| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2020, The Linux Foundation. All rights reserved. | |
| */ | |
| /* | |
| * Each of the CPU clusters (Power and Perf) on msm8996 are | |
| * clocked via 2 PLLs, a primary and alternate. There are also | |
| * 2 Mux'es, a primary and secondary all connected together | |
| * as shown below | |
| * | |
| * +-------+ | |
| * XO | | | |
| * +------------------>0 | | |
| * SYS_APCS_AUX | | | |
| * +------------------>3 | | |
| * | | | |
| * PLL/2 | SMUX +----+ | |
| * +------->1 | | | |
| * | | | | | |
| * | +-------+ | +-------+ | |
| * | +---->0 | | |
| * | | | | |
| * +---------------+ | +----------->1 | CPU clk | |
| * |Primary PLL +----+ PLL_EARLY | | +------> | |
| * | +------+-----------+ +------>2 PMUX | | |
| * +---------------+ | | | | | |
| * | +------+ | +-->3 | | |
| * +--^+ ACD +-----+ | +-------+ | |
| * +---------------+ +------+ | | |
| * |Alt PLL | | | |
| * | +---------------------------+ | |
| * +---------------+ PLL_EARLY | |
| * | |
| * The primary PLL is what drives the CPU clk, except for times | |
| * when we are reprogramming the PLL itself (for rate changes) when | |
| * we temporarily switch to an alternate PLL. | |
| * | |
| * The primary PLL operates on a single VCO range, between 600MHz | |
| * and 3GHz. However the CPUs do support OPPs with frequencies | |
| * between 300MHz and 600MHz. In order to support running the CPUs | |
| * at those frequencies we end up having to lock the PLL at twice | |
| * the rate and drive the CPU clk via the PLL/2 output and SMUX. | |
| * | |
| * So for frequencies above 600MHz we follow the following path | |
| * Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk | |
| * and for frequencies between 300MHz and 600MHz we follow | |
| * Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk | |
| * | |
| * ACD stands for Adaptive Clock Distribution and is used to | |
| * detect voltage droops. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <soc/qcom/kryo-l2-accessors.h> | |
| #include <asm/cputype.h> | |
| #include "clk-alpha-pll.h" | |
| #include "clk-regmap.h" | |
| #include "clk-regmap-mux.h" | |
| enum _pmux_input { | |
| SMUX_INDEX = 0, | |
| PLL_INDEX, | |
| ACD_INDEX, | |
| ALT_INDEX, | |
| NUM_OF_PMUX_INPUTS | |
| }; | |
| #define DIV_2_THRESHOLD 600000000 | |
| #define PWRCL_REG_OFFSET 0x0 | |
| #define PERFCL_REG_OFFSET 0x80000 | |
| #define MUX_OFFSET 0x40 | |
| #define CLK_CTL_OFFSET 0x44 | |
| #define CLK_CTL_AUTO_CLK_SEL BIT(8) | |
| #define ALT_PLL_OFFSET 0x100 | |
| #define SSSCTL_OFFSET 0x160 | |
| #define PSCTL_OFFSET 0x164 | |
| #define PMUX_MASK 0x3 | |
| #define MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK GENMASK(5, 4) | |
| #define MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL \ | |
| FIELD_PREP(MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK, 0x03) | |
| static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = { | |
| [PLL_OFF_L_VAL] = 0x04, | |
| [PLL_OFF_ALPHA_VAL] = 0x08, | |
| [PLL_OFF_USER_CTL] = 0x10, | |
| [PLL_OFF_CONFIG_CTL] = 0x18, | |
| [PLL_OFF_CONFIG_CTL_U] = 0x1c, | |
| [PLL_OFF_TEST_CTL] = 0x20, | |
| [PLL_OFF_TEST_CTL_U] = 0x24, | |
| [PLL_OFF_STATUS] = 0x28, | |
| }; | |
