| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * (c) 2003-2012 Advanced Micro Devices, Inc. | |
| * | |
| * Maintainer: | |
| * Andreas Herrmann <herrmann.der.user@googlemail.com> | |
| * | |
| * Based on the powernow-k7.c module written by Dave Jones. | |
| * (C) 2003 Dave Jones on behalf of SuSE Labs | |
| * (C) 2004 Dominik Brodowski <linux@brodo.de> | |
| * (C) 2004 Pavel Machek <pavel@ucw.cz> | |
| * Based upon datasheets & sample CPUs kindly provided by AMD. | |
| * | |
| * Valuable input gratefully received from Dave Jones, Pavel Machek, | |
| * Dominik Brodowski, Jacob Shin, and others. | |
| * Originally developed by Paul Devriendt. | |
| * | |
| * Processor information obtained from Chapter 9 (Power and Thermal | |
| * Management) of the "BIOS and Kernel Developer's Guide (BKDG) for | |
| * the AMD Athlon 64 and AMD Opteron Processors" and section "2.x | |
| * Power Management" in BKDGs for newer AMD CPU families. | |
| * | |
| * Tables for specific CPUs can be inferred from AMD's processor | |
| * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf) | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/smp.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/slab.h> | |
| #include <linux/string.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <asm/msr.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/cpuid/api.h> | |
| #include <linux/acpi.h> | |
| #include <linux/mutex.h> | |
| #include <acpi/processor.h> | |
| #define VERSION "version 2.20.00" | |
| #include "powernow-k8.h" | |
| /* serialize freq changes */ | |
| static DEFINE_MUTEX(fidvid_mutex); | |
| static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); | |
| static struct cpufreq_driver cpufreq_amd64_driver; | |
| /* Return a frequency in MHz, given an input fid */ | |
| static u32 find_freq_from_fid(u32 fid) | |
| { | |
| return 800 + (fid * 100); | |
| } | |
| /* Return a frequency in KHz, given an input fid */ | |
| static u32 find_khz_freq_from_fid(u32 fid) | |
| { | |
| return 1000 * find_freq_from_fid(fid); | |
| } | |
| /* Return the vco fid for an input fid | |
| * | |
| * Each "low" fid has corresponding "high" fid, and you can get to "low" fids | |
| * only from corresponding high fids. This returns "high" fid corresponding to | |
| * "low" one. | |
| */ | |
| static u32 convert_fid_to_vco_fid(u32 fid) | |
| { | |
| if (fid < HI_FID_TABLE_BOTTOM) | |
| return 8 + (2 * fid); | |
| else | |
| return fid; | |
| } | |
| /* | |
| * Return 1 if the pending bit is set. Unless we just instructed the processor | |
| * to transition to a new state, seeing this bit set is really bad news. | |
| */ | |
| static int pending_bit_stuck(void) | |
| { | |
| u64 msr; | |
| rdmsrq(MSR_FIDVID_STATUS, msr); | |
| return msr & MSR_S_LO_CHANGE_PENDING ? 1 : 0; | |
| } | |
| /* | |
| * Update the global current fid / vid values from the status msr. | |
| * Returns 1 on error. | |
| */ | |
| static int query_current_values_with_pending_wait(struct powernow_k8_data *data) | |
| { | |
| struct msr msr; | |
| u32 i = 0; | |
| do { | |
| if (i++ > 10000) { | |
| pr_debug("detected change pending stuck\n"); | |
| return 1; | |
| } | |
| rdmsrq(MSR_FIDVID_STATUS, msr.q); | |
| } while (msr.l & MSR_S_LO_CHANGE_PENDING); | |
| data->currvid = msr.h & MSR_S_HI_CURRENT_VID; | |
| data->currfid = msr.l & MSR_S_LO_CURRENT_FID; | |
| return 0; | |
| } | |
| /* the isochronous relief time */ | |
| static void count_off_irt(struct powernow_k8_data *data) | |
| { | |
| udelay((1 << data->irt) * 10); | |
| } | |
| /* the voltage stabilization time */ | |
| static void count_off_vst(struct powernow_k8_data *data) | |
| { | |
| udelay(data->vstable * VST_UNITS_20US); | |
| } | |
| /* need to init the control msr to a safe value (for each cpu) */ | |
| static void fidvid_msr_init(void) | |
| { | |
| struct msr msr; | |
| u8 fid, vid; | |
| rdmsrq(MSR_FIDVID_STATUS, msr.q); | |
| vid = msr.h & MSR_S_HI_CURRENT_VID; | |
| fid = msr.l & MSR_S_LO_CURRENT_FID; | |
| msr.l = fid | (vid << MSR_C_LO_VID_SHIFT); | |
| msr.h = MSR_C_HI_STP_GNT_BENIGN; | |
| pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), msr.l, msr.h); | |
| wrmsrq(MSR_FIDVID_CTL, msr.q); | |
| } | |
| /* write the new fid value along with the other control fields to the msr */ | |
| static int write_new_fid(struct powernow_k8_data *data, u32 fid) | |
