| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2016, Semihalf | |
| * Author: Tomasz Nowicki <tn@semihalf.com> | |
| * | |
| * This file implements early detection/parsing of I/O mapping | |
| * reported to OS through firmware via I/O Remapping Table (IORT) | |
| * IORT document number: ARM DEN 0049A | |
| */ | |
| #define pr_fmt(fmt) "ACPI: IORT: " fmt | |
| #include <linux/acpi_iort.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/iommu.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/pci.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/dma-map-ops.h> | |
| #include "init.h" | |
| #define IORT_TYPE_MASK(type) (1 << (type)) | |
| #define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP) | |
| #define IORT_IOMMU_TYPE ((1 << ACPI_IORT_NODE_SMMU) | \ | |
| (1 << ACPI_IORT_NODE_SMMU_V3)) | |
| struct iort_its_msi_chip { | |
| struct list_head list; | |
| struct fwnode_handle *fw_node; | |
| phys_addr_t base_addr; | |
| u32 translation_id; | |
| }; | |
| struct iort_fwnode { | |
| struct list_head list; | |
| struct acpi_iort_node *iort_node; | |
| struct fwnode_handle *fwnode; | |
| }; | |
| static LIST_HEAD(iort_fwnode_list); | |
| static DEFINE_SPINLOCK(iort_fwnode_lock); | |
| /** | |
| * iort_set_fwnode() - Create iort_fwnode and use it to register | |
| * iommu data in the iort_fwnode_list | |
| * | |
| * @iort_node: IORT table node associated with the IOMMU | |
| * @fwnode: fwnode associated with the IORT node | |
| * | |
| * Returns: 0 on success | |
| * <0 on failure | |
| */ | |
| static inline int iort_set_fwnode(struct acpi_iort_node *iort_node, | |
| struct fwnode_handle *fwnode) | |
| { | |
| struct iort_fwnode *np; | |
| np = kzalloc_obj(struct iort_fwnode, GFP_ATOMIC); | |
| if (WARN_ON(!np)) | |
| return -ENOMEM; | |
| INIT_LIST_HEAD(&np->list); | |
| np->iort_node = iort_node; | |
| np->fwnode = fwnode; | |
| spin_lock(&iort_fwnode_lock); | |
| list_add_tail(&np->list, &iort_fwnode_list); | |
| spin_unlock(&iort_fwnode_lock); | |
| return 0; | |
| } | |
| /** | |
| * iort_get_fwnode() - Retrieve fwnode associated with an IORT node | |
| * | |
| * @node: IORT table node to be looked-up | |
| * | |
| * Returns: fwnode_handle pointer on success, NULL on failure | |
| */ | |
| static inline struct fwnode_handle *iort_get_fwnode( | |
| struct acpi_iort_node *node) | |
| { | |
| struct iort_fwnode *curr; | |
| struct fwnode_handle *fwnode = NULL; | |
| spin_lock(&iort_fwnode_lock); | |
| list_for_each_entry(curr, &iort_fwnode_list, list) { | |
| if (curr->iort_node == node) { | |
| fwnode = curr->fwnode; | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_fwnode_lock); | |
| return fwnode; | |
| } | |
| /** | |
| * iort_delete_fwnode() - Delete fwnode associated with an IORT node | |
| * | |
| * @node: IORT table node associated with fwnode to delete | |
| */ | |
| static inline void iort_delete_fwnode(struct acpi_iort_node *node) | |
| { | |
| struct iort_fwnode *curr, *tmp; | |
| spin_lock(&iort_fwnode_lock); | |
| list_for_each_entry_safe(curr, tmp, &iort_fwnode_list, list) { | |
| if (curr->iort_node == node) { | |
| list_del(&curr->list); | |
| kfree(curr); | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_fwnode_lock); | |
| } | |
| /** | |
| * iort_get_iort_node() - Retrieve iort_node associated with an fwnode | |
| * | |
| * @fwnode: fwnode associated with device to be looked-up | |
| * | |
| * Returns: iort_node pointer on success, NULL on failure | |
| */ | |
| static inline struct acpi_iort_node *iort_get_iort_node( | |
| struct fwnode_handle *fwnode) | |
| { | |
| struct iort_fwnode *curr; | |
| struct acpi_iort_node *iort_node = NULL; | |
| spin_lock(&iort_fwnode_lock); | |
| list_for_each_entry(curr, &iort_fwnode_list, list) { | |
| if (curr->fwnode == fwnode) { | |
| iort_node = curr->iort_node; | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_fwnode_lock); | |
| return iort_node; | |
| } | |
| typedef acpi_status (*iort_find_node_callback) | |
| (struct acpi_iort_node *node, void *context); | |
| /* Root pointer to the mapped IORT table */ | |
| static struct acpi_table_header *iort_table; | |
| static LIST_HEAD(iort_msi_chip_list); | |
| static DEFINE_SPINLOCK(iort_msi_chip_lock); | |
| /** | |
| * iort_register_domain_token() - register domain token along with related | |
| * ITS ID and base address to the list from where we can get it back later on. | |
| * @trans_id: ITS ID. | |
| * @base: ITS base address. | |
| * @fw_node: Domain token. | |
| * | |
| * Returns: 0 on success, -ENOMEM if no memory when allocating list element | |
| */ | |
| int iort_register_domain_token(int trans_id, phys_addr_t base, | |
| struct fwnode_handle *fw_node) | |
| { | |
| struct iort_its_msi_chip *its_msi_chip; | |
| its_msi_chip = kzalloc_obj(*its_msi_chip); | |
| if (!its_msi_chip) | |
| return -ENOMEM; | |
| its_msi_chip->fw_node = fw_node; | |
| its_msi_chip->translation_id = trans_id; | |
| its_msi_chip->base_addr = base; | |
| spin_lock(&iort_msi_chip_lock); | |
| list_add(&its_msi_chip->list, &iort_msi_chip_list); | |
| spin_unlock(&iort_msi_chip_lock); | |
| return 0; | |
| } | |
| /** | |
| * iort_deregister_domain_token() - Deregister domain token based on ITS ID | |
| * @trans_id: ITS ID. | |
| * | |
| * Returns: none. | |
| */ | |
| void iort_deregister_domain_token(int trans_id) | |
| { | |
| struct iort_its_msi_chip *its_msi_chip, *t; | |
| spin_lock(&iort_msi_chip_lock); | |
| list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { | |
| if (its_msi_chip->translation_id == trans_id) { | |
| list_del(&its_msi_chip->list); | |
| kfree(its_msi_chip); | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_msi_chip_lock); | |
| } | |
| /** | |
| * iort_find_domain_token() - Find domain token based on given ITS ID | |
| * @trans_id: ITS ID. | |
| * | |
| * Returns: domain token when find on the list, NULL otherwise | |
| */ | |
| struct fwnode_handle *iort_find_domain_token(int trans_id) | |
| { | |
| struct fwnode_handle *fw_node = NULL; | |
| struct iort_its_msi_chip *its_msi_chip; | |
| spin_lock(&iort_msi_chip_lock); | |
| list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { | |
| if (its_msi_chip->translation_id == trans_id) { | |
| fw_node = its_msi_chip->fw_node; | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_msi_chip_lock); | |
| return fw_node; | |
| } | |
| static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, | |
| iort_find_node_callback callback, | |
| void *context) | |
| { | |
| struct acpi_iort_node *iort_node, *iort_end; | |
| struct acpi_table_iort *iort; | |
| int i; | |
| if (!iort_table) | |
| return NULL; | |
| /* Get the first IORT node */ | |
| iort = (struct acpi_table_iort *)iort_table; | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, | |
| iort->node_offset); | |
| iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, | |
| iort_table->length); | |
| for (i = 0; i < iort->node_count; i++) { | |
| if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, | |
| "IORT node pointer overflows, bad table!\n")) | |
| return NULL; | |
| if (iort_node->type == type && | |
| ACPI_SUCCESS(callback(iort_node, context))) | |
| return iort_node; | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, | |
| iort_node->length); | |
| } | |
| return NULL; | |
| } | |
| static acpi_status iort_match_node_callback(struct acpi_iort_node *node, | |
| void *context) | |
| { | |
| struct device *dev = context; | |
| acpi_status status = AE_NOT_FOUND; | |
| if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || | |
| node->type == ACPI_IORT_NODE_IWB) { | |
| struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| struct acpi_iort_named_component *ncomp; | |
| struct acpi_iort_iwb *iwb; | |
| struct device *cdev = dev; | |
| struct acpi_device *adev; | |
| const char *device_name; | |