| static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = { | |
| [PLL_OFF_L_VAL] = 0x04, | |
| [PLL_OFF_ALPHA_VAL] = 0x08, | |
| [PLL_OFF_USER_CTL] = 0x10, | |
| [PLL_OFF_CONFIG_CTL] = 0x18, | |
| [PLL_OFF_TEST_CTL] = 0x20, | |
| [PLL_OFF_STATUS] = 0x28, | |
| }; | |
| /* PLLs */ | |
| static const struct alpha_pll_config hfpll_config = { | |
| .l = 54, | |
| .config_ctl_val = 0x200d4828, | |
| .config_ctl_hi_val = 0x006, | |
| .test_ctl_val = 0x1c000000, | |
| .test_ctl_hi_val = 0x00004000, | |
| .pre_div_mask = BIT(12), | |
| .post_div_mask = 0x3 << 8, | |
| .post_div_val = 0x1 << 8, | |
| .main_output_mask = BIT(0), | |
| .early_output_mask = BIT(3), | |
| }; | |
| static const struct clk_parent_data pll_parent[] = { | |
| { .fw_name = "xo" }, | |
| }; | |
| static struct clk_alpha_pll pwrcl_pll = { | |
| .offset = PWRCL_REG_OFFSET, | |
| .regs = prim_pll_regs, | |
| .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE, | |
| .clkr.hw.init = &(struct clk_init_data){ | |
| .name = "pwrcl_pll", | |
| .parent_data = pll_parent, | |
| .num_parents = ARRAY_SIZE(pll_parent), | |
| .ops = &clk_alpha_pll_hwfsm_ops, | |
| }, | |
| }; | |
| static struct clk_alpha_pll perfcl_pll = { | |
| .offset = PERFCL_REG_OFFSET, | |
| .regs = prim_pll_regs, | |
| .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE, | |
| .clkr.hw.init = &(struct clk_init_data){ | |
| .name = "perfcl_pll", | |
| .parent_data = pll_parent, | |
| .num_parents = ARRAY_SIZE(pll_parent), | |
| .ops = &clk_alpha_pll_hwfsm_ops, | |
| }, | |
| }; | |
| static struct clk_fixed_factor pwrcl_pll_postdiv = { | |
| .mult = 1, | |
| .div = 2, | |
| .hw.init = &(struct clk_init_data){ | |
| .name = "pwrcl_pll_postdiv", | |
| .parent_data = &(const struct clk_parent_data){ | |
| .hw = &pwrcl_pll.clkr.hw | |
| }, | |
| .num_parents = 1, | |
| .ops = &clk_fixed_factor_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static struct clk_fixed_factor perfcl_pll_postdiv = { | |
| .mult = 1, | |
| .div = 2, | |
| .hw.init = &(struct clk_init_data){ | |
| .name = "perfcl_pll_postdiv", | |
| .parent_data = &(const struct clk_parent_data){ | |
| .hw = &perfcl_pll.clkr.hw | |
| }, | |
| .num_parents = 1, | |
| .ops = &clk_fixed_factor_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static struct clk_fixed_factor perfcl_pll_acd = { | |
| .mult = 1, | |
| .div = 1, | |
| .hw.init = &(struct clk_init_data){ | |
| .name = "perfcl_pll_acd", | |
| .parent_data = &(const struct clk_parent_data){ | |
| .hw = &perfcl_pll.clkr.hw | |
| }, | |
| .num_parents = 1, | |
| .ops = &clk_fixed_factor_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static struct clk_fixed_factor pwrcl_pll_acd = { | |
| .mult = 1, | |
| .div = 1, | |
| .hw.init = &(struct clk_init_data){ | |
| .name = "pwrcl_pll_acd", | |
| .parent_data = &(const struct clk_parent_data){ | |
| .hw = &pwrcl_pll.clkr.hw | |
| }, | |
| .num_parents = 1, | |
| .ops = &clk_fixed_factor_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static const struct pll_vco alt_pll_vco_modes[] = { | |
| VCO(3, 250000000, 500000000), | |
| VCO(2, 500000000, 750000000), | |
| VCO(1, 750000000, 1000000000), | |
| VCO(0, 1000000000, 2150400000), | |
| }; | |
| static const struct alpha_pll_config altpll_config = { | |
