| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs | |
| * | |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson | |
| * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes | |
| * 2000-2002 x86-64 support by Andi Kleen | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/sched.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/kernel.h> | |
| #include <linux/kstrtox.h> | |
| #include <linux/errno.h> | |
| #include <linux/wait.h> | |
| #include <linux/unistd.h> | |
| #include <linux/stddef.h> | |
| #include <linux/personality.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/user-return-notifier.h> | |
| #include <linux/uprobes.h> | |
| #include <linux/context_tracking.h> | |
| #include <linux/entry-common.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/rseq.h> | |
| #include <asm/processor.h> | |
| #include <asm/ucontext.h> | |
| #include <asm/fpu/signal.h> | |
| #include <asm/fpu/xstate.h> | |
| #include <asm/vdso.h> | |
| #include <asm/mce.h> | |
| #include <asm/sighandling.h> | |
| #include <asm/vm86.h> | |
| #include <asm/syscall.h> | |
| #include <asm/sigframe.h> | |
| #include <asm/signal.h> | |
| #include <asm/shstk.h> | |
| static inline int is_ia32_compat_frame(struct ksignal *ksig) | |
| { | |
| return IS_ENABLED(CONFIG_IA32_EMULATION) && | |
| ksig->ka.sa.sa_flags & SA_IA32_ABI; | |
| } | |
| static inline int is_ia32_frame(struct ksignal *ksig) | |
| { | |
| return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame(ksig); | |
| } | |
| static inline int is_x32_frame(struct ksignal *ksig) | |
| { | |
| return IS_ENABLED(CONFIG_X86_X32_ABI) && | |
| ksig->ka.sa.sa_flags & SA_X32_ABI; | |
| } | |
| /* | |
| * Enable all pkeys temporarily, so as to ensure that both the current | |
| * execution stack as well as the alternate signal stack are writeable. | |
| * The application can use any of the available pkeys to protect the | |
| * alternate signal stack, and we don't know which one it is, so enable | |
| * all. The PKRU register will be reset to init_pkru later in the flow, | |
| * in fpu__clear_user_states(), and it is the application's responsibility | |
| * to enable the appropriate pkey as the first step in the signal handler | |
| * so that the handler does not segfault. | |
| */ | |
| static inline u32 sig_prepare_pkru(void) | |
| { | |
| u32 orig_pkru = read_pkru(); | |
| write_pkru(0); | |
| return orig_pkru; | |
| } | |
| /* | |
| * Set up a signal frame. | |
| */ | |
| /* x86 ABI requires 16-byte alignment */ | |
| #define FRAME_ALIGNMENT 16UL | |
| #define MAX_FRAME_PADDING (FRAME_ALIGNMENT - 1) | |
| /* | |
| * Determine which stack to use.. | |
| */ | |
| void __user * | |
| get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size, | |
| void __user **fpstate) | |
| { | |
| struct k_sigaction *ka = &ksig->ka; | |
| int ia32_frame = is_ia32_frame(ksig); | |
| /* Default to using normal stack */ | |
| bool nested_altstack = on_sig_stack(regs->sp); | |
| bool entering_altstack = false; | |
| unsigned long math_size = 0; | |
| unsigned long sp = regs->sp; | |
| unsigned long buf_fx = 0; | |
| u32 pkru; | |
| /* redzone */ | |
| if (!ia32_frame) | |
| sp -= 128; | |
| /* This is the X/Open sanctioned signal stack switching. */ | |
| if (ka->sa.sa_flags & SA_ONSTACK) { | |
| /* | |
| * This checks nested_altstack via sas_ss_flags(). Sensible | |
| * programs use SS_AUTODISARM, which disables that check, and | |
| * programs that don't use SS_AUTODISARM get compatible. | |