| /* | |
| * Walk the device tree to find a device with an | |
| * ACPI companion; there is no point in scanning | |
| * IORT for a device matching a named component or IWB if | |
| * the device does not have an ACPI companion to | |
| * start with. | |
| */ | |
| do { | |
| adev = ACPI_COMPANION(cdev); | |
| if (adev) | |
| break; | |
| cdev = cdev->parent; | |
| } while (cdev); | |
| if (!adev) | |
| goto out; | |
| status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); | |
| if (ACPI_FAILURE(status)) { | |
| dev_warn(cdev, "Can't get device full path name\n"); | |
| goto out; | |
| } | |
| if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) { | |
| ncomp = (struct acpi_iort_named_component *)node->node_data; | |
| device_name = ncomp->device_name; | |
| } else { | |
| iwb = (struct acpi_iort_iwb *)node->node_data; | |
| device_name = iwb->device_name; | |
| } | |
| status = !strcmp(device_name, buf.pointer) ? AE_OK : AE_NOT_FOUND; | |
| acpi_os_free(buf.pointer); | |
| } else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { | |
| struct acpi_iort_root_complex *pci_rc; | |
| struct pci_bus *bus; | |
| bus = to_pci_bus(dev); | |
| pci_rc = (struct acpi_iort_root_complex *)node->node_data; | |
| /* | |
| * It is assumed that PCI segment numbers maps one-to-one | |
| * with root complexes. Each segment number can represent only | |
| * one root complex. | |
| */ | |
| status = pci_rc->pci_segment_number == pci_domain_nr(bus) ? | |
| AE_OK : AE_NOT_FOUND; | |
| } | |
| out: | |
| return status; | |
| } | |
| static acpi_status iort_match_iwb_callback(struct acpi_iort_node *node, void *context) | |
| { | |
| struct acpi_iort_iwb *iwb; | |
| u32 *id = context; | |
| if (node->type != ACPI_IORT_NODE_IWB) | |
| return AE_NOT_FOUND; | |
| iwb = (struct acpi_iort_iwb *)node->node_data; | |
| if (iwb->iwb_index != *id) | |
| return AE_NOT_FOUND; | |
| return AE_OK; | |
| } | |
| static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, | |
| u32 *rid_out, bool check_overlap) | |
| { | |
| /* Single mapping does not care for input id */ | |
| if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { | |
| if (type == ACPI_IORT_NODE_NAMED_COMPONENT || | |
| type == ACPI_IORT_NODE_IWB || | |
| type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { | |
| *rid_out = map->output_base; | |
| return 0; | |
| } | |
| pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", | |
| map, type); | |
| return -ENXIO; | |
| } | |
| if (rid_in < map->input_base || | |
| (rid_in > map->input_base + map->id_count)) | |
| return -ENXIO; | |
| if (check_overlap) { | |
| /* | |
| * We already found a mapping for this input ID at the end of | |
| * another region. If it coincides with the start of this | |
| * region, we assume the prior match was due to the off-by-1 | |
| * issue mentioned below, and allow it to be superseded. | |
| * Otherwise, things are *really* broken, and we just disregard | |
| * duplicate matches entirely to retain compatibility. | |
| */ | |
| pr_err(FW_BUG "[map %p] conflicting mapping for input ID 0x%x\n", | |
| map, rid_in); | |
| if (rid_in != map->input_base) | |
| return -ENXIO; | |
| pr_err(FW_BUG "applying workaround.\n"); | |
| } | |
| *rid_out = map->output_base + (rid_in - map->input_base); | |
| /* | |
| * Due to confusion regarding the meaning of the id_count field (which | |
| * carries the number of IDs *minus 1*), we may have to disregard this | |
| * match if it is at the end of the range, and overlaps with the start | |
| * of another one. | |
| */ | |
| if (map->id_count > 0 && rid_in == map->input_base + map->id_count) | |
| return -EAGAIN; | |
| return 0; | |
| } | |
| static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, | |
| u32 *id_out, int index) | |
| { | |
| struct acpi_iort_node *parent; | |
| struct acpi_iort_id_mapping *map; | |
| if (!node->mapping_offset || !node->mapping_count || | |
| index >= node->mapping_count) | |
| return NULL; | |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, | |
| node->mapping_offset + index * sizeof(*map)); | |
| /* Firmware bug! */ | |
| if (!map->output_reference) { | |
| pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", | |
| node, node->type); | |
| return NULL; | |
| } | |
| parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, | |
| map->output_reference); | |
| if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { | |
| if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || | |
| node->type == ACPI_IORT_NODE_IWB || | |
| node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || | |
| node->type == ACPI_IORT_NODE_SMMU_V3 || | |
| node->type == ACPI_IORT_NODE_PMCG) { | |
| *id_out = map->output_base; | |
| return parent; | |
| } | |
| } | |
| return NULL; | |
| } | |
| #ifndef ACPI_IORT_SMMU_V3_DEVICEID_VALID | |
| #define ACPI_IORT_SMMU_V3_DEVICEID_VALID (1 << 4) | |
| #endif | |
| static int iort_get_id_mapping_index(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| struct acpi_iort_pmcg *pmcg; | |
| switch (node->type) { | |
| case ACPI_IORT_NODE_SMMU_V3: | |
| /* | |
| * SMMUv3 dev ID mapping index was introduced in revision 1 | |
| * table, not available in revision 0 | |
| */ | |
| if (node->revision < 1) | |
| return -EINVAL; | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| /* | |
| * Until IORT E.e (node rev. 5), the ID mapping index was | |
| * defined to be valid unless all interrupts are GSIV-based. | |
| */ | |
| if (node->revision < 5) { | |
| if (smmu->event_gsiv && smmu->pri_gsiv && | |
| smmu->gerr_gsiv && smmu->sync_gsiv) | |
| return -EINVAL; | |
| } else if (!(smmu->flags & ACPI_IORT_SMMU_V3_DEVICEID_VALID)) { | |
| return -EINVAL; | |
| } | |
| if (smmu->id_mapping_index >= node->mapping_count) { | |
| pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", | |
| node, node->type); | |
| return -EINVAL; | |
| } | |
| return smmu->id_mapping_index; | |
| case ACPI_IORT_NODE_PMCG: | |
| pmcg = (struct acpi_iort_pmcg *)node->node_data; | |
| if (pmcg->overflow_gsiv || node->mapping_count == 0) | |
| return -EINVAL; | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, | |
| u32 id_in, u32 *id_out, | |
| u8 type_mask) | |
| { | |
| u32 id = id_in; | |
| /* Parse the ID mapping tree to find specified node type */ | |
| while (node) { | |
| struct acpi_iort_id_mapping *map; | |
| int i, index, rc = 0; | |
| u32 out_ref = 0, map_id = id; | |
| if (IORT_TYPE_MASK(node->type) & type_mask) { | |
| if (id_out) | |
| *id_out = id; | |
| return node; | |
| } | |
| if (!node->mapping_offset || !node->mapping_count) | |
| goto fail_map; | |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, | |
| node->mapping_offset); | |
| /* Firmware bug! */ | |
| if (!map->output_reference) { | |
| pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", | |
| node, node->type); | |
| goto fail_map; | |
| } | |
| /* | |
| * Get the special ID mapping index (if any) and skip its | |
| * associated ID map to prevent erroneous multi-stage | |
| * IORT ID translations. | |
| */ | |
| index = iort_get_id_mapping_index(node); | |
| /* Do the ID translation */ | |
| for (i = 0; i < node->mapping_count; i++, map++) { | |
| /* if it is special mapping index, skip it */ | |
| if (i == index) | |
| continue; | |
| rc = iort_id_map(map, node->type, map_id, &id, out_ref); | |
| if (!rc) | |
| break; | |
| if (rc == -EAGAIN) | |
| out_ref = map->output_reference; | |
| } | |
| if (i == node->mapping_count && !out_ref) | |
| goto fail_map; | |
| node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, | |
| rc ? out_ref : map->output_reference); | |
| } | |
| fail_map: | |
| /* Map input ID to output ID unchanged on mapping failure */ | |
| if (id_out) | |
| *id_out = id_in; | |
| return NULL; | |
| } | |
| static struct acpi_iort_node *iort_node_map_platform_id( | |