| { | |
| struct msr msr; | |
| u32 savevid = data->currvid; | |
| u32 i = 0; | |
| if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { | |
| pr_err("internal error - overflow on fid write\n"); | |
| return 1; | |
| } | |
| msr.l = fid; | |
| msr.l |= (data->currvid << MSR_C_LO_VID_SHIFT); | |
| msr.l |= MSR_C_LO_INIT_FID_VID; | |
| msr.h = data->plllock * PLL_LOCK_CONVERSION; | |
| pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n", fid, msr.l, msr.h); | |
| do { | |
| wrmsrq(MSR_FIDVID_CTL, msr.q); | |
| if (i++ > 100) { | |
| pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n"); | |
| return 1; | |
| } | |
| } while (query_current_values_with_pending_wait(data)); | |
| count_off_irt(data); | |
| if (savevid != data->currvid) { | |
| pr_err("vid change on fid trans, old 0x%x, new 0x%x\n", | |
| savevid, data->currvid); | |
| return 1; | |
| } | |
| if (fid != data->currfid) { | |
| pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid, | |
| data->currfid); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* Write a new vid to the hardware */ | |
| static int write_new_vid(struct powernow_k8_data *data, u32 vid) | |
| { | |
| struct msr msr; | |
| u32 savefid = data->currfid; | |
| int i = 0; | |
| if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { | |
| pr_err("internal error - overflow on vid write\n"); | |
| return 1; | |
| } | |
| msr.l = data->currfid; | |
| msr.l |= (vid << MSR_C_LO_VID_SHIFT); | |
| msr.l |= MSR_C_LO_INIT_FID_VID; | |
| msr.h = STOP_GRANT_5NS; | |
| pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n", vid, msr.l, msr.h); | |
| do { | |
| wrmsrq(MSR_FIDVID_CTL, msr.q); | |
| if (i++ > 100) { | |
| pr_err("internal error - pending bit very stuck - no further pstate changes possible\n"); | |
| return 1; | |
| } | |
| } while (query_current_values_with_pending_wait(data)); | |
| if (savefid != data->currfid) { | |
| pr_err("fid changed on vid trans, old 0x%x new 0x%x\n", | |
| savefid, data->currfid); | |
| return 1; | |
| } | |
| if (vid != data->currvid) { | |
| pr_err("vid trans failed, vid 0x%x, curr 0x%x\n", | |
| vid, data->currvid); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Reduce the vid by the max of step or reqvid. | |
| * Decreasing vid codes represent increasing voltages: | |
| * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. | |
| */ | |
| static int decrease_vid_code_by_step(struct powernow_k8_data *data, | |
| u32 reqvid, u32 step) | |
| { | |
| if ((data->currvid - reqvid) > step) | |
| reqvid = data->currvid - step; | |
| if (write_new_vid(data, reqvid)) | |
| return 1; | |
| count_off_vst(data); | |
| return 0; | |
| } | |
| /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ | |
| static int transition_fid_vid(struct powernow_k8_data *data, | |
| u32 reqfid, u32 reqvid) | |
| { | |
| if (core_voltage_pre_transition(data, reqvid, reqfid)) | |
| return 1; | |
| if (core_frequency_transition(data, reqfid)) | |
| return 1; | |
| if (core_voltage_post_transition(data, reqvid)) | |
| return 1; | |
| if (query_current_values_with_pending_wait(data)) | |
| return 1; | |
| if ((reqfid != data->currfid) || (reqvid != data->currvid)) { | |
| pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", | |
| smp_processor_id(), | |
| reqfid, reqvid, data->currfid, data->currvid); | |
| return 1; | |
| } | |
| pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", | |
| smp_processor_id(), data->currfid, data->currvid); | |
| return 0; | |
| } | |
| /* Phase 1 - core voltage transition ... setup voltage */ | |
| static int core_voltage_pre_transition(struct powernow_k8_data *data, | |
| u32 reqvid, u32 reqfid) | |
| { | |
| struct msr msr; | |
| u32 rvosteps = data->rvo; | |
| u32 savefid = data->currfid; | |
| u32 maxvid, rvomult = 1; | |
| pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", | |
| smp_processor_id(), | |
| data->currfid, data->currvid, reqvid, data->rvo); | |
| if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) | |
| rvomult = 2; | |
| rvosteps *= rvomult; | |
| rdmsrq(MSR_FIDVID_STATUS, msr.q); | |
| maxvid = 0x1f & (msr.h >> 16); | |
| pr_debug("ph1 maxvid=0x%x\n", maxvid); | |
| if (reqvid < maxvid) /* lower numbers are higher voltages */ | |
| reqvid = maxvid; | |
| while (data->currvid > reqvid) { | |
| pr_debug("ph1: curr 0x%x, req vid 0x%x\n", | |