| */ | |
| if (sas_ss_flags(sp) == 0) { | |
| sp = current->sas_ss_sp + current->sas_ss_size; | |
| entering_altstack = true; | |
| } | |
| } else if (ia32_frame && | |
| !nested_altstack && | |
| regs->ss != __USER_DS && | |
| !(ka->sa.sa_flags & SA_RESTORER) && | |
| ka->sa.sa_restorer) { | |
| /* This is the legacy signal stack switching. */ | |
| sp = (unsigned long) ka->sa.sa_restorer; | |
| entering_altstack = true; | |
| } | |
| sp = fpu__alloc_mathframe(sp, ia32_frame, &buf_fx, &math_size); | |
| *fpstate = (void __user *)sp; | |
| sp -= frame_size; | |
| if (ia32_frame) | |
| /* | |
| * Align the stack pointer according to the i386 ABI, | |
| * i.e. so that on function entry ((sp + 4) & 15) == 0. | |
| */ | |
| sp = ((sp + 4) & -FRAME_ALIGNMENT) - 4; | |
| else | |
| sp = round_down(sp, FRAME_ALIGNMENT) - 8; | |
| /* | |
| * If we are on the alternate signal stack and would overflow it, don't. | |
| * Return an always-bogus address instead so we will die with SIGSEGV. | |
| */ | |
| if (unlikely((nested_altstack || entering_altstack) && | |
| !__on_sig_stack(sp))) { | |
| if (show_unhandled_signals && printk_ratelimit()) | |
| pr_info("%s[%d] overflowed sigaltstack\n", | |
| current->comm, task_pid_nr(current)); | |
| return (void __user *)-1L; | |
| } | |
| /* Update PKRU to enable access to the alternate signal stack. */ | |
| pkru = sig_prepare_pkru(); | |
| /* save i387 and extended state */ | |
| if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size, pkru)) { | |
| /* | |
| * Restore PKRU to the original, user-defined value; disable | |
| * extra pkeys enabled for the alternate signal stack, if any. | |
| */ | |
| write_pkru(pkru); | |
| return (void __user *)-1L; | |
| } | |
| return (void __user *)sp; | |
| } | |
| /* | |
| * There are four different struct types for signal frame: sigframe_ia32, | |
| * rt_sigframe_ia32, rt_sigframe_x32, and rt_sigframe. Use the worst case | |
| * -- the largest size. It means the size for 64-bit apps is a bit more | |
| * than needed, but this keeps the code simple. | |
| */ | |
| #if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION) | |
| # define MAX_FRAME_SIGINFO_UCTXT_SIZE sizeof(struct sigframe_ia32) | |
| #else | |
| # define MAX_FRAME_SIGINFO_UCTXT_SIZE sizeof(struct rt_sigframe) | |
| #endif | |
| /* | |
| * The FP state frame contains an XSAVE buffer which must be 64-byte aligned. | |
| * If a signal frame starts at an unaligned address, extra space is required. | |
| * This is the max alignment padding, conservatively. | |
| */ | |
| #define MAX_XSAVE_PADDING 63UL | |
| /* | |
| * The frame data is composed of the following areas and laid out as: | |
| * | |
| * ------------------------- | |
| * | alignment padding | | |
| * ------------------------- | |
| * | (f)xsave frame | | |
| * ------------------------- | |
| * | fsave header | | |
| * ------------------------- | |
| * | alignment padding | | |
| * ------------------------- | |
| * | siginfo + ucontext | | |
| * ------------------------- | |
| */ | |
| /* max_frame_size tells userspace the worst case signal stack size. */ | |
| static unsigned long __ro_after_init max_frame_size; | |
| static unsigned int __ro_after_init fpu_default_state_size; | |
| static int __init init_sigframe_size(void) | |
| { | |
| fpu_default_state_size = fpu__get_fpstate_size(); | |
| max_frame_size = MAX_FRAME_SIGINFO_UCTXT_SIZE + MAX_FRAME_PADDING; | |