| struct acpi_iort_node *node, u32 *id_out, u8 type_mask, | |
| int index) | |
| { | |
| struct acpi_iort_node *parent; | |
| u32 id; | |
| /* step 1: retrieve the initial dev id */ | |
| parent = iort_node_get_id(node, &id, index); | |
| if (!parent) | |
| return NULL; | |
| /* | |
| * optional step 2: map the initial dev id if its parent is not | |
| * the target type we want, map it again for the use cases such | |
| * as NC (named component) -> SMMU -> ITS. If the type is matched, | |
| * return the initial dev id and its parent pointer directly. | |
| */ | |
| if (!(IORT_TYPE_MASK(parent->type) & type_mask)) | |
| parent = iort_node_map_id(parent, id, id_out, type_mask); | |
| else | |
| if (id_out) | |
| *id_out = id; | |
| return parent; | |
| } | |
| static struct acpi_iort_node *iort_find_dev_node(struct device *dev) | |
| { | |
| struct pci_bus *pbus; | |
| if (!dev_is_pci(dev)) { | |
| struct acpi_iort_node *node; | |
| /* | |
| * scan iort_fwnode_list to see if it's an iort platform | |
| * device (such as SMMU, PMCG),its iort node already cached | |
| * and associated with fwnode when iort platform devices | |
| * were initialized. | |
| */ | |
| node = iort_get_iort_node(dev->fwnode); | |
| if (node) | |
| return node; | |
| /* | |
| * if not, then it should be a platform device defined in | |
| * DSDT/SSDT (with Named Component node in IORT) or an | |
| * IWB device in the DSDT/SSDT. | |
| */ | |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, | |
| iort_match_node_callback, dev); | |
| if (node) | |
| return node; | |
| return iort_scan_node(ACPI_IORT_NODE_IWB, | |
| iort_match_node_callback, dev); | |
| } | |
| pbus = to_pci_dev(dev)->bus; | |
| return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, | |
| iort_match_node_callback, &pbus->dev); | |
| } | |
| /** | |
| * iort_msi_map_id() - Map a MSI input ID for a device | |
| * @dev: The device for which the mapping is to be done. | |
| * @input_id: The device input ID. | |
| * | |
| * Returns: mapped MSI ID on success, input ID otherwise | |
| */ | |
| u32 iort_msi_map_id(struct device *dev, u32 input_id) | |
| { | |
| struct acpi_iort_node *node; | |
| u32 dev_id; | |
| node = iort_find_dev_node(dev); | |
| if (!node) | |
| return input_id; | |
| iort_node_map_id(node, input_id, &dev_id, IORT_MSI_TYPE); | |
| return dev_id; | |
| } | |
| /** | |
| * iort_msi_xlate() - Map a MSI input ID for a device | |
| * @dev: The device for which the mapping is to be done. | |
| * @input_id: The device input ID. | |
| * @fwnode: Pointer to store the fwnode. | |
| * | |
| * Returns: mapped MSI ID on success, input ID otherwise | |
| * On success, the fwnode pointer is initialized to the MSI | |
| * controller fwnode handle. | |
| */ | |
| u32 iort_msi_xlate(struct device *dev, u32 input_id, struct fwnode_handle **fwnode) | |
| { | |
| struct acpi_iort_its_group *its; | |
| struct acpi_iort_node *node; | |
| u32 dev_id; | |
| node = iort_find_dev_node(dev); | |
| if (!node) | |
| return input_id; | |
| node = iort_node_map_id(node, input_id, &dev_id, IORT_MSI_TYPE); | |
| if (!node) | |
| return input_id; | |
| /* Move to ITS specific data */ | |
| its = (struct acpi_iort_its_group *)node->node_data; | |
| *fwnode = iort_find_domain_token(its->identifiers[0]); | |
| return dev_id; | |
| } | |
| int iort_its_translate_pa(struct fwnode_handle *node, phys_addr_t *base) | |
| { | |
| struct iort_its_msi_chip *its_msi_chip; | |
| int ret = -ENODEV; | |
| spin_lock(&iort_msi_chip_lock); | |
| list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { | |
| if (its_msi_chip->fw_node == node) { | |
| *base = its_msi_chip->base_addr; | |
| ret = 0; | |
| break; | |
| } | |
| } | |
| spin_unlock(&iort_msi_chip_lock); | |
| return ret; | |
| } | |
| static int __maybe_unused iort_find_its_base(u32 its_id, phys_addr_t *base) | |
| { | |
| struct fwnode_handle *fwnode = iort_find_domain_token(its_id); | |
| if (!fwnode) | |
| return -ENODEV; | |
| return iort_its_translate_pa(fwnode, base); | |
| } | |
| /** | |
| * iort_pmsi_get_msi_info() - Get the device id and translate frame PA for a device | |
| * @dev: The device for which the mapping is to be done. | |
| * @dev_id: The device ID found. | |
| * @pa: optional pointer to store translate frame address. | |
| * | |
| * Returns: 0 for successful devid and pa retrieval, -ENODEV on error | |
| */ | |
| int iort_pmsi_get_msi_info(struct device *dev, u32 *dev_id, phys_addr_t *pa) | |
| { | |
| struct acpi_iort_node *node, *parent = NULL; | |
| struct acpi_iort_its_group *its; | |
| int i, index; | |
| node = iort_find_dev_node(dev); | |
| if (!node) | |
| return -ENODEV; | |
| index = iort_get_id_mapping_index(node); | |
| /* if there is a valid index, go get the dev_id directly */ | |
| if (index >= 0) { | |
| parent = iort_node_get_id(node, dev_id, index); | |
| } else { | |
| for (i = 0; i < node->mapping_count; i++) { | |
| parent = iort_node_map_platform_id(node, dev_id, | |
| IORT_MSI_TYPE, i); | |
| if (parent) | |
| break; | |
| } | |
| } | |
| if (!parent) | |
| return -ENODEV; | |
| if (pa) { | |
| int ret; | |
| its = (struct acpi_iort_its_group *)node->node_data; | |
| ret = iort_find_its_base(its->identifiers[0], pa); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * iort_dev_find_its_id() - Find the ITS identifier for a device | |
| * @dev: The device. | |
| * @id: Device's ID | |
| * @idx: Index of the ITS identifier list. | |
| * @its_id: ITS identifier. | |
| * | |
| * Returns: 0 on success, appropriate error value otherwise | |
| */ | |
| static int iort_dev_find_its_id(struct device *dev, u32 id, | |
| unsigned int idx, int *its_id) | |
| { | |
| struct acpi_iort_its_group *its; | |
| struct acpi_iort_node *node; | |
| node = iort_find_dev_node(dev); | |
| if (!node) | |
| return -ENXIO; | |
| node = iort_node_map_id(node, id, NULL, IORT_MSI_TYPE); | |
| if (!node) | |
| return -ENXIO; | |
| /* Move to ITS specific data */ | |
| its = (struct acpi_iort_its_group *)node->node_data; | |
| if (idx >= its->its_count) { | |
| dev_err(dev, "requested ITS ID index [%d] overruns ITS entries [%d]\n", | |
| idx, its->its_count); | |
| return -ENXIO; | |
| } | |
| *its_id = its->identifiers[idx]; | |
| return 0; | |
| } | |
| /** | |
| * iort_get_device_domain() - Find MSI domain related to a device | |
| * @dev: The device. | |
| * @id: Requester ID for the device. | |
| * @bus_token: irq domain bus token. | |
| * | |
| * Returns: the MSI domain for this device, NULL otherwise | |
| */ | |
| struct irq_domain *iort_get_device_domain(struct device *dev, u32 id, | |
| enum irq_domain_bus_token bus_token) | |
| { | |
| struct fwnode_handle *handle; | |
| int its_id; | |
| if (iort_dev_find_its_id(dev, id, 0, &its_id)) | |
| return NULL; | |
| handle = iort_find_domain_token(its_id); | |
| if (!handle) | |
| return NULL; | |
| return irq_find_matching_fwnode(handle, bus_token); | |
| } | |
| acpi_handle iort_iwb_handle(u32 iwb_id) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_iwb *iwb; | |
| acpi_status status; | |
| acpi_handle handle; | |
| /* find its associated IWB node */ | |
| node = iort_scan_node(ACPI_IORT_NODE_IWB, iort_match_iwb_callback, &iwb_id); | |
| if (!node) | |
| return NULL; | |
| iwb = (struct acpi_iort_iwb *)node->node_data; | |
| status = acpi_get_handle(NULL, iwb->device_name, &handle); | |
| if (ACPI_FAILURE(status)) | |
| return NULL; | |
| return handle; | |
| } | |
| struct fwnode_handle *iort_iwb_handle_fwnode(u32 iwb_id) | |
| { | |
| struct fwnode_handle *fwnode; | |
| struct acpi_device *device; | |
| acpi_handle handle; | |
| handle = iort_iwb_handle(iwb_id); | |
| if (!handle) | |
| return NULL; | |
| device = acpi_get_acpi_dev(handle); | |
| if (!device) | |
| return NULL; | |
| fwnode = acpi_fwnode_handle(device); | |
| acpi_put_acpi_dev(device); | |