| data->currvid, reqvid); | |
| if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) | |
| return 1; | |
| } | |
| while ((rvosteps > 0) && | |
| ((rvomult * data->rvo + data->currvid) > reqvid)) { | |
| if (data->currvid == maxvid) { | |
| rvosteps = 0; | |
| } else { | |
| pr_debug("ph1: changing vid for rvo, req 0x%x\n", | |
| data->currvid - 1); | |
| if (decrease_vid_code_by_step(data, data->currvid-1, 1)) | |
| return 1; | |
| rvosteps--; | |
| } | |
| } | |
| if (query_current_values_with_pending_wait(data)) | |
| return 1; | |
| if (savefid != data->currfid) { | |
| pr_err("ph1 err, currfid changed 0x%x\n", data->currfid); | |
| return 1; | |
| } | |
| pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n", | |
| data->currfid, data->currvid); | |
| return 0; | |
| } | |
| /* Phase 2 - core frequency transition */ | |
| static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) | |
| { | |
| u32 vcoreqfid, vcocurrfid, vcofiddiff; | |
| u32 fid_interval, savevid = data->currvid; | |
| if (data->currfid == reqfid) { | |
| pr_err("ph2 null fid transition 0x%x\n", data->currfid); | |
| return 0; | |
| } | |
| pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", | |
| smp_processor_id(), | |
| data->currfid, data->currvid, reqfid); | |
| vcoreqfid = convert_fid_to_vco_fid(reqfid); | |
| vcocurrfid = convert_fid_to_vco_fid(data->currfid); | |
| vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid | |
| : vcoreqfid - vcocurrfid; | |
| if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) | |
| vcofiddiff = 0; | |
| while (vcofiddiff > 2) { | |
| (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); | |
| if (reqfid > data->currfid) { | |
| if (data->currfid > LO_FID_TABLE_TOP) { | |
| if (write_new_fid(data, | |
| data->currfid + fid_interval)) | |
| return 1; | |
| } else { | |
| if (write_new_fid | |
| (data, | |
| 2 + convert_fid_to_vco_fid(data->currfid))) | |
| return 1; | |
| } | |
| } else { | |
| if (write_new_fid(data, data->currfid - fid_interval)) | |
| return 1; | |
| } | |
| vcocurrfid = convert_fid_to_vco_fid(data->currfid); | |
| vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid | |
| : vcoreqfid - vcocurrfid; | |
| } | |
| if (write_new_fid(data, reqfid)) | |
| return 1; | |
| if (query_current_values_with_pending_wait(data)) | |
| return 1; | |
| if (data->currfid != reqfid) { | |
| pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", | |
| data->currfid, reqfid); | |
| return 1; | |
| } | |
| if (savevid != data->currvid) { | |
| pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n", | |
| savevid, data->currvid); | |
| return 1; | |
| } | |
| pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n", | |
| data->currfid, data->currvid); | |
| return 0; | |
| } | |
| /* Phase 3 - core voltage transition flow ... jump to the final vid. */ | |
| static int core_voltage_post_transition(struct powernow_k8_data *data, | |
| u32 reqvid) | |
| { | |
| u32 savefid = data->currfid; | |
| u32 savereqvid = reqvid; | |
| pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", | |
| smp_processor_id(), | |
| data->currfid, data->currvid); | |
| if (reqvid != data->currvid) { | |
| if (write_new_vid(data, reqvid)) | |
| return 1; | |
| if (savefid != data->currfid) { | |
| pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n", | |
| savefid, data->currfid); | |
| return 1; | |
| } | |
| if (data->currvid != reqvid) { | |
| pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x", | |
| reqvid, data->currvid); | |
| return 1; | |
| } | |
| } | |
| if (query_current_values_with_pending_wait(data)) | |
| return 1; | |
| if (savereqvid != data->currvid) { | |
| pr_debug("ph3 failed, currvid 0x%x\n", data->currvid); | |
| return 1; | |
| } | |
| if (savefid != data->currfid) { | |
| pr_debug("ph3 failed, currfid changed 0x%x\n", | |
| data->currfid); | |
| return 1; | |
| } | |
| pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n", | |
| data->currfid, data->currvid); | |
| return 0; | |
| } | |
| static const struct x86_cpu_id powernow_k8_ids[] = { | |
| /* IO based frequency switching */ | |
| X86_MATCH_VENDOR_FAM(AMD, 0xf, NULL), | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids); | |
| static void check_supported_cpu(void *_rc) | |
| { | |
| u32 eax, ebx, ecx, edx; | |
| int *rc = _rc; | |
| *rc = -ENODEV; | |
| eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); | |
| if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { | |
| if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || | |
| ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { | |
| pr_info("Processor cpuid %x not supported\n", eax); | |
| return; | |
| } | |
| eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); | |
| if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { | |
| pr_info("No frequency change capabilities detected\n"); | |
| return; | |
| } | |
| cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); | |
| if ((edx & P_STATE_TRANSITION_CAPABLE) | |
| != P_STATE_TRANSITION_CAPABLE) { | |
| pr_info_once("Power state transitions not supported\n"); | |
| return; | |
| } | |
| *rc = 0; | |
| } | |
| } | |
| static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, | |
| u8 maxvid) | |
| { | |
| unsigned int j; | |
| u8 lastfid = 0xff; | |
| for (j = 0; j < data->numps; j++) { | |
| if (pst[j].vid > LEAST_VID) { | |
| pr_err(FW_BUG "vid %d invalid : 0x%x\n", j, | |
| pst[j].vid); | |
| return -EINVAL; | |
| } | |
| if (pst[j].vid < data->rvo) { | |
| /* vid + rvo >= 0 */ | |
| pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j); | |
| return -ENODEV; | |
| } | |
| if (pst[j].vid < maxvid + data->rvo) { | |
| /* vid + rvo >= maxvid */ | |
| pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j); | |
| return -ENODEV; | |
| } | |
| if (pst[j].fid > MAX_FID) { | |
| pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j); | |
| return -ENODEV; | |
| } | |
| if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { | |
| /* Only first fid is allowed to be in "low" range */ | |
| pr_err(FW_BUG "two low fids - %d : 0x%x\n", j, | |
| pst[j].fid); | |
| return -EINVAL; | |
| } | |
| if (pst[j].fid < lastfid) | |
| lastfid = pst[j].fid; | |
| } | |
| if (lastfid & 1) { | |
| pr_err(FW_BUG "lastfid invalid\n"); | |
| return -EINVAL; | |
| } | |
| if (lastfid > LO_FID_TABLE_TOP) | |
| pr_info(FW_BUG "first fid not from lo freq table\n"); | |
| return 0; | |
| } | |
| static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, | |
| unsigned int entry) | |
| { | |
| powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; | |
| } | |
| static void print_basics(struct powernow_k8_data *data) | |
| { | |
| int j; | |
| for (j = 0; j < data->numps; j++) { | |
| if (data->powernow_table[j].frequency != | |
| CPUFREQ_ENTRY_INVALID) { | |
| pr_info("fid 0x%x (%d MHz), vid 0x%x\n", | |
| data->powernow_table[j].driver_data & 0xff, | |
| data->powernow_table[j].frequency/1000, | |
| data->powernow_table[j].driver_data >> 8); | |
| } | |
| } | |
| if (data->batps) | |
| pr_info("Only %d pstates on battery\n", data->batps); | |
| } | |
| static int fill_powernow_table(struct powernow_k8_data *data, | |
| struct pst_s *pst, u8 maxvid) | |
| { | |
| struct cpufreq_frequency_table *powernow_table; | |
| unsigned int j; | |
| if (data->batps) { | |
| /* use ACPI support to get full speed on mains power */ | |
| pr_warn("Only %d pstates usable (use ACPI driver for full range\n", | |
| data->batps); | |
| data->numps = data->batps; | |
| } | |
| for (j = 1; j < data->numps; j++) { | |
| if (pst[j-1].fid >= pst[j].fid) { | |
| pr_err("PST out of sequence\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (data->numps < 2) { | |
| pr_err("no p states to transition\n"); | |
| return -ENODEV; | |
| } | |
| if (check_pst_table(data, pst, maxvid)) | |
| return -EINVAL; | |
| powernow_table = kzalloc((sizeof(*powernow_table) | |
| * (data->numps + 1)), GFP_KERNEL); | |
| if (!powernow_table) | |
| return -ENOMEM; | |
| for (j = 0; j < data->numps; j++) { | |
| int freq; | |
| powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ | |
| powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ | |
| freq = find_khz_freq_from_fid(pst[j].fid); | |
| powernow_table[j].frequency = freq; | |
| } | |
| powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; | |
| powernow_table[data->numps].driver_data = 0; | |
| if (query_current_values_with_pending_wait(data)) { | |
| kfree(powernow_table); | |
| return -EIO; | |
| } | |
| pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); | |
| data->powernow_table = powernow_table; | |
| if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu) | |
| print_basics(data); | |
