| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de> | |
| * Copyright (C) 2021 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de> | |
| * Copyright 2024-2025 NXP | |
| */ | |
| #define pr_fmt(fmt) "caam blob_gen: " fmt | |
| #include <linux/bitfield.h> | |
| #include <linux/device.h> | |
| #include <keys/trusted-type.h> | |
| #include <soc/fsl/caam-blob.h> | |
| #include "compat.h" | |
| #include "desc_constr.h" | |
| #include "desc.h" | |
| #include "error.h" | |
| #include "intern.h" | |
| #include "jr.h" | |
| #include "regs.h" | |
| #define CAAM_BLOB_DESC_BYTES_MAX \ | |
| /* Command to initialize & stating length of descriptor */ \ | |
| (CAAM_CMD_SZ + \ | |
| /* Command to append the key-modifier + key-modifier data */ \ | |
| CAAM_CMD_SZ + CAAM_BLOB_KEYMOD_LENGTH + \ | |
| /* Command to include input key + pointer to the input key */ \ | |
| CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \ | |
| /* Command to include output key + pointer to the output key */ \ | |
| CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \ | |
| /* Command describing the operation to perform */ \ | |
| CAAM_CMD_SZ) | |
| struct caam_blob_priv { | |
| struct device jrdev; | |
| }; | |
| struct caam_blob_job_result { | |
| int err; | |
| struct completion completion; | |
| }; | |
| static void caam_blob_job_done(struct device *dev, u32 *desc, u32 err, void *context) | |
| { | |
| struct caam_blob_job_result *res = context; | |
| int ecode = 0; | |
| dev_dbg(dev, "%s %d: err 0x%x\n", __func__, __LINE__, err); | |
| if (err) | |
| ecode = caam_jr_strstatus(dev, err); | |
| res->err = ecode; | |
| /* | |
| * Upon completion, desc points to a buffer containing a CAAM job | |
| * descriptor which encapsulates data into an externally-storable | |
| * blob. | |
| */ | |
| complete(&res->completion); | |
| } | |
| static u32 check_caam_state(struct device *jrdev) | |
| { | |
| const struct caam_drv_private *ctrlpriv; | |
| ctrlpriv = dev_get_drvdata(jrdev->parent); | |
| return FIELD_GET(CSTA_MOO, rd_reg32(&ctrlpriv->jr[0]->perfmon.status)); | |
| } | |
| int caam_process_blob(struct caam_blob_priv *priv, | |
| struct caam_blob_info *info, bool encap) | |
| { | |
| struct caam_blob_job_result testres; | |
| struct device *jrdev = &priv->jrdev; | |
| dma_addr_t dma_in, dma_out; | |
| int op = OP_PCLID_BLOB; | |
| int hwbk_caam_ovhd = 0; | |
| size_t output_len; | |
| u32 *desc; | |
| u32 moo; | |
| int ret; | |
| int len; | |
| if (info->key_mod_len > CAAM_BLOB_KEYMOD_LENGTH) | |
| return -EINVAL; | |
| if (encap) { | |
| op |= OP_TYPE_ENCAP_PROTOCOL; | |
| output_len = info->input_len + CAAM_BLOB_OVERHEAD; | |
| } else { | |
| op |= OP_TYPE_DECAP_PROTOCOL; | |
| output_len = info->input_len - CAAM_BLOB_OVERHEAD; | |
| info->output_len = output_len; | |
| } | |
| if (encap && info->pkey_info.is_pkey) { | |
| op |= OP_PCL_BLOB_BLACK; | |
| if (info->pkey_info.key_enc_algo == CAAM_ENC_ALGO_CCM) { | |
| op |= OP_PCL_BLOB_EKT; | |
| hwbk_caam_ovhd = CAAM_CCM_OVERHEAD; | |
| } | |
| if ((info->input_len + hwbk_caam_ovhd) > MAX_KEY_SIZE) | |
| return -EINVAL; | |
| len = info->input_len + hwbk_caam_ovhd; | |
| } else { | |
| len = info->input_len; | |
| } | |
| desc = kzalloc(CAAM_BLOB_DESC_BYTES_MAX, GFP_KERNEL); | |
| if (!desc) | |
| return -ENOMEM; | |
| dma_in = dma_map_single(jrdev, info->input, len, | |
| encap ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); | |
| if (dma_mapping_error(jrdev, dma_in)) { | |
| dev_err(jrdev, "unable to map input DMA buffer\n"); | |
| ret = -ENOMEM; | |
| goto out_free; | |
| } | |
| dma_out = dma_map_single(jrdev, info->output, output_len, | |
| DMA_FROM_DEVICE); | |
| if (dma_mapping_error(jrdev, dma_out)) { | |
| dev_err(jrdev, "unable to map output DMA buffer\n"); | |
| ret = -ENOMEM; | |
| goto out_unmap_in; | |
| } | |
| moo = check_caam_state(jrdev); | |