| .l = 16, | |
| .vco_val = 0x3 << 20, | |
| .vco_mask = 0x3 << 20, | |
| .config_ctl_val = 0x4001051b, | |
| .post_div_mask = 0x3 << 8, | |
| .post_div_val = 0x1 << 8, | |
| .main_output_mask = BIT(0), | |
| .early_output_mask = BIT(3), | |
| }; | |
| static struct clk_alpha_pll pwrcl_alt_pll = { | |
| .offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET, | |
| .regs = alt_pll_regs, | |
| .vco_table = alt_pll_vco_modes, | |
| .num_vco = ARRAY_SIZE(alt_pll_vco_modes), | |
| .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "pwrcl_alt_pll", | |
| .parent_data = pll_parent, | |
| .num_parents = ARRAY_SIZE(pll_parent), | |
| .ops = &clk_alpha_pll_hwfsm_ops, | |
| }, | |
| }; | |
| static struct clk_alpha_pll perfcl_alt_pll = { | |
| .offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET, | |
| .regs = alt_pll_regs, | |
| .vco_table = alt_pll_vco_modes, | |
| .num_vco = ARRAY_SIZE(alt_pll_vco_modes), | |
| .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "perfcl_alt_pll", | |
| .parent_data = pll_parent, | |
| .num_parents = ARRAY_SIZE(pll_parent), | |
| .ops = &clk_alpha_pll_hwfsm_ops, | |
| }, | |
| }; | |
| struct clk_cpu_8996_pmux { | |
| u32 reg; | |
| struct notifier_block nb; | |
| struct clk_regmap clkr; | |
| }; | |
| static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, | |
| void *data); | |
| #define to_clk_cpu_8996_pmux_nb(_nb) \ | |
| container_of(_nb, struct clk_cpu_8996_pmux, nb) | |
| static inline struct clk_cpu_8996_pmux *to_clk_cpu_8996_pmux_hw(struct clk_hw *hw) | |
| { | |
| return container_of(to_clk_regmap(hw), struct clk_cpu_8996_pmux, clkr); | |
| } | |
| static u8 clk_cpu_8996_pmux_get_parent(struct clk_hw *hw) | |
| { | |
| struct clk_regmap *clkr = to_clk_regmap(hw); | |
| struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw); | |
| u32 val; | |
| regmap_read(clkr->regmap, cpuclk->reg, &val); | |
| return FIELD_GET(PMUX_MASK, val); | |
| } | |
| static int clk_cpu_8996_pmux_set_parent(struct clk_hw *hw, u8 index) | |
| { | |
| struct clk_regmap *clkr = to_clk_regmap(hw); | |
| struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw); | |
| u32 val; | |
| val = FIELD_PREP(PMUX_MASK, index); | |
| return regmap_update_bits(clkr->regmap, cpuclk->reg, PMUX_MASK, val); | |
| } | |
| static int clk_cpu_8996_pmux_determine_rate(struct clk_hw *hw, | |
| struct clk_rate_request *req) | |
| { | |
| struct clk_hw *parent; | |
| if (req->rate < (DIV_2_THRESHOLD / 2)) | |
| return -EINVAL; | |
| if (req->rate < DIV_2_THRESHOLD) | |
| parent = clk_hw_get_parent_by_index(hw, SMUX_INDEX); | |
| else | |
| parent = clk_hw_get_parent_by_index(hw, ACD_INDEX); | |
| if (!parent) | |
| return -EINVAL; | |
| req->best_parent_rate = clk_hw_round_rate(parent, req->rate); | |
| req->best_parent_hw = parent; | |
| return 0; | |
| } | |
| static const struct clk_ops clk_cpu_8996_pmux_ops = { | |
| .set_parent = clk_cpu_8996_pmux_set_parent, | |
| .get_parent = clk_cpu_8996_pmux_get_parent, | |
| .determine_rate = clk_cpu_8996_pmux_determine_rate, | |
| }; | |
| static const struct parent_map smux_parent_map[] = { | |
| { .cfg = 0, }, /* xo */ | |
| { .cfg = 1, }, /* pll */ | |
| { .cfg = 3, }, /* sys_apcs_aux */ | |
| }; | |