| for (j = 0; j < data->numps; j++) | |
| if ((pst[j].fid == data->currfid) && | |
| (pst[j].vid == data->currvid)) | |
| return 0; | |
| pr_debug("currfid/vid do not match PST, ignoring\n"); | |
| return 0; | |
| } | |
| /* Find and validate the PSB/PST table in BIOS. */ | |
| static int find_psb_table(struct powernow_k8_data *data) | |
| { | |
| struct psb_s *psb; | |
| unsigned int i; | |
| u32 mvs; | |
| u8 maxvid; | |
| u32 cpst = 0; | |
| u32 thiscpuid; | |
| for (i = 0xc0000; i < 0xffff0; i += 0x10) { | |
| /* Scan BIOS looking for the signature. */ | |
| /* It can not be at ffff0 - it is too big. */ | |
| psb = phys_to_virt(i); | |
| if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) | |
| continue; | |
| pr_debug("found PSB header at 0x%p\n", psb); | |
| pr_debug("table vers: 0x%x\n", psb->tableversion); | |
| if (psb->tableversion != PSB_VERSION_1_4) { | |
| pr_err(FW_BUG "PSB table is not v1.4\n"); | |
| return -ENODEV; | |
| } | |
| pr_debug("flags: 0x%x\n", psb->flags1); | |
| if (psb->flags1) { | |
| pr_err(FW_BUG "unknown flags\n"); | |
| return -ENODEV; | |
| } | |
| data->vstable = psb->vstable; | |
| pr_debug("voltage stabilization time: %d(*20us)\n", | |
| data->vstable); | |
| pr_debug("flags2: 0x%x\n", psb->flags2); | |
| data->rvo = psb->flags2 & 3; | |
| data->irt = ((psb->flags2) >> 2) & 3; | |
| mvs = ((psb->flags2) >> 4) & 3; | |
| data->vidmvs = 1 << mvs; | |
| data->batps = ((psb->flags2) >> 6) & 3; | |
| pr_debug("ramp voltage offset: %d\n", data->rvo); | |
| pr_debug("isochronous relief time: %d\n", data->irt); | |
| pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); | |
| pr_debug("numpst: 0x%x\n", psb->num_tables); | |
| cpst = psb->num_tables; | |
| if ((psb->cpuid == 0x00000fc0) || | |
| (psb->cpuid == 0x00000fe0)) { | |
| thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); | |
| if ((thiscpuid == 0x00000fc0) || | |
| (thiscpuid == 0x00000fe0)) | |
| cpst = 1; | |
| } | |
| if (cpst != 1) { | |
| pr_err(FW_BUG "numpst must be 1\n"); | |
| return -ENODEV; | |
| } | |
| data->plllock = psb->plllocktime; | |
| pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); | |
| pr_debug("maxfid: 0x%x\n", psb->maxfid); | |
| pr_debug("maxvid: 0x%x\n", psb->maxvid); | |
| maxvid = psb->maxvid; | |
| data->numps = psb->numps; | |
| pr_debug("numpstates: 0x%x\n", data->numps); | |
| return fill_powernow_table(data, | |
| (struct pst_s *)(psb+1), maxvid); | |
| } | |
| /* | |
| * If you see this message, complain to BIOS manufacturer. If | |
| * he tells you "we do not support Linux" or some similar | |
| * nonsense, remember that Windows 2000 uses the same legacy | |
| * mechanism that the old Linux PSB driver uses. Tell them it | |
| * is broken with Windows 2000. | |
| * | |
| * The reference to the AMD documentation is chapter 9 in the | |
| * BIOS and Kernel Developer's Guide, which is available on | |
| * www.amd.com | |
| */ | |
| pr_err(FW_BUG "No PSB or ACPI _PSS objects\n"); | |
| pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n"); | |
| return -ENODEV; | |
| } | |
| static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, | |
| unsigned int index) | |
| { | |
| u64 control; | |
| if (!data->acpi_data.state_count) | |
| return; | |
| control = data->acpi_data.states[index].control; | |
| data->irt = (control >> IRT_SHIFT) & IRT_MASK; | |
| data->rvo = (control >> RVO_SHIFT) & RVO_MASK; | |
| data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; | |
| data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; | |
| data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); | |
| data->vstable = (control >> VST_SHIFT) & VST_MASK; | |
| } | |
| static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) | |
| { | |
| struct cpufreq_frequency_table *powernow_table; | |
| int ret_val = -ENODEV; | |
| u64 control, status; | |
| if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { | |
| pr_debug("register performance failed: bad ACPI data\n"); | |
| return -EIO; | |
| } | |
| /* verify the data contained in the ACPI structures */ | |
| if (data->acpi_data.state_count <= 1) { | |
| pr_debug("No ACPI P-States\n"); | |
| goto err_out; | |
| } | |
| control = data->acpi_data.control_register.space_id; | |
| status = data->acpi_data.status_register.space_id; | |
| if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || | |
| (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { | |
| pr_debug("Invalid control/status registers (%llx - %llx)\n", | |
| control, status); | |
| goto err_out; | |
| } | |
| /* fill in data->powernow_table */ | |
| powernow_table = kzalloc((sizeof(*powernow_table) | |
| * (data->acpi_data.state_count + 1)), GFP_KERNEL); | |
| if (!powernow_table) | |
| goto err_out; | |
| /* fill in data */ | |
| data->numps = data->acpi_data.state_count; | |
| powernow_k8_acpi_pst_values(data, 0); | |
| ret_val = fill_powernow_table_fidvid(data, powernow_table); | |
| if (ret_val) | |
| goto err_out_mem; | |
| powernow_table[data->acpi_data.state_count].frequency = | |
| CPUFREQ_TABLE_END; | |
| data->powernow_table = powernow_table; | |
| if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu) | |
| print_basics(data); | |
| /* notify BIOS that we exist */ | |
| acpi_processor_notify_smm(THIS_MODULE); | |
| if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { | |
| pr_err("unable to alloc powernow_k8_data cpumask\n"); | |
| ret_val = -ENOMEM; | |
| goto err_out_mem; | |
| } | |
| return 0; | |
| err_out_mem: | |
| kfree(powernow_table); | |
| err_out: | |
| acpi_processor_unregister_performance(data->cpu); | |
| /* data->acpi_data.state_count informs us at ->exit() | |
| * whether ACPI was used */ | |
| data->acpi_data.state_count = 0; | |
| return ret_val; | |
| } | |
| static int fill_powernow_table_fidvid(struct powernow_k8_data *data, | |
| struct cpufreq_frequency_table *powernow_table) | |
| { | |
| int i; | |
| for (i = 0; i < data->acpi_data.state_count; i++) { | |
| u32 fid; | |
| u32 vid; | |
| u32 freq, index; | |
| u64 status, control; | |
| if (data->exttype) { | |
| status = data->acpi_data.states[i].status; | |
| fid = status & EXT_FID_MASK; | |
| vid = (status >> VID_SHIFT) & EXT_VID_MASK; | |
| } else { | |
| control = data->acpi_data.states[i].control; | |
| fid = control & FID_MASK; | |
| vid = (control >> VID_SHIFT) & VID_MASK; | |
| } | |
| pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); | |
| index = fid | (vid<<8); | |
| powernow_table[i].driver_data = index; | |
| freq = find_khz_freq_from_fid(fid); | |
| powernow_table[i].frequency = freq; | |
| /* verify frequency is OK */ | |
| if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { | |
| pr_debug("invalid freq %u kHz, ignoring\n", freq); | |
| invalidate_entry(powernow_table, i); | |
| continue; | |
| } | |
| /* verify voltage is OK - | |
| * BIOSs are using "off" to indicate invalid */ | |
| if (vid == VID_OFF) { | |
| pr_debug("invalid vid %u, ignoring\n", vid); | |
| invalidate_entry(powernow_table, i); | |
| continue; | |
| } | |
| if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { | |
| pr_info("invalid freq entries %u kHz vs. %u kHz\n", | |
| freq, (unsigned int) | |
| (data->acpi_data.states[i].core_frequency | |
| * 1000)); | |
| invalidate_entry(powernow_table, i); | |
| continue; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) | |
| { | |
| if (data->acpi_data.state_count) | |
| acpi_processor_unregister_performance(data->cpu); | |
| free_cpumask_var(data->acpi_data.shared_cpu_map); | |
| } | |
| static int get_transition_latency(struct powernow_k8_data *data) | |
| { | |
| int max_latency = 0; | |
| int i; | |
| for (i = 0; i < data->acpi_data.state_count; i++) { | |
| int cur_latency = data->acpi_data.states[i].transition_latency | |
| + data->acpi_data.states[i].bus_master_latency; | |
| if (cur_latency > max_latency) | |
| max_latency = cur_latency; | |
| } | |
| if (max_latency == 0) { | |
| pr_err(FW_WARN "Invalid zero transition latency\n"); | |
| max_latency = 1; | |
| } | |
| /* value in usecs, needs to be in nanoseconds */ | |
| return 1000 * max_latency; | |
| } | |
| /* Take a frequency, and issue the fid/vid transition command */ | |
| static int transition_frequency_fidvid(struct powernow_k8_data *data, | |
| unsigned int index, | |
| struct cpufreq_policy *policy) | |
| { | |
| u32 fid = 0; | |
| u32 vid = 0; | |
| int res; | |
| struct cpufreq_freqs freqs; | |
| pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); | |
| /* fid/vid correctness check for k8 */ | |
| /* fid are the lower 8 bits of the index we stored into | |
| * the cpufreq frequency table in find_psb_table, vid | |
| * are the upper 8 bits. | |
| */ | |
