| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * ipmi_si_pci.c | |
| * | |
| * Handling for IPMI devices on the PCI bus. | |
| */ | |
| #define pr_fmt(fmt) "ipmi_pci: " fmt | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include "ipmi_si.h" | |
| static bool pci_registered; | |
| static bool si_trypci = true; | |
| module_param_named(trypci, si_trypci, bool, 0); | |
| MODULE_PARM_DESC(trypci, | |
| "Setting this to zero will disable the default scan of the interfaces identified via pci"); | |
| #define PCI_DEVICE_ID_HP_MMC 0x121A | |
| static int ipmi_pci_probe_regspacing(struct si_sm_io *io) | |
| { | |
| unsigned char status; | |
| int regspacing; | |
| if (io->si_info->type != SI_KCS) | |
| return DEFAULT_REGSPACING; | |
| io->regsize = DEFAULT_REGSIZE; | |
| io->regshift = 0; | |
| /* detect 1, 4, 16byte spacing */ | |
| for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { | |
| io->regspacing = regspacing; | |
| if (io->io_setup(io)) { | |
| dev_err(io->dev, "Could not setup I/O space\n"); | |
| return DEFAULT_REGSPACING; | |
| } | |
| /* write invalid cmd */ | |
| io->outputb(io, 1, 0x10); | |
| /* read status back */ | |
| status = io->inputb(io, 1); | |
| io->io_cleanup(io); | |
| if (status) | |
| return regspacing; | |
| regspacing *= 4; | |
| } | |
| return DEFAULT_REGSPACING; | |
| } | |
| static struct pci_device_id ipmi_pci_blacklist[] = { | |
| /* | |
| * This is a "Virtual IPMI device", whatever that is. It appears | |
| * as a KCS device by the class, but it is not one. | |
| */ | |
| { PCI_VDEVICE(REALTEK, 0x816c) }, | |
| { 0, } | |
| }; | |
| static int ipmi_pci_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| int rv; | |
| struct si_sm_io io; | |
| if (pci_match_id(ipmi_pci_blacklist, pdev)) | |
| return -ENODEV; | |
| memset(&io, 0, sizeof(io)); | |
| io.addr_source = SI_PCI; | |
| dev_info(&pdev->dev, "probing via PCI"); | |
| switch (pdev->class) { | |
| case PCI_CLASS_SERIAL_IPMI_SMIC: | |
| io.si_info = &ipmi_smic_si_info; | |
| break; | |
| case PCI_CLASS_SERIAL_IPMI_KCS: | |
| io.si_info = &ipmi_kcs_si_info; | |
| break; | |
| case PCI_CLASS_SERIAL_IPMI_BT: | |
| io.si_info = &ipmi_bt_si_info; | |
| break; | |
| default: | |
| dev_info(&pdev->dev, "Unknown IPMI class: %x\n", pdev->class); | |
| return -ENOMEM; | |
| } | |
| rv = pcim_enable_device(pdev); | |
| if (rv) { | |
| dev_err(&pdev->dev, "couldn't enable PCI device\n"); | |
| return rv; | |
| } | |
| if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { | |
| if (!IS_ENABLED(CONFIG_HAS_IOPORT)) | |
| return -ENXIO; | |
| io.addr_space = IPMI_IO_ADDR_SPACE; | |
| io.io_setup = ipmi_si_port_setup; | |
| } else { | |
| io.addr_space = IPMI_MEM_ADDR_SPACE; | |
| io.io_setup = ipmi_si_mem_setup; | |
| } | |
| io.addr_data = pci_resource_start(pdev, 0); | |
| io.dev = &pdev->dev; | |
| io.regspacing = ipmi_pci_probe_regspacing(&io); | |
| io.regsize = DEFAULT_REGSIZE; | |
| io.regshift = 0; | |
| io.irq = pdev->irq; | |
| if (io.irq) | |
| io.irq_setup = ipmi_std_irq_setup; | |
| dev_info(&pdev->dev, "%pR regsize %u spacing %u irq %d\n", | |
| &pdev->resource[0], io.regsize, io.regspacing, io.irq); | |
| return ipmi_si_add_smi(&io); | |
| } | |
| static void ipmi_pci_remove(struct pci_dev *pdev) | |
| { | |
| ipmi_si_remove_by_dev(&pdev->dev); | |
| } | |
| static const struct pci_device_id ipmi_pci_devices[] = { | |
| { PCI_VDEVICE(HP, PCI_DEVICE_ID_HP_MMC) }, | |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_SMIC, ~0) }, | |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_KCS, ~0) }, | |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_BT, ~0) }, | |
| { 0, } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); | |
| static struct pci_driver ipmi_pci_driver = { | |
| .name = SI_DEVICE_NAME, | |
| .id_table = ipmi_pci_devices, | |
| .probe = ipmi_pci_probe, | |
| .remove = ipmi_pci_remove, | |
| }; | |
| void ipmi_si_pci_init(void) | |
| { | |
| if (si_trypci) { | |
| int rv = pci_register_driver(&ipmi_pci_driver); | |
| if (rv) | |
| pr_err("Unable to register PCI driver: %d\n", rv); | |
| else | |
| pci_registered = true; | |
| } | |
| } | |
| void ipmi_si_pci_shutdown(void) | |
| { | |
| if (pci_registered) | |
| pci_unregister_driver(&ipmi_pci_driver); | |
| } |