBUS_MDFSCR); | |
| /* Update the buffered copy of RFSHTMG. */ | |
| tREFI_32ck = priv->tREFI_ns * mctl_freq_mhz / 1000 / 32; | |
| tRFC_ck = DIV_ROUND_UP(priv->tRFC_ns * mctl_freq_mhz, 1000); | |
| writel(DRAM_RFSHTMG_TREFI(tREFI_32ck) | DRAM_RFSHTMG_TRFC(tRFC_ck), | |
| priv->reg_dram + DRAM_RFSHTMG); | |
| /* Enable ODT if needed, or disable it to save power. */ | |
| if (priv->odtmap && dram_freq_mhz > priv->variant->odt_freq_mhz) { | |
| dxodt = DRAM_DXnGCR0_DXODT_DYNAMIC; | |
| writel(priv->odtmap, priv->reg_dram + DRAM_ODTMAP); | |
| } else { | |
| dxodt = DRAM_DXnGCR0_DXODT_DISABLED; | |
| writel(0, priv->reg_dram + DRAM_ODTMAP); | |
| } | |
| for (i = 0; i < DRAM_DX_MAX; ++i) { | |
| void __iomem *reg = priv->reg_dram + DRAM_DXnGCR0(i); | |
| writel((readl(reg) & ~DRAM_DXnGCR0_DXODT) | dxodt, reg); | |
| } | |
| dev_dbg(priv->devfreq_dram->dev.parent, | |
| "Setting DRAM to %u MHz, tREFI=%u, tRFC=%u, ODT=%s\n", | |
| dram_freq_mhz, tREFI_32ck, tRFC_ck, | |
| dxodt == DRAM_DXnGCR0_DXODT_DYNAMIC ? "dynamic" : "disabled"); | |
| /* Trigger hardware MDFS. */ | |
| writel(mdfscr | MBUS_MDFSCR_START, priv->reg_mbus + MBUS_MDFSCR); | |
| ret = readl_poll_timeout_atomic(priv->reg_mbus + MBUS_MDFSCR, mdfscr, | |
| !(mdfscr & MBUS_MDFSCR_START), 10, 1000); | |
| if (ret) | |
| return ret; | |
| /* Disable double buffering. */ | |
| writel(0, priv->reg_mbus + MBUS_MDFSCR); | |
| /* Restore VTF configuration. */ | |
| writel_relaxed(vtfcr, priv->reg_dram + DRAM_VTFCR); | |
| /* Enable automatic self-refresh at the lowest frequency only. */ | |
| if (freq == priv->freq_table[0]) | |
| pwrctl |= DRAM_PWRCTL_SELFREF_EN; | |
| writel_relaxed(pwrctl, priv->reg_dram + DRAM_PWRCTL); | |
| sun8i_a33_mbus_restart_pmu_counters(priv); | |
| sun8i_a33_mbus_update_nominal_bw(priv, ddr_freq_mhz); | |
| return 0; | |
| } | |
| static int sun8i_a33_mbus_set_dram_target(struct device *dev, | |
| unsigned long *freq, u32 flags) | |
| { | |
| struct sun8i_a33_mbus *priv = dev_get_drvdata(dev); | |
| struct devfreq *devfreq = priv->devfreq_dram; | |
| struct dev_pm_opp *opp; | |
| int ret; | |
| opp = devfreq_recommended_opp(dev, freq, flags); | |
| if (IS_ERR(opp)) | |
| return PTR_ERR(opp); | |
| dev_pm_opp_put(opp); | |
| if (*freq == devfreq->previous_freq) | |
| return 0; | |
| ret = sun8i_a33_mbus_set_dram_freq(priv, *freq); | |
| if (ret) { | |
| dev_warn(dev, "failed to set DRAM frequency: %d\n", ret); | |
| *freq = devfreq->previous_freq; | |
| } | |
| return ret; | |
| } | |
| static int sun8i_a33_mbus_get_dram_status(struct device *dev, | |
| struct devfreq_dev_status *stat) | |
| { | |
| struct sun8i_a33_mbus *priv = dev_get_drvdata(dev); | |
| stat->busy_time = sun8i_a33_mbus_get_peak_bw(priv); | |
| stat->total_time = priv->nominal_bw; | |
| stat->current_frequency = priv->devfreq_dram->previous_freq; | |
| sun8i_a33_mbus_restart_pmu_counters(priv); | |
| dev_dbg(dev, "Using %lu/%lu (%lu%%) at %lu MHz\n", | |
| stat->busy_time, stat->total_time, | |
| DIV_ROUND_CLOSEST(stat->busy_time * 100, stat->total_time), | |
| stat->current_frequency / USEC_PER_SEC); | |
| return 0; | |
| } | |
| static int sun8i_a33_mbus_hw_init(struct device *dev, | |
| struct sun8i_a33_mbus *priv, | |
| unsigned long ddr_freq) | |
| { | |
| u32 i, mbus_cr, mbus_freq_mhz; | |
| /* Choose tREFI and tRFC to match the configured DRAM type. */ | |
| mbus_cr = readl_relaxed(priv->reg_mbus + MBUS_CR); | |
| switch (MBUS_CR_GET_DRAM_TYPE(mbus_cr)) { | |
| case MBUS_CR_DRAM_TYPE_DDR2: | |