| return fwnode; | |
| } | |
| static void iort_set_device_domain(struct device *dev, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_its_group *its; | |
| struct acpi_iort_node *msi_parent; | |
| struct acpi_iort_id_mapping *map; | |
| struct fwnode_handle *iort_fwnode; | |
| struct irq_domain *domain; | |
| int index; | |
| index = iort_get_id_mapping_index(node); | |
| if (index < 0) | |
| return; | |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, | |
| node->mapping_offset + index * sizeof(*map)); | |
| /* Firmware bug! */ | |
| if (!map->output_reference || | |
| !(map->flags & ACPI_IORT_ID_SINGLE_MAPPING)) { | |
| pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", | |
| node, node->type); | |
| return; | |
| } | |
| msi_parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, | |
| map->output_reference); | |
| if (!msi_parent || msi_parent->type != ACPI_IORT_NODE_ITS_GROUP) | |
| return; | |
| /* Move to ITS specific data */ | |
| its = (struct acpi_iort_its_group *)msi_parent->node_data; | |
| iort_fwnode = iort_find_domain_token(its->identifiers[0]); | |
| if (!iort_fwnode) | |
| return; | |
| domain = irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); | |
| if (domain) | |
| dev_set_msi_domain(dev, domain); | |
| } | |
| /** | |
| * iort_get_platform_device_domain() - Find MSI domain related to a | |
| * platform device | |
| * @dev: the dev pointer associated with the platform device | |
| * | |
| * Returns: the MSI domain for this device, NULL otherwise | |
| */ | |
| static struct irq_domain *iort_get_platform_device_domain(struct device *dev) | |
| { | |
| struct acpi_iort_node *node, *msi_parent = NULL; | |
| struct fwnode_handle *iort_fwnode; | |
| struct acpi_iort_its_group *its; | |
| int i; | |
| /* find its associated iort node */ | |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, | |
| iort_match_node_callback, dev); | |
| if (!node) { | |
| /* find its associated iort node */ | |
| node = iort_scan_node(ACPI_IORT_NODE_IWB, | |
| iort_match_node_callback, dev); | |
| if (!node) | |
| return NULL; | |
| } | |
| /* then find its msi parent node */ | |
| for (i = 0; i < node->mapping_count; i++) { | |
| msi_parent = iort_node_map_platform_id(node, NULL, | |
| IORT_MSI_TYPE, i); | |
| if (msi_parent) | |
| break; | |
| } | |
| if (!msi_parent) | |
| return NULL; | |
| /* Move to ITS specific data */ | |
| its = (struct acpi_iort_its_group *)msi_parent->node_data; | |
| iort_fwnode = iort_find_domain_token(its->identifiers[0]); | |
| if (!iort_fwnode) | |
| return NULL; | |
| return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); | |
| } | |
| void acpi_configure_pmsi_domain(struct device *dev) | |
| { | |
| struct irq_domain *msi_domain; | |
| msi_domain = iort_get_platform_device_domain(dev); | |
| if (msi_domain) | |
| dev_set_msi_domain(dev, msi_domain); | |
| } | |
| #ifdef CONFIG_IOMMU_API | |
| static void iort_rmr_free(struct device *dev, | |
| struct iommu_resv_region *region) | |
| { | |
| struct iommu_iort_rmr_data *rmr_data; | |
| rmr_data = container_of(region, struct iommu_iort_rmr_data, rr); | |
| kfree(rmr_data->sids); | |
| kfree(rmr_data); | |
| } | |
| static struct iommu_iort_rmr_data *iort_rmr_alloc( | |
| struct acpi_iort_rmr_desc *rmr_desc, | |
| int prot, enum iommu_resv_type type, | |
| u32 *sids, u32 num_sids) | |
| { | |
| struct iommu_iort_rmr_data *rmr_data; | |
| struct iommu_resv_region *region; | |
| u32 *sids_copy; | |
| u64 addr = rmr_desc->base_address, size = rmr_desc->length; | |
| rmr_data = kmalloc_obj(*rmr_data); | |
| if (!rmr_data) | |
| return NULL; | |
| /* Create a copy of SIDs array to associate with this rmr_data */ | |
| sids_copy = kmemdup_array(sids, num_sids, sizeof(*sids), GFP_KERNEL); | |
| if (!sids_copy) { | |
| kfree(rmr_data); | |
| return NULL; | |
| } | |
| rmr_data->sids = sids_copy; | |
| rmr_data->num_sids = num_sids; | |
| if (!IS_ALIGNED(addr, SZ_64K) || !IS_ALIGNED(size, SZ_64K)) { | |
| /* PAGE align base addr and size */ | |
| addr &= PAGE_MASK; | |
| size = PAGE_ALIGN(size + offset_in_page(rmr_desc->base_address)); | |
| pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] not aligned to 64K, continue with [0x%llx - 0x%llx]\n", | |
| rmr_desc->base_address, | |
| rmr_desc->base_address + rmr_desc->length - 1, | |
| addr, addr + size - 1); | |
| } | |
| region = &rmr_data->rr; | |
| INIT_LIST_HEAD(®ion->list); | |
| region->start = addr; | |
| region->length = size; | |
| region->prot = prot; | |
| region->type = type; | |
| region->free = iort_rmr_free; | |
| return rmr_data; | |
| } | |
| static void iort_rmr_desc_check_overlap(struct acpi_iort_rmr_desc *desc, | |
| u32 count) | |
| { | |
| int i, j; | |
| for (i = 0; i < count; i++) { | |
| u64 end, start = desc[i].base_address, length = desc[i].length; | |
| if (!length) { | |
| pr_err(FW_BUG "RMR descriptor[0x%llx] with zero length, continue anyway\n", | |
| start); | |
| continue; | |
| } | |
| end = start + length - 1; | |
| /* Check for address overlap */ | |
| for (j = i + 1; j < count; j++) { | |
| u64 e_start = desc[j].base_address; | |
| u64 e_end = e_start + desc[j].length - 1; | |
| if (start <= e_end && end >= e_start) | |
| pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] overlaps, continue anyway\n", | |
| start, end); | |
| } | |
| } | |
| } | |
| /* | |
| * Please note, we will keep the already allocated RMR reserve | |
| * regions in case of a memory allocation failure. | |
| */ | |
| static void iort_get_rmrs(struct acpi_iort_node *node, | |
| struct acpi_iort_node *smmu, | |
| u32 *sids, u32 num_sids, | |
| struct list_head *head) | |
| { | |
| struct acpi_iort_rmr *rmr = (struct acpi_iort_rmr *)node->node_data; | |
| struct acpi_iort_rmr_desc *rmr_desc; | |
| int i; | |
| rmr_desc = ACPI_ADD_PTR(struct acpi_iort_rmr_desc, node, | |
| rmr->rmr_offset); | |
| iort_rmr_desc_check_overlap(rmr_desc, rmr->rmr_count); | |
| for (i = 0; i < rmr->rmr_count; i++, rmr_desc++) { | |
| struct iommu_iort_rmr_data *rmr_data; | |
| enum iommu_resv_type type; | |
| int prot = IOMMU_READ | IOMMU_WRITE; | |
| if (rmr->flags & ACPI_IORT_RMR_REMAP_PERMITTED) | |
| type = IOMMU_RESV_DIRECT_RELAXABLE; | |
| else | |
| type = IOMMU_RESV_DIRECT; | |
| if (rmr->flags & ACPI_IORT_RMR_ACCESS_PRIVILEGE) | |
| prot |= IOMMU_PRIV; | |
| /* Attributes 0x00 - 0x03 represents device memory */ | |
| if (ACPI_IORT_RMR_ACCESS_ATTRIBUTES(rmr->flags) <= | |
| ACPI_IORT_RMR_ATTR_DEVICE_GRE) | |
| prot |= IOMMU_MMIO; | |
| else if (ACPI_IORT_RMR_ACCESS_ATTRIBUTES(rmr->flags) == | |
| ACPI_IORT_RMR_ATTR_NORMAL_IWB_OWB) | |
| prot |= IOMMU_CACHE; | |
| rmr_data = iort_rmr_alloc(rmr_desc, prot, type, | |
| sids, num_sids); | |
| if (!rmr_data) | |
| return; | |
| list_add_tail(&rmr_data->rr.list, head); | |
| } | |
| } | |
| static u32 *iort_rmr_alloc_sids(u32 *sids, u32 count, u32 id_start, | |
| u32 new_count) | |
| { | |
| u32 *new_sids; | |
| u32 total_count = count + new_count; | |
| int i; | |
| new_sids = krealloc_array(sids, count + new_count, | |
| sizeof(*new_sids), GFP_KERNEL); | |
| if (!new_sids) { | |
| kfree(sids); | |
| return NULL; | |
| } | |
| for (i = count; i < total_count; i++) | |
| new_sids[i] = id_start++; | |
| return new_sids; | |
| } | |
| static bool iort_rmr_has_dev(struct device *dev, u32 id_start, | |
| u32 id_count) | |
| { | |
| int i; | |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); | |
| /* | |
| * Make sure the kernel has preserved the boot firmware PCIe | |
| * configuration. This is required to ensure that the RMR PCIe | |
| * StreamIDs are still valid (Refer: ARM DEN 0049E.d Section 3.1.1.5). | |
| */ | |
| if (dev_is_pci(dev)) { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pci_host_bridge *host = pci_find_host_bridge(pdev->bus); | |
| if (!host->preserve_config) | |