| fid = data->powernow_table[index].driver_data & 0xFF; | |
| vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; | |
| pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); | |
| if (query_current_values_with_pending_wait(data)) | |
| return 1; | |
| if ((data->currvid == vid) && (data->currfid == fid)) { | |
| pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n", | |
| fid, vid); | |
| return 0; | |
| } | |
| pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n", | |
| smp_processor_id(), fid, vid); | |
| freqs.old = find_khz_freq_from_fid(data->currfid); | |
| freqs.new = find_khz_freq_from_fid(fid); | |
| cpufreq_freq_transition_begin(policy, &freqs); | |
| res = transition_fid_vid(data, fid, vid); | |
| cpufreq_freq_transition_end(policy, &freqs, res); | |
| return res; | |
| } | |
| struct powernowk8_target_arg { | |
| struct cpufreq_policy *pol; | |
| unsigned newstate; | |
| }; | |
| static long powernowk8_target_fn(void *arg) | |
| { | |
| struct powernowk8_target_arg *pta = arg; | |
| struct cpufreq_policy *pol = pta->pol; | |
| unsigned newstate = pta->newstate; | |
| struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); | |
| u32 checkfid; | |
| u32 checkvid; | |
| int ret; | |
| if (!data) | |
| return -EINVAL; | |
| checkfid = data->currfid; | |
| checkvid = data->currvid; | |
| if (pending_bit_stuck()) { | |
| pr_err("failing targ, change pending bit set\n"); | |
| return -EIO; | |
| } | |
| pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n", | |
| pol->cpu, data->powernow_table[newstate].frequency, pol->min, | |
| pol->max); | |
| if (query_current_values_with_pending_wait(data)) | |
| return -EIO; | |
| pr_debug("targ: curr fid 0x%x, vid 0x%x\n", | |
| data->currfid, data->currvid); | |
| if ((checkvid != data->currvid) || | |
| (checkfid != data->currfid)) { | |
| pr_info("error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", | |
| checkfid, data->currfid, | |
| checkvid, data->currvid); | |
| } | |
| mutex_lock(&fidvid_mutex); | |
| powernow_k8_acpi_pst_values(data, newstate); | |
| ret = transition_frequency_fidvid(data, newstate, pol); | |
| if (ret) { | |
| pr_err("transition frequency failed\n"); | |
| mutex_unlock(&fidvid_mutex); | |
| return 1; | |
| } | |
| mutex_unlock(&fidvid_mutex); | |
| pol->cur = find_khz_freq_from_fid(data->currfid); | |
| return 0; | |
| } | |
| /* Driver entry point to switch to the target frequency */ | |
| static int powernowk8_target(struct cpufreq_policy *pol, unsigned index) | |
| { | |
| struct powernowk8_target_arg pta = { .pol = pol, .newstate = index }; | |
| return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); | |
| } | |
| struct init_on_cpu { | |
| struct powernow_k8_data *data; | |
| int rc; | |
| }; | |
| static void powernowk8_cpu_init_on_cpu(void *_init_on_cpu) | |
| { | |
| struct init_on_cpu *init_on_cpu = _init_on_cpu; | |
| if (pending_bit_stuck()) { | |
| pr_err("failing init, change pending bit set\n"); | |
| init_on_cpu->rc = -ENODEV; | |
| return; | |
| } | |
| if (query_current_values_with_pending_wait(init_on_cpu->data)) { | |
| init_on_cpu->rc = -ENODEV; | |
| return; | |
| } | |
| fidvid_msr_init(); | |
| init_on_cpu->rc = 0; | |
| } | |
| #define MISSING_PSS_MSG \ | |
| FW_BUG "No compatible ACPI _PSS objects found.\n" \ | |
| FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \ | |
| FW_BUG "If that doesn't help, try upgrading your BIOS.\n" | |
| /* per CPU init entry point to the driver */ | |
| static int powernowk8_cpu_init(struct cpufreq_policy *pol) | |
| { | |
| struct powernow_k8_data *data; | |
| struct init_on_cpu init_on_cpu; | |
| int rc, cpu; | |
| smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); | |
| if (rc) | |
| return -ENODEV; | |
| data = kzalloc_obj(*data); | |
| if (!data) | |
| return -ENOMEM; | |
| data->cpu = pol->cpu; | |
| if (powernow_k8_cpu_init_acpi(data)) { | |
| /* | |
| * Use the PSB BIOS structure. This is only available on | |
| * an UP version, and is deprecated by AMD. | |
| */ | |
| if (num_online_cpus() != 1) { | |
| pr_err_once(MISSING_PSS_MSG); | |
| goto err_out; | |
| } | |
| if (pol->cpu != 0) { | |
| pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n"); | |
| goto err_out; | |
| } | |
| rc = find_psb_table(data); | |
| if (rc) | |
| goto err_out; | |
| /* Take a crude guess here. | |