| case MBUS_CR_DRAM_TYPE_DDR3: | |
| case MBUS_CR_DRAM_TYPE_DDR4: | |
| priv->tREFI_ns = 7800; | |
| priv->tRFC_ns = 350; | |
| break; | |
| case MBUS_CR_DRAM_TYPE_LPDDR2: | |
| case MBUS_CR_DRAM_TYPE_LPDDR3: | |
| priv->tREFI_ns = 3900; | |
| priv->tRFC_ns = 210; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* Save ODTMAP so it can be restored when raising the frequency. */ | |
| priv->odtmap = readl_relaxed(priv->reg_dram + DRAM_ODTMAP); | |
| /* Compute the DRAM data bus width by counting enabled DATx8 blocks. */ | |
| for (i = 0; i < DRAM_DX_MAX; ++i) { | |
| void __iomem *reg = priv->reg_dram + DRAM_DXnGCR0(i); | |
| if (!(readl_relaxed(reg) & DRAM_DXnGCR0_DXEN)) | |
| break; | |
| } | |
| priv->data_width = i; | |
| dev_dbg(dev, "Detected %u-bit %sDDRx with%s ODT\n", | |
| priv->data_width * 8, | |
| MBUS_CR_GET_DRAM_TYPE(mbus_cr) > 4 ? "LP" : "", | |
| priv->odtmap ? "" : "out"); | |
| /* Program MBUS_TMR such that the PMU period unit is microseconds. */ | |
| mbus_freq_mhz = clk_get_rate(priv->clk_mbus) / USEC_PER_SEC; | |
| writel_relaxed(MBUS_TMR_PERIOD(mbus_freq_mhz), | |
| priv->reg_mbus + MBUS_TMR); | |
| /* "Master Ready Mask Register" bits must be set or MDFS will block. */ | |
| writel_relaxed(0xffffffff, priv->reg_mbus + MBUS_MDFSMRMR); | |
| sun8i_a33_mbus_restart_pmu_counters(priv); | |
| sun8i_a33_mbus_update_nominal_bw(priv, ddr_freq / USEC_PER_SEC); | |
| return 0; | |
| } | |
| static int __maybe_unused sun8i_a33_mbus_suspend(struct device *dev) | |
| { | |
| struct sun8i_a33_mbus *priv = dev_get_drvdata(dev); | |
| clk_disable_unprepare(priv->clk_bus); | |
| return 0; | |
| } | |
| static int __maybe_unused sun8i_a33_mbus_resume(struct device *dev) | |
| { | |
| struct sun8i_a33_mbus *priv = dev_get_drvdata(dev); | |
| return clk_prepare_enable(priv->clk_bus); | |
| } | |
| static int sun8i_a33_mbus_probe(struct platform_device *pdev) | |
| { | |
| const struct sun8i_a33_mbus_variant *variant; | |
| struct device *dev = &pdev->dev; | |
| struct sun8i_a33_mbus *priv; | |
| unsigned long base_freq; | |
| unsigned int max_state; | |
| const char *err; | |
| int i, ret; | |
| variant = device_get_match_data(dev); | |
| if (!variant) | |
| return -EINVAL; | |
| max_state = variant->max_dram_divider - variant->min_dram_divider + 1; | |
| priv = devm_kzalloc(dev, struct_size(priv, freq_table, max_state), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, priv); | |
| priv->variant = variant; | |
| priv->reg_dram = devm_platform_ioremap_resource_byname(pdev, "dram"); | |
| if (IS_ERR(priv->reg_dram)) | |
| return PTR_ERR(priv->reg_dram); | |
| priv->reg_mbus = devm_platform_ioremap_resource_byname(pdev, "mbus"); | |
| if (IS_ERR(priv->reg_mbus)) | |
| return PTR_ERR(priv->reg_mbus); | |
| priv->clk_bus = devm_clk_get_enabled(dev, "bus"); | |
| if (IS_ERR(priv->clk_bus)) | |
| return dev_err_probe(dev, PTR_ERR(priv->clk_bus), | |
| "failed to get bus clock\n"); | |
| priv->clk_dram = devm_clk_get(dev, "dram"); | |
| if (IS_ERR(priv->clk_dram)) | |
| return dev_err_probe(dev, PTR_ERR(priv->clk_dram), | |
| "failed to get dram clock\n"); | |
| priv->clk_mbus = devm_clk_get(dev, "mbus"); | |
| if (IS_ERR(priv->clk_mbus)) | |
| return dev_err_probe(dev, PTR_ERR(priv->clk_mbus), | |
| "failed to get mbus clock\n"); | |
| /* Lock the DRAM clock rate to keep priv->nominal_bw in sync. */ | |
| ret = devm_clk_rate_exclusive_get(dev, priv->clk_dram); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "failed to lock dram clock rate\n"); | |