| return false; | |
| } | |
| for (i = 0; i < fwspec->num_ids; i++) { | |
| if (fwspec->ids[i] >= id_start && | |
| fwspec->ids[i] <= id_start + id_count) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void iort_node_get_rmr_info(struct acpi_iort_node *node, | |
| struct acpi_iort_node *iommu, | |
| struct device *dev, struct list_head *head) | |
| { | |
| struct acpi_iort_node *smmu = NULL; | |
| struct acpi_iort_rmr *rmr; | |
| struct acpi_iort_id_mapping *map; | |
| u32 *sids = NULL; | |
| u32 num_sids = 0; | |
| int i; | |
| if (!node->mapping_offset || !node->mapping_count) { | |
| pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n", | |
| node); | |
| return; | |
| } | |
| rmr = (struct acpi_iort_rmr *)node->node_data; | |
| if (!rmr->rmr_offset || !rmr->rmr_count) | |
| return; | |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, | |
| node->mapping_offset); | |
| /* | |
| * Go through the ID mappings and see if we have a match for SMMU | |
| * and dev(if !NULL). If found, get the sids for the Node. | |
| * Please note, id_count is equal to the number of IDs in the | |
| * range minus one. | |
| */ | |
| for (i = 0; i < node->mapping_count; i++, map++) { | |
| struct acpi_iort_node *parent; | |
| parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, | |
| map->output_reference); | |
| if (parent != iommu) | |
| continue; | |
| /* If dev is valid, check RMR node corresponds to the dev SID */ | |
| if (dev && !iort_rmr_has_dev(dev, map->output_base, | |
| map->id_count)) | |
| continue; | |
| /* Retrieve SIDs associated with the Node. */ | |
| sids = iort_rmr_alloc_sids(sids, num_sids, map->output_base, | |
| map->id_count + 1); | |
| if (!sids) | |
| return; | |
| num_sids += map->id_count + 1; | |
| } | |
| if (!sids) | |
| return; | |
| iort_get_rmrs(node, smmu, sids, num_sids, head); | |
| kfree(sids); | |
| } | |
| static void iort_find_rmrs(struct acpi_iort_node *iommu, struct device *dev, | |
| struct list_head *head) | |
| { | |
| struct acpi_table_iort *iort; | |
| struct acpi_iort_node *iort_node, *iort_end; | |
| int i; | |
| /* Only supports ARM DEN 0049E.d onwards */ | |
| if (iort_table->revision < 5) | |
| return; | |
| iort = (struct acpi_table_iort *)iort_table; | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, | |
| iort->node_offset); | |
| iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort, | |
| iort_table->length); | |
| for (i = 0; i < iort->node_count; i++) { | |
| if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, | |
| "IORT node pointer overflows, bad table!\n")) | |
| return; | |
| if (iort_node->type == ACPI_IORT_NODE_RMR) | |
| iort_node_get_rmr_info(iort_node, iommu, dev, head); | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, | |
| iort_node->length); | |
| } | |
| } | |
| /* | |
| * Populate the RMR list associated with a given IOMMU and dev(if provided). | |
| * If dev is NULL, the function populates all the RMRs associated with the | |
| * given IOMMU. | |
| */ | |
| static void iort_iommu_rmr_get_resv_regions(struct fwnode_handle *iommu_fwnode, | |
| struct device *dev, | |
| struct list_head *head) | |
| { | |
| struct acpi_iort_node *iommu; | |
| iommu = iort_get_iort_node(iommu_fwnode); | |
| if (!iommu) | |
| return; | |
| iort_find_rmrs(iommu, dev, head); | |
| } | |
| static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev) | |
| { | |
| struct acpi_iort_node *iommu; | |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); | |
| iommu = iort_get_iort_node(fwspec->iommu_fwnode); | |
| if (iommu && (iommu->type == ACPI_IORT_NODE_SMMU_V3)) { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| smmu = (struct acpi_iort_smmu_v3 *)iommu->node_data; | |
| if (smmu->model == ACPI_IORT_SMMU_V3_HISILICON_HI161X) | |
| return iommu; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Retrieve platform specific HW MSI reserve regions. | |
| * The ITS interrupt translation spaces (ITS_base + SZ_64K, SZ_64K) | |
| * associated with the device are the HW MSI reserved regions. | |
| */ | |
| static void iort_iommu_msi_get_resv_regions(struct device *dev, | |
| struct list_head *head) | |
| { | |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); | |
| struct acpi_iort_its_group *its; | |
| struct acpi_iort_node *iommu_node, *its_node = NULL; | |
| int i; | |
| iommu_node = iort_get_msi_resv_iommu(dev); | |
| if (!iommu_node) | |
| return; | |
| /* | |
| * Current logic to reserve ITS regions relies on HW topologies | |
| * where a given PCI or named component maps its IDs to only one | |
| * ITS group; if a PCI or named component can map its IDs to | |
| * different ITS groups through IORT mappings this function has | |
| * to be reworked to ensure we reserve regions for all ITS groups | |
| * a given PCI or named component may map IDs to. | |
| */ | |
| for (i = 0; i < fwspec->num_ids; i++) { | |
| its_node = iort_node_map_id(iommu_node, | |
| fwspec->ids[i], | |
| NULL, IORT_MSI_TYPE); | |
| if (its_node) | |
| break; | |
| } | |
| if (!its_node) | |
| return; | |
| /* Move to ITS specific data */ | |
| its = (struct acpi_iort_its_group *)its_node->node_data; | |
| for (i = 0; i < its->its_count; i++) { | |
| phys_addr_t base; | |
| if (!iort_find_its_base(its->identifiers[i], &base)) { | |
| int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO; | |
| struct iommu_resv_region *region; | |
| region = iommu_alloc_resv_region(base + SZ_64K, SZ_64K, | |
| prot, IOMMU_RESV_MSI, | |
| GFP_KERNEL); | |
| if (region) | |
| list_add_tail(®ion->list, head); | |
| } | |
| } | |
| } | |
| /** | |
| * iort_iommu_get_resv_regions - Generic helper to retrieve reserved regions. | |
| * @dev: Device from iommu_get_resv_regions() | |
| * @head: Reserved region list from iommu_get_resv_regions() | |
| */ | |
| void iort_iommu_get_resv_regions(struct device *dev, struct list_head *head) | |
| { | |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); | |
| iort_iommu_msi_get_resv_regions(dev, head); | |
| iort_iommu_rmr_get_resv_regions(fwspec->iommu_fwnode, dev, head); | |
| } | |
| /** | |
| * iort_get_rmr_sids - Retrieve IORT RMR node reserved regions with | |
| * associated StreamIDs information. | |
| * @iommu_fwnode: fwnode associated with IOMMU | |
| * @head: Resereved region list | |
| */ | |
| void iort_get_rmr_sids(struct fwnode_handle *iommu_fwnode, | |
| struct list_head *head) | |
| { | |
| iort_iommu_rmr_get_resv_regions(iommu_fwnode, NULL, head); | |
| } | |
| EXPORT_SYMBOL_GPL(iort_get_rmr_sids); | |
| /** | |
| * iort_put_rmr_sids - Free memory allocated for RMR reserved regions. | |
| * @iommu_fwnode: fwnode associated with IOMMU | |
| * @head: Resereved region list | |
| */ | |
| void iort_put_rmr_sids(struct fwnode_handle *iommu_fwnode, | |
| struct list_head *head) | |
| { | |
| struct iommu_resv_region *entry, *next; | |
| list_for_each_entry_safe(entry, next, head, list) | |
| entry->free(NULL, entry); | |
| } | |
| EXPORT_SYMBOL_GPL(iort_put_rmr_sids); | |
| static inline bool iort_iommu_driver_enabled(u8 type) | |
| { | |
| switch (type) { | |
| case ACPI_IORT_NODE_SMMU_V3: | |
| return IS_ENABLED(CONFIG_ARM_SMMU_V3); | |
| case ACPI_IORT_NODE_SMMU: | |
| return IS_ENABLED(CONFIG_ARM_SMMU); | |
| default: | |
| pr_warn("IORT node type %u does not describe an SMMU\n", type); | |
| return false; | |
| } | |
| } | |
| static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_root_complex *pci_rc; | |
| pci_rc = (struct acpi_iort_root_complex *)node->node_data; | |
| return pci_rc->ats_attribute & ACPI_IORT_ATS_SUPPORTED; | |
| } | |
| static bool iort_pci_rc_supports_canwbs(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_memory_access *memory_access; | |
| struct acpi_iort_root_complex *pci_rc; | |
| pci_rc = (struct acpi_iort_root_complex *)node->node_data; | |
