| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * ARM APMT table support. | |
| * Design document number: ARM DEN0117. | |
| * | |
| * Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES. | |
| * | |
| */ | |
| #define pr_fmt(fmt) "ACPI: APMT: " fmt | |
| #include <linux/acpi.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/platform_device.h> | |
| #include "init.h" | |
| #define DEV_NAME "arm-cs-arch-pmu" | |
| /* There can be up to 3 resources: page 0 and 1 address, and interrupt. */ | |
| #define DEV_MAX_RESOURCE_COUNT 3 | |
| /* Root pointer to the mapped APMT table */ | |
| static struct acpi_table_header *apmt_table; | |
| static int __init apmt_init_resources(struct resource *res, | |
| struct acpi_apmt_node *node) | |
| { | |
| int irq, trigger; | |
| int num_res = 0; | |
| res[num_res].start = node->base_address0; | |
| res[num_res].end = node->base_address0 + SZ_4K - 1; | |
| res[num_res].flags = IORESOURCE_MEM; | |
| num_res++; | |
| if (node->flags & ACPI_APMT_FLAGS_DUAL_PAGE) { | |
| res[num_res].start = node->base_address1; | |
| res[num_res].end = node->base_address1 + SZ_4K - 1; | |
| res[num_res].flags = IORESOURCE_MEM; | |
| num_res++; | |
| } | |
| if (node->ovflw_irq != 0) { | |
| trigger = (node->ovflw_irq_flags & ACPI_APMT_OVFLW_IRQ_FLAGS_MODE); | |
| trigger = (trigger == ACPI_APMT_OVFLW_IRQ_FLAGS_MODE_LEVEL) ? | |
| ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; | |
| irq = acpi_register_gsi(NULL, node->ovflw_irq, trigger, | |
| ACPI_ACTIVE_HIGH); | |
| if (irq <= 0) { | |
| pr_warn("APMT could not register gsi hwirq %d\n", irq); | |
| return num_res; | |
| } | |
| res[num_res].start = irq; | |
| res[num_res].end = irq; | |
| res[num_res].flags = IORESOURCE_IRQ; | |
| num_res++; | |
| } | |
| return num_res; | |
| } | |
| /** | |
| * apmt_add_platform_device() - Allocate a platform device for APMT node | |
| * @node: Pointer to device ACPI APMT node | |
| * @fwnode: fwnode associated with the APMT node | |
| * | |
| * Returns: 0 on success, <0 failure | |
| */ | |
| static int __init apmt_add_platform_device(struct acpi_apmt_node *node, | |
| struct fwnode_handle *fwnode) | |
| { | |
| struct platform_device *pdev; | |
| int ret, count, uid = node->id & INT_MAX; | |
| struct resource res[DEV_MAX_RESOURCE_COUNT]; | |
| if (uid != node->id) | |
| pr_warn("Unexpectedly large UID 0x%x, truncated to 0x%x\n", node->id, uid); | |
| pdev = platform_device_alloc(DEV_NAME, uid); | |
| if (!pdev) | |
| return -ENOMEM; | |
| memset(res, 0, sizeof(res)); | |
| count = apmt_init_resources(res, node); | |
| ret = platform_device_add_resources(pdev, res, count); | |
| if (ret) | |
| goto dev_put; | |
| /* | |
| * Add a copy of APMT node pointer to platform_data to be used to | |
| * retrieve APMT data information. | |
| */ | |
| ret = platform_device_add_data(pdev, &node, sizeof(node)); | |
| if (ret) | |
| goto dev_put; | |
| platform_device_set_fwnode(pdev, fwnode); | |
| ret = platform_device_add(pdev); | |
| if (ret) | |
| goto dev_put; | |
| return 0; | |
| dev_put: | |
| platform_device_put(pdev); | |
| return ret; | |
| } | |
| static int __init apmt_init_platform_devices(void) | |
| { | |
| struct acpi_apmt_node *apmt_node; | |
| struct acpi_table_apmt *apmt; | |
| struct fwnode_handle *fwnode; | |
| u64 offset, end; | |
| int ret; | |
| /* | |
| * apmt_table and apmt both point to the start of APMT table, but | |
| * have different struct types | |
| */ | |
| apmt = (struct acpi_table_apmt *)apmt_table; | |
| offset = sizeof(*apmt); | |
| end = apmt->header.length; | |
| while (offset < end) { | |
| apmt_node = ACPI_ADD_PTR(struct acpi_apmt_node, apmt, | |
| offset); | |
| fwnode = acpi_alloc_fwnode_static(); | |
| if (!fwnode) | |
| return -ENOMEM; | |
| ret = apmt_add_platform_device(apmt_node, fwnode); | |
| if (ret) { | |
| acpi_free_fwnode_static(fwnode); | |
| return ret; | |
| } | |
| offset += apmt_node->length; | |
| } | |
| return 0; | |
| } | |
| void __init acpi_apmt_init(void) | |
| { | |
| acpi_status status; | |
| int ret; | |
| /** | |
| * APMT table nodes will be used at runtime after the apmt init, | |
| * so we don't need to call acpi_put_table() to release | |
| * the APMT table mapping. | |
| */ | |
| status = acpi_get_table(ACPI_SIG_APMT, 0, &apmt_table); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| const char *msg = acpi_format_exception(status); | |
| pr_err("Failed to get APMT table, %s\n", msg); | |
| } | |
| return; | |
| } | |
| ret = apmt_init_platform_devices(); | |
| if (ret) { | |
| pr_err("Failed to initialize APMT platform devices, ret: %d\n", ret); | |
| acpi_put_table(apmt_table); | |
| } | |
| } |