| static const struct clk_parent_data pwrcl_smux_parents[] = { | |
| { .fw_name = "xo" }, | |
| { .hw = &pwrcl_pll_postdiv.hw }, | |
| { .fw_name = "sys_apcs_aux" }, | |
| }; | |
| static const struct clk_parent_data perfcl_smux_parents[] = { | |
| { .fw_name = "xo" }, | |
| { .hw = &perfcl_pll_postdiv.hw }, | |
| { .fw_name = "sys_apcs_aux" }, | |
| }; | |
| static struct clk_regmap_mux pwrcl_smux = { | |
| .reg = PWRCL_REG_OFFSET + MUX_OFFSET, | |
| .shift = 2, | |
| .width = 2, | |
| .parent_map = smux_parent_map, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "pwrcl_smux", | |
| .parent_data = pwrcl_smux_parents, | |
| .num_parents = ARRAY_SIZE(pwrcl_smux_parents), | |
| .ops = &clk_regmap_mux_closest_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static struct clk_regmap_mux perfcl_smux = { | |
| .reg = PERFCL_REG_OFFSET + MUX_OFFSET, | |
| .shift = 2, | |
| .width = 2, | |
| .parent_map = smux_parent_map, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "perfcl_smux", | |
| .parent_data = perfcl_smux_parents, | |
| .num_parents = ARRAY_SIZE(perfcl_smux_parents), | |
| .ops = &clk_regmap_mux_closest_ops, | |
| .flags = CLK_SET_RATE_PARENT, | |
| }, | |
| }; | |
| static const struct clk_hw *pwrcl_pmux_parents[] = { | |
| [SMUX_INDEX] = &pwrcl_smux.clkr.hw, | |
| [PLL_INDEX] = &pwrcl_pll.clkr.hw, | |
| [ACD_INDEX] = &pwrcl_pll_acd.hw, | |
| [ALT_INDEX] = &pwrcl_alt_pll.clkr.hw, | |
| }; | |
| static const struct clk_hw *perfcl_pmux_parents[] = { | |
| [SMUX_INDEX] = &perfcl_smux.clkr.hw, | |
| [PLL_INDEX] = &perfcl_pll.clkr.hw, | |
| [ACD_INDEX] = &perfcl_pll_acd.hw, | |
| [ALT_INDEX] = &perfcl_alt_pll.clkr.hw, | |
| }; | |
| static struct clk_cpu_8996_pmux pwrcl_pmux = { | |
| .reg = PWRCL_REG_OFFSET + MUX_OFFSET, | |
| .nb.notifier_call = cpu_clk_notifier_cb, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "pwrcl_pmux", | |
| .parent_hws = pwrcl_pmux_parents, | |
| .num_parents = ARRAY_SIZE(pwrcl_pmux_parents), | |
| .ops = &clk_cpu_8996_pmux_ops, | |
| /* CPU clock is critical and should never be gated */ | |
| .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, | |
| }, | |
| }; | |
| static struct clk_cpu_8996_pmux perfcl_pmux = { | |
| .reg = PERFCL_REG_OFFSET + MUX_OFFSET, | |
| .nb.notifier_call = cpu_clk_notifier_cb, | |
| .clkr.hw.init = &(struct clk_init_data) { | |
| .name = "perfcl_pmux", | |
| .parent_hws = perfcl_pmux_parents, | |
| .num_parents = ARRAY_SIZE(perfcl_pmux_parents), | |
| .ops = &clk_cpu_8996_pmux_ops, | |
| /* CPU clock is critical and should never be gated */ | |
| .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, | |
| }, | |
| }; | |
| static const struct regmap_config cpu_msm8996_regmap_config = { | |
| .reg_bits = 32, | |
| .reg_stride = 4, | |
| .val_bits = 32, | |
| .max_register = 0x80210, | |
| .val_format_endian = REGMAP_ENDIAN_LITTLE, | |
| }; | |
| static struct clk_hw *cpu_msm8996_hw_clks[] = { | |
| &pwrcl_pll_postdiv.hw, | |
| &perfcl_pll_postdiv.hw, | |
| &pwrcl_pll_acd.hw, | |
| &perfcl_pll_acd.hw, | |
| }; | |
| static struct clk_regmap *cpu_msm8996_clks[] = { | |
| &pwrcl_pll.clkr, | |
| &perfcl_pll.clkr, | |
| &pwrcl_alt_pll.clkr, | |
| &perfcl_alt_pll.clkr, | |
| &pwrcl_smux.clkr, | |
| &perfcl_smux.clkr, | |