| max_frame_size += fpu_default_state_size + MAX_XSAVE_PADDING; | |
| /* Userspace expects an aligned size. */ | |
| max_frame_size = round_up(max_frame_size, FRAME_ALIGNMENT); | |
| pr_info("max sigframe size: %lu\n", max_frame_size); | |
| return 0; | |
| } | |
| early_initcall(init_sigframe_size); | |
| unsigned long get_sigframe_size(void) | |
| { | |
| return max_frame_size; | |
| } | |
| static int | |
| setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) | |
| { | |
| /* Perform fixup for the pre-signal frame. */ | |
| rseq_signal_deliver(ksig, regs); | |
| /* Set up the stack frame */ | |
| if (is_ia32_frame(ksig)) { | |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) | |
| return ia32_setup_rt_frame(ksig, regs); | |
| else | |
| return ia32_setup_frame(ksig, regs); | |
| } else if (is_x32_frame(ksig)) { | |
| return x32_setup_rt_frame(ksig, regs); | |
| } else { | |
| return x64_setup_rt_frame(ksig, regs); | |
| } | |
| } | |
| static void | |
| handle_signal(struct ksignal *ksig, struct pt_regs *regs) | |
| { | |
| bool stepping, failed; | |
| struct fpu *fpu = x86_task_fpu(current); | |
| if (v8086_mode(regs)) | |
| save_v86_state((struct kernel_vm86_regs *) regs, VM86_SIGNAL); | |
| /* Are we from a system call? */ | |
| if (syscall_get_nr(current, regs) != -1) { | |
| /* If so, check system call restarting.. */ | |
| switch (syscall_get_error(current, regs)) { | |
| case -ERESTART_RESTARTBLOCK: | |
| case -ERESTARTNOHAND: | |
| regs->ax = -EINTR; | |
| break; | |
| case -ERESTARTSYS: | |
| if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { | |
| regs->ax = -EINTR; | |
| break; | |
| } | |
| fallthrough; | |
| case -ERESTARTNOINTR: | |
| regs->ax = regs->orig_ax; | |
| regs->ip -= 2; | |
| break; | |
| } | |
| } | |
| /* | |
| * If TF is set due to a debugger (TIF_FORCED_TF), clear TF now | |
| * so that register information in the sigcontext is correct and | |
| * then notify the tracer before entering the signal handler. | |
| */ | |
| stepping = test_thread_flag(TIF_SINGLESTEP); | |
| if (stepping) | |
| user_disable_single_step(current); | |
| failed = (setup_rt_frame(ksig, regs) < 0); | |
| if (!failed) { | |
| /* | |
| * Clear the direction flag as per the ABI for function entry. | |
| * | |
| * Clear RF when entering the signal handler, because | |
| * it might disable possible debug exception from the | |
| * signal handler. | |
| * | |
| * Clear TF for the case when it wasn't set by debugger to | |
| * avoid the recursive send_sigtrap() in SIGTRAP handler. | |
| */ | |
| regs->flags &= ~(X86_EFLAGS_DF|X86_EFLAGS_RF|X86_EFLAGS_TF); | |
| /* | |
| * Ensure the signal handler starts with the new fpu state. | |
| */ | |
| fpu__clear_user_states(fpu); | |
| } | |
| signal_setup_done(failed, ksig, stepping); | |
| } | |
| static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs) | |
| { | |
| #ifdef CONFIG_IA32_EMULATION | |
| if (current->restart_block.arch_data & TS_COMPAT) | |
| return __NR_ia32_restart_syscall; | |
| #endif | |
| #ifdef CONFIG_X86_X32_ABI | |
| return __NR_restart_syscall | (regs->orig_ax & __X32_SYSCALL_BIT); | |
| #else | |
| return __NR_restart_syscall; | |
| #endif | |
| } | |
| /* | |
| * Note that 'init' is a special process: it doesn't get signals it doesn't | |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by | |
| * mistake. | |
| */ | |
| void arch_do_signal_or_restart(struct pt_regs *regs) | |
| { | |
| struct ksignal ksig; | |