| if (moo != CSTA_MOO_SECURE && moo != CSTA_MOO_TRUSTED) | |
| dev_warn(jrdev, | |
| "using insecure test key, enable HAB to use unique device key!\n"); | |
| /* | |
| * A data blob is encrypted using a blob key (BK); a random number. | |
| * The BK is used as an AES-CCM key. The initial block (B0) and the | |
| * initial counter (Ctr0) are generated automatically and stored in | |
| * Class 1 Context DWords 0+1+2+3. The random BK is stored in the | |
| * Class 1 Key Register. Operation Mode is set to AES-CCM. | |
| */ | |
| init_job_desc(desc, 0); | |
| if (encap && info->pkey_info.is_pkey) { | |
| /*!1. key command used to load class 1 key register | |
| * from input plain key. | |
| */ | |
| append_key(desc, dma_in, info->input_len, | |
| CLASS_1 | KEY_DEST_CLASS_REG); | |
| /*!2. Fifostore to store protected key from class 1 key register. */ | |
| if (info->pkey_info.key_enc_algo == CAAM_ENC_ALGO_CCM) { | |
| append_fifo_store(desc, dma_in, info->input_len, | |
| LDST_CLASS_1_CCB | | |
| FIFOST_TYPE_KEY_CCM_JKEK); | |
| } else { | |
| append_fifo_store(desc, dma_in, info->input_len, | |
| LDST_CLASS_1_CCB | | |
| FIFOST_TYPE_KEY_KEK); | |
| } | |
| /* | |
| * JUMP_OFFSET specifies the offset of the JUMP target from | |
| * the JUMP command's address in the descriptor buffer. | |
| */ | |
| append_jump(desc, JUMP_COND_NOP | BIT(0) << JUMP_OFFSET_SHIFT); | |
| } | |
| /*!3. Load class 2 key with key modifier. */ | |
| append_key_as_imm(desc, info->key_mod, info->key_mod_len, | |
| info->key_mod_len, CLASS_2 | KEY_DEST_CLASS_REG); | |
| /*!4. SEQ IN PTR Command. */ | |
| append_seq_in_ptr(desc, dma_in, info->input_len, 0); | |
| /*!5. SEQ OUT PTR Command. */ | |
| append_seq_out_ptr(desc, dma_out, output_len, 0); | |
| /*!6. Blob encapsulation/decapsulation PROTOCOL Command. */ | |
| append_operation(desc, op); | |
| print_hex_dump_debug("data@" __stringify(__LINE__)": ", | |
| DUMP_PREFIX_ADDRESS, 16, 1, info->input, | |
| len, false); | |
| print_hex_dump_debug("jobdesc@" __stringify(__LINE__)": ", | |
| DUMP_PREFIX_ADDRESS, 16, 1, desc, | |
| desc_bytes(desc), false); | |
| testres.err = 0; | |
| init_completion(&testres.completion); | |
| ret = caam_jr_enqueue(jrdev, desc, caam_blob_job_done, &testres); | |
| if (ret == -EINPROGRESS) { | |
| wait_for_completion(&testres.completion); | |
| ret = testres.err; | |
| print_hex_dump_debug("output@" __stringify(__LINE__)": ", | |
| DUMP_PREFIX_ADDRESS, 16, 1, info->output, | |
| output_len, false); | |
| } | |
| if (ret == 0) | |
| info->output_len = output_len; | |
| dma_unmap_single(jrdev, dma_out, output_len, DMA_FROM_DEVICE); | |
| out_unmap_in: | |
| dma_unmap_single(jrdev, dma_in, len, | |
| encap ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); | |
| out_free: | |
| kfree(desc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(caam_process_blob); | |
| struct caam_blob_priv *caam_blob_gen_init(void) | |
| { | |
| struct caam_drv_private *ctrlpriv; | |
| struct device *jrdev; | |
| /* | |
| * caam_blob_gen_init() may expectedly fail with -ENODEV, e.g. when | |
| * CAAM driver didn't probe or when SoC lacks BLOB support. An | |
| * error would be harsh in this case, so we stick to info level. | |
| */ | |
| jrdev = caam_jr_alloc(); | |
| if (IS_ERR(jrdev)) { | |
| pr_info("job ring requested, but none currently available\n"); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| ctrlpriv = dev_get_drvdata(jrdev->parent); | |
| if (!ctrlpriv->blob_present) { | |
| dev_info(jrdev, "no hardware blob generation support\n"); | |
| caam_jr_free(jrdev); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| return container_of(jrdev, struct caam_blob_priv, jrdev); | |
| } | |
| EXPORT_SYMBOL(caam_blob_gen_init); | |
| void caam_blob_gen_exit(struct caam_blob_priv *priv) | |
| { | |
| caam_jr_free(&priv->jrdev); | |
| } | |
| EXPORT_SYMBOL(caam_blob_gen_exit); |