| &pwrcl_pmux.clkr, | |
| &perfcl_pmux.clkr, | |
| }; | |
| static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap); | |
| static int qcom_cpu_clk_msm8996_register_clks(struct device *dev, | |
| struct regmap *regmap) | |
| { | |
| int i, ret; | |
| /* Select GPLL0 for 300MHz for both clusters */ | |
| regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0xc); | |
| regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0xc); | |
| /* Ensure write goes through before PLLs are reconfigured */ | |
| udelay(5); | |
| /* Set the auto clock sel always-on source to GPLL0/2 (300MHz) */ | |
| regmap_update_bits(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, | |
| MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK, | |
| MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL); | |
| regmap_update_bits(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, | |
| MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK, | |
| MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL); | |
| clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config); | |
| clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config); | |
| clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config); | |
| clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config); | |
| /* Wait for PLL(s) to lock */ | |
| udelay(50); | |
| /* Enable auto clock selection for both clusters */ | |
| regmap_update_bits(regmap, PWRCL_REG_OFFSET + CLK_CTL_OFFSET, | |
| CLK_CTL_AUTO_CLK_SEL, CLK_CTL_AUTO_CLK_SEL); | |
| regmap_update_bits(regmap, PERFCL_REG_OFFSET + CLK_CTL_OFFSET, | |
| CLK_CTL_AUTO_CLK_SEL, CLK_CTL_AUTO_CLK_SEL); | |
| /* Ensure write goes through before muxes are switched */ | |
| udelay(5); | |
| qcom_cpu_clk_msm8996_acd_init(regmap); | |
| /* Pulse swallower and soft-start settings */ | |
| regmap_write(regmap, PWRCL_REG_OFFSET + PSCTL_OFFSET, 0x00030005); | |
| regmap_write(regmap, PERFCL_REG_OFFSET + PSCTL_OFFSET, 0x00030005); | |
| /* Switch clusters to use the ACD leg */ | |
| regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0x32); | |
| regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0x32); | |
| for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) { | |
| ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]); | |
| if (ret) | |
| return ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(cpu_msm8996_clks); i++) { | |
| ret = devm_clk_register_regmap(dev, cpu_msm8996_clks[i]); | |
| if (ret) | |
| return ret; | |
| } | |
| /* Enable alt PLLs */ | |
| clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk); | |
| clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk); | |
| devm_clk_notifier_register(dev, pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb); | |
| devm_clk_notifier_register(dev, perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb); | |
| return ret; | |
| } | |
| #define CPU_CLUSTER_AFFINITY_MASK 0xf00 | |
| #define PWRCL_AFFINITY_MASK 0x000 | |
| #define PERFCL_AFFINITY_MASK 0x100 | |
| #define L2ACDCR_REG 0x580ULL | |
| #define L2ACDTD_REG 0x581ULL | |
| #define L2ACDDVMRC_REG 0x584ULL | |
| #define L2ACDSSCR_REG 0x589ULL | |
| static DEFINE_SPINLOCK(qcom_clk_acd_lock); | |
| static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap) | |