| * That guess was in microseconds, so multiply with 1000 */ | |
| pol->cpuinfo.transition_latency = ( | |
| ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + | |
| ((1 << data->irt) * 30)) * 1000; | |
| } else /* ACPI _PSS objects available */ | |
| pol->cpuinfo.transition_latency = get_transition_latency(data); | |
| /* only run on specific CPU from here on */ | |
| init_on_cpu.data = data; | |
| smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, | |
| &init_on_cpu, 1); | |
| rc = init_on_cpu.rc; | |
| if (rc != 0) | |
| goto err_out_exit_acpi; | |
| cpumask_copy(pol->cpus, topology_core_cpumask(pol->cpu)); | |
| data->available_cores = pol->cpus; | |
| pol->freq_table = data->powernow_table; | |
| pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", | |
| data->currfid, data->currvid); | |
| /* Point all the CPUs in this policy to the same data */ | |
| for_each_cpu(cpu, pol->cpus) | |
| per_cpu(powernow_data, cpu) = data; | |
| return 0; | |
| err_out_exit_acpi: | |
| powernow_k8_cpu_exit_acpi(data); | |
| kfree(data->powernow_table); | |
| err_out: | |
| kfree(data); | |
| return -ENODEV; | |
| } | |
| static void powernowk8_cpu_exit(struct cpufreq_policy *pol) | |
| { | |
| struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); | |
| int cpu; | |
| if (!data) | |
| return; | |
| powernow_k8_cpu_exit_acpi(data); | |
| kfree(data->powernow_table); | |
| kfree(data); | |
| /* pol->cpus will be empty here, use related_cpus instead. */ | |
| for_each_cpu(cpu, pol->related_cpus) | |
| per_cpu(powernow_data, cpu) = NULL; | |
| } | |
| static void query_values_on_cpu(void *_err) | |
| { | |
| int *err = _err; | |
| struct powernow_k8_data *data = __this_cpu_read(powernow_data); | |
| *err = query_current_values_with_pending_wait(data); | |
| } | |
| static unsigned int powernowk8_get(unsigned int cpu) | |
| { | |
| struct powernow_k8_data *data = per_cpu(powernow_data, cpu); | |
| unsigned int khz = 0; | |
| int err; | |
| if (!data) | |
| return 0; | |
| smp_call_function_single(cpu, query_values_on_cpu, &err, true); | |
| if (err) | |
| goto out; | |
| khz = find_khz_freq_from_fid(data->currfid); | |
| out: | |
| return khz; | |
| } | |
| static struct cpufreq_driver cpufreq_amd64_driver = { | |
| .flags = CPUFREQ_ASYNC_NOTIFICATION, | |
| .verify = cpufreq_generic_frequency_table_verify, | |
| .target_index = powernowk8_target, | |
| .bios_limit = acpi_processor_get_bios_limit, | |
| .init = powernowk8_cpu_init, | |
| .exit = powernowk8_cpu_exit, | |
| .get = powernowk8_get, | |
| .name = "powernow-k8", | |
| }; | |
| static void __request_acpi_cpufreq(void) | |
| { | |
| const char drv[] = "acpi-cpufreq"; | |
| const char *cur_drv; | |
| cur_drv = cpufreq_get_current_driver(); | |
| if (!cur_drv) | |
| goto request; | |
| if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv)))) | |
| pr_warn("WTF driver: %s\n", cur_drv); | |
| return; | |
| request: | |
| pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n"); | |
| request_module(drv); | |
| } | |
| /* driver entry point for init */ | |
| static int powernowk8_init(void) | |
| { | |
| unsigned int i, supported_cpus = 0; | |
| int ret; | |
| if (!x86_match_cpu(powernow_k8_ids)) | |
| return -ENODEV; | |
| if (boot_cpu_has(X86_FEATURE_HW_PSTATE)) { | |
| __request_acpi_cpufreq(); | |
| return -ENODEV; | |
| } | |
| cpus_read_lock(); | |
| for_each_online_cpu(i) { | |
| smp_call_function_single(i, check_supported_cpu, &ret, 1); | |
| if (!ret) | |
| supported_cpus++; | |
| } | |
| if (supported_cpus != num_online_cpus()) { | |
| cpus_read_unlock(); | |
| return -ENODEV; | |
| } | |
| cpus_read_unlock(); | |
| ret = cpufreq_register_driver(&cpufreq_amd64_driver); | |
| if (ret) | |
| return ret; | |
| pr_info("Found %d %s (%d cpu cores) (" VERSION ")\n", | |
| num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); | |
| return ret; | |
| } | |
| /* driver entry point for term */ | |
| static void __exit powernowk8_exit(void) | |
| { | |
| pr_debug("exit\n"); | |
| cpufreq_unregister_driver(&cpufreq_amd64_driver); | |
| } | |
| MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); | |
| MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>"); | |
| MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); | |
| MODULE_LICENSE("GPL"); | |
| late_initcall(powernowk8_init); | |
| module_exit(powernowk8_exit); |