| memory_access = | |
| (struct acpi_iort_memory_access *)&pci_rc->memory_properties; | |
| return memory_access->memory_flags & ACPI_IORT_MF_CANWBS; | |
| } | |
| static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node, | |
| u32 streamid) | |
| { | |
| struct fwnode_handle *iort_fwnode; | |
| /* If there's no SMMU driver at all, give up now */ | |
| if (!node || !iort_iommu_driver_enabled(node->type)) | |
| return -ENODEV; | |
| iort_fwnode = iort_get_fwnode(node); | |
| if (!iort_fwnode) | |
| return -ENODEV; | |
| /* | |
| * If the SMMU drivers are enabled but not loaded/probed | |
| * yet, this will defer. | |
| */ | |
| return acpi_iommu_fwspec_init(dev, streamid, iort_fwnode); | |
| } | |
| struct iort_pci_alias_info { | |
| struct device *dev; | |
| struct acpi_iort_node *node; | |
| }; | |
| static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data) | |
| { | |
| struct iort_pci_alias_info *info = data; | |
| struct acpi_iort_node *parent; | |
| u32 streamid; | |
| parent = iort_node_map_id(info->node, alias, &streamid, | |
| IORT_IOMMU_TYPE); | |
| return iort_iommu_xlate(info->dev, parent, streamid); | |
| } | |
| static void iort_named_component_init(struct device *dev, | |
| struct acpi_iort_node *node) | |
| { | |
| struct property_entry props[3] = {}; | |
| struct acpi_iort_named_component *nc; | |
| nc = (struct acpi_iort_named_component *)node->node_data; | |
| props[0] = PROPERTY_ENTRY_U32("pasid-num-bits", | |
| FIELD_GET(ACPI_IORT_NC_PASID_BITS, | |
| nc->node_flags)); | |
| if (nc->node_flags & ACPI_IORT_NC_STALL_SUPPORTED) | |
| props[1] = PROPERTY_ENTRY_BOOL("dma-can-stall"); | |
| if (device_create_managed_software_node(dev, props, NULL)) | |
| dev_warn(dev, "Could not add device properties\n"); | |
| } | |
| static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_node *parent; | |
| int err = -ENODEV, i = 0; | |
| u32 streamid = 0; | |
| do { | |
| parent = iort_node_map_platform_id(node, &streamid, | |
| IORT_IOMMU_TYPE, | |
| i++); | |
| if (parent) | |
| err = iort_iommu_xlate(dev, parent, streamid); | |
| } while (parent && !err); | |
| return err; | |
| } | |
| static int iort_nc_iommu_map_id(struct device *dev, | |
| struct acpi_iort_node *node, | |
| const u32 *in_id) | |
| { | |
| struct acpi_iort_node *parent; | |
| u32 streamid; | |
| parent = iort_node_map_id(node, *in_id, &streamid, IORT_IOMMU_TYPE); | |
| if (parent) | |
| return iort_iommu_xlate(dev, parent, streamid); | |
| return -ENODEV; | |
| } | |
| /** | |
| * iort_iommu_configure_id - Set-up IOMMU configuration for a device. | |
| * | |
| * @dev: device to configure | |
| * @id_in: optional input id const value pointer | |
| * | |
| * Returns: 0 on success, <0 on failure | |
| */ | |
| int iort_iommu_configure_id(struct device *dev, const u32 *id_in) | |
| { | |
| struct acpi_iort_node *node; | |
| int err = -ENODEV; | |
| if (dev_is_pci(dev)) { | |
| struct iommu_fwspec *fwspec; | |
| struct pci_bus *bus = to_pci_dev(dev)->bus; | |
| struct iort_pci_alias_info info = { .dev = dev }; | |
| node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, | |
| iort_match_node_callback, &bus->dev); | |
| if (!node) | |
| return -ENODEV; | |
| info.node = node; | |
| err = pci_for_each_dma_alias(to_pci_dev(dev), | |
| iort_pci_iommu_init, &info); | |
| fwspec = dev_iommu_fwspec_get(dev); | |
| if (fwspec && iort_pci_rc_supports_ats(node)) | |
| fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS; | |
| if (fwspec && iort_pci_rc_supports_canwbs(node)) | |
| fwspec->flags |= IOMMU_FWSPEC_PCI_RC_CANWBS; | |
| } else { | |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, | |
| iort_match_node_callback, dev); | |
| if (!node) | |
| return -ENODEV; | |
| err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) : | |
| iort_nc_iommu_map(dev, node); | |
| if (!err) | |
| iort_named_component_init(dev, node); | |
| } | |
| return err; | |
| } | |
| #else | |
| void iort_iommu_get_resv_regions(struct device *dev, struct list_head *head) | |
| { } | |
| int iort_iommu_configure_id(struct device *dev, const u32 *input_id) | |
| { return -ENODEV; } | |
| #endif | |
| static int nc_dma_get_range(struct device *dev, u64 *limit) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_named_component *ncomp; | |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, | |
| iort_match_node_callback, dev); | |
| if (!node) | |
| return -ENODEV; | |
| ncomp = (struct acpi_iort_named_component *)node->node_data; | |
| if (!ncomp->memory_address_limit) { | |
| pr_warn(FW_BUG "Named component missing memory address limit\n"); | |
| return -EINVAL; | |
| } | |
| *limit = ncomp->memory_address_limit >= 64 ? U64_MAX : | |
| (1ULL << ncomp->memory_address_limit) - 1; | |
| return 0; | |
| } | |
| static int rc_dma_get_range(struct device *dev, u64 *limit) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_root_complex *rc; | |
| struct pci_bus *pbus = to_pci_dev(dev)->bus; | |
| node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, | |
| iort_match_node_callback, &pbus->dev); | |
| if (!node || node->revision < 1) | |
| return -ENODEV; | |
| rc = (struct acpi_iort_root_complex *)node->node_data; | |
| if (!rc->memory_address_limit) { | |
| pr_warn(FW_BUG "Root complex missing memory address limit\n"); | |
| return -EINVAL; | |
| } | |
| *limit = rc->memory_address_limit >= 64 ? U64_MAX : | |
| (1ULL << rc->memory_address_limit) - 1; | |
| return 0; | |
| } | |
| /** | |
| * iort_dma_get_ranges() - Look up DMA addressing limit for the device | |
| * @dev: device to lookup | |
| * @limit: DMA limit result pointer | |
| * | |
| * Return: 0 on success, an error otherwise. | |
| */ | |
| int iort_dma_get_ranges(struct device *dev, u64 *limit) | |
| { | |
| if (dev_is_pci(dev)) | |
| return rc_dma_get_range(dev, limit); | |
| else | |
| return nc_dma_get_range(dev, limit); | |
| } | |
| static void __init acpi_iort_register_irq(int hwirq, const char *name, | |
| int trigger, | |
| struct resource *res) | |
| { | |
| int irq = acpi_register_gsi(NULL, hwirq, trigger, | |
| ACPI_ACTIVE_HIGH); | |
| if (irq <= 0) { | |
| pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, | |
| name); | |
| return; | |
| } | |
| res->start = irq; | |
| res->end = irq; | |
| res->flags = IORESOURCE_IRQ; | |
| res->name = name; | |
| } | |
| static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| /* Always present mem resource */ | |
| int num_res = 1; | |
| /* Retrieve SMMUv3 specific data */ | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| if (smmu->event_gsiv) | |
| num_res++; | |
| if (smmu->pri_gsiv) | |
| num_res++; | |
| if (smmu->gerr_gsiv) | |
| num_res++; | |
| if (smmu->sync_gsiv) | |
| num_res++; | |
| return num_res; | |
| } | |
| static bool arm_smmu_v3_is_combined_irq(struct acpi_iort_smmu_v3 *smmu) | |
| { | |
| /* | |
| * Cavium ThunderX2 implementation doesn't not support unique | |
| * irq line. Use single irq line for all the SMMUv3 interrupts. | |
| */ | |
| if (smmu->model != ACPI_IORT_SMMU_V3_CAVIUM_CN99XX) | |
| return false; | |
| /* | |
| * ThunderX2 doesn't support MSIs from the SMMU, so we're checking | |
| * SPI numbers here. | |
| */ | |
| return smmu->event_gsiv == smmu->pri_gsiv && | |
| smmu->event_gsiv == smmu->gerr_gsiv && | |
| smmu->event_gsiv == smmu->sync_gsiv; | |
| } | |
| static unsigned long arm_smmu_v3_resource_size(struct acpi_iort_smmu_v3 *smmu) | |
| { | |
| /* | |
| * Override the size, for Cavium ThunderX2 implementation | |
| * which doesn't support the page 1 SMMU register space. | |
| */ | |
| if (smmu->model == ACPI_IORT_SMMU_V3_CAVIUM_CN99XX) | |
| return SZ_64K; | |
| return SZ_128K; | |
| } | |
| static void __init arm_smmu_v3_init_resources(struct resource *res, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| int num_res = 0; | |