| { | |
| u64 hwid; | |
| u32 val; | |
| unsigned long flags; | |
| spin_lock_irqsave(&qcom_clk_acd_lock, flags); | |
| val = kryo_l2_get_indirect_reg(L2ACDTD_REG); | |
| if (val == 0x00006a11) | |
| goto out; | |
| kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11); | |
| kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000e0f0f); | |
| kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601); | |
| kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd); | |
| hwid = read_cpuid_mpidr(); | |
| if ((hwid & CPU_CLUSTER_AFFINITY_MASK) == PWRCL_AFFINITY_MASK) | |
| regmap_write(regmap, PWRCL_REG_OFFSET + SSSCTL_OFFSET, 0xf); | |
| else | |
| regmap_write(regmap, PERFCL_REG_OFFSET + SSSCTL_OFFSET, 0xf); | |
| out: | |
| spin_unlock_irqrestore(&qcom_clk_acd_lock, flags); | |
| } | |
| static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, | |
| void *data) | |
| { | |
| struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_nb(nb); | |
| struct clk_notifier_data *cnd = data; | |
| switch (event) { | |
| case PRE_RATE_CHANGE: | |
| qcom_cpu_clk_msm8996_acd_init(cpuclk->clkr.regmap); | |
| /* | |
| * Avoid overvolting. clk_core_set_rate_nolock() walks from top | |
| * to bottom, so it will change the rate of the PLL before | |
| * chaging the parent of PMUX. This can result in pmux getting | |
| * clocked twice the expected rate. | |
| * | |
| * Manually switch to PLL/2 here. | |
| */ | |
| if (cnd->new_rate < DIV_2_THRESHOLD && | |
| cnd->old_rate > DIV_2_THRESHOLD) | |
| clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw, SMUX_INDEX); | |
| break; | |
| case ABORT_RATE_CHANGE: | |
| /* Revert manual change */ | |
| if (cnd->new_rate < DIV_2_THRESHOLD && | |
| cnd->old_rate > DIV_2_THRESHOLD) | |
| clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw, ACD_INDEX); | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_OK; | |
| }; | |
| static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev) | |
| { | |
| static void __iomem *base; | |
| struct regmap *regmap; | |
| struct clk_hw_onecell_data *data; | |
| struct device *dev = &pdev->dev; | |
| int ret; | |
| data = devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->num = 2; | |
| base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| regmap = devm_regmap_init_mmio(dev, base, &cpu_msm8996_regmap_config); | |
| if (IS_ERR(regmap)) | |
| return PTR_ERR(regmap); | |
| ret = qcom_cpu_clk_msm8996_register_clks(dev, regmap); | |
| if (ret) | |
| return ret; | |
| data->hws[0] = &pwrcl_pmux.clkr.hw; | |
| data->hws[1] = &perfcl_pmux.clkr.hw; | |
| return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data); | |
| } | |
| static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = { | |
| { .compatible = "qcom,msm8996-apcc" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table); | |
| static struct platform_driver qcom_cpu_clk_msm8996_driver = { | |
| .probe = qcom_cpu_clk_msm8996_driver_probe, | |
| .driver = { | |
| .name = "qcom-msm8996-apcc", | |
| .of_match_table = qcom_cpu_clk_msm8996_match_table, | |
| }, | |
| }; | |
| module_platform_driver(qcom_cpu_clk_msm8996_driver); | |
| MODULE_DESCRIPTION("QCOM MSM8996 CPU Clock Driver"); | |
| MODULE_LICENSE("GPL v2"); |