| /* Lock the MBUS clock rate to keep MBUS_TMR_PERIOD in sync. */ | |
| ret = devm_clk_rate_exclusive_get(dev, priv->clk_mbus); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "failed to lock mbus clock rate\n"); | |
| priv->gov_data.upthreshold = 10; | |
| priv->gov_data.downdifferential = 5; | |
| priv->profile.initial_freq = clk_get_rate(priv->clk_dram); | |
| priv->profile.polling_ms = 1000; | |
| priv->profile.target = sun8i_a33_mbus_set_dram_target; | |
| priv->profile.get_dev_status = sun8i_a33_mbus_get_dram_status; | |
| priv->profile.freq_table = priv->freq_table; | |
| priv->profile.max_state = max_state; | |
| ret = devm_pm_opp_set_clkname(dev, "dram"); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "failed to add OPP table\n"); | |
| base_freq = clk_get_rate(clk_get_parent(priv->clk_dram)); | |
| for (i = 0; i < max_state; ++i) { | |
| unsigned int div = variant->max_dram_divider - i; | |
| priv->freq_table[i] = base_freq / div; | |
| ret = dev_pm_opp_add(dev, priv->freq_table[i], 0); | |
| if (ret) { | |
| err = "failed to add OPPs\n"; | |
| goto err_remove_opps; | |
| } | |
| } | |
| ret = sun8i_a33_mbus_hw_init(dev, priv, priv->profile.initial_freq); | |
| if (ret) { | |
| err = "failed to init hardware\n"; | |
| goto err_remove_opps; | |
| } | |
| priv->devfreq_dram = devfreq_add_device(dev, &priv->profile, | |
| DEVFREQ_GOV_SIMPLE_ONDEMAND, | |
| &priv->gov_data); | |
| if (IS_ERR(priv->devfreq_dram)) { | |
| ret = PTR_ERR(priv->devfreq_dram); | |
| err = "failed to add devfreq device\n"; | |
| goto err_remove_opps; | |
| } | |
| /* | |
| * This must be set manually after registering the devfreq device, | |
| * because there is no way to select a dynamic OPP as the suspend OPP. | |
| */ | |
| priv->devfreq_dram->suspend_freq = priv->freq_table[0]; | |
| return 0; | |
| err_remove_opps: | |
| dev_pm_opp_remove_all_dynamic(dev); | |
| return dev_err_probe(dev, ret, err); | |
| } | |
| static void sun8i_a33_mbus_remove(struct platform_device *pdev) | |
| { | |
| struct sun8i_a33_mbus *priv = platform_get_drvdata(pdev); | |
| unsigned long initial_freq = priv->profile.initial_freq; | |
| struct device *dev = &pdev->dev; | |
| int ret; | |
| devfreq_remove_device(priv->devfreq_dram); | |
| ret = sun8i_a33_mbus_set_dram_freq(priv, initial_freq); | |
| if (ret) | |
| dev_warn(dev, "failed to restore DRAM frequency: %d\n", ret); | |
| dev_pm_opp_remove_all_dynamic(dev); | |
| } | |
| static const struct sun8i_a33_mbus_variant sun50i_a64_mbus = { | |
| .min_dram_divider = 1, | |
| .max_dram_divider = 4, | |
| .odt_freq_mhz = 400, | |
| }; | |
| static const struct of_device_id sun8i_a33_mbus_of_match[] = { | |
| { .compatible = "allwinner,sun50i-a64-mbus", .data = &sun50i_a64_mbus }, | |
| { .compatible = "allwinner,sun50i-h5-mbus", .data = &sun50i_a64_mbus }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, sun8i_a33_mbus_of_match); | |
| static SIMPLE_DEV_PM_OPS(sun8i_a33_mbus_pm_ops, | |
| sun8i_a33_mbus_suspend, sun8i_a33_mbus_resume); | |
| static struct platform_driver sun8i_a33_mbus_driver = { | |
| .probe = sun8i_a33_mbus_probe, | |
| .remove = sun8i_a33_mbus_remove, | |
| .driver = { | |
| .name = "sun8i-a33-mbus", | |
| .of_match_table = sun8i_a33_mbus_of_match, | |
| .pm = pm_ptr(&sun8i_a33_mbus_pm_ops), | |
| }, | |
| }; | |
| module_platform_driver(sun8i_a33_mbus_driver); | |
| MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); | |
| MODULE_DESCRIPTION("Allwinner sun8i/sun50i MBUS DEVFREQ Driver"); | |
| MODULE_LICENSE("GPL v2"); |