| /* Retrieve SMMUv3 specific data */ | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| res[num_res].start = smmu->base_address; | |
| res[num_res].end = smmu->base_address + | |
| arm_smmu_v3_resource_size(smmu) - 1; | |
| res[num_res].flags = IORESOURCE_MEM; | |
| num_res++; | |
| if (arm_smmu_v3_is_combined_irq(smmu)) { | |
| if (smmu->event_gsiv) | |
| acpi_iort_register_irq(smmu->event_gsiv, "combined", | |
| ACPI_EDGE_SENSITIVE, | |
| &res[num_res++]); | |
| } else { | |
| if (smmu->event_gsiv) | |
| acpi_iort_register_irq(smmu->event_gsiv, "eventq", | |
| ACPI_EDGE_SENSITIVE, | |
| &res[num_res++]); | |
| if (smmu->pri_gsiv) | |
| acpi_iort_register_irq(smmu->pri_gsiv, "priq", | |
| ACPI_EDGE_SENSITIVE, | |
| &res[num_res++]); | |
| if (smmu->gerr_gsiv) | |
| acpi_iort_register_irq(smmu->gerr_gsiv, "gerror", | |
| ACPI_EDGE_SENSITIVE, | |
| &res[num_res++]); | |
| if (smmu->sync_gsiv) | |
| acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync", | |
| ACPI_EDGE_SENSITIVE, | |
| &res[num_res++]); | |
| } | |
| } | |
| static void __init arm_smmu_v3_dma_configure(struct device *dev, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| enum dev_dma_attr attr; | |
| /* Retrieve SMMUv3 specific data */ | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| attr = (smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE) ? | |
| DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT; | |
| /* We expect the dma masks to be equivalent for all SMMUv3 set-ups */ | |
| dev->dma_mask = &dev->coherent_dma_mask; | |
| /* Configure DMA for the page table walker */ | |
| acpi_dma_configure(dev, attr); | |
| } | |
| #if defined(CONFIG_ACPI_NUMA) | |
| /* | |
| * set numa proximity domain for smmuv3 device | |
| */ | |
| static int __init arm_smmu_v3_set_proximity(struct device *dev, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu_v3 *smmu; | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { | |
| int dev_node = pxm_to_node(smmu->pxm); | |
| if (dev_node != NUMA_NO_NODE && !node_online(dev_node)) | |
| return -EINVAL; | |
| set_dev_node(dev, dev_node); | |
| pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", | |
| smmu->base_address, | |
| smmu->pxm); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define arm_smmu_v3_set_proximity NULL | |
| #endif | |
| static int __init arm_smmu_count_resources(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu *smmu; | |
| /* Retrieve SMMU specific data */ | |
| smmu = (struct acpi_iort_smmu *)node->node_data; | |
| /* | |
| * Only consider the global fault interrupt and ignore the | |
| * configuration access interrupt. | |
| * | |
| * MMIO address and global fault interrupt resources are always | |
| * present so add them to the context interrupt count as a static | |
| * value. | |
| */ | |
| return smmu->context_interrupt_count + 2; | |
| } | |
| static void __init arm_smmu_init_resources(struct resource *res, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu *smmu; | |
| int i, hw_irq, trigger, num_res = 0; | |
| u64 *ctx_irq, *glb_irq; | |
| /* Retrieve SMMU specific data */ | |
| smmu = (struct acpi_iort_smmu *)node->node_data; | |
| res[num_res].start = smmu->base_address; | |
| res[num_res].end = smmu->base_address + smmu->span - 1; | |
| res[num_res].flags = IORESOURCE_MEM; | |
| num_res++; | |
| glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset); | |
| /* Global IRQs */ | |
| hw_irq = IORT_IRQ_MASK(glb_irq[0]); | |
| trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[0]); | |
| acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger, | |
| &res[num_res++]); | |
| /* Context IRQs */ | |
| ctx_irq = ACPI_ADD_PTR(u64, node, smmu->context_interrupt_offset); | |
| for (i = 0; i < smmu->context_interrupt_count; i++) { | |
| hw_irq = IORT_IRQ_MASK(ctx_irq[i]); | |
| trigger = IORT_IRQ_TRIGGER_MASK(ctx_irq[i]); | |
| acpi_iort_register_irq(hw_irq, "arm-smmu-context", trigger, | |
| &res[num_res++]); | |
| } | |
| } | |
| static void __init arm_smmu_dma_configure(struct device *dev, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_smmu *smmu; | |
| enum dev_dma_attr attr; | |
| /* Retrieve SMMU specific data */ | |
| smmu = (struct acpi_iort_smmu *)node->node_data; | |
| attr = (smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK) ? | |
| DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT; | |
| /* We expect the dma masks to be equivalent for SMMU set-ups */ | |
| dev->dma_mask = &dev->coherent_dma_mask; | |
| /* Configure DMA for the page table walker */ | |
| acpi_dma_configure(dev, attr); | |
| } | |
| static int __init arm_smmu_v3_pmcg_count_resources(struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_pmcg *pmcg; | |
| /* Retrieve PMCG specific data */ | |
| pmcg = (struct acpi_iort_pmcg *)node->node_data; | |
| /* | |
| * There are always 2 memory resources. | |
| * If the overflow_gsiv is present then add that for a total of 3. | |
| */ | |
| return pmcg->overflow_gsiv ? 3 : 2; | |
| } | |
| static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res, | |
| struct acpi_iort_node *node) | |
| { | |
| struct acpi_iort_pmcg *pmcg; | |
| /* Retrieve PMCG specific data */ | |
| pmcg = (struct acpi_iort_pmcg *)node->node_data; | |
| res[0].start = pmcg->page0_base_address; | |
| res[0].end = pmcg->page0_base_address + SZ_4K - 1; | |
| res[0].flags = IORESOURCE_MEM; | |
| /* | |
| * The initial version in DEN0049C lacked a way to describe register | |
| * page 1, which makes it broken for most PMCG implementations; in | |
| * that case, just let the driver fail gracefully if it expects to | |
| * find a second memory resource. | |
| */ | |
| if (node->revision > 0) { | |
| res[1].start = pmcg->page1_base_address; | |
| res[1].end = pmcg->page1_base_address + SZ_4K - 1; | |
| res[1].flags = IORESOURCE_MEM; | |
| } | |
| if (pmcg->overflow_gsiv) | |
| acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow", | |
| ACPI_EDGE_SENSITIVE, &res[2]); | |
| } | |
| static struct acpi_platform_list pmcg_plat_info[] __initdata = { | |
| /* HiSilicon Hip08 Platform */ | |
| {"HISI ", "HIP08 ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001800, Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP08}, | |
| /* HiSilicon Hip09 Platform */ | |
| {"HISI ", "HIP09 ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP09}, | |
| {"HISI ", "HIP09A ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP09}, | |
| /* HiSilicon Hip10/11 Platform uses the same SMMU IP with Hip09 */ | |
| {"HISI ", "HIP10 ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP09}, | |
| {"HISI ", "HIP10C ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP09}, | |
| {"HISI ", "HIP11 ", 0, ACPI_SIG_IORT, greater_than_or_equal, | |
| "Erratum #162001900", IORT_SMMU_V3_PMCG_HISI_HIP09}, | |
| { } | |
| }; | |
| static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev) | |
| { | |
| u32 model; | |
| int idx; | |
| idx = acpi_match_platform_list(pmcg_plat_info); | |
| if (idx >= 0) | |
| model = pmcg_plat_info[idx].data; | |
| else | |
| model = IORT_SMMU_V3_PMCG_GENERIC; | |
| return platform_device_add_data(pdev, &model, sizeof(model)); | |
| } | |
| struct iort_dev_config { | |
| const char *name; | |
| int (*dev_init)(struct acpi_iort_node *node); | |
| void (*dev_dma_configure)(struct device *dev, | |
| struct acpi_iort_node *node); | |
| int (*dev_count_resources)(struct acpi_iort_node *node); | |
| void (*dev_init_resources)(struct resource *res, | |
| struct acpi_iort_node *node); | |
| int (*dev_set_proximity)(struct device *dev, | |
| struct acpi_iort_node *node); | |
| int (*dev_add_platdata)(struct platform_device *pdev); | |
| }; | |
| static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = { | |
| .name = "arm-smmu-v3", | |
| .dev_dma_configure = arm_smmu_v3_dma_configure, | |
| .dev_count_resources = arm_smmu_v3_count_resources, | |