| if (get_signal(&ksig)) { | |
| /* Whee! Actually deliver the signal. */ | |
| handle_signal(&ksig, regs); | |
| return; | |
| } | |
| /* Did we come from a system call? */ | |
| if (syscall_get_nr(current, regs) != -1) { | |
| /* Restart the system call - no handlers present */ | |
| switch (syscall_get_error(current, regs)) { | |
| case -ERESTARTNOHAND: | |
| case -ERESTARTSYS: | |
| case -ERESTARTNOINTR: | |
| regs->ax = regs->orig_ax; | |
| regs->ip -= 2; | |
| break; | |
| case -ERESTART_RESTARTBLOCK: | |
| regs->ax = get_nr_restart_syscall(regs); | |
| regs->ip -= 2; | |
| break; | |
| } | |
| } | |
| /* | |
| * If there's no signal to deliver, we just put the saved sigmask | |
| * back. | |
| */ | |
| restore_saved_sigmask(); | |
| } | |
| void signal_fault(struct pt_regs *regs, void __user *frame, char *where) | |
| { | |
| struct task_struct *me = current; | |
| if (show_unhandled_signals && printk_ratelimit()) { | |
| printk("%s" | |
| "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", | |
| task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG, | |
| me->comm, me->pid, where, frame, | |
| regs->ip, regs->sp, regs->orig_ax); | |
| print_vma_addr(KERN_CONT " in ", regs->ip); | |
| pr_cont("\n"); | |
| } | |
| force_sig(SIGSEGV); | |
| } | |
| #ifdef CONFIG_DYNAMIC_SIGFRAME | |
| #ifdef CONFIG_STRICT_SIGALTSTACK_SIZE | |
| static bool strict_sigaltstack_size __ro_after_init = true; | |
| #else | |
| static bool strict_sigaltstack_size __ro_after_init = false; | |
| #endif | |
| static int __init strict_sas_size(char *arg) | |
| { | |
| return kstrtobool(arg, &strict_sigaltstack_size) == 0; | |
| } | |
| __setup("strict_sas_size", strict_sas_size); | |
| /* | |
| * MINSIGSTKSZ is 2048 and can't be changed despite the fact that AVX512 | |
| * exceeds that size already. As such programs might never use the | |
| * sigaltstack they just continued to work. While always checking against | |
| * the real size would be correct, this might be considered a regression. | |
| * | |
| * Therefore avoid the sanity check, unless enforced by kernel | |
| * configuration or command line option. | |
| * | |
| * When dynamic FPU features are supported, the check is also enforced when | |
| * the task has permissions to use dynamic features. Tasks which have no | |
| * permission are checked against the size of the non-dynamic feature set | |
| * if strict checking is enabled. This avoids forcing all tasks on the | |
| * system to allocate large sigaltstacks even if they are never going | |
| * to use a dynamic feature. As this is serialized via sighand::siglock | |
| * any permission request for a dynamic feature either happened already | |
| * or will see the newly install sigaltstack size in the permission checks. | |
| */ | |
| bool sigaltstack_size_valid(size_t ss_size) | |
| { | |
| unsigned long fsize = max_frame_size - fpu_default_state_size; | |
| u64 mask; | |
| lockdep_assert_held(¤t->sighand->siglock); | |
| if (!fpu_state_size_dynamic() && !strict_sigaltstack_size) | |
| return true; | |
| fsize += x86_task_fpu(current->group_leader)->perm.__user_state_size; | |
| if (likely(ss_size > fsize)) | |
| return true; | |
| if (strict_sigaltstack_size) | |
| return ss_size > fsize; | |
| mask = x86_task_fpu(current->group_leader)->perm.__state_perm; | |
| if (mask & XFEATURE_MASK_USER_DYNAMIC) | |
| return ss_size > fsize; | |
| return true; | |
| } | |
| #endif /* CONFIG_DYNAMIC_SIGFRAME */ |