| .dev_init_resources = arm_smmu_v3_init_resources, | |
| .dev_set_proximity = arm_smmu_v3_set_proximity, | |
| }; | |
| static const struct iort_dev_config iort_arm_smmu_cfg __initconst = { | |
| .name = "arm-smmu", | |
| .dev_dma_configure = arm_smmu_dma_configure, | |
| .dev_count_resources = arm_smmu_count_resources, | |
| .dev_init_resources = arm_smmu_init_resources, | |
| }; | |
| static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = { | |
| .name = "arm-smmu-v3-pmcg", | |
| .dev_count_resources = arm_smmu_v3_pmcg_count_resources, | |
| .dev_init_resources = arm_smmu_v3_pmcg_init_resources, | |
| .dev_add_platdata = arm_smmu_v3_pmcg_add_platdata, | |
| }; | |
| static __init const struct iort_dev_config *iort_get_dev_cfg( | |
| struct acpi_iort_node *node) | |
| { | |
| switch (node->type) { | |
| case ACPI_IORT_NODE_SMMU_V3: | |
| return &iort_arm_smmu_v3_cfg; | |
| case ACPI_IORT_NODE_SMMU: | |
| return &iort_arm_smmu_cfg; | |
| case ACPI_IORT_NODE_PMCG: | |
| return &iort_arm_smmu_v3_pmcg_cfg; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| /** | |
| * iort_add_platform_device() - Allocate a platform device for IORT node | |
| * @node: Pointer to device ACPI IORT node | |
| * @ops: Pointer to IORT device config struct | |
| * | |
| * Returns: 0 on success, <0 failure | |
| */ | |
| static int __init iort_add_platform_device(struct acpi_iort_node *node, | |
| const struct iort_dev_config *ops) | |
| { | |
| struct fwnode_handle *fwnode; | |
| struct platform_device *pdev; | |
| struct resource *r; | |
| int ret, count; | |
| pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO); | |
| if (!pdev) | |
| return -ENOMEM; | |
| if (ops->dev_set_proximity) { | |
| ret = ops->dev_set_proximity(&pdev->dev, node); | |
| if (ret) | |
| goto dev_put; | |
| } | |
| count = ops->dev_count_resources(node); | |
| r = kzalloc_objs(*r, count); | |
| if (!r) { | |
| ret = -ENOMEM; | |
| goto dev_put; | |
| } | |
| ops->dev_init_resources(r, node); | |
| ret = platform_device_add_resources(pdev, r, count); | |
| /* | |
| * Resources are duplicated in platform_device_add_resources, | |
| * free their allocated memory | |
| */ | |
| kfree(r); | |
| if (ret) | |
| goto dev_put; | |
| /* | |
| * Platform devices based on PMCG nodes uses platform_data to | |
| * pass the hardware model info to the driver. For others, add | |
| * a copy of IORT node pointer to platform_data to be used to | |
| * retrieve IORT data information. | |
| */ | |
| if (ops->dev_add_platdata) | |
| ret = ops->dev_add_platdata(pdev); | |
| else | |
| ret = platform_device_add_data(pdev, &node, sizeof(node)); | |
| if (ret) | |
| goto dev_put; | |
| fwnode = iort_get_fwnode(node); | |
| if (!fwnode) { | |
| ret = -ENODEV; | |
| goto dev_put; | |
| } | |
| platform_device_set_fwnode(pdev, fwnode); | |
| if (ops->dev_dma_configure) | |
| ops->dev_dma_configure(&pdev->dev, node); | |
| iort_set_device_domain(&pdev->dev, node); | |
| ret = platform_device_add(pdev); | |
| if (ret) | |
| goto dma_deconfigure; | |
| return 0; | |
| dma_deconfigure: | |
| arch_teardown_dma_ops(&pdev->dev); | |
| dev_put: | |
| platform_device_put(pdev); | |
| return ret; | |
| } | |
| #ifdef CONFIG_PCI | |
| static void __init iort_enable_acs(struct acpi_iort_node *iort_node) | |
| { | |
| static bool acs_enabled __initdata; | |
| if (acs_enabled) | |
| return; | |
| if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { | |
| struct acpi_iort_node *parent; | |
| struct acpi_iort_id_mapping *map; | |
| int i; | |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, iort_node, | |
| iort_node->mapping_offset); | |
| for (i = 0; i < iort_node->mapping_count; i++, map++) { | |
| if (!map->output_reference) | |
| continue; | |
| parent = ACPI_ADD_PTR(struct acpi_iort_node, | |
| iort_table, map->output_reference); | |
| /* | |
| * If we detect a RC->SMMU mapping, make sure | |
| * we enable ACS on the system. | |
| */ | |
| if ((parent->type == ACPI_IORT_NODE_SMMU) || | |
| (parent->type == ACPI_IORT_NODE_SMMU_V3)) { | |
| pci_request_acs(); | |
| acs_enabled = true; | |
| return; | |
| } | |
| } | |
| } | |
| } | |
| #else | |
| static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { } | |
| #endif | |
| static void __init iort_init_platform_devices(void) | |
| { | |
| struct acpi_iort_node *iort_node, *iort_end; | |
| struct acpi_table_iort *iort; | |
| struct fwnode_handle *fwnode; | |
| int i, ret; | |
| const struct iort_dev_config *ops; | |
| /* | |
| * iort_table and iort both point to the start of IORT table, but | |
| * have different struct types | |
| */ | |
| iort = (struct acpi_table_iort *)iort_table; | |
| /* Get the first IORT node */ | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, | |
| iort->node_offset); | |
| iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort, | |
| iort_table->length); | |
| for (i = 0; i < iort->node_count; i++) { | |
| if (iort_node >= iort_end) { | |
| pr_err("iort node pointer overflows, bad table\n"); | |
| return; | |
| } | |
| iort_enable_acs(iort_node); | |
| ops = iort_get_dev_cfg(iort_node); | |
| if (ops) { | |
| fwnode = acpi_alloc_fwnode_static(); | |
| if (!fwnode) | |
| return; | |
| iort_set_fwnode(iort_node, fwnode); | |
| ret = iort_add_platform_device(iort_node, ops); | |
| if (ret) { | |
| iort_delete_fwnode(iort_node); | |
| acpi_free_fwnode_static(fwnode); | |
| return; | |
| } | |
| } | |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, | |
| iort_node->length); | |
| } | |
| } | |
| u32 arch_acpi_add_auto_dep(acpi_handle handle) | |
| { | |
| return acpi_irq_add_auto_dep(handle); | |
| } | |
| void __init acpi_iort_init(void) | |
| { | |
| acpi_status status; | |
| /* iort_table will be used at runtime after the iort init, | |
| * so we don't need to call acpi_put_table() to release | |
| * the IORT table mapping. | |
| */ | |
| status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| const char *msg = acpi_format_exception(status); | |
| pr_err("Failed to get table, %s\n", msg); | |
| } | |
| return; | |
| } | |
| iort_init_platform_devices(); | |
| } | |
| #ifdef CONFIG_ZONE_DMA | |
| /* | |
| * Extract the highest CPU physical address accessible to all DMA masters in | |
| * the system. PHYS_ADDR_MAX is returned when no constrained device is found. | |
| */ | |
| phys_addr_t __init acpi_iort_dma_get_max_cpu_address(void) | |
| { | |
| phys_addr_t limit = PHYS_ADDR_MAX; | |
| struct acpi_iort_node *node, *end; | |
| struct acpi_table_iort *iort; | |
| acpi_status status; | |
| int i; | |
| if (acpi_disabled) | |
| return limit; | |
| status = acpi_get_table(ACPI_SIG_IORT, 0, | |
| (struct acpi_table_header **)&iort); | |
| if (ACPI_FAILURE(status)) | |
| return limit; | |
| node = ACPI_ADD_PTR(struct acpi_iort_node, iort, iort->node_offset); | |
| end = ACPI_ADD_PTR(struct acpi_iort_node, iort, iort->header.length); | |
| for (i = 0; i < iort->node_count; i++) { | |
| if (node >= end) | |
| break; | |
| switch (node->type) { | |
| struct acpi_iort_named_component *ncomp; | |
| struct acpi_iort_root_complex *rc; | |
| phys_addr_t local_limit; | |
| case ACPI_IORT_NODE_NAMED_COMPONENT: | |
| ncomp = (struct acpi_iort_named_component *)node->node_data; | |
| local_limit = DMA_BIT_MASK(ncomp->memory_address_limit); | |
| limit = min_not_zero(limit, local_limit); | |
| break; | |
| case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: | |
| if (node->revision < 1) | |
| break; | |
| rc = (struct acpi_iort_root_complex *)node->node_data; | |
| local_limit = DMA_BIT_MASK(rc->memory_address_limit); | |
| limit = min_not_zero(limit, local_limit); | |
| break; | |
| } | |
| node = ACPI_ADD_PTR(struct acpi_iort_node, node, node->length); | |
| } | |
| acpi_put_table(&iort->header); | |
| return limit; | |
| } | |